Scribd
Upload
72 views3 pages

Document

The document provides instructions for updating the firmware on an SP 4510SF printer. It is a 6 step process: 1. Copy the firmware update file to the root directory of an SD card and insert it into the printer. 2. Access the firmware update menu in the printer's interface and select "Update". 3. Wait for the update to complete, then power off the printer and remove the SD card. 4. Power the printer back on and confirm the administrator and supervisor passwords. 5. Verify the update was successful by printing a test page and checking the firmware version.

Uploaded by

vinhnguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views3 pages

Document

The document provides instructions for updating the firmware on an SP 4510SF printer. It is a 6 step process: 1. Copy the firmware update file to the root directory of an SD card and insert it into the printer. 2. Access the firmware update menu in the printer's interface and select "Update". 3. Wait for the update to complete, then power off the printer and remove the SD card. 4. Power the printer back on and confirm the administrator and supervisor passwords. 5. Verify the update was successful by printing a test page and checking the firmware version.

Uploaded by

vinhnguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Home Manuals / Firmware Update - SP 4510SF

Firmware Update - SP 4510SF

Posted in May 25, 2017 By Administrator BNW Category Manuals

Firmware Update

1st step

Record in the root of the SD card the file available at the end of this (note: copy the folder
and do not change the name "romdata").

** Remembering that it can be any conventional SD.

2nd step

With the printer turned off:

Remove the sealing unit from the imaging unit (if present);

Insert the SD card in the back of the machine into Slot 2 as shown below:

2** Note that to open Slot 2 it is necessary to unscrew the screw below it. As the image
below:

3rd step

Turn on the printer, and wait for the Sd Card file to load.

1
Click "Engine" and then "Update", as shown in the image below:

Note: On the side of the square shows the current version (ROM), and which version will be
updated (NEW) (1.39: 09 specifically for this post).

Wait to load the update.

The update will be complete when the information: "Update done"

4th step

Turn off the printer and remove the sd card and reconnect the machine.

The firmware is up to date.

5th step

Turn the printer back on;

The panel prompts you to confirm the Administrator and Supervisor password. By default,
confirm BLANK both passwords (one at a time)

Wait for all the buttons to appear on the

The panel prompts you AGAIN to confirm Administrator and Supervisor password. By
default, confirm BLANK both passwords (one at a time)

Deligue machine will be requested as no painel.

Step 6 - Verify that the update has been installed.

Turn on the machine;

2
Put a sheet of paper in the bypass or drawer for the test.

Wait for all the buttons to appear on the panel;

When the "Printer" icon appears on the screen, you can request the configuration page by
clicking the "User Tools / Couter" button on the machine keyboard;

In the panel click the "Printer - Specifications" option, then "List - Test Printer" and then
"Page Setup".

On the sheet that will come out, comes the version in the first line. Check if it is the version
chosen (in this case, made available in this post #Engine 1.32: 09).

Watch the video below and see the step by step.

You might also like