Citrix Useful Commands

Download as txt, pdf, or txt
Download as txt, pdf, or txt
You are on page 1of 2

FTP 10.3.12.

rlcrp:cell=KA21151; // To see live traffic on the cell


rxtcp:cell=KA21151,moty=rxotg; // To find out TG of a cell
rxcdp:mo=rxotg-25; // To see details of TRXs in the TG
rxmop:mo=rxotrx-25-3; // To see TRX 3 of TG 25 belongs to what cell
rxmop:mo=rxotg-1; // To see TG details including Rsite, Confact,
Combiner type, BTS Model etc
rxmop:mo=rxotf-17; // To see TF status of TG 17 and its Synch
Source
rxmsp:mo=rxocf-25; // To see basic params of the TG
rxapp:mo=rxotg-131; // To see Abis Path Status

rlolp:cell=Ka20693; // To see locating params including UL/OL


rllop:cell=lh11631; // To see UL/OL params with fBOFFSET etc
rlsbp:cell=lh122011; // To obtain C1 C2 params
rlssp:cell=ka20671; // To see SACH and BCCH data
rlchp:cell=ps49242; // To see hopping data
rldhp:cell=ps49242; // To see DHA params
rldmp:cell=ps49242; // To see DYMA params
rlllp:cell=lh10761; // To see SCLD params
rlchp:cell=ka20723; // To see BCCD, cell config hopping data
rllcp:cell=lh10661; // To see CLS Params
rlgap:cell=ka20441; // To see SAS settings per CHGR
(QUALITY/MAIO/MULTI)
rlimp:cell=all; // To see ICM state and limits
rlacp:cell=me30903; // To see ACLC Data

===================MSC COMMANDS===========

hgsdp:msisdn=923214005040; // To see IMSI in HLR


mgbrp:imsi=410070220009124; // To see if MTR is enabled in this MSC on this
IMSI
mgcep:bsc=BSCH02; // To see all cells connected with BSCH02 in the
current MSC
mgocp:cell=all; // To see Outer cells in the current MSC
mgbsp:bsc=all; // To see all BSCs in the current MSC
MGCEP:CELL=ALL;
============================================
RLDEP:CELL=cell;!Definition of cell/how the cell is geconfigureerd!
RLSTP:CELL=cell;!Cell status active/halted!
RLCFP:CELL=cell;!Cell freq!
RLCRP:CELL=cell;!Channels!
RLNCP:CELL=cell;!Internal Neighbours!
RLNRP:CELL=cell,CELLR=ALL,nodata;!Internal and External Ncells!
RLMFP:CELL=cell;!Measuring (neighb)Freq!

RRTPP:TRAPOOL=ALL; //Gives details of all Transcoders being used


in the BSC along with their definitions

IMLIT:SPG=0;!In-output Macine link Transfer!


SDTDP:RPTID=122,OBJTYPE=CELTCHF,OBJ=cell,INT=2;!TCH establishment!
SDTDP:RPTID=124,OBJTYPE=CLSDCCH,OBJ=cell,INT=2;!SDCCH establishment!
SDTDP:RPTID=120,OBJTYPE=NCELLREL,OBJ=a05741-t04772,INT=30; !Internal ncell rel!
SDTDP:RPTID=121,OBJTYPE=NECELLREL,OBJ=n08023-u11171,INT=30; !External ncell rel!
SDTDP:RPTID=122,INT=30;!Do it for the whole bsc!
END;!End of imlit!

RXTCP:MOTY=RXOTG,CELL=cell;!find the TG number of the cell (TRX)!


RXMFP:MO=RXOCF-43;!Positie van de TRX,s in het cabinet!
RXELP:MO=RXOTG-43;!History of alarms on that cell!
RXCDP:MO=RXOTG-43;!To view Configuration data of the TG number, including XRANGE
and TCC!
RXMOP:MOTY=RXOTX;!Status van de TRX's en Time Slots enz!

SAAEP:SAE=522,BLOCK=RQCD;!Internal Ncell limit in a BSC!


SAAEP:SAE=523,BLOCK=RQCD;!External Ncell limit in a BSC!
SAAEP:SAE=299;!External cell limit in a BSC!
SAAEP:SAE=298;!Internal cell limit in a BSC!

RAEPP:id=all; // To see optional exchange params in BSC like


CALLDROPMSC
RABRP:RID=BARID00;!or ...=ALL;!Status of the BA recording, Idle or recording!
RABTI:RID=BARID00;!or ...=ALL;!Gerecorded (data) report naar scherm of file!
RABDP:RID=BARID00;!or ...=ALL;!Druk recording resultaten af op het scherm!
RABIE:RID=BARID00;!or ...=ALL;!Makes the reports idle to re-record a new BA!

RLLCP:CELL=cell;!Status of cell load sharing (CLS) for a cell!


!RLLCI:CELL=cell;!To start cell load sharing (initiate)!!
!RLLCE:CELL=cell;!To end cell load sharing!!
!Change default value's, standard for 7 and 14 TCH's!
!RLLCC:CELL=sourcecell,CLSLEVEL=20,CLSACC=40,HOCLSACC=on,RHYST=75,CLSRAMP=5;!
!RLLCC:CELL=targetcell,CLSLEVEL=20,CLSACC=40,HOCLSACC=on,RHYST=75,CLSRAMP=5;!

RLBDP:CELL=cell;!Configuration BPC data!


RLBCP:CELL=cell;!Dynamic BTS Power Control, cell data!
RLCPP:CELL=cell;!Configuration BPC data! // BSPWRB and BSPWRT

!IntegrationCheck CELL BROADCASTING!


RLCFP:CELL=N08983;!CBCH BCCH SDCCH AGBLK!
RLCRP:CELL=N08983;!CBCH BCCH SDCCH AGBLK!
RLDEP:CELL=N08983;!DEFINITION OF CELL/HOW THE CELL IS GECONFIGUREERD!
!RLCCC:CELL=N08983,CBCH=YES;TO CHANGE THE CBCH NO TO YES!

!To figur out the IMSI or VLR address!


HGSDP:MSISDN=31626084233,ALL;

rownum = Right(frstadrsAdress, strlen - Dollarpos)

You might also like