PPE PGSR3i Beagle Datasheet
PPE PGSR3i Beagle Datasheet
PPE PGSR3i Beagle Datasheet
PGSR-3i ‘Beagle’ is a unique lightweight man-portable radar, which is capable of intercepting, detecting and tracking targets
moving on or close to the ground. It can also classify and differentiate targets based on their size and movement characteristics.
Benefits
5 minutes to set up and ready for operation low weight, small dimensions
standalone or network usage mountable on vehicles
easy integration into systems cover areas hardly approachable by vehicles
The radar is a versatile, cost-effective solution offering a multitude of advantages making it an ideal choice for borde guard,
battlefield surveillance, civilian and military installation security and combat operations duties.
PGRSR-3i ‘Beagle’ can be carried in backpacks by two-man teams to cover areas hardly approachable by vehicles. It is
also mountable on vehicles and on field posts as needed. It can be used as a standalone unit or in network of radars as
required by the specifics of the surveillance scenario.
The radar is very durable, capable of withstanding a wide range of environmental factors and is also very reliable, with only
a minimal chance of malfunctioning (MTBF > 10000 hours). Due to its operating principles PGSR-3i ‘Beagle’ has minimal
possibility of being jammed or intercepted (LPI - Low Probability of Intercept).
Overview
The highly advanced DSP technologies integrated in PGSR-3i ‘Beagle’ differentiate between moving and stationary tar-
gets; determine the exact parameters of the detections and control the adaptive surveillance parameters during chang-
ing environmental conditions.
The radar is controlled from the operator unit or command center. The radar’s control software is capable of utilizing
various map formats and displaying the detected targets over the map. The software is designed in a user friendly way,
it is easy to use even for untrained operators. The software supports the integration of this single radar into complex
multisensor systems. Every surveillance data and user interaction is recorded and can be replayed for further analysis.
Technical parameters
Scanning modes Sector (6° – 346°) Power Requirements 28 VDC (22 – 33V DC), max. 50 W
Continuous (n x 360°) Continuous Operation on 10 – 12 h
Scan Rate 7°/sec and 14°/sec One Set of Batteries
© 2015 Pro Patria Electronics. All rights reserved. This document may not be copied in any form without permission from Pro Patria Electronics. Information in this document is subject to
change without notice. PGSR-3i ‘Beagle’ and PSR-2i ‘Doberman’ are trademarks of Pro Patria Electronics. All other trade and service marks are the property of their respective holders.