ShineServer User Manual

目录
1. Manual Information.................................................................................................................. 2

1.1 Copyright Notice ............................................................................................................... 2

1.2 About the manual ............................................................................................................. 3

1.3 for Readers.............................................................................................................................. 3

1.4 guide ....................................................................................................................................... 3

2, ShineServer presentation.............................................................................................................. 4

2.1 range ....................................................................................................................................... 4

2.2 Features .................................................................................................................................. 4

2.3 Conditions of Use .................................................................................................................... 4

3. Use ShineServer ............................................................................................................................ 5

3.1 Language Settings ............................................................................................................... 5

3.2 Register ................................................................................................................................... 5

3.2.1 Requirements .................................................................................................................. 5

3.2.2 registration steps ............................................................................................................. 6

3.3 Login, quit ............................................................................................................................... 7

3.3.1 Login................................................................................................................................. 7

3.3.2 Exit ................................................................................................................................... 8

4, the user interface .......................................................................................................................... 8

5, set up power plant ........................................................................................................................ 9

5.1 New Power Station ............................................................................................................... 10

5.1.1 Installation Information ................................................................................................. 11

5.1.2 Set Geographic Information .......................................................................................... 11

5.1.3 Setting income formula ................................................................................................. 12

5.1.4 Station Map ................................................................................................................... 12

6, add the data logger ..................................................................................................................... 13

7, the user interface and the main menu bar Intro ........................................................................ 18
 7.1 Station selection ................................................................................................................... 18

7.2 Dashboard ............................................................................................................................. 19

7.3 Plant ...................................................................................................................................... 19

7.3.1 Job Information ............................................................................................................. 19

7.3.2 Device Manager ............................................................................................................. 21

7.3.3 Event Log ....................................................................................................................... 27

7.3.4 System Status................................................................................................................. 28

7.3.5 Station Details ................................................................................................................ 29

7.4 Users ..................................................................................................................................... 30

7.4.1 Station Overview ........................................................................................................... 30

7.4.2 User Information ........................................................................................................... 31

7.5 Setting ................................................................................................................................... 33

7.5.1 Dashboard settings ........................................................................................................ 33

7.5.2 mailbox settings ............................................................................................................. 34

7.6 download .............................................................................................................................. 35

7.6.1 File Download ................................................................................................................ 35

7.6.2 Download....................................................................................................................... 35

7.7 Language Settings ................................................................................................................. 36

7.8 HOME key ............................................................................................................................. 36

8, Contact us ................................................................................................................................... 37

1. Manual Information

1.1 Copyright Notice

This user manual is copyrighted Shenzhen Guruiwate New Energy Co., hereinafter referred
to as "Guruiwate." All without the written permission of the Company, any unit or individual shall
not extract, copy some or all of the contents of this user manual, in any form, including
information and publications, dissemination, this copyright Guruiwate all, All Rights Reserved.
The manual version of S3.2, Guruiwate have the user manual for this final interpretation, if
ShineServer software page feature has been modified, with the latest information on the
Company shall prevail, without notice.

1.2 About the manual

Dear user, Thank you for using Guruiwate New Energy Co., Ltd., Shenzhen (hereinafter
referred to as Guruiwate) developed ShineServer, we sincerely hope that this product meets your
needs very much, and look forward to your product's performance and functionality make more
multiple views. The purpose of this manual is to provide detailed product information to the
reader.

1.3 for Readers

This manual is intended for ShineServer user access, operation and maintenance of
professional and technical personnel and daily operations. Readers need to have some
knowledge of the network, as well as to understand the company's products.

1.4 guide

When using ShineServer please read this manual carefully. Manual content and pictures
used, logos, symbols and so on for Guruiwate all. Non-insiders of the Company may not be
disclosed without the written authorization reproduced in whole or in part. If manual updates to
the new manual shall prevail.
2, ShineServer presentation

2.1 range

ShineServer apply to purchase the company's Shine WebBox, Wi-Fi Module and all other
users, by monitoring the data collector to the data upload for viewing on ShineServer, while
ShineServer data can also be saved on the sensor monitor, the user can use the Excel table in the
form of export data, save it to your local computer for viewing.

2.2 Features

Data logger can upload the data to the monitor to ShineServer user to access data. Users
only need to access ShineServer can know the status of the inverter, as well as current and
historical power generation data. The inverter can also view the day, month, year, total
generating capacity. ShineServer each inverter display of power generation in the form of a list,
but also to other photovoltaic devices can monitor and view the data, such as combiner boxes,
smart meters, environmental monitors, storage machines and more.

2.3 Conditions of Use

1, the computer must be networked.

