0% found this document useful (0 votes)
58 views2 pages

Analog Input

The document discusses the characteristics of analog to digital converters (ADCs) and digital to analog converters (DACs) for voltage and current input and output. For ADCs, a voltage input of 0V results in a digital output of 0 and 10V results in an output of 4000, with each unit of digital output corresponding to an input of 2.5mV. For current input, 0mA results in a digital output of 0 and 10mA results in 2000 and 20mA results in 4000, with each digital unit equal to an input of 5μA. For DACs, a digital input of 0 results in a voltage output of 0V and 4000 results in 10V, with each digital unit equal to an output

Uploaded by

Imran Shaukat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
58 views2 pages

Analog Input

The document discusses the characteristics of analog to digital converters (ADCs) and digital to analog converters (DACs) for voltage and current input and output. For ADCs, a voltage input of 0V results in a digital output of 0 and 10V results in an output of 4000, with each unit of digital output corresponding to an input of 2.5mV. For current input, 0mA results in a digital output of 0 and 10mA results in 2000 and 20mA results in 4000, with each digital unit equal to an input of 5μA. For DACs, a digital input of 0 results in a voltage output of 0V and 4000 results in 10V, with each digital unit equal to an output

Uploaded by

Imran Shaukat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Wiring of voltage/current

Wiring of voltage/current Output


ADC Characteristics (voltage input)
In voltage input, digital amount 0 is output by 0V input and
4,000 is output by 10V
input.
Therefore input 2.5mV equals to digital amount 1, but value
less than 2.5mV can’t be
converted.
ADC Characteristics (Current input)
Current input 0mA becomes output 0, 10mA does 2000 and
20mA does 4000.
Therefore input 5 ㎂ equals to digital amount 1, but value less
tan 5 ㎂ can’t be
converted. So abandon it.
DAC Characteristics (Voltage Output)
Input of digital amount 0 outputs analog amount 0V, 4000 does
10V. Digital input 1
equals to 2.5mV of analog amount.
DAC Characteristics (Current Output)
In current output, digital amount 0 exchanges to 0mA, and
4,000 does 20mA. Analog
amount of digital input 1 equals to 5 ㎂.

You might also like