The document is a CNC program for roughing a part called ROUGHING_BULL_DI_16_TR_0.8_1 using a 16mm diameter bullnose tool with a 0.8mm radius tip. It defines parameters for plunge, cutting and skim feed rates then describes the toolpath which makes multiple passes to rough the material.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
210 views
Tap CNC Program
The document is a CNC program for roughing a part called ROUGHING_BULL_DI_16_TR_0.8_1 using a 16mm diameter bullnose tool with a 0.8mm radius tip. It defines parameters for plunge, cutting and skim feed rates then describes the toolpath which makes multiple passes to rough the material.