Scribd
Upload
104 views

BSC Commands

This document contains logging and configuration commands for a radio access network. It includes commands to check event logs, load distribution, GPRS configuration and status, alarms, cell/BTS status and resetting, transceiver and traffic information, and MSC queries. The commands are for checking information and configuration of cells, BTS, transceivers, frequencies, alarms, traffic levels and MSCs in the network.

Uploaded by

maih_w
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
104 views

BSC Commands

This document contains logging and configuration commands for a radio access network. It includes commands to check event logs, load distribution, GPRS configuration and status, alarms, cell/BTS status and resetting, transceiver and traffic information, and MSC queries. The commands are for checking information and configuration of cells, BTS, transceivers, frequencies, alarms, traffic levels and MSCs in the network.

Uploaded by

maih_w
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

RALLP:NUMEVENT=ALL; ! CTH LOAD DISTRIBUTION EVENT LOG DATA - G16B !

RALLP:NOEVENT=ALL; ! CTH LOAD DISTRIBUTION EVENT LOG DATA - G14B!


<RALDP:RP=ALL; ! CTH LOAD DISTRIBUTION !
EXRPP:RP=32&&38;

GPRS:
exrpp:rp=all; --> check RP value
exemp:rp=xx,em=all;
rlgse:cell=xx; --> disable GPRS
rlgsi:cell=xx; --> enable GPRSbl
rpi:rp-xx,forced -> block RP
blrpe:rp-xx; -> unblock RPBTS
reset:rxasp:mo=rxotg-xx; --> check alarms
rxtcp:mo=rxotg-xx; --> check status
rxmsp:mo=rxotg-xx-x,subord;
rxbli:mo=rxotrx-xx-x,subord,force; --> lockingr
xese:mo=rxotrx-xx-x,subord;
rlstp:cell=<7digitcellname>; --> check status
rlstc:cell=<7digitcellname>,state=<active or halted>; --> reset cell/BTS
rxmop:moty=rxotg; output TG tranceiver group = BCF
rldep:cell=all; print LAC/CI rxtcp:mo=rxotg-39; check if 900/1800 G1=900 D1=1800
rxmop:mo=rxotrx-39-0&&-11; count TRX rxasp:mo=rxotg-39; check alarms
rxtcp:mo=rxotg-<tg#>; ---cell name
rldep:cell=<cellname>; -----cell ID,SAC, LAC
rxcdp:mo=rxotg-<tg#>; ----know the config, UNLOCK
rxtcp:moty=rxotg;----------all site
rxasp:mo=rxotg-<tg#>;-----alarms
allip:acl=a1;----------------all alarms
rxmop:mo=rxotrx-26-0&&-11; ------know the TRX counts
rxmop:moty=rxotg;--------know all site
rlcrp:cell=<site name> -----traffic query
rlcfp:cell=BSCRZG1; freq
rltdp:msc=all; -MSC query
rxmfp:mo=rxotf-<tg#>; specific alarm

EXRPP:RP=ALL;

You might also like