Catalogue Symko en 2017

Parts and components
catalogue
Your reference number:
Symko
/ Commercial and technical center
In order to ensure quick interventions, we are
located near you, everywhere in France.
BBRue de la Guillauderie
Parc d’activités de Tournebride
44118 LA CHEVROLIÈRE
France
BBPhone +33 2 51 70 13 13
BBFax +33 2 51 70 04 04
[email protected]
BBwww.symko.fr
Keep up with the latest news about Symko, For all order placed before 5pm, and subject
additional information and all products and to stock availability
services on enjoy express delivery
www.symko.fr on D+1
www.symko.fr
introduction
HYDRAULIC
We are proud to present to you the 3rd edition of our catalogue “parts and services
SYMKO”. Years pass by, the scope of our offer expands, and so our catalogue.
Our range of products has expanded: we are now able to offer you the complete range
of hydraulic components for mobile applications from BOSCH REXROTH and LINDE
Mechanical
HYDRAULICS. Of course, the DANFOSS, BONDIOLI and BUCHER HYDRAULICS ranges
are always available, with even more components. Likewise, for more responsiveness,
we develop the “reman” offer for hydraulic pumps and transmissions.
For the mechanical part, in addition to the well-known CARRARO and DANA
transmissions-gearboxes-drive shaft; we are able to offer you all TWINDISC-
TECHNODRIVE, ZF and BREVINI products. Our repair service has also seen its expertise
evolve, and can repair your axles, gearboxes …
electric
Finally, for the electrical components and diesel engines, thanks to the signature of
a distribution contract with BOSCH GROUP, we propose to you their entire range of
starters, alternators, injectors, injection pumps and sensors.
Yet the catalogue does not do everything: service and responsiveness have always
been at the heart of our priorities. For us, a spare part, a repair is not not only a
reference or file number: so, to better serve you and advise you on a daily basis, we
have increased our technical sales staff both in the field and in our offices.
diesel
We are proud to count you as one of our customers, and this year again we will do our
utmost to serve you better and to fulfil our commitments in terms of responsiveness,
technical expertise and services.
Stéven Le Pennec
Services
SYMKO Business Manager
appendices
www.symko.fr
Table of contents
Presentation 6 4.Cylinders
Single-acting cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Double-acting cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . 72
I. Hydraulic 7 Double-acting cylinders without any fittings. . . . . 73
Telescopic cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
“Wood splitter” double-acting
1.Hydraulic pumps trunnion-mounted cylinders. . . . . . . . . . . . . . . . . . . . . . . 81
Double-acting micro cylinders. . . . . . . . . . . . . . . . . . . . 81
Hydraulic gear pumps for tractors. . . . . . . . . . . . . . . . . . 8 Hydraulic brake cylinders . . . . . . . . . . . . . . . . . . . . . . . . . 82
Hydraulic gear pumps for combines Hydraulic stands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
and silagers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
CCLS type piston pumps. . . . . . . . . . . . . . . . . . . . . . . . . . 36
Piston pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 5.Filters
Hand pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Inline filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Gear pumps accessories . . . . . . . . . . . . . . . . . . . . . . . . . 41
Suction strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Pressure filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Remanufactured pumps and continuously
Semi-immersed filter for tanks. . . . . . . . . . . . . . . . . . . . . 86
variable transmissions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Grape harvesters filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Pollution measuring devices. . . . . . . . . . . . . . . . . . . . . . 88
2.Hydraulic motors Mobile depollution units. . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Gerotors motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Danfoss range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 6.Accumulators
Bondioli range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Gear motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Hydraulic accumulators. . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Steering units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 FPU-1 HYDAC – Accumulators inflation
and control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Piston engines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
3.Valves 7.Heat exchangers and coolers

Heat exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Rexroth valve parts - Tractors. . . . . . . . . . . . . . . . . . . . . . 63
Temperature sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Monoblock directional control valves. . . . . . . . . . . . 64
Dual effects valves for log splitter . . . . . . . . . . . . . . . . . 65
Modular directional control valves . . . . . . . . . . . . . . . 65 8.Accessories
Bondioli valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Flow-regulator valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Electrically controlled valves . . . . . . . . . . . . . . . . . . . . . . 67
Pressure limiters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Selector valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Check valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Solenoid valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
PVG32 valves / Solenoids . . . . . . . . . . . . . . . . . . . . . . . . . 69
Valves controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 9.Hydraulic units
Compact hydraulic units. . . . . . . . . . . . . . . . . . . . . . . . . . 97
Hydraulic units for scrapers . . . . . . . . . . . . . . . . . . . . . . . 97
Hydraulic units kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Accessories for hydraulic units. . . . . . . . . . . . . . . . . . . . 99
www.symko.fr
Table of contents
10.Pressure control 6.Specific tooling
Pressure control cases. . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Specific tooling kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Manometers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Benches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Microbore hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Technical catalogues . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Hydraulic measuring instruments. . . . . . . . . . . . . . . . 104
III. Electrical parts and

II. Mechanical parts and components 117
components 106 Joysticks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Electrical control units. . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
1.Housings
Gearboxes for hydraulic gear pumps. . . . . . . . . . . 107
IV. Components for
Multi-purpose gearboxes. . . . . . . . . . . . . . . . . . . . . . . . . 107 diesel engines 120
Pumps drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Gearboxes for hydraulic gear pumps. . . . . . . . . . . 109
Kit gearboxes/pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 1.Injection systems
Injection pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
2.Axles Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Axles parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 2.Starters and alternators
Complete Axles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Starters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
How to recognize the origin of an axle ? . . . . . . . 112 Alternators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
3.Gearboxes 3.Accessories
Gearboxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Battery chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Gearboxes parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Complete gearboxes. . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 IV. Services 125
Axles, final drives and gearboxes repairs. . . . . . . . 126
4.Final drives Hydraulic repairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Transmissions and final drives. . . . . . . . . . . . . . . . . . . . 114
Final drives parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Complete final drives. . . . . . . . . . . . . . . . . . . . . . . . . . . 114 V. Appendices 129
Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
VI. General Terms and

5.Drive shaft
Conditions 145
Cardan shafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Cardan shafts and drive shafts. . . . . . . . . . . . . . . . 115
Cross-braces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Reference index 150
www.symko.fr
Presentation
A team near you, at your service
BB3 traveling technical sales representatives throughout the

country to meet your specific needs.
BB4 based technical sales representatives for all your questions
and parts orders.
Leading brands
PRODUITS INDUSTRIELS
TECHNODRIVE
A complete stock for a greater responsiveness
BBMore than 6,000 references, 70,000 parts available.

BBA specialized 4-storekeepers team.
A unique technical service

BBRepairs.
BBReman.
BBBench tests.
www.symko.fr
I.
PART
Hydraulic
1. Hydraulic pumps
2. Hydraulic motors
3. Valves
4. Cylinders
5. Filters
6. Accumulators
7. Heat exchangers
and coolers
8. Accessories
9. Hydraulic units
10. Pressure control
1 . Hydraulic pumps
/ Hydraulic gear pumps
for tractors
The following list is not exhaustive. You may contact us for
another type of pump not listed. We also propose a set of
seals for each pump; to know the one you need, please refer
to the price list.
BOBARD TRACTORS
NOTE
i Seals kits: Contact us / Piston pumps, see p36 (new) and p44 (reman)
Fig.1 Type of Displacement Rotation Type of drive

Pump description Reference Picture
tractors (cm3/tr) L R shaft
5,5 0 510 325 006

M 75 R CONE 1/5 Simple fig. 1
16 0 510 625 022
CC55
CC70
16 R CONE 1/5 Simple 0 510 625 022 fig. 1
Fig.2 620
621
K30
K35 8 L CONE 1/5 Simple 0 510 415 313 fig. 3
K40
8 0 510 415 313
Fig.3 K42 L CONE 1/5 Simple fig. 3
16 0 510 615 314
M55 16 L CONE 1/5 Simple 0 510 615 314 fig. 3
K53 16 R CONE 1/5 Simple 0 510 615 010 fig. 4
Grape harvester
0 510 900 028
Fig.4 PX55 16+5,5 R CONE 1/5 Simple fig. 2
(ex 0 510 665 020)
CARRARO TRACTORS
NOTE
Type of Displacement Rotation Type of drive

321 11 R CONE 1/5 Simple 0 510 525 009 fig. 5

Fig.5 451.4
481.4
11 L CONE 1/5 Simple 0 510 525 311 fig. 5
571.4
581.4
450
16 L CONE 1/5 Simple 0 510 625 315 fig. 5
4500
5500 11 L CONE 1/8 Lifting pump 0 510 525 313 fig. 6

Fig.6
0 510 525 331
4800 11 L 9 tooth gear drive Lifting pump o fig. 7
0 510 525 323
7000 16 R CONE 1/8 Lifting pump 0 510 625 016 fig. 6
0 510 525 344

7700 11 L CONE 1/8 Lifting pump fig. 6
(Identical pump inlets)
Fig.7
www.symko.fr
1 . Hydraulic pumps
CASE IH TRACTORS
NOTE
Hydraulic
137
235
Fig.1
323 8 R CONE 1/5 Lifting 0 510 415 007 fig. 1
339
439
Mechanical
353
383 Lifting 0 510 415 311
8
423 fig. 2
433
453
Fig.2
523
533
553
8+8 Lifting & Sterring 0 510 465 349
624 fig. 3
2 rear outputs (replace 0 510 465 322
633
with his rear shiel)
644
L CONE 1/5
Fig.3 654
electric
724
734
8+8 0 510 465 353
743 Lifting & Sterring fig. 4
(ex 0 510 465 315)
744 ressure limiter
745
824
834
Fig.4 844
845 Lifting & Sterring 0 510 565 394 fig. 4
11 + 8 pressure limiter (ex 0 510 565 314)
856
946
Lifting & Sterring 0 510 565 394
1046 11 + 8 R CONE 1/5 fig. 4
pressure limiter (ex 0 510 565 314)
diesel
1246
Previous versions
955
Fig.5
1055 Lifting & Sterring
11 + 8 R CONE 1/5 0 510 565 395 fig. 5
956XL with valve
1056XL
Latest versions
955 Lifting & Sterring
0 510 565 396
1055
Services
1055XL 11 + 8 L CONE 1/5 fig. 3
Fig.6 956XL Lifting & Sterring
0 510 565 365
1056XL 2 way in / 2 way out
Without Sens-O-Draulic
743XL
745XL Lifting & Sterring
8+8 L CONE 1/5 0 510 465 340 fig. 3
844XL 1 rear outputs
Fig.7 845XL
With Sens-O-Draulic
745XL
appendices
Lifting & Sterring

845XL 8+8 L CONE 1/5 0 510 465 339 fig. 6
with flow regulator
856XL
Lifting & Sterring 0 510 900 015
11+ 4
Fig.8 956XLA (ex 0 510 565 315)
L CONE 1/5 N/A
1056XLA Lifting & Sterring
11+8
2 way in / 2 way out 0 510 565 365
1255XL CONE 1/5
14 + 11 L Lifting & Sterring 0 510 555 306 fig. 7
1455XL counter-bearing
CS50
CS75 14 L CONE 1/5 Lifting 0 510 515 316 fig. 2
CS 78
www.symko.fr
1 . Hydraulic pumps
CASE IH TRACTORS
NOTE

Fig.1
Motor MWM
CS 78
CS 86 0 510 665 382
16 + 11 L CONE 1/5 Lifting & Sterring fig. 1
CS 88 (ex 0 510 665 335)
CS 94
Motor SISU
Fig.2 CS 78
CS 86 Splined shaft
22.5 + 16 L Lifting & Sterring 0 510 765 351 fig. 4
CS 88 9 tooth gear drive
CS 94
CS 100
CS 110 32 Lifting 0 510 725 089 fig. 5
Splined shaft
CS 120 R
13 tooth gear drive
CS 130 32 + 16 Lifting & Sterring 0 510 768 023 N/A
Fig.3 CS 150
CX 50
CX 60
CX 70 0 510 665 382
CX 80 (ex 0 510 665 335)
CX 90
CX 100
Fig.4 3210
3220
3230
3240 0 510 665 382
4210 (ex 0 510 665 335)
4220
4230
4240
Fig.5 8 L 0 510 425 315
2120
Assembly SAUER
2130 Splined shaft
17 R Simple SNP2/17DSC01 fig. 6
2140 9 tooth gear drive
2150
Assembly SAUER
25 R SHP2/25DSC01
Fig.6 Serie JX 14 L Sterring 0 510 525 359 fig. 2
CONE 1/8
JXU90U 25 R Lifting 0 510 725 085 N/A
DAVID BROWN TRACTORS

NOTE

1200 11 L CONE 1/8 Lifting 0 510 525 313 fig. 7

Fig.7 1210 11 0 510 525 313
1212
L CONE 1/8 Lifting fig. 7
1410
1412 16 0 510 625 318
11 0 510 525 313
19 0 510 625 319
1394
1490 16 0 510 625 318
1494
1594
1690 19 0 510 625 319
1694
www.symko.fr
1 . Hydraulic pumps
DEUTZ TRACTORS
NOTE
Hydraulic
D30
Fig.1
D30S CONE 1/5
8 R Lifting 0 510 445 001 fig. 1
D50 counter-bearing
D55
CONE 1/5
D40S 16 R Lifting 0 510 645 004 fig. 1
Mechanical
counter-bearing
D2506
D3006 11 0 510 515 323
D4006
Fig.2
D4506 L CONE 1/5 Lifting fig. 2
D5006
D5206 14 0 510 515 316
D5506
D6006 11 0 510 515 323

D6206
D6806 14 L CONE 1/5 Lifting 0 510 515 316 fig. 2
Fig.3 D7006
electric
D7206 16 0 510 615 326
D8006 16 Lifting 0 510 615 326 fig. 2

D13006 16 + 11 Lifting & Sterring 0 510 665 382 fig. 3
D2807
14 L CONE 1/5 Lifting 0 510 515 316 fig. 2
D3607
Fig.4 D4007
D4507 14 0 510 515 316
D4807 L CONE 1/5 Lifting fig. 2
D5207 16 0 510 615 326
D6007
diesel
D6207 16 0 510 615 326
D6507 19 0 510 615 338
D6807
16 + 11 Lifting & Sterring 0 510 665 382 fig. 3
D7007
D7207
14 Lifting 0 510 515 316 fig. 2
D7807
D4507C
D4807C
Services
D5207C
D6007C 16 L CONE 1/5 Lifting 0 510 615 326 fig. 2
D7007C
D7207C
D7807C
D6207C
D6507C 19 L CONE 1/5 Lifting 0 510 615 338 fig. 2
D6907C
16 Lifting 0 510 615 326 fig. 2
D6807C L CONE 1/5
appendices
DX80 16 + 11 L CONE 1/5 Lifting 0 510 665 382 fig. 3

DX85
19 CONE 1/5 Lifting 0 510 615 338 fig. 2
DX90
16 + 11 L CONE 1/5 Lifting 0 510 665 382 fig. 3
DX110
22.5 + 16 9 tooth gear drive Lifting & Sterring 0 510 765 337 fig. 4
DX120
www.symko.fr
1 . Hydraulic pumps
DEUTZ TRACTORS
NOTE

Fig.1 DX86 16 + 11 0 510 665 382

L CONE 1/5 Lifting & Sterring fig. 2
DX92 19 + 11 0 510 665 368
16 R Screwdriver 0 510 615 007 fig. 4
19 R Screwdriver 0 510 615 008 fig. 4
DX140 Lifting
19 L CONE 1/5 0 510 615 338 fig. 1
22.5 L 9 tooth gear drive 0 510 715 313 N/A
DX145 22.5 + 16 L 9 tooth gear drive Lifting & Sterring 0 510 765 337 fig. 6
Fig.2 DX160 19 L CONE 1/5 Lifting 0 510 615 338 fig. 1
DX36V
11 0 510 515 323
DX50 L CONE 1/5 Lifting fig. 1
14 0 510 515 316
DX55
DX3.10V
16 Lifting 0 510 615 326 fig. 1
DX3.30VF L CONE 1/5
DX3.50VFS
Fig.3
16 Lifting 0 510 615 326 fig. 1
DX3.70VF 11 + 8 L CONE 1/5 Lifting & Sterring 0 510 565 324 fig. 5
16 Lifting 0 510 615 326 fig. 1
DX3.90FS L CONE 1/5
16 0 510 615 326
DX3.10VC L CONE 1/5 Lifting fig. 1
14 0 510 515 316
Fig.4 DX3.30VC 19 0 510 615 338
DX3.50VC 14 0 510 515 316
DX3.60VC
19 Lifting 0 510 615 338 fig. 1
DX3.65VC
DX3.70VC
DX3.90VC
Fig.5
DX3.10SC 16 L CONE 1/5 Lifting 0 510 615 326 fig. 1
DX3.30SC
DX3.50SC
DX3.60SC
DX3.65SC 19 Lifting 0 510 615 338 fig. 1
Fig.6 L CONE 1/5
DX3.70SC 16 + 11 Lifting & Sterring 0 510 665 382 fig. 2
DX3.90SC
DX3.80SC 19 L CONE 1/5 Lifting 0 510 615 338 fig. 1
INTRAC2002 16 L CONE 1/5 Lifting 0 510 615 326 fig. 1
16 0 510 615 326
INTRAC2003 L CONE 1/5 Lifting fig. 1
19 0 510 615 338
19 Lifting 0 510 615 338 fig. 1
INTRAC2004 L CONE 1/5
INTRAC6.05 22.5 + 16 L 9 tooth gear drive Lifting & Sterring 0 510 765 337 fig. 3
INTRAC6.30 22.5 + 16 Lifting & Sterring 0 510 765 337 fig. 6
L 9 tooth gear drive
INTRAC6.60 14 + 8 + 16 Triple 0 510 565 382 N/A
www.symko.fr
1 . Hydraulic pumps
DEUTZ TRACTORS
NOTE
Hydraulic
DX4.10
Fig.1
DX4.30 16 + 11 L CONE 1/5 Lifting & Sterring 0 510 665 382 fig. 2
DX4.31
DX4.50
16 + 11 0 510 665 382
DX4.51 L CONE 1/5 Lifting & Sterring fig. 2
19 + 11 0 510 665 368
Mechanical
DX4.70
Fig.2 DX6.10
22.5 + 16 9 tooth gear drive 0 510 765 337 fig. 3
DX6.30 L Lifting & Sterring
16 + 14 CONE 1/5 0 510 665 381 fig. 2
DX6.50
14 CONE 1/5 0 510 515 316 fig. 1

DX7.10 L Lifting
22.5 9 tooth gear drive 0 510 715 313 N/A
AGROSTAR
4.61
4.71
electric
19 + 11 L CONE 1/5 Lifting & Sterring 0 510 665 368 fig. 2
Fig.3 4.68
4.78
6.11
22.5 + 16 Lifting & Sterring 0 510 765 337 fig. 3
6.31 L 9 tooth gear drive
14 + 8 +16 Triple 0 510 565 382 N/A
6.61
6.08
6.28
22.5 + 16 L 9 tooth gear drive Lifting & Sterring 0 510 765 337 fig. 3
6.38
6.61
HOPFEN
19 Lifting 0 510 615 338 fig. 1
diesel
4.17A L CONE 1/5
16 + 11 0 510 665 382
4.57A L CONE 1/5 Lifting & Sterring fig. 2
19 + 11 0 510 665 368
AGROXTRA
19 Lifting 0 510 615 338 fig. 1
DX4.17 L CONE 1/5
DX4.57 16 + 11 0 510 665 382
L CONE 1/5 Lifting & Sterring fig. 2
DX6.07 19 + 11 0 510 665 368
4.07
4.17 L CONE 1/5
Services
19 Lifting 0 510 615 338 fig. 2
4.17H
4.47
4.57
4.57H
6.07
6.17 22.5 + 16 L 9 tooth gear drive Lifting & Sterring 0 510 765 337 fig. 3
AGROPRIMA
4.31 16 + 11 L CONE 1/5 Lifting & Sterring 0 510 665 382 fig. 2
4.51
appendices
4.56 19 + 11 L CONE 1/5 Lifting & Sterring 0 510 665 368 fig. 2
6.06
6.16 22.5 + 16 L 9 tooth gear drive Lifting & Sterring 0 510 765 337 fig. 3
www.symko.fr
1 . Hydraulic pumps
DEUTZ TRACTORS
NOTE

tracteur (cm3/tr) L R shaft
Fig.1 AGROCOMPACT
3.30V
3.50V
3.70V 14 + 8 0 510 565 335
3.30F
N/A
3.50F L CONE 1/5 Lifting & Sterring
fig. 1
3.70F
3.90F 16 + 11 0 510 665 382
Fig.2 3.50S
3.90S
AGROPLUS
60
14 L 0 510 515 338
70
19 L 9 tooth gear drive Lifting 0 510 615 353 fig. 2
80
22.5 R 0 510 715 008
100
Fig.3 AGROTRON mk1
4.70
4.80
4.85
4.90 Gearboxes lubrification with
4.95 pressure controller
19 L CONE 1/5 0 510 615 351 fig. 3
6.00
28 L CONE 1/5 0 510 725 392 N/A
6.01 Flow controller and limiter
32 R 13 tooth gear drive 0 510 725 093 N/A
Fig.4 6.05
6.15 Flow controller and limiter
6.20
6.30
6.45
AGROTRON mk2
80
85
90
100
Lifting
105
106
110
25 L CONE 1/5 0 510 715 319
115
28 L CONE 1/5 0 510 725 392 N/A
120
32 R 13 tooth gear drive Flow controller and limiter 0 510 725 093
135
150
160
175
Flow controller and limiter
200
230
260
AGROTRON mk3
80
85
90
100
105
106 Lifting fig. 4
110
115 32 R 13 tooth gear drive 0 510 725 089
120 32 + 14 L CONE 1/5 0 510 768 315
135
150 Lifting & Sterring N/A
160
175
200
230
260
www.symko.fr
1 . Hydraulic pumps
FENDT TRACTORS
NOTE
Hydraulic
FARMER
14 0 510 515 316
Fig.1
16 0 510 615 333
100 L CONE 1/5 Lifting fig. 2
16 0 510 615 326
19 0 510 615 318
Mechanical
200V 11 + 8 L CONE 1/5 Lifting & Sterring 0 510 565 363 N/A
0 510 615 326

Fig.2 16 Lifting fig. 2
200S L CONE 1/5 0 510 665 382
16 + 11 Lifting & Sterring fig. 4
( ex 0 510 665 335)
300
0 510 665 381
(moteur 16 + 14 L CONE 1/5 Lifting & Sterring fig. 4
( ex 0 510 665 341)
MWM)
0 510 665 424

300C
electric
Triple or
(moteur 16 + 14 +8 L CONE 1/5 N/A
Fig.3 with flow regulator 0 517 665 302
Deutz)
(Silence Plus version)
FAVORIT
0 510 615 333
16
(Viton seal)
500 L CONE 1/5 Sterring fig. 2
0 510 615 326
16
(Nitrile seal)
Fig.4 Sterring
19 0 510 615 332 fig. 1
CONE 1/5 with flow regulator
diesel
CONE 1/5 Lifting
11 0 510 515 309 fig. 2
9 tooth gear drive Lifting
16 0 510 625 317 fig. 3
600 L 9 tooth gear drive Lifting
19 0 510 625 316 fig. 3
9 tooth gear drive Lifting
22.5 0 510 725 349 fig. 3
Fig.5 9 tooth gear drive Lifting & Sterring
19 + 11 0 510 665 375 fig. 6
9 tooth gear drive Lifting & Sterring
19 + 11 + 2 0 510 666 303 fig. 7
with greasing
22.5 + 14 9 tooth gear drive 0 510 765 315 fig. 5
600LSA L Lifting & Sterring
19 + 11 CONE 1/5 0 510 665 368 fig. 4
Services
800 14 0 510 515 343
L Screwdriver Booster pump & transmission fig. 8
900 16 0 510 625 364
Fig.6 GT
250
0 510 615 333
275 16
(Viton seal)
345 L CONE 1/5 Sterring fig. 2
0 510 615 326
350 16
(Nitrile seal)
360
Fig.7
365
0 510 665 382
370 16 + 11 L CONE 1/5 Lifting & Sterring fig. 4
appendices
(ex 0 510 665 335)

380
390 Triple
16 + 11 + 14 L CONE 1/5 0 510 665 396 N/A
395 with flow regulator
XYLON
0 510 615 333
Fig.8 16
524 (Viton seal)
L CONE 1/5 Simple fig. 2
526 0 510 615 326
16
(Nitrile seal)
www.symko.fr
1 . Hydraulic pumps
FIAT / FORD / NEW HOLLAND TRACTORS
NOTE

8 L Sterring 0 510 425 309 (A18X)

446 CONE 1/8 fig. 1
Fig.1 11 R Lifting 0 510 525 046 (C25X)
8 R Sterring 0 510 425 032 (C18X)
466 14 L CONE 1/8 Lifting 0 510 525 348 (A31X) fig. 1
16 L Lifting 0 510 625 318
8 R Sterring 0 510 425 032 (C18X)
566
11 R Sterring 0 510 525 046 (C25X)
666 CONE 1/8 fig. 1
14 L Lifting 0 510 525 348 (A31X)
766
16 L Lifting 0 510 625 318
45.66
55.56
55.66
55.66LP
80.66
11 R Sterring 0 510 525 046 (C25X)
60.56
14 L CONE 1/8 Lifting 0 510 525 348 (A31X) fig. 1
70.56
16 L Lifting 0 510 625 318
45.76V
55.76VFDT
60.76VFDT
70.76VFLPDT
80.76FFDT
8 R Sterring 0 510 425 032 (C18X)

55.66V/F 14 L CONE 1/8 Lifting 0 510 525 348 (A31X) fig. 1
16 L Lifting 0 510 625 318
11 R Sterring 0 510 525 046 (C25X)

14 L Lifting 0 510 525 348 (A31X)
60.66 CONE 1/8 fig. 1
16 L Lifting 0 510 625 318
11 L Lifting 0 510 525 357 (A25X)
8 R Sterring 0 510 425 032 (C18X)
11 R Sterring 0 510 525 046 (C25X)
60.66LP/F CONE 1/8 fig. 1
14 L Lifting 0 510 525 348 (A31X)
16 L Lifting 0 510 625 318
11 R Sterring 0 510 525 046 (C25X)
65.66
70.66
16 L Lifting 0 510 625 318
8 L Sterring 0 510 425 309 (A18X)
70.66LP/F 11 R Sterring 0 510 525 046 (C25X)
CONE 1/8 fig. 1
80.66F 14 L Lifting 0 510 525 348 (A31X)
16 L Lifting 0 510 625 318
55.46
11 L Lifting 0 510 525 357 (A25X)
65.46 CONE 1/8 fig. 1
11 R Sterring 0 510 525 046 (C25X)
60.56
www.symko.fr
1 . Hydraulic pumps
NOTE
Hydraulic
50.86VVDT
Fig.1 11 R 0 510 525 046 (C25X)
55.86VFDT
14 L Sterring 0 510 525 348 (A31X)
60.86FDT
Lifting ArgoPower
62.86FDT CONE 1/8 fig. 1
16 L Lifting ArgoPower 0 510 625 318
70.86FDT
Lifting Standard
Mechanical
72.86LPFDT
19 L 0 510 625 362 (A42X)
82.86LPFDT
480 11 R CONE 1/8 Sterring 0 510 525 046 (C25X) fig. 1

Fig.2
480S 11 R 0 510 525 046 (C25X)
CONE 1/8 Sterring fig. 1
480/8 8 L 0 510 425 309 (A18X)
580 8 R Sterring 0 510 425 032 (C18X)

680 11 L Lifting C 0 510 525 357 (A25X)
CONE 1/8 fig. 1
780 14 L Lifting D 0 510 525 348 (A31X)
880 16 L Lifting D 0 510 625 318
Fig.3
11 R Sterring 0 510 525 046 (C25X)
electric
880/5
980
16 L Lifting 0 510 625 318
5.5 L CYL 17.4 PDF 0 510 325 316 (A14X)

fig. 3 fig. 2
1180 11 R CONE 1/8 Sterring 0 510 525 060 (C25XRP)
fig. 1
1280 14 L CONE 1/8 Lifting 0 510 525 348 (A31X)
fig. 1
16 L CONE 1/8 Lifting 0 510 625 318
1380
5.5 L CYL 17.4 PDF 0 510 325 316 (A14X)
1580 fig. 3 fig. 2
11 R CONE 1/8 Sterring 0 510 525 060 (C25XRP)
1580T fig. 1
19 L CONE 1/8 Lifting 0 510 625 362 (A42X)
1880
diesel
SOM 25
8 R CONE 1/8 Lifting 0 510 425 032 (C18X) fig. 1
SOM 35
SOM 30 B 8 L CONE 1/8 Lifting 0 510 425 309 (A18X) fig. 1

SOM 55 11 L CONE 1/8 Lifting 0 510 525 357 (A25X) fig. 1
250
440
300
420
8 L Lifting 0 510 425 309 (A18X)
350 CONE 1/8 fig. 1
8 R Sterring 0 510 425 032 (C18X)
Services
440
440V
450
540
500S 11 R Lifting 0 510 525 046 (C25X)
CONE 1/8 fig. 1
540S 8 L Sterring 0 510 425 309 (A18X)
8 R 0 510 425 032 (C18X)

appendices
11 L Sterring 0 510 525 357 (A25X)

640 CONE 1/8 fig. 1
14 L Lifting C Lifting D Lifting D 0 510 525 348 (A31X)
16 L 0 510 625 318
www.symko.fr
1 . Hydraulic pumps
NOTE

11 L Lifting 0 510 525 357 (A25X)

750 CONE 1/8 fig. 1
Fig.1 8 R Sterring 0 510 425 032 (C18X)
800 8 R CONE 1/8 Lifting 0 510 425 032 (C18X) fig. 1
8 R Sterring 0 510 425 032 (C18X) fig. 1

850
1000S
16 L Lifting 0 510 625 318 fig. 1
14 0 510 525 348 (A31X)
850S L CONE 1/8 Lifting fig. 1
16 0 510 625 318
Fig.2
8 R Sterring 0 510 425 032 (C18X)

600 and DT CONE 1/8 fig. 1
11 L Lifting 0 510 525 357 (A25X)
1000
8 R CONE 1/8 Sterring 0 510 425 032 (C18X) fig. 1
1300
22 L GROUPE 3 Lifting A43XP N/A
1300S
315
470
415 8 R CONE 1/8 Lifting 0 510 425 032 (C18X) fig. 1
470SP
470S 11 L CONE 1/8 Lifting 0 510 525 357 (A25X) fig. 1
615
474
8 R Sterring 0 510 425 032 (C18X)
570 CONE 1/8 fig. 1
11 L Lifting 0 510 525 357 (A25X)
670
11 R Sterring 0 510 525 046 (C25X)

