Scribd
Upload
46 views3 pages

00 0 Maxwell Front Cover Color

FInally

Uploaded by

Nathan Gazon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views3 pages

00 0 Maxwell Front Cover Color

FInally

Uploaded by

Nathan Gazon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Maxwell 2D

Electromagnetic and Electromechanical Analysis

electronic design automation software

user’s guide – Maxwell 2D

ANSYS Inc  Southpointe  275 Technology Drive  Canonsburg, PA 15317


The information contained in this document is subject to change without notice.
ANSYS Inc. makes no warranty of any kind with regard to this material, including, but
not limited to, the implied warranties of merchantability and fitness for a particular
purpose. ANSYS Inc. shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this
material.

© 2010 ANSYS Inc. All rights reserved.

ANSYS Inc.
Southpointe
275 Technology Drive
Canonsburg, PA 15317
[email protected]
http://www.ansys.com
(T) 724-746-3304 (F) 724-514-9494

Ansoft Maxwell, Simplorer, RMxprt and Optimetrics and any and all ANSYS, Inc.
brand, product, service and feature names, logos and slogans are registered
trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or
other countries. All other brand, product, service and feature names or trademarks are
the property of their respective owners.

New editions of this manual will incorporate all material updated since the previous
edition. The manual printing date, which indicates the manual’s current edition,
changes when a new edition is printed. Minor corrections and updates which are
incorporated at reprint do not cause the date to change. Update packages may be
issued between editions and contain additional and/or replacement pages to be
merged into the manual by the user. Note that pages which are rearranged due to
changes on a previous page are not considered to be revised.

Edition: REV6.0
Date: 13 March 2012
Software Version: 15
Maxwell 2D User’s Guide

Contents
This document discusses some basic concepts and terminology used throughout
the ANSYS Maxwell application. It provides an overview of the following topics:
Overview
1.0 - Maxwell 2D
Examples – Eddy Current
6.1 – Jumping Rings Axisymmetric Model
6.3 – Instantaneous Forces on Busbars
Examples – Transient
7.1 – Gapped Inductor Model
7.2 - Solenoid Problem with an External Circuit
7.4 – Core Loss
Examples – Basic Exercises
9.1 – Electrostatic
9.2 – DC Conduction
9.3 – Magnetostatic
9.4 – Parametric
9.5 – Transient
9.6 – Transient with Circuit Editor
9.7 – Post-processing
9.8 – Optimetrics
9.10 – Scripting
9.12 – Eddy Current
9.13 – Rotational Transient Motion
9.14 – Boundary Conditions
9.15 – Permanent Magnets Assignment
Examples – Motors
11.1 - ANSYS Electrical Machine Design Reference
11.2 - Permanent Magnet Synchronous Machine
11.3 - Three-Phase Induction Machine
11.4 - Permanent Magnet Motor (Prius IPM)
11.5 - OptimetricsAnalysis with RMxprt
11.6 – Torque Optimization using Design Explorer

You might also like