2, there must be data collectors.
3, with a browser on your computer.
3. Use ShineServer

3.1 Language Settings

ShineServer available in English, Chinese, French, Japanese, Italian, New Zealand, Turkish
and Polish eight kinds of languages. In the upper left corner of any interface language switching
can see the icon, click the "Cn" icon page display in Chinese, click on the "En" page switches to
English.

Figure 3.10-1 language switching

3.2 Register

When you first log in ShineServer page must be registered to log in to ShineServer top.

3.2.1 Requirements

1. Make sure the inverter connected Shine WebBox, Shine WebBox connected to the Ethernet.
2, the computer must be connected to the Ethernet access.
3, must have a browser on your computer.
3.2.2 registration steps

1, open the browser on the computer, in the browser address bar enter "server.growatt.com",
press the "Enter" key to enter ShineServer login page shown in Figure 3.11-1.

Figure 3.11-1 page into English

2, click the "Register New User", enter the registration page, enter your registration information,
as shown below 3.12-1
 Figure 3.12-1 enter your registration information

3, click the "Register" button, the user registration is completed into the main interface.

3.3 Login, quit

3.3.1 Login

1, open the browser on your computer, in the browser address bar enter: "server.growatt.com"
press "Enter" key to enter "ShineServer login page"

2, in the "User Name" text box to enter a user name has been registered successfully, in the
"Password" text box, enter "Password" text box "checksum" after entering the correct checksum,
such as Figure 3.13-1
 Figure 3.13-1 enter your login information

3. Click on the "Login", after logging in successfully entered ShineServer main interface.

3.3.2 Exit

Log into the "Main", click on the top left of the "exit" button to exit the home page, go to
the next page landing page. To re-enter must enter the correct user name and password.

4, the user interface

When you log into, it will automatically pop up the screen, prompting you to create a power
plant and distribution system, click OK.
Under this interface, mainly a menu bar is displayed below the dashboard data, the menu bar
(shown below) is
Station name, instrument panel, power plants, User Center, settings, downloads, where the
rightmost two are also language switching back to the main interface buttons, when you want to
access the menu bar either interface, you'll be prompted window creation station, so the next
step we create power plant setting.

Figure 3.14-1 main interface

Figure 3.15-1 main interface

5, set up power plant

5.1 New Power Station

Users log on to the ShineServer, you need to create a power plant. Select "User Center -
Station Overview" page into the new power plants. Page most lower corner there is a new power
station button, click New Station. New power plant comprising: providing installation information,
set location, set the gain, setting station profile. All plant information filled out "Save" to
complete the new power plants.

Figure 3.16-1 Users interface

 Figure 3.17-1 click New Station

5.1.1 Installation Information

Installation information required for the new power plant users:

1, the plant name, the user can customize the input station name according to your preference.
2, the date of installation, creating power plant installation date.
3, set the power, set the total power plant.
4, design companies, service vendors set up power plants.

5.1.2 Set Geographic Information

Location, according to the needs of users to fill in, if you do not fill in the default time zone
to time zone server location, time of access to China's time,
1, country, fill in the user station is located.
2, City, fill in the user station's city.
3, time zone, power plants fill the user's time zone, so as to confirm local time, and not because
of power stations and the server is not the same country leads to time displayed on your system
is incorrect.
4, longitude latitude, longitude and latitude to fill in the location of the power station, you can
drag the arrows on the map automatically.
5, power profile, based on users to upload pictures show pictures power station plant
information.

5.1.3 Setting income formula

The setting is based on earnings in the market for power generation 1KWH conversion standard.
1, capital gains, setting 1KWH electricity unit price.
2, save coal, the value of the standard 1KWH savings of standard coal.
3, CO2 emissions, 1KWH generating capacity reduction of emissions CO2.
4, SO2 emissions, 1KWH generating capacity reduction of emissions SO2.

5.1.4 Station Map

There are two options for google.com and google.cn, were able to locate the satellite to
your location. Google.com is located within China, and is located in the world within
google.cn. .com place except in China with a Chinese with .cn.

Figure 3.18-1 Register Station

6, add the data logger

1. Plant created, you can add data acquisition, and data acquisition station addition is in the
menu bar, select "Plant - Device Manager - Data Collector" will appear interface shown in Figure
3.19-1. The above prompt "no collection, now add?." Click here to add collection.

Figure 3.19-1 collector interface

2. Click here, will pop up a window that prompts you to add a logger's serial number and
verification code, enter the Collector you want to add information and click Save, the collector
has been added to it, as 3.20-1 and 3.21-1 shown.
 Figure 3.20-1 Adding Acquisition

If you are adding a logger working situations, after added to it, the beginning will show off state,
to wait 2-3 minutes to appear connected state, because the data acquisition system to upload
data to the server the required time.

