User Guide Lenovo Yoga s5

User Guide
ThinkPad Yoga 15
Note: Before using this information and the product it supports, be sure to read and understand the following:
• Safety, Warranty, and Setup Guide
• Regulatory Notice
• “Important safety information” on page vi
• Appendix E “Notices” on page 155
The Safety, Warranty, and Setup Guide and the Regulatory Notice have been uploaded to the Web site. To
refer to them, go to http://www.lenovo.com/UserManuals and follow the instructions on the screen.
First Edition (December 2014)

© Copyright Lenovo 2014.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration
“GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
Contents
Read this first . . . . . . . . . . . . . . v Trackpad touch gestures . . . . . . . . . 39

Important safety information . . . . . . . . . . vi Customizing the ThinkPad pointing device . . 40
Conditions that require immediate action . . vii Replacing the cap of pointing stick . . . . . 40
Safety guidelines . . . . . . . . . . . . vii Power management . . . . . . . . . . . . 41
Checking the battery status . . . . . . . . 41
Chapter 1. Product overview . . . . . . 1 Using the ac power . . . . . . . . . . . 42
Locating computer controls, connectors, and Charging the battery . . . . . . . . . . 42
indicators. . . . . . . . . . . . . . . . . . 1
Maximizing the battery life . . . . . . . . 43
Front view for models with a 2D camera . . . . 1
Managing the battery power . . . . . . . 43
Front view for models with a 3D camera . . . . 3
Power-saving modes . . . . . . . . . . 43
Right-side view. . . . . . . . . . . . . . 4
Connecting to the network . . . . . . . . . . 44
Left-side view . . . . . . . . . . . . . . 6
Ethernet connections . . . . . . . . . . 44
Bottom view . . . . . . . . . . . . . . . 8
Wireless connections . . . . . . . . . . 44
Rear view . . . . . . . . . . . . . . . . 8
Using an external display . . . . . . . . . . 48
Status indicators . . . . . . . . . . . . . 9
Connecting an external display . . . . . . 48
Locating important product information . . . . . 10
Choosing a display mode . . . . . . . . 49
Machine type and model label . . . . . . . 10
Changing display settings . . . . . . . . 49
FCC ID and IC Certification information . . . 10
Using audio features . . . . . . . . . . . . 49
Certificate of Authenticity label . . . . . . 12
Using the camera . . . . . . . . . . . . . 50
Genuine Microsoft label . . . . . . . . . 12
Using a flash media card. . . . . . . . . . . 51
Features . . . . . . . . . . . . . . . . . 13
Specifications . . . . . . . . . . . . . . . 14 Chapter 3. Enhancing your
Operating environment . . . . . . . . . . . 15 computer . . . . . . . . . . . . . . . 53
Lenovo programs . . . . . . . . . . . . . 15 Finding ThinkPad options . . . . . . . . . . 53
Accessing Lenovo programs on the Windows 7 ThinkPad OneLink Dock . . . . . . . . . . . 53
operating system. . . . . . . . . . . . . . 16
ThinkPad OneLink Pro Dock . . . . . . . . . 54
Accessing Lenovo programs on the Windows 8.1
operating system. . . . . . . . . . . . . . 17
Chapter 4. Security . . . . . . . . . . 57
An introduction to Lenovo programs . . . . . . 17
Using passwords. . . . . . . . . . . . . . 57
Chapter 2. Using your computer . . . 21 Typing passwords . . . . . . . . . . . 57
Registering your computer . . . . . . . . . . 21 Power-on password . . . . . . . . . . . 57
Frequently asked questions . . . . . . . . . 21 Supervisor password . . . . . . . . . . 58
Using the special buttons . . . . . . . . . . 23 Hard disk passwords . . . . . . . . . . 59
Using the multi-touch screen . . . . . . . . . 23 Hard disk security . . . . . . . . . . . . . 61
Operating modes. . . . . . . . . . . . . . 26 Setting the security chip . . . . . . . . . . . 62
Enabling the operating modes . . . . . . . 26 Notice on deleting data from your storage drive. . 63
Rotating the computer display. . . . . . . 27 Using firewalls . . . . . . . . . . . . . . . 64
Notebook mode . . . . . . . . . . . . 27 Protecting data against viruses . . . . . . . . 64
Stand mode . . . . . . . . . . . . . . 28
Chapter 5. Advanced configuration . . 65
Tablet mode . . . . . . . . . . . . . . 29
Installing a new operating system . . . . . . . 65
Tent mode . . . . . . . . . . . . . . 31
Installing the Windows 7 operating system . . 65
Using the keyboard . . . . . . . . . . . . . 32
Installing the Windows 8.1 operating system . 66
Special keys . . . . . . . . . . . . . . . 34
Installing device drivers . . . . . . . . . . . 67
ThinkPad pointing device . . . . . . . . . . 36
Using the ThinkPad Setup program . . . . . . 67
TrackPoint pointing device . . . . . . . . 37
Main menu . . . . . . . . . . . . . . 68
Trackpad . . . . . . . . . . . . . . . 38
Config menu. . . . . . . . . . . . . . 68
© Copyright Lenovo 2014 i

Date and Time menu . . . . . . . . . . 72 Recovering your operating system if Windows
Security menu . . . . . . . . . . . . . 72 8.1 fails to start. . . . . . . . . . . . . 109
Startup menu . . . . . . . . . . . . . 77 Creating and using recovery media . . . . . 109
Restart menu . . . . . . . . . . . . . 78
Chapter 9. Replacing devices . . . . 111
Updating the UEFI BIOS . . . . . . . . . 79
Static electricity prevention . . . . . . . . . . 111
Using system management. . . . . . . . . . 79
Disabling the built-in battery . . . . . . . . . 111
Chapter 6. Preventing problems . . . 81 Installing or replacing the SIM card. . . . . . . 112
General tips for preventing problems . . . . . . 81 Replacing the keyboard . . . . . . . . . . . 113
Making sure device drivers are current . . . . . 82 Replacing the base cover assembly . . . . . . 117
Taking care of your computer . . . . . . . . . 83 Replacing the memory module . . . . . . . . 119
Cleaning the cover of your computer . . . . 84 Replacing the internal storage drive . . . . . . 121
Replacing the wireless WAN card . . . . . . . 123
Chapter 7. Troubleshooting computer Replacing the coin-cell battery . . . . . . . . 125
problems . . . . . . . . . . . . . . . 87
Diagnosing problems . . . . . . . . . . . . 87 Chapter 10. Getting support . . . . 127
Troubleshooting . . . . . . . . . . . . . . 87 Before you contact Lenovo . . . . . . . . . . 127
Computer stops responding . . . . . . . 87 Getting help and service . . . . . . . . . . . 127
Spills on the keyboard . . . . . . . . . . 88 Using diagnostic programs . . . . . . . . 128
Error messages . . . . . . . . . . . . 88 Lenovo Support Web site. . . . . . . . . 128
Errors without messages . . . . . . . . . 90 Calling Lenovo . . . . . . . . . . . . . 128
Beep errors . . . . . . . . . . . . . . 91 Purchasing additional services . . . . . . . . 129
Memory module problems . . . . . . . . 91
Chapter 11. You and your
Networking problems . . . . . . . . . . 92
computer . . . . . . . . . . . . . . 131
Problems with the keyboard and other pointing
devices . . . . . . . . . . . . . . . . 93 Accessibility and comfort . . . . . . . . . . 131
Problems with the display and multimedia Ergonomic information. . . . . . . . . . 131
devices . . . . . . . . . . . . . . . . 94 Comfort . . . . . . . . . . . . . . . 132
Battery and power problems . . . . . . . 98 Accessibility information . . . . . . . . . 132
Problems with drives and other storage Traveling with your computer . . . . . . . . . 136
devices . . . . . . . . . . . . . . . . 101 Travel tips . . . . . . . . . . . . . . . 136
A software problem . . . . . . . . . . . 101 Travel accessories . . . . . . . . . . . 137
Problems with ports and connectors . . . . 102
Appendix A. Regulatory
Chapter 8. Recovery overview . . . 103 information . . . . . . . . . . . . . 139
Recovery overview for the Windows 7 operating Wireless related information . . . . . . . . . 139
system . . . . . . . . . . . . . . . . . . 103
Location of the UltraConnect wireless
Creating and using a recovery media . . . . 103 antennas . . . . . . . . . . . . . . . 140
Performing backup and recovery Locating wireless regulatory notices . . . . 141
operations . . . . . . . . . . . . . . 104
Certification related information . . . . . . . . 141
Using the Rescue and Recovery
workspace . . . . . . . . . . . . . . 105 Export classification notice . . . . . . . . . . 141
Creating and using a rescue medium . . . . 106 Electronic emission notices. . . . . . . . . . 142
Reinstalling preinstalled applications and Federal Communications Commission
device drivers . . . . . . . . . . . . . 107 Declaration of Conformity . . . . . . . . 142
Solving recovery problems . . . . . . . . 108 Industry Canada Class B emission compliance
statement . . . . . . . . . . . . . . . 142
Recovery overview for the Windows 8.1 operating
system . . . . . . . . . . . . . . . . . . 108 European Union - Compliance to the
Electromagnetic Compatibility Directive . . . 142
Refreshing your computer . . . . . . . . 108
German Class B compliance statement . . . 143
Resetting your computer to the factory default
settings. . . . . . . . . . . . . . . . 109 Class 1 laser compliance statement . . . . 143
Using the advanced startup options . . . . 109 Korea Class B compliance statement . . . . 144
Japan VCCI Class B compliance statement . . 144
ii User Guide
Japan compliance statement for products Battery recycling information for the United States
which connect to the power mains with and Canada . . . . . . . . . . . . . . . . 147
rated current less than or equal to 20 A per Recycling information for China . . . . . . . . 147
phase . . . . . . . . . . . . . . . . 144
Lenovo product service information for Appendix C. Restriction of Hazardous
Taiwan . . . . . . . . . . . . . . . . 144
Substances Directive (RoHS) . . . . 149
Eurasian compliance mark . . . . . . . . 144
European Union RoHS . . . . . . . . . . . 149
Brazil regulatory notice. . . . . . . . . . 144
China RoHS. . . . . . . . . . . . . . . . 150
Mexico regulatory notice . . . . . . . . . 144
Turkish RoHS . . . . . . . . . . . . . . . 151
Appendix B. WEEE and recycling Ukraine RoHS . . . . . . . . . . . . . . . 151
statements . . . . . . . . . . . . . 145 India RoHS . . . . . . . . . . . . . . . . 151
Important WEEE information . . . . . . . . . 145
Appendix D. ENERGY STAR model
Japan recycling statements . . . . . . . . . 145
information . . . . . . . . . . . . . 153
Recycling information for Brazil . . . . . . . . 146
Battery recycling information for the European Appendix E. Notices . . . . . . . . . 155
Union . . . . . . . . . . . . . . . . . . 146
Trademarks . . . . . . . . . . . . . . . . 156
Battery recycling information for Taiwan . . . . . 147
© Copyright Lenovo 2014 iii

iv User Guide
Read this first
Be sure to follow the important tips given here to get the most use and enjoyment out of your computer.
Failure to do so might lead to discomfort or injury, or cause your computer to fail.
Protect yourself from the heat that your computer generates.

When your computer is turned on or the battery is charging, the base, the palm
rest, and some other parts may become hot. The temperature they reach
depends on the amount of system activity and the level of charge in the battery.
Extended contact with your body, even through clothing, could cause
discomfort or even a skin burn.
• Avoid keeping your hands, your lap, or any other part of your body in
contact with a hot section of the computer for any extended time.
• Periodically take hands from using the keyboard by lifting your hands from
the palm rest.
Protect yourself from the heat generated by the ac power adapter.

