Precise 100 Quick Reference

Using the Precise 100 reader

General Information
The Precise 100 readers—Precise 100 MC, Precise 100 AX and Precise 100 PC-Card—require the Precise 100 Drivers to be installed
on the computer to work. See the “Installation of the Precise 100 reader” section for more information about installation.
Correct finger placement
Correct and consistent finger placement is crucial for success.
• Try to capture the center of the fingerprint
ο Position the cuticle level with the center of the sensor
ο Touch the small nubs above the sensor (when available)
• Avoid rotating the finger
• Place the finger flat to the sensor
• Press with medium pressure
Enhancing the fingerprint image quality
If your finger is very dry
• Try to press more firmly
• Moisten your finger by breathing on it
If your finger is very damp
• Try to press less firmly
• Wipe your finger dry
More tips
• Try placing your finger the way you did during enrollment
• Keep the sensor surface clean
ο If necessary, use a cotton cloth to clean the surface
ο Do not use paper tissues for cleaning, they may scratch the surface
• If your fingerprint is still not recognized, please consider re-enrollment to get a better matching template

Installation of the Precise 100 reader

General information
The Precise 100 readers require the Precise 100 Drivers to be installed on the computer to work. The Precise 100 Drivers package is
available for free download from Precise Biometrics’ Web site, www.precisebiometrics.com/downloads. The Precise 100 Drivers
may also be bundled with an application that uses the Precise 100 reader.
System Requirements
• Windows® XP or Windows® 2000
• Minimum 300 MHz Pentium processor.
• USB or PCMCIA port
Installation of a Precise 100 MC or Precise 100 AX reader
1. Install the Precise 100 drivers.
Run the setup file in the Precise 100 Drivers package or follow installation instructions in the application
that bundles the Precise 100 Drivers.
2. Connect the reader
Connect the Precise 100 MC or Precise 100 AX reader to the USB port on the computer and the reader
will now work.
Installation of a Precise 100 PC-Card reader
1. Install the Precise 100 Drivers
Run the setup file in the Precise 100 Drivers package or follow installation instructions in the application
that bundles the Precise 100 Drivers.
2. Insert the Precise 100 PC-Card reader
Insert the Precise 100 PC-Card reader into the PCMCIA slot in the computer and the Precise 100 PC-Card
reader will now work.
Maintaining the Precise 100 reader
• Protect the Precise 100 reader from any kind of physical damage.
• Ensure that you are electrostatically discharged before putting the finger on the sensor. High electrostatic discharges might
damage the fingerprint sensor.
• Keep the sensor surface clean or there is an increased risk that the fingerprint can’t be successfully matched.
• If necessary, clean the surface with a clean cotton cloth. You can dampen the cloth slightly with a cleaner.
• Do NOT use paper tissues for cleaning purposes, because they may scratch the surface.
• Do NOT spray cleaner directly onto the fingerprint reader.
• Do NOT use chlorine-based cleaners, non-chlorine bleach, or chlorine-based bathroom or mildew cleaners.
• Do NOT use any solvents, such as acetone, paint thinners, turpentine etc.

Product Warranty information

Please be informed that this Precise 100 reader is covered by a limited product warranty pursuant to which this Precise 100 reader will be free from
defects in design, materials and workmanship for a period of twelve (12) months from the time of delivery from Precise Biometrics to the Precise
Biometrics partner from which you purchased this Precise 100 reader (the “Partner”). In case of a defect covered by the warranty, the defective unit
shall be returned to the Partner, who will procure that the defective unit is repaired or replaced.
THE ABOVE PARAGRAPH IS AN EXTRACT OF THE STANDARD PRECISE BIOMETRICS LIMITED PRODUCT WARRANTY, AND
SHALL NOT BE CONSIDERED OR CONSTRUED AS AN INDEPENDENT WARRANTY STATEMENT. FOR THE COMPLETE
WARRANTY CONDITIONS, WARRANTY LIMITATIONS, CUSTOMER RESPONSIBILITIES AND OTHER TERMS AND CONDITIONS,
PLEASE CONTACT THE PARTNER.

Electromagnetic compatibility (EMC) Notices

Electromagnetic compatibility (EMC) is the ability of electronic equipment to function properly together in the electronic environment.
CE Notice (Europe)
The Precise 100 readers, Precise 100 MC, Precise 100 AX and Precise 100 PC-Card meets the following technical standards:
• EN 55022:1994 Limit B (Radiated emission)
• EN 55024:1998 (Immunity of IT-equipment)
FCC Information (USA)
The Precise 100 MC and Precise 100 AX devices have been certified to the Class B digital device requirements as specified in the FCC rules and
regulations (CFR47 Part 15 Subpart B).
The Precise 100 MC and Precise 100 AX devices complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
The Precise 100 PC-Card complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

General Information and Contacts

The information in this Quick Reference is protected by copyright and may not be reproduced in any form without written consent
from Precise Biometrics. The information in this Quick Reference is subject to change without notice. Precise Biometrics shall not be
liable for any technical or editorial errors herein, nor for incidental or consequential damages resulting from the use of this Quick
Reference. Precise Biometrics publishes this Quick Reference without warranty. Copyright © Precise Biometrics, 2004
www.precisebiometrics.com

Sweden USA
Precise Biometrics AB Precise Biometrics Inc.
Scheelevägen 19 C, SE-223 70 Lund 8300 Boone Boulevard, Suite 500, Vienna, VA 22182
Phone: +46 46 311 100, Fax +46 46 311 101 Phone: +1 (703) 848 9266, Fax +1 (703) 832 0577
Support: [email protected] Support: [email protected]
Info: [email protected] Info: [email protected]