Figure 3.21-1 acquisition added after the success of the interface

2. After successfully added, you can view the monitored PV equipment: Inverter, environmental
monitoring, smart metering, and energy storage machine combiner box. The monitored inverter
and combiner box shown in Figure equipment. And you can double-click on the connected device,
you can pop up a window display of specific parameters of the device can also lead out.
Figure 3.22-1 monitored inverter
Figure 3.23-1 inverter History Sheet
Figure 3.24-1 monitoring of the environmental monitor

Figure 3.25-1 monitor to the combiner box

7, the user interface and the main menu bar
Intro

As shown in Figure After you successfully login interface 3.26-1 shown, is primarily a menu
bar and several deputy dashboard graphics, the menu bar can be divided into eight major
modules, namely the current station, the instrument panel, power plants, User Center, settings,
downloads, language settings button and Home button, introduced specific operating functions
of each module below.

7.1 Station selection

As shown in Figure 3.26-1, when you have more than one station, you can select the station
they want to know their needs, view the information.

Figure 3.26-1
7.2 Dashboard

As shown in Fig. 3.27-1 station can see all the relevant data, today's generation, the month
generating capacity, total generating capacity, revenue, saving the amount of standard coal,
carbon dioxide emission reductions, ambient temperature, sunlight intensity, wind speed, wind,
back panel temperature, and other information, intuitive and clear. If you want to set the
appropriate instrument in the "Settings - Dashboard Setting", check your desired instrument will
be displayed in the dashboard.

Figure 3.27-1

7.3 Plant

7.3.1 Job Information

Work information means you can view all photovoltaic devices are working at any one time
in power, the historical data for a certain period of a day, you can press DMY accumulated, and
also compared with each other between the same equipment. All information about the
parameters shown by the line graph below portrayal of photovoltaic devices can be intuitively
reflect the operation of the device. Wherein the data collection is optional, if there are multiple
data collection at work, you can choose what you want, the data collection will be a list on the
left the monitored data acquisition device selection list, check it The following is a line graph data
for the device.
Also the graph below, there are many parameters to choose from, pv power, pv1 voltage,
pv1 current, pv2 voltage, pv2 current, R-phase power, s-phase power, T-phase power and other
parameters, different parameters will be appropriate graphics and data.

Figure 3.28-1 inverter graph

As shown in Figure 3.19-1, the default display of the power plant has been selected the data,
the other can show different parameters depending on the device select power plants,
photovoltaic power plants on the map by default, if you want to choose more than one power
station look at the power station to be displayed. Select the station and then to choose a good
acquisition, put the mouse will automatically show the drop-down button next collector
collection list, select a logger click on it, on the left there will be monitored under the acquisition
of all photovoltaic devices, which You can select a photovoltaic device when the graph that you
want to see, and optionally one, but also an optional plurality, but at the same time can only
select the same device. Otherwise, only relatively small pop-up window to remind the same
device. The following parameters of different devices which display different curves
demonstrated pattern is different, as shown above, there is pv inverter power, pv1 voltage, pv1
current, pv2 voltage, pv2 current, R-phase power, s-phase power , T-phase power eight kinds of
parameters, check the different parameters, it will display the contents of the selected parameter,
while the curve will be different. The two right buttons are downloading graphs and print graphs.

7.3.2 Device Manager

The interface can add a new data acquisition, view the connection status of each device and
the corresponding data, and you can change the device name, set the functions of the device,
remove the equipment.
First, the data collector
1, add the data collector.
2, see the data collector information, connection status, IP and port number, the
address range, firmware version.
3, you can modify the name of the collector.
4, section collector can be set.
5, you can remove collector.

Figure 3.29-1 acquisition information

Two inverter
1, you can see all the inverter information collector under.
2, you can view the connection status of the inverter.
3, you can view the data information to the inverter, rated power, today's generation,
the month generating capacity, total generating capacity.
4, you can change the name of the inverter.
5, you can delete dropped the inverter.
6, you can set the inverter related functions.
7, double-click on the inverter information bar, you can view the inverter specific data.

Figure 3.30-1 inverter list

Figure 3.31-1 inverter function information setting

Figure 3.32-1 inverter specifications table

Third, the environmental monitor
1, you can view all environmental monitoring instruments under acquisition.
2, you can view the connection status of environmental monitors.
3, you can view the environmental monitor wind speed, wind direction, solar
temperature, ambient temperature, the back panel temperature, solar radiation, the
last login / update time.
4, can modify the environment monitor name.
5. Double-click the environmental monitor information bar, you can view specific
information.

Figure 3.33-1 environmental monitor information

Fourth, smart meters

1, you can see all the smart meter collector under.
2, you can view the connection status of smart meters.
3, you can view the smart meter active power, reactive power, apparent power, reactive
power, active power, power factor, and last logon / update time.
4, you can modify the name of smart meters.
 5. Double-click the smart meter information bar, you can view specific data.