When the ac power adapter is connected to an electrical outlet and your
computer, it generates heat.
Extended contact with your body, even through clothing, may cause a skin
burn.
• Do not place the ac power adapter in contact with any part of your body
while it is in use.
• Never use it to warm your body.
Prevent your computer from getting wet.
To avoid spills and the danger of electrical shock, keep liquids away from your
computer.
Protect the cables from being damaged.
Applying strong force to cables may damage or break them.
Route communication lines, or the cables of an ac power adapter, a mouse, a

keyboard, a printer, or any other electronic device, so that they cannot be walked
on, tripped over, pinched by your computer or other objects, or in any way
subjected to treatment that could interfere with the operation of your computer.
© Copyright Lenovo 2014 v

Protect your computer and data when moving it.
Before moving a computer equipped with an internal storage drive, do one
of the following:
• Turn it off.
• Put it in sleep mode.
• Put it in hibernation mode.
This will help to prevent damage to the computer, and possible loss of data.
Handle your computer gently.
Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on
your computer, display, or external devices.
Carry your computer carefully.
• Use a quality carrying case that provides adequate cushioning and protection.
• Do not pack your computer in a tightly packed suitcase or bag.
• Before putting your computer in a carrying case, ensure that it is off, in sleep
mode, or in hibernation mode. Do not put a computer in a carrying case while it
is turned on.
• Do not carry your computer in the notebook mode, stand mode, tablet mode, or
tent mode. Carry your computer with the display closed only.
Important safety information

Note: Read the important safety information first.
This information can help you safely use your notebook computer. Follow and retain all information included
with your computer. The information in this document does not alter the terms of your purchase agreement
or the Lenovo® Limited Warranty. For more information, see “Warranty Information” in the Safety, Warranty,
and Setup Guide that comes with your computer.
Customer safety is important. Our products are developed to be safe and effective. However, personal
computers are electronic devices. Power cords, power adapters, and other features can create potential
safety risks that can result in physical injury or property damage, especially if misused. To reduce these
risks, follow the instructions included with your product, observe all warnings on the product and in the
operating instructions, and review the information included in this document carefully. By carefully following
the information contained in this document and provided with your product, you can help protect yourself
from hazards and create a safer computer work environment.
Note: This information includes references to power adapters and batteries. In addition to notebook
computers, some products (such as speakers and monitors) ship with external power adapters. If you have
such a product, this information applies to your product. In addition, computer products contain a coin-sized
internal battery that provides power to the system clock even when the computer is unplugged, so the
battery safety information applies to all computer products.
vi User Guide
Conditions that require immediate action
Products can become damaged due to misuse or neglect. Some product damage is serious enough
that the product should not be used again until it has been inspected and, if necessary, repaired by
an authorized servicer.
As with any electronic device, pay close attention to the product when it is turned on. On very rare
occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you
might hear sounds like popping, cracking or hissing. These conditions might merely mean that an
internal electronic component has failed in a safe and controlled manner. Or, they might indicate
a potential safety issue. However, do not take risks or attempt to diagnose the situation yourself.
Contact the Customer Support Center for further guidance. For a list of Service and Support phone
numbers, see the following Web site:
http://www.lenovo.com/support/phone
Frequently inspect your computer and its components for damage or wear or signs of danger.
If you have any question about the condition of a component, do not use the product. Contact
the Customer Support Center or the product manufacturer for instructions on how to inspect the
product and have it repaired, if necessary.
In the unlikely event that you notice any of the following conditions, or if you have any safety
concerns with your product, stop using the product and unplug it from the power source and
telecommunication lines until you can speak to the Customer Support Center for further guidance.
• Power cords, plugs, power adapters, extension cords, surge protectors, or power supplies that are
cracked, broken, or damaged.
• Signs of overheating, smoke, sparks, or fire.
• Damage to a battery (such as cracks, dents, or creases), discharge from a battery, or a buildup of foreign
substances on the battery.
• A cracking, hissing or popping sound, or strong odor that comes from the product.
• Signs that liquid has been spilled or an object has fallen onto the computer product, the power cord or
power adapter.
• The computer product, power cord, or power adapter has been exposed to water.
• The product has been dropped or damaged in any way.
• The product does not operate normally when you follow the operating instructions.
Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured for
or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions,
or until you get a suitable replacement.
Safety guidelines
Always observe the following precautions to reduce the risk of injury and property damage.
Service and upgrades

Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center or
your documentation. Only use a Service Provider who is approved to repair your particular product.
Note: Some computer parts can be upgraded or replaced by the customer. Upgrades typically are
referred to as options. Replacement parts approved for customer installation are referred to as Customer
Replaceable Units, or CRUs. Lenovo provides documentation with instructions when it is appropriate for
customers to install options or replace CRUs. You must closely follow all instructions when installing or
replacing parts. The Off state of a power indicator does not necessarily mean that voltage levels inside a
product are zero. Before you remove the covers from a product equipped with a power cord, always ensure
© Copyright Lenovo 2014 vii

that the power is turned off and that the product is unplugged from any power source. If you have any
questions or concerns, contact the Customer Support Center.
Although there are no moving parts in your computer after the power cord has been disconnected, the
following warnings are required for your safety.
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Before replacing any CRUs, turn off the computer and wait three to five minutes to let the computer
cool before opening the cover.
Power cords and power adapters
DANGER
Use only the power cords and power adapters supplied by the product manufacturer.
The power cords shall be safety approved. For Germany, it shall be H05VV-F, 3G, 0.75 mm2, or
better. For other countries, the suitable types shall be used accordingly.
Never wrap a power cord around a power adapter or other object. Doing so can stress the cord in
ways that can cause the cord to fray, crack, or crimp. This can present a safety hazard.
Always route power cords so that they will not be walked on, tripped over, or pinched by objects.
Protect power cords and power adapters from liquids. For instance, do not leave your power cord
or power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers.
Liquids can cause a short circuit, particularly if the power cord or power adapter has been stressed
by misuse. Liquids also can cause gradual corrosion of power cord terminals and/or the connector
terminals on a power adapter, which can eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure that all power cord
connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins or shows signs of
overheating (such as deformed plastic) at the ac input pins or anywhere on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs of corrosion or
overheating or where the power cord appears to have been damaged in any way.
viii User Guide

To prevent possible overheating, do not cover the power adapter with clothing or other objects
when the power adapter is plugged into an electrical outlet.
Extension cords and related devices

Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use
are rated to handle the electrical requirements of the product. Never overload these devices. If power strips
are used, the load should not exceed the power strip input rating. Consult an electrician for more information
if you have questions about power loads, power requirements, and input ratings.
Plugs and outlets
DANGER
If a receptacle (power outlet) that you intend to use with your computer equipment appears to be
damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain
a replacement.
Do not share an electrical outlet with other home or commercial appliances that draw large amounts
of electricity; otherwise, unstable voltage might damage your computer, data, or attached devices.
Some products are equipped with a three-pronged plug. This plug fits only into a grounded
electrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into
a non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for an
approved outlet adapter or to replace the outlet with one that enables this safety feature. Never
overload an electrical outlet. The overall system load should not exceed 80 percent of the branch
circuit rating. Consult an electrician for more information if you have questions about power loads
and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible, and located close
to the equipment. Do not fully extend power cords in a way that will stress the cords.
Be sure that the power outlet provides the correct voltage and current for the product you are
installing.
Carefully connect and disconnect the equipment from the electrical outlet.
Power supply statement
DANGER
Never remove the cover on a power supply or any part that has the following label attached.
© Copyright Lenovo 2014 ix

Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with
one of these parts, contact a service technician.
External devices
CAUTION:
Do not connect or disconnect any external device cables other than USB cable while the computer
power is on; otherwise, you might damage your computer. To avoid possible damage to attached
devices, wait at least five seconds after the computer is shut down to disconnect external devices.
General battery notice
DANGER
Batteries supplied by Lenovo for use with your product have been tested for compatibility and
should only be replaced with approved parts. A battery other than the one specified by Lenovo, or a
disassembled or modified battery is not covered by the warranty.
Battery abuse or mishandling can cause overheat, liquid leakage, or an explosion. To avoid possible
injury, do the following:
• Do not open, dissemble, or service any battery.
• Do not crush or puncture the battery.
• Do not short-circuit the battery, or expose it to water or other liquids.
• Keep the battery away from children and fire.
Stop using the battery if it is damaged, or if you notice any discharge or the buildup of foreign
materials on the battery leads.
Store the rechargeable batteries or products containing the rechargeable batteries at room
temperature, charged to approximately 30 to 50% of capacity. We recommend that the batteries be
charged about once per year to prevent overdischarge.
Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply
with local ordinances or regulations.
Notice for built-in rechargeable battery
DANGER
Do not attempt to replace the built-in rechargeable battery. Replacement of the battery must be
done by a Lenovo-authorized repair facility or technician.
Only recharge the battery strictly according to instructions included in the product documentation.
The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local
laws and regulations.
x User Guide
Notice for non-rechargeable coin-cell battery
DANGER
Do not attempt to replace the non-rechargeable coin-cell battery. Replacement of the battery must
be done by a Lenovo-authorized repair facility or a Lenovo-authorized technician.
The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local
laws and regulations.
The following statement applies to users in the state of California, U.S.A.
California Perchlorate Information:
Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate.
Perchlorate Material - special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate
Heat and product ventilation
DANGER
Computers, ac power adapters, and many accessories can generate heat when turned on and when
batteries are charging. Notebook computers can generate a significant amount of heat due to their
compact size. Always follow these basic precautions:
• When your computer is turned on or the battery is charging, the base, the palm rest, and some
other parts may become hot. Avoid keeping your hands, your lap, or any other part of your
body in contact with a hot section of the computer for any extended length of time. When you
use the keyboard, avoid keeping your palms on the palm rest for a prolonged period of time.
Your computer generates some heat during normal operation. The amount of heat depends on
the amount of system activity and the battery charge level. Extended contact with your body,
even through clothing, could cause discomfort or even a skin burn. Periodically take breaks
from using the keyboard by lifting your hands from the palm rest; and be careful not to use
the keyboard for any extended length of time.
• Do not operate your computer or charge the battery near flammable materials or in explosive
environments.
• Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and
reliable operation. These features might inadvertently become blocked by placing the product on
a bed, sofa, carpet, or other flexible surface. Never block, cover, or disable these features.
• When the ac power adapter is connected to an electrical outlet and your computer, it generates
heat. Do not place the adapter in contact with any part of your body while using it. Never use the
ac power adapter to warm your body. Extended contact with your body, even through clothing,
may cause a skin burn.
For your safety, always follow these basic precautions with your computer:
• Keep the cover closed whenever the computer is plugged in.
• Regularly inspect the outside of the computer for dust accumulation.
• Remove dust from vents and any perforations in the bezel. More frequent cleanings might be
required for computers in dusty or high-traffic areas.
• Do not restrict or block any ventilation openings.
© Copyright Lenovo 2014 xi

• Do not operate your computer inside furniture, as this might increase the risk of overheating.
• Airflow temperatures into the computer should not exceed 35°C (95°F).
Electrical current safety information
DANGER
Electric current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:

• Do not use your computer during a lightning storm.
• Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
• Connect all power cords to a properly wired and grounded electrical outlet.
• Connect to properly wired outlets any equipment that will be attached to this product.
• Whenever possible, use one hand only to connect or disconnect signal cables.
• Never turn on any equipment when there is evidence of fire, water, or structural damage.
• Disconnect all attached cables and disable batteries before opening any accessible device
covers unless instructed otherwise in the installation and configuration procedures.
• Do not use your computer until all internal parts enclosures are fastened into place. Never use
the computer when internal parts and circuits are exposed.
DANGER
Connect and disconnect cables as described in the following procedures when installing, moving,
or opening covers on this product or attached devices.
To connect: To disconnect:
1. Turn everything OFF. 1. Turn everything OFF.
2. First, attach all cables to devices. 2. First, remove power cords from outlets.
3. Attach signal cables to connectors. 3. Remove signal cables from connectors.
4. Attach power cords to outlets. 4. Remove all cables from devices.
5. Turn devices ON.
The power cord must be disconnected from the wall outlet or receptacle before installing all other
electrical cables connected to the computer.
The power cord may be reconnected to the wall outlet or receptacle only after all other electrical
cables have been connected to the computer.
DANGER
During electrical storms, do not perform any replacement and do not connect the telephone cable
to or disconnect it from the telephone outlet on the wall.
xii User Guide

Laser safety information
CAUTION:
When laser products (such as CD-ROM drives, DVD drives, 3D cameras, fiber optic devices, or
transmitters) are installed, note the following:
• Do not remove the covers. Removing the covers of the laser product could result in exposure to
hazardous laser radiation. There are no serviceable parts inside the device.
• Use of controls or adjustments or performance of procedures other than those specified herein
might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following:
Laser radiation when open. Do not stare into the beam, do not view directly with optical
instruments, and avoid direct exposure to the beam.
DANGER
Notices for 3D camera:

• Do not attempt to open any portion of the 3D camera.
• There are no user serviceable parts with the 3D camera.
• Modification or service of the 3D camera, specifically the infrared laser projector might cause
the emissions to exceed Class 1.
Liquid crystal display (LCD) notice

CAUTION:
The liquid crystal display (LCD) is made of glass, and rough handling or dropping the computer can
cause the LCD to break. If the LCD breaks and the internal fluid gets into your eyes or on your
hands, immediately wash the affected areas with water for at least 15 minutes; if any symptoms are
present after washing, get medical care.
Using headphones or earphones

CAUTION:
Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of
the equalizer to maximum increases the earphone and headphone output voltage and the sound
pressure level. Therefore, to protect your hearing, adjust the equalizer to an appropriate level.
Excessive use of headphones or earphones for a long period of time at high volume can be dangerous if the
output of the headphone or earphone connectors do not comply with specifications of EN 50332-2. The
headphone output connector of your computer complies with EN 50332-2 Sub clause 7. This specification
limits the computer’s maximum wide band true RMS output voltage to 150 mV. To help protect against
hearing loss, ensure that the headphones or earphones you use also comply with EN 50332-2 (Clause 7
limits) for a wide band characteristic voltage of 75 mV. Using headphones that do not comply with EN
50332-2 can be dangerous due to excessive sound pressure levels.
If your Lenovo computer came with headphones or earphones in the package, as a set, the combination of
the headphones or earphones and the computer already complies with the specifications of EN 50332-1.
If different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5
© Copyright Lenovo 2014 xiii

Limitation Values). Using headphones that do not comply with EN 50332-1 can be dangerous due to
excessive sound pressure levels.
Additional safety information
Plastic bag notice
DANGER
Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger
of suffocation.
Polyvinyl Chloride (PVC) cable and cord notice

Many personal computer products and accessories contain cords, cables or wires, such as power cords or
cords to connect the accessory to a personal computer. If this product has such a cord, cable or wire, then
the following warning applies:
WARNING: Handling the cord on this product or cords associated with accessories sold with this product
will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or
other reproductive harm. Wash hands after handling.
xiv User Guide

Chapter 1. Product overview
This chapter provides information about the locations of connectors, locations of important product labels,
computer features, specifications, operating environment, and preinstalled programs.
This chapter contains the following topics:

• “Locating computer controls, connectors, and indicators” on page 1
• “Locating important product information” on page 10
• “Features” on page 13
• “Specifications” on page 14
• “Operating environment” on page 15
• “Lenovo programs” on page 15
Locating computer controls, connectors, and indicators

This section introduces the computer hardware features to give you the basic information you will need
to start using the computer.
Front view for models with a 2D camera
Figure 1. Front view for models with a 2D camera
1 Ambient light sensor (available on Windows 8.1 based 2 Microphones

computer models)
3 2D camera 4 Numeric keypad
5 System-status indicator 6 TrackPoint pointing stick
© Copyright Lenovo 2014 1

7 Trackpad 8 TrackPoint buttons
9 Speakers 10 Windows Start-screen control
11 Multi-touch screen
1 Ambient light sensor

The ambient light sensor detects the surrounding light conditions. Then the computer adjusts the screen
brightness accordingly.
2 Microphones
The microphones capture sound and voice when used with a program capable of handling audio.
3 2D camera
Some models come with a 2D camera. Use the camera to take pictures or hold a video conference. For
more information, see “Using the camera” on page 50.
4 Numeric keypad
Your computer has a numeric keypad that can be used to input numbers quickly.
5 System-status indicator (illuminated ThinkPad logo)

The illuminated dot in the ThinkPad logo functions as a system-status indicator. For more information, see
“Status indicators” on page 9.
ThinkPad pointing device

6 TrackPoint® pointing stick
7 Trackpad
8 TrackPoint buttons
The keyboard contains the Lenovo unique ThinkPad pointing device. Pointing, selecting, and dragging are all
part of a single process that you can perform without moving your fingers from a typing position. For more
information, see “ThinkPad pointing device” on page 36.
9 Speakers
Your computer is equipped with a pair of stereo speakers.
10 Windows Start-screen control

Tap the Windows® Start-screen control to switch between the current workspace and the Start screen; or
tap the Windows Start-screen control to wake up the computer from sleep mode.
Your computer comes with a multi-touch screen. For more information, see “Using the multi-touch screen”
on page 23.
2 User Guide
Front view for models with a 3D camera
Figure 2. Front view for models with a 3D camera
1 Microphones 2 Ambient light sensor (available on Windows 8.1 based

computer models)
3 3D camera 4 Infrared camera
5 Color camera 6 Infrared laser projector
7 Numeric keypad 8 System-status indicator
9 TrackPoint pointing stick 10 Trackpad
11 TrackPoint buttons 12 Speakers
13 Windows Start-screen control 14 Multi-touch screen
1 Microphones
The microphones capture sound and voice when used with a program capable of handling audio.
2 Ambient light sensor

The ambient light sensor detects the surrounding light conditions. Then the computer adjusts the screen
brightness accordingly.
3 3D camera
4 Infrared camera
5 Color camera
6 Infrared laser projector
Some models come with a 3D camera 3 . Consisted of an infrared camera 4 , a color camera 5 , and an
infrared laser projector 6 , the 3D camera enables you to interact with your computer easily and conveniently.
The 3D camera supports all functions of a 2D camera. Use the 3D camera to take pictures or hold a video
conference. For more information, see “Using the camera” on page 50.
Chapter 1. Product overview 3

7 Numeric keypad
Your computer has a numeric keypad that can be used to input numbers quickly.
8 System-status indicator (illuminated ThinkPad logo)

The illuminated dot in the ThinkPad logo functions as a system-status indicator. For more information, see
“Status indicators” on page 9.

9 TrackPoint pointing stick
10 Trackpad
11 TrackPoint buttons
The keyboard contains the Lenovo unique ThinkPad pointing device. Pointing, selecting, and dragging are all
part of a single process that you can perform without moving your fingers from a typing position. For more
information, see “ThinkPad pointing device” on page 36.
12 Speakers
Your computer is equipped with a pair of stereo speakers.
13 Windows Start-screen control

Tap the Windows Start-screen control to switch between the current workspace and the Start screen; or tap
the Windows Start-screen control to wake up the computer from sleep mode.
Your computer comes with a multi-touch screen. For more information, see “Using the multi-touch screen”
on page 23.
Right-side view
Note: Your computer might look slightly different from the illustrations in this topic.
Figure 3. Right-side view
4 User Guide
1 Power button 2 Volume-control buttons
3 Screen-rotation-lock button 4 USB 2.0 connector
5 USB 3.0 connector 6 High-Definition Multimedia Interface (HDMI™)

connector
1 Power button
Press the power button to turn on the computer or put the computer into sleep mode. For information about
how to turn off the computer, see “Frequently asked questions” on page 21.
If your computer is completely unresponsive, you can turn off the computer by pressing and holding the
power button for four or more seconds. If the computer cannot be turned off, see “Computer stops
responding” on page 87 for more information.
You also can define what the power button does. For example, by pressing the power button, you can turn
off the computer or put the computer into sleep or hibernation mode. To change what the power button
does, do the following:
1. From the desktop, click the battery-status icon in the Windows notification area on the taskbar.
2. Click More power options ➙ Choose what the power buttons do.
3. Follow the instructions on the screen.
Note: Use Lenovo programs for advanced power settings.

• For Windows 7: Use the Power Manager program.
• For Windows 8.1: Use the Lenovo Settings program.
For more information, see “Lenovo programs” on page 15.
2 Volume-control buttons
The volume-control buttons enable you to adjust the volume while you are using your computer in the
tablet mode.
3 Screen-rotation-lock button
Use the screen-rotation-lock button to lock the screen-rotation function.
4 USB 2.0 connector

The Universal Serial Bus (USB) 2.0 connector is used for connecting USB-compatible devices, such as a
printer or digital camera.
Attention: When you attach a USB cable to this connector, ensure that the USB mark is facing upward.
Otherwise the connector might get damaged.
5 USB 3.0 connector

The USB 3.0 connector is used for connecting USB-compatible devices, such as a USB keyboard or a
USB mouse.
Attention: When you attach a USB cable to this connector, ensure that the USB mark is facing upward.
6 HDMI connector
Use the High-Definition Multimedia Interface (HDMI) connector to connect the computer to an
HDMI-compatible audio device or video monitor, such as a high-definition television (HDTV).

Note: If you connect the computer to a supported ThinkPad OneLink Dock, use the HDMI connector on
the dock, not the one on the computer.
Left-side view
Figure 4. Left-side view
1 Security-lock slot 2 ac power connector
3 Lenovo OneLink connector 4 Always On USB connector (USB 3.0 connector)
5 SIM card slot 6 Audio connector
7 Media-card slot
1 Security-lock slot
To protect your computer from theft, purchase a security cable lock, usually a Kensington-style cable lock,
that fits this security-lock slot to lock your computer to a stationary object.
Note: You are responsible for evaluating, selecting, and implementing the locking device and security
feature. Lenovo makes no comments, judgments, or warranties about the function, quality, or performance
of the locking device and security feature.
2 ac power connector
3 Lenovo OneLink connector
When the ac power adapter is connected to the ac power connector, the ac power adapter provides ac
power to the computer and charges the battery. When a supported ThinkPad OneLink Dock option is
connected to the Lenovo OneLink connector, the option can not only extend the computer capabilities but
also provide ac power to the computer and charge the battery.
To use the Lenovo OneLink connector, remove the connector cover from the Lenovo OneLink connector first.
6 User Guide
4 Always On USB connector (USB 3.0 connector)
By default, the Always On USB connector enables you to charge some mobile digital devices and
smartphones when your computer is in the following situations:
• When your computer is on or in sleep mode
• When your computer is in hibernation mode or is turned off, but connected to ac power
If you want to charge these devices when your computer is in hibernation mode or is turned off, and the
computer is not connected to ac power, do the following:
• For Windows 7: Start the Power Manager program and click the Global Power Settings tab. Then select
Enable USB charge from the computer battery even when the computer is off, and click OK or Apply.
• For Windows 8.1: Press the Windows key to go to the Start screen. Click Lenovo Settings ➙ Power.
Then select Enable USB charge from the computer battery even when the computer is off check
box under Always On USB.
Attention: When you attach a USB cable to the connector, ensure that the USB mark is facing upward.
5 SIM card slot (available on some models)

Your computer might have a Subscriber Identification Module (SIM) card slot. Depending on the model,
a SIM card might be installed in your computer.
6 Audio connector
Connect headphones or a headset that has a 3.5 mm (0.14-inch) 4-pole plug to the audio connector to
listen to the sound from the computer.
Notes:
• If you are using a headset with a function switch, do not press this switch while using the headset. If
you press it, the headset microphone will be disabled, and the integrated microphones on the computer
will be enabled instead.
• The audio connector does not support a conventional microphone. For more information, see “Using
audio features” on page 49.
7 Media-card slot
Your computer is equipped with a media card reader, which provides a media-card slot. Insert your flash
media card into the media-card slot to read the data on the card. For more information about the supported
cards, see “Using a flash media card” on page 51.

