TECHNICAL ADVISORY BOARD MEMBERS TRAINING IN ASNT LEVEL II

&
Mr.C.Pandurangan Mr.J.Sanjeevi Perumal
Chief Executive and Technical Advisor
Saudi ARAMCO Approved
The EEN Advisory Board Member
Quality Control Engineer
PLACEMENT IN QA / QC, PIPING
QA/QC Manager
Kingdom of Saudi Arabia
Kingdom of Bahrain
WELDING & NDT
[email protected] [email protected]

Mr.N.G.Gobi Venkata Krishnan Mr.Karthick Daniel

The EEN Advisory Board Member The EEN Advisory Board Member
Advanced NDT Engineer QA/QC Sr.Engineer
PCN Level-3 UT, PCN Level-2 PAUT ASNT Level-II, CSWIP 3.1
CSWIP Level-2 LRUT.,Singapore Dubai, United Arab Emirates

[email protected] [email protected]

Mr. Santhosh Daniel Mr.Arvinth Kumar

The EEN Advisory Board Member The EEN Advisory Board Member
NDT Inspector (Multi Task) Welding Inspector,
ASNT Level-II, PCN Level II ASNT Level-II, CSWIP 3.1 & 3.2
Dubai, United Arab Emirates ISO 9001-2015 Lead Auditor
Dammam, Kingdom of Saudi Arabia
[email protected] [email protected]

Mr.Salai Karuppaiah Mr.Ilavarasan

The EEN Advisory Board Member The EEN Advisory Board Member
QA/QC Welding Inspector QA/QC Sr.Engineer
ASNT Level-II, CSWIP 3.1 ASNT Level-II,AWS-CWI
Haradh, Kingdom of Saudi Arabia Al-Khobar, Kingdom of Saudi Arabia

[email protected] [email protected]

Mr.V M Krishnamoorthi
CHIEF TRAINER

CSWIP 3.1 Certified Welding Inspector (TWI, UK)
ASNT Level 2 (RT, UT, PT, MPT, RTFI & VT)
[email protected]

#.17-A, K.R.R Nivas

2nd Floor, Above Bioline Laboratory
Civil Aerodrome Road & Post
SITRA, Coimbatore-641 014

Phone No : +91-422 422 0053

THE ENGINEERS EDGE Mobile :
:
+91-87 54 486222 WWW.ENGINEERSEDGENDT.IN
INSTITUTE OF NDT E-mail [email protected]
Website : www.engineersedgendt.in

Gateway to a Career in Oil & Gas, Petrochemical and Refineries

 RADIOGRAPHIC TESTING (RT) ULTRASONIC TESTING (UT)
Introduction
The Engineers Edge Institute of NDT is a NDT expertise founded in the year 2016 by experts to serve in the industry.
It is the leading training institute for ASNT level II equipped with updated instrumental facility. It is a NDT training
center which provides variety of training and certification for the students and employees. We are the only training
center providing 100% placement assistance to the candidates until they are placed. Our trainers are having more
than Eight years of field experience in industries like petroleum refineries and power plant (nuclear & thermal). Our
institute is designed with very well infrastructure to enlighten the knowledge of candidates using simulators, animation
and power point presentations. The candidates will get both theoretical and practical during the Training session.
Our candidates will get a globally authentication certificates from ASNT American Society for Non Destructive Testing
Radiographic testing involves the use of penetrating X or Ultrasonic testing uses the transmission of high frequency sound
level II as per SNT-TC-1A, 2016 Edition standard on successful completion of training and practical exams.
gamma radiation to examine the parts and products for waves into a material to detect imperfections within the material
imperfections. An X-ray machine or radioactive isotope is or changes in material properties. The commonly used ultrasonic
used as a source of radiation. Radiation is directed through testing is pulse echo, wherein sound is introduce into the object
Vision a part and on to the filmfor finding defects and reflections are analyzed to find the internal imperfections
Possess high quality international standard training on Non-Destructive Testing in accordance with quality management
system and pursuing placement for the right candidates to enrich their career. THICKNESS MEASUREMENT PENETRANT TESTING (PT)
Transforming the students to a real mechanical engineers. Enhancing their skills by Training with assistance
and guidance and counseling these are our motives.