570/VF
8 R CONE 1/8 Sterring 0 510 425 032 (C18X) fig. 1
670F
11 L Lifting 0 510 525 357 (A25X)
55.90
11 R Sterring 2RM 0 510 525 060 (C25XRP) fig. 2
60.90
65.90
16 L Lifting 0 510 625 318 fig. 1
70.90
11 R Sterring 1 cylinder 0 510 525 060 (C25XRP) fig. 2

14 R Sterring 2 cylinders 0 510 525 059 (C31XRP) fig. 2
80.90 CONE 1/8
14 L Lifting 0 510 525 348 (A31X) fig. 1
16 L Lifting 0 510 625 318 fig. 1
11 R Sterring 2RM 0 510 525 060 (C25XRP) fig. 2

14 R Sterring 0 510 525 059 (C31XRP) fig. 2
85.90
115.90
16 L Lifting 0 510 625 318 fig. 1
19 L Lifting 0 510 625 362 (A42X) fig. 1
www.symko.fr
1 . Hydraulic pumps
NOTE
Hydraulic
11 R Sterring 1 cylinder 0 510 525 060 (C25XRP) fig. 2
Fig.1 90.90 14 R Sterring 2 cylinders 0 510 525 059 (C31XRP) fig. 2

CONE 1/8
100.90 14 L Lifting 0 510 525 348 (A31X) fig. 1
16 L Lifting 0 510 625 318 fig. 1
110.90 CONE 1/8
Mechanical
19 L Lifting 0 510 625 362 (A42X) fig. 1
11 R CONE 1/8 Sterring 2RM 0 510 525 060 (C25XRP) fig. 2
130.90 14 R CONE 1/8 Sterring 0 510 525 059 (C31XRP) fig. 2
140.90 14 L CONE 1/8 Lifting 0 510 525 348 (A31X) fig. 1
Fig.2 160.90 16 L CONE 1/8 Lifting 0 510 625 318 fig. 1
180.90 19 L CONE 1/8 Lifting 0 510 625 362 (A42X) fig. 1
5.5 L CYL 17.4 PDF 0 510 325 316 (A14X) fig. 3
60.93
60.94 2RM
65.93 11 R Sterring 0 510 525 046 (C25X)
65.94 2RM 14 L CONE 1/8 Sterring 0 510 525 348 (A31X) fig. 1
Fig.3 72.93 2RM 16 L Lifting 0 510 625 318
electric
72.93 4RM
82.93 2RM

60.94 DT
14 L CONE 1/8 Sterring 0 510 525 348 (A31X) fig. 1
65.94 4RM
16 L Lifting 0 510 625 318 fig. 1
72.94 2RM
82.94 2RM CONE 1/8
19 L Lifting 0 510 625 362 (A42X) fig. 1
88.94 2RM
72.94 4RM
diesel
82.94 4RM 14 R Sterring 2 cylinders 0 510 525 359 (A31XRP2) fig. 2
CONE 1/8
88.93 19 L Lifting 0 510 625 362 (A42X) fig. 1
88.94
11 Sterring 0 510 525 046 (C25X)

82.93 4RM R CONE 1/8 fig. 1
19 Lifting 0 510 625 362 (A42X)
F100
F110
14 R Sterring 0 510 525 359 (A31XRP2) fig. 2
F115 CONE 1/8
19 L Lifting 0 510 625 063 (C42X) fig. 1
Services
F120
F130
F130 New
22.5 L CONE 1/8 Sterring 0 510 725 384 N/A
Winner
19 L Sterring 0 510 625 366 (C42XRP2) fig. 2

F140 CONE 1/8
19 R Lifting 0 510 625 063 (C42X) fig. 1
Serie 35
14 L Sterring 0 510 525 360 fig. 2
Serie L CONE 1/8
appendices
25 R Lifting 0 510 725 085 fig. 1

Serie TL
www.symko.fr
1 . Hydraulic pumps
HOLDER TRACTORS
NOTE

A50
Fig.1
A55
A60 16 L CONE 1/5 Lifting 0 510 625 315 fig. 1
A65
L95
AG35 8 L CONE 1/5 Lifting 0 510 425 307 fig. 1
Fig.2 A30
T60
HURLIMANN TRACTORS
NOTE

8 9 tooth gear drive Sterring 0 510 415 328 fig. 4

H356 L
Fig.3 11 CONE 1/8 Lifting 0 510 525 313 fig. 5
8 9 tooth gear drive Sterring 0 510 415 328 fig. 4
H466 L
11 CONE 1/8 Lifting 0 510 525 313 fig. 5
H468 8 L Sterring 0 510 415 328
H478 16 R 9 tooth gear drive Lifting 0 510 615 023 fig. 4
H488 16 R Lifting 0 510 615 038
H360
11 CONE 1/5 Sterring 0 510 525 311 fig. 3
H470 L
11 CONE 1/8 Lifting 0 510 525 313 fig. 5
Fig.4 H480
H490 11 L CONE 1/5 Sterring 0 510 525 311 fig. 3
11 R Sterring 0 510 525 024

H496 9 tooth gear drive fig. 8
22.5 L Lifting 0 510 725 348
11 Sterring 0 510 525 311

H5110 L CONE 1/5 fig. 3
16 Lifting 0 510 625 315
H5116
Fig.5 H6136 22.5 L 9 tooth gear drive Lifting 0 510 725 348 fig. 8
H6170
19 9 tooth gear drive 0 510 625 332 fig. 8
H6160 L Lifting
22.5 CONE 1/8 0 510 725 331 fig. 5
JOHN DEERE TRACTORS

NOTE

Fig.6
5.10
6.10
9.10
8.20
9.20
10.20
Fig.7 7.30
9.30
2345 16+16 L CONE 1/5 Lifting & Sterring 0 510 665 330 fig. 6
3100
3200
22,5+11 L CONE 1/5 Lifting & Sterring 0 510 765 347 N/A
Fig.8 3300
3400
www.symko.fr
1 . Hydraulic pumps
LAMBORGHINI TRACTORS
NOTE
Hydraulic
A183
R235
Fig.1
503 8 R CONE 1/5 Lifting 0 510 425 009 fig. 1
603
704
Mechanical
R704
11 R CONE 1/5 Lifting 0 510 525 009 fig. 1
R904
R854
11 L CONE 1/5 Sterring 0 510 525 311 fig. 1
R955
Fig.2
A182
A184
470
583
653 11 CONE 1/8 Sterring 0 510 525 313 fig. 2
L
683 11 9 tooth gear drive Lifting 0 510 525 331 fig. 3
Fig.3 754 16 CONE 1/8 Lifting 0 510 625 318 fig. 2
electric
784
854
904
955
8 L Sterring 0 510 415 328

674 8 L 9 tooth gear drive Sterring 0 510 415 337 fig. 3
Fig.4
14 R Lifting 0 510 515 013
8 L Sterring 0 510 415 328

774 8 L Sterring 0 510 415 337
9 tooth gear drive fig. 3
874 16 R Lifting 0 510 615 038
16 R Lifting 0 510 615 023
diesel
1056
1156 16 0 510 625 327
L 9 tooth gear drive Lifting fig. 4
1356 19 0 510 625 332
1556
956
1106
1306
1506 22.5 L 9 tooth gear drive Lifting 0 510 725 348 fig. 4
1706 11 R 9 tooth gear drive Sterring 0 510 525 024 fig. 4
Services
1256
1356
6056
Formula
105 16 0 510 615 038

115 16 R 9 tooth gear drive Lifting 0 510 615 023 fig. 3
135 22.5 0 510 715 008
Racine
150
appendices
165
22.5 R 9 tooth gear drive Lifting 0 510 725 076 fig. 3
190
850
950 16 0 510 615 038

1050 16 R 9 tooth gear drive Lifting 0 510 615 023 fig. 3
1060 22.5 0 510 715 008
660 V 8 L 9 tooth gear drive Simple 0 510 425 315 fig. 4

775 Fruitier 14 R 9 tooth gear drive Lifting 0 510 525 034 fig. 4
www.symko.fr
1 . Hydraulic pumps
LANDINI TRACTORS
NOTE

Fig.1 Serie 500

5500
6500
7500
8500
9500
Lifting or Sterring
Serie 30
5530 11 L 0 510 525 344
Fig.2 6030 (Identical pump inlets)
6530
6830
7530 fig. 1
CONE 1/8
7830 Lifting
8530 11 R
0 510 525 042
8830 (Identical pump inlets)
Serie 40
5840
6040
6840 Lifting
Serie 50 16 R (ex 0 510 525 042 0 510 625 016 BS
6550 for more flow + suction flange
to order)
7550
8550
Serie 60
5560
5860 Lifting or Sterring
0 510 525 344
6060 11 L fig. 1
6560
6860 Lifting
0 510 525 339
7560 11 L fig. 2
7860
8560 Lifting
0 510 525 342
8860 14 L fig. 2
9060
70 CONE 1/8
Lifting
5870 11 R 0 510 525 042 fig. 1
6070 (Identical pump inlets)
6870
Lifting
7870 11 R 0 510 525 037 fig. 2
8870
Serie 80
Lifting
6880 14 R 0 510 525 048 fig. 2
7880
Lifting
8880
(ex 0 510 525 042
9080 16 R for more flow + suction flange fig. 1
0 510 625 016 BS
9880 to order)
Blizzard
50
60 11 L 0 510 525 339
65 14 L 0 510 525 342
CONE 1/8 Lifting fig. 2
75 11 R 0 510 525 037
85 14 R 0 510 525 048
95
www.symko.fr
1 . Hydraulic pumps
LANDINI TRACTORS
NOTE
Hydraulic
Ghibli
80
Fig.1
90 8 + 11 L CONE 1/8 Lifting & Sterring 0 510 465 364 N/A
100
Mythos
Mechanical
90
110
Large
10000
Fig.2 4 Differential lock 0 510 225 307 fig. 1
12500
22.5 L CONE 1/8 Lifting 0 510 725 365 fig.2
13000
28 Lifting 0 510 725 333 fig. 2
14500
Lgend
105
115
Fig.3 130 28 + 16 R 13 tooth gear drive Lifting & Sterring 0 510 767 032 fig.3
electric
145
165
Legend NG TDI
140
36 + 16 R 13 tooth gear drive Lifting & Sterring 0 510 769 018 N/A
160
Atlas
70
75
85
90
diesel
Vision
90
110
MC CORMICK TRACTORS
NOTE

Services
F70
Fig.4 F70GE
F70L
F70XL
F80
F80GE
appendices
F80XL 10 + 7 L CONE 1/8 Double 0 510 465 342 fig.4

F90
F90
F100
F100GE
F100L
F100XL
GX40
GX40H
GX45 11 L 9 tooth gear drive Simple 0 510 525 315 N/A
GX50
GX50H
www.symko.fr
1 . Hydraulic pumps
MASSEY FERGUSSON TRACTORS
NOTE

134
Fig.1
154
164T
174
184
194
233
Fig.2 234
253
254
263
264
0 510 525 344
273
11 L Lifting or Sterring (Identical pump inlets)
274 CONE 1/8 fig. 1
Fig.3 11 R Lifting 0 510 525 042
283
(Identical pump inlets)
284
293
294
333
353
363
373
377
383
387
393
397
174 F
184 F Sterring
8 fig. 1
194 F
362 0 510 425 309
372N Lifting and accessory
10 + 8 N/A
374 F 0 510 465 360
374S
382 L CONE 1/8 Lifting and accessory 0 510 465 342
10 + 7 fig. 3
384S
394S 0 510 465 343
365 Lifting and accessory (Valve cold start)
10 + 7 fig. 3
375
390 0 510 465 356
390T Lifting and accessory
10 + 7 fig. 3
398
www.symko.fr
1 . Hydraulic pumps
MASSEY FERGUSSON TRACTORS
NOTE
Hydraulic
Fig.1 154V
154 F 0 510 525 037
11 R Lifting fig. 4
164V 0 510 525 339
11 L Lifting fig. 4
164 F 0 510 425 309
8 L Sterring fig. 3
374 V CONE 1/8 0 510 465 342
10 + 7 L Lifting and accessory N/A
Mechanical
354VSF 0 510 465 343
10 + 7 L Lifting and accessory fig. 7
364VSF (Valve cold start)
10 + 7 L Lifting and accessory N/A
374VSF 0 510 465 356
Fig.2 384VSF
1102
1132
0 510 525 344
1114 11 Sterring fig. 3
L CONE 1/8 (Identical pump inlets)
1134 28 Lifting N/A
0 510 725 333
4225
4235
Fig.3 4240
electric
4245
4255 14 + 10 R 11 tooth gear drive Double 0 510 565 088 fig. 8
4260
4265
4270
4300
Serie 2600
Fig.4 Serie 2700 Ref of origin
Serie 2800 20 + 8 L Lifting 3790722MP N/A
Serie 3600 ex 303 87 30 M2
Serie 8100
3050
diesel
3060
3065
3070
Fig.5 3075
3080
3085
3090
3095
3115
3120 19 + 11 L CONE 1/5 Lifting & Sterring 0 510 665 389 fig. 1
Services
Fig.6 3125
3140
6110
6120
6130
6150
6160
6170
Fig.7
6180
6190
appendices
6400 TFLS 19 + 14 L CONE 1/5 Lifting & Sterring 0 510 665 440 fig. 1
Fig.8
www.symko.fr
1 . Hydraulic pumps
RENAULT CLAAS TRACTORS
NOTE

Fig.1 681 / 681 S

681 4 / 681 4S
751 S / 751 4S
751 / 751 4
752 / 752 4
782 4 / 782
781 / 781 S
781 4 / 781 4S
851 / 851 S 14 + 8 L CONE 1/5 Lifting & Sterring 0 510 565 323 fig. 1
Fig.2 851 4 / 851 4S
891 S / 891 4
891 4S
951/ 951 4/ 981
981 S/981 4
981 4S
1151 4 / 1181 4 /
1181 4S
58 12LS/58 14LS
65 12LS/65 14LS
75 12LS/75 14LS
85 12LS/85 14LS
61 12 RS-RA
61 14 RS-RA
68 12 RS-RA
68 14 RS-RA
75 12 RS-RA
CONE 1/5
75 14 RS-RA
14 + 8 R centring Ø80 Lifting & Sterring 0 510 565 038 fig. 2
77 12TS/77 14TS
75 12TS/75 14TS
85 12TS/85 14TS
80 12TX/80 14TX
80 12TX/80 14TX
85 12TX/85 14TX
MX-ME-MA-MS
58 32 / 58 3465
32 / 65 34
75 32 / 75 34 R CONE 1/5
16 + 11 0 510 665 093
TRACFOR L centring Ø80 Lifting & Sterring fig. 2
19 + 11 0 510 665 417
85 32 / 85 34
90 32 / 90 34
90 34 TRACFOR
TX
75 32 / 75 34
16 + 11 R CONE 1/5 0 510 665 093
85 32 / 85 34 Lifting & Sterring fig. 2
19 + 11 L centring Ø80 0 510 665 417
90 32 / 90 34
FT
CONE 1/5
90 34 FTZ 19 + 11 L centring Ø80 Lifting & Sterring 0 510 665 417 fig. 2
TS-TX-TA-TE-ME-RE
95 12 / 95 14 RSRE-RX-
TS-TX
103 12 / 103 14
RS-RE-RX-TSTX CONE 1/5
106 14 SP 14 + 8 R centring Ø80 Lifting & Sterring 0 510 565 038 fig. 2
113 12
113 14 TS-TXRE
110 14 / 120 14
133 14 / 145 14
www.symko.fr
1 . Hydraulic pumps
NOTE
Hydraulic
Fig.1 TS-TX-TA-TE-ME-RE
103 52
103 54 TS-TX-TA-TE CONE 1/5
16 + 11 R Lifting & Sterring 0 510 665 093 fig. 1
106 54 TRACFOR centring Ø80
106 54 TL
Mechanical
Mecanic
103 54 TS-TX-TA-TE
CONE 1/5
106 54 TRACFOR 16 + 11 R Lifting & Sterring 0 510 665 093 fig. 1
Fig.2 centring Ø80
106 54 TL
Tractoshift - Tractonic
103 52 TS-TX-TA-TE
CONE 1/5
103 54 TS-TX-TA-TE 19 + 11 L Lifting & Sterring 0 510 665 417 fig. 1
centring Ø80
106 54
Tractoshift - TS-TX-TZ-TE-TA
110 54
Fig.3
120 54
CONE 1/5
electric
133 54 16 + 11 R Lifting & Sterring 0 510 665 093 fig. 1
centring Ø80
145 54
155 54
Mecanic - TS-TX-TZ-TE-TA
110 54
120 54
CONE 1/5
133 54 19 + 11 L Lifting & Sterring 0 510 665 417 fig. 1
centring Ø80
145 54
155 54
700 M / 720 M
CONE 1/5
704 M / 724 M 14 + 8 R Lifting 0 510 565 038 fig. 1
Centring Ø80
diesel
800 M / 804 M
600 M / 650 MI
750 MI / 754 MI
CONE 1/5
850 MI / 854 MI 16 + 11 R Lifting & Sterring 0 510 665 093 fig. 1
centring Ø80
850 MI / 854 MI
HYDROSHIFT
DIONIS
110
120
14 L CONE 1/5 Simple 0 510 515 316 fig. 3
130
Services
140
FRUCTUS
110
120
14 L CONE 1/5 Simple 0 510 515 316 fig. 3
130
140
PALES
210
230 14 L CONE 1/5 Simple 0 510 515 316 fig. 3
240
appendices
Wine growing and Orchard

32.50 F/32.50 V 14
32.60 F/32.60 SV (Origin)
34.60 V L CONE 1/5 Lifting 0 510 625 334 fig. 2
42.70 V/42.70 F 16
44.70 F (Bosch)
50.12 V/50.12 LB
55.12 F/55.12 LB 0 510 515 316
14 L CONE 1/5 Simple fig. 3
55.14 V/55.14 LB (centered ports)
70.12LB/70.14 LB
www.symko.fr
1 . Hydraulic pumps
NOTE

Fig.1 301 / 351 M

361 / 421 M
421 / 461 / 461 M
R51 / R53 / R56 /
R86 / R88 / R89 14
60 S / 70 S / 80 S (Origin)
L CONE 1/5 Lifting 0 510 625 334 fig. 2
490 S 16
50 S / 460 S (Bosch)
Fig.2 90 S / 91 / 92 / 94
/ 96 / 98
466 S / 480 S
556 S / 656 S
94 / 421 /501 /
501 4 / 601 4
461 / 461 S
462 / 466
Fig.3 466 S /551 /551 S 0 510 565 323
551 4 / 551 4S / (ex 0 510 565 322)
556 / 556 S
651 / 651 S / 652
651 4 / 651 4S /
656 / 656 S
CERES
310 - IM
CONE 1/8
310 - IM 22.5 + 11 L Lifting & Sterring 0 510 765 347 fig. 1
Left thread
320 - IM
310-ISC-R
310-ISC-R
320/320 X-ISC- R
11 tooth gear
320-320 X-ISC- R 22 + 11 L Lifting & Sterring 0 510 765 353 N/A
drive
325/325 X-ISC- R
330/330 X-ISC- R
340/340 X-ISC- R
325 X - EM
335 X - EM
345 X - EM
355 X - EM 11 tooth gear
22 + 22 L Lifting double 0 510 765 396 N/A
325 X - EHM drive
335 X - EHM
345 X - EHM
355 X - EHM
CERES without TWINSHIFT
65 / 65
70 / 70 X CONE 1/5
16 + 11 R Lifting & Sterring 0 510 665 093 fig. 1
85 / 85 X centring Ø80
95 / 95 X
75 / 75 X
65 / 65
CONE 1/8
75 / 75 X 22.5 + 11 L Lifting & Sterring 0 510 765 347 fig. 1
Left thread
85 / 85 X
95 / 95 X
Caption
IM: Mechanical shuttle
R: Revershift
EM: Mechanical clutch
EHM: Wet clutch
www.symko.fr
1 . Hydraulic pumps
NOTE
Hydraulic
Fig.1 ERGOS Engine J.DEERE

85
CONE 1/8
95 22.5 + 11 L Lifting & Sterring 0510 765 347 fig. 2
left thread
105
ERGOS Mechanical cluth
Mechanical
90
100 22 + 11 L 11 tooth gear drive Lifting & Sterring 0 510 765 353 N/A
110
Fig.2
ERGOS Wet clutch
90
100 22 + 22 L 11 tooth gear drive Lifting double 0510 765 396 N/A
110
TEMIS
550 X - DM 22 + 11 L 11 tooth gear drive Lifting & Sterring 0 510 765 353 N/A
550 X - T 22 + 22 L 11 tooth gear drive Lifting double 0 510 765 396 N/A
electric
610 X-610 Z - T
630 X-630 Z - T 11 + 11 R 9 tooth gear drive Double 0 510 565 094 N/A
650 X-650 Z - T
610 X-610 Z
14
630 X-630 Z L CONE 1/5 Double 0 510 565 427 N/A
14
650 X-650 Z
CERGOS
330
CONE 1/8
340 22.5 + 11 L Lifting & Sterring 0 510 765 347 fig. 2
left thread
350
diesel
335-IS
345-IS 22 + 11 L 11 tooth gear drive Lifting & Sterring 0 510 765 353 N/A
355-IS
335-ISC (IH)
345-ISC (IH) 22 + 22 L 11 tooth gear drive Lifting double 0 510 765 396 N/A
3355-ISC (IH)
ARES
540RX
540-546 RX/RZ
Services
550 RX
550-556 RX/RZ
610 RX/RZ
616 RX/RZ 19 + 11 L CONE 1/5 Lifting & Sterring 0 510 665 389 fig. 1
620 RX/RZ
628 RX/RZ
630 RX/RZ
630-636 RX/RZ
640-696 RZ
Caption
appendices
DM: Mechanical splitter

T: Tractonic
IS: Synchro reverser
IH: Hydraulic reverser
www.symko.fr
1 . Hydraulic pumps
SAME TRACTORS
NOTE

Condor 55 8 0 510 425 307

Taurus 60 EXP 8 L CONE 1/5 Sterring 0 510 425 323 fig. 1
Minitaurus 60 EXP 11 0 510 525 311
Fig.1 tCentauro

70EXP 11 CONE 1/5 Sterring 0 510 525 311 fig. 1
L
70SP 11 9 tooth gear drive Sterring 0 510 525 024 fig. 2
11 9 tooth gear drive Lifting 0 510 525 329 fig. 2
Fig.2 Centurion

75EXP
11 R 9 tooth gear drive Sterring 0 510 525 024 fig. 2
75SP
19 L 9 tooth gear drive Accessory 0 510 625 332 fig. 2
Fig.3
Léopard
11 L 9 tooth gear drive Sterring 0 510 525 331 fig. 2

14 L 9 tooth gear drive Sterring 0 510 525 329 fig. 2
75C
85EXP
90
90DT
Mercury
85EXP
85SP
Jaguar L
95
95EXP
19 9 tooth gear drive Accessory 0 510 625 332 fig. 2
100
Tiger

100
six 105
19 9 tooth gear drive Accessory 0 510 625 332 fig. 2
Buffalo
130 11 L CONE 1/5 Sterring 0 510 525 311 fig. 1
Hercule
L
160 EXP 19 9 tooth gear drive Accessory 0 510 625 332 fig. 2
Trident
11 Sterring 0 510 525 331

14 Sterring 0 510 525 329
130 L 9 tooth gear drive fig. 2
14 Lifting 0 510 525 329
14 Lifting 0 510 525 355
www.symko.fr
1 . Hydraulic pumps
SAME TRACTORS
NOTE
Hydraulic
Delphino 35 5,5 Sterring 0 510 325 307

Aurora 45 8 L 9 tooth gear drive Sterring 0 510 425 308 fig. 1
Fig.1 Ranger 45 11 Lifting 0 510 525 312
Aster
60 / 70 16 R 9 tooth gear drive Lifting 0 510 625 039 fig. 3
Mechanical
Galaxy
11 R Sterring 0 510 525 024
170 9 tooth gear drive fig. 3
22.5 L Lifting 0 510 725 348
Laser
Fig.2 90 / 100 11 R Sterring 0 510 525 024
9 tooth gear drive
110 / 130 fig. 3
150 22.5 L Lifting 0 510 725 348
Explorer
8 L Sterring 0 510 415 328
55
8 L Sterring 0 510 415 337
60
11 R Lifting 0 510 515 012
65
14 R Lifting 0 510 515 013
electric
Fig.3 70 9 tooth gear drive fig. 2
14 R Lifting 0 510 515 023
75
16 R Lifting 0 510 615 023
80
16 R Lifting 0 510 615 038
90
22,5 R Lifting 0 510 715 008
Saturno
22,5 Lifting
80 0 510 725 348 fig. 3
L cône 1/8 Sterring
80SYN A15L16750 N/A
16 (Controller and limiter)
Panther
19 Accessory
88 0 510 625 332 fig. 3
L cône 1/9 Sterring
95 A15L16750 N/A
diesel
Drago
100 Sterring
16 L cône 1/10 A 15L16750 N/A
Dorado
60 14 0 510 515 338
L 9 tooth gear drive Lifting fig. 2
70 19 0 510 615 353
Frutteto
8 L Sterring 0 510 425 315
60 / 75 / 85 9 tooth gear drive fig. 3
16 R Lifting 0 510 625 039
Services
Sylver
11 R Sterring 0 510 515 012
11 L Sterring 0 510 515 347
80
16 R Lifting 0 510 615 023
90
9 tooth gear drive (viton seal) fig. 2
100.4
16 L Lifting 0 510 615 038
100.6
16 L Hybrid 0 510 615 354
22,5 R Lifting 0 510 715 008
Antarès
14 L Sterring 0 510 515 338
appendices
16 L Sterring 0 510 615 354

100
16 R Lifting 0 510 615 023
110 9 tooth gear drive fig. 2
(viton seal)
130
16 R Lifting 0 510 615 038
22,5 R Lifting 0 510 715 008
Rubin
120/135/150 16 + 11 R 9 tooth gear drive Double 0 510 665 116 N/A
Titan
14 R Sterring 0 510 525 034 fig. 3
145 19 L Gearboxes 0 510 625 332 fig. 3
160 22,5 R 9 tooth gear drive Lifting 0 510 725 076 fig. 3
190 16+11 R Double 0 510 665 116 N/A
16+11 R Double 0 510 665 122 N/A
www.symko.fr
1 . Hydraulic pumps
STEYR TRACTORS
NOTE

110
450
540
Fig.1
548
Screwdriver Lifting 0 510 415 314 fig. 2
CONE 1/5 Lifting 0 510 415 313 fig. 1

8
650
Fig.2 8
658 Screwdriver Lifting 0 510 615 321 fig. 2
16
750 short bearing
19
760 L
19
16+8
870 long bearing
16
988
19
Screwdriver Lifting & Sterring 0 510 665 378 N/A
CONE 1/5 Lifting 0 510 625 315 fig. 1

Fig.3
650H
760H CONE 1/5
16 0 510 615 314 fig. 1
768H L Lifting
16 0 510 645 300 fig. 3
870H CONE 1/5
980H counter-bearing
Fig.4
T190 8 L Screwdriver Lifting 0 510 415 314 fig. 2
Screwdriver
16 R 0 510 615 007 fig. 2
CONE 1/5
16 L 0 510 615 314 fig. 1
1090
Screwdriver
1100 16 L 0 510 615 315 fig. 2
1108
Screwdriver
1200 19 L Lifting 0 510 615 321 fig. 2
short bearing
1400
2036
Screwdriver
3875 19 L 0 510 615 337 fig. 2
long bearing
CONE 1/5
16 L 0 510 645 300 fig. 3
counter-bearing
CONE 1/5 Sterring 0 510 515 310 fig. 1

11

11
8055
8060 CONE 1/5 Lifting 0 510 615 314 fig. 1
16
8070
16
8080
8090 CONE 1/5 Lifting 0 510 645 300 fig. 3
16 L
8100 counter-bearing
8120
19
8140 short bearing
8160
19
9090 long bearing
16+8 0 510 665 378

Screwdriver Lifting & Sterring N/A
8150
16 + 16 R Screwdriver Double 0 510 665 030 N/A
8180
8055A
11 L Screwdriver Lifting 0 510 515 311 fig. 2
8060A
www.symko.fr
1 . Hydraulic pumps
STEYR TRACTORS
NOTE
Hydraulic
14 0 510 515 318

8110A L CONE 1/5 Lifting fig. 1
16 0 510 615 314
Fig.1
8050L
8055L
11 Sterring 0 510 515 310
8070L
8080L
Mechanical
16 Lifting 0 510 615 314
8100L
8120L
8140S
16 R Screwdriver Lifting 0 510 615 007 fig. 2
8160S
Fig.2
9078
9083 0 510 665 382
9086 ( ex: 0 510 665 335)
9094
9115
32 Lifting 0 510 725 089
9125 R 13 tooth gear drive N/A
Fig.3 32 + 16 Double 0 510 768 023
9145
electric
VALTRA-VALMET TRACTORS
NOTE tractors (cm3/tr) L R shaft
i SERIE
Seals kits: 65
Contact us / 100
11 + 11 L 9 tooth gear drive Double 0 510 565 416 N/A
Piston pumps, 800
900
see p36
(new) and SERIE HIGH TECH
diesel
p44 (reman)
6250
6350
6550
6650
6750
Double
6850 0 510 767 318
32 + 11 L DIN 5480 Long shaft N/A
8050 (ex 0 510 767 317)
8150
8350
8450
Services
8550
8950
SERIE MEGA
6000/6100
6200/6200LS
6300/6300LS
6400/6400LS
6600/6600E
6800/6800E
appendices
8000/8000LS
8100/8100LS
8100E 25 + 8 Double 0 510 766 310
L DIN 5480 N/A
8200/8200E 25 + 11 Long shaft 0 510 766 313
8400/8400E
8050/8050LS
8050E
8150/8150LS
8150E
8450/8450E
8550/8550E
8750/8750E
www.symko.fr
1 . Hydraulic pumps
/ Hydraulic gear pumps
for combines and silagers
DEUTZ FAHR COMBINE HARVESTERS