Bottom view
Figure 5. Bottom view
1 Emergency-reset hole
1 Emergency-reset hole
If the computer stops responding and you cannot turn it off by pressing the power button, remove the ac
power adapter and insert a needle or a straightened paper clip into the emergency-reset hole to reset the
computer.
Rear view
Figure 6. Rear view
1 Fan louvers
1 Fan louvers
The fan louvers and internal fan enable air to circulate in the computer and to ensure proper cooling,
especially the cooling of the microprocessor.
Notes:
• To ensure proper airflow, do not place any obstacles in front of the fan louvers.
• The fan louvers of your computer might get too hot when the computer is running heavy tasks. When you
are using or carrying the computer, take care to avoid direct contact to the fan louvers.
8 User Guide
Status indicators
Your computer has several status indicators that show the status of your computer.
1 Fn Lock indicator
The Fn Lock indicator shows the status of the Fn Lock function. For more information, see “Special keys”
on page 34.
2 Speaker-mute indicator
When the speaker-mute indicator is on, the speakers are muted.
3 Microphone-mute indicator
When the microphone-mute indicator is on, the microphones are muted.
4 Camera-status indicator
When the camera-status indicator is on, the camera is in use.

5 6 System-status indicators
There are two ThinkPad logos on your computer, one on the palm rest and the other on the outer lid.
The illuminated dot in each ThinkPad logo works as a system-status indicator and helps you identify the
status of your computer.
• Blink for three times: The computer is initially connected to power.
• Blink fast: The computer is entering hibernation mode.
• Blink slowly: The computer is in sleep mode.
• Off: The computer is off or in hibernation mode.
• On: The computer is on (in normal use).
Locating important product information

This section provides information to help you locate the machine type and model label, FCC ID and IC
Certification information, the Windows Certificate of Authenticity label, and the Genuine Microsoft label.
Machine type and model label

The machine type and model label identifies your computer. When you contact Lenovo for help, the machine
type and model information helps support technicians to identify your computer and provide faster service.
The following illustration shows the location of the machine type and model of your computer.
FCC ID and IC Certification information

The FCC and IC Certification information is identified by a label located on the computer base cover as
shown in the following illustration.
10 User Guide
The content of this label differs depending on the wireless modules that come with your computer:
• For a preinstalled wireless module, this label identifies the actual FCC ID and IC certification number for
the wireless module installed by Lenovo.
Note: Do not remove or replace a preinstalled wireless module by yourself. For module replacement, you
must contact Lenovo service first. Lenovo is not responsible for any damage caused by unauthorized
replacement.
• For a user-replaceable wireless WAN module, this label directs you to consult this user guide for the actual
FCC ID and IC certification number.
The FCC ID and IC Certification number label for the user-replaceable wireless WAN module is affixed to
the wireless module 1 (available on some models) installed in your computer.
Note: For the user-replaceable wireless module, ensure that you use only Lenovo-authorized wireless
modules for the computer. Otherwise, an error message will be displayed and the computer will beep
when you turn on the computer.

Certificate of Authenticity label
The Certificate of Authenticity label is provided on models that are licensed to use a Windows 7 operating
system. The licensed Windows version and product key associated with the computer are printed on
this label. Record this information and keep it in a safe place. You might need these numbers to start
your computer or reinstall the Windows 7 operating system. Depending on the model, the Certificate of
Authenticity label can be on the computer cover, under the battery, or on the power adapter.
For more information about the Certificate of Authenticity label, go to:

http://www.microsoft.com/en-us/howtotell/Hardware.aspx
The following illustration shows the location of the Certificate of Authenticity label.
Genuine Microsoft label

The Genuine Microsoft label is provided on the following:
• Some computer models, based on geographic location, that are licensed to use the Windows 8.1
operating system
• All computer models that are licensed to use the Windows 8.1 Pro operating system
The version of the operating system is printed on the label. Lenovo computers that are licensed for use with
the Windows 8.1 operating system are shipped with the Windows 8.1 license key digitally encoded into the
computer hardware. If your computer model is licensed to use the Windows 8.1 Pro operating system, that
license contains downgrade rights which permit you to use the Windows 7 Professional operating system in
place of the Windows 8.1 Pro operating system if you prefer.
For more information about the Genuine Microsoft label, go to:

http://www.microsoft.com/en-us/howtotell/Hardware.aspx
12 User Guide
Depending on the computer model, the Genuine Microsoft label might be located on the computer cover,
under the battery, or on the power adapter. The following illustration shows the location of the Genuine
Microsoft label.
Features
This topic provides information about the computer features.
Notebook computer color
Black or silver
Processor
To view the microprocessor information of your computer, do the following:
• For Windows 7: Click Start, right-click Computer. Then click Properties.

• For Windows 8.1: Move the pointer to the top-right or bottom-right corner of the screen to bring up the
charms. Then click Settings ➙ PC info.
Memory
DDR3L (Double Data Rate 3 Low Voltage) RAM (Random Access Memories)
Storage device
Depending on the model:
• 2.5-inch form factor, 7-mm height hard disk drive
• 2.5-inch form factor, 7-mm height solid-state drive
• 2.5-inch form factor, 7-mm height hybrid drive
• M.2 solid-state drive for cache only
Display
• Display size: 396.2 mm (15.6 inches)
• Display resolution:
– LCD: 1920-by-1080
– External monitor: up to 1920-by-1200, depending on the monitor model
• Color display with the thin-film transistor (TFT) technology
• Brightness control

• Multi-touch screen
Keyboard
• Function keys
• Keyboard frame travel function
• 6-row, backlight, and spill-resistant
• ThinkPad pointing device
• Numeric keypad
Interface
• ac power connector
• Audio connector
• 4-in-1 media-card slot
• HDMI connector
• Lenovo OneLink connector
• Microphones
• One USB 2.0 connector
• Screen-rotation-lock button
• SIM card slot
• Two USB 3.0 connectors
• 2D camera or 3D camera, depending on the model
Note: The 3D camera is an infrared laser device.

• Volume-control buttons
• Windows Start-screen control
Wireless features
• Integrated wireless LAN
• Integrated wireless WAN (available on some models)
• Integrated Bluetooth
Security feature
• Trusted Platform Module (TPM) (available on some models)
Specifications
This section lists the physical specifications for your computer.
Size
• Width: 383 mm (15.08 inches)
• Depth: 256.5 mm (10.1 inches)
• Height:
For notebook mode: 21.8 mm (0.86 inches) to 22.3 mm (0.88 inches)
For tablet mode: 24.2 mm (0.95 inches) to 27.45 mm (1.08 inches)
14 User Guide
Heat output
• 45 W (154 Btu/hr) maximum
• 65 W (222 Btu/hr) maximum
Power source (ac power adapter)

• Sine-wave input at 50-60 Hz
• Input rating of the ac power adapter: 100-240 V ac, 50-60 Hz
Operating environment
This section provides information about your computer operating environment.
Environment:
• Maximum altitude without pressurization: 3048 m (10 000 ft)
• Temperature
– At altitudes up to 2438 m (8000 ft)
– Operating: 5.0°C (41°F) to 35.0°C (95°F)
– Storage: 5.0°C (41°F) to 43.0°C (109°F)
– At altitudes above 2438 m (8000 ft)
– Maximum temperature when operating under the unpressurized condition: 31.3°C (88°F)
Note: When you charge the battery pack, its temperature must be at least 10°C (50°F).
• Relative humidity:
– Operating: 8%-80%
– Storage: 5%-95%
If possible, place your computer in a well-ventilated and dry area without direct exposure to sunshine.
Keep electrical appliances such as an electric fan, a radio, an air conditioner, and a microwave oven away
from your computer. The strong magnetic fields generated by these appliances can damage the monitor and
data on the hard disk drive or hybrid drive.
Do not place any beverages on top of or beside the computer or other attached devices. If liquid is spilled on
or in the computer or an attached device, a short circuit or other damage might occur.
Do not eat or smoke over your keyboard. Particles that fall into your keyboard can cause damage.
Lenovo programs
Your computer comes with Lenovo programs to help you work easily and securely.
Note: The available programs are subject to change without notice.
To learn more about the programs and other computing solutions offered by Lenovo, go to:
http://www.lenovo.com/support

Accessing Lenovo programs on the Windows 7 operating system
You can access Lenovo programs on the Windows 7 operating system through Windows Search or from
Control Panel. The icon name displayed in the search result or Control Panel might be different from the
program name. You can find the program by its program name or icon name as shown in the Lenovo
programs available on the Windows 7 operating system table.
Note: If you do not find the program you need, open the Lenovo ThinkVantage® Tools program to find the
dimmed icon for the program. Then double-click the icon to install the program.
To access Lenovo programs through Windows Search, do the following:

1. Click the Start button and then type the program name or the icon name into the search box.
2. Locate the program by the program name or the icon name and then click the program to launch it.
To access Lenovo programs from Control Panel, do the following:
Note: Some Lenovo programs might not be displayed in Control Panel. To find these programs, use
Windows Search.
1. Click Start ➙ Control Panel. Change the view of Control Panel from Category to Large icons or Small
icons.
2. Locate the program by the icon name and then click the program to launch it.
Depending on the model, your computer might support the following Lenovo programs:
Table 1. Lenovo programs available on the Windows 7 operating system

Program name Icon name
Access Connections™ Lenovo - Internet Connection
Active Protection System™ Lenovo - Airbag Protection
Communications Utility Lenovo - Web Conferencing
Lenovo Microphone Mute Lenovo-Microphone Mute
SHAREit SHAREit
Lenovo QuickControl Lenovo QuickControl
Lenovo QuickDisplay Lenovo QuickDisplay
Lenovo Solution Center Lenovo - System Health and Diagnostics
Lenovo ThinkVantage Tools Lenovo ThinkVantage Tools
Message Center Plus Messages from Lenovo
Password Manager Lenovo - Password Vault
Power Manager Lenovo - Power Controls
Recovery Media Lenovo - Factory Recovery Disks or Create Recovery Media
Rescue and Recovery® Lenovo - Enhanced Backup and Restore
System Update Lenovo - Update and Drivers
16 User Guide
Accessing Lenovo programs on the Windows 8.1 operating system
You can access Lenovo programs on the Windows 8.1 operating system from the Start screen or the
Apps screen.
Press the Windows key to go to the Start screen. Click a Lenovo program to launch it. If you cannot find
the program you need, click the arrow icon to go to the Apps screen. Find the desired program in the
list or search for the program in the search box.
Note: If you do not find the program you need, go to Lenovo PC Experience ➙ Lenovo Tools. Then you
can find the program you need.
Depending on the model, your computer might support the following Lenovo programs:

• Active Protection System
• Lenovo Companion
• Lenovo Microphone Mute
• SHAREit
• Lenovo QuickControl
• Lenovo Settings
• Lenovo Solution Center
• Lenovo PC Experience
• Password Manager
• System Update
An introduction to Lenovo programs

This topic provides a brief introduction to some Lenovo programs.