Mission
Increase the Employability rate of Mechanical Engineers
To provide training and placement for Candidates in diversified fields with flexibility. To give quality training for
the trainees to make their life and career delightful. We train the candidates to reach their career and knowledge to
the destination with ASME/AWS/API/TWI Standards One of the most widespread NDT methods in mechanical Penetrant testing is a widely applied and low-cost inspection method
equipment of industrial installations for the characterization used to locate surface-breaking defects in all non-porous materials
Quality Policy of erosion and deterioration is the thickness measurements (metals, plastics, or ceramics).The liquid penetrant testing is probably
with the Ultrasonic method. Thickness measurement is the most widely used NDT Method. The test object or material is coated
The quality of the training can be calibarated with our equipment,drawing, specification and standard. We have access
achieved by placing the UT probe on the object surface. with a visible or fluorescent dye solution.The developer acts like a blotter.
to national and international standards. We also train and guide the candidates for various stages so that the quality
Local or general reductions of thickness can be located It draws penetrant out of the imperfections which are open to the surface.
of jobs / service is excellent.
and measured with high precision. With visible dyes, the vivid color contrast between the penetrant.

About Our Training MAGNETIC PARTICLE TESTING (MPT) VISUAL TESTING (VT)

 Course delivered by ASNT Certified Level II professional only.
 Seats are limited to 15 in the main classroom for personal interaction with the instructor.
 Using Latest methods for Candidates to Understand Well
 Courses based on the Recommended practice No.SNT-TC 1A,2016 Edition of the ASNT (www.asnt.org).
 Qualifications awarded to the successful candidates carry international recognition and acceptance.
 Candidates are tested for the understanding level & trained till their comprehension.
 Medium of instruction in English.
Magnetic Particle testing is done by inducing a magnetic field Visual testing is the most commonly used test method in industry.
Training & Certification in a ferromagnetic material and dusting the surface with iron Because most test methods require that the operator look at the
 ASNT Level I & II particles.Surface imperfections will distort the magnetic field surface of the part being inspected,visual inspection is inherent
and concentrate the iron particles, near the imperfections, in most of the other test methods. As the name implies, VT
 QA / QC Training
thus indicating their presence. Magnetic Particle Testing is involves the visual observation of Athe surface of a test object to
 Welder Qualification Training used to detect surface & subsurface defects. Magnetic evaluate the presence of surface discontinuities. It is considered
Particle Testing can be performed only on ferromagnetic material. as the oldest andcheapest NDT method.

Human Resource ‐ Placements
RADIOGRAPHIC FILM INTERPRETATION (RTFI) QA / QC TRAINING
When the student completes the training successfully, the candidates are placed well in the industry in India & Overseas.
We have relationship with major companies in India & Overseas, we have constant requirement for Job positions. Quality assurance (QA) is a way of preventing mistakes or defects
in manufactured products and avoiding problems when delivering
1.QA/QC Manager
solutions or services to customers.QA is applied to physical products
2.QA/QC Engineer
in pre-production to verify what will be made meets specifications
3.QA/QC Inspector
and requirements, and during manufacturing production runs by
4.QA/QC Inspector (Welding)
validating lot samples meet specified
5.QA/QC Inspector (Piping)
6.NDT Technician
The Course is designed for the certified level II RT Personnel.
7.NDT Inspector
Various codes and standards are included along with a number Quality control, or QC for short, is a process by which entities review
8.NDT Engineer
of radiographs containing natural defects. (ASME Sec VIII, the quality of all factors involved in production. Quality control
9.QA/QC Painting Inspector
API 1104, AWS D1.1, ASME B31.3).Radiographic films with emphasizes testing of products to uncover defects and reporting to
10.NDT Co-Ordinator
natural and artificial discontinuities in welds are being provided management who make the decision to allow or deny product
11.Welding Foreman
for the practical. Detailed Acceptance – Rejection criteria release, whereas quality assurance attempts to improve and
12.Welding Supervisor
are being discussed during the class for a clear understanding stabilize production (and associated processes)