M900
Fig.1 1102 14 L CONE 1/5 Accessory 0 510 515 328 fig. 1

1202
SH300 11 L 9 tooth gear drive Accessory 0 510 525 312 N/A
2680
11 + 8 L CONE 1/5 Accessory & Sterring 0 510 565 324 fig. 2
2780
4060
Fig.2
4065 14 + 8 L CONE 1/5 Accessory & Sterring 0 510 565 335 fig. 2
4070
NEW HOLLAND COMBINE HARVESTERS

133
Fig.3
135
CONE 1/5 0 510 545 300
140 11 fig. 3
Counter-bearing Accessory
722 L
M103
CONE 1/5 0 510 525 311
M140 11 fig. 4
M153
1500
CONE 1/5
1520
Fig.4 11 Counter-bearing 0 510 545 300 fig. 3
1530 L Accessory
11 CONE 1/5 0 510 525 311 fig. 4
1545
16 CONE 1/5 0 510 625 315 fig. 4
1550
1555
8030
11 R CONE 1/5 Accessory 0 510 525 009 fig. 4
8040
Fig.5 8050
8060
16 L Accessory 0 510 625 315 fig. 4
8070 CONE 1/5
11 + 5.5 R Double 0 510 900 017 fig. 5
8080
8530
19 L Accessory 0 510 625 314 fig. 4
TF42
19 + 5.5 R CONE 1/5 Double 0 510 900 027 fig. 5
TF44
19 + 8 R Double 0 510 900 031 fig. 5
16 + 5.5 R 0 510 665 020 fig. 5

TX34 16 + 5.5 L CONE 1/5 Double 0 510 665 405 N/A
16 + 8 R 0 510 900 022 fig. 5
TX64 19 + 8 0 510 665 102

R CONE 1/5 Double fig. 5
TX68 19 + 8 0 517 665 003
www.symko.fr
1 . Hydraulic pumps
JOHN DEERE SILAGERS
NOTE
Hydraulic
Fig.1 Serie 5000 14 + 8 L CONE 1/5 Double 0 510 565 038 fig. 1
Serie 6000 11 + 8 + 5.5 L 9 tooth gear drive Triple 0 510 565 401 fig. 2
Mechanical
Fig.2
JOHN DEERE COMBINE HARVESTERS

Fig.3
1055 16 L CONE 1/5 Simple 0 510 625 340 N/A
1166
1174
electric
16 + 5.5 L CONE 1/5 Double 0 510 665 390 N/A
1177
1188
Standard Version
2054
2056
2058
2064
2066
11 + 8 + 5.5 L 9 tooth gear drive Triple 0 510 565 401 fig. 3
2254
2256
2258
diesel
2264
2266
Hillmaster Version: machine equipped with a slope correction system

2054
2056
2058
2064
2066
14 + 8 + 11 L 9 tooth gear drive Triple 0 510 565 402 fig. 3
2254
2256
Services
2258
2264
2266
2266 Extra 22.5 R 9 tooth gear drive Simple 0 510 725 063 N/A
CLASS COMBINE HARVESTERS

NOTE
appendices
i
Seals kits: LEXION

Contact us / 410 14 + 8 R 9 tooth gear drive Double 0 510 565 098 N/A
Piston pumps, 440
see p36 460 17 + 11 R 9 tooth gear drive Double
0 510 665 128
N/A
(new) and (ORI 0 668 742/1)
480
p44 (reman) 0 510 901 011
430 14 + 11 R 9 tooth gear drive Double N/A
(ex 0 510 565 083)
www.symko.fr
1 . Hydraulic pumps
/ CCLS type
piston pumps
ATM TRACTORS
Type of tractors Reference Pump model
Terrion 51416 R LA10VNO 45 DRS /52R-VRC40N00 E
CLASS TRACTORS
321001 R PA10V O 45 DFR1/52L-VSC12N00 E

038073.0 R LA10V O 60 DFR1/52R-VUC11N00 E
0581 836.0 R LA10VNO 28ED 71/53R-VSC11N00P E
Xerion 5833050
Xerion 5851431 R LA10V O 60 DFR1/52R-VUC11N00 E
XERION 3800 ; 3300 II 5964501 R LA10V O 60 DFR1/52R-VUC11N00 E
CASE IH TRACTORS
CVX1135 ; CVX1145 ; CVX1155 ; CVX1170 ; CVX1190 ; CVX120 ;

132575300 R LA10C O 45 DFR1/52R-VUC07H002D E
CVX130 ; CVX150 ; CVX170
CS100 ; CS110 ; CS120 ; CS130 ; CS150 132575301 R LA10C O 45 DFR1/52R-VUC07H002D E
CVX1135 ; CVX1145 ; CVX1155 ; CVX1170 ; CVX1190 132575310 R LA10CNO 63 DFR1/52R-VWC12H602D E
873327250 R LA10C O 45 DFR1/52R-VUC12H502D E
MX100 394268A2 R LA10VNO 41 DFR1/52L-HRC40N00 E
MX150 394269A2 R LA10VNO 45 DFR1/52L-HTC40N00 E
CASE IH / NEW HOLLAND TRACTORS
T7030 ; TM190 ; T7050 ; TM175 ; T7040 ; T7060 47133946 R LA10CNO 63 DFR1/52R-VWC12H602D E

47133946 R LA10CNO 63 DFR1/52R-VWC12H602D E
Case IH Maxxum ; New Holland T6 ; Steyr Profi ; Case IH Puma ;
51986940 R LA10C O 45 DFR1/52R-VWC12H502D E
New Holland T7 ; Steyr 6000CVT
84164091
PUMA 84164100 R LA10C O 45 DFR1/52R-VWC12H502D E
www.symko.fr
1 . Hydraulic pumps
FENDT TRACTORS
Hydraulic
8170 ; 8180 ; 8210 ; 8220, 8240 ; 8250 ; 8260 ; 8270 ; 8280 ; 8280
3790900M1 R LA10V O 71 DFR /31R-PCC42N00 E
Xtra
200 V,F,P G260941010011 R LA10VNO 28 DRS /53L-VTC09N00 E
G411940010010 R LA10V O 28 DFR1/52R-VSC11N00 E
400 ; 500 G411940010011 R LA10V O 28 DFR5/52R-VSC11N00 E
Mechanical
G412940010010 R LA10V O 45 DFR1/52R-VWC11N00 E
400 ; 500 G412940010011 R LA10V O 45 DFR5/52R-VWC11N00 E
400 ; 700 ; 800 ; 900 ; 926 ; 930 G716940010011 R LA10V O 45 DFR1/52R-VWC11N00 E
G716940010012 R LA10V O 45 DFR5/52R-VWC11N00 E
700 G725940011010 R LA10V O 60 DFR1/52R-VWC11N00 E
800 G835940010010 R LA10V O 45 DFR1/52R-VSC11N00 E
800 G835940011010 R LA10V O 60 DFR1/52R-VWC11N00 E
800 G835940012010 R LA10VNO 85 DRS /53R-VWC11N00 E
G930940010010 R LA10V O 45 DFR5/52R-VSC11N00 E
712 ; 714 ; 716 ; 718 ; 815 ; 818 ; 820 ; 916-930 G930940010011 R LA10V O 45 DFR5/52R-PSC11N00 E
G930940010021 R LA10VNO 63 DFR5/52R-VSC11N00 E
electric
900 G931941010010 R LA10V O 60 DFR1/52R-VSC11N00 E
900 G931941011010 R LA10VNO 85 DRS /53R-VSC11N00 E
JOHN DEERE TRACTORS
7200 ; 7400 ; 7210 ; 7410 ; 7510 ; 6100 ; 6200 ; 6300 ; 6400 ; 6500
diesel
; 6506 ; 6600 ; 6800 ; 6900 ; 6200L ; 6300L ; 6400L ; 6500L ; 6010 ;
6110 ; 6210 ; 6310 ; 6410 ; 6510 ; 6610 ; 6810 ; 6910 ; 6910S ; 6110L
AL161041 R LA10VNO 25 DFR1/52R-HRC40N00 E
; 6210L ; 6310L ; 6410L ; 6510L ; 6310S ; 6410S ; 6510S ; 6120 ; 6220
; 6320 ; 6420 ; 6420S ; 6520 ; 6620 ; 6820 ; 6920 ; 6920S ; 6120L ;
6220L ; 6320L ; 6420L ; 6520L
7520 ; 7600 ; 7700 ; 7800 ; 7200 ; 7400 ; 7210 ; 7410 ; 7510 ; 7610 ;
7710 ; 7810 ; 6100 ; 6200 ; 6300 ; 6400 ; 6500 ; 6506 ; 6600 ; 6800
; 6900 ; 6200L ; 6300L ; 6400L ; 6500L ; 6010 ; 6110 ; 6210 ; 6310 ;
6410 ; 6510 ; 6610 ; 6810 ; 6910 ; 6910S ; 6110L ; 6210L ; 6310L ;
AL161043 R LA10VNO 41 DFR1/52R-HRC40N00 E
6410L ; 6510L ; 6310S ; 6410S ; 6510S ; 6405 ; 6605 ; 6120 ; 6220
; 6320 ; 6420 ; 6420S ; 6520 ; 6620 ; 6820 ; 6920 ; 6920S ; 6120L ;
6220L ; 6320L ; 6420L ; 6520L ; 6415 ; 6615 ; 7420 ; 7515 ; SE6920 ;
6125 ; 6145 ; 6068TBM01 ; 6068TBM02 ; 6125J ; 6130J
Services
7520 ; 7420 ; 7220 ; 7320 AL161044 R LA10VNO 45 DFR1/52R-HRC40N00 E
6230 PREMIUM ; 6330 PREMIUM ; 6430 PREMIUM ; 6530 PREMIUM
; 6630 PREMIUM ; 6130 ; 6230 ; 6330 ; 6430 ; 6530 ; 6630 ; 6830
AL166637 R LA10V O 28 DFR1/52R-HTC40N00 E
; 6930 ; 6534 ; 6534 PREMIUM ; 6.8 L ; 6.8L ; 6068 ; 6068HL480 ;
6068HL487
AL166638 R LA10VNO 41 DFR1/52R-HTC40N00 E
6230 PREMIUM ; 6330 PREMIUM ; 6430 PREMIUM ; 6530 PREMIUM ;
6630 PREMIUM ; 7430 PREMIUM ; 7530 PREMIUM ; 7130 PREMIUM ;
7230 PREMIUM ; 7330 PREMIUM ; 6130 ; 6230 ; 6330 ; 6430 ; 6530 ;
6630 ; 6830 ; 6930 ; 7130 ; 7230 ; 7330 ; 7530 ; 7425 ; 7525 ; 7430 E
PREMIUM ; 7530 E PREMIUM ; 6534 ; 6534 PREMIUM ; 6165J ; 6140J AL166639 R LA10VNO 45 DFR1/52R-HTC40N00 E
; 6155J ; 6180J ; 1654 ; 1854 ; 6170R ; 6190R ; 6210R ; 6.8 L ; 6.8L ;
appendices
6068 ; 6068HL480 ; 6068HL487 ; 6068RW403 ; 6068RW404 ; 2054 ;

4045HL495 ; 4045HL496 ; 4045HL497 ; 6068HL490 ; 6105R ; 6115R ;
6125R ; 6130R ; 6140R ; 6150R ; 6068RW405 ; 6150RH
AL167875-A R LA10VNO 63 DRS /52R-VRC11N00 E
www.symko.fr
1 . Hydraulic pumps
MASSEY FERGUSON TRACTORS
3635 ; 3645 ; 3655 ; 3670 ; 3690 ; 8110 ; 8120 ; 8130 ; 8140 ; 8150 ;
3712289M5 R LA10V O 45 DFR /52L-VCC12N00 E
8160
All 5400 series ; 5611-5612-5613 ; 6612-6613-6615 ; 7614-7615
; 5611-5612-5613 ; 6613-6614-6615-6616 ; 7715-7716-7718 ; 3716370M5 R A10V O 45 OV /50L-PCX68N00 E
7615‑7616-7618
4302405H1
7719 ; 7720 ; 7722 ; 7724 ; 7726 R AA10VNO 63 OV /50L-PCX68N00 E
(Massey Ferguson: 4302405M1)
4308765H1
5608 ; 5609 ; 5610
(Massey Ferguson: 43088765M1)
n.a. R LA10VNO 85 DRS /53R-VCC11N00 E
MC CORMICK TRACTORS
394268A1: MC80/90/100/115 394268A1

R LA10VNO 41 DFR1/52L-HRC40N00 E
394268A2: MC120/135 Power 6 394268A2
R902451726 R LA10CNO 63 DFR1/52R-VWC12H602D E
SAME DEUTZ FAHR TRACTORS
X Tractor Tier3 + TTV630-640-650 opt.Tier3 + 7210-7230-7250 TTV

0.016.5260.0 R PA10V O 45 DFR1/52R-VUC12N00 E
opt.
Agrotron TTG 175 - 200 (Ersatz) 4426174 R LA10V O 45 DFR1/52L-VUC12N00 E
Agrotron 105 -165 (Ersatz) 04432500/10 R LA10C O 45 DFR1/52R-VUC07H002D E
M Profi - TTV 610-620 Tier3 Version 04452222/10 R LA10CNO 45 DFR1/52R-VSC07H503D E
Agroton X720, X265 4452760 R PA10V O 45 DFR1/52R-VUC12N00 E
KT High-Line 04453863/10 R LA10VNO 45 DFR1/52L-VCC07K01 E
KT High-Line 04453863/10 R LA10VNO 45 DFR1/52L-VCC07K01 E
TTV 410-430 Tier3 +TTV 610-620-625-605-410-420-430-440-450-625-
2.4539.008.0/10 R LA10CNO 45 DFR /52R-VSC07H503D E
Tier4 + M410-420-430-605 Tier4 (EOP2013)
TTV 410-430 Tier3 +TTV 610-620-625-605-410-420-430-440-450-625-
2.4539.008.0/20 R LA10CNO 45 DFR1/52R-VSC07H503D E
Tier4 + M410-420-430-605 Tier4
M615-625-640-645-440-450-660 Profiline (EOP2013) 2.4539.011.0 R LA10CNO 45 DFR /52R-VSC07H503D E
7210 -7230 -7250 TTV 2.4539.350.0 R LA10VNO 63 DRS /52R-VWC12N00 E
New IRON (DF7 AUDAX)+ IRON 190-220 2.4539.840.0/30 R LA10C O 45 DFR1/52L-VUC12H003G E
NOTE
i Pumps for construction machines:
Contact us
www.symko.fr
1 . Hydraulic pumps
/ Piston pumps
Hydraulic
BOSCH REXROTH – VARIABLE A4VG
Size 28 40 56 71 90 125 180 250
Displacement volume
Variable displacement pump Vg max. cm3 28 40 56 71 90 125 180 250
Feed pump (with p=20bar) Vg Sp cm3 6,1 8,6 11,6 19,6 19,6 28,3 39,8 52,5
Engine rpm
Mechanical
max. to Vg max. nmax. cont. min–1 4250 4000 3600 3300 3050 2850 2500 2400
restricted maximum1) nmax. restr. min–1 4500 4200 3900 3600 3300 3250 2900 2600
intermittent maximum2) nmax. interm. min–1 5000 5000 4500 4100 3800 3450 3000 2700
min. nmin. min–1 500 500 500 500 500 500 500 500
Flow
at nmax. cont. and Vg max. qv max. L/min 119 160 202 234 275 356 450 600
Power3)
at nmax. cont. and Vg max. Δp = 400 bar Pmax. kW 79 107 134 156 183 237 300 400
Torque3)
Δp = 400 bar Tmax. Nm 178 255 356 451 572 795 1144 1590
For Vg max
Δp = 100 bar T Nm 44,5 63,5 89 112,8 143 198,8 286 398
electric
Mass inertia J kgm2 0,0022 0,0038 0,0066 0,0097 0,0149 0,0232 0,0444 0,0983
Angular acceleration 4) rad/s2 38000 30000 24000 21000 18000 14000 11000 6700
Regime variation 4) min–1 103 81 72 69 64 55 50 34
Torsional rigidity Shaft end S Nm/rad 31400 69000 80800 98800 158100 218300 244500 354500
Shaft end T Nm/rad – – 95000 120900 – 252100 318400 534300
Shaft end A Nm/rad – 79600 95800 142400 176800 256500 – –
Shaft end Z Nm/rad 32800 67500 78800 122800 137000 223700 319600 624200
Shaft end U Nm/rad – 50800 – – 107600 – – –
Filling volume V l 0,9 1,1 1,5 1,3 1,5 2,1 3,1 6,3
Weight (without power take-off). m kg 29 31 38 50 60 80 101 156
Limited max output: > at 50% of the maximum power (for ex at Vg max and PN /2)
1)
diesel
Intermittent maximum speed : > Quick start
2)
> In case of over-revving: Δp = 70...150 bar and Vg max

> Reversal peaks: Δp < 300 bar and t < 0,1 s.
3)
Without feed pump
4)
Available only for the single effect pumps
BONDIOLI – VARIABLE M4PV 21-28-37
Services
Theoretical displacement (cm³) 21 28 37
continue 250 250 250
Pressure (bar)
pic 350 350 350
max 3600 3600 3400
Rotation speed (min-1)
min 500 500 500
BONDIOLI – VARIABLE M4PV 34-45-50-58-65

appendices
Theoretical displacement (cm³) 34 46 50 58 65

continue 300 300 300 250 250
Pression (bar)
pic 400 400 400 400 400
max 3800 3800 3800 3600 3600
Rotation speed (min-1)
min 500 500 500 500 500
NOTE
i
For all brand piston pumps: Contact us
www.symko.fr
1 . Hydraulic pumps
/ Hand pumps
Max pressure Flow rate Weight

Reference ØP
(bar) (cm³) (kg)
SYMP12SV1 12 300 8 3.1

SYMP16S1 16 200 15 3.1
Simple SYMP20S1 20 150 20 3.2

effect SYMP1230SV1 12/30 300/50 5/25 3.4
SYMP25SDA1 16 120 30 3.2
SYMP205DA1 14 160 20 3.2
SYMP16D1 16 200 15 3.2
Dual
SYMP20D1 20 150 20 3.2
effect
SYMP25DDA1 16 150 30 3.3
Reservoirs*
Vol. Weight
Reference A B C D E
(l) (kg)
SYMRP 1 166 89 27 50 135 1 2.2

SYMRP 2 126 164 21 84 170 2 2.3
SYMRP 4 169 184 36 96 170 4 3
SYMRP 6 205 205 36 108 170 6 4.1
SYMRP 8 225 225 36 120 170 8 5.1
*Possibility to order a plastic tank
VALVES LEVERS
Chrome steel
+
rubber grip
Reference SYMPRob
Weight
Reference A B C
(kg)
SYMLEV/PM 20 45 500 0.7
www.symko.fr
1 . Hydraulic pumps
/ Gear pumps accessories
Hydraulic
4 screws curved aluminium flanges
BBGerman standard curved. (DIN) (square screw impact).
BBDelivered with screws, washers and O-Ring seals.
BBOperating pressure: 180 bar.
Pitch
Mechanical
Reference Gas orifice CHC fixing screw
(mm)
SYMB3-001 3/8 30 M6x30 and 45
SYMB3-002 1/2 30 M6x30 and 45
SYMB3-003 3/8 35 M6x30 and 45
SYMB3-004 1/2 35 M6x30 and 45
SYMB3-005 1/2 40 M6x35 and 55
SYMB3-006 3/4 40 M6x35 and 55
SYMB3-007 3/4 55 M8x45 and 60 Entraxe
SYMB3-008 1” 55 M8x45 and 60
electric
4 screws curved steel flanges
BBGerman standard curved. (DIN) (square screw impact).
BBDelivered with screws, washers and O-Ring seals..
BBOperating pressure: 250 – 300 bar.
Pitch
(mm)
diesel
SYMB1-099 3/8 30 M6x35 and 45
SYMB1-100 1/2 30 M6x35 and 45
SYMB1-101 3/8 35 M6x20 and 35
SYMB1-102 1/2 35 M6x20 and 35
SYMB1-103 1/2 40 M6x20 and 45
SYMB1-104 3/4 40 M6x20 and 45
SYMB1-105 3/4 55 M8x25 and 50
SYMB1-106 1” 55 M8x25 and 50
Services
4 screws straight steel flanges
BBGerman standard. (DIN) (square screw impact).
Pitch
appendices

(mm)
SYMB2-001 1/4 35 M6x22
SYMB2-002 3/8 35 M6x22
SYMB2-003 1/2 35 M6x22
SYMB2-004 3/8 40 M6x22
SYMB2-005 1/2 40 M6x22
SYMB2-006 3/4 40 M6x25
SYMB2-009 3/4 55 M8x35
SYMB2-010 1” 55 M8x35
www.symko.fr
1 . Hydraulic pumps
3 screws curved aluminium flanges
BBGerman standard. (DIN) (square screw impact).
BBDelivered with screws, washers and O-Ring seals. Reference Gas orifice
Pitch
CHC fixing screw
BBOperating pressure: 200 bar. (mm)
SYMB3-101 3/8 26 M5x35
SYMB3-102 1/2 26 M5x35
SYMB3-103 3/8 30 M6X35
SYMB3-104 1/2 30 M6x35
Entraxe
SYMB3-105 1/2 40 M8x45
SYMB3-106 3/4 40 M8x45
SYMB3-107 3/4 51 M10x60
SYMB3-108 1” 51 M10x60
SYMB3-109 1”1/4 62 M12x35
3 screws cast iron flanges

BBItalian standard curved. (diamond screw impact). Reference Gas orifice
Pitch
CHC fixing screw
(mm)
BBOperating pressure: 250 – 300 bar.

SYMB1-003 3/8 30 M6x20
SYMB1-004 1/2 30 M6x20
SYMB1-005 3/8 40 M8x25
SYMB1-006 1/2 40 M8x25
SYMB1-007 3/4 40 M8x25
SYMB1-008 3/4 51 M10x30
SYMB1-009 1” 51 M10x30
SYMB1-012 1” 62 M12x35
SYMB1-013 1”1/4 62 M12x35
3 screws straight steel flanges

BBItalian standard. (diamond screw impact). Reference Gas orifice
Pitch
CHC fixing screw
(mm)

SYMB11-001 3/8 30 M6x16
SYMB11-002 1/2 40 M8x20
SYMB11-003 3/4 51 M10x25
SYMB11-005 1” 62 M10x25
SYMB11-006 1” 62 M12x25
SYMB11-007 1”1/4 72 M12x30
Threaded 3000 PSI SAE flanges

Pitch CHC fixing Pitch CHC fixing

Reference Gas orifice Reference Gas orifice
(mm) screw (mm) screw
SYMB4-001 3/8 38.10 x 17.48 M8 x 30 SYMB90-003 1” 58.72 x 30.18 M10 x 40
SYMB4-002 1/2 38.10 x 17.48 M8 x 30 SYMB4-005 1”1/4 58.72 x 30.18 M10 x 40
SYMB90-001 1/2 47.63 x 22.23 M10 x 35 SYMB90-004 1”1/4 69.85 x 35.71 M12 x 45
SYMB4-003 3/4 47.63 x 22.23 M10 x 35 SYMB4-006 1”1/2 69.85 x 35.71 M12 x 45
SYMB90-002 3/4 52.37 x 26.19 M10 x 35 SYMB90-005 1”1/2 77.77 x 42.88 M12 x 45
SYMB4-004 1” 52.37 x 26.19 M10 x 35 SYMB4-007 2” 77.77 x 42.88 M12 x 45
NOTE
i For other parts: Contact us.
www.symko.fr
1 . Hydraulic pumps
/ Couplings
Hydraulic
Mechanical
For gear pumps
electric
Tapered shaft 1/8 (ITALIAN)
Pump
Reference H A C G D CH L I B E Shaft d ch t l
group
SYMND7 2 87 65 42 47.5 19 6 21.8 18 34 21.5 1/8 17.2 3.2 18.5 23
SYMND10 2 87 65 48 47.5 24 8 27.3 18 34 21.5 1/8 17.2 3.2 18.5 23
SYMND13 2 97 65 53 58 28 8 31 18 34 22 1/8 17.2 3.2 18.5 23
SYMND16 2 135 86 73 88 38 10 41 20 48 27 1/8 17.2 3.2 18.5 23
diesel
SYMND17 3 135 86 73 88 38 10 41 20 48 27 1/8 22.2 4 23.6 28
SYMND43C 3 168 108 84 110 42 12 45.3 24 64 34 1/8 22.2 4 23.6 28
SYMND44C 3 168 108 84 110 48 14 51.8 24 64 34 1/8 22.2 4 23.6 28
For gear pumps

Tapered shaft 1/5 (GERMAN)
Reference
Pump
group
H A C G D CH L I B E shaft d ch t l Services
SYMND202 2 87 65 42 47.5 19 6 21.8 18 34 21.5 1/5 16.9 3 17.7 19
SYMND203 2 87 65 48 47.5 24 8 27.3 18 34 21.5 1/5 16.9 3 17.7 19
SYMND206 2 97 65 53 58 28 8 31 18 34 22 1/5 16.9 3 17.7 19
SYMND210 2 135 86 73 88 38 10 41 20 48 27 1/5 16.9 3 17.7 19
SYMND211 3 135 86 73 88 38 10 41 20 48 27 1/5 25.2 5 26.3 29

appendices
SYMND43E 3 168 108 84 110 42 12 45.3 24 64 34 1/5 25.2 5 26.3 29
SYMND44E 3 168 108 84 110 48 14 51.8 24 64 34 1/5 25.2 5 26.3 29
NOTE
i For other parts: Contact us.
www.symko.fr
1 . Hydraulic pumps
Through the repair service, SYMKO has built over time very close relations with the major agricultural
and construction manufacturers. These enabled, in their dealer network, the setting up of reman
pumps, engines or complete transmissions, thus offering an alternative to the purchase of new
equipment.
/ Remanufactured pumps and

continuously variable transmissions
CASE IH TRACTORS
Part Type of part Brand Manufacturer reference
MAXXUM 5120 ; 5130 ; 5140 ; 5150 ; 5220 ; 5230 ; 5240 ; 5250 Piston pump Rexroth 1343659C1 - 119084A2
MX 80 ; MX 100 ; MX 110 ; MX 120 ; MX 135 Piston pump Rexroth 394268A1 - 394268A2
MX 80 ; MX 100 ; MX 110 ; MX 120 ; MX 135 Piston pump Vickers 199142A4
MX 80C ; MX 90C ; MX 100C Piston pump Rexroth 394268A1 - 394268A2
MAXXUM MXU Piston pump Rexroth 5198694
Standard flow CVX ; CVT ; PUMA Piston pump Rexroth 5198694
Hi-Flow version PUMA CVX Piston pump Rexroth 84212254
MAXXUM MXU New generation Piston pump Rexroth 87568039
PUMA CVX 130; 145; 160 Transmission Rexroth 84356582
PUMA CVX 165 to 230 Transmission Rexroth 87724314/84536173
CVX Transmission Linde 192310250005
NEW HOLLAND TRACTORS
TSA ; T6000 ; T7000 Nouvelle Génération Piston pump Rexroth 87568039

T6 AUTOCOMMAND 140 ; 150 ; 160 Transmission Rexroth 84568306
T7 AUTOCOMMAND 170 ; 185 ; 200 ; 210 Transmission Rexroth 84318348
T7 TIER IVB 175 to 270 AUTOCOMMAND Transmission Rexroth 84536173
T7 AUTOCOMMAND 220 ; 235 ; 250 ; 260 ; 270
Transmission Rexroth 87724314
T7030 to T7070 AC
TVT Transmission Linde 192310250005
Serie 60 ; Serie M Piston pump Sauer 82013741
STEYR TRACTORS
Serie 9000 ; Serie CS ; CVT Piston pump Rexroth 1-32-575-300

CVT Transmission Linde 192310250005
FENDT TRACTORS
VARIO : 700,800,900 Piston pump Rexroth G716.940.010.012

XYLON 520 to 524 ; Serie 500 (509 to 515) ; Serie 800
Piston pump Rexroth G514.940.010.011
(anciennes versions) ; Serie 900 (916,920,924,926) FAVORIT
www.symko.fr
1 . Hydraulic pumps
SAME DEUTZ-FAHR JOHN DEERE
Hydraulic
TTV ; AGROTRON Serie MK3 Piston pump Rexroth 0.443.2500/10

K Serie Piston pump Rexroth 0.445.3863/10
IRON 130 to 185 Piston pump Rexroth 0.445.2222/10
IRON Piston pump Rexroth 0.445.3863/10
JOHN DEERE TRACTORS
Mechanical
Serie 6000,6010,6020,6030 Piston pump Rexroth AL151313 - AL161043
MC CORMICK TRACTORS
electric
MC 80, MC 90, MC 100, MC 110, MC 120, MC 135 Piston pump Rexroth 394268A2
MX 80, MX 90, MX 100, MX 110, MX 120 Piston pump Rexroth 394268A1 - 394268A2
MTX 100, MTX 110, MTX 120, MTX 135, MTX 150 Piston pump Rexroth 394268A1 - 394268A2
CLAAS COMBINE HARVESTERS
diesel
Lexion Pump progress Danfoss 501838

Lexion Final drive Danfoss 501829
Lexion Complete transmission Danfoss 501829 - 501838
MANITOU TELEhandlers
Part Type of part Brand Manufacturer reference Services
MLT 633 LSU (100 cv), MLT 634 LSU (100 cv) Piston pump Rexroth 243638
CATERPILLAR TELEhandlers
appendices
TH 220,TH 230 Piston pump Rexroth 179-1863-01
www.symko.fr
1 . Hydraulic pumps
Pumps and continuously variable
transmissions remanufactured
BEFORE AFTER
All items sold in reman are checked,

bench tested and guaranteed by our
services.
Authorized Authorized
repair center repair center
www.symko.fr
2 . hydraulic motors
/ Gerotors motors
Hydraulic
Hydraulic motors convert hydraulic energy into mechanical energy. They are high torque and
constant displacement motors. For a given flow and pressure, the displacement defines the speed
and the torque. For a given displacement, the speed is a function of the flow and the torque is a
function of the pressure.
OMM and OMP categories
Mechanical
Compact, with a conventional crown wheel, these types of motors
are suitable for prolonged operation under moderate pressure or
intermittent operation under high pressures.
OMM
Max
Max rpm Power Max torque Pressure Ø cylindrical
MOTOR Type Reference continuous
(tr/min) (kW) (Nm) (bar) shaft
flow (l/min)
electric
OMM8 151G0041S 1 950 1.8 11 16 140 16
OMM12 151G0004S 1 550 2.4 16 20 140 16
OMM20 151G0005S 1 250 2.4 25 20 140 16
OMM32 151G0006S 630 2.4 40 20 140 16
OMM50 151G0013S 400 2.4 46 20 70 16
diesel
OMM motor dimensions
Services
appendices
www.symko.fr
OMP
Max
MOTOR Max rpm Power Max torque Pressure Ø cylindrical
Reference continuous
Type (tr/min) (kW) (Nm) (bar) shaft
flow (l/min)
OMP25 151-0640S 1 600 5 33 40 100 25
OMP32 151-0641S 1 560 6 43 50 100 25
OMP40 151-0642S 1 500 7 52 60 100 25
OMP50 151-0610S 1 230 10 93 60 140 25
OMP80 151-0611S 770 10 150 60 140 25
OMP100 151-0612S 615 11 190 60 140 25
OMP125 151-0613S 480 10 240 60 140 25
OMP160 151-0614S 385 10 300 60 140 25
OMP200 151-0615S 310 8 300 60 115 25
OMP250 151-0616S 250 6 300 60 90 25
OMP315 151-0617S 195 5 300 60 75 25
OMP400 151-0618S 155 4 300 60 60 25
OMP motor dimensions
OMM, OMP motors seals kits