• Access Connections (Windows 7)
The Access Connections program is a connectivity assistant program for creating and managing location
profiles. Each location profile stores all the network and Internet configuration settings needed for
connecting to a network infrastructure from a specific location such as a home or an office.
By switching between location profiles as you move your computer from place to place, you can quickly
and easily connect to a network with no need to manually reconfigure your settings and restart the
computer each time.
• Communications Utility (Windows 7)
The Communications Utility program enables you to configure settings for the integrated camera and
audio devices.
• Lenovo QuickDisplay (Windows 7)
The Lenovo QuickDisplay program enables you to establish a connection between your computer and a
Wi-Fi display projector. This provides you with a quick and easy way to make presentations.
• Lenovo ThinkVantage Tools (Windows 7)

The Lenovo ThinkVantage Tools program helps you work more easily and securely by providing easy
access to various program, such as Lenovo Solution Center and so on.
• Message Center Plus (Windows 7)
The Message Center Plus program automatically displays messages to inform you about important notices
from Lenovo, such as alerts on system updates and alerts on conditions that require your attention.
• Power Manager (Windows 7)
The Power Manager program provides convenient, flexible, and complete power management for the
computer. It enables you to adjust your computer power settings to achieve the best balance between
performance and power saving.
• Recovery Media (Windows 7)
The Recovery Media program enables you to restore the contents of the storage drive to the factory
default settings.
• Rescue and Recovery (Windows 7)
The Rescue and Recovery program is a one-button recovery and restore solution. It includes a set of
self-recovery tools to help you diagnose computer problems, get help, and recover from system crashes,
even if you cannot start the Windows operating system.
• Lenovo Companion (Windows 8.1)
Your system’s best features should be easy to access and understand. With Lenovo Companion, they
are. Use Lenovo Companion to register your computer, access your user manual, manage system health
and update, check the warranty status, and see accessories customized for your computer. You also
can read hints and tips, explore Lenovo forums, and stay up-to-date on technology news with articles
and blogs from trusted sources. This app is filled with exclusive Lenovo content to help you learn about
your new system.
• Lenovo Settings (Windows 8.1)
The Lenovo Settings program enables you to enhance your computing experience by turning your
computer into a portable hotspot, configuring camera and audio settings, optimizing your power settings,
and creating and managing multiple network profiles.
• Lenovo PC Experience (Windows 8.1)
The Lenovo PC Experience program helps you work more easily and securely by providing easy access to
various programs, such as Active Protection System, User Guide, and Lenovo Solution Center.
• Active Protection System (Windows 7 and Windows 8.1)
The Active Protection System program protects your hard disk drive when the shock sensor inside your
computer detects a condition that could damage the drive, such as system tilt, excessive vibration, or
shock. The hard disk drive is less vulnerable to damage when it is not operating. This is because when
the hard disk drive is not operating, the system stops it from spinning, and might also move the read
and write heads of the drive to areas that do not contain data. As soon as the shock sensor senses
that the environment is stable again (minimal change in system tilt, vibration, or shock), it turns on the
hard disk drive.
• Lenovo Microphone Mute (Windows 7 and Windows 8.1)
The Lenovo Microphone Mute program enables you to set which recording devices will be controlled by
the microphone-mute key on your computer. By pressing the microphone-mute key, you can mute or
unmute the recording devices that you have selected in the Lenovo Microphone Mute program.
• SHAREit (Windows 7 and Windows 8.1)
The SHAREit program enables you to share files easily and rapidly across devices such as computers and
smartphones, even without any Internet connection. You can connect to your friends and send photos,
folders, and other files through SHAREit. Every sharing is quick and simple.
• Lenovo QuickControl (Windows 7 and Windows 8.1)
18 User Guide
The Lenovo QuickControl program enables you to control your computer remotely from your smartphone.
You can control the mouse, enter text, control movies and music, give presentations, and more.
• Lenovo Solution Center (Windows 7 and Windows 8.1)
The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. It
combines diagnostic tests, system information collection, security status, and support information, along
with hints and tips for optimal system performance.
• Password Manager (Windows 7 and Windows 8.1)
The Password Manager program automatically captures and fills in authentication information for
Windows programs and Web sites.
• System Update (Windows 7 and Windows 8.1)
The System Update program enables you to keep the software on the computer up-to-date by
downloading and installing software packages, including ThinkVantage programs, device drivers, Unified
Extensible Firmware Interface (UEFI) basic input/output system (BIOS) updates, and other third-party
programs.

20 User Guide
Chapter 2. Using your computer
This chapter provides information on using some of the computer components.

• “Registering your computer” on page 21
• “Frequently asked questions” on page 21
• “Using the tablet buttons” on page 23
• “Using the multi-touch screen” on page 23
• “Operating modes” on page 26
• “Using the keyboard” on page 32
• “Special keys” on page 34
• “ThinkPad pointing device” on page 36
• “Power management” on page 41
• “Connecting to the network” on page 44
• “Using an external display” on page 48
• “Using audio features” on page 49
• “Using the camera” on page 50
• “Using a flash media card” on page 51
Registering your computer

When you register your computer, information is entered into a database, which enables Lenovo to contact
you in case of a recall or other severe problem. In addition, some locations offer extended privileges and
services to registered users.
When you register your computer with Lenovo, you also will receive the following benefits:
• Quicker service when you call Lenovo for help
• Automatic notification of free software and special promotional offers
To register your computer with Lenovo, go to http://www.lenovo.com/register and follow the instructions on
the screen to register your computer.
If you are using a Windows 7 operating system, you also can register your computer through the preinstalled
Lenovo Product Registration program. The program launches automatically after you have used your
computer for a period of time. Follow the instructions on the screen to register your computer.
Frequently asked questions

The following are a few tips that will help you optimize the use of your computer.
To ensure that you receive the best performance from your computer, go to the following Web page
to find information such as aids for troubleshooting and answers to frequently asked questions:
http://www.lenovo.com/support/faq
Can I get my user guide in another language?

• To download the user guide in another language, go to: http://www.lenovo.com/support. Then follow
the instructions on the screen.
How to turn off my computer?

• For Windows 7: Open the Start menu, then click Shut down.
• For Windows 8.1: Do one of the following:
– Go to the Start screen by pressing the Windows key, click the power icon in the top-right corner
of the screen, then click Shut down.
– Move your pointer to the top-right or bottom-right corner of the screen to display the charms. Then
click Settings ➙ Power ➙ Shut down.
Note: You also can open the Settings charm by pressing the settings key .
How to use the battery power more effectively?

• To conserve power, or to suspend operation without exiting applications or saving files, see “Power-saving
modes” on page 43.
• To achieve the best balance between performance and power saving, create and apply power plans.
See “Managing the battery power” on page 43.
Concerned about security or need to securely dispose of data stored on your storage drive?
• Study Chapter 4 “Security” on page 57 to find out how you can protect your computer from theft and
unauthorized use.
• Use the Password Manager program to protect the data stored on your computer. For details, see the
help information system of the program.
• Before you dispose of the data on the storage drive, be sure to read “Notice on deleting data from
your storage drive” on page 63.
Is getting connected in different locations a challenge?

• To troubleshoot a wireless networking issue, go to:
http://www.lenovo.com/support/faq
• Take advantage of the networking features by use of the Access Connections program (on the Windows 7
operating system) or the Location Awareness program (on the Windows 8.1 operating system).
• To learn more about using the wireless features of your computer, refer to “Wireless connections” on
page 44.
• To travel more confidently, be sure to check the tips in “Traveling with your computer” on page 136.
• Press the wireless-switching key to enable or disable the wireless features.
Need to give presentations or attach an external monitor often?

• Ensure that you follow the procedure for “Using an external display” on page 48.
• With the Extend desktop function, you can display output on both the computer display and an external
monitor.
You have been using your computer for some time already, and it is getting slower?
• Follow the “General tips for preventing problems” on page 81.
• You can diagnose problems yourself by using the preinstalled diagnostic software.
• Check for recovery solutions in Chapter 8 “Recovery overview” on page 103.
22 User Guide
Can I change the Windows 8.1 startup behavior to open either the desktop or the Start screen?
• On the Windows 8.1 operating system, you can set the computer to open either the desktop or the Start
screen by default. To set the default startup screen, do the following:
1. On the desktop, move your pointer to the taskbar at the bottom of the screen and right-click or
tap on the windows notification area.
2. Click or tap Properties. The Taskbar and Navigation properties window is displayed.
3. On the Navigation tab, locate the Start screen section, and then do one of the following:
– To set the desktop as your default startup screen, select When I sign in or close all apps on a
screen, go to the desktop instead of Start so a check is visible.
– To set the Start screen as your default startup screen, remove the check from the When I sign in
or close all apps on the screen, go to desktop instead of Start checkbox.
4. Click or tap OK to save the new setting.
Print the following sections and keep them with your computer in case you are unable to access this online
user guide when necessary.
• “Installing the Windows 8.1 operating system” on page 66
• “Computer stops responding” on page 87
• “Power problems” on page 99
Using the special buttons

This topic provides instructions on how to use the special buttons.
The computer is equipped with some special buttons as shown in the following illustration. You can control
some functions of your computer through the special buttons, without the use of the keyboard.
1 Power button: Press the power button to turn on the computer.
2 Speaker volume-up button: Press the speaker volume-up button to increase the speaker volume.
3 Speaker volume-down button: Press the speaker volume-down button to decrease the speaker volume.
4 Screen-rotation-lock button: Press the screen-rotation-lock button to lock the screen-rotation function.
Using the multi-touch screen

This topic provides instructions on how to use the multi-touch screen that are available on some models.
Chapter 2. Using your computer 23

Notes:
• Your computer screen might look different from the following illustrations.
• Depending on the app you use, some gestures might not be available.
Touch gesture (touch models Description

only)
Touch: Tap.
Mouse action: Click.
Function: Open an app or perform an action on an open app, such as Copy,

Save, and Delete, depending on the app.
Supported operating systems: Windows 7 and Windows 8.1

Touch: Tap and hold.
Mouse action: Right-click.
Function: Open a menu with multiple options.

Touch: Slide.
Mouse action: Scroll the mouse wheel, move the scroll bar, or click the scroll
arrow.
Function: Scroll through items, such as lists, pages, and photos.

Touch: Drag an item to the desired location.
Mouse action: Click, hold, and drag an item.
Function: Move an object.
Touch: Move two fingers closer together.
Mouse action: Press the Ctrl key while scrolling the mouse wheel backward.
Function: Zoom out.

Touch: Move two fingers farther apart.
Mouse action: Press the Ctrl key while scrolling the mouse wheel forward.
Function: Zoom in.
24 User Guide
only)
Touch: Put two or more fingers on an item and then rotate your fingers clockwise
or counterclockwise.
Mouse action: If the app supports rotation, click the rotation icon.
Function: Rotate an item.

Touch: Swipe in from the right edge.
Mouse action: Move the pointer to the bottom-right or top-right corner of your
screen.
Function: Display the charms that contain system commands, such as Start,
Settings, Search, Share, and Devices.
Supported operating system: Windows 8.1

Touch: Swipe in from the left edge.
Mouse action: Move the pointer to the top-left corner of your screen, and then
click. Keep clicking to cycle through the open apps.
Function: Cycle through and switch to open apps.

Touch: Swipe in and out on the left edge.
Mouse action: Move the pointer to the top-left corner of the screen, and then
move the pointer downward along the left edge. To make a selection, click the
desired app.
Function: View the recently used apps or select an active app from the list.

Touch: Swipe up to the top edge.
Mouse action: Click the downward arrow ( ) located near the bottom-left corner
of the Start screen.
Function: View all apps on the Start screen.

