CIVIL APPLICATIONS

Flood Protection
Water Control
Cut-Off and Containment
Marine Structures
Installation Equipment
 TABLE OF CONTENTS
ShoreGuard®
Synthetic Sheet Piling
•  About CMI 04
UltraComposite™ •  Proven Performance 05
Sheet Piling and Piles
•  Flood Protection 06
AlumiGuard™
Aluminum Sheet Piling •  Water Control 08

TimberGuard® •  Cut-off & Containment 10

Marine Piling and Timber
•  Marine Structures 12
PileClaw ® •  Installation Equipment 14
Installation Equipment

ArmorWare™
Components and Accessories
ABOUT CMI PROVEN PERFORMANCE
Crane Materials International (CMI) is CMI’s products and services provide sustainable, high
quality solutions at substantial cost saving’s. The use
the leading developer and manufacturer
of our products has proven to significantly lower the
of high performance products and
project’s carbon footprint compared to conventional
engineered solutions. Our manufacturing materials.
facilities enable us to exceed customer Simply put, we are a full-service provider of specialty “The use of our products
needs by providing a wide range of products, installation equipment, engineering and
has proven to significantly
environmentally responsible, cost-effective technical services, offering economical solutions to
marine, flood, seepage, and chemical containment
lower the project’s
synthetic and aluminum products for
applications in an environmentally friendly way. carbon footprint.”
your marine, flood, seepage, and chemical
containment problems. Our expertise in the civil construction market focuses
primarily on the following applications:
By providing innovative technologies and specialized
technical equipment, our products provide engineers, •  Flood Protection
contractors, and owners alternatives to traditional •  Water Control
materials and practices used in the construction
•  Cut-Off and Containment
industry. Together, these products, technologies and
•  Marine Structures
services constitute engineered systems that serve
a variety of applications in the civil construction •  Installation Equipment
markets.
Carbon Footprint Comparison
ShoreGuard® VSP
vs. Steel Sheet Pile

25000

20000

15000

Tonnes CO2

Steel PZ23.5

Steel PZ23.5
10000

ShoreGuard

ShoreGuard
5000

Dasserat, QC Material
Manufacturing
Material
Transportation Saginaw, MI

4 cmisheetpiling.com | cmilc.com  770-933-8365 | [email protected] 5

FLOOD PROTECTION THE PROJECT “Flood Control projects using CMI’s family of synthetic sheet piling
have been in service for over 25 years”

In 2008, for the first time in more than twenty years, ShoreGuard® was chosen for a number of reasons:
FEMA began updating Flood Insurance Rate Maps. • Substantial cost savings
In doing so, FEMA deemed many levee systems
• Corrosion-resistant
unacceptable including the San Francisco Bay area.
• High strength to weight ratio
Many of the cities in the area immediately began
searching for an economically feasible solution to • Offers seepage protection
increase the height, stability and overall integrity of • Rodent aversion
their levee system. After analyzing all options, the Delays in the permitting process left only one month to
city of Redwood Shores, CA chose ShoreGuard® vinyl complete the installation. With the use of a mobilram
sheet pile. unit, the construction crew was able to install the
ShoreGuard® sheets three times quicker, enabling the
project to be completed on time.

FLOOD WALL AND

FLOOD WALL ON FLAT LAND SEEPAGE BARRIER ON LEVEE SEEPAGE BARRIER FOR A T-WALL

Coranado, CA

In terms of property damage, floods are Flood control projects using CMI’s family of synthetic
sheet piling have been in service for over 25 years.
the second most expensive type of natural
ShoreGuard® and UltraComposite™ sheet piling is
disaster people face. For centuries, business
commonly used in projects designed to stabilize and
owners, government agencies, and engineers raise the height of levees and earthen dams. CMI
have all looked at ways to protect valuable sheet piling can help to prevent overtopping, internal
property from flood damage. It is common seepage, piping of stratum, surface erosion and
rodent damage. ShoreGuard® and UltraComposite™
for flood wall and levee repair projects to be
sheet piling is also used for cantilevered flood walls
completed for half the cost using CMI Sheet
in levee repair projects. In fact, CMI’s sheet piling
Piling when compared to using conventional protects some of the nation’s most valuable assets,
materials such as steel and concrete. including international airports and some of the largest
refineries in the world.
The significance of this cost savings cannot be
over-emphasized as the world faces the challenge CMI’s synthetic sheet piling has been exhaustively
of funding the repair and upgrading thousands of tested and used by the U.S. Army Corps of Engineers
miles of levees and earthen dams which do not meet for over 20 years. The performance is proven. If you are
current FEMA standards or traditional 100 year flood attempting to control flooding, overtopping, internal
design criteria. Considering the magnitude of the seepage, piping of stratum, surface erosion or rodent
situation, flood control projects using ShoreGuard® and damage in a flood control, levee repair or earthen dam
UltraComposite™ sheet piling would result in saving project then CMI Sheet piling has the solution.
millions and possibly billions of dollars for municipal,
state, and federal governments. Redwood Shores, CA

