Digital

multimeters
DMG 600-610
Digital multimeters
DMG 600 - 610

are capable of viewing

the measurements
with high accuracy on
the wide LCD display,
which allow to control
energy distribution
networks.

 Easy and intuitive menu navigation

 LCD display with text in 5 languages
 Expandability with EXP... modules
 High measurement accuracy
 Wide range for power supply,
measurements and temperature
 Suitable for LV, MV and HV electric
systems and installations
 

 


Plug-in modules LCD display with icons and text

Optical port

APP
Wi-Fi dongle

The main features include an extended power

supply voltage range (100...440VAC), high
measurement accuracy (±0.5% for voltage and
current), expandability (using EXP modules) and
LCD interactive interface for simple use.
Main measurements and functions include:
Voltage: phase, line and system values
Current: phase values (neutral current
calculated)
Power: apparent, active and reactive phase
and total values
Power Factor per phase and total
Frequency of measured voltage value
HIGH-LOW-AVERAGE value functions for all
measurements
Maximum demand of power and current values
Voltage and current asymmetry
Total harmonic distortion (THD): voltage and current
Energy meters for active, reactive,
apparent partial and total values,
per phase and system values
Hour counter for programmable
total and partial hours
Phase active power unbalance.
 Digital multimeters DMG 600 - 610
Optical port
LCD display
Units of measure Measurement value DMG 600 and DMG 610 are equipped with a front optical port to
New icon type display, with white backlight to ensure good support programming through CX 01 and to use the functionality
visibility in environments with low light conditions. of CX 02 Wi-Fi dongle.
Scrolling text with 4 characters to show: Advantages:
• Alarm messages configured by the user • No need to remove power from the panel to connect to the
• Guide messages for the user multimeter
• Description of the setup menu and parameters. • Electrical safety (no electrical connection)
The text is available in 5 languages • IP54 guaranteed
(English, Italian, French, Spanish and Portuguese). • Convenience of working on the front.

Bar graph, percentage Limit thresholds

Type of of a full scale value On all available measurements, the user can set up to 4
measurement independent thresholds to generate alarms or activate outputs in
excess of the set values. The user can decide the activation of the
limit threshold on the overcoming of maximum, minimum values
USB and Wi-Fi dongle Subpage indication: or both, with on and off delay to protect the system from
unnecessary trippings and hysteresis thresholds to avoid the
Through the optical port, direct connection to a PC USB
Instantaneous measurements, "bouncing" around the threshold.
port (using CX 01) or via WiFi (using CX 02) is allowed.
maximum, minimum, average
CX 02 dongle (WiFi) can furthermore make: Flashing icon values and maximum demand Voltage
• Copy of the parameters
All parameters in the DMG can be saved in the CX 02
for alarms Limit
thresholds
memory and in case reloaded on the same device
(backup function) or on a different one of the same Active energy meter
type (replication of the configuration).
always available in all
• Clone of the device settings
In addition to the copy of the parameters, the current pages Relay output t
(using EXP10 03)
values of energy meters and hour counters can be
saved in memory as well, in order to fully replicate a Relay
DMG on another device of the same type or to restore
the DMG to a previously saved state. t

Scrolling text in case of alarms, messages Management of power

for the user or parameter setup "maximum demand"
Alarms and notification Often in the contracts between user and utility, a limit on the maximum
demand of active power, calculated as an average over a time window,
by flashing display exists. In order to help the user, DMG 600 and DMG 610 include features
Tied to the limit thresholds or to the activation of a digital which allow the control of demand limits as follows:
input, there are available 4 alarms with user-configurable • 4 methods of integration of active and reactive power:
text description. When an alarm occurs, an icon and a - Fixed window
descriptive text appear on any page of the meter. Expandability (1 slot) - Moving average
Setting a parameter, the user can activate the flashing of - Synchronisation via digital input (typical solution used by utilities)
The configuration of the devices in different installations can have many variants, for
the display backlight in case of alarm. The alarm becomes - Synchronisation message via the serial interface (Modbus)
example the types of communication (USB, RS485, Ethernet) or the number of inputs
visible even from a distance, saving a warning light • Setting a threshold on the average power value, in order to activate outputs
and outputs required.
indicating a global alarm. which can disconnect non-priority loads to limit the need of power or to
DMG 600 and DMG 610 support expandability by EXP... modules.
notify the user about the need to reduce the loads.
The expansion modules shared with other devices lighten the costs of management
and first of all guarantee configuration flexibility at installation time and secondly ease kW Peak demand
of performance increasing when the system is already in operation.
The following EXP modules are available: Peak usage rescheduled to
• Digital inputs and outputs (static type to generate energy pulses or relay type to control coils) return below lower threshold

• USB, RS232, RS485 and Ethernet communication.

The module is recognized automatically by the base device which set it to be used. The particular shape of Shaved peak demand

the back of the DMG lets the addition of the expansion module without increasing the space required inside
the electrical panel, because the size of the EXP module is fully contained in the base module size, limited to
65mm only, including connectors.

t
 Sam1 APP
Furthermore, CX 02 dongle is the access point to the device through
the Sam1 APP.
Thanks to Sam1, one can:
• See on smartphones or tablets all the measures of the multimeter
• Send commands, such as counters reset or enabling and
disabling of multimeter outputs
• Set the parameters, save a copy in a file and retrieve it in case of
need (the file can be sent via email as well)
• See active user alarms.
Sam1 APP can be downloaded from
Google Play Store or Apple iTunes.