Reference Motor type Reference Designation in kit
151G0201S OMM Serie 0 633B3209S Shaft seal 48x28,6x6

151G0202S OMM Serie 1 633B3385S Shaft seal 42x28,6x5,5 151-1275S
151-1275S OMP/A Series 4, 5, 6, 7 (former. 151-1154) 633B3273S Shaft seal 48x35x5,5 151-1179S
151-1177S OMP/A flange C 633B3198S Dust cover 42x35x3,5 151-1179S
151-1179S OMP/A 32 mm diameter shaft 151-1313S Dust cover 35x27,5x4 151-1275S
151-1279S OMP HP seals 633B9003S Flexible shaft seal 36,8x29,7x3,5
151-1286S OMP Serie 8 633B0361S High pressure shaft seal 151-1286S
633B0370S High pressure dust cover 151-1286S
NOTE
i Shaft seals only: 10 pieces minimum
(possibility for different seals)
www.symko.fr
OMR category
Thanks to the rollers of the ring gear and the efficiency of the hydrodynamic
Hydraulic
lubrication, frictions are reduced to a minimum. This ensures good longevity and
better performances, even under continuous high pressures. The ring gear is
recommended with very fluid oils for systems requiring multiple inversions.
Max
Max torque Pressure
MOTOR Type Reference Max rpm (tr/min) Power (kW) continuous flow Ø cylindrical shaft
(Nm) (bar)
Mechanical
(l/min)
OMR50 151-0710S 775 7.0 100 40 140 25
OMR80 151-0711S 750 12.5 195 60 175 25
OMR100 151-0712S 600 13 240 60 175 25
OMR125 151-0713S 475 12.5 300 60 175 25
OMR160 151-0714S 375 10 300 60 130 25
OMR200 151-0715S 300 8 300 60 110 25
OMR250 151-0716S 240 6.0 300 60 80 25
OMR315 151-0717S 190 5 300 60 70 25
electric
OMR375 151-0718S 160 4 300 60 55 25
OMR motor dimensions
diesel
Services
OMR, OMH motors seals kits

NOTE
appendices
Reference Motor type i Shaft seals only: 10

151-1277S OMR Series 2, 3, 4, 5 (former 151-1159)
pieces minimum
151-1166S OMR 32 mm diameter shaft
(possibility for different
151-1280S OMR HP seals
151H1100S OMH HP seals
seals)
www.symko.fr
OMS, OMT and OMV categories
These three motors are suitable for prolonged operation under severe
conditions (high pressures, very fluid oils and frequent inversions). Their tapered
roller bearings allow the absorption of dynamic and static radial loads. Driven
by a small engine separated cardan shaft, the distribution disk with balancing
plate minimizes hydraulic and mechanical losses. Result: high efficiency even
under high pressures. To achieve steady running at a steady to an extremely
slow speed, choose OMS, OMT or OMV.
OMS
Max rpm Power Max torque Max continuous Pressure
MOTOR Type Reference Ø cylindrical shaft
(tr/min) (kW) (Nm) flow (l/min) (bar)
OMS80 151F0500S 810 16 200 65 175 32
OMS100 151F0501S 750 17.5 250 75 175 32
OMS125 151F0502S 600 15.5 320 75 175 32
OMS160 151F0503S 470 15.5 340 75 150 32
OMS200 151F0504S 375 14 400 75 140 32
OMS250 151F0505S 300 12.5 450 75 125 32
OMS315 151F0506S 240 11.5 540 75 120 32
OMS400 151F0605S 190 10.5 560 75 105 32
OMS motor dimensions
OMS, OMT and OMV motors seals kits

Reference Motor type NOTE
151F0111S OMS Series 1/2
i Shaft seals only: 10
151F0103S OMS Series 1/2 (distribution side)
151F0117S OMS Serie 2 shaft PTO
pieces minimum
151B0113S OMT Series 1/2
(possibility for different
151B0114S OMT Series 1/2 (distribution side)
seals)
151B0129S OMV Serie 2
151B0125S OMV Serie 1/2 (distribution side)
www.symko.fr
Hydraulic
OMT
Max rpm Power Max torque Max continuous Pressure
MOTOR Type Reference Ø cylindrical shaft
(tr/min) (kW) (Nm) flow (l/min) (bar)
OMT160 151B3000S 625 26.5 470 100 200 40
OMT200 151B3001S 625 33.5 590 125 200 40
OMT250 151B3002S 500 33.5 730 125 200 40
Mechanical
OMT315 151B3003S 380 33.5 950 125 200 40
OMT400 151B3004S 305 30 1080 125 180 40
OMT500 151B3005S 240 26.5 1220 125 160 40
OMT motor dimensions
electric
diesel
Services
appendices
www.symko.fr
OMV
Max rpm (tr/ Max torque Max continuous Pressure
MOTOR Type Reference Power (kW) Ø cylindrical shaft
min) (Nm) flow (l/min) (bar
OMV315 151B3100S 510 42.5 920 160 200 50
OMV400 151B3101S 500 53.5 1180 200 200 50
OMV500 151B3102S 400 53.5 1460 200 200 50
OMV630 151B3103S 315 48 1660 200 180 50
OMV800 151B3104S 250 42.5 1880 200 160 50
OMT motor dimensions
www.symko.fr
/ BONDIOLI
Hydraulic
KM category
Displacement Rpm Max flow rate Max torque Max pressure bar (psi)
Code
cm³ (in³/rev) cont. max. cont. max. cont. max. cont. max. peak
Mechanical
SYMKM008 8.4 (0.5) 1864 2293 16 (4) 20 (5) 11 (97) 14 (124) 100 (1450) 140 (2030) 200 (2900)
SYMKM012 13.1 (0.8) 1521 1871 20 (5) 25 (7) 17 (150) 22 (195) 100 (1450) 140 (2030) 200 (2900)
SYMKM020 20.1 (1.2) 989 1229 20 (5) 25 (7) 26 (230) 34 (301) 100 (1450) 140 (2030) 200 (2900)
SYMKM032 31.8 (1.9) 622 767 20 (5) 25 (7) 40 (354) 55 (487) 100 (1450) 140 (2030) 160 (2320)
SYMKM040 40.2 (2.5) 495 620 20 (5) 25 (7) 49 (434) 64 (566) 100 (1450) 140 (2030) 160 (2320)
SYMKM050 50.3 (3.1) 395 495 20 (5) 25 (7) 44 (389) 72 (637) 70 (1015) 130 (1885) 160 (2320)
electric
diesel
Services
appendices
www.symko.fr
KP category
Code
SYMKP025 25 (1.5) 1570 1687 40 (11) 45 (12) 35 (310) 48 (425) 100 (1450) 140 (2030) 225 (3260)
SYMKP032 32 (2.0) 1550 1674 50 (13) 55 (15) 45 (398) 57 (504) 100 (1450) 140 (2030) 225 (3260)
SYMKP040 40 (2.5) 1471 1670 60 (16) 70 (19) 65 (575) 74 (655) 100 (1450) 140 (2030) 225 (3260)
SYMKP050 50 (3.0) 1208 1500 60 (16) 75 (20) 91 (805) 108 (956) 140 (2030) 175 (2540) 240(3480)
SYMKP060 59 (3.6) 1185 1271 60 (16) 75 (20) 125 (1106) 136 (1204) 160 (2320) 175 (2540) 240(3480)
SYMKP080 78 (4.8) 896 960 60 (16) 75 (20) 164 (1451) 183 (1620) 160 (2320) 175 (2540) 240(3480)
SYMKP100 96 (5.9) 728 780 60 (16) 75 (20) 195 (1726) 213 (1885) 160 (2320) 175 (2540) 240(3480)
SYMKP125 125 (7.6) 559 599 60 (16) 75 (20) 258 (2285) 278 (2460) 160 (2320) 175 (2540) 240(3480)
SYMKP160 154 (9.4) 452 483 60 (16) 75 (20) 321 (2840) 362 (3205) 160 (2320) 175 (2540) 240(3480)
SYMKP200 190 (11.6) 367 385 60 (16) 75 (20) 380 (3365) 420 (3720) 150 (2180) 175 (2540) 240(3480)
SYMKP250 240 (14.6) 291 312 60 (16) 75 (20) 445 (3940) 557 (4930) 140 (2030) 175 (2540) 240(3480)
SYMKP315 303 (18.5) 228 245 60 (16) 75 (20) 460 (4071) 602 (5330) 120 (1740) 160 (2320) 200(2900)
SYMKP400 388 (23.7) 155 189 60 (16) 75 (20) 488 (4320) 625 (5532) 95 (1380) 125 (1810) 180(2610)
A Length / Weight
Code A in mm (in) kg(lb)

SYMKP025 132.4 (5.21) 5.2 (11.46)
SYMKP032 133.4 (5.25) 5.3 (11.68)
SYMKP040 134.4 (5.29) 5.4 (11.90)
SYMKP050 134.4 (5.29) 6.0 (13.23)
SYMKP060 136.4 (5.37) 6.0 (13.23)
SYMKP080 138.4 (5.45) 6.1 (13.45)
SYMKP100 140.9 (5.55) 6.2 (13.67)
SYMKP125 142.4 (5.61) 6.3 (13.89)
SYMKP160 148.9 (5.86) 6.4 (14.11)
SYMKP200 153.9 (6.06) 6.6 (14.55)
SYMKP250 160.4 (6.31) 6.8 (14.99)
SYMKP315 168.9 (6.65) 7.1 (15.65)
SYMKP400 180.0 (7.09) 7.4 (16.31)
www.symko.fr
KR CATEGORY
Hydraulic
Code
SYMKR40 40 (2,5) 1116 1515 45 (12) 61 (16) 93 (823) 123 (1088) 155 (2250) 207 (3000) 224 (3250)
SYMKR60 59 (3,6) 890 1142 53 (14) 68 (18) 138 (1221) 172 (1522) 155 (2250) 207 (3000) 224 (3250)
SYMKR70 71 (4,3) 865 1078 61 (16) 76 (20) 176 (1558) 207 (1832) 172 (2500) 207 (3000) 241 (3500)
SYMKR90 88 (5,4) 691 864 61 (16) 76 (20) 222 (1965) 263 (2327) 172 (1200) 207 (3000) 241 (3500)
SYMKR100 100 (6,1) 610 760 61 (16) 76 (20) 246 (2177) 289 (2558) 173 (2500) 207 (3000) 241 (3500)
SYMKR115 113 (6,9) 539 672 61 (16) 76 (20) 284 (2513) 327 (2894) 173 (1200) 207 (3000) 241 (3500)
SYMKR125 129 (7,9) 472 588 61 (16) 76 (20) 316 (2797) 375 (3319) 174 (2500) 207 (3000) 241 (3500)
Mechanical
SYMKR160 160 (9,8) 379 469 61 (16) 76 (20) 400 (3540) 454 (4018) 174 (1200) 207 (3000) 241 (3500)
SYMKR200 198 (12,1) 308 384 61 (16) 76 (20) 462 (4088) 544 (4814) 175 (2500) 207 (3000) 241 (3500)
SYMKR250 236 (14,4) 249 315 61 (16) 76 (20) 548 (4850) 642 (5682) 175 (1200) 207 (3000) 224 (3250)
SYMKR290 291 (17,8) 210 256 61 (16) 76 (20) 526 (4655) 664 (5876) 138 (2000) 190 (2750) 207 (3000)
SYMKR315 322 (19,6) 188 235 61 (16) 76 (20) 518 (4584) 690 (6106) 121 (1750) 172 (2500) 190 (2750)
SYMKR400 400 (24,4) 152 190 61 (16) 76 (20) 551 (4873) 698 (6177) 104 (1500) 138 (2000) 155 (2250)
A Length / Weight
electric
SYMKR025 132.4 (5.21) 5.2 (11.46)
SYMKR032 133.4 (5.25) 5.3 (11.68)
SYMKR040 134.4 (5.29) 5.4 (11.90)
SYMKR050 134.4 (5.29) 6.0 (13.23)
SYMKR060 136.4 (5.37) 6.0 (13.23)
SYMKR080 138.4 (5.45) 6.1 (13.45)
SYMKR100 140.9 (5.55) 6.2 (13.67)
SYMKR125 142.4 (5.61) 6.3 (13.89)
SYMKR160 148.9 (5.86) 6.4 (14.11)
diesel
SYMKR200 153.9 (6.06) 6.6 (14.55)
SYMKR250 160.4 (6.31) 6.8 (14.99)
SYMKR315 168.9 (6.65) 7.1 (15.65)
SYMKR400 180.0 (7.09) 7.4 (16.31)
Services
appendices
www.symko.fr
KS category
Code
SYMKS080 79 [4.78] 870 1060 61 [16] 68 [18] 207 [1832] 286 [2528] 207 [3000] 276 [4000] 276 [4000]
SYMKS100 100 [6.10] 745 880 76 [20] 95 [25] 280 [2475] 416 [3680] 207 [3000] 310 [4500] 310 [4500]
SYMKS110 112 [6.85] 675 840 76 [20] 95 [25] 307 [2715] 468 [4145] 207 [3000] 310 [4500] 310 [4500]
SYMKS125 129 [7.86] 580 730 76 [20] 95 [25] 370 [3275] 550 [4865] 207 [3000] 310 [4500] 310 [4500]
SYMKS160 162 [9.90] 465 700 76 [20] 114 [30] 462 [4090] 618 [5465] 207 [3000] 276 [4000] 310 [4500]
SYMKS200 202 [12.31] 375 560 76 [20] 114 [30] 576 [5100] 768 [6795] 207 [3000] 276 [4000] 310 [4500]
SYMKS250 228 [13.92] 325 490 76 [20] 114 [30] 642 [5685] 806 [7135] 207 [3000] 276 [4000] 310 [4500]
SYMKS315 325 [19.81] 235 350 76 [20] 114 [30] 789 [6980] 1029 [9105] 190 [2750] 224 [3250] 259 [3750]
SYMKS400 399 [24.36] 190 280 76 [20] 114 [30] 816 [7225] 1034 [9150] 155 [2250] 190 [2750] 224 [3250]
SYMKS500 496 [30.29] 155 230 76 [20] 114 [30] 824 [7295] 1041 [9210] 121 [1750] 155 [2250] 172 [2500]
4-Hole SAE A Mount
A
A
Length / Weight
6 [.25] 20 [.79] Max.
109 [4.28] Max.

SYMKS080 185 [7.27] 11.3 [24.9]
SYMKS100 185 [7.27] 11.3 [24.9]
82,6 [3.250]
82,4 [3.245] SYMKS110 187 [7.36] 11.4 [25.1]
13,8 [.545]
13,3 [.525] SYMKS125 190 [7.49] 11.5 [25.3]
SYMKS160 197 [7.74] 11.8 [26.0]
106,4 [4.188]
22 [.87]
22 [.85] SYMKS200 204 [8.04] 12.2 [26.8]
.70
SYMKS250 210 [8.28] 12.6 [27.7]
SYMKS315 228 [8.99] 13.5 [29.7]
32mm Straight
*65 [2.54]
Mounting
Flange
1/2” BSP.F Offset Manifold with 1/4” Drain Port
SYMKS400 228 [8.99] 13.5 [29.7]
56 [2.22] Max.
45.2 [1.78]
22[.87] 28 [1.10]
Drain
SYMKS500 244 [9.60] 14.2 [31.2]
10.0 [.394] 44.7 [1.76]
6.9 [.27]
10.0 [.392]
4.6 [.18]
21 [.83]
A
32.0 [1.261] A
32.0 [1.260]
32 [1.26]
M8 x 1.25 - 6H B
23 [.90] Deep Min.
B
35.0 [1.38]
34.8 [1.37]
42 [1.66] 16 [.63]
(2) M10 x 1.5

5 [.19]
32 [1.26]
www.symko.fr
/ Gear motors
Hydraulic
BOSCH / REXROTH
BBThe counter-bearing is recommended for driving the pump
by belt or chain (radial loads).
BBMotor with counter-bearing and external drain for both
directions of rotation.
BBMotor equipped with a counter-bearing and without drain
Mechanical
for one direction of rotation.
BBTapered shaft 1/5. German fixation.
Bidirectionnal motors with external drain

Max Center Backflow
Bidirectionnal Displacement Torque Max rpm
Pressure distance center
reference (cm³) (M.Nm) (tr/min)
(bar) suction distance
0 511 345 601S 5.5 250 16.9 4000 35 35
electric
0 511 445 601S 8 250 24.5 4000 35 35
0 511 545 601S 11 250 33.9 3500 35 35
0 511 645 601S 16 250 49.5 3000 35 35
0 511 645 603S 19 210 50.4 3000 35 35
Unidirectionnal motors without external drain
diesel
Max Center Backflow
Left port Right port Displacement Torque Max rpm
Pressure distance center
reference reference (cm³) (M.Nm) (tr/min)
(bar) suction distance
0 511 445 300S 0 511 445 001S 8 250 24.5 4000 40 35
0 511 545 300S 0 511 545 001S 11 250 33.9 3500 40 35
0 511 645 300S 0 511 645 001S 16 250 49.5 3000 40 35
0 511 645 302S 0 511 645 004S 19 210 50.4 3000 40 35
0 511 745 300S 0 511 745 001S 22.5 210 59.9 3000 40 35
Services
appendices
www.symko.fr
Turolla
BBSingle or bidirectional motor (depending on your use).
BBStandard Italian fixation.
Bidirectionnal Displacement Max Pressure Max rpm

A B C D E c e e
reference (cm³) (bar) (tr/min)
SEM2-6/COO1S 6 210 4000 45 93.5 13.5 30 M6 13.5 30 M6
SEM2-8/COO1S 8 210 4000 45 97.5 13.5 30 M6 13.5 30 M6
SEM2-11/COO1S 11 210 4000 49 101.5 13.5 30 M6 13.5 30 M6
SEM2-14/COO1S 14 210 4000 52 107.5 20 40 M8 20 40 M8
SEM2-17/COO1S 17 210 4000 52 111.5 20 40 M8 20 40 M8
SEM2-19/COO1S 19 210 3500 56 115.5 20 40 M8 20 40 M8
SEM2-22/COO1S 22 180 3500 59 121.5 20 40 M8 20 40 M8
SEM2-25/COO1S 25 160 3500 59 125.5 23.5 40 M8 23.5 40 M8
NOTE
i Other models without
counter-bearing in conical shaft, fluted or
screwdriver
www.symko.fr
bONDIOLI
L series, aluminium body >
Hydraulic
The HPL series with aluminum body is used
in a wide range of applications thanks to its
flexibility and the numerous possibilities of G series, cast iron body >
personalisation. The HPG series, with its cast iron body, is used in
more severe applications. HPG pumps can be
HLP M MOTORS - HLP P PUMPS
paired to form multiple pumps.
Pressure Rpm
Displacement
Gpe Type Continue Max Min
(cm3) Peak (bar)
Mechanical
(bar) (min-1) (min-1) HPG M MOTORS - HPG P PUMPS
19 1,9 220 280
Pressure Rpm
24 2,53 210 260 Displacement
Gpe Type Continue Max Min
31 3,17 210 260 (cm3) Peak (bar)
4000 (bar) (min-1) (min-1)
36 3,73 210 260
5 4,5 270 320
1 44 4,35 210 260 700
6 6 270 320 3500
48 4,97 210 260
8 8,5 270 320
60 6,08 210 260
11 11 250 300
70 7 190 230 3500 2 500
14 14,5 250 300
80 7,87 160 200 3000
17 17 250 280
5 4,5 240 300
20 19,5 210 250
6 6 240 300
26 26 180 210 2500
electric
8 8,5 230 280
22 21,5 280 310
11 11 230 280 4000
2 700 26 26 280 310
14 14,5 230 280
31 30,5 260 300
17 17 230 280 3000
36 36 260 300
20 19,5 200 250
41 41,5 260 280
26 26 180 210 3400 3 500
47 46,5 250 280
22 21,5 220 310
51 50,5 240 270
26 26 210 300 2750
56 55,5 220 250
31 30,5 210 280
61 61 200 220
36 36 210 280 3500 700 2500
73 72 190 220
41 41,5 210 280
3 50 50 270 310
47 46,5 180 270
diesel
63 63 270 310
51 50,5 180 270 3000
4 71 71 250 300 500
56 55,5 170 230
80 80,5 230 300
61 61 150 200 3000 600
90 90,5 210 280 2700
73 72 140 180
41 41,5 220 300
51 50,5 190 280
4 61 61 160 200 2800 600
73 72 150 180
90 88 120 170
Services
appendices
NOTE
i HPL and HPG pumps can be paired to form multiple
pumps. For more details: contact us
www.symko.fr
MUST series >
MUST for: Modular, Universal, Silent and Technological.
Modular because it allows to combine combining standard and silent
pumps in both aluminium and universal cast iron: thanks to the use of
bases and accessories of the HPL and HPG range: shafts, flanges, valves, etc.
HPZ PUMPS HPX PUMPS
Pressure Rpm Rated Pressure Rpm
Displacement displacement
Gpe Type Continue Peak Max Min Type Continue Peak Max Min
(cm3)
bar psi bar psi (min-1) (min-1) cm3 in3 bar psi bar psi min-1 min-1
6 6,1 240 3481 300 4351 6 6,1 0,37 270 3916 320 4641
3500 3500
9 9 230 3336 280 4061 9 9 0,55 270 3916 320 4641
11 11,5 230 3336 280 4061 11 11,5 0,7 250 3626 300 4351
2 14 14,2 230 3336 280 4061 700 14 14,2 0,87 250 3626 300 4351 500
3000 3000
17 17 230 3336 280 4061 17 17 1,04 250 3626 280 4061
21 21,3 200 2901 250 3626 21 21,3 1,3 210 3046 250 3626
26 25,6 180 2611 210 3046 2500 26 25,6 1,56 180 2611 210 3046 2500
www.symko.fr
/ Steering units
Hydraulic
Steering units
Standard Pressure Displacement
Steering unit type Technical caracteristics
equivalent bar cm3
OSPB ON, OR, LS, LSR, CN 210 50-1,000 without valve and limiter
OSPC ON, OR, LS, LSR, CN 210 40-500 with valve and limiter integrated
OSPF LS, LSR 210 40-400 rapid response
Mechanical
OSPD ON, OR, LS, LSR 210 60/120-125/440 double displacement
Reference Designation
OSPQ LS, LSR 210 58/125-116/500 with flow amplifier
OSPL LS, CN 240 520-1,200 large displacement 150-0179S JOHN DEERE
OSQ LS 210 1,000-4,000 flow amplifier 150-1155S NEW HOLLAND
150N1261S NH
NOTE 150N1217S SAME
i Contact us
150N1211S
150N1298S
MASSEY FERGUSON
CASE IH
Seals kits
electric
Reference Designation
150N4040S OSPB/OSPC Seals kits for Danfoss motors

152B4000S OLS and steering units
152-4055S OVP SYMMALLETTEKJN1
/ Piston engines
diesel
Bosch Rexroth fixed A2FM
Services
Size 5 10 12 16 23 28 32 45 56 63 80
Displacement Vg cm3 4.93 10.3 12 16 22.9 28.1 32 45.6 56.1 63 80.4
Max rpm nnorm rpm 10000 8000 8000 8000 6300 6300 6300 5600 5000 5000 4500
Flow rate nnorm qVmax l/min 49 82 96 128 144 177 202 255 281 315 362
appendices
ΔP=315 bar T Nm 24.7 - - - - - - - - - -

Torque
ΔP=400 bar T Nm - 66 76 102 146 179 204 290 357 401 512
Weight m kg 2.5 5.4 5.4 5.4 9.5 9.5 9.5 13.5 18 18 23
Size 90 107 125 160 180 200 250 355 500 710 1000
Displacement Vg cm3 90 106.7 125 160.4 180 200 250 355 500 710 1000
Max rpm nnorm rpm 4550 4000 4000 3600 3600 2750 2700 2240 2000 1600 1600
Flow rate nnorm qVmax l/min 405 427 500 577 648 550 675 795 1000 1136 1600
ΔP=315 bar T Nm 501 594 696 893 1003 1114 1393 1978 2785 3955 5570
Torque
ΔP=400 bar T Nm 573 679 796 1021 1146 1273 - - - - -
Weight m kg 23 32 32 45 45 66 73 110 155 325 336
www.symko.fr
Bondioli – M4MF fixed displacement
Fixed-displacement axial piston motors >

Theoretical displacement Pressure Rpm
Type
Continuous Peak Max Min
cm3 in3 bar psi bar psi min-1 min-1

21 1.28 250 3625 350 3335
M4 MF 28 1,71 250 3625 350 3335 3800 500
37 2,26 250 3625 350 3335
34 2.08 250 3625 400 3335
46 2,81 250 3625 400 3335
M4 MF 50 3,05 250 3625 400 3335 3800 500
58 3,54 250 3625 400 3335
65 3,97 250 3625 350 3335
Bondioli – M4MV variable displacement
Variable-displacement axial piston motors >

Theoretical displacement Pressure Rpm
Type
Continuous Peak Max Min
cm3 in3 bar psi bar psi min-1 min-1

34 2,08 250 3625 400 5800
46 2,81 250 3625 400 5800
M4 MV 50 3,05 250 3625 400 5800 4000 500
58 3,54 250 3625 400 5800
65 3,97 250 3625 350 5075
NOTE
i For hydrostatic transmission:
Contact us.
www.symko.fr
3 . valves
/ Rexroth valve parts
Tractors
Hydraulic
Brands Tractors Ref. origin Type of valve
AGCO Fendt Serie 300 G339.960.020.013 SB23-M
AGCO Fendt Serie 700, 800, 900 G916.961.022.021 SB23-EHS
AGCO Fendt Serie 700, 800, 900 G737.960.020.030 SB23-EHS
AGCO Fendt Serie 800, 900 G931.962.020.307 SB33-EHS
AGCO Fendt Serie 700, 800, 900 G737.960.030.010 EHR33-EHS
Case, Steyr Serie MAXXUM 87305400 SB33-EHS
Case, Steyr, (Rigitrac) Serie MAXXUM 84242996, 1-32-573-430 SB23-EHS
Mechanical
Case, Steyr, (Rigitrac) Serie MAXXUM 84242998, 1-32-573-431 SB23-EHS
John Deere Serie 7000, 8000, 9000 RE260572 SB33-EHS
Massey Ferguson Serie 6200/6400/7400/8200/8400 3797234H6 SB23-EHS
Massey Ferguson Serie 6200/6400/7400/8200/8400 3796941H6 SB23-M
New Holland, Case Serie T7, MAXXUM 87526168 SB23-M
New Holland, Case Serie T6, PUMA 87546169 SB23-M
New Holland, Case Serie T7, MAXXUM 87313431 SB23-M
New Holland, Case Serie T6, PUMA 87328572 SB23-M
New Holland, Case Serie T7/T6, MAXXUM/PUMA 84125295 SB23-EHS
New Holland, Case Serie T7/T6, MAXXUM/PUMA 84244163 SB12-EHS
Same Deutz Fahr Serie 5, 6, 7 4455074 SB23-EHS
electric
NOTE
i Spare parts: Contact us
diesel
Services
appendices
www.symko.fr
3 . valves
/ Monoblock directional control valves
NOTE
i Remote controls - Page 70
Type mb35
BBOperating-flow: 35 L/Min. BBConnections in 3/8 Gaz.
BBMaximum pressure: 300 bar. BBPossibility of up to 6 elements.
BBPredisposition for center to follow. BBStandard calibration: 180 bar.
Number of
Serration for each element Slide-valve for each element
elements
1 A = spring return to center 1 = Dual effect A and B to T (motor)
2 B = 1 position by pushing 4 = Simple effect P and T blocked
3 C = 1 position by pulling 3 = Dual effect P and T blocked
SYMMB35
4 D = 3 positions 7 = Dual effect floating position
5
6
Example for a 3-element valve: SYMMB35 3 A 3 C 4 B 1

1st element 2nd element 3rd element
1st element Spring return to center Dual effect A and B to T (motor)

2nd element 1 position by pulling Simple effect P and T blocked
3th element 1 position by pushing Dual effect P and T blocked
Options: Reference
SYMBMCO 1/4 Cap center to follow
SYMBMCF 1/4 Cap closed center
Type mb85
BBOperating-flow: 85 L/Min. BBConnections in 3/8 Gaz.
BBPredisposition for center to follow.. BBStandard calibration: 180 bar.
Number of
Serration for each element Slide-valve for each element
elements
1 A = spring return to center 1 = Dualeffect P and T blocked
2 B = 1 position by pushing 4 = Simple effect P and T blocked
3 C = 1 position by pulling 3 = Dual effect P and T blocked
SYMMB85
5
6
Example for a 4-element valve: SYMMB85 4 A 4 C 4 B 1 D 7

1 element
st
2 nd
element 3 element
rd
4 element
th
1st element Spring return to center Simple effect P and T blocked

3rd element 1 position by pushing Dual effect P and T blocked
4th element 3 positions Dual effect floating position
Options: Reference
SYMBMCO 3/8 Cap center to follow
SYMBMCF 3/8 Cap closed center
www.symko.fr
3 . valves
/ Dual effect valves for
log splitter
Hydraulic
Max pressure 250 bar >
Number of
Reference Flow Rate Orifice Option
elements
SYMDFEND45 45 L/Min 1 3/8 Gaz Mechanical end stop

