Scribd
Upload
109 views2 pages

65W Single Output Switching Power Supply: Series

This document provides specifications for a 65W single output switching power supply series called PS-65. It lists features such as universal AC input, protections against short circuits and overloads, and a 2-year warranty. The specifications include output voltages and currents, efficiency ratings, input/output ratings, protections, safety standards, dimensions, and other details for each model in the series.

Uploaded by

Jojo Kaway
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
109 views2 pages

65W Single Output Switching Power Supply: Series

This document provides specifications for a 65W single output switching power supply series called PS-65. It lists features such as universal AC input, protections against short circuits and overloads, and a 2-year warranty. The specifications include output voltages and currents, efficiency ratings, input/output ratings, protections, safety standards, dimensions, and other details for each model in the series.

Uploaded by

Jojo Kaway
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

65W Single Output Switching Power Supply PS-65 series

Features :
Universal AC input/Full range
Low leakage current<0.5mA
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 65KHz
2 years warranty

SPECIFICATION
MODEL PS-65-3.3 PS-65-5 PS-65-7.5 PS-65-12 PS-65-13.5 PS-65-15 PS-65-24 PS-65-27 PS-65-48
DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V
RATED CURRENT 12A 12A 8A 5.2A 4.7A 4.2A 2.7A 2.4A 1.35A
CURRENT RANGE 0 ~ 15.2A 0 ~ 13.8A 0 ~ 9.6A 0 ~ 6A 0 ~ 5.4A 0 ~ 4.8A 0 ~ 3A 0 ~ 2.7A 0 ~ 1.5A
RATED POWER 39.6W 60W 60W 62.4W 63.45W 63W 64.8W 64.8W 64.8W
OUTPUT POWER (max.) Rated output power for convection; 72W (+3.3V : 50W;+5V:69W) with 18 CFM min. Forced air
RIPPLE & NOISE (max.) Note.2 80mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p
OUTPUT
VOLTAGE ADJ. RANGE 3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.25 ~ 16.5V 22.8 ~ 26.4V 25.65 ~ 29.7V 45.6 ~ 52.8V
VOLTAGE TOLERANCE Note.3 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0%
LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0%
LOAD REGULATION 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0%
SETUP, RISE TIME 800ms, 20ms at full load
HOLD UP TIME (Typ.) 60ms at full load
VOLTAGE RANGE 90 ~ 264VAC 127 ~370VDC
FREQUENCY RANGE 47 ~ 440Hz
EFFICIENCY(Typ.) 69% 76% 79% 79% 79% 79% 80% 80% 80%
INPUT
AC CURRENT (Typ.) 1.2A/115VAC 0.72A/230VAC
INRUSH CURRENT (Typ.) COLD START 20A/115VAC 40A/230VAC
LEAKAGE CURRENT <0.75mA / 240VAC
73 ~ 105W(3.3V : 51 ~ 75W)(5V : 70 ~ 105W) rated output power
OVERLOAD
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
PROTECTION
3.8 ~ 4.46V 5.75 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 31 ~ 36.45V 55.2 ~ 64.8V
OVER VOLTAGE
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
WORKING TEMP. -10 ~ +60 (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT 0.04%/ (0 ~ 50
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved
SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
(Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
MTBF 300.7K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION 127*76*42mm (L*W*H)
PACKING 0.21Kg; 54pcs/14.2Kg/1.35CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
NOTE
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
5. Mounting holes M1 and M2 should be grounded for EMI purposes.
6. Heat Sink HS1,HS2 can not be shorted.

File Name:PS-65-SPEC 2011-08-18


65W Single Output Switching Power Supply PS-65 series

Mechanical Specification Unit:mm


127
115.8 5.6
5.6

FG
M1 HS1 M2

CN1
1
CN2
64.8

2 1
76

2
3
FS1 4
AC FUSE 5
F4A/250V HS2 6

4-
3.
8
42

AC Input Connector (CN1) : Molex 5277-02 or equivalent DC Output Connector (CN2) : Molex 5273-06 or equivalent
Pin No. Assignment Mating Housing Terminal Pin No. Assignment Mating Housing Terminal
1 AC/N Molex 5195 Molex 5194 1,2,3 +V Molex 5195 Molex 5194
2 AC/L or equivalent or equivalent 4,5,6 -V or equivalent or equivalent

HS1,HS2 can not be shorted


Block Diagram
fosc : 65KHz

RECTIFIERS POWER RECTIFIERS +V


EMI
I/P & SWITCHING &
FILTER -V
FILTER FILTER

FG DETECTION
CIRCUIT
PWM
O.L.P.
CONTROL
O.V.P.

Derating Curve Output Derating VS Input Voltage

100
100 OTHERS
90
80 85
80

60 3.3V,5V 70
LOAD (%)

LOAD (%)

60
40
50
20
40

-10 0 10 20 30 40 50 60 (HORIZONTAL) 90 95 100 115 120 140 160 180 200 220 240 264

AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz

File Name:PS-65-SPEC 2011-08-18

You might also like