6 cmisheetpiling.com | cmilc.com  770-933-8365 | [email protected] 7

WATER CONTROL THE PROJECT “Projects ranging from small retention ponds to the largest fresh water
diversion structure in the world have utilized CMI’s sheet pile products.”

North America’s largest conservation facility, material made predominate from post-industrial
The Wilds, rose to critical status in 2007. The main recycled materials. ShoreGuard® vinyl sheet pile and
beaver dam was abandoned, causing the lowlands ArmorWare™ aluminum cap was installed by only a
to drain. With the support of the Environmental two-man crew and a mini-excavator.
Protection Agency Surface Water Improvement
Current Application in Water Control are:
Fund and the U.S. Partners for Fish and Wildlife
• Baffle walls
Program, the water level was restored, native
wetlands species were replanted, and a trail • Weirs
system was installed. Because aesthetics and • Silt fences
long-term performance of the constructed weir • Breakwaters
system were priority, vinyl was the preferred • Fly Ash Ponds
building material. ShoreGuard® sheet piling met
• Channel Lining
the necessary aesthetic requirements, but was
• Retention Ponds
also chosen because it’s a sustainable, eco-friendly
• Water Diversion

TOE WALL FOR SCOUR PROTECTION WEIR & UNDERMINING PROTECTION BANK RETAINING WALL

Port Arthur, TX

A water control structure is a device that Projects ranging from small retention ponds to the
largest fresh water diversion structure in the world
alters the flow of water in a stream, drainage
have utilized CMI’s sheet pile products. ShoreGuard®
channel or storage pond. Engineers and
and UltraComposite™ sheets have revolutionized the
hydrologist have been designing water industry by providing a cost-effective, sustainable
control structures for thousands of years building material which provide a long service life
to divert water to irrigate fields and protect without toxic coatings or preservatives.

against flooding. In the past many of these Top project engineers, government agencies, and
structures were constructed from earth, general contractors all over the world choose to design
with and install CMI sheet piling for a long list of
concrete, or steel, and require routine
water control applications. From demanding projects
maintenance and regular inspections. involving harsh acid mine drainage to simple erosion
Advancements in manufacturing and material science control or water diversion operations, the CMI family
have provided additional products and technologies of sheet pile products have been used successfully
to design longer lasting, cost effective water control for over two decades. In fact, the National Resource
structures. The family of synthetic sheet pile from CMI Conservation Service (NRCS) specifies vinyl sheet
have proven to be one such technology. pile for a number of different applications including;
toe walls for scour protection, weirs, undermining
ShoreGuard® and UltraComposite™ sheet piling are
protection, stream bed grade stabilization, bank slope
commonly used in the construction of Water Control
stability, and bank retaining walls.
applications such as baffle walls, weirs, silt fences and
breakwaters. Cumberland, OH

8 cmisheetpiling.com | cmilc.com  770-933-8365 | [email protected] 9

CUT-OFF & CONTAINMENT THE PROJECT “Compared with many slurry installations, CMI sheets require a small
construction footprint and less equipment at the job site.”