SYMDFEND85 85 L/Min 1 3/4 Gaz Mechanical end stop
SYMDFENDDV50 50 L/Min 1 3/8 Gaz Mechanical end stop + double speed of descent
Mechanical
SYMDFENDDV80 80 L/Min 1 3/4 Gaz Mechanical end stop + double speed of descent
NOTE
i Serration for lifting + Mechanical end stop
Double speed of descent
/ Modular directional control valves
electric
type ch50
BBNominal flow: 50 L/Min. BBAdjustable pressure limiter (50 to 300 bar).
BBConnections in 1/2 G for P and T. BBStandard calibration: 180 bar.
BBConnections in 3/8 G for A and B.
diesel
Number of
Serrattion for each element Slide-valve for each element Output elements
elements
1 A = spring return to center 1 = Dual effect P and T blocked S = standard
2 B = 1 position by pushing 4 = Simple effect P and T blocked SCS = center to follow
3 C = 1 position by pulling 3 = Dual effet A and B to T (motor) SCF = closed center
SYMCH50
5
6
Example for a 3-element valve: SYMCH50 3 A 4 C 4 B 1 S C S
Services
1 element
st
2 nd
element 3 element
rd
1st element Spring return to center Simple effect P and T blocked

3rd element 1 position by pushing Dual effect P and T blocked
SCS = center to follow
appendices
Additional possibilities:
BBSection with adjustable flow regulator: ERD type.
BBSection recovering excess flow: ESR type.
NOTE
BBSection floating position: FC4 type (brush cutter).
i CH50 valve with cable, electric or
BBSection with adjustable anti-shock valve: VAC type. pneumatic controls: Contact us
www.symko.fr
3 . valves
/ Bondioli valves
Monoblock directional control valves
Number of slide- Operating-flow Nominal pressure.

valves l/min gpm bar psi
MD1 1 35 9,20 250 3626
MDT 2/7 35 9,50 250 3625
ML 1/7 35 9,20 250 3625
DN 1/6 45 11,90 300 4350
DNS 2/6 45 11,90 300 4350
DN85 1/6 90 23,80 250 3626
DL 1 140 37,00 180 2610
DN120 2/4 120 31,70 250 3625
DN46CV 2 45 11,90 250 3625
DN46FC 2 45 11,90 250 3625
DN90FC 2 90 23,80 250 3625
NOTE
i Remote controls – Page 70
Modular directional control valves

Number of slide- Operating-flow Nominal pressure.
valves l/min gpm bar psi
DNC35 1-8 40 10,60 250 3625
DNC65 1-8 70 18,50 250 3625
DNC75 1-8 60 15,90 300 4350
DNC90 1-8 90 23,70 210 3045
DNC130 1-6 130 34,40 300 4350
LSC90* 1-8 100 24,40 250 3625
*Load detection
NOTE
i Remote controls – Page 70
www.symko.fr
3 . valves
/ Electrically controlled valves
Hydraulic
vavles
NG6 - Cetop 3 - 12 Vcc NG 10 - Cetop 5 - 12 Vcc
P = 315 bar P = 315 bar
max flow rate = 60l/mn max flow rate = 90l/mn
Pattern N° Symbol References

000 SYM200 SYM707
Mechanical
001 SYM202 SYM714
12V DC (other voltage
002 SYM206 SYM723 please contact us).
Assembly on standar-
004 SYM211 SYM730
dised housing: CETOP 3
010 SYM221 SYM747 and CETOP 5
012 SYM226 SYM759
033 SYM252 SYM803
electric
014 SYM232 SYM766
016 SYM236 SYM771
027 SYM247 SYM797
068 SYM265 SYM824
Housings
diesel
Nombre of NG6 with NG6 without NG10 with NG10 swithout
positions pressure limiter pressure limiter pressure limiter pressure limiter
1 SYM153 SYM903 SYM168 SYM870

5 SYM157 SYM907 SYM164 SYM874 BBFlat connectors
6 SYM158 SYM908 SYM165 SYM875 Size: NG04 to NG10
Services
7 SYM159 SYM909 SYM166 SYM876 Pressure (bar): Up to 350
8 SYM160 SYM910 SYM167 SYM877 Flow rate (l/min): Up to 140
NG6 multiple housings with pressure limiter

Orifices
P and T A and B
appendices
G 1/2" G 3/8"
NG10 multiple housings with pressure limiter

Orifices
P and T A and B
G 3/4" G 1/2"
www.symko.fr
3 . valves
/ Selector valves
6-way selector vale – 2 positions dual effect
BBElectrically operated valve for controlling 2 dual effect cylinders from a dual-effect
hand-operated valve.
BBStandard 12 volt coil (for 24 Volts - please specify).
Max Max
Reference Orifices
flow rate (l/mn) pressure (bar)
SYMSC6/2/38-12V 40 250 3/8G
SYMSC6/2/12-12V 70 250 1/2G
8-way selector valve – 3 positions dual effect

BBElectrically operated valve for controlling 3 double acting cylinders from a dual-effect
hand-operated valve.
BBStandard 12 volt coil (for 24 Volts - please specify).
Max Max
Reference Orifices
flow rate (l/mn) pressure (bar)
SYMSC8/3/38-12V 40 250 3/8G
SYMSC8/3/12-12V 70 250 1/2G
/ Solenoid valves
Solenoid valves 2-way valve
Orifice
Reference
(BSP)
BBMaximum pressure: 250 bar.

SYMEVCNO1412 1/4
BBThreaded aluminium body.

SYMEVCNF1412 1/4
BBUsed for locking cylinders.

SYMEVCNO3812 3/8
BBSupplied complete with coil and connector.

SYMEVCNF3812 3/8
BBVoltage: 12volts/CC (24volts/CC on demand).

SYMEVCNO1212 1/2
SYMEVCNF1212 1/2
SYMEVCNO3412 3/4
NF NO
SYMEVCNF3412 3/4
www.symko.fr
3 . valves
/ PVG32 valves / Solenoids
Hydraulic
Proportional valves PVG32
BBUse: brush cutter, pruner, etc.
BBModular valve up to 10 elements.
BBEach proportional distribution element provides both
directional control of movement and speed control regardless
of load conditions.
BBIntegrated pressure limiter.
Mechanical
BBMax flow: 100 L/min per element.
BBMax pressure: 300 bar.
BBBack pressure acceptable on the return: 10 bar.
BBThese valves can be, on demand, equipped with:
- Load sensing system (L.S) or open circuit. - On/Off and proportional solenoids
- Electrical control: 12 or 24 Vcc or hydraulic BP. depending on the functions. (See types of
- Anti-shock and anti-cavitation valve, solenoids below)
according to use.
- Floating position.
electric
Solenoids
NOTE
BBTypes of solenoids in 12 or
24 Vcc or 11 to 32 Vcc.
i PVG solenoids for Valtra assembly:
contact us
diesel
Reference Electric type Voltage Connector type Function Error detection
157B4216S T.O.R 12 V Hirschmann Standard No
157B4228S T.O.R 24 V Hirschmann Standard No
157B4901S T.O.R 12 V AMP Standard No
157B4902S T.O.R 24 V AMP Standard No
157B4116S PVEM 12 V Hirschmann Standard No
157B4128S PVEM 24 V Hirschmann Standard No
157B4416S PVEM 12 V Hirschmann Floating position No
157B4428S PVEM 24 V Hirschmann Floating position No
157B4734S PVEA 11 to 32 V AMP Standard Active
Services
157B4735S PVEA 11 to 32 V AMP Standard Passive
157B4736S PVEA-DI 11 to 32 V AMP Standard Active
157B4737S PVEA-DI 11 to 32 V AMP Standard Passive
157B4032S PVEH 11 to 32 V Hirschmann Standard Active
157B4033S PVEH 11 to 32 V Hirschmann Standard Passive
157B4332S PVEH 11 to 32 V Hirschmann Floating position Active
157B4034S PVEH 11 to 32 V AMP Standard Active
157B4035S PVEH 11 to 32 V AMP Standard Passive
157B4036S PVEH-DI 11 to 32 V AMP Standard Active
157B4037S PVEH-DI 11 to 32 V AMP Standard Passive
appendices
157B4832S PVES 11 to 32 V Hirschmann 0% hysteresis Active

157B4833S PVES 11 to 32 V Hirschmann 0% hysteresis Passive
157B4834S PVES 11 to 32 V AMP 0% hysteresis Active
157B4835S PVES 11 to 32 V AMP 0% hysteresis Passive
Caption
T.O.R: ON/OFF PVEH: P
roportional High Performance Passive: Error detection signals the error,
PVEM: Proportional Medium with error monitoring but doesn’t stop the machine or
PVEA: P roportional Medium with error PVEH-DI: P roportional High Performance engine
monitoring with error monitoring and
PVEA-DI: P roportional Medium with error directional indicator
monitoring and directional Active: Error detection stops the machine
indicator or the engine
www.symko.fr
3 . valves
/ Valves controls
Simple or dual controls
Simple Dual Compatible
Reference Picture
control control with Bondioli
SYMCS - - fig. 1
SYMCSB - fig. 3
SYMCD - - fig. 2
SYMCDB -- fig. 4
SYMCD1BP - fig. 5
Fig.1 Fig.2 Fig.3 Fig.4 Fig.5
Cable control
Reference Length (m) Picture
SYMCC 100 1 fig.1
SYMCC 100B 1 fig.2
SYMCC 150 1.5 fig.1
SYMCC 150B 1.5 fig.2
SYMCC 200 2 fig.1
SYMCC 200B 2 fig.2
SYMCC 250 2.5 fig.1
SYMCC 250B 2.5 fig.2

Fig.1 Fig.2
SYMCC 300 3 fig.1
SYMCC 300B 3 fig.2
Cable mounting sleeve
NOTE
i Mounting sleeve: Contact us
www.symko.fr
4 . Cylinders
/ Single-acting cylinders
Hydraulic
Thrust power
Tonne 7,5 70
Ø A: 45 to 60 >
7
Ø A (mm)
Mechanical
6,5
Course stroke Vol. Weight
Ref. ØA E C D G H J O P 6
hub: Z (mm) (l) (kg)
5,5 60
SYMVSE25100 100 190 14 14.2 40 24 40 - - 0.08 1.5
5
SYMVSE25200 25 200 290 14 14.2 40 24 40 - - 0.15 2.3 55
4,5
SYMVSE25300 300 390 14 14.2 40 24 40 - - 0.25 3
4 50
SYMVSE30200 200 300 18 16.2 50 26 42 - - 0.25 3.6
SYMVSE30300 300 400 18 16.2 50 26 42 - - 0.35 4.8 3,5
SYMVSE30400 30 400 500 18 16.2 50 26 42 - - 0.45 5.9 3 45
SYMVSE30550 550 650 18 16.2 50 26 42 - - 0.65 7.5 2,5 40
SYMVSE30700 700 800 18 16.2 50 26 42 - - 0.8 9.2 2
electric
SYMVSE40200 200 330 22 23 60 32 47 - - 0.4 5.9 1,5 30
SYMVSE40300 300 430 22 23 60 32 47 - - 0.6 7.7
1 25
SYMVSE40400 40 400 530 22 23 60 32 47 - - 0.8 9.3
0,5
SYMVSE40550 550 680 22 23 60 32 47 - - 1.1 11.8
0
SYMVSE40700 700 830 22 23 60 32 47 - - 1.4 14.2 50 100 150 200 P (bar)
diesel
Ø A: 45 to 60 >
Ref. ØA E C D G H J O P
Services
SYMVSE45200 200 330 22 23 60 34 47 70 77 0.4 7
SYMVSE45300 300 430 22 23 60 34 47 70 77 0.6 8.9
SYMVSE45400 45 400 530 22 23 60 34 47 70 77 0.8 10.9
SYMVSE45550 550 680 22 23 60 34 47 70 77 1.1 13.8
SYMVSE45700 700 830 22 23 60 34 47 70 77 1.4 16.6
SYMVSE50200 200 360 25 25.5 65 49 50 75 80 0.5 9
SYMVSE50300 300 460 25 25.5 65 49 50 75 80 0.7 11.2
SYMVSE50400 50 400 560 25 25.5 65 49 50 75 80 0.95 13.5
SYMVSE50550 550 710 25 25.5 65 49 50 75 80 1.3 16.9
appendices
SYMVSE50700 700 860 25 25.5 65 49 50 75 80 1.65 20.3

SYMVSE55300 300 460 25 25.5 70 41 50 85 95 0.85 13.5
SYMVSE55550 55 550 710 25 25.5 70 41 50 85 95 1.55 20.2
SYMVSE55700 700 860 25 25.5 70 41 50 85 95 2 24.1
SYMVSE60200 200 360 25 25.5 75 36 50 90 95 0.65 12.7
SYMVSE60300 300 460 25 25.5 75 36 50 90 95 1 15.7
SYMVSE60400 60 400 560 25 25.5 75 36 50 90 95 1.35 18.6
SYMVSE60550 550 710 25 25.5 75 36 50 90 95 1.85 23.4
SYMVSE60700 700 860 25 25.5 75 36 50 90 95 2.35 28
SYMVSE70300 300 509 30 30.25 85 66 55 100 95 1.35 22.5
SYMVSE70400 70 400 609 30 30.25 85 66 55 100 95 1.75 26.5
SYMVSE70550 550 709 30 30.25 85 66 55 100 95 2.15 30.5
www.symko.fr
4 . Cylinders
/ Double-acting cylinders Tonne 7,5
Thrust power
70
7
Ø A (mm)
6,5
5,5 60
5
55
4,5
4 50
3,5
3 45
2,5 40
1,5 30
1 25
0,5
0
50 100 150 200 P (bar)

Ref. ØA ØB E C D F G H I J K L M
SYMVDE203250 50 205 14 16.2 35 40 28 30 30 35 13 1/4 0.05 1.7
SYMVDE2032100 100 255 14 16.2 35 40 28 30 30 35 13 1/4 0.1 2
SYMVDE2032150 150 305 14 16.2 35 40 28 30 30 35 13 1/4 0.13 2.3
SYMVDE2032200 200 355 14 16.2 35 40 28 30 30 35 13 1/4 0.17 2.6
SYMVDE2032300 20 32 300 455 14 16.2 35 40 28 30 30 35 13 1/4 0.25 3.2
SYMVDE2032400 400 555 14 16.2 35 40 28 30 30 35 13 1/4 0.32 3.6
SYMVDE2032500 500 655 14 16.2 35 40 28 30 30 35 13 1/4 0.4 4.2
SYMVDE2032600 600 755 14 16.2 35 40 28 30 30 35 13 1/4 0.48 4.8
SYMVDE2032700 700 855 14 16.2 35 40 28 30 30 35 13 1/4 0.56 5.3
SYMVDE2540100 100 270 18 20.25 40 50 65 35 38 40 15 3/8 0.15 2.9
SYMVDE2540200 200 370 18 20.25 40 50 65 35 38 40 15 3/8 0.25 3.8
SYMVDE2540300 300 470 18 20.25 40 50 65 35 38 40 15 3/8 0.4 4.8
SYMVDE2540400 400 570 18 20.25 40 50 65 35 38 40 15 3/8 0.5 5.7
SYMVDE2540500 25 40 500 670 18 20.25 40 50 65 35 38 40 15 3/8 0.65 6.6
SYMVDE2540600 600 770 18 20.25 40 50 65 35 38 40 15 3/8 0.75 7.6
SYMVDE2540700 700 870 18 20.25 40 50 65 35 38 40 15 3/8 0.88 9
SYMVDE2540800 800 970 18 20.25 40 50 65 35 38 40 15 3/8 1 9.5
SYMVDE25401000 1000 1170 18 20.25 40 50 65 35 38 40 15 3/8 1.25 11
SYMVDE3050100 100 300 22 25.25 45 60 85 40 42 43 15 3/8 0.2 4.4
SYMVDE3050150 150 350 22 25.25 45 60 85 40 42 43 15 3/8 0.3 4.7
SYMVDE3050200 200 400 22 25.25 45 60 85 40 42 43 15 3/8 0.4 5.7
SYMVDE3050300 300 500 22 25.25 45 60 85 40 42 43 15 3/8 0.6 6.9
SYMVDE3050400 400 600 22 25.25 45 60 85 40 42 43 15 3/8 0.8 8.1
SYMVDE3050500 30 50 500 700 22 25.25 45 60 85 40 42 43 15 3/8 1 9.3
SYMVDE3050600 600 800 22 25.25 45 60 85 40 42 43 15 3/8 1.2 10.6
SYMVDE3050700 700 900 22 25.25 45 60 85 40 42 43 15 3/8 1.4 11.9
SYMVDE3050800 800 1000 22 25.25 45 60 85 40 42 43 15 3/8 1.57 13.2
SYMVDE3050900 900 1100 22 25.25 45 60 85 40 42 43 15 3/8 1.78 15
SYMVDE30501000 1000 1200 22 25.25 45 60 85 40 42 43 15 3/8 2 15.4
SYMVDE3060100 100 300 22 25.25 45 70 83 40 42 45 15 3/8 0.3 5.5
SYMVDE3060200 200 400 22 25.25 45 70 83 40 42 45 15 3/8 0.6 6.9
SYMVDE3060300 300 500 22 25.25 45 70 83 40 42 45 15 3/8 0.9 8.2
SYMVDE3060400 30 60 400 600 22 25.25 45 70 83 40 42 45 15 3/8 1.15 9.6
SYMVDE3060500 500 700 22 25.25 45 70 83 40 42 45 15 3/8 1.45 11
SYMVDE3060600 600 800 22 25.25 45 70 83 40 42 45 15 3/8 1.75 12.2
SYMVDE3060700 700 900 22 25.25 45 70 83 40 42 45 15 3/8 2 13.6
SYMVDE4070200 200 410 28 30.25 55 80 82 50 47 49 15 3/8 0.85 10
SYMVDE4070300 300 510 28 30.25 55 80 82 50 47 49 15 3/8 1.2 12
SYMVDE4070400 400 610 28 30.25 55 80 82 50 47 49 15 3/8 1.6 14
SYMVDE4070500 500 710 28 30.25 55 80 82 50 47 49 15 3/8 2 16
40 70
SYMVDE4070600 600 810 28 30.25 55 80 82 50 47 49 15 3/8 2.35 18
SYMVDE4070700 700 910 28 30.25 55 80 82 50 47 49 15 3/8 2.75 20
SYMVDE4070800 800 1010 28 30.25 55 80 82 50 47 49 15 3/8 3 23
SYMVDE40701000 1000 1210 28 30.25 55 80 82 50 47 49 15 3/8 3.84 26
www.symko.fr
4 . Cylinders
Ref. ØA ØB E C D F G H I J K L M
SYMVDE4080200 200 410 28 30.25 55 90 70 50 47 54 15 3/8 1.1 12.3
Hydraulic
SYMVDE4080300 300 510 28 30.25 55 90 70 50 47 54 15 3/8 1.6 14.1
SYMVDE4080400 400 610 28 30.25 55 90 70 50 47 54 15 3/8 2.1 16.3
40 80
SYMVDE4080500 500 710 28 30.25 55 90 70 50 47 54 15 3/8 2.6 18.4
SYMVDE4080600 600 810 28 30.25 55 90 70 50 47 54 15 3/8 3.1 20.3
SYMVDE4080700 700 910 28 30.25 55 90 70 50 47 54 15 3/8 3.6 22.5
SYMVDE50100300 300 525 28 30.25 70 115 75 60 47 60 20 1/2 2.5 25
SYMVDE50100400 400 625 28 30.25 70 115 75 60 47 60 20 1/2 3.3 28.5
SYMVDE50100500 50 100 500 725 28 30.25 70 115 75 60 47 60 20 1/2 4.1 32
SYMVDE50100700 700 925 28 30.25 70 115 75 60 47 60 20 1/2 5.65 39.1
SYMVDE50100900 900 1125 28 30.25 70 115 75 60 47 60 20 1/2 7.25 46.1
SYMVDE70120500 500 770 40 40.5 80 140 55 80 65 82 20 1/2 5.9 60
Mechanical
70 120
SYMVDE701201000 1000 1270 40 40.5 80 140 55 80 65 82 20 1/2 11.55 90
/ Double-acting cylinders
without any fittings
electric
diesel
Type Thrust force Traction force Dimensions
Course
Ref. stroke
(mm)
Ø A Ø B 180 Bar D H J K L
SYMVDE20350100NU 100 230
Services
SYMVDE20350150NU 150 280
SYMVDE20350200NU 200 330
SYMVDE20350250NU 250 380
SYMVDE20350300NU 20 35 1T 732 1T 166 300 430 45 30 49 21
SYMVDE20350350NU 350 480
SYMVDE20350400NU 400 530
SYMVDE20350450NU 450 580
SYMVDE20350500NU 500 630
SYMVDE25400100NU 100 230
appendices
SYMVDE25400150NU 150 280

SYMVDE25400200NU 200 330
SYMVDE25400250NU 250 380
SYMVDE25400300NU 300 430
SYMVDE25400350NU 25 40 2T 262 1T 378 350 480 50 28 32 19
SYMVDE25400400NU 400 530
SYMVDE25400450NU 450 580
SYMVDE25400500NU 500 630
SYMVDE25400550NU 550 680
SYMVDE25400600NU 600 730
www.symko.fr
4 . Cylinders

Course
Ref. stroke
(mm)
SYMVDE30500100NU 100 240

SYMVDE30500150NU 150 290
SYMVDE30500200NU 200 340
SYMVDE30500250NU 250 390
SYMVDE30500300NU 300 440
SYMVDE30500350NU 350 490
SYMVDE30500400NU 400 540
SYMVDE30500450NU 450 590
SYMVDE30500500NU 500 640
SYMVDE30500550NU 30 50 3T 534 2T 262 550 690 60 34 50 19
SYMVDE30500600NU 600 740
SYMVDE30500650NU 650 790
SYMVDE30500700NU 700 840
SYMVDE30500750NU 750 890
SYMVDE30500800NU 800 940
SYMVDE30500850NU 850 990
SYMVDE30500900NU 900 1040
SYMVDE30500950NU 950 1090
SYMVDE30501000NU 1000 1140
SYMVDE30600100NU 100 260
SYMVDE30600150NU 150 310
SYMVDE30600200NU 200 360
SYMVDE30600250NU 250 410
SYMVDE30600300NU 300 460
SYMVDE30600350NU 350 510
SYMVDE30600400NU 400 560
SYMVDE30600450NU 450 610
SYMVDE30600500NU 500 660
SYMVDE30600550NU 30 60 5T 089 3T 817 550 710 70 34 60 19
SYMVDE30600600NU 600 760
SYMVDE30600650NU 650 810
SYMVDE30600700NU 700 860
SYMVDE30600750NU 750 910
SYMVDE30600800NU 800 960
SYMVDE30600850NU 850 1010
SYMVDE30600900NU 900 1060
SYMVDE30600950NU 950 1110
SYMVDE30601000NU 1000 1160
www.symko.fr
4 . cylinders
Hydraulic
Mechanical
Course
Ref. stroke
(mm)
SYMVDE35600100NU 100 260

SYMVDE35600150NU 150 310
SYMVDE35600200NU 200 360
electric
SYMVDE35600250NU 250 410
SYMVDE35600300NU 300 460
SYMVDE35600350NU 350 510
SYMVDE35600400NU 400 560
SYMVDE35600450NU 450 610
SYMVDE35600500NU 500 660
SYMVDE35600550NU 35 60 5T 089 3T 357 550 710 70 34 60 19
SYMVDE35600600NU 600 760
SYMVDE35600650NU 650 810
SYMVDE35600700NU 700 860
SYMVDE35600750NU 750 910
diesel
SYMVDE35600800NU 800 960
SYMVDE35600850NU 850 1010
SYMVDE35600900NU 900 1060
SYMVDE35600950NU 950 1110
SYMVDE35601000NU 1000 1160
SYMVDE40600100NU 100 260
SYMVDE40600150NU 150 310
SYMVDE40600200NU 200 360
SYMVDE40600250NU 250 410
SYMVDE40600300NU 300 460
Services
SYMVDE40600350NU 350 510
SYMVDE40600400NU 400 560
SYMVDE40600450NU 450 610
SYMVDE40600500NU 500 660
SYMVDE40600550NU 40 60 5T 089 2T 827 550 710 70 34 60 19
SYMVDE40600600NU 600 760
SYMVDE40600650NU 650 810
SYMVDE40600700NU 700 860
SYMVDE40600750NU 750 910
SYMVDE40600800NU 800 960
appendices
SYMVDE40600850NU 850 1010

SYMVDE40600900NU 900 1060
SYMVDE40600950NU 950 1110
SYMVDE40601000NU 1000 1160
www.symko.fr
4 . cylinders

Course
Ref. stroke
(mm)
SYMVDE30700100NU 100 310

SYMVDE30700150NU 150 360
SYMVDE30700200NU 200 410
SYMVDE30700250NU 30 70 6T 926 5T 654 250 460 80 34 60 19
SYMVDE30700300NU 300 510
SYMVDE30700350NU 350 560
SYMVDE30700400NU 400 610
SYMVDE35700100NU 100 260
SYMVDE35700150NU 150 310
SYMVDE35700200NU 200 360
SYMVDE35700250NU 250 410
SYMVDE35700300NU 300 460
SYMVDE35700350NU 350 510
SYMVDE35700400NU 400 560
SYMVDE35700450NU 450 610
SYMVDE35700500NU 500 660
SYMVDE35700550NU 35 70 6T 926 5T 195 550 710 80 34 60 19
SYMVDE35700600NU 600 760
SYMVDE35700650NU 650 810
SYMVDE35700700NU 700 860
SYMVDE35700750NU 750 910
SYMVDE35700800NU 800 960
SYMVDE35700850NU 850 1010
SYMVDE35700900NU 900 1060
SYMVDE35700950NU 950 1110
SYMVDE35701000NU 1000 1160
www.symko.fr
4 . cylinders
Hydraulic
Mechanical
Course
Ref. stroke
(mm)
electric
SYMVDE40700100NU 100 260
SYMVDE40700150NU 150 310
SYMVDE40700200NU 200 360
SYMVDE40700250NU 250 410
SYMVDE40700300NU 300 460
SYMVDE40700350NU 350 510
SYMVDE40700400NU 400 560
SYMVDE40700450NU 450 610
SYMVDE40700500NU 500 660
SYMVDE40700550NU 40 70 6T 926 4T 665 550 710 80 34 60 19
SYMVDE40700600NU 600 760
diesel
SYMVDE40700650NU 650 810
SYMVDE40700700NU 700 860
SYMVDE40700750NU 750 910
SYMVDE40700800NU 800 960
SYMVDE40700850NU 850 1010
SYMVDE40700900NU 900 1060
SYMVDE40700950NU 950 1110
SYMVDE40701000NU 1000 1160
SYMVDE30800150NU 150 330
SYMVDE30800200NU 200 380
30 80 9T 047 7T 774 90 34 60 34
Services
SYMVDE30800250NU 250 430
SYMVDE30800300NU 300 480
SYMVDE35800150NU 150 330
SYMVDE35800200NU 200 380
35 80 9T 047 7T 315 90 34 60 34
SYMVDE35800250NU 250 430
SYMVDE35800300NU 300 480
appendices
www.symko.fr
4 . cylinders

Course
Ref. stroke
(mm)
SYMVDE40800100NU 100 280

SYMVDE40800150NU 150 330
SYMVDE40800200NU 200 380
SYMVDE40800250NU 250 430
SYMVDE40800300NU 300 480
SYMVDE40800350NU 350 530
SYMVDE40800400NU 400 580
SYMVDE40800450NU 450 630
SYMVDE40800500NU 500 680
SYMVDE40800550NU 40 80 9T 047 6T 785 550 730 90 34 60 34
SYMVDE40800600NU 600 780
SYMVDE40800650NU 650 830
SYMVDE40800700NU 700 880
SYMVDE40800750NU 750 930
SYMVDE40800800NU 800 980
SYMVDE40800850NU 850 1030
SYMVDE40800900NU 900 1080
SYMVDE40800950NU 950 1130
SYMVDE40801000NU 1000 1180
SYMVDE50800200NU 200 380
SYMVDE50800250NU 250 430
SYMVDE50800300NU 300 480
SYMVDE50800350NU 350 530
SYMVDE50800400NU 400 580
SYMVDE50800450NU 450 630
SYMVDE50800500NU 500 680
SYMVDE50800550NU 550 730
SYMVDE50800600NU 50 80 9T 047 5T 513 600 780 90 34 60 29
SYMVDE50800650NU 650 830
SYMVDE50800700NU 700 880
SYMVDE50800750NU 750 930
SYMVDE50800800NU 800 980
SYMVDE50800850NU 850 1030
SYMVDE50800900NU 900 1080
SYMVDE50800950NU 950 1130
SYMVDE50801000NU 1000 1180
www.symko.fr
4 . cylinders
Hydraulic
Mechanical
Course
Ref. stroke
(mm)
electric
SYMVDE50900200NU 200 380
SYMVDE50900250NU 250 430
SYMVDE50900300NU 300 480
SYMVDE50900350NU 350 530
SYMVDE50900400NU 400 580
SYMVDE50900450NU 450 630
SYMVDE50900500NU 500 680
SYMVDE50900550NU 550 730
SYMVDE50900600NU 50 90 11T 450 7T 916 600 780 100 34 60 29
SYMVDE50900650NU 650 830
SYMVDE50900700NU 700 880
diesel
SYMVDE50900750NU 750 930
SYMVDE50900800NU 800 980
SYMVDE50900850NU 850 1030
SYMVDE50900900NU 900 1080
SYMVDE50900950NU 950 1130
SYMVDE50901000NU 1000 1180
SYMVDE501000200NU 200 410
SYMVDE501000250NU 250 460
SYMVDE501000300NU 300 510
SYMVDE501000350NU 350 560
Services
SYMVDE501000400NU 400 610
SYMVDE501000450NU 450 660
SYMVDE501000500NU 500 710
SYMVDE501000550NU 550 760
SYMVDE501000600NU 50 100 14T 135 10T 601 600 810 115 34 83 36
SYMVDE501000650NU 650 860
SYMVDE501000700NU 700 910
SYMVDE501000750NU 750 960
SYMVDE501000800NU 800 1010
SYMVDE501000850NU 850 1060
appendices
SYMVDE501000900NU 900 1110

SYMVDE501000950NU 950 1160
SYMVDE501001000NU 1000 1210
NOTE
i 3rd point cylinders:
Contact us
www.symko.fr
4 . cylinders
/ Telescopic cylinders
NOTE
Simple cylinders i Fixing and heavy ranges: contact us

BBRod: surface treatment.
BBPosition of the joint.
BBAccessories: supports, bearings – Contact us
Y ØT
Volume (L)
Course
Cradle
ring
Ref. stroke
(mm)
H I B 1 2 3 4 5 A B C D E F F’ G M
SYM294 100 - 283 45 61 390 26 25 98 25 293 30 25 80 16x1.5 1 0

SYM295 100 - 338 45 61 500 26 25 98 25 348 30 25 80 16x1.5 1.3 0
SYM305 110 - 283 45 61 76 570 26 45 115 45 293 30 25 95 1/2 1.9 1
SYM201 107 - 396 61 76 595 31 45 115 45 406 30 25 95 1/2 2.5 1
SYM296 107 - 399 45 61 620 26 40 100 40 409 30 25 80 1/2 1.6 0
SYM297 100 - 439 45 61 700 26 40 100 40 449 30 25 80 1/2 2 0
SYM202 107 - 496 61 76 795 26 45 115 45 506 30 25 95 1/2 3.3 1
SYM298 107 - 499 45 61 820 26 40 100 40 509 30 25 80 1/2 2.1 0
SYM307 110 200 391 61 76 91 875 31 45 128 45 406 30 25 108 1/2 4.5 1
SYM310 110 200 413 68 88 107 895 36 45 148 45 418 40 30 128 1/2 6.2 2
SYM306 110 - 399 45 61 76 910 26 45 115 45 409 30 25 95 1/2 3.1 1
SYM418 113 - - 68 88 107 126 910 36 45 170 45 349 40 30 150 1/2 7.7 3
SYM204 107 194 584 88 107 930 36 45 148 45 589 40 30 128 1/2 7.8 2
SYM203 107 197 589 68 88 950 36 45 128 45 594 40 30 108 1/2 5.1 1
SYM308 110 200 454 61 76 91 1060 36 45 128 45 469 30 30 108 1/2 5.5 1
SYM314 110 200 494 88 107 126 1125 36 45 170 45 499 40 30 150 1/2 11.2 3
SYM311 110 200 502 68 88 107 1160 36 45 148 45 507 40 30 128 1/2 8 2
SYM445 113 203 394 45 61 76 91 1190 26 45 128 45 409 30 25 108 1/2 5 1
SYM313 110 200 540 88 107 126 1260 36 45 170 45 545 40 30 150 1/2 12.6 3
SYM312 110 200 548 68 88 107 1300 36 45 148 45 553 40 30 128 1/2 9 2
SYM315 110 200 579 88 107 126 1380 36 45 170 45 584 40 30 150 1/2 13.8 3
SYM447 113 209 449 61 76 91 107 1380 36 45 148 45 464 30 30 128 1/2 8.4 2
SYM422 - 203 494 88 107 126 147 1470 45 50 198 50 507 50 35 178 1/2 17.6 4
SYM419 113 203 497 68 88 107 126 1520 36 45 170 45 502 40 30 150 1/2 12.9 3
SYM317 - 200 - 107 126 147 1670 45 50 198 50 699 50 35 178 1/2 23.2 4
SYM420 113 203 543 68 88 107 126 1705 36 45 170 45 548 40 30 150 1/2 14.5 3
SYM316 110 200 - 88 107 126 1710 45 45 170 45 694 50 35 150 1/2 17 3
SYM426 - 203 - 107 126 147 170 1760 45 50 238 50 592 50 35 204 1/2 29.5 5
SYM525 - 206 - 88 107 126 147 170 1805 45 50 238 50 510 50 35 204 1/2 25.8 5
SYM423 - 203 579 88 107 126 147 1810 45 50 198 50 592 50 35 178 1/2 21.7 4
SYM421 113 203 582 68 88 107 126 1860 36 45 170 45 587 40 30 150 1/2 15.8 3
SYM528 - 206 - 88 107 126 147 170 2035 45 50 238 50 556 50 35 204 1/2 29 5
SYM425 - 203 - 107 126 147 170 2200 45 50 238 50 702 50 35 204 1/2 36 5
SYM526 - 206 - 88 107 126 147 170 2230 45 50 238 50 595 50 35 204 1/2 31.9 5
SYM424 - 203 - 88 107 126 147 2250 45 50 198 50 702 50 35 178 1/2 27 4
SYM451 113 203 - 68 88 107 126 2305 36 45 170 45 697 40 30 150 1/2 19.7 3
SYM540 - 206 - 88 107 126 147 170 2470 45 50 238 50 643 50 35 201 1/2 36 5
SYM429 - 203 - 107 126 147 170 2590 45 50 238 50 802 50 35 204 1/2 46 5
SYM434 - 203 - 107 126 147 170 2780 45 50 238 50 849 50 35 204 1/2 48.5 5
SYM527 - 206 - 88 107 126 147 170 2780 45 50 238 50 705 50 35 204 1/2 39.9 5
www.symko.fr
4 . cylinders
/ “Wood splitter” double-acting
trunnion-mounted cylinders
Hydraulic
Mechanical
Course
Vo. Weight
Reference ØA ØB stroke hub: Z E C D F G H I J K L M N P
(l) (kg)
electric
(mm)
SYMVDEF4590700 45 90 700 185 135 20.5 37 100 35 25 45 64 851 3/8 45 45 4.6 28
SYMVDEF45901000 45 90 1000 185 135 20.5 37 100 35 25 45 64 1151 3/8 45 45 6.5 35
SYMVDEF501001000 50 100 1000 280 151 25.5 42 115 44 30 48 60 1145 1/2 50 50 8.0 50
SYMVDEF601001000 60 100 1000 280 151 25.5 42 115 44 30 58 60 1145 1/2 50 50 8.0 57
SYMVDEF701001000 70 100 1000 280 151 25.5 42 115 44 30 68 60 1145 1/2 50 50 8.0 66
SYMVDEF701201000 70 120 1000 280 191 - 50 140 55 - - 82 1200 1/2 50 50 11.5 92
/ Double-acting micro cylinders
diesel
Services
BBBichromated galvanized cylinder.

BBSmall size.
BBSupply inlet adjustable on the rod.
appendices
Course
stroke Vol. Weight
Reference ØA ØB E C D F G H I J K L M N
hub: Z (cm3) (kg)
(mm)
SYMVDEM122025 25 118 9 10 35 28 47 60 15 23.5 18 M10 11 12 0.58
SYMVDEM122050 12 20 50 143 9 10 35 28 72 60 15 23.5 18 M10 11 20 0.66
SYMVDEM122080 80 173 9 10 35 28 102 60 15 23.5 18 M10 11 29 0.76
SYMVDEM162550 50 146 11 12 40 35 69 65 18 25 22 M12 12 31 0.94
SYMVDEM1625100 100 196 11 12 40 35 119 65 18 25 22 M12 12 56 1.22
16 25
SYMVDEM1625150 150 246 11 12 40 35 169 65 18 25 22 M12 12 80 1.5
SYMVDEM1625200 200 296 11 12 40 35 219 65 18 25 22 M12 12 105 1.78
www.symko.fr
4 . cylinders
/ Hydraulic brake cylinders
BBComplete modular range.
BBNormal operating pressure: 180 bar.
BBPossibility of dismantling.
BBReinforced sealing (lip seal + scraper).
BBHigh corrosion resistance.
BBReduced internal oil volume at rest: shorter response time.
BBBichromated galvanized cylinder.
Standard
Course
ØA ØB Volume Weight
Reference stroke hub
(mm) (mm) (l) (kg)
(mm)
SYMVFS25110 25 110 45 0.08 2.20
SYMVFS30110 30 110 45 0.10 2.68
SYMVFS35110 35 110 50 0.13 3.26
With Clevis
Course
ØA Weight
Reference stroke hub
(mm) (kg)
(mm)
SYMVFC25110 25 110 2.50
SYMVFC30110 30 110 2.97
SYMVFC35110 35 110 3.56
With Spring Mechanism
ØA Course Weight
Reference
(mm) (mm) (kg)
SYMVFP25110 25 110 2.50

SYMVFP30110 30 110 4.47
SYMVFP35110 35 110 4.93
www.symko.fr
4 . cylinders
/ Hydraulic stands
Hydraulic
Telescopic stands
BBMaximum operating pressure: 200 bar.
BBSimple effect cylinder with spring return effect.
BBMaximum operating speed: 0.2m/s.
BBWaterproofness: polyurethane rod seal and
scraper.
BBSeamless steel external body and rod.
Mechanical
Désignation Reference
Stand kit
Possibility to itemise
Ø91 + hand pump + hosepipes SYMBEQ88 hand pump, valve or tank
and connectors
(see page 40)
electric
diesel
Services
appendices
www.symko.fr
5 . filters
/ Inline filters
Assembly in suction circuit
BBAluminium body.
BBBy-pass valve set to 0.25 bar.
BBDelivered without clogging indicator (Contact us if necessary).
BBFiltration: 10μ absolute or 25μ absolute.
BBOperating temperature: -25°C to +110°C.
Head filter for screwable cartridge
Replacement cartridge
Orifices Weight
Reference
(BSP) (kg) Filtering Flow rate Weight
Reference
(µm) (l/min) (kg)
SYMFLA002 3/4 0.233
[ SYMCLA051
SYMCLA052*
10
25
8
15
0.69
0.69
SYMFLA012 1”1/4 0.660
[ SYMCLA061
SYMCLA062*
10
25
25
50
1.33
1.33
Assembly in return circuit

BBAluminium body.
BBDelivered without clogging indicator (Contact us if necessary).
BBFiltration: 10μ absolute or 25μ absolute.
Head filter only for screw-in cartridge
Replacement cartridge
Orifices Weight
Reference
(BSP) (kg) Filtering Flow rate Weight
Reference
(µm) (l/min) (kg)
SYMFLA001 3/4 0.240
[ SYMCLA051
SYMCLA052*
10
25
45
60
0.69
0.69
SYMFLA011 1”1/4 0.636
[ SYMCLA061
SYMCLA062*
10
25
120
180
1.33
1.33
/ Suction strainers
Characteristics
BBFiltration: 125 µ.
BBConnection: BSP.
BBBrass wire mesh.
BBAluminium and galvanised steel body.
Flow rate
Reference A H D CH
(l/min)
SYMCA002-1/2 15 39114 105 46 30
SYMCA003-3/4 25 39175 109 64 36
SYMCA004-1» 50 1» 139 64 46
SYMCA011-1»1/4 65 1»1/4 139 86 60
SYMCA005-1»1/2 90 1»1/2 139 86 60
SYMCA006-1»1/2 145 1»1/2 200 86 60
SYMCA007-2» 230 2» 260 86 70
SYMCA008-2» 220 2» 151 150 70
*Hydac reference not provided

www.symko.fr
5 . filters
/ Pressure filters
Hydraulic
Characteristics
BBFiberglass filter element.
BBFiltration: 10μ absolute.
BBClogging indicator in supplement on demand.
Mechanical
Filtering Max pressure Flow rate
Reference
(µm) (bar) (l/mn)
SYMFP50 10 220 50
SYMFP100 10 250 100
SYMFP150 10 250 150
Clogging indicator
Clogging indicator Reference
B - Optical SYMICO
C - Electrical SYMICE
electric
D - Optical/Electrical 24v SYMICOE24V
NOTE
i Contact us
90
22,5
D1
D1
85
diesel
62,5
H1
90
Max pressure Flow rate

Ø 68
H2
Reference Filtering (µm) D1 connector

(bar) (l/min)
22,5
D1
D1
SYMFPB65 10 315 65 M22x150

85
SYMFPB95 10 315 95 M22x150

62,5
30
R
H1
M10x1,5
Depth 12 mm
Ø 68
H2
Services
42
25
86
27,5
44
30
R
30,3 30,3
60,6
M10x1,5
Depth 12 mm
Clogging indicator
42
25
86
Clogging indicator Reference

27,5
44
Optical SYMICOB
appendices
30,3 30,3
Electrical SYMICEB 60,6
www.symko.fr
5 . filters
/ Semi-immersed filter for tanks
Characteristics
BBOperating pressure: 3 bar – Max pressure: 6 bar.
BBTBy-pass set to 1.5 bar.
BBFiltration: 25 µ.
BBFilter element material: micro-perforated treated paper.
BBComplete filter delivered.
Max flow rate ØA

Reference Spare cartridge
(l/mn) BSP
SYMFSI001 30 SYMCR021 1/2
SYMFSI005 100 SYMCR023 1”
SYMFSI006 180 SYMCR024 1”1/4
www.symko.fr
5 . filters
/ Grape harvesters filters
Hydraulic
For grape harvesters:
ALMA, GREGOIRE,
NEW HOLLAND, PELLENC ...
HYDAC filters: Contact us
Mechanical
Hydraulic filters for your grape harvesters
Brand Reference of origin
ref. Hydac 1263017

ALMA
070291 - 070649 - 187004
BOBARD 68590406 - 68590408 - 68590410 - 68590500
electric
GREGOIRE 170015 or 170043 - 170016 - 170017 - 170020 - 170021 - 170117 - 170203
LOISEAU HE0002 - HE0005 - HE0045 - HE0061
9964723 - 9964728 - 9964741 - 9964770 - 9964918 - 707737851 - 920016575 -

NEW HOLLAND
920016584 - 920016590 - 920018520 - 920018543 - 920019190
ref. Hydac 1250487

PELLENC
2438818 - 3609359 - 3903588 - 3936171 - 3942694
diesel
NOTE
i Other brands:
Contact us
Services
appendices
www.symko.fr
5 . filters
/ Pollution measuring devices
FCU 1000
The FluidControl Unit FCU 1000 is a portable service unit, designed for the
temporary measurement of solid particle contamination, water saturation
and fluid temperature in hydraulic systems as well as diesel fuels.
The integrated pump and the hoses contained in the FCU 1000 series scope
of delivery allow operation in:
-control circuits (oil hydraulics only)
-pressure circuits (oil hydraulics only)
-pressureless reservoirs (oil hydraulics and Diesel fuels).
BBAll measurement data are stored with time stamp in files (measurement
value file) and folders (measurement points) in the internal data memory
of the FCU 131X.
BBThe measured values can be transmitted to a PC or mobile devices and
analyzed using HYDAC’s own FluidMonitoring Software FluMoS.
Applications:
BBHydraulic systems
BBDiesel storage, diesel transfer and diesel filling applications, e.g. mines,
refineries, ports of transshipment, emergency power systems (emergency
power units), mobile machines, etc.
BBService
BBMaintenance
Advantages:
BBSuitable for hydraulic fluids up to 350 mm²/s
BBSuitable for Diesel fuels (suction mode only) according to DIN EN 590 and
ASTM D975 4-D
BBCleanliness classes to ISO and SAE or NAS
BBIntegrated data interfaces (wireless and cable) for direct connection to
HYDAC’s FluidMonitoringSoftware FluMoS
BBUSB interface for data storage
www.symko.fr
5 . filters
The filter unit OF 7 is used as a portable Repairs on building
Hydraulic
service unit for filling hydraulic plants, sites. No rinsing before
flushing small hydraulic plants and commissioning. Fluid not
dedusting in bypass flow. Furnishing with the filtered when filling. No
ContaminationSensor CS 1000 permits the rinsing after repairs.
simultaneous monitoring of oil cleanliness.
The output of the cleanliness class ensues in The mobile filter unit OF 5 mobile is used
accordance with either ISO, SAE or NAS. The for filtered filling and emptying, for offline
FREEZE function on the display enables the filtration and for the unfiltered pumping-
depiction of the last 20 measured values in out of hydraulic and lubrication oils. The
Mechanical
the integrated display. mobile filtration unit can be optionally
A special version for extracting leak oil (leak equipped with the ContaminationSensor
oil drain pump) is available. CS 1000 for simultaneous monitoring of
Flow rate: 15 L/min the solid particle contamination in the oil.
Filter size: 0160 Utilisation on hydraulic and lubrication oil
Weight: 12 kg (26.5 lbs) plants in different industries.
Flow rate: up to 40 L/min
Filter size: 1300
Weight: 70 kg (154 lbs)
electric
Portable filling and filtration units
BBThe Hydac portable filtration unit is the solution for filtering
your fluids when filling.
BBSpecially recommended for:
- filling and emptying, with or without filters, of
hydraulic power stations or mobile machinery .
- depollution after replacement of a defective
component.
BBPreventative maintenance of hydraulic circuits.
diesel
BBThe Hydac filtration unit it’s:
- an easy installation in workshop or on site.
- size reduced = economical solution. Reference
SYMOF7
Characteristics
BB2.5m hoses. BBOperating pressure: 3.5 bar.
BB10μ filtering cartridge. BBMineral fluid (viscosity max. 350 Cst).
Services
BBOptical clogging indicator. BBFiltration fineness: 10 μm standard.
BBStrap wrench. BBFilter without media filtering.
BBContactor M / A, cable of 2.8m (model 230V 50Hz). BBWeight: 12 kg.
BBFlow rate: 15 L/min.
/ Mobile depollution units

appendices
BBFlow rate: 25 to 30 l/m.

BBPower 750Watt.
BBSelf-priming rotary vane pump.
BBCartridge filter 10 μ + 1 replacement cartridge. Reference
BBFilter clogging indicator.
SYMDEPUROIL
www.symko.fr
6 . accumulators
/ Hydraulic accumulators
Applications: Characteristics: Uses:

BBFront loaders. BBComplies with CE regulations on BBProtection against water
BBTelescopic. equipment. hammer.
BBSuspensions. BBForged steel body assembled by BBMaintain pressure.
BBPlows. welding. BBCompensation for leaks.
BBForklifts. BBMembrane: PERBUNAN with BBHydro-pneumatic
valve. suspensions.
BBOperating temperature: -10°C to BBPulse shock absorber.
+ 80°C. BBDynamic security.
BBIndifferent mounting position.
BBThe design allows a total
discharge at each function.
Q
Volume Max pressure Inflation Orifice R D Weight
Reference in L/
in L (bar) pressure (BSP) (in mm) (in mm) (kg)
min
SYMAM0,32 0,32 210 116 93 1,3

SYMAM0,5 0,5 210 133 105 1,7
SYMAM0,6/330 0,6 330 151 115 3,3
SYMAM0,7/100 0,7 100 151 106 1,8
SYMAM0,75 210 147 121 2,8
SYMAM0.75/250 0,75 250 G1/2 152 126 3,6 95
SYMAM0,75/330 330 140 126 4
SYMAM1/200 1 200 160 136 3,6
SYMAM1,40/140 140 173 145 3,9
To be
SYMAM1,40 1,4 210 179 150 5,4
specified
SYMAM1,40/330 330 174 155 7,6
SYMAM2/100 100 190 160 4
SYMAM2 2 210 196 167 6,6
SYMAM2/330 330 183 172 9,2
SYMAM2,80 210 250 167 8,2
2,8 G3/4 150
SYMAM2,80/330 330 238 172 11
SYMAM3,50/250 250 306 170 11,2
3,5
SYMAM3,50/330 330 276 172 13,8
SYMAM4/50 4 50 295 158 5
Manufacturer Reference of origin Reference SYMKO
87332788 (0.16 L ; 210 bar) ENS12063

87354713 or 82025705 (1 L ; 200 bar) ENS11016 or SYM3098640
CNH
87602613 (1 L ; 200 bar) ENS13079
47375129 or 87383952 (2 L ; 210 bar) ENS13071 or SYM3413346
7352660103 (0,5 L ; 210 bar) ENS16058
MASSEY
7352660104 (0,75 L ; 210 bar) ENS15001
NOTE
i For your accumulator setup: contact us.
www.symko.fr
6 . accumulators
/ FPU-1 HYDAC – Accumulators
inflation and control
Hydraulic
The FPU-1 inflation and control device is used to supply nitrogen to Reference Designation
the accumulator, check or correct the existing pressure. To this end,
the device is screwed onto the gas valve of the accumulator and SYMFPU2 Briefcase
connected by a hose to a current-type nitrogen bottle. SYMFPU3 With pressure regulator
Mechanical
Adaptators for Olaer, Leduc and other Hassle-free setup
accumulators brands
Pressure regulator nitrogen Adaptator for

bottle (option) nitrogen bottle
electric
Hosepipe
L=2.5m Manometer
diesel
Services
appendices
www.symko.fr
7 . Heat exchangers and coolers
/ Heat exchangers
These fans are specially designed for applications in the mobile
where power, efficiency and compact size are required. Heat
exchangers are used especially in agriculture (New Holland,
Gregory, Massey Ferguson, etc.), construction and handling
machines.
BBMaximum operating pressure: 15 bar.

BB12 volt motor (24 volts on request).
BBSeveral temperature probes are adaptable.
Technical characteristics
Max oil flow rate Fan diameter

Reference Type Weight (kg) Integrated by-pass
(l/min) (mm)
SYMA1512V A15 45 190 3,3 No

SYMA2012V A20 80 225 4,7 No
SYMA2512V A25 140 280 7,8 No
SYMA4512V A45 190 305 15 No
SYMA16BP12V A16 45 190 3,3 Yes
SYMA20BP12V A20 80 225 4,7 Yes
SYMA26BP12V A26 140 280 7,8 Yes
SYMA46BP12V A46 190 305 15 Yes
/ Temperature sensors
BBMaterial: brass and polyamide.
BBWeight: 117 g.
BBMaximum temperature: 120°C.
BBTemperature differential: 11°C.
BBIP54 protection with IP65 cap.
Trigger temperature Trigger temperature

Reference Connector
+or- 5°C NO contact +or- 5°C NF contact
SYMST45 40°C 40°C M22x1,5

SYMST60 55°C 55°C M22x1,5
www.symko.fr
7 . Heat exchangers and coolers
Size
Without
A B C D E F G H I J
Hydraulic
by pass
A15 270 240 146 80 10 220 25 193 193 20
A20 335 283 137 75 11,5 260 22,5 233 235 1,5
With by
K L M N O P Q R S
pass
A15 65 50 / / G3/4 22x1,5 38,5 65 135
A20 66,5 45 40 52 G3/4 22x1,5 50 66,5 167,5
Without
Mechanical
A1 B1 C1 D1 E1 F1 G1 H1 I1 J1
by pass
A25 400 335 134 125 10 335 25 295 300 /
With by
K1 L1 M1 N1 O1 P1 Q1 R1 S1
pass
A25 97,5 50 / / G1 22x1,5 50 97,5 167,5
Without
A2 B2 C2 D2 E2 F2 G2 H2 I2 J2
by pass
A45 450 395 185 150 / / / 372 350 /
electric
With by
K2 L2 M2 N2 O2 P2 Q2 R2 S2
pass
A45 / 82 40 / G1''1/4 22x1,5 50 / 225
Without
A B C D E F G H I J K L
by pass
A16 290 246 141 190 160 60 222 65 55 45 12 22,5
A20 345 284 137 250 150 45 259 45 50 50 12,5 22,5
A26 400 359 129 290 250 / 331 / 55 55 14 22,5
A46 450 339 164 340 300 / 374 / 55 55 12,5 31,5
diesel
With by
M N O P Q R S T U V X Y
pass
A16 45 28 190 47 18 145 140 129 140 228 G3/4 22x1,5
A20 45 26 232 / / / / 175 170 / G3/4 22x1,5
A26 45 28 303 103 38 195 195 179 195 340 G1 22x1,5
A46 63 25,43 348,14 120 40 225 225 204 220 384,57 G1''1/4 22x1,5
Services
appendices
www.symko.fr
8 . Accessories
/ Flow-regulator valves
Unidirectional flow-regulator valves
BBNickel-plated OT58 body.
BBIn-line mounting.
BBThumb wheel adjustment with built-in locking screw.
Orifices Flow rate Max pressure

Reference
(BSP) (l/mn) (bar)
SYMEDU14 1/4 20 210
SYMEDU38 3/8 35 210
SYMEDU12 1/2 60 210
Bidirectional flow-regulator valves

BBNickel-plated OT58 body.
BBIn-line mounting.
BBThumb wheel adjustment with built-in locking screw.

Reference
(BSP) (l/mn) (bar)
SYMEDB14 1/4 20 210
SYMEDB38 3/8 35 210
SYMEDB12 1/2 60 210
Adjustable flow dividers

BBCompensated in pressure.
BBPriority flow adjustable and constant whatever the load.
BBRemaining capacity for another receiver.
Orifices Regulated flow Max flow rate Max pr.
Reference
(BSP) rate (l/mn) (l/mn) (bar)
SYMDDR50 3/4 0 to 47 114 250
SYMDDR75 3/4 0 to 76 114 250
/ Pressure limiters
Characteristics
BBStandard aluminum body - Maximum pressure: 250 bar.
BBSteel body on request - Maximum pressure: 350 bar.
BBFunction with bypass.
BBIn-line mounting.
BBStandard calibration: 20 to 250 bar (Other calibration on request).
Reference
(BSP) (l/mn) (bar)
SYMLP5-38 3/8 35 250
SYMLP10-12 1/2 60 250
SYMLP20-34 3/4 100 250
www.symko.fr
8 . Accessories
/ Check valves
Hydraulic
Simple check valves – In-line mounting
BBSteel body.
BBStandard calibration: 0.35 bar (other settings on request).
Orifices Flow rate Operating B C

Reference CH
(BSP) (l/mn) pressure (bar) (lg) (Ø)
Mechanical
SYMCAR14 1/4 15 300 60 18.5 19
SYMCAR38 3/8 30 300 70 23.5 24
SYMCAR12 1/2 50 300 77 29.5 30
SYMCAR34 3/4 90 300 90 35.5 36
SYMCAR100 1” 120 300 106 44.5 45
SYMCAR114 1”1/4 150 300 125 54.5 55
electric
Pilote-operated check valves – In-line mounting
BBSteel body.
BBOpening pressure: 0.5 bar.
Orifices Max flow rate Operating

Reference Pilot ratio
(BSP) (l/min) pressure (bar)
SYMCARSP38 3/8 1:04 35 350
diesel
SYMCARSP12 1/2 1:04 50 350
SYMCARSP34 3/4 1:04 80 350
Services
Dual pilote-operated check valves – In-line mounting
BBAluminum body - Maximum pressure: 350 bar.
BBInternal steering.
BBUse to block 1 or 2 lines of a receiver.
BBThe dispenser control automatically unlocks.
BBFor use with open center dispensers.
appendices
Orifices Operating pressure

Reference Max flow rate (l/min)
(BSP) (bar)
SYMCARDP38 3/8 35 350
SYMCARDP12 1/2 50 350
SYMCARDP34 3/4 100 350
www.symko.fr
8 . Accessories
3-way valves with cylindrical bushel
BBForged steel body.
BBValve with with communication of the orifices in central position.
BBto avoid risk of excessive pressure when using the control.
Orifices Max pressure Max flow rate

Reference
(BSP) (bar) (l/mn)
SYMVBC38 3/8 250 35
SYMVBC12 1/2 250 60
SYMVBC34 3/4 250 100
SYMVBC100 1” 250 180
2-way ball valves

BBGalvanized zinc-plated steel body – Chrome-plated steel ball.
BBTemperature: -20°C to +100°C.
Max flow rate

Reference Orifices
(bar)
SYMRBS214 1/4 500
SYMRBS238 3/8 500
SYMRBS212 1/2 500
SYMRBS234 3/4 320
SYMRBS2100 1” 320
SYMRBS2114 1”1/4 320
SYMRBS2112 1”1/2 320
3-way ball valves

BBGalvanized zinc-plated steel body – Chrome-plated steel ball.
BBTemperature: -20°C to +100°C.
BB“L” passing.
Max flow rate

Reference Orifices
(bar)
SYMRBS314 1/4 500
SYMRBS338 3/8 500
SYMRBS312 1/2 500
SYMRBS334 3/4 320
SYMRBS3100 1” 320
SYMRBS3114 1”1/4 320
SYMRBS3112 1”1/2 320
www.symko.fr
9 . Hydraulic units
/ Compact hydraulic units
Hydraulic
BBDisplacement: 3.2 cm3. Reférence Voltage
BBMax pressure: 210 bar. SYMMCB12V 12V
BBPressure of setting: 180 bar.
BBMotors: 12V-24V / 1800W.
SYMMCB24V 24V
BBPlastic tank: 7L.

BBTank mounting: horizontal / vertical.
Mechanical
BBControl: electric, electrically controlled descent valve.
12 / 24 V DC or AC
electric
/ Hydraulic units for scrapers
diesel
Standard equipment
BBPower from 3 kW to 5.5 kW.
BBFlow rate: 23, 27, 32 or 36 l/min.
BBTank:
Services
- Capacity: 50 and 80 liters.
- Painted or galvanized steel.
BBOptions:
- Low level with electrical contact
- Electrical cabinet
- Tank top float level indicator
appendices
www.symko.fr
9 . Hydraulic units
/ Hydraulic units kits
Let us design and build your hydraulic unit.
Characteristics
BB3-point chassis 3 or specific.
BBVolume to be defined.
BBPump flow, number of outlets and chillers according to users.
BBOil cooler according to need.
www.symko.fr
9 . Hydraulic units
/ Accessories for hydraulic units
Hydraulic
Tanks
Mechanical
electric
Ø
Capacity A B C D E F Weight Flow rate Filter
Reference Asp.
(L) mm mm mm mm mm mm (kg) (l/min) reference
Gaz
SYMRME00100 10 440 170 220 365 203 200 6 3/4" 30 RTF3.40
SYMRME00400 40 560 260 430 470 405 270 20 1"1/4 60 RTF6.40
SYMRME00550 55 490 360 430 400 405 270 21 1"1/4 60 RTF6.40
SYMRME00750 75 690 300 500 600 475 400 26 1"1/4 180 RTF18.40
SYMRME01000 100 690 350 650 600 625 400 30 1"1/4 180 RTF18.40
SYMRME01500 150 910 350 700 8OO 670 600 38 1"1/4 180 RTF18.40
diesel
Services
appendices
www.symko.fr
9 . Hydraulic units
FSA type level indicators
BBFive regularly staggered sizes.
BBOptical thermometers with display in °C and °F.
BBThermometers recording temperature in the hydraulic tank
with display in °C.
BBAvailable on request also in °C in °F.
BBEasy standardized assembly (FSA / K).
Preferential deliveries
Type Nomial size
SYMFSA - 076 - 1.X/-/12 76
SYMFSA - 076 - 2.X/-/12 76
SYMFSA - 127 - 1.X/-/12 127
SYMFSA - 127 - 2.X/-/12 127
SYMFSA - 176 - 1.X/-/12 176
SYMFSA - 176 - 2.X/-/12 176
SYMFSA - 254 - 1.X/-/12 254
SYMFSA - 254 - 2.X/-/12 254
SYMFSA - 381 - 1.X/-/12 381
SYMFSA - 381 - 2.X/-/12 381
FSK type electrical indicators

BBFour regularly staggered sizes.
BBSwitch contact: opening type (O), closing (C) or reversing (W).
BBTemperature sensor for monitoring the temperature in the hydraulic
tank, with display in ° C.
BBAvailable on request with display in °C and °F.
Type Nominal size

SYMFSK-127-2.X/O/-/12 127
SYMFSK-127-2.X/C/-/12 127
SYMFSK-127-2.X/W/-/12/Z4 127
SYMFSK-127-2.X/O/-/12/SEW 127
SYMFSK-176-2.X/O/-/12 176
SYMFSK-176-2.X/C/-/12 176
SYMFSK-176-2.X/W/-/12/Z4 176
SYMFSK-254-2.X/O/-/12 254
SYMFSK-254-2.X/C/-/12 254
SYMFSK-254-2.X/W/-/12/Z4 254
SYMFSK-381-2.X/O/-/12 381
SYMFSK-381-2.X/C/-/12 381
SYMFSK-381-2.X/W/-/12/Z4 381
www.symko.fr
10 . pressure control
/ Pressure control cases
Hydraulic
Pressure Control Cases n°1
Polythene case containing:
BB1 microbore hose M16x200 length 1.5 meter.