Touch: Swipe in from the top or bottom edge of the Start screen, tap Customize,
and then tap the desired icon.
Mouse action: Right-click a blank area on the Start screen, click Customize,
and then click the desired icon.
Function: Customize tiles on the Start screen, or uninstall an app.

only)
Touch: Swipe in from the top or bottom edge of an open app.
Mouse action: Right-click anywhere on an open app.
Function: View the app commands on an open app, such as Copy, Save, and
Delete, depending on the app.
Touch: Swipe in from the top edge to the bottom on an open app.
Mouse action: From the top edge of the screen, click, hold, and move the pointer
to the bottom of the screen. Then, release the button.
Function: Close the current app.
Tips on using the multi-touch screen

• The multi-touch screen is a glass panel covered with a plastic film. Do not apply pressure or place any
metallic object on the screen, which might damage the touch panel or cause it to malfunction.
• Do not use fingernails, gloved fingers, or inanimate objects for input on the screen.
• Regularly calibrate the accuracy of the finger input to avoid a discrepancy.
Tips on cleaning the multi-touch screen

• Turn off the computer before cleaning the multi-touch screen.
• Use a dry, soft, and lint-free cloth or a piece of absorbent cotton to remove fingerprints or dust from the
multi-touch screen. Do not apply solvents to the cloth.
• Gently wipe the screen using a top-down motion. Do not apply any pressure on the screen.
Operating modes
This section provides information about the operating modes of your computer. Your computer provides
the notebook mode, stand mode, tablet mode, and tent mode that enable you to work more conveniently
in your working environment.
This section contains the following topics:

• “Enabling the operating modes” on page 26
• “Rotating the computer display” on page 27
• “Notebook mode” on page 27
• “Stand mode” on page 28
• “Tablet mode” on page 29
• “Tent mode” on page 31
Enabling the operating modes

To provide your computer the flexibility of being used in various operating modes, enable the operating
modes first.
26 User Guide
For the Windows 7 operating system, do one of the following to enable the operating modes:
• When you enter the Windows 7 operating system for the first time, the Enable sensors window is
displayed. Then click Enable this sensor.
• Go to Control Panel. Click All Control Panel Items ➙ Location and Other Sensors. Then select the
check box for STMicroelectronics Sensor Hub.
For the Windows 8.1 operating system, the operating modes are enabled by default.
Rotating the computer display

This topic provides instructions on how to rotate the display of your ThinkPad Yoga® 15 computer properly.
This topic also provides information on the operating modes of your computer and corresponding display
angle ranges.
You can open the computer display to any angle within a range of up to 360 degrees as shown in the
following illustration.
Attention: Do not rotate the computer display with too much force, otherwise the computer display
or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner of
the computer display.
Notebook mode
You can use the computer in the notebook mode in scenarios that require using a keyboard and a mouse,
such as editing documents and writing e-mails.
Open the computer display slowly to any angle within a range of less than 190 degrees as shown in the
following illustration. Your computer is now in the notebook mode.

Note: The degrees refers to the angle degrees between the computer display and the keyboard.
In the notebook mode, the keyboard, the trackpad, and the TrackPoint pointing stick are automatically
enabled.
By default, the autorotate feature is enabled. To avoid undesired screen rotation, press the
screen-rotation-lock button to disable the autorotate feature. For instructions on how to use the button, refer
to “Using the tablet buttons” on page 23. After you press the screen-rotation-lock button, the autorotate
feature is disabled and the autorotate-off indicator is displayed on your screen.
Stand mode
You can use the ThinkPad Yoga 15 notebook computer in the stand mode in scenarios that require limited
interaction with the screen, such as viewing photos and playing videos.
If your computer is in the notebook mode, do the following to turn the computer from the notebook mode
into the stand mode:
1. Slowly rotate the display clockwise to any angle within a range from 190 degrees to 359 degrees.
28 User Guide
2. Position your computer as shown. Your computer is now in the stand mode.
In the stand mode, the keyboard, the trackpad, and the TrackPoint pointing stick are automatically disabled.
By default, the autorotate feature is enabled. To avoid undesired screen rotation, press the
screen-rotation-lock button to disable the autorotate feature. For instructions on how to use the button, refer
to “Using the tablet buttons” on page 23. After you press the screen-rotation-lock button, the autorotate
feature is disabled and the autorotate-off indicator is displayed on your screen.
In the stand mode, you can use the special buttons to control your computer. For instructions on how to use
the special buttons, refer to “Using the tablet buttons” on page 23.
Tablet mode
You can use the computer in the tablet mode in scenarios that require frequent interaction with the screen,
such as browsing the Web site.

If your computer is in the stand mode, do the following to turn the computer from the stand mode into
the tablet mode:
1. Position your computer as shown and slowly rotate the computer display clockwise to the angle
of 360 degrees.
2. Position your computer as shown. Your computer is now in the tablet mode. By default, the autorotate
feature is enabled.
3. To avoid undesired screen rotation in the tablet mode, press the screen-rotation-lock button to disable
the autorotate feature. For instructions on how to use the button, refer to “Using the tablet buttons”
on page 23.
Note: After you press the screen-rotation-lock button, the autorotate feature is disabled and the
autorotate-off indicator is displayed on your screen.
30 User Guide
In the tablet mode, the keyboard, the trackpad, and the TrackPoint pointing stick are automatically disabled.
However, you can control some functions of your computer through the special buttons and the multi-touch
screen, without the use of the keyboard and the touch pad. For more information, refer to “Using the tablet
buttons” on page 23 and “Using the multi-touch screen” on page 23.
Tent mode
You can use the ThinkPad Yoga 15 notebook computer in the tent mode in scenarios that require limited
interaction with the screen, such as viewing photos and making a presentation.

If your computer is in the tablet mode, do the following to turn the computer from the tablet mode into the
tent mode:
1. Slowly rotate your computer display anticlockwise to any angle within a range of 190 degrees to 359
degrees.
2. Position your computer as shown. Your computer is now in the tent mode.
In the tent mode, the keyboard and the touch pad are automatically disabled. However, you can control
some functions of your computer through the special buttons and the multi-touch screen, without the use
of the keyboard and the touch pad. For more information, refer to “Using the tablet buttons” on page 23
and “Using the multi-touch screen” on page 23.
Using the keyboard

Your computer keyboard features the frame travel function. This topic provides information on the behavior
of the keyboard.
Notes:
• Your computer might look slightly different from the illustrations in this topic.
32 User Guide
• In the notebook mode, the keyboard, the trackpad, and the TrackPoint pointing stick are automatically
enabled. In the stand mode, tablet mode, and tent mode, the keyboard, the trackpad, and the TrackPoint
pointing stick are automatically disabled.
The following illustration shows the location of the keyboard.
Behavior of the keyboard

The frame of the keyboard travels upward when you rotate the computer display from 190 degrees to 360
degrees. The following are some scenarios for using the keyboard:
• The frame of the keyboard does not travel when you rotate the computer display from 10 degrees to 190
degrees. The following illustration shows the keyboard when the keyboard frame does not travel.
• When you rotate the computer display from 190 degrees to 360 degrees, the frame of the keyboard
travels upward for about 2.0 mm (0.08 inch). The following illustration shows the keyboard after the
keyboard frame travels upward.

Customizing the keyboard
You can customize the keyboard to achieve the extended functions of the keyboard.
To customize the keyboard, do the following:

1. Go to Control Panel.
2. Click Hardware and Sound ➙ Device Manager ➙ Keyboards ➙ Standard PS/2 keyboard and then
follow the instructions on the screen.
Special keys
The following illustration shows the locations of main special keys for your computer.
Notes:
• Your computer might look slightly different from the illustrations in this topic.
• In the notebook mode, the keyboard, the trackpad, and the TrackPoint pointing stick are automatically
enabled. In the stand mode, tablet mode, and tent mode, the keyboard, the trackpad, and the TrackPoint
pointing stick are automatically disabled.
34 User Guide
1 Function keys
• + : Press Fn+Esc to enable or disable the Fn Lock function.

When the Fn Lock function is disabled: The Fn Lock indicator is off (default mode). To initiate the
special function of each key, press the function key directly. To input F1-F12, you need to press the Fn
key and the corresponding function key.
When the Fn Lock function is enabled: The Fn Lock indicator turns on. To input F1-F12, press the
function keys directly. To initiate the special function of each key, you need to press the Fn key and the
corresponding function key.
• : Mutes or unmutes the speakers. When the speakers are muted, the speaker-mute indicator turns
on.
If you mute the sound and turn off your computer, the sound will remain muted when you turn on your
computer again. To turn on the sound, press the speaker mute key , the speaker volume-down
key , or the speaker volume-up key .
• : Decreases the speaker volume.
• : Increases the speaker volume.
• : Mutes or unmutes the microphones. When the microphones are muted, the microphone-mute
indicator turns on.
If you mute the microphones and turn off your computer, the microphones will remain muted when you
turn on your computer again. To unmute the microphones, press the microphone mute key .
• : Darkens the display.
• : Brightens the display.

You can temporarily change the computer display brightness by pressing the two keys. To change the
default brightness level, right-click the battery-status icon in the Windows notification area. Then click
Adjust screen brightness and make changes as desired.
• : Switches the display output location between the computer display and an external monitor.
Note: You also can press Windows+P to switch between the computer display and an external monitor.

• : Enables or disables the wireless networking features. For more information on the wireless features,
refer to “Wireless connections” on page 44.
• :
For Windows 7: Opens Control Panel.
For Windows 8.1: Opens the Settings charm.
• :
For Windows 7: Opens Windows Search.
For Windows 8.1: Opens the Search charm.
• : Views the programs that you have opened.
• :
For Windows 7: Opens Computer.
For Windows 8.1: Views all the programs.
• + : Controls the keyboard backlight. There are three modes for the keyboard
backlight: Off, Low, and High. Press Fn+Spacebar to change the modes of the keyboard backlight.
• Fn+B: Has the same function as the Break key.
• Fn+P: Has the same function as the Pause key.
• Fn+S: Has the same function as the SysRq key.
• Fn+K: Has the same function as the ScrLK key.
2 Windows key
Press the Windows key to switch between the current workspace and the Start screen.
For information about using the Windows key with other keys, refer to the help information system of the
Windows operating system.
3 Numeric keypad
You can use this numeric keypad to input numbers quickly.
4 Additional shortcut keys

Your computer has four additional shortcut keys:
• : Launch calculator
• : Lock operating system
• : Open the default Web browser
• : Open Computer

The ThinkPad pointing device enables you to perform all the functions of a traditional mouse, such as
pointing, clicking, and scrolling. With the ThinkPad pointing device, you also can perform a variety of touch
gestures, such as rotating and zooming in or out.
36 User Guide
The ThinkPad pointing device consists of the following two devices:
1 TrackPoint pointing device

2 Trackpad
By default, both the TrackPoint pointing device and the trackpad are active with the touch gestures enabled.
To change the settings, see “Customizing the ThinkPad pointing device” on page 40.
TrackPoint pointing device

The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as
pointing, clicking, and scrolling.
The TrackPoint pointing device consists of the following four components:
1 Pointing stick
2 Left-click button (primary-click button)
3 Right-click button (secondary-click button)
4 Scroll bar
To use the TrackPoint pointing device, refer to the following instructions:
Note: Place your hands in the typing position and use your index finger or middle finger to apply pressure to
the pointing-stick nonslip cap. Use either thumb to press the left-click button or right-click button.

