MCX7000

MULTI-CARRIER SATELLITE GATEWAY

(R2.3)

Description Clean Channel Technology®, in

combination with DVB-S2X, improves The Newtec MCX7000
Building upon the MDM6100 Broadcast Satellite Modem software suite, satellite efficiency by up to 15%, thereby is a new dense DVB-
the enhanced hardware platform of the MCX7000 extends the modem enabling much smaller carrier spacing. S2X multi-carrier
capabilities beyond single carrier support and this in full compliance
satellite gateway,
with all satellite DVB standards up to DVB-S2X. In a multi-modulator Maximum symbol rates up to
configuration, four 133 Mbaud carriers can be generated. In a multi- 133 Mbaud and modulations up resulting in OPEX and
demod configuration, three 133 Mbaud carriers can be demodulated. As a to 256APSK (DVB-S2X standard) CAPEX savings. Its
modem, two carrier demodulation can be combined with the modulation combined with VCM (Variable Coding field of use covers all
of a 133 Mbaud carrier. Each and every transport stream embedded in and Modulation) allow for maximum
one of the received carriers can be output on one of the six (optional) ASI
Broadcast applications,
throughput in large contribution links.
or dual Ethernet ports. The same data interfaces can be used as input ports from DTH and primary
for the modulator. Transmodulation of a received stream is also an option. Up to 8 transport streams are supported distribution to towers
in both directions over the redundant and head-ends to
Its remote in-band management and software upgradeability makes it the GbE ports. On top of this, another 6
receiver equipment of choice for remote unattended towers and headends. transport streams can be routed in
contribution and
Subsequent releases of this future-proof DVB-S2X platform guarantee, by either direction over the optional 6 ASI exchange networks.
simple software upgrade, even increased functionality and higher density. ports. The streams received from up to 3 Its 133 Mbaud
satellite carriers can be sent to any of the
capability extends its
Delivering the highest uptime for vital links ASI or GbE ports.
use to HTS spot-beam
Uptime and reliability are essential in the design of the multi-carrier The MCX7000 Multi-Carrier Satellite transponders.
gateway, taking a vital role in the satellite network. Input source Gateway can be easily monitored and
redundancy and the shortest redundancy switch-over times, operating controlled via a comprehensive front panel menu, advanced web GUI as
both in 1+1 and N+1 topologies, are setting the standard in our industry. well as via SNMP protocol. This enables easy integration into any industry-
standard EMS/NMS system. Its bidirectional remote in-band management
Advanced capabilities are built in such as a MPEG Transport Stream and software upgradeability makes it the receiver equipment of choice
analyser, support of SMPTE 2022 FEC at the GbE inputs (for distributed for remote unattended towers and headends.
IP headends), and native support of Carrier ID according to the DVB
standard as well as in the transport stream NIT Table. Re-ordering and gap Evolve towards tomorrow’s technology
filling of missing packets in transport streams is done with the Seamless
input stream switching option. Special care was taken to cope with jittery Built upon flexible and latest generation programmable technology, the
transport stream over IP inputs. The 6 ASI ports are programmable as MCX7000 Multi-Carrier Satellite Gateway is a future-proof building block
inputs or outputs allowing for monitoring as well as operational ASI ports. that lets any satellite network evolve to the next level of capabilities. A
To protect the satellite transmission, the AES option can be activated. scalable, pay-as-you-grow, licensing and software upgrade mechanism
AES allows to encrypt/decrypt with a high security level the content facilitates the launch of new services, or last minute network design
of all DVB-S2(X) streams. On Transport Stream level, BISS scrambling/ changes, without rebuilding the entire network infrastructure. Migration
descrambling is optional. from ASI to GbE and IF to L-band is facilitated by simple in-field installation
of license keys.
Migration of standard distribution links towards the new DVB-S2X
Get the best performance and lower your costs
standard can be as simple as inserting an MCX7000 Multi-Carrier Satellite
Gateway in the headends while keeping the installed base of IRDs.
The MCX7000 Multi-Carrier Satellite Gateway performs among the best, Efficient transmission of UHDTV bouquets over 2 or 3 transponders for
offering unmatched bandwidth efficiency optimization options, thereby DTH only requires the Channel Bonding license.
lowering overall Total Cost of Ownership. The fully automated operation
of Newtec´s field-proven Equalink® 3 predistortion technology is Featured modulator technologies such as Equalink 3 linear and non-
now available for any satellite transmission application providing up linear predistortion and Clean Channel Technology bring best-in-class
to 15% bandwidth gain in DVB-S2(X) 8PSK mode in single carrier per output spectrum, enhancing the satellite link margin and throughput to
transponder constellations. its optimum. The non-linear post compensation in the receivers brings
extra link margin when in uplink limited multi-carrier per transponder
constellation.