BB3 pressure plugs M16x200 x 1/4 BSP.
BB3 manometers Ø63 (pressure to choose).
BB2 manometer connections 1/4 x M16x200 female.
Mechanical
BB1 manometer connection 1/4 x M16x200 male.
BB1 adaptator 1/4 x male 3/8 BSP.
BB1 adaptator 1/4 x male 1/2 BSP. Reference
SYMMALLETTE N°1
electric
Pressure Control Cases n°2
BB1 microbore hose M16x200 length 1.5 meter.

BB2 pressure plugs M16x200 x 1/4 BSP.
BB2 manometers Ø100 (pressure to choose).
BB1 manometer connections 1/2 x M16x200 female.
BB1 manometer connection 1/2 x M16x200 male.
diesel
BB1 adaptator 1/4 x male 3/4 BSP. Reference
SYMMALLETTE N°2
Services
Mano-digital Cases
BB1 mano-digital 0 to 600 bar.

BB1 microbore hose M16x200 length 1.5 meters.
BB1 microbore hose M16x200 length 2 meters.
BB2 conical pressure plugs 1/8”
appendices
BB2 junctions M16x200 – M16x200 Reference

BB2 pressure couplers
SYMMALLETTE N°3
www.symko.fr
/ Manometers
Ø63 And Ø100
Stainless steel case - Vertical brasss fitting - glycerin filled
Ø63 Ø100
Pressure Pressure
Reference Connector Reference Connector
(bar) (bar)
SYMMANO6325 1/4" 0 to 25 SYMMANO10025 1/2" 0 to 25
Rear connector
Ø63 Ø100
NOTE
Reference Connector
Pressure
(bar)
Reference Connector
Pressure
(bar) i Special adaptators
SYMMANO6325F 1/4" 0 + 25 SYMMANO10025F 1/2" 0 + 25
available on demand
- ‐ ‐ SYMMANO1001000F 1/2" 0 + 1000
Digital manometer
Uses
The digital manometer simultaneously displays the current pressure, pressure tip, battery level and
selected unit of measurement. The display’s illumination can be deactivated in a single pulse. By means
of the keys of the screen, the user can easily: reset the pressure tip, display the min and max pressure,
initialize the reference and change the units of measurement.
Benefits
BBCeramic sensor, stainless steel for the measuring diaphragm.
BBScan at 10 ms.
BBPrecision +/- 0.5% of the scale.
BBLCD screen 50*34 mm with 15 mm characters and units in
Bar, PSI, Mpa, Kpa, mbar. Backlight, bar graph.
BB4 tactile touches: ON/OFF, MIN/MAX-FS, RESET-OK, MENU/ZERO
BBPermitted overpressure 1200 bar and breaking pressure at 2200 bar.
Applications
The digital manometer has been designed for a continuous monitoring of
oil, gas, water and other fluids pressure on mobile, industrial, compressor
Reference
and control equipments.
SYMMANOD600B
www.symko.fr
/ Microbore hoses
Hydraulic
BBRotating knurled nuts with protective cap.
BBPossibility of microbore hose with connection in Test 20, 15,
12 and 10 for particular applications:
- Test 20-M16x200
- Test 15- M16*1.5
- Test 12-12.65*1.5
- Test 10-plug-in system
Mechanical
BBOperating pressure 600 bar - test pressure 1800 bar.
BBInternal Ø: 2.2 mm - External Ø: 5.5 mm.
Length Weight
Reference
(mm) (kg)
SYMFPP500 500 0.077
SYMFPP1000 1000 0.084
SYMFPP1500 1500 0.095
SYMFPP2000 2000 0.107
electric
SYMFPP2500 2500 0.112
SYMFPP3000 3000 0.117
Manometers plugs
BBBichromated galvanized steel.
BBM16x200 rotating knurled nut. Orifice
Reference Application
(BSP)
SYMRM1/4 1/4 Mano Ø 63
diesel
SYMRM1/2 1/2 Mano Ø 100
Pressure plugs
BBThread M16 x 200.
BBOperating pressure 640 bar.
Services
Fig.1 Fig.2 Fig.3
Length
Reference Thread Waterproofing Picture
(mm)
SYMDF04-18NPTF 42 1/8 BSP Cone fig.4
SYMDF04-18NPTM 36 1/8 BSP Cone fig.4
SYMPDP8100 44,5 M8*100 O-ring seal fig.5
SYMPDP10100 44,5 M10*100 O-ring seal fig.5
SYMPDP12150 46 M12*150 Embedded seal fig.5
appendices
SYMPDP14150 48 M14*150 Embedded seal fig.5

SYMPDP18BSP 44 1/8 BSP Embedded seal fig.3
SYMPDP18GAZco 44 1/8 GAZco Cone fig.1
Fig.5 SYMPDP14BSP 48 1/4 BSP Embedded seal fig.5
Fig.4 SYMPDP14GAZco 48 1/4 GAZco Cone fig.1
SYMPDP38BSP 48 3/8 BSP Embedded seal fig.5
SYMPDP716UNF 45,14 7/16-20 UNF O-ring seal fig.5
SYMPDP916UNF 45,93 9/16-18 UNF O-ring seal fig.5
SYMPDP16200 42 M16*200 (x2) - fig.2
Fig.2 SYMPDPTEST12 32 F12,65*150 - N/A
www.symko.fr
/ Hydraulic measuring
instruments
HMG 500
Utilisations:
BBEasy and fast reading of pressure, flow & temperature.
BBNo training required.
Applications: mobile & industry: After Sales Service, hydraulic workshops, tuning, control...
Benefits:
BBNo programming required.
BBWorks with HSI sensors (Hydac Sensor Interface).
BBUltra fast sampling.
BBErgonomic.
BBAutomatic sensor recognition.
BBLarge LCD screen.
BBBattery charge indicator.
BBTemperature and flow rate sensors available (ETS, EVS HSI version).
Characteristics:
BBFunctions: Min & Max memory, differential value A-B.
BBAutomatic recognition: physical quantity + measuring scale.
BBAcquisition time: 0.1 ms (10,000 measurements / second).
BBDimensions: 100 x 170 x 40 mm.
BBWeight: approx. 410 g.
BBUnits available: bar, PSI, °C, °K, °F, MPa, L / min, g / min.
BBUnités disponibles: bar, PSI, °C, °K, °F, MPa, L/min, g/min.
Reference Inside the case Reference Option

- 1 HMG 500
- 1 pressure sensor 909 298S Temperature sensor
Kit HMG 500
- 1 M12X1 sensor cable for HMG
909 470S
- 1 adaptator G¼ Minimess 16x2 HSI turbines (flowmeters)
909 404S
- 1 briefcase 15 - 300 l/min
BBEconomical and simple (no training required).

BB2 inputs with HSI (Hydac Sensor Interface) automatic recognition.
BBMeasurement of Pressure, Flow and Temperature, rpm automatically
recognized (range & unit).
BBSampling at 0.1 ms + storage of MIN / MAX.
BBDifferential function A-B.
BBTest function of mechanical pressure switches.
BBTest of pessostats.
BBLiquid pollution.
BBPressure.
BBTemperature.
BBFlow.
BBRotation speed.
BBControl of manometers.
www.symko.fr
HMG 2500
The EXPERT pack is supplied with a case, including the HMGWIN
Hydraulic
operating system.
It allows to quickly make expert reports in PDF format.
The Expert Pack has been developed for the measure of P, Q, T, Tr/Min…
Designed for detailed analysis, the Pro Pack allows to measure pressures, flows
and temperatures. By combining them, it is possible to obtain DeltaP, hydraulic
powers.
Its applications: tuning, implementation, adjustment, expertises of hydraulic
systems…
Mechanical
Several pack are available:
Premium Pack:
BBRef.: SYM4087976 (250 bar) BB2x 250 bar or 2x 400 bar
SYM4087978 (400 bar) BB+2 minimess connectors
BB+2 40cm microbore hoses
Pro Pack:
BBRef.: SYM4087980 (250 bar) BB2x 250 bar or 2x 400 bar
electric
SYM4088032 (400 bar) BB1…9 bar
BB15…300L/min
BB3x minimess connectors
BB2x 40cm microbore hoses
Expert Pack:
BBRef.: SYM4088033 BB 2x 250 bar AND 2x 400 bar
BB 15…300L/min
BB Tr/Min
diesel
BB -25°C to +100°C
BB +5 minimess connectors
BB+2 40cm microbore hoses
Services
appendices
NOTE
i New HMG 4000:
Contact us
www.symko.fr
II.
PART
Mechanical part
and components
1. Housings
2. Axles
3. Gearboxes
4. Final drives
5. Drive shafts
6. Specific tooling
1 . housings
/ Gearboxes for
hydraulic gear pumps
Hydraulic
Mechanical
Gearboxes for hydraulic gear pumps Gearboxes for hydraulic gear pumps
Power and output speed Power and output speed
Type Ratio Pn Type Ratio Pn
CV kW min-1 CV kW min-1
electric
01:03,5 15 11 1500 01:03,6 68 50 1500
CAR3P MGE7
01:07 22 16 3000 01:07 75 55 3000
01:03,5 40 29,5 1500 01:01,8 95 70 1800
MGE5
01:07 50 36,5 3000 MGE9 01:03 80 59 1500
01:03,5 43 31,5 1500 01:07 80 59 3000
MGA
01:07 52 38 3000 01:01,8 110 81 1800
01:03,5 51 37,5 1500 M10 01:03 85 62,5 1500
MGE6
01:07 60 44 3000 01:03,8 85 62,5 1500
01:02 163 120 1500
A-MA
--- --- --- ---
diesel
/ Multi-purpose gearboxes
Services
NOTE
i Multi-purpose gearboxes:
Contact us.
Appendices
www.symko.fr
1 . housings
/ Pumps drives
TECHNODRIVE
Max power
Designation Pads
(kw)
AM 110 1 180
AM 216 2 205
AM 220 2 355
AM 230 2 430
AM 232 2 565
AM 320 3 205
AM 330 3 355
AM 345 3 430
AM 365 3 670
AM450 4 640
AM 480 4 700
i NOTE
For all demand regarding TwinDisc products, contact us..
www.symko.fr
1 . housings
/ Gearboxes for
hydraulic gear pumps
Hydraulic
Gr 2
Input Output Maximum
Reference Pump size Shaft 1”3/8 Ratio speed speed output
(tr/min) (tr/min) torque
SYMMMG2 Male
Gr 2 1/3,5 540 1890 5,8 MdaN
Mechanical
SYMMFG2 Femal
On demand:
BBAssembled double pump flange.
BBOther multiplication ratios.
BBCross shaft.
BBSpeed reducing version.
BBOther output torques max.
i NOTE
electric
Tank page 99
Gr 3
Input Output Maximum
Reference Pump size Shaft 1”3/8 Ratio speed speed output
(tr/min) (tr/min) torque
SYMMMG3 Male
Gr 3 1/3,5 540 1890 5,8 MdaN
SYMMFG3 Femal
diesel
On demand:
BBAssembled double pump flange.
BBOther multiplication ratios.
BBCross shaft.
BBSpeed reducing version.
BBOther output torques max.
NOTE
i Tank page 99
Services
Coupling sleeves
Cotter D Length L
Reference Pump Cone Gear theet
(mm) (mm)
Appendices
SYM10005 GR 2 1/8 3,2 14 22

SYM10026 GR 2 1/8 4 14 22,5
SYM10012 GR 2 1/8 3,2 18 22
SYM10044 GR 2 1/8 4 18 22,5
SYM10035 GR 2 1/8 4 15 22,5
SYM10504 GR 2 1/5 3 15 20
SYM10506 GR 2 1/5 3 17 20
SYM10014 GR 3 1/8 4 18 26
www.symko.fr
1 . housings
/ Kit gearboxes/pumps
Gr 2
Livré monté
REFERENCE PUMP FLANGES
Flow rate at
ASP REF
Kit Displacement 1890 tr/min Max pressure A B
GR P1+P2 P1+P2
gearboxes/pumps (cm3/tr) P1+P2 P1+P2 (Bar) (mm) (mm)
(Gaz) (Gaz)
(L/min)
SYMM2MP20500 5 10 44,6 93,45
SYMM2MP20600 6 12 45,9 96,15 1/2 3/8
SYMM2MP20800 8 15 48,2 100,65
250
SYMM2MP21100 11 21 50,4 105,15
2
SYMM2MP21400 14 27 53,6 111,55
SYMM2MP21700 17 33 55,9 116,05 3/4 1/2
SYMM2MP22000 20 38 210 58,1 120,55

SYMM2MP22600 26 50 180 64,3 132,85
Gr 3
Livré monté
REFERENCE PUMP FLANGES
Flow rate at
ASP REF
Kit Displacement 1890 tr/min Max pressure A B
GR P1+P2 P1+P2
gearboxes/pumps (cm3/tr) P1+P2 P1+P2 (Bar) (mm) (mm)
(Gaz) (Gaz)
(L/min)
SYMM3MP33100 31 59 67,5 137,07
SYMM3MP33600 36 68 250 69,5 141,07

SYMM3MP34100 3 41 78 71,5 145,07 1’’ 3/4
SYMM3MP35600 56 105 230 76,3 154,57
SYMM3MP36100 61 115 200 78,3 158,57
NOTE
i For GR2 and GR3 alone, see page 109.
www.symko.fr
2 . axles
/ Axles
Hydraulic
Axles parts
Brands:
Agco 1
4
2
Agrale Fiat-Kobelco Pettibone 3 7
6
5
Alcelik Ford Renault

Astec Gehl Sambron
9
8
Mechanical
Belarus Hidromek Same
19
10
Bobcat Hydrema Sennebogen 26
20
11
12
Buhler Hyster Still
19
21 13
17
22
16
23
Carraro Jlg Tata

18
24
14
Case John deere Terex
2
15
Case ih Jungheinrich Toyota 25

8
Caterpillar Komatsu Uzel

Cesab Lamborghini Valtra
Changlin Landini Venieri
Claas Liebherr Volvo
electric
Deutz Linde Xcmg
Dexheimer Mahindra & mahindra Yale
Ditch witch Massey ferguson Zetor
Erkunt Matbro
Escorts Mc cormick
Fai-komatsu Nacco
Farmtrac Neuson kramer
Fendt New holland
Fermec O&k
Fiat-Hitachi OM
diesel
NOTE
i Axle designation: see identification plate page 112. Download the
exploded view of your axle on our website.
Services
Complete axles
The supply of complete axles is possible.
Careful, in the case of new complete axles from the factory,

deadlines can be several weeks.
For more information, please contact us.

Appendices
NOTE
i Specific transmission oil:
contact us.
www.symko.fr
2 . axles
Services
Our workshop, certified DANA and CARRARO, is able to repair your
complete axles according to manufacturer specifications.
How to recognize the origin of an axle ?

Products from Carraro and Dana are recognizable with their metal identification plate. This plate
gathers all the information to identify the part:
BBLogo
BBModel of the part
BBSerial number of the part
NOTE
i See more details page 141 and more information on
www.carraro-distribution.fr and www.symko-transmission.fr
www.symko.fr
3 . gearboxes
/ Gearboxes
Hydraulic
Gearboxes parts
Brands:
Agco
Agrale Fiat-Kobelco Pettibone
Astec Gehl Sambron
Mechanical
Bobcat Hydrema Sennebogen
Buhler Hyster Still
Carraro Jlg Tata
Case ih Jungheinrich Toyota
22
Changlin Landini Venieri 21
6
27
23
Claas Liebherr Volvo 12

8
8
7
electric
Deutz Linde Xcmg 26 7 9
24

25
9 10
17

11
Erkunt Matbro 21
2
3
Escorts Mc cormick 19
18 9 1
Fai-komatsu Nacco 14
15
10
5
Farmtrac Neuson kramer 13
Fendt New holland

16
2
15 =4
Fermec O&k
14
20
10 27
Fiat-Hitachi OM
diesel
NOTE
i Type of gearboxe: see page 112.
Download the exploded view on our website.
Services
Complete gearboxes
The supply of complete gearboxes through reman or new is possible.
Careful, in the case of new parts from the manufacturer, deadlines can be
several weeks.

Appendices
Services
Our Dana and Carraro certified workshop
is able to repair your gearboxes and to
test them on our test bench for validation NOTE
according to manufacturer specifications. i Specific transmission oil:
contact us.
For more information, please contact us
www.symko.fr
4 . Réducteurs
/ Transmissions
and final drives
Final drives parts
Brands:
Agco
Agrale Fiat-Kobelco Pettibone
Astec Gehl Sambron
Bobcat Hydrema Sennebogen
Buhler Hyster Still
Carraro Jlg Tata
Case ih Jungheinrich Toyota
Changlin Landini Venieri
Claas Liebherr Volvo
Deutz Linde Xcmg
Erkunt Matbro
Escorts Mc cormick
Fai-komatsu Nacco
Farmtrac Neuson kramer
Fendt New holland
Fermec O&k
Fiat-Hitachi OM
NOTE
i Designation of the final drive, see page 112.
Download the exploded view of your final drive on our website.
Complete final drives

The supply of complete final drives is possible.
Careful, in the case of new parts from the manufacturer, deadlines can
be several weeks.
Services
Our authorized repair center, Dana/
Carraro/O&K, is able to repair your final drives NOTE
according to the factory recommendations. i Specific transmission oil:
contact us.
www.symko.fr
5 . drive shafts
/ Cardan shafts
Hydraulic
Cardan shafts and drive shafts
NOTE
Mechanical
i Cardan shafts:
Contact us.
electric
Cross-braces
CASE CNH RENAULT CLAAS VALTRA
314960 6005003111 35852400
1342703C1 7701025155 31795510
1342711C1 6000104220
etc... etc... LANDINI
diesel
1423444
NEW HOLLAND CNH LAMBORGHINI 3541458M1
83930383 2124632610 etc...
83958381 146-4632-6/10
83961171 etc... STEYR
etc... 33700421017
SAME 37700420715
JOHN DEERE 00966963 etc...
AL110149 0900011104
Services
AL32994 etc... FENDT
AL64127 F166301021080
etc... MATBRO F168302020490
500278 etc...
KHD DEUTZ 500279
4300771 501106 MASSEY FERGUSSON
4322739 etc... 1423444M1
4362929 1429021M1
Appendices
etc... JCB 3310490M1

91403402 etc...
FIAT 91410803
9937092 91435401
9956514 etc...
9962244
etc...
www.symko.fr
6 . specific tooling
/ Specific tooling kits
after sales
& spare parts
The specific tool kits consist

of tools needed to repair
the CARRARO transmission
equipments most commonly
installed by manufacturers.
Benches
Thanks to the CARRARO mounting bench you will be able to
ensure the complete disassembly and reassembly services in
complete safety.
Technical catalogues
Specific tooling as well as assembly instructions will enable you to carry out a disassembly
and reassembly of quality according to CARRARO’s recommendations. You will have at
your disposal all the dimensions of adjustment, the determination of the different shims of
adjustment, the conical distance, the preload on the bearings, as much points that must be
strictly respected.
« The technology of the current transmissions allows

remarkable performances, but also requires a
precise and irreproachable quality of maintenance. »
www.symko.fr
III.
PART
Electrical parts
and components
1. Joysticks
2. Electrical control units
/ Joysticks
Characteristics
BBHandles adaptable to valves with manual
controls, or joysticks.
BBFrom 1 to 8 functions depending on the handle. COBRA joystick
BBPossibility of proportional functions. Reference Nbr of functions
SYMCOBRA3 3
SYMCOBRA4 4
Ergonomic joystick
Reference Nbr of functions

SYMERGO2 2
SYMERGO3 3
Selector joystick
SYMERGO4 4 Reference Nbr of functions
SYMERGO6 6 SYMCOP1B 1
SYMERGO8 8 SYMCOP2I 2
PVG joysticks
Prof 1
Nbr of functions “all or Nrb of proportional
Reference Symbol
nothing” functions
162F1104S 4 2
162F1107S 2 3
PVRE joysticks
PVRE
Reference On/Off functions Proportional functions Symbol
162F1300S 1 2
162F1301S / 2
162F1302S 1 1
162F1303S / 1
162F1304S / 3
www.symko.fr
PVRET joysticks
Hydraulic
PVRET
Proportional
Reference On/Off functions Symbol
functions
162F1305S / 3
Mechanical
PVREL joysticks
PVREL
Reference Functions Symbol
155U2601S 1 proportional function
155U2605S 1 maintained proportional function with neutral switch
155U2602S 1 maintained proportional function
electronic
155U2606S 1 maintained proportional function with neutral switch
155U2603S 1 proportional function with lock
155U2607S 1 proportional function with lock and neutral switch
PVRES joystiks
Reference Prportional functions Mechanical locking Symbol
diesel
155B4210S 1 :
155B4211S 1 Yes
155B4212S 2 /
Services
/ Electrical control units

Appendices
NOTE
i For all demand: contact us
www.symko.fr
IV.
PART
Components
for diesel engines
1. Injection systems
2. Starters and
alternators
3. Accessories
1 . injection systems
/ Injection pumps
Hydraulic
Official distributor
We are able to supply to you the complete range of injection
pumps and new injectors.
Please contact us with the manufacturer’s references of the

following brands:
Mechanical
AGCO JOHN DEERE
CATERPILLAR KOMATSU
CLAAS LIEBHERR
CNH MASSEY FERGUSON
CUMMINS SAME DEUTZ FAHR
DEUTZ TEREX
DOOSAN VOLVO CE
FENDT VOLVO PENTA
JCB
electronic
NOTE
i For Bosch range: contact us
/ Injectors
diesel
following brands:
AGCO DEUTZ
CLAAS KOMATSU
CNH SAME DEUTZ FAHR
Services
CUMMINS VOLVO CE
NOTE
Appendices
www.symko.fr
2 . Starters and alternators
/ Starters
Official distributor
We are able to propose you the complete range of new
starters and alternators.

following brands:
CATERPILLAR KOMATSU
CLAAS LIEBHERR
CNH LINDE MATERIAL HANDLING
DEUTZ TEREX
DOOSAN VOLVO CE
JOHN DEERE
NOTE
/ Alternators
following brands:
AGCO KAESSBOHRER
CLAAS KOMATSU
CNH LIEBHERR
DEUTZ TEREX
DOOSAN VOLVO CE
JOHN DEERE
NOTE
www.symko.fr
3 . Accessories
/ Battery chargers
Hydraulic
C1 battery charger
Nominal characteristics (elementary)
Nominal voltage 220–240 V~ 50/60 Hz
Switch-on current < 50 A
Input power maxi. 0,6 A (actual value)
Power consumption 60 W
Mechanical
Nominal characteristics (secondary)
Rated voltage 12 V
Charge voltage 14,7 V (±0,25 V)
Charge current 3,5 A (±10%)
Output current 3,5 A
Ripple maxi. 150 mV Reference
Return current < 5 mA (no AC port)

SYMCBC1
IP 65
Protection type
(Dustproof, waterproof)
batterie au plomb 12 V
Battery type
electronic
(Standard, EFB, GEL, open and VRLA)
Battery capacity 12 V: 5 Ah –120 Ah
Sound level < 50 dB
Ambient temperature 0 to 40°C
Accessories Hanging hook provided
C3 battery charger
diesel

Rated voltage 6 V/12 V
7,2 V (±0,25 V)
Charge voltage 14,4 V (± 0,25 V)
14,7 V (± 0,25 V)
0,8 A (±10%)
Charge current
Services
3,8 A (± 10 %)
Output current 0,8 A/3,8 A Reference
Ripple maxi. 150 mV
SYMCBC3
Return current < 5 mA (actual value)
IP 65
Protection type
batterie au plomb 6 V, 12 V
Battery type
(AGM, GEL, open and VRLA)
6 V: 1,2-14 Ah
Battery capacity
12 V: 1,2-120 Ah
Appendices
Sound level < 50 dB(A)
Accessories Hanging hook provided
www.symko.fr
3 . Accessories
C7 battery charger

Rated voltage 12 V/24 V
13,6 V/16,5 V (± 0,25 V)
Charge voltage 14,4 V/14,7 V (± 0,25 V)
28,8 V/29,4 V (± 2 %)
1,5 A (±20%) Reference
3,5 A (± 10 %)
Charge current
5,0 A (± 10 %)
7,0 A (± 10 %) SYMCBC7
Output current 3,5 A /7,0 A
Ripple maxi. 150 mV
Return current < 5 mA (no AC port)

IP 65
Protection type
lead acid battery 12 V, 24 V
Battery type
(AGM, GEL, open and VRLA)
12 V: 14-230 Ah
Battery capacity
24 V: 14-120 Ah
Sound level < 50 dB(A)
Accessories Wall mounting provided
Characteristics and functions

C1 C3 C7
6 V / 12 V, lead-acid AGM, EFB, GEL, Open, 12 V / 24 V, lead-acid AGM, EFB, GEL, Open,
Batteries 12 V, lead-acid, EFB, GEL, Open, VRLA
VRLA VRLA
6 V: 1,2 Ah-14 Ah 12 V: 14 Ah-230 Ah
Battery capacity 12 V: 5 Ah-120 Ah
12 V: 1,2 Ah-120 Ah 24 V: 14 Ah-120 Ah
Automatic charge
Trickle charge
Memory function -
Regeneration mode - -
Power mode/Support mode
Allows to power 12V devices.
- -
(Allows to save the vehicle parameters
when changing the battery.)
Functions and safety accessories

C1 C3 C7
Protection against sparks
Protection againt short circuit/inverted
connection
Protection againt overheating
Suspension hook -
Wall mounting - -
www.symko.fr
V.
PART
Services
1
2 4
3 7
6
5
19
26
20 19
21
17
22
16
23
18
24
25
8
/ Axles, final drives
and gearboxes repairs
All brand repairs
BBCARRARO
BBBONDIOLI
BBDANA
BBZF
BBPoclain
BBOthers...
TECHNODRIVE
facilities
BBA workshop dedicated to the repair with specific tooling.
BBAn important stock of parts available.
BBA specialized 6-technician team, trained by our partner brands.
Authorized
repair center
Authorized
repair center
www.symko.fr
Since 2007, more than 5000 pumps, hydraulic motors and hydrostatic transmissions have been
repaired in our workshops.
Hydraulic
/ Hydraulic repairs
All brand repairs
BBBondioli
BBBosch Rexroth
Mechanical
BBHydac
BBDanfoss
BBBrueninguaus Hydromatik
BBRexroth Authorized repair
center
BBPoclain
BBSauer
BBLinde
BBDenison
BBParker / Volvo
electronic
BBEaton Authorized repair Authorized repair
BBVickers center center
BBKayaba
BBKawasaki
BBCessna
BBOthers…
diesel
Services
Appendices
> Watch the complete disassembly and

reassembly of a piston pump.
Scan the QR code above with an app like MobileTag

(free on the AppStore).
www.symko.fr
Facilities
BBA specific workshop dedicated to the repair.
BBAn important stock of parts available.
BBA specialized 6-technicians team, trained by our partner brands.
Test bench
BBPower generation: 75, 184, 259 or 319 KW.
BBMaximum flow: 500 liters/minute.
BBMaximum pressure: 400 bar.
The systematic test of all pumps, motors and hydraulic transmissions repaired in our workshops
guarantees our customers that the repair is in accordance with the recommendations of the
manufacturers.
www.symko.fr
VI.
PART
Appendices
1. Unit conversion table
2. Hosepipes assembly
3. P
ipe diameter
4. Thread sizes
5. SAE flanges dimensions
6. Example of an analysis report
7. Cylinders: output, pressure and
size
8. H
ydraulic pumps and motors
9. H
ow to recognizet the origin of an
axle ?
10. Repair request
11. Return request for credit note
/ Unit conversion table
Unit of in Multiplied by Unit of in Multiplied by
1 pound/inch2 psl bar 0.06895 1 Inch In m 0.0254
1 bar bar psl 14.5 1 mètre m Inch 39.370