Figure 3.34-1 smart meter information

Fifth, the combiner box

1, you can see all the bus at the collector box.
2, you can see the connection status combiner box.
3, you can see the position of the combiner box, large ones, bus voltage and final
registration / update time.
4, you can change the name of the combiner box.
5. Double-click the combiner box to view specific parameters combiner box.
 Figure 3.35-1 combiner box information

Sixth, the storage machine

1, you can see all storage machines under acquisition.
2, you can view the status of the energy storage unit is connected.
3, you can see the location of the storage unit, the amount of charge and discharge
capacity and final registration / update time.
4, you can change the name of the storage unit.
5. Double-click on the information bar to view the storage machine storage machine
specific parameters.
 Figure 3.36-1 information storage unit

7.3.3 Event Log

In this screen you can view all historic data in all equipment under abnormal operating
conditions of. If too much data can be filtered according to the device name lookup. As shown in
Figure 3.37-1.
 Figure 3.37-1 Event Log

7.3.4 System Status

This interface is very intuitive main display of the power storage unit, the storage unit
battery power, charge and discharge, and the standby state. If more than one storage unit can
also choose to view that you want. With an approximate figure shows the way our system, while
above, there are data available for users, as shown below.
 3.38-1 System Status

7.3.5 Station Details

The main interface displays all the information you current power plant, in fact, when you
sign up for this power plant information.
As shown in Figure 3.39-1.

3.39-1 station details Figure

7.4 Users

7.4.1 Station Overview

In this screen can display the total power of all power plants, through a very intuitive graph
describes every moment of power or function, and provides a graphical four ways, the same day
generation, generation of the month, when the power generation and cumulative power. Two
buttons on the right are the download graph line and print graphics. This interface can be divided
into two blocks, the first chunk of the graphics to display the total of all plant workers, can be
calculated in four ways, DMY accumulated, as 3.40-1

Figure 3.40-1 Station overview graph

This chart shows data for all plant under the user and

The second chunk is the station list, all the power plants will be in the following display,
power station information, station names, total generating capacity can see, you can modify the
station name, and you can delete the station. One very important feature is the new power
plants, all of our power plants are new in this page. As shown
 Figure 3.41-1 Plant Overview Plant List

7.4.2 User Information

First,personal information changes

As the name suggests is to make changes to your account, click Save after modifying it.

Figure 3.42-1 personal information changes

Second, change your password

You can modify your account password, entered click Save on it.
 Figure 3.43-1 password changes

Third, browse user

Here you can add browse account, you can select the appropriate station as required,
the provisions browse account can see power plants, other power plants can not view,
browse account only data browsing, no rights to the data CRUD, click below Add button
to add the browser accounts, input information, save a success.
 Figure 3.44-1 Register Browse account

7.5 Setting

7.5.1 Dashboard settings

As shown in FIG is set on the dashboard, there are 12 kinds of dashboard options, today
generating capacity, the month generating capacity, total generating capacity, revenue, saving the
amount of standard coal, carbon dioxide emission reductions, ambient temperature, sunlight
intensity, wind speed, wind direction, temperature back panel. You can select the dashboard you
want according to your preferences. After you save the menu bar dashboard displays all the
instruments of your choice.
 Figure 3.45-1 dashboard

7.5.2 mailbox settings

This function is associated with the mailbox on your station set up, you can modify the
mailbox, there are three options which can be checked, receive alerts, receiving daily reports,
monthly reports received, it will be checked in the case of a warning mail day will regularly send
you a daily report, monthly periodically send you monthly statements. You can add a new
mailbox, but can also delete mailboxes.

Figure 3.46-1 mail settings

7.6 download

7.6.1 File Download

In this screen you can download the user manual, ShineServer user manual in English,
Growatt Wi-Fi Module in the English version, ShineWifi user manual in English.

Figure 3.49-1 Download User Manual

7.6.2 Download

In this interface users can download software, ShineWifi Andrews version and IOS version,
ShinePhone Andrews version and IOS version.
 Figure 3.50-1 APP Download

7.7 Language Settings

As shown in Figure 3.51 on page text language can be set, available in English, Chinese,
French, Japanese, Italian, New Zealand, Turkish and Polish is available in eight languages settings.
Users can set up according to their needs.

Figure 3.51 Language Settings

7.8 HOME key

When you are in any one interface, click the HOME key, you will return to the dashboard of
the interface.
 Figure 3.52-1 HOME key

8, Contact us

Guruiwate new energy to provide customers with comprehensive technical support. Users may
contact the nearest Guruiwate new energy office or service center can also contact the company
headquarters.

Name: Shenzhen Guruiwate New Energy Co., Ltd.

Address: Shenzhen Bao'an District street Dragon community Guangming Road on the 28th
Customer Service Hotline: +86 75527471942

E-mail: [email protected]

Company Website: www.growatt.com