Hackensack Meadowlands is one of the most Common reasons industry leading engineers rely on
contaminated areas in the country. It consists of CMI’s line of synthetic sheet piling:
three different Superfund sites affected by mercury, • Our sheet piles are driven directly into the ground,
PCBs and VOCs. In 1999, the NJ Meadowlands so there are no dangerous air emissions.
Commission created the EnCap project to remediate • We reduce soil mixing, hazardous material disposal
municipal landfills. In order to protect Berry Creek, issues, and the need for large volumes of water at
a tributary of the Hackensack River, engineers a jobsite.
designed an underground vertical barrier to contain • The National Resource Conservation Service (NRCS)
the PCBs. ShoreGuard® vinyl sheet pile with sealed specifies vinyl sheet pile for a number of different
applications including containment.
locks was determined to be the best product to
cut-off contaminates. While soil conditions in the • CMI products are lightweight, which translate into
easier handling and more economical shipping.
marsh should have been soft and organic, years of
illegal dumping made driving conditions difficult. • ShoreGuard® vinyl sheet pile requires less
CMI’s PileClaw® Installation Equipment was used to equipment on your jobsite, leaving a smaller carbon
footprint.
maximize the efficiency and predictability of driving the
synthetic sheets into the ground.
Port of Wilmington, NC
CHEMICAL CONTAINMENT SALTWATER CUT-OFF SECONDARY CONTAINMENT
CMI has decades of experience providing site. Typically, projects that use CMI sheets can avoid
excessive dangerous air emissions (created during
environmentally friendly sheet piling that
slurry wall construction when digging up contaminated
is used in some of the most challenging
soils) because the sheets are driven into the ground.
chemical containment, levee seepage, Also compared to slurry walls, sheet piling structures
and groundwater cut-off projects. CMI’s generally do not require soil mixing, create hazardous
ShoreGuard® and UltraComposite™ sheets material disposal issues, require huge volumes of water
at the job site, or necessitate environmentally harmful
have been utilized in remediation projects
bentonite mining operations.
throughout the world including federally
The patented I-Beam Lock™ technology designed
funded Superfund and Environmental
into ShoreGuard® and UltraComposite™ sheet piling
Protection Agency (EPA) managed sites. improves lock integrity and durability for challenging
CMI sheet piling has been successfully used in installations. The entire surface area of CMI sheets are
corrosive chemical environments such as those impermeable, and with interlock sealant in conjunction
containing VOCs, BTEX compounds, methane vapors with the I-Beam Lock™, the sheets can provide
and Non-Aqueous Phase Liquids (NAPL). permeability rates superior to slurry. ShoreGuard®’s
chemical resistance has been optimized over the
Whether it is salt water, jet fuel, benzene or even
decades using XCR Manufacturing Technologies™. XCR
creosote, CMI sheet piling has been used in projects
integrates state-of-theart material processing, high
that are designed to offer better performance than
precision die technology, and vinyl formulations based
slurry, steel or concrete. CMI’s ShoreGuard® and
on 65 years of experience. The newest ShoreGuard®
UltraComposite™ sheets are lightweight for easy
factory is the only facility of its kind in the world,
handling and economical shipping. Compared with
designed from the ground up to produce synthetic
many slurry installations, CMI sheets require a small
sheet piling.
construction footprint and less equipment at the job Lyndhurst, NJ

10 cmisheetpiling.com | cmilc.com  770-933-8365 | [email protected] 11

MARINE STRUCTURES THE PROJECT “CMI’s sheet piling solutions offer high performance, long life cycle and
low environmental impact at substantial cost savings”

Lincoln Harbor is a large, upscale, mixed-use sealants. UltraComposite™ sheet piling and pipe
development located on the Hudson River near the piles are manufactured in an ISP facility for quality
Lincoln Tunnel. It is comprised of multiple piers, a control that ultimately determines long-term product
marina and two residential and commercial buildings. performance.
The pier sections are supported by a system of
Common applications in Marine Structures:
hundreds of wooden piles.
• Bulkheads
Over time, the structural integrity of the wooden
• Erosion control
pile system had been compromised due to damage
• Breakwaters
from marine borer attacks. To meet the engineered
requirements, Ultracomposite™ UC 50 was chosen. The • Land docks
36” Box profile shape greatly reduced the the amount • Jetties
of interlocks on the face of the wall. The reduced • Wave Break
interlocks and the sufficient effective permeability of • Channel Lining
UC 50 allowed for installation without costly interlock
• Scour Protection