PARAMETER SETTING MEASUREMENT VIEWING SEND COMMANDS ALARM VIEWING

Compatibility with Synergy energy management software

DMG 600 and DMG 610 are compatible with the current version of Synergy, which can be
downloaded from www.LovatoElectric.com website. Thanks to the built-in RS485 serial port,
DMG 610 can be immediately added to an existing network without needing extra external
accessories or expansion modules. However, if another type of communication is required, through
the modules EXP..., both DMG can be equipped with the EXP10 13, adding an Ethernet port, suitable
to work with both static IP and dynamic IP address, making the DMG network configuration similar to
which is normally carried out for PCs.
HOW TO ORDER

LCD multimeters Order code Description

DMG 600 Backlight icon LCD, 72x46mmm, auxiliary supply100-440VAC / 120-250VDC,
front optical port
DMG 610 Backlight icon LCD, 72x46mmm, auxiliary supply 100-440VAC / 120-250VDC,
front optical port and RS485 port

Operational characteristics
– Auxiliary supply voltage range: 100-440VAC / – Non-volatile memory for data storage
120-250VDC – Communication protocol Modbus-RTU, ASCII
DMG 600 - DMG 610 – Voltage measurement range: 50-720VAC and TCP
– Usage in medium and high-voltage systems – Compatible with software and APP
with voltage transformers – Flush-mount housing 96x96mm
– Rated input current: 1A or 5A – IEC degree of protection: on front IP54; IP20 at
– Frequency measurement range: 45-66Hz terminals.
– True RMS measurements: for voltage and
current
– Measurement accuracy:
• Voltage: ±0.5% (50-720VAC)
• Current: ±0.5% (0.1-1.1In) Certifications and compliance
• Power: ±1% f.s. Certifications obtained: EAC, cULus.
• Frequency: ±0.05% Compliant with standards: IEC/EN 61010-1,
• Active energy: Classe 1 (IEC/EN 62053-22) IEC/EN 61000-6-2, IEC/EN 61000-6-3,
• Reactive energy: Class 2 (IEC/EN 62053-23) UL 61010-1, CSA C22-2 n°61010-1.

Expansion modules Order code Description Communication Order code Description

Inputs and outputs ports and CX 01 USB/optical dongle for
EXP10 00 4 opto-isolated digital accessories PC − LOVATO Electric
inputs product connection,
for programming, data
EXP10 01 4 opto-isolated static
download, diagnostics
outputs
and firmware upgrade.
EXP10 02 2 digital inputs and Complete with cable,
2 static outputs, CX 01
1.8m long
opto-isolated
CX 02 Wi-Fi dongle for
EXP10 03 2 relay outputs rated PC − LOVATO Electric
5A 250VAC product programming,
EXP10...
EXP10 08 2 opto-isolated digital data download,
inputs and 2 relay CX 02
diagnostics and
outputs rated 5A cloning
250VAC EXP80 00 Plastic insert for
Communication ports customising label
EXP10 10 Opto-isolated USB EXP80 00 fixing
interface
EXP10 11 Opto-isolated RS232
interface
EXP10 12 Opto-isolated RS485
interface
EXP10 13 Opto-isolated Ethernet
interface with web
server function
 details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value.
The products described in this publication are subject to be revised or improved at any moment. Catalogue descriptions and

In addition, products should be installed and used by qualified personnel and in compliance with the regulations in force for
electrical systems in order to avoid damages and safety hazards.

www.LovatoElectric.com
Follow us
LOVATO ELECTRIC S.P. A. Tel +39 035 4282111 Sales Department:
VIA DON E. MAZZA, 12 Fax +39 035 4282200 Tel. +39 035 4282354
24020 GORLE (BERGAMO) ITALY E-mail [email protected] Fax +39 035 4282400

LOVATO Electric offices in the world

PD 98 GB 07 14

United Kingdom Germany Spain Poland Turkey Romania

LOVATO ELECTRIC LTD LOVATO ELECTRIC GmbH LOVATO ELECTRIC S.L.U. LOVATO ELECTRIC SP. Z O.O. LOVATO ELEKTRK LTD LOVATO ELECTRIC SRL
Tel. +44 8458 110023 Tel. +49 7243 7669370 Tel. +34 93 7812016 Tel. +48 71 7979010 Tel. +90 216 5401426-27-28 Tel. +40 372 074 155
www.Lovato.co.uk www.LovatoElectric.de www.LovatoElectric.es www.LovatoElectric.pl www.LovatoElectric.com.tr www.LovatoElectric.ro
Czech Republic USA Canada United Arab Emirates China
LOVATO ELECTRIC S.R.O. LOVATO ELECTRIC INC. LOVATO ELECTRIC CORP. LOVATO ELECTRIC ME FZE LOVATO ELECTRIC (SHANGHAI) CO LTD
Tel. +420 226 203203 Tel. +1 757 5454700 Tel. +1 450 6819200 Tel. +971 4 3712713 Tel. +86 21 62961837
www.LovatoElectric.cz www.LovatoUsa.com www.Lovato.ca www.LovatoElectric.ae www.LovatoElectric.cn

LOVATO Electric products are available in over 100 countries through its distributors