• Point
Use the pointing stick 1 to move the pointer on the screen. To use the pointing stick, apply pressure to
the pointing-stick nonslip cap in any direction parallel to the keyboard. The pointer moves accordingly
but the pointing stick itself does not move. The speed at which the pointer moves depends on the
amount of pressure you apply to the pointing stick.
• Left-click
Press the left-click button 2 to select or open an item.
• Right-click
Press the right-click button 3 to display a shortcut menu.
• Scroll
Press and hold the dotted scroll bar 4 while applying pressure to the pointing stick in the vertical or
horizontal direction. Then you can scroll through the document, Web site, or apps.
Trackpad
The entire trackpad is sensitive to finger touch and movement. You can use the trackpad to perform all the
pointing, clicking, and scrolling functions of a traditional mouse.
The trackpad can be divided into two zones:
1 Left-click zone (primary-click zone)

2 Right-click zone (secondary-click zone)
To use the trackpad, refer to the following instructions:

• Point
Slide one finger across the surface of the trackpad to move the pointer accordingly.
• Left-click
Press the left-click zone 1 to select or open an item.
You also can tap anywhere on the surface of the trackpad with one finger to perform the left-click action.
• Right-click
Press the right-click zone 2 to display a shortcut menu.
You also can tap anywhere on the surface of the trackpad with two fingers to perform the right-click action.
• Scroll
Put two fingers on the trackpad and move them in the vertical or horizontal direction. This action enables
you to scroll through the document, Web site, or apps. Ensure that you position your two fingers slightly
apart from each other.
38 User Guide
With the trackpad, you also can perform a variety of touch gestures. For information about using the touch
gestures, see “Trackpad touch gestures” on page 39.
Trackpad touch gestures

The entire trackpad surface is sensitive to finger touch and movement. You can use the trackpad to perform
the same point and click actions as you would using a traditional mouse. You also can use the trackpad
to perform a variety of touch gestures.
This topic introduces the frequently used touch gestures such as tapping, dragging, scrolling, and rotating.
For more gestures, see the help information system of the ThinkPad pointing device.
Notes:
• When using two or more fingers, ensure that you position your fingers slightly apart.
• Some gestures are not available if the last action was done from the TrackPoint pointing device.
• Some gestures are only available when you are using certain apps.
Tap Two-finger tap

Tap anywhere on the trackpad Tap anywhere on the trackpad with
with one finger to select or open two fingers to display a shortcut
an item. menu.
Two-finger scroll Two-finger rotate

Put two fingers on the trackpad Put two fingers on the trackpad
and move them in the vertical or and rotate them clockwise or
horizontal direction. This action counterclockwise to rotate an item.
enables you to scroll through the
document, Web site, or apps.
Two-finger zoom out Two-finger zoom in

Put two fingers on the trackpad Put two fingers on the trackpad and
and move them closer together move them farther apart to zoom in.
to zoom out.
Three-finger swipe Four-finger swipe

Put three fingers on the trackpad Put four fingers on the trackpad
and move them left to show the and move them upward to view and
next item. Move them right to choose from opened apps.
show the previous item.
Four-finger swipe
Put four fingers on the trackpad
and move them downward to
show the desktop.
Note: The following touch gestures are available only on the Windows 8.1 operating system.

Swipe from the top edge Swipe from the top to the bottom
From the Start screen or the edge
current app, swipe in from Swipe from the top to the bottom
the top edge of the trackpad edge of the trackpad with one
with one finger to display the finger to close the current app.
command menu. Performing this gesture on the
desktop closes the desktop and
displays the Start screen.
Swipe from the right edge Swipe from the left edge
Swipe in from the right edge of Swipe in from the left edge of the
the trackpad with one finger to trackpad with one finger to show
display the charms. the previously used app.
Swipe in and out from the right Swipe in and out from the left
edge edge
Swipe in and out from the right Swipe in and out from the left edge
edge of the trackpad with one of the trackpad with one finger to
finger to hide the charms. display all the charms.
Customizing the ThinkPad pointing device

You can customize the ThinkPad pointing device so you can use it more comfortably and efficiently. For
example, you can choose to enable the TrackPoint pointing device, the trackpad, or both. You also can
disable or enable the touch gestures.
To customize the ThinkPad pointing device, do the following:

2. Click Hardware and Sound ➙ Mouse. The Mouse Properties window is displayed.
3. In the Mouse Properties window, select the ThinkPad tab.
Replacing the cap of pointing stick

The cap 1 on the end of the pointing stick is removable. After you use the cap for a period of time, you
might consider replacing the cap with a new one.
Note: Ensure that you use a cap with grooves a as shown in the following illustration.
40 User Guide
Power management
When you use your computer away from electrical outlets, you depend on battery power to keep your
computer running. Different computer components consume power at different rates. The more you use the
power-intensive components, the faster you consume battery power.
Spend more time unplugged with ThinkPad batteries. Mobility has revolutionized business by enabling
you to take your work wherever you go. With ThinkPad batteries, you will be able to work longer without
being tied to an electrical outlet.
Checking the battery status

The battery-status icon in the Windows notification area displays the percentage of battery power remaining.
The rate at which you use battery power will determine how long you can use the battery of your computer
between charges. Because each computer user has different habits and needs, it is difficult to predict how
long a battery charge will last. There are two main factors:
• How much energy is stored in the battery when you begin to work.
• The way you use your computer. For example:
– How often you access the storage drive.
– How bright you make the computer display.
– How often you use the wireless features.
To check for detailed battery status information, do the following:
• For Windows 7: Open the Power Manager program and click the Battery tab.
• For Windows 8.1: Open the Lenovo Settings program and click Power.
Enabling the battery alarm on the Windows 7 operating system

For the Windows 7 operating system, you can program your computer so that when the battery power falls
below a certain level, three events occur: the alarm goes off, a message is displayed, and the LCD is
turned off.
To enable the battery alarm, do the following:

1. Start the Power Manager program.
2. Click the Global Power Settings tab.

3. For Low battery alarm or Critically low battery alarm, set the percentage of the power level and set
the action.
Note: If your computer enters sleep or hibernation mode when the battery is low, but the alarm message
has not yet been displayed, the message will be displayed when the computer resumes. To resume normal
operation, when the message is displayed, click OK.
Using the ac power

The power to run your computer can come either from the battery or from ac power. While you use ac
power, the batteries charge automatically.
Your computer comes with an ac power adapter and a power cord.

• ac power adapter: Converts ac power for notebook computer use.
• Power cord: Connects the ac outlet and the ac power adapter.
Connecting to ac power
To connect the computer to ac power, do the following:
Attention: Using an improper power cord might cause severe damage to your computer.
Note: Ensure that you perform the actions in the order in which they are listed.
1. Connect the power cord to the ac power adapter.
2. Connect the ac power adapter to the power connector of the computer.
3. Connect the power cord into an electrical outlet.
Tips on using the ac power adapter

You can check the status of your battery at any time by looking at the battery meter at the bottom of
your display.
• When the ac power adapter is not in use, disconnect it from the electrical outlet.
• Do not bind the power cord tightly around the ac power adapter transformer pack when it is connected to
the transformer.
• Before you charge the battery, make sure that its temperature is at least 10°C (50°F).
• You can charge the battery when the ac power adapter is connected to the computer and the battery is
installed. You need to charge the battery in any of the following conditions:
– When you purchase a new battery
– When the battery meter at the bottom of your display shows that the battery power remaining is low.
– If the battery has not been used for a long time
Charging the battery

When you check battery status and find that the percentage of power remaining is low or when the power
alarm alerts you that the remaining power is low, you need to charge your battery or replace it with a
charged battery.
If an ac outlet is convenient, plug the ac power adapter into it, and then insert the connector into the
computer. The battery will be fully charged in about three to six hours. This is affected by the battery size
and the physical environment. The battery status indicator will let you know that the battery is charging, and
will also notify you when the battery is fully charged.
42 User Guide
Note: To maximize the life of the battery, the computer does not start recharging the battery if the remaining
power is greater than 95%.
Maximizing the battery life

To maximize the life of the battery, do the following:
• Use the battery until the charge is completely depleted.
• Recharge the battery completely before using it. You can see whether the battery is fully charged from the
battery-status icon in the Windows notification area.
• Always use power-saving modes, such as sleep mode, and hibernation mode.
Managing the battery power

To achieve the best balance between performance and power saving, adjust your power plan settings.
To access power plan settings, do the following:

• For Windows 7: Start the Power Manager program and then click the Power Plantab. For instructions on
how to start the Power Manager program, see “Accessing Lenovo programs on the Windows 7 operating
system” on page 16.
• For Windows 8.1: Go to the desktop. Right-click the battery-status icon in the windows notification area
and click Power Options. Then click Change plan settings that is next to your power plan.
For more information, refer to the help information system.
Power-saving modes
There are several modes that you can use at any time to conserve power. This section introduces each
mode and gives tips on the effective use of the battery power.
• Screen blank mode (for Windows 7 only)

The computer display requires considerable battery power. To turn off the power to the display and make
the computer enter screen blank mode, right-click the battery gauge icon in the windows notification area
and select Power off display.
• Sleep mode
In sleep mode, your work is saved to memory. The storage drive, and the computer display are turned off.
When your computer resumes to normal operation, your work is restored within seconds.
Depending on the model, your computer might support the 30 Day Standby function. When this function
is enabled, the computer consumes even less power in sleep mode and takes only seconds to resume
normal operation when you press the power button. For more information about the 30 Day Standby
function, do the following:
– For Windows 7: Refer to the help information system of the Power Manager program. For instructions
on how to start the Power Manager program, see “Accessing Lenovo programs on the Windows 7
operating system” on page 16.
– For Windows 8.1: Open the Lenovo Settings program and click Power ➙ 30 Day Standby.
To put your computer into sleep mode, do the following:
– For Windows 7: Use the Start menu shutdown option.
– For Windows 8.1: Move your pointer to the top-right or bottom-right corner of the screen to bring up
the charms. Then click Settings ➙ Power ➙ Sleep.
• Hibernation mode
By using this mode, you can turn off your computer completely without saving files or exiting any

programs that are running. When the computer enters hibernation mode, all open programs, folders, and
files are saved to the storage drive, and then the computer turns off.
If you put your computer into hibernation mode with the wake-up function disabled, the computer does
not consume any power. The wake-up function is disabled by default. If you put your computer into
hibernation mode with the wake-up function enabled, the computer consumes a small amount of power.
To enable the wake-up function, do the following:
1. Go to Control Panel and click System and Security.
2. Click Administrative Tools.
3. Click Task Scheduler. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. From the left pane, select the task folder for which you want to enable the wake-up function. The
scheduled tasks are displayed.
5. Click a scheduled task, and then click the Conditions tab.
6. Under Power, select the check box for Wake the computer to run this task.
To put the computer into hibernation mode, change your power plan settings by doing the following:
– For Windows 7: Start the Power Manager program and then click the Power Plan tab. Then follow
the instructions on the screen. For instructions on how to start the Power Manager program, see
“Accessing Lenovo programs on the Windows 7 operating system” on page 16.
– For Windows 8.1: Go to the desktop. Right-click the battery-status icon in the Windows notification
area and click More Power Options, click Change plan settings that is next to your power plan,
an then follow the instructions on the screen.
• Wireless off
When you are not using the wireless features, such as Bluetooth or wireless LAN, turn them off. This will
help conserve power. To turn off the wireless features, press the wireless-switching key .
Connecting to the network

