Scribd
Upload
7K views

NH Error Codes

The document describes New Holland error codes, noting that the first digit indicates the sensor, the second indicates the fault type, and the third is always E. It lists 35 total error codes ranging from 00E to 91E, providing descriptions of each that identify issues like open or shorted sensors, out of range high or low readings, or driver and memory faults. Diagnostic mode is entered by pressing an ambient button three times within five seconds, and error codes will display every two seconds.

Uploaded by

HERNANDO A BECERRA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
7K views

NH Error Codes

The document describes New Holland error codes, noting that the first digit indicates the sensor, the second indicates the fault type, and the third is always E. It lists 35 total error codes ranging from 00E to 91E, providing descriptions of each that identify issues like open or shorted sensors, out of range high or low readings, or driver and memory faults. Diagnostic mode is entered by pressing an ambient button three times within five seconds, and error codes will display every two seconds.

Uploaded by

HERNANDO A BECERRA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

New Holland Error Codes

Notes:
1. First digit is sensor designator.
2. Second digit is fault designator.
3. Third digit is ‘E’ for error code display.
4. Diagnostics mode is entered by pressing the ambient button 3 times within 5 seconds.
5. Display cycle rate is every 2 seconds while in diagnostics mode.

Error Codes (35 total):

00E Indicates end of sensor sweep.

10E Cab sensor open


11E Cab sensor shorted
12E Cab sensor out of range high
13E Cab sensor out of range low

20E Outlet sensor open


21E Outlet sensor shorted
22E Outlet sensor out of range high
23E Outlet sensor out of range low

30E Ambient sensor open


31E Ambient sensor shorted
32E Ambient sensor out of range high
33E Ambient sensor out of range low

40E Evaporator sensor open


41E Evaporator sensor shorted
42E Evaporator sensor out of range high
43E Evaporator sensor out of range low

50E Solar A sensor shorted high


51E Solar A sensor shorted low
52E Solar B sensor shorted high
53E Solar B sensor shorted low

60E Low Pressure sensor open


61E Low Pressure sensor shorted
62E Low Pressure sensor fault ‘STATIC’
63E Low Pressure sensor fault ‘LATCH OUT’

70E High Pressure sensor open


71E High Pressure sensor shorted
72E High Pressure sensor fault ‘STATIC’
73E High Pressure sensor fault ‘LATCH OUT’

80E Driver fault ‘CLUTCH OVER CURRENT’


81E Driver fault ‘OPEN CLUTCH’
82E Driver fault ‘ACTUATOR OVER CURRENT’
83E Driver fault ‘BLOWER OVER CURRENT’

90E Memory fault ‘WRITE ERROR’


91E Memory fault ‘READ ERROR’

You might also like