BANK RETAINING WALL BULKHEAD FLATPANEL SEAWALL

Bay St. Louis, MS

CMI’s most popular brand, ShoreGuard®, Within the last decade, CMI released UltraComposite™
FRP sheet piling for the construction of heavy-duty
made its name in the marine structure
bulkhead construction as well as other marine walls.
industry over 25 years ago. ShoreGuard®
CMI offers the strongest vinyl, aluminum and FRP
sheet piling has been used for over two sheet pile profiles on the market today. Whether you
decades as a sustainable seawall and choose ShoreGuard®, AlumiGuard™ or UltraComposite™
bulkhead construction material. CMI and for your bulkhead, CMI’s sheet piling solutions offer
high performance, long life cycle and low environmental
ShoreGuard® now offer the largest selection
impact at substantial cost savings.
of synthetic and aluminum sheet piling
Beyond CMI’s sheet pile products, CMI offers
profiles that can be used in a wide variety of
components like TimberGuard® and ArmorWare™.
marine structures from homeowner seawalls These proprietary structural piles, wales, caps and
to large, commercial bulkheads. tie-rod systems are low maintenance options to
traditional materials such as treated wood, concrete,
and galvanized steel. Used in conjunction with CMI’s
products, these components can help maximize the
service life of your structure. Lincoln, Harbor NY

12 cmisheetpiling.com | cmilc.com  770-933-8365 | [email protected] 13

INSTALLATION EQUIPMENT PILECLAW “PileClaw® Mandrel, if project requires, can be used with a variety of
traditional driving equipment including cranes and excavators.”

Vinyl Sheet Pile Installation

Crane or fixed lead mounted

vibratory (ABI, Leibherr, etc.)
with PileClaw® Mandrel (1)

Soil Blow Count⁽²⁾

N=20

Hammer Size
Crane Mounted
Vibratory Hammer

PileClaw®

Soil conditions can make driving any sheet The Mandrel can be used with a variety of traditional
driving equipment including cranes, excavators and Excavator Mounted
piling to significant depths a challenging Vibratory Hammer/
Mobilram pile drivers. CMI has specifically fabricated Compactor(3)
task. PileClaw® Installation Equipment’s
the Mandrel to work with multiple CMI profiles and
proprietary technology offers 20 years of sheet lengths.
N=0

documented performance and has several With an adjustable width, PileClaw® DriveGuide can
Granular Soils Cohesive Soils
Soil Type
quality control and construction advantages work for a variety of sheet piles and Mandrels. Its
over conventional sheet driving applications. built-in system helps keep sheets aligned and 1. PileClaw® Mandrel is also used when sheet lengths become difficult to
manage due to length, even in softer soils.

CMI’s PileClaw® Installation Equipment plumb during installation taking some stress off 2. Installations in high blow count soils may require additional construction
techniques not addressed in this graph.

the interlocks. When used in conjunction with the 3. Excavator mounted installation method will vary greatly based on equipment
technology incorporates patented features specifications and sheet length.

PileClaw® Mandrel, the PileClaw® DriveGuide also holds

that help deliver superior results. sheet piles in the ground during Mandrel extraction,
As the flagship of CMI’s line of installation equipment, increasing the rate of installation. Compact for
the PileClaw® Mandrel has been successfully used in many shipping, PileClaw® DriveGuide is color coded for easy
different driving conditions and has installed CMI sheet on-site assembly, reducing labor time in the field. Coraopolis, PA
piling to depths as great as 70 feet.

14 cmisheetpiling.com | cmilc.com  770-933-8365 | [email protected] 15

1165 Northchase Pkwy SE
Suite 300
Marietta, GA 30067
P: 800-256-8857
F: 770-933-8363
[email protected]
www.cmilc.com

ShoreGuard®
Synthetic Sheet Piling

UltraComposite™
Sheet Piling and Piles

AlumiGuard™
Aluminum Sheet Piling

TimberGuard®
Marine Piling and Timber

PileClaw ®
Installation Equipment

ArmorWare™
Components and Accessories

Physical properties are defined by ASTM testing standards, The Aluminum Association Design Manual, The Naval Facilities
Design Manual DM 7.2, and The US Army Corps of Engineers General Design Guide: PVC Sheet Pile and/or standard engineering
practice. The values shown are nominal and may vary. The information found in this document is believed to be true and
accurate. No warranties of any kind are made as to the suitability of any CMI product for particular applications or the results
obtained there from. Crane Materials International is a Crane Building Products® company. CRANE MATERIALS INTERNATIONAL
products are covered by one or more of the following U.S. Patents and International Patents: 4,674,921; 4,690,588; 5,292,208;
5,145,287; 6,000,883; 6,033,155; 6,053,666; D420,154; 6,575,667; 7,059,807; 7,056,066; 7,025,539; 7,393,482; 5,503,503;
5,803,672; 6,231,271; 1,245,061CA; 7,914,237 and other patents pending. © 2005-2014 Crane Materials International.
All Rights Reserved.