Rev.1 02/2018 www.newtec.eu

SPECIFICATIONS
Key Features
- DVB-S2X, DVB-S2, DVB-DSNG and DVB-S compliant
• Configurations: - QPSK, 8PSK, 16APSK, 32APSK, 64APSK, 128APSK
- 4 x DVB-S2X carrier modulator and 256 APSK
- 3 x DVB-S2X carrier modulator with optional ASI interfaces - Clean Channel Technology provides up to 15% bandwidth
- Modem with one or two modulators with optional ASI interfaces efficiency gains on top of the DVB-S2 standard
- 3 x DVB-S2X carrier demodulator - Optional 2% roll-off on modulator side for highest efficiency
- Modem with one or two demodulators with optional ASI interfaces - Optional Equalink 3 pre-distortion provides up to 15% bandwidth
• Minimum symbol rate: 256 kbaud gain in DVB-S2(X) 8PSK mode,
• Maximum symbol rate: 133 Mbaud higher QoS and geographic coverage
• Data rates up to 425 Mbit/s - Multistream CCM or VCM mode with ISSY
• IF (70/140) and L-Band (950 - 2150) high power outputs - Selection of DSNG profiles acc. WBU-ISOG including the new DVB-
• Demodulators with dual L-band input S2X standard
• Highest system reliability and service uptime through robust design and - Secure front panel, SNMP, HTTP and CLI interfaces
industry leading redundancy solutions • Future-proof design combining video and IP multiservice capabilities,
- Exceptional jitter recovery on TS over IP inputs with SMPTE 2022 FEC supports transport of today´s and tomorrow´s services
- Redundant optional ASI or GbE interfaces in single stream mode - Multistream reception and transmission (8 streams in both
- Redundancy with main TS over ASI and back-up TS over IP input directions for modem configurations – 16 streams in modulator or
- Redundant optional ASI interfaces for up to 3 TS input streams demodulator only configurations)
- Stream and Source redundancy on TS over IP inputs - Up to 8 Transport Streams mux/demux on GbE (TSoverIP) and 6 on
- Optional Seamless Protection Switching acc. SMPTE 2022-7 optional ASI interfaces
on TS over IP inputs - Transport Stream over IP outputs optimized for minimal Packet
- User configurable alarm table for device & carrier redundancy switching Inter-Arrival-Time
- TS null packet stuffing detector • 4 x built-in encapsulators for opportunistic data insertion up to 70 Mbps,
- Carrier-based redundancy switching in a multiple modulator interoperable with IRDs that support Multi Protocol Encapsulation (MPE)
1+1 configuration • 4 x MPE decapsulators up to 70 Mbps
- Built-in TS Analyser with PCR jitter measurements • Supports SFN Networks using transparent TS pass-through
- Accurate link margin monitoring through the use of the • Optional AES encryption/decryption per ISI stream and per carrier
Noise & Distortion Estimator (NoDE) tool • Optional BISS scrambler and descrambler
- RFI reduction using DVB RF Carrier ID (DVB-CID) and NIT table CID • Optional Channel Bonding modulator acc. DVB-S2X up to 425 Mbps
- Automatic TS rate adaptation • Demodulator supports the Equalink 3 calibration protocol
- ASI and TS over IP monitoring outputs of input TS streams • External reference input
- L-band monitoring output • Optional 10 MHz reference output
- Market leading RF purity and performance • Easy integration with industry leading management systems (EMS/NMS/
- Programmable amplitude slope equalizer OSS)
- 8 x PRBS generators and 3 x PRBS detectors for link performance tests • Feature-based pricing and software upgrades
- Optional high stability internal clock reference • Pay-as-you-grow flexible licensing scheme
- Optional dual AC power supply • Remote in-band management
• Low Total Cost of Ownership as a result of very high bandwidth efficiency • Remote over-the-air software upgrade
technology options, and ease of monitoring and control