Length
1 pound/inch2 psl MPa 0.006895 1 foot ft m 0.3048
1 méga Pascal MPa psl 145.035 1 mètre m ft 3.281
Pressure
1 klo Pascal kPa bar 0.01 1 inch2 In2 m2 645.16
Surface
1 bar bar kPa 100 1 mètre2 m2 ln2 1550
1 méga Pascal MPa bar 10 1 gallon (UK) gal l 4.546
1 bar bar MPa 0.1 1 litre l gal (UK) 0.22
Volume
1 gallon/minute (UK) gal/min. l/mm 4.546 1 gallon (US) gal l 3.78
Flow 1 litre/minute l/min. gal/min. (UK) 0.22 1 litre l gal (US) 0.264
rate gallon/minute (US) gal/min. l/min. 3.78 1 pound lb kg 0.454
Weight
1 litre/min. l/min. gal/min. (US) 0.264 1 kilo kg lb 2.205
1 pound/inch lb/in Nm 0.113 1 foot/SYMnde ft/s m/s 0.3048
Speed
1 Newton/mètre Nm lb/in 8.85 1 mètre/SYMnde m/s ft/s 3.281
Torque
1 pound/foot lb/ft Nm 1.356 degré Farenheit °F °C 5/9x(°F-32)
Temperature
1 Newton/foot Nm b/ft 0.7374 degré Celsius °C °F (9/5xC°)+32
/ Hosepipes assembly
www.symko.fr
/ Pipe diameter
Hydraulic
Mechanical
electronic
diesel
Services
Example:
For a 40l/min flow and a speed of 5m/s in pressure line, the

recommended pipe’s will be DN12
Appendices
www.symko.fr
/ Thread sizes
Conical BSPT
Designation Thread DE DA
5x10 1/8’’ G 10 8.5
8x13 1/4’’ G 13.6 11.4
12x17 3/8’’ G 17.1 14.9
15x21 1/2’’ G 21.6 18.6
16x23 5/8’’ G 23.6 20.6
21x27 3/4’’ G 27.1 24.1
26x34 1’’ G 34 30.3
33x42 1’’1/4 G 42.7 38.9
40x49 1’’1/2 G 48.6 44.8 Male Gas – MG
50x60 2’’G 60.5 56.6
Female Gas – FG
NPT – BRIGGS
1/8’’ BGS 1/8’’-27 10.4 8.8
1/4’’ BGS 1/4’’-18 13.8 11.4
3/8’’ BGS 3/8’’-18 17.3 15.1
1/2’’ BGS 1/2’’-14 21.6 18.5
3/4’’ BGS 3/4’’-14 26.9 23.6
1’’ BGS 1’’-11.5 33.7 29.8
1’’1/4 BGS 1’’1/4-11.5 42.4 38.6
1’’1/2 BGS 1’’1/2-11.5 48.6 44.8
Male Briggs – MG
2’’BGS 2’’-11.5 60.6 56.8
Female Briggs – FG
JIC-SAE
7/16’’ 7/16’’-24 11.1 9.7
1/2’’ 1/2’’-20 12.7 11.3
9/16 ’ 9/16 ’ -18 14.2 12.7
3/4’’ 3/4’’-16 19 17.3
7/8’’ 7/8’’-14 22.2 20.2
1’’ 1/16 1’’ 1/16-12 26.9 24.6
1’’ 3/16 1’’ 3/16-12 30.1 27.8
1’’ 5/16 1’’ 5/16-12 33.3 31
1’’ 5/8 1’’ 5/8-12 41.2 38.9
1’’ 7/8 1’’ 7/8-12 47.6 45.3 Male Jic – MJ
2’’ 1/2 2’’ 1/2-12 63.5 61.2 Turning Jic – TJ
60° conical BSPP

1/8’’ 1/8’’-28 9.7 8.5
1/4’’ 1/4’’-19 13.1 11.4
3/8’’ 3/8’’-19 16.6 14.9
1/2’’ 1/2’’-14 20.9 18.6
5/8’’ 5/8’’-14 22.9 20.6
3/4’’ 3/4’’-14 26.4 24.1
1’’ 1’’-11 33.2 30.3
1’’1/4 1’’1/4-11 41.9 38.9
1’’1/2 1’’1/2-11 47.8 44.8 Male BSP – MBSP
2’’ 2’’-11 59.6 56.6 Turning BSP – TBSP
www.symko.fr
Flat BSPP
Hydraulic
3/8’’ 3/8’’-19 16.6 14.9
1/2’’ 1/2’’-14 20.9 18.6
5/8 ’ 5/8 ’ -14 22.9 20.6
3/4’’ 3/4’’-14 26.4 24.1 Male Gas Cyl – MGCYL
7/8’’ 7/8’’-11 33.2 30.3 Turning flat bottom – FGT
Mechanical
ORS
9/16’’ 9/16’’-18 14.3 12.7
11/16’’ 11/16’’-16 17.5 15.7
13/16’’ 13/16’’-16 20.6 18.9
electronic
1’’ 1’’-14 25.4 23.5
1’’ 3/16 1’’ 3/16-12 30.2 27.9
1’’ 7/16 1’’ 7/16-12 36.5 34.2
1’’ 11/06 1’’ 11/06-12 42.8 40.6 Male ORS – MORS
2’’ 2’’-12 50.8 48.5 Turning ORS – TORS
TK Designation Thread DE DA
1/4’’ 1/4’’-19 13.1 11.4
3/8’’ 3/8’’-19 16.6 14.9
1/2’’ 1/2’’-14 20.9 18.6
5/8’’ 5/8’’-14 22.9 20.6
diesel
3/4’’ 3/4’’-14 26.4 24.1
1’’ 1’’-11 33.2 30.3
14x150 14x150 14 12.5

16x150 16x150 16 14.5
18x150 18x150 18 16.5
22x150 22x150 22 20.5
24x150 24x150 24 22.5
Turning Komatsu
30x150 30x150 30 28.5
Services
METRIC
Designation Thread DE DA Designation Thread DE DA
8x75 8x75 8 7.25 30x150 30x150 30 28.5
10x100 10x100 10 9 33x150 33x150 33 31.5
12x100 12x100 12 11 36x150 36x150 36 34.5
14x100 14x100 14 13 39x150 39x150 39 37.5
16x100 16x100 16 15 45x150 45x150 45 43.5

Appendices
48x150 48x150 48 46.5
12x150 12x150 12 10.5 52x150 52x150 52 50.5
14x150 14x150 14 12.5

30X200 30X200 30 28
16x150 16x150 16 14.5
36X200 36X200 36 34
French: 18x150 18x150 18 16.5
42X200 42X200 42 40
Metric – EFM/ETM 20x150 20x150 20 18.5
45X200 45X200 45 43
22x150 22x150 22 20.5
Gaz-EFG/ETG 24x150 24x150 24 22.5 52X200 52X200 52 50
German: 26x150 26x150 26 24.5 54X200 54X200 54 52

58X200 58X200 58 56
DIN 2353L-EFM/ETM 27x150 27x150 27 25.5
DIN 2353S-EFAF/ETAF
www.symko.fr
/ SAE flanges dimensions
3000 PSI
Collar O-ring Flange or ½ flange
DN A B Ø interior or Ø tore DN F ØD ØJ U ØT GG Q FF O
1/2 6.8 30.2 18.63 x 3.53 1/2 6.2 30.9 24.2 13 8.5 17.5 38.1 46 54
3/4 6.8 38.1 24.99 x 3.53 3/4 6.2 38.9 32.1 14 10.5 22.2 47.6 52 65
1 8.1 44/4 32.92 x 3.53 1 7.5 45.2 38.5 16 10.5 26.2 52.4 59 70
1 1/4 8.1 50.3 37.69 x 3.53 1 1/4 7.5 51.5 43.7 14 11.9 30.2 58.7 73 79
1 1/2 8.1 60.1 47.22 x 3.53 1 1/2 7.5 61 50.8 16 13.5 35.7 69.8 83 94
2 9.6 71.2 56.74 x 3.53 2 9 72.1 62.7 16 13.5 42.9 77.8 97 102
2 1/2 9.6 84.1 69.44 x 3.53 2 1/2 9 84.8 74.9 19 13.5 50.8 88.9 109 114
6000 PSI
Collar O-ring Flange or ½ flange
DN A B Ø interior or Ø tore DN F ØD ØJ U ØT GG Q FF O
1/2 7.8 31.8 18.63 x 3.53 1/25 7.2 32.5 24.6 16 8.5 18.2 40.5 48 56
3/4 8.9 41.3 24.99 x 3.53 3/4 8.2 42 32.5 19 10.5 23.8 50.8 60 71
1 9.6 47.6 32.92 x 3.53 1 9 48.4 38.8 24 11.9 27.7 57.1 70 81
1 1/4 10.4 53.8 37.69 x 3.53 1 1/4 9.8 54.7 44.4 27 13.5 31.7 66.7 78 95
1 1/2 12.7 63.5 47.22 x 3.53 1 1/2 12 64.3 51.5 30 16.6 36.5 79.4 95 113
2 12.7 79.1 56.74 x 3.53 2 12 80.1 67.5 37 19.8 44.4 96.8 114 133
www.symko.fr
www.symko.fr
SYMKO
/ Example of an analysis report
Appendices
Services diesel electronic Mechanical Hydraulic
/ Cylinders: output, pressure and size
Examples:
1 A 140 bar pressure applied to a piston of Ø 100 mm (S = 78.54 cm2) gives a theoretical force
greater than 10 000 N (10995 by calculation).
2 W
ith a Ø200 mm cylinder to overcome an 30 000 daN opposing force, a pressure greater than
90 bar (95, 49 by calculation) is required.
3 F or a force of 4 000 daN and an 80 bar available pressure, it is necessary to choose a Ø moni
80 mm cylinder (S = 79.8 cm2 by calculation).
www.symko.fr
/ Hydraulic pumps and motors
Hydraulic
Table of the relations between flow (L/min), pressure (bar) and
theoretical output (kW) >
Mechanical
electronic
diesel
Services
Appendices
www.symko.fr
Theoretical characteristics determination: torque, displacement and pressure >
www.symko.fr
Rotation reversal of a gear pump >
Hydraulic
1
Mechanical
3
electronic
4
diesel
5
Services
6
Appendices
8
7
www.symko.fr
www.symko.fr
/ How to recognized
the origin of an axle?
Hydraulic
The metal identification plate on the axletree or on the transmission is
the first way to recognize the axles. This plate gathers all the necessary
information to allow the identification of the product and to order the
corresponding parts:
BBModel of the transmission/axletree
BBSerial number of the transmission/axletree
Mechanical
In case of a missing identification plate, simply read the 5-digit number
in relief on the meltings (see pictures below). This code allows us to
identify the final product and, if needed, to suggest the appropriate
spare parts.
electronic
diesel
Fig.1 Wheel hub Fig.2 Central body
Services
Appendices
Fig.3 Differential support Fig.4 Crankcase
www.symko.fr
www.symko.fr
www.symko.fr
Appendices
Services diesel electronic Mechanical Hydraulic
www.symko.fr
VII.
PART
General
Terms & Conditions
SYMKO
/ General Terms and Conditions
The acceptance of our offers implies the adherence to our general terms and conditions hereafter:
Orders
Our offers are always made without commitment. The sales contract being perfect only after written
acceptance of the order by us. The very fact of placing an order includes the customer acceptance of
the general terms and conditions without restriction nor reserve. Unless express agreements between
the parties, the terms of our general terms and conditions cancel any contrary provisions which may
appear in the conditions of purchase of our customers.
Delivery Time
Delivery times are only indicative. The delay for any reason whatsoever cannot, in any case, be invoked
as a cause of cancellation and does not entitle to any compensation nor penalty unless otherwise
agreed.
TRANSPORTS
The goods travel at the buyer’s risk, whatever the mode of transport, and are always shipped in due
postage. Any disputes regarding the transport such as delay or not arrived at the destination, missing,
deterioration of the goods, etc. must be settled by the consignee with the carrier.
PRIces
Our prices are invoiced on the basis of the rates in effect on the day of delivery, and exclude net taxes
departure from our workshops.
PAyments
The deadlines fixed in our order confirmation are compulsory. Any delays in payments shall ipso jure
involve the payment of default interests at the statutory rate in force at the date of expiry. All our invoices
are payable to NANTES. The creation of bills of exchange or the acceptance of commercial bills shall
apply neither novation nor derogation from this clause conferring jurisdiction.
www.symko.fr
SYMKO
Penalty clause
In default of payment at maturity and without formal notice, the purchaser must pay in addition to the
price, a late fee fixed at 1.5% per month, as well as a lump-sum indemnity for recovery costs of 40 euros.
Moreover, in the event of litigation, a penalty clause of a lump sum of 15% of the sums will be due,
fixed as damages with a minimum fee of 50 euros. Any advance payment entitles you to a discount
calculated at the rate of 0.50% per complete month.
Dispute
In the event of a dispute, the Commercial Court of Nantes is solely competent, even in case of plurality
of defendants and whatever the quality of the defendants, of incidental claim, of calling a guarantee
and notwithstanding any clauses to the contrary printed on the buyer purchase orders.
Studies, Projects, Plans and Models

Studies, projects, plans and models emanating from our company remain our property, and cannot be
communicated, reproduced or executed, even partially, in any way without written authorization.
The documents, of any kind, established by our services remain our property and must be returned to us
on request.
Responsibilities
It is expressly agreed that the seller cannot in any way be held responsible for non-material damage,
whether or not resulting from damage to property, such as operating losses, costs or expenses arising
from the unavailability of the equipment concerned, suffered by third parties, etc. (Non-limiting list).
Title clause
The ownership of the goods is reserved to the seller until full payment of the price. The goods delivered
are deposited with the purchaser in accordance with articles 1915 and following of the Civil Code
(Law n° 80 335 of 12 May 1980).
www.symko.fr
Notes
www.symko.fr
NOTES
www.symko.fr
reference index
# D H
2-way valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Dana. . . . . . . . . . . . . . . . . . . . 3, 112, 113, 114, 126 Hand pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3-point chassis hydraulic unit. . . . . . . . . . . . . . 98 Danfoss . . . . . . . . . . . . . . . . . . . . . . . 3, 45, 61, 127 Hidromek . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
3-way valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 David Brown. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 HMG 500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
6-way selectors. . . . . . . . . . . . . . . . . . . . . . . . . . 68 Denison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 HMG 2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
8-way selectors. . . . . . . . . . . . . . . . . . . . . . . . . . 68 Deutz. . . . . . . . . . . . . . 11 to 15, 34, 38, 45, 63, 111, Holder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
. . . . . . . . . . . . . . . . . . . . . 113, 114, 115, 121, 122 Hosepipes assembly . . . . . . . . . . . . . . . . . . . . 130
Dexheimer. . . . . . . . . . . . . . . . . . . . . 111, 113, 114 Hurliman. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
A Digital manometers . . . . . . . . . . . . . . . . . 101, 102
DitchWitch. . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Hydac. . . . . . . . . . . . . . . . . . . 84, 87 to 89, 91, 104
Hydraulic brake cylinders . . . . . . . . . . . . . . . . . 82
Accessories for hydraulic units. . . . . . . . . . . . . 99 Double acting cylinders . . . . . . . . . . . . . 72 to 79 Hydraulic kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Accumulator inflation . . . . . . . . . . . . . . . . . . . . 91 Double control cable. . . . . . . . . . . . . . . . . . . . . 70 Hydraulic motors. . . . . . . . . . . . 47 to 62, 137, 138
Accumulators . . . . . . . . . . . . . . . . . . . . . . . . 90, 91 Drive shafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Hydraulic repairs. . . . . . . . . . . . . . . . . . . . . . . . 127
Adjustable flow dividers. . . . . . . . . . . . . . . . . . . 94 Hydraulic stands. . . . . . . . . . . . . . . . . . . . . . . . . 83
Hydraulic units. . . . . . . . . . . . . . . . . . . . . 97 to 100
E
Air coolers . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 93
Agco. . . . . . . . . . . . . . . . . . 111, 113, 114, 121, 122 Hydraulic units tanks . . . . . . . . . . . . . . . . . . . . . 99
Agrale. . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114 Hydrema . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Alcelik. . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114 Eaton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Hydro Leduc . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Alma. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Electrically controlled valves. . . . . . . . . . . . . . . 67 Hydropneumatic suspension. . . . . . . . . . . . . . 90
Alternators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Electric control box. . . . . . . . . . . . . . . . . . . . . . 119 Hydrostatic transmissions . . . . . . . . . . . . . . . . . 62
Aluminium flanges. . . . . . . . . . . . . . . . . . . . 41, 42 Electric controls. . . . . . . . . . . . . . . . . . . . . . . . . 119 Hyster . . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Analyse report. . . . . . . . . . . . . . . . . . . . . . . . . . 135 Electronic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
I
Astec. . . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114 Erkunt . . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Axles parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Escorts . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
In-line filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
B F Injection pumps. . . . . . . . . . . . . . . . . . . . . . . . 121
Injectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Bare cylinders . . . . . . . . . . . . . . . . . . . . . . 73 to 79 Fai-Komatsu. . . . . . . . . . . . . . . . . . . . 111, 113, 114 Instrumentation. . . . . . . . . . . . . . . . . . . . . 101, 102
Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Farmtrac. . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
J
Battery chargers. . . . . . . . . . . . . . . . . . . . 123, 124 FCU 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Bench mounting. . . . . . . . . . . . . . . . . . . . . . . . 116 Fendt. . . . . . . . . . . . 15, 37, 44, 63, 111 to 115, 121
Bélarus . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114 Fermec. . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Bidirectional flow-limiting valve. . . . . . . . . . . . . 94 Fiat . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 to 19, 115 JLG . . . . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Bobard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 87 Fiat-Hitachi. . . . . . . . . . . . . . . . . . . . . 111, 113, 114 John Deere . . . . . . . . . . 20, 35, 37, 45, 61, 63, 111,
Bobcat. . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114 Filling units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 . . . . . . . . . . . . . . . . . . . . . 113, 114, 115, 121, 122
Bondioli . . . . . 3, 4, 39, 53, 59, 62, 66, 70, 126, 127 Final drive parts. . . . . . . . . . . . . . . . . . . . . . . . 114 Joysticks. . . . . . . . . . . . . . . . . . . . . . . . . . . 118, 119
Bosch Rexroth . . . . . . . . . . . . . . . . . . 3, 39, 61, 127 Pressure connection hoses. . . . . . . . . . . . . . . 130 Jungheinrich. . . . . . . . . . . . . . . . . . . 111, 113, 114
Brueninguaus Hydromatik. . . . . . . . . . . . . . . . 127 Flow dividers/limiting valves. . . . . . . . . . . . . . . 94
Buhler. . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114 Ford. . . . . . . . . . . . . . . . . . . 16 to 19, 111, 113, 114
FPU 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
FSA type level indicator. . . . . . . . . . . . . . . . . . 100 K
C FSK type electrical indicator. . . . . . . . . . . . . . 100 KM motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
KP motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
G
Cardan shaft. . . . . . . . . . . . . . . . . . . . . . . . . . . 115 KR motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Cast iron flanges. . . . . . . . . . . . . . . . . . . . . . . . . 42 KS motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
CCLS piston pumps . . . . . . . . . . . . . . . . . 36 to 38 Kit gearboxes / pumps . . . . . . . . . . . . . . . . . . 110
Control cables . . . . . . . . . . . . . . . . . . . . . . . . . . 70 G series motors. . . . . . . . . . . . . . . . . . . . . . . . . . 59 Kawasaki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Capillary cables. . . . . . . . . . . . . . . . . . . . 103, 105 Gear motors . . . . . . . . . . . . . . . . . . . . . . . 57 to 60 Kayaba. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Carraro (tractors). . . . . . . . . . . . . 8, 111, 113, 114 Gear pumps . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 34 Komatsu. . . . . . . . . . . 111, 113, 114, 121, 122, 133
Carraro. . . . . . . . . . . . . . 3, 112, 113, 114, 116, 126 Gearboxes. . . . . . . . . . . . . . . . . . . . . . . 3, 113, 126 Kramer . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Carraro repair kit. . . . . . . . . . . . . . . . . . . . . . . . 116 Gearboxes parts. . . . . . . . . . . . . . . . . . . . . . . . 113
Case. . . . . . . . . . . . . . . . . . . 63, 111, 113, 114, 115 Gehl . . . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Case IH. . . . . . . . . . 9, 10, 36, 44, 61, 111, 113, 114 Gerotor motors . . . . . . . . . . . . . . . . . . . . . 47 to 56
Caterpillar . . . . . . . . . . . . . 111, 113, 114, 121, 122 Grape harvester . . . . . . . . . . . . . . . . . . . . . . . 8, 87
Cessna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Grape harvester filtration. . . . . . . . . . . . . . . . . . 87
Changlin . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114 Grégoire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 92
Circuit selectors. . . . . . . . . . . . . . . . . . . . . . . . . 68
Claas . . . . . . . . . . . . . . . . 26 to 29, 35, 36, 45, 111, .
. . . . . . . . . . . . . . . . . . . . . 113, 114, 115, 121, 122
Check valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Clogging indicator. . . . . . . . . . . . . . . . . . . . 85, 89
Cobra joystick. . . . . . . . . . . . . . . . . . . . . . . . . . 118
Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Combine harvesters. . . . . . . . . . . . . . . . 34, 35, 45
Compact hydraulic units . . . . . . . . . . . . . . . . . 97
Complete axles. . . . . . . . . . . . . 111, 112, 126, 141
Complete couplings . . . . . . . . . . . . . . . . . . . . . 43
Complete speed reducers . . . . . . . . . . . . . . . 114
Connecting sleeves. . . . . . . . . . . . . . . . . . . . . 109
Contactors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Control and measure devices . . . 88, 101 to 105
Cross-braces. . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Cylinders . . . . . . . . . . . . . . . . . . . . . . 71 to 83, 136
www.symko.fr
reference index
L P T
L series motors. . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Parker/Volvo . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Tank filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Lamborghini . . . . . . . . . . . . 21, 111, 113, 114, 115 Pellenc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Tata. . . . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Landini. . . . . . . . . . . . . . 22, 23, 111, 113, 114, 115 Pipe diameter . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Terex . . . . . . . . . . . . . . . . . . 111, 113, 114, 121, 122
Leduc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Poclain. . . . . . . . . . . . . . . . . . . . . . . . . . . . 126, 127 Telescopic cylinders. . . . . . . . . . . . . . . . . . . . . . 80
Liebherr . . . . . . . . . . . . . . . 111, 113, 114, 121, 122 Piston motors. . . . . . . . . . . . . . . . . . . . . . . . . 61, 62 Telescopic stands. . . . . . . . . . . . . . . . . . . . . . . . 83
Linde. . . . . . . . . . . . . 3, 44, 111, 113, 114, 122, 127 Piston pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Temperature sensors . . . . . . . . . . . . . . . . . . . . . 92
Log splitter cylinders. . . . . . . . . . . . . . . . . . . . . . 81 Portable filtering . . . . . . . . . . . . . . . . . . . . . . . . . 89 Thread dimensions. . . . . . . . . . . . . . . . . . 132, 133
Loiseau. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Pressure control. . . . . . . . . . . . . . . . . . . 101 to 105 Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . 101 to 105
Low pressure control kit . . . . . . . . . . . . . . . . . . . 67 Pressure filters. . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Toyota. . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Pressure reducers. . . . . . . . . . . . . . . . . . . . . . . . 94 Tractor pumps. . . . . . . . . . . . . . . . . . . . . . . 8 to 33
Pressure plugs. . . . . . . . . . . . . . . . . . . . . . . . . . 103 Transmission oil. . . . . . . . . . . . . . . . . 111, 113, 114
M Proportional valves. . . . . . . . . . . . . . . . . . . . . . . 69
Pumps definition sheet . . . . . . . . . . . . . . . . . . 140
Turolla. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Pump drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

U
Mahindra. . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Manometers cases. . . . . . . . . . . . . . . . . . . . . 101 Pumps repairs. . . . . . . . . . . . . . . . . . . . . . . . . . 127
Manitou . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 PVG32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Manometers . . . . . . . . . . . . . . . . . . . . . . . . 01, 102 PVG valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Unidirectional flow-limiting valve . . . . . . . . . . . 94
Massey-Ferguson . . . . . . 24, 25, 38, 61, 63, 90, 92 Unit conversion. . . . . . . . . . . . . . . . . . . . . . . . . 130
R
Matbro. . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114 Uzel. . . . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Mc Cormick. . . . . . . . . . . 23, 38, 45, 111, 113, 114
Mechanical transmissions. . . . . 107 to 115, 126
Micro-cylinder. . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Mobile depollution unit. . . . . . . . . . . . . . . . . . . 89
Remanufacturing. . . . . . . . . . . . . . . 6, 44, 46, 113
Renault. . . . . . . . . . . . . . . . . . . . 111, 113, 114, 115 V
Modular directional control valves . . . . . . 65, 66 Renault/Claas. . . . . . . . . . . . . . . . . . 26 to 29, 115 Valtra-Valmet. . . . . . . . . 23, 69, 111, 113, 114, 115
Monoblock directional control valves. . . . 64, 66 Repairs. . . . . . . . . . . . . . . . . . . . . . . . . . 126 to 128 Valve parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Mounting sleeves. . . . . . . . . . . . . . . . . . . . . . . . 70 Repair request. . . . . . . . . . . . . . . . . . . . . . 142, 143 Valve coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Multiples bases. . . . . . . . . . . . . . . . . . . . . . . . . . 67 Return request. . . . . . . . . . . . . . . . . . . . . . . . . . 144 Valve controls . . . . . . . . . . . . . . . . . . . . . . . 70, 118
MUST series motors. . . . . . . . . . . . . . . . . . . . . . . 60 Rexroth. . . . . . . . . . . . . . . . . . . . 39, 57, 61, 63, 127 Valves. . . . . . . . . . . . . . . . . . . . . . . . . . 63 to 70, 96
Venieri. . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
N S
Vickers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 127
Volvo. . . . . . . . . . . . . . 111, 113, 114, 121, 122, 127
Neuson. . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114 SAE flanges . . . . . . . . . . . . . . . . . . . . . . . . . 42, 134

New Holland . . . . . . . . 16 to 19, 34, 36, 61, 63, 87,
. . . . . . . . . . . . . . . . . . . . . . 92, 111, 113, 114, 115
Sambron . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Same . . . . . . . . . . . . . . . 30, 31, 38, 45, 61, 63, 111, X
. . . . . . . . . . . . . . . . . . . . . 113, 114, 115, 121, 122 XCMG. . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Sauer . . . . . . . . . . . . . . . . . . . . . . . . 10, 44, 61, 127
O Scraper units. . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Sealing. . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85, 89
Y
O&K. . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114, 115 Seals. . . . . . . . . . . . . . . . . . . . . . . . . . . 48 to 50, 61
OM . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114, 115 Seals kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Yale. . . . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
OMM motors. . . . . . . . . . . . . . . . . . . . . . . . . 47, 48 Sennebogen. . . . . . . . . . . . . . . . . . . 111, 113, 114
OMP motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Silagers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35
OMR motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
OMS motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
OMT motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Single acting cylinders . . . . . . . . . . . . . . . . . . . 71
Single control cable. . . . . . . . . . . . . . . . . . . . . . 70
Solenoid valves. . . . . . . . . . . . . . . . . . . . . . . . . . 67
Z
Zetor . . . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
OMV motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Specific tooling kit. . . . . . . . . . . . . . . . . . . . . . 116 ZF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Origin of an axle. . . . . . . . . . . . . . . . . . . . 112, 141 Splitter gearboxes. . . . . . . . . . . . . . . . . . . . . . . 107
Starters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Steel flanges . . . . . . . . . . . . . . . . . . . . . . . . . 41, 42
Steering units. . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Steyr . . . . . . . . . . . . . . . . . . . . . . 32, 33, 44, 63, 115
Still. . . . . . . . . . . . . . . . . . . . . . . . . . . . 111, 113, 114
Suction strainer. . . . . . . . . . . . . . . . . . . . . . . . . . 84
www.symko.fr
TECHNODRIVE
Rue de la Guillauderie Phone +33 2 51 70 13 13

Parc d’activités de Tournebride Fax +33 2 51 70 04 04
44118 LA CHEVROLIÈRE [email protected]
France www.symko.fr
V3.10.E - June 2017 - Created & printed by KelCom.fr
> Watch the complete disassembly and

reassembly of a piston pump.
Scan the QR code above with an app like MobileTag

(free on the AppStore).

Catalogue Symko en 2017

Uploaded by

Copyright:

Available Formats

Catalogue Symko en 2017

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogue Symko en 2017

Uploaded by

Copyright:

Available Formats

Parts and components

3.Valves 7.Heat exchangers and coolers

Hydraulic measuring instruments. . . . . . . . . . . . . . . . 104

III. Electrical parts and

VI. General Terms and

BB3 traveling technical sales representatives throughout the

A complete stock for a greater responsiveness

BBMore than 6,000 references, 70,000 parts available.

A unique technical service

Fig.1 Type of Displacement Rotation Type of drive

5,5 0 510 325 006

Type of Displacement Rotation Type of drive

321 11 R CONE 1/5 Simple 0 510 525 009 fig. 5

5500 11 L CONE 1/8 Lifting pump 0 510 525 313 fig. 6

7000 16 R CONE 1/8 Lifting pump 0 510 625 016 fig. 6

0 510 525 344

Lifting & Sterring

Type of Displacement Rotation Type of drive

DAVID BROWN TRACTORS

Type of Displacement Rotation Type of drive

1200 11 L CONE 1/8 Lifting 0 510 525 313 fig. 7

D6006 11 0 510 515 323

D8006 16 Lifting 0 510 615 326 fig. 2

DX80 16 + 11 L CONE 1/5 Lifting 0 510 665 382 fig. 3

Type of Displacement Rotation Type of drive

Fig.1 DX86 16 + 11 0 510 665 382

Fig.2 DX160 19 L CONE 1/5 Lifting 0 510 615 338 fig. 1

14 CONE 1/5 0 510 515 316 fig. 1

Type of Displacement Rotation Type of drive

0 510 615 326

0 510 665 424

(ex 0 510 665 335)

Type of Displacement Rotation Type of drive

8 L Sterring 0 510 425 309 (A18X)

8 R Sterring 0 510 425 032 (C18X)

11 R Sterring 0 510 525 046 (C25X)

480 11 R CONE 1/8 Sterring 0 510 525 046 (C25X) fig. 1

580 8 R Sterring 0 510 425 032 (C18X)

5.5 L CYL 17.4 PDF 0 510 325 316 (A14X)

SOM 30 B 8 L CONE 1/8 Lifting 0 510 425 309 (A18X) fig. 1

550 11 L CONE 1/8 Lifting 0 510 525 357 (A25X) fig. 1

8 R 0 510 425 032 (C18X)

11 L Sterring 0 510 525 357 (A25X)

Type of Displacement Rotation Type of drive

11 L Lifting 0 510 525 357 (A25X)

800 8 R CONE 1/8 Lifting 0 510 425 032 (C18X) fig. 1

8 R Sterring 0 510 425 032 (C18X) fig. 1

8 R Sterring 0 510 425 032 (C18X)

415 8 R CONE 1/8 Lifting 0 510 425 032 (C18X) fig. 1

11 R Sterring 0 510 525 046 (C25X)

11 R Sterring 1 cylinder 0 510 525 060 (C25XRP) fig. 2

11 R Sterring 2RM 0 510 525 060 (C25XRP) fig. 2

11 R Sterring 1 cylinder 0 510 525 060 (C25XRP) fig. 2

Fig.1 90.90 14 R Sterring 2 cylinders 0 510 525 059 (C31XRP) fig. 2

11 R Sterring 0 510 525 060 (C25XRP) fig. 2

11 Sterring 0 510 525 046 (C25X)

19 L Sterring 0 510 625 366 (C42XRP2) fig. 2

25 R Lifting 0 510 725 085 fig. 1

Type of Displacement Rotation Type of drive

3.Valves 7.Heat exchangers and coolers

III. Electrical parts and

VI. General Terms and