Your computer has one or more network cards that enable you to connect your computer to the Internet
and other network connections.
Ethernet connections
You can connect your computer to a local network or a broadband connection through a ThinkPad USB 3.0
Ethernet Adapter, a supported ThinkPad OneLink Dock, or a supported ThinkPad OneLink Pro Dock.
DANGER
To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector
on a ThinkPad USB 3.0 Ethernet Adapter, a ThinkPad OneLink Dock, or a ThinkPad OneLink Pro
Dock.
Wireless connections
Wireless connection is the transfer of data without the use of cables but by means of radio waves only.
Attention:
• If you want to use the wireless features on an airplane, check the wireless services with the airline before
boarding the airplane.
44 User Guide
• If there are restrictions on the use of computer wireless features on an airplane, you need to disable the
wireless features of your computer before boarding.
Depending on the wireless devices installed on your computer, you might be able to use the following
wireless networks:
• Wireless LAN connection
• Wireless WAN connection
• Bluetooth connection
Using the wireless LAN connection

A wireless local area network (LAN) covers a relatively small geographic area, such as an office building or a
house. Devices based on the 802.11 standards can connect to this type of network.
Your computer comes with a wireless network card and a configuration utility to help you establish wireless
connections and monitor the connection status. This enables you to stay connected to your network while
you are at the office, in a meeting room, or at home, with no need for a wired connection.
To establish a wireless LAN connection, do the following:
For Windows 7:
1. Press the wireless-switching key and follow the instructions on the screen to enable the wireless
feature.
2. Click the wireless-network-connection-status icon in the Windows notification area. A list of available
wireless networks is displayed.
3. Double-click a network to connect to it. Provide required information if needed.
For Windows 8.1:
1. Go to the desktop and click the wireless-network-connection-status icon in the Windows notification
area. A list of available wireless networks is displayed.
Note: To display the list, ensure that airplane mode (flight mode) is set to off.
2. Double-click a network to connect to it. Provide required information if needed.
If you need to connect to different wireless networks in different locations, use the following software to
manage multiple network profiles so that the computer automatically connects to an available network when
the location changes:
• For Windows 7: Use the Access Connections program. For more information, see “Accessing Lenovo
programs on the Windows 7 operating system” on page 16.
• For Windows 8.1: Open the Lenovo Settings program and click Location Awareness. For more
information, see “Accessing Lenovo programs on the Windows 8.1 operating system” on page 17.
Tips for using the wireless LAN feature

To achieve the best connection, use the following guidelines:
• Place your computer so that there are as few obstacles as possible between the wireless LAN access
point and the computer.
• Open your computer lid to an angle of slightly more than 90 degrees.
• If you use the wireless feature (the 802.11 standards) of your computer simultaneously with a Bluetooth
option, the data transmission speed can be delayed and the performance of the wireless feature can be
degraded.

Checking the wireless-LAN connection status
You can check the wireless-LAN connection status through the wireless-network-connection-status icon in
the Windows notification area. The more bars encompassed, the better the signal is.
For the Windows 7 operating system, you also can check the Access Connections gauge, the Access
Connections status icon, or the Access Connections wireless status icon in the Windows notification area.
Access Connections gauge:
• Power to the wireless radio is off or no signal.
• Power to the wireless radio is on. The signal strength of the wireless connection is poor. To
improve signal strength, move your computer closer to the wireless access point.
• Power to the wireless radio is on. The signal strength of the wireless connection
is marginal.
• Power to the wireless radio is on. The signal strength of the wireless connection
is excellent.
Access Connections status icon:

• No location profile is active or none exists.
• Current location profile is disconnected.
• Current location profile is connected.
Access Connections wireless status icon:

• Power to the wireless radio is off.
• Power to the wireless radio is on. No association.
• Power to the wireless radio is on. No signal.
• Power to the wireless radio is on. The signal strength of the wireless connection is excellent.
• Power to the wireless radio is on. The signal strength of the wireless connection is marginal.
• Power to the wireless radio is on. The signal strength of the wireless connection is poor. To improve
signal strength, move your computer closer to the wireless access point.
Using the wireless WAN connection

Some computer models are equipped with a Wireless Wide Area Network (wireless WAN) card. Wireless
WAN, which uses cellular networks for data transmission, enables you to establish wireless connections
over remote public or private networks. These connections can be maintained over a large geographical
area, such as a city or an entire country, by use of multiple antenna sites or satellite systems maintained
by wireless service providers.
Some ThinkPad notebook computers come with a built-in wireless WAN card integrated with some wireless
WAN technologies, such as 1xEV-DO, HSPA, 3G, GPRS, or LTE. By using the built-in wireless WAN card and
the configuration utility that comes with your computer, you can establish wireless WAN connections and
monitor the connection status.
Note: The wireless WAN service is provided by authorized service providers in some countries.
Tips for using the wireless WAN feature

To achieve the best connection, use the following guidelines:
46 User Guide
• Keep your computer away from your body.
• Place your computer on a flat surface and open your computer lid to an angle of slightly more than
90 degrees.
• Place your computer away from concrete or brick walls that might dampen cellular signals.
• Best reception will be available near windows and other locations where cellular phone reception is the
strongest.
Checking the wireless-WAN connection status

You can check the wireless-WAN connection status through the wireless-network-connection-status icon in
the Windows notification area. The more bars encompassed, the better the signal is.
For the Windows 7 operating system, you also can check the Access Connections gauge, the Access
Connections status icon, or the Access Connections wireless status icon in the Windows notification area.
Access Connections gauge:
• No signal
• Weak signal
• Medium signal
• Strong signal
Access Connections status icon:

• No location profile is active or none exists.
• Current location profile is disconnected.
• Current location profile is connected.
Access Connections wireless status icon:

• Power to the WAN radio is off
• No association
• No signal
• Weak signal
• Medium signal
• Strong signal
Using the Bluetooth connection

Bluetooth can connect devices a short distance from one another, and is commonly used for connecting
peripheral devices to a computer, transferring data between hand-held devices and a personal computer, or
remotely controlling and communicating with devices such as mobile phones.
Depending on the model, your computer might support the Bluetooth feature. To transfer data through
the Bluetooth feature, do the following:
Note: If you use the wireless feature (the 802.11 standards) of your computer simultaneously with a
Bluetooth option, the data transmission speed can be delayed and the performance of the wireless feature
can be degraded.
• For Windows 7:

1. Press the wireless-switching key and then follow the instructions on the screen to enable
the Bluetooth feature.
2. Right-click the data that you want to send.
3. Select Send To ➙ Bluetooth Devices.
4. Select a Bluetooth device, and then follow the instructions on the screen.
• For Windows 8.1:
1. Go to the desktop, and then right-click the data that you want to send.
2. Select Send To ➙ Bluetooth Devices.
3. Select a Bluetooth device, and then follow the instructions on the screen.
For more information, refer to the Windows help information system and the Bluetooth help information
system.
Using an external display

You can use an external display such as a projector or a monitor to give presentations or to expand your
workspace. This topic introduces how to connect an external display, choose display modes, and change
display settings.
Your computer supports up to 1920 x 1080, with an external display connected to the HDMI connector
For more information about the external display, refer to the manuals provided with it.
Connecting an external display

You can use either a wired display or a wireless display. The wired display can be connected to the HDMI,
VGA, or mini DisplayPort connector by a cable. The wireless display can be added through the Wi-Di or
Miracast function.
• Connecting a wired display
Note: When you connect an external monitor, a video interface cable with a ferrite core is required.
1. Connect the external display to an appropriate video connector on your computer, such as the VGA
connector, mini DisplayPort connector, or HDMI connector.
2. Connect the external display to an electrical outlet.
3. Turn on the external display.
If your computer cannot detect the external display, right-click on the desktop, then click Screen
resolution ➙ Detect.
• Connecting a wireless display
Note: To use a wireless display, ensure that both your computer and the external display support the
Wi-Di or Miracast feature.
– For Windows 7
Open the Lenovo QuickDisplay program and follow the instructions on the screen. For how to access
the Lenovo QuickDisplay program, see “Lenovo programs” on page 15.
– For Windows 8.1
1. Move your pointer to the top-right or bottom-right corner of the screen to display the charms.
2. Click Devices ➙ Projector ➙ Add a wireless display.
3. Select the desired wireless display and follow the instructions on the screen.
48 User Guide
For more information, see the help information systems of the Lenovo QuickDisplay program and the
Windows 8.1 operating system.
Choosing a display mode

You can display your desktop and apps on the computer display, the external display, or both. To choose
how to display the video output, press the display-mode switching key and then select a display
mode you prefer.
There are four display modes:

• Disconnect: Displays the video output only on your computer screen.
Note: Depending on the situation, you might see Disconnect, PC screen only, Computer only, or
Disconnect projector.
• Duplicate: Displays the same video output on both your computer screen and an external display.
• Extend: Extends the video output from your computer display to an external display. You can drag and
move items between the two displays.
• Projector only: Shows the video output only on an external display.
Note: Depending on the situation, you might see Projector only or Second screen only.
Note: If you show DOS or programs using DirectDraw or Direct3D® in full-screen mode, only the main
display shows the video output.
Changing display settings

You can change the display settings, such as the display resolution, font size, and so on.
To change the display settings, do the following:

1. Open Control Panel and click Appearance and Personalization.
2. Click Display for further configuration.
3. Click Apply. The change will take effect after you log off.
Using audio features

Your computer is equipped with the following:
• Microphones
Note: The left microphone and right microphone automatically switch between each other when the
computer screen rotates.
• Speakers
Note: The left speaker and right speaker automatically switch between each other when the computer
screen rotates.
• Combo audio connector, 3.5 mm (0.14 inch) in diameter
Your computer also has an audio chip that enables you to enjoy various multimedia audio features, such
as the following:
• Compliant with Intel High Definition Audio
• Playback of Musical Instrument Digital Interface (MIDI) and Moving Picture Experts Group Audio Layer-3
(MP3) files

• Recording and playback of pulse-code modulation (PCM) and Waveform Audio File Format (WAV) files
• Recording from various sound sources, such as a headset attached
Note: The combo audio connector does not support a conventional microphone.
The following table shows which functions of the audio devices attached to the connectors on your computer
or the supported ThinkPad OneLink Dock are supported.
Table 2. Audio feature list

Connector Headset with a 3.5 mm Conventional Conventional
(0.14–inch), 4-pole plug headphone microphone
Combo audio connector Headphone and Headphone function Not supported
microphone functions supported
supported
Configuring for sound recording

To configure the microphone for optimal sound recording, use the Conexant HD Audio Manager program. To
start the program, go to Control Panel and click Hardware and Sound ➙ Conexant HD Audio Manager.
Using the camera

Depending on the model, your computer comes with a 2D camera or a 3D camera. The 3D camera works
with certain third-party apps, such as apps provided by Intel. The performance parameters of the 3D camera
vary depending on the app you use. To learn how to use the 3D camera with a specific app and to view the
performance parameters, search for the related information from the Intel Web site.
To start the camera, do the following:

• For Windows 8.1: Click Camera from the Start screen.
• For Windows 7: Open the Communications Utility program.
When the camera starts, the green camera-in-use indicator turns on.
You also can use the integrated camera with other programs that provide features such as photographing,
video capturing, and video conferencing. To use the camera with other programs, open one of the programs
and start the photographing, video capturing, or video conferencing function. Then, the camera starts
automatically and the green camera-in-use indicator turns on. For more information about using the camera
with a program, refer to the help information system of the program.
Configuring camera settings

You can configure the camera settings to meet your needs, such as adjusting the quality of the video output.
To configure the camera settings, do the following:

• For Windows 8.1, do one of the following:
– Configure the camera settings directly from the program that is using the camera. For details, see the
help information system of the program.
– Click Lenovo Settings from the Start screen. Then click Camera. Follow the instructions on the
screen to configure the camera settings.
• For Windows 7: Start the Communications Utility program and configure the camera settings.
50 User Guide
Using a flash media card
Your computer has a media card slot, it supports the following cards:
• MultiMediaCard (MMC) module
• Secure Digital eXtended-Capacity(SDXC) card
• Secure Digital (SD) card
• