Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    GTX Restraint Analysis Check:: 1.0 Loadings

    Uploaded by

    Cris Banda
    This document summarizes the analysis of restraints used for a concrete structure. It calculates the pressure on the structure from hydrostatic forces and determines that the pressure is below the maximum allowable. It then calculates the tension forces on two restraints based on the wall thickness and spacing. Both restraints pass with a utilization ratio below 100%, indicating the restraints are adequately sized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GTX Restraint Analysis Check:: 1.0 Loadings

    Uploaded by

    Cris Banda
    38 views1 page
    This document summarizes the analysis of restraints used for a concrete structure. It calculates the pressure on the structure from hydrostatic forces and determines that the pressure is below the maximum allowable. It then calculates the tension forces on two restraints based on the wall thickness and spacing. Both restraints pass with a utilization ratio below 100%, indicating the restraints are adequately sized.

    Original Description:

    GTX Restraint Analysis

    Original Title

    GTX Restraint Analysis

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the analysis of restraints used for a concrete structure. It calculates the pressure on the structure from hydrostatic forces and determines that the pressure is below the maximum allowable. It then calculates the tension forces on two restraints based on the wall thickness and spacing. Both restraints pass with a utilization ratio below 100%, indicating the restraints are adequately sized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views1 page

    GTX Restraint Analysis Check:: 1.0 Loadings

    Uploaded by

    Cris Banda
    This document summarizes the analysis of restraints used for a concrete structure. It calculates the pressure on the structure from hydrostatic forces and determines that the pressure is below the maximum allowable. It then calculates the tension forces on two restraints based on the wall thickness and spacing. Both restraints pass with a utilization ratio below 100%, indicating the restraints are adequately sized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    GTX Restraint Analysis Check:

    Code: CIRIA Report 108

    1.0 Loadings:

    - Concrete Pressure Analysis: GTX Restraint

    Pcal= 63.07 kPa D[C1 R + C2K H-C1 R ]


    Pmax = 140.00 kPa Dh, pressure
    14.19
    Pd = 63.07 kPa <---- Calculated Design pressure 14.19
    Hz = 140.16 m Height of Hydrostatic Zone
    H -Hz = 3.08 m Maximum Pressure Height
    1.00

    2.0 Analysis:
    14.1 14.1
    T= 1.00 m Thickness of Wall/ Column 1.00
    Sp = 0.45 m Vertical Spacing of GTX Restraint

    F= 28.38 kN Total Tension force applied on GTX Restraint

    T1 = 14.19 kN Tension Force on GTX 1

    0.45
    T2 = 14.19 kN Tension Force on GTX 2

    3.0 Remarks:

    0.45
    Tmax = 14.19 kN Maximum Tension Force
    AWL = 20.00 kN Allowable Working Load

    0.45
    Remarks = Passed! unitless Remarks on GTX Restraint
    Uti = 71% unitless Utilization Ratio

    You might also like