Use Cases and Applications In closed video distribution networks, AES encryption of the
baseband frames results in extra security on physical layer level.
Multi-modulator equipment for OPEX and CAPEX reduction in
Optional part within a Newtec Dialog® multiservice broadcast
back-up or dense DTH HUB stations.
solution.
The support of DVB-S2X and its upgradeability to the transmission
of bonded carriers makes the MCX7000 the preferred solution
for transmission of future UHDTV bundles. Related Products

Efficient distribution to towers and headends resulting M6100 Broadcast Satellite Modulator
in OPEX and CAPEX savings is a major application for the MDM6100 Broadcast Satellite Modem
MCX7000. It brings higher efficiency, limited need for rack space FRC07x0 Frequency converters portfolio
and with its transmodulation capability allows for upgrade of
USS0212 1+1 Modulator Redundancy Switch
existing stations to the DVB-S2X standard while preserving the
USS0201 Universal Switching System
installed base of IRDs. This allows for decoupling modulation
and video encoding technology roadmaps and investments.
Related Bandwidth Efficiency Technologies
Another use case is the reception of multiple contribution
links in a single HUB device, bringing down CAPEX.
Clean Channel Technology
Broadcast contribution modem on standard and HTS spot- Equalink 3
beam transponders. DVB-S2X (incl. Channel Bonding for TS transmission)
 MCX7000
MULTI-CARRIER SATELLITE GATEWAY (R2.3)

Figure: Dual modulator modem with ASI and GbE interfaces and dual power supply

Data Interfaces 8PSK:

