Scribd Logo
Upload

Welcome to Scribd!

  • 96 views

    DRFM As An Electronic Countermeasure For RADAR

    Uploaded by

    sophie
    DRFM is an electronic warfare technique that uses digital radio frequency memory to deceive radar systems and provide incorrect target information. It works by artificially shifting the frequency, phase, amplitude, or polarization of received radar signals and retransmitting them. This causes the radar to make incorrect deductions about properties of the target like material, velocity, and range. DRFM systems sample radar signals using high-speed ADCs and FPGAs to quickly and accurately capture signals and generate retransmitted waves using techniques like direct digital synthesis. They are implemented using RF front-ends containing antennas, filters, amplifiers, and other components to receive and retransmit radar signals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DRFM As An Electronic Countermeasure For RADAR

    Uploaded by

    sophie
    96 views3 pages
    DRFM is an electronic warfare technique that uses digital radio frequency memory to deceive radar systems and provide incorrect target information. It works by artificially shifting the frequency, phase, amplitude, or polarization of received radar signals and retransmitting them. This causes the radar to make incorrect deductions about properties of the target like material, velocity, and range. DRFM systems sample radar signals using high-speed ADCs and FPGAs to quickly and accurately capture signals and generate retransmitted waves using techniques like direct digital synthesis. They are implemented using RF front-ends containing antennas, filters, amplifiers, and other components to receive and retransmit radar signals.

    Original Description:

    DRFM as an Electronic Countermeasure for RADAR

    Original Title

    DRFM as an Electronic Countermeasure for RADAR

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    DRFM is an electronic warfare technique that uses digital radio frequency memory to deceive radar systems and provide incorrect target information. It works by artificially shifting the frequency, phase, amplitude, or polarization of received radar signals and retransmitting them. This causes the radar to make incorrect deductions about properties of the target like material, velocity, and range. DRFM systems sample radar signals using high-speed ADCs and FPGAs to quickly and accurately capture signals and generate retransmitted waves using techniques like direct digital synthesis. They are implemented using RF front-ends containing antennas, filters, amplifiers, and other components to receive and retransmit radar signals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    96 views3 pages

    DRFM As An Electronic Countermeasure For RADAR

    Uploaded by

    sophie
    DRFM is an electronic warfare technique that uses digital radio frequency memory to deceive radar systems and provide incorrect target information. It works by artificially shifting the frequency, phase, amplitude, or polarization of received radar signals and retransmitting them. This causes the radar to make incorrect deductions about properties of the target like material, velocity, and range. DRFM systems sample radar signals using high-speed ADCs and FPGAs to quickly and accurately capture signals and generate retransmitted waves using techniques like direct digital synthesis. They are implemented using RF front-ends containing antennas, filters, amplifiers, and other components to receive and retransmit radar signals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    DRFM as an Electronic Countermeasure for RADAR

    Introduction

    RADAR is a ubiquitous technology used for everything from weather mapping to catching
    speeders on the highway. In the military, RADAR is one of the primary technologies used for engaging
    targets with missiles or anti-aircraft fire. The ability to deceive target locking RADAR can keep friendly
    pilots safe and allow them to carry out their mission. Techniques like “dumb jamming” are useful for
    taking a RADAR installation out of commission, but more sophisticated electronic warfare attacks can
    make the enemy think their RADAR is still working when it is actually reporting incorrect target range
    and velocity information. This paper reviews a particular technique of that variety called digital radio
    frequency memory (DRFM) and discusses available systems that use it, its operating principals, and
    methods for implementation.

    Available DRFM Modules

    Since DRFM modules use bleeding edge techniques, the kinds of modules available and their
    functions are often classified. However, there are at least two modules that have public details. The first is
    offered by a British company called Herley and operates from 6-18 GHz. It has a bandwidth of 400 MHz,
    a built in Doppler modulator, and can be used as flight hardware or by itself as part of a hardware-in-the-
    loop simulator [1]. It is easily controlled using a standard interface to a computer, and is rack mountable.
    The output power is 0 dBm, so it requires an external amplifier and antenna.

    A second module that has public information available is made by an American company called
    Kor Electronics. It has 1 GHz bandwidth and built in real time Doppler, amplitude, phase, and multi-
    scatter simulation [2]. Kor lets the customer define the range of frequency operation, but it can be as low
    as 20 MHz or as high as 18 GHz. No public information is available on the exact cost of either the Herley
    or Kor modules, but according to the Department of Defense, costs for such modules can range from
    $150,000 to $700,000 per system depending on capability [3]. The mean time to fail of such systems is
    greater than 500 hours, and all systems cover at least the 7-11 GHz band. Higher end systems cover the 2-
    18 GHz band.

    Technology of DRFM

    The principals behind DRFM take advantage of the assumptions a RADAR system makes when
    identifying a target. The first assumption a RADAR makes is that the only possible reasons for a shift in
    frequency, phase, amplitude, or polarization is due to a reflection off of a material with a very different
    permittivity than air [4]. DRFM defeats this assumption by artificially shifting any or all of those physical
    wave properties and sending them back to the RADAR [5]. This causes the RADAR to make incorrect
    deductions about the material, velocity, and range of what it thinks are reflections off of a surface.
    Another assumption that RADAR makes is that electronic countermeasures used against it will not be
    able to keep up with the sliding time slot that it samples in and that the countermeasure won’t be able to
    find the RADAR’s frequency precisely enough. This was true before 1999, when DRFM systems first
    came into use [6]. With the proliferation of high dynamic range ADCs, fast FPGAs, and more efficient
    processors, it is now possible to very quickly and effectively find a RADARs frequency and keep up with
    its sampling rate [7].

    Implementation Methods

    RADAR pulses are often very high frequency, so it’s important to have an extremely fast
    sampling and processing abilities. All RFDM modules have fast ADCs with high dynamic range which
    feed directly into a large, fast FPGA like a Virtex-5 [2]. To actually receive and retransmit the RADAR
    signal, an RF frontend is necessary. A typical RF frontend will contain an antenna, filter or filter bank,
    amplifier, and if the design is superheterodyne, a mixer and LO [8]. DRFM for more advanced RADARs
    that use techniques like pulse compression involves detecting any additional modulation imparted to the
    incident waveform and accurately recreating it using Direct Digital Synthesis (DDS) in real time [9].
    Handling advanced RADAR signals like pulse compression is active area of research, almost all of which
    is classified.
    [1] Herley, 6-18 GHz DRFM Subsystem Specification Sheet. Nov. 1999. [Online]. Available:
    http://www.herley.com/pdfs/drfm.pdf. [Accessed: Jan. 22, 2013].

    [2] Kor Electronics, Wideband Digital RF Memory. Jan. 2012. [Online]. Available:
    http://www.rhombustechnologies.com.au/10bit%20Insert%20FINAL.pdf. [Accessed: Jan. 22, 2013].

    [3] Small Business Innovation Research, Navy Direct Digital Radio Frequency Conversion Digital Radio
    Frequency Memory. Jan. 2, 2013. [Online]. Available:
    http://www.dodsbir.net/sitis/display_topic.asp?Bookmark=43277. [Accessed: Jan. 22, 2013].

    [4] Penley, Bill, Early Radar History – an Introduction”. Cambridge, MA: MIT Press, 2002.

    [5] Sun Guoying; Li Yunjie; Gao Meiguo; , "An Improved DRFM System Based on Digital Channelized
    Receiver," Image and Signal Processing, 2009. CISP '09. 2nd International Congress on , vol., no., pp.1-
    5, 17-19 Oct. 2009

    [6] Watson, Charles, “A Comparison of DDS and DRFM Techniques in the Generation of “Smart Noise”
    Jamming Waveforms”, M.S. thesis, Naval Postgraduate School, Monterey, CA, 1996.

    [7] SPEC, ADEP T4000. July 24, 2012. [Online]. Available: http://www.spec.com/content/view/91/1/.
    [Accessed: Jan. 22, 2013].

    [8] Navy, “Introduction to Naval Weapons Engineering”. Washington, DC: Office of Headquarters
    Operations, 2005.

    [9] National Air Intelligence Center, “Design of Phase Quantization Digital Radio Frequency
    Memories”. Beijing, China, 1995.

    You might also like