16QAM
2/3, 5/6, 8/9
3/4, 7/8
• Frequency
• Level
50 - 180 MHz (10 Hz steps)
-35/+10 dBm (± 2 dB)
ASI INTERFACE (OPTIONAL) • DVB-S2 (acc. ETSI EN 302 307 v1.2.1 for DVB-S2) • Return loss 50 Ohm: > 14 dB
Single stream mode Outer/Inner FEC: BCH/LDPC 75 Ohm: > 20 dB
• 2 selectable ASI inputs on BNC (F) – 75 Ohm 52 MODCODs (short & normal frames): • Spurious performance
(coax) QPSK: from 1/4 to 9/10 Better than - 65 dBc/4 kHz @ +5 dBm output
• 2 x ASI output on BNC (F) – 75 Ohm (coax) 8PSK: from 3/5 to 9/10 level and > 256 kbaud
• 188 or 204 byte mode 16APSK: from 2/3 to 9/10 Non-signal related:< - 80 dBc @ +5 dBm output
• Rate adapter 32APSK: from 3/4 to 9/10 L-BAND MONITORING (QTY: 0-4)
• MPTS or SPTS according to ISO/IEC 13818 • DVB-S2X standard • Connector SMA (F), 50 Ohm
Multistream mode Outer/Inner FEC: BCH/LDPC • Frequency Same as L-Band output
• 6 BNC(F) - 75 Ohm (coax) connectors 53 MODCODs (normal frames): frequency or 1050 MHz in
individually configurable as input or output or as QPSK: from 1/4 to 9/10 case of IF output option only
3 redundant TS inputs with auto switching 8PSK: from 3/5 to 9/10 • Level -45 dBm
• 188 or 204 byte mode 16APSK: from 26/45 to 9/10 • Return loss > 10 dB
• Rate adapter 32APSK: from 32/45 to 9/10 10 MHZ REFERENCE INPUT
• MPTS or SPTS according to ISO/IEC 13818 64APSK: from 11/15 to 5/6 • Connector BNC (F), 50 Ohm
ETH INTERFACE 128APSK: 3/4; 7/9 • Input level -3 dBm up to + 7 dBm
• Auto switching 10/100/1000 Base-T Ethernet 256APSK: 32/45; 3/4 • Frequencies 1, 2, 5, 10, 20 MHz
interface 13 Linear MODCODs (normal frames): 10 MHZ REFERENCE OUTPUT (OPTIONAL)
• Transport stream over IP interface (UDP/RTP), 8APSK-L: 5/9; 26/45 • Connector BNC (F), 50 Ohm
unicast or multicast 16APSK-L: from 1/2 to 2/3 • Output level +3 dBm (+/- 2 dB)
• Seamless Protection Switching SMPTE 2022-7 on 32APSK-L: 2/3
TSoIP inputs (optional) in the 64APSK-L: 32/45 Demodulation Interfaces
300 kbps - 90 Mbps bit rate range 256APSK-L: 29/45 to 11/15
• Forward Error Correction SMPTE 2022-1 and -2 41 MODCODs (short frames): DUAL L-BAND INPUT (QTY: 0-3)
• 188 or 204 byte mode QPSK: from 11/45 to 8/9 • Connector 2 x F-type (F), 75 Ohm
• Rate adapter 8PSK: from 7/15 to 8/9 • Return loss > 7 dB (75 Ohm – F(F))
• MPTS or SPTS according to ISO/IEC 13818 16APSK: from 7/15 to 8/9 • Maximum total input power: - 10 dBm
32APSK: from 2/3 to 8/9 • Maximum input signal power: (-30 + 10log(f))
Content Encryption • Support of DVB-S2 VCM mode
(on modulator and demodulators)
dBm where f=baud rate in Mbaud
and Protection SYMBOL RATE RANGE
• Minimum input signal power: (-80+Es/
No(thr)+10log(f))dBm where f=baud rate in
Modulator Mbaud and Es/No(thr)= Es/No value in dB for
BISS SCRAMBLER (OPTIONAL) • DVB-S2, DVB-S2X 256 kbaud - 133 Mbaud QEF reception
• Support for BISS-0, BISS-1 and BISS-E • DVB-S & DSNG 1 - 45 Mbaud • Frequency 950 - 2150 MHz
• On 4 TS (SPTS or MPTS) in modulator Demodulator • Adjacent signal < (Co+7) dBm/Hz with
configurations • DVB-S2, DVB-S2X 256 kbaud - 133 Mbaud Co = signal level density
• On 2 TS (SPTS or MPTS) in modem • DVB-S & DVB-DSNG 1 - 45 Mbaud LNB POWER AND CONTROL
configurations FRAME LENGTH (ON 1 L-BAND INPUT/DEMOD)
• Up to 50 Mbps per TS • DVB-S & DVB-DSNG 188 bytes • Max. current 350 mA
• Up to 130 Mbps on one TS per MCX7000 • DVB-S2 & DVB-S2X • Voltage
BISS DESCAMBLER (OPTIONAL) Short Frames 16200 bits 11,5 -14 V (Vertical polarization)
• Support for BISS-0, BISS-1 and BISS-E • DVB-S2, DVB-S2X 16 -19 V (Horizontal polarization) & additional
• On 3 TS (SPTS or MPTS) in demodulator Normal Frames 64800 bits 22 kHz +/- 4 kHz (band selection according
configurations CLEAN CHANNEL TECHNOLOGY to universal LNB for Astra satellites & DiSEqC
• On 2 TS (SPTS or MPTS) in modem • Roll-off option (on modulator): 2% command transmission)
configurations • Roll-off: 5% -10% -15% -20% - 25% - 35%
• Up to 130 Mbps • Optimum carrier spacing Internal 10 MHz Reference
AES ENCRYPTION (OPTIONAL)
• AES encryption of Baseband frames
• Advanced filter technology
EQUALINK 3 Frequency
• 64-bit or 128-bit mode • Linear and non-linear predistortion for all
MODCODs STANDARD STABILITY
• One AES encryption per carrier • Stability: +/- 2000 ppb over 0 to 70° C
• Single key or one key per ISI stream • Maximum rate 72 Mbaud
CARRIER INTERFERENCE REDUCTION • Ageing: +/- 1000 ppb/year
• Up to 1 x 140 Mbps or 4 x 32 Mbps or VERY HIGH STABILITY (OPTIONAL)
6 x 23 Mbps/ carrier • DVB RF Carrier ID (DVB-CID)
• Spread Spectrum Modulator (BPSK) • Stability: +/- 2 ppb over 0 to 65°C
AES DECRYPTION (OPTIONAL) • Ageing: +/- 500 ppb/10year
• Supports User Data
• AES decryption of Baseband frames
• 64-bit or 128-bit mode
• Compliant to ETSI 103 129 v1.1.1 (2013-05)
• Carrier ID NIT Table Generic
• One AES decryptor per carrier
• Global key or one key per ISI stream CHANNEL BONDING
MONITOR AND CONTROL INTERFACES
• Up to 1 x 140 Mbps or 4 x 32 Mbps Modulator
• Web server GUI (HTTP) via web browser
or 6 x 23 Mbps/ carrier • For TS transmission
• M&C connectivity via separate Ethernet links
• According to DVB-S2X standard
• Diagnostics report, alarm log (HTTP)
IP Encapsulation • Up to 3 bonded 72 Mbaud carriers
• Maximum rate 450 Mbps (over UDP);
• SNMP v2c
ALARM INTERFACE
• Optional 4 MPE Encapsulators 425 Mbps (with RTP-FEC)
• Electrical dual contact closure alarm contacts
• Max aggregate 70 Mbit/s • L-band output
• Connector 9-pin sub-D (F)

IP Decapsulation Modulation Interfaces • Logical interface and general device alarm

L-BAND (CONFIGURATION OPTION) (QTY: 0-4)

Physical
• 4 MPE Decapsulators
• Max aggregate 70 Mbit/s • Connector SMA(F), 50 Ohm
• Height 1RU, width: 19”, depth 51 cm, 5.8 kg
• Frequency 950 - 2150 MHz (10 Hz steps)
• Power supply:
Modulation and Demodulation • Level
• Return loss
-35/+7 dBm (+/- 2dB)
> 14 dB
90-130 & 180-260 Vac,
260 VA, 47 - 63 Hz
• Switchable 10 MHz Reference
SUPPORTED MODULATION SCHEMES AND FEC • Temperature:
• Spurious performance
• DVB-S Operational: 0°C to +50°C / +32°F to +122°F
Better than - 65 dBc/4 kHz @ +5 dBm output
Outer/Inner FEC: Reed Solomon / Viterbi Storage: -40° to +70°C / -40°F to +158°F
level and > 256 kbaud
MODCODs: • Humidity: 5% to 85% non-condensing
Non-signal related: < - 80 dBc @ +5 dBm output
QPSK: 1/2, 2/3, 3/4, 5/6, 7/8 • CE label and UL
IF-BAND (CONFIGURATION OPTION) (QTY: 0-4)
• DVB-DSNG
• Connector BNC (F) - 75 Ohm
Outer/Inner FEC: Reed Solomon / Viterbi
MODCODs:
(intermateable with 50 Ohm) www.newtec.eu
ORDERING INFO MCX7000
MULTI-CARRIER SATELLITE GATEWAY (R2.3)

Newtec MCX7000 Multi-Carrier Satellite Gateway (R2.3) Ordering n° Newtec MCX7000 Multi-Carrier Satellite Gateway (R2.3) Ordering n°
Configuration Options Configuration Options
Category MCX7000
Category
Select 1 option Select 1 option
Hardware Platform Chassis Type 05 (7000) CH-05 Internal Reference Standard 10 MHz IR-00
Select 1 option Clock Very High Stability 10 MHz IR-02
Operating Software MCX7000 Major Software R2* MS-20 Additional Options
Select 1 option Category
Mains Power PSU Single AC 110/240 V PS-00 Max. 1 option per category
Supply Unit PSU Dual Redundant AC 110/240 V PS-01 Reference Clock
10 MHz Reference Output (BNC) RO-01
Output
Select 1 option
Video TS, Carrier-ID(NIT), TS Analyser* VP-01 Max. 1 option per category
Data/Video
Package Video TS, Demod only* VP-02 Equalink 3 * (1 license) AE-01
Select 1 option Equalink 3 * (2 licenses) AE-02
Pre-distortion
GbE TSoIP, SMPTE-2022 DEC (req. VP-01/VP-02)* VI-01 Equalink 3 * (3 licenses) AE-03
Video Interface GbE TSoIP + ASI(6) (req. VP-01/VP-02 and HS-05) VI-02 Equalink 3 * (4 licenses) AE-04
ASI (6 connectors) (req. VP-01/VP-02 and HS-05) AS-02 Max. 1 option per category
Select max. 1 option Roll-off factor 2% roll-off (modulator) CC-02
Modulator Cl.2 HS-01 Max. 1 option per category
Slot 1
Demodulator Cl.3 HS-02
MPE Insertion 4 x MPE Data insertion in TS (req. VP-01)* VM-01
Select max. 1 option
Max. 1 option per category
Modulator Cl.2 HS-03
Slot 2 Scrambling BISS (0-1-E) (Req. VP-01)* CA-01
Demodulator Cl.3 HS-04
Select max. 1 option Max. 1 option per category
ASI board HS-05 BISS (0-1-E) descrambler
Slot 3 Modulator Cl.2 HS-06 Descrambling AC-01
(Req. VP-01/02)*
Demodulator Cl.3 HS-07
Select max. 1 option Max. 1 option per category
No modulator license ML-00 AES 64 bit encryption* ES-01
One modulator license ML-01 AES 128 bit encryption* ES-02
Modulator licenses Two modulator license ML-02
2 x AES 64 bit encryption* ES-03
Three modulator license ML-03
Four modulator license ML-04 2 x AES 128 bit encryption* ES-04
Encryption
Select max. 1 option 3 x AES 64 bit encryption* ES-05
No demodulator board license DL-00 3 x AES 128 bit encryption* ES-06
Demodulator One demodulator board license DL-01
board licenses Two demodulator board licenses DL-02
4 x AES 64 bit encryption* ES-07
Three demodulator board licenses DL-03 4 x AES 128 bit encryption* ES-08
For a modem or modulator, select 1 option Max. 1 option per category
L-band with switchable 10 MHz output* OU-00 AES 64 bit decryption* AD-01
Modulator Output
IF (50 - 180 MHz)* OU-01
Interface AES 128 bit decryption* AD-02
IF+ L-band with switchable 10 MHz out* OU-02
For a modem or modulator, select 1 option 2 x AES 64 bit decryption* AD-03
Decryption
DVB-S Q/8PSK* SC-x1 2 x AES 128 bit decryption* AD-04
Modulator Standard
and Coding DVB-S/S2 QPSK* SC-x2
3 x AES 64 bit decryption* AD-05
(includes DVB-S/S2/S2X Q/8PSK* SC-x3
multistream support) DVB-S/S2/S2X Q/8PSK 16QAM 16APSK* SC-x4 3 x AES 128 bit decryption* AD-06
x = 0 to 3 (for 1 to 4 DVB-S/S2/S2X Q/8PSK 16QAM 16/32APSK* SC-x5 Max. 1 option per category
modulators)
DVB-S/S2/S2X Q/8PSK 16QAM 16/32/64/128/256* SC-x6 Redundancy
For a modem or modulator, select 1 option Seamless reconstruction (SMPTE 2022-7) SM-01
switching
Modulation Symbol Rate 5 Mbaud* SR-x1
Modulator Max. 1 option per category
Maximum Modulation Symbol Rate 15 Mbaud* SR-x2
Symbol Rates Modulation Symbol Rate 36 Mbaud* SR-x3 Channel Bonding Channel Bonding (modulator side) BO-01
x = 0 to 3 Modulation Symbol Rate 54 Mbaud* SR-x4 Max. 1 option per category
(for 1 to 4 Modulation Symbol Rate 72 Mbaud* SR-x5
modulators) Support Care Pack 3- and 5-year options GA-XX
Modulation Symbol Rate 133 Mbaud* SR-x6
For a modem or demodulator, select 1 option (*) Selectable via license key

Demodulator Contact your sales representative for details

DVB-S/S2/S2X Q/8PSK 16QAM 16/32APSK* DC-01
Standard and ([email protected]).
Coding (includes
multistream DVB-S/S2/S2X up to 256PSK* DC-02
support)

Demodulator
For a modem or demodulator, select 1 option
Demodulation Symbol Rate 72 Mbaud* DR-01
Support Services for your
Maximum
Symbol Rates Demodulation Symbol Rate 133 Mbaud* DR-02
Professional Equipment
Care Pack Basic and Care Pack Enhanced
are the Newtec service and support
packages protecting your Newtec
equipment over a three-year period.

This brochure is provided for information purposes only.

The details contained in this document, including product and feature specifications, are subject to change without notice and shall not bind Newtec in any way.

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

Europe North America South America Asia-Pacific China MENA

Tel: +32 3 780 65 00 Tel: +1 203 323-0042 Tel: +55 11 2092 6220 Tel: +65 6777 22 08 Tel: +86 10-823 18 730 Tel: +971 4 443 60 58
Fax: +32 3 780 65 49 Fax: +1 203 323-8406 Fax: +55 11 2093 3756 Fax: +65 6777 08 87 Fax: +86 10-823 18 731 Fax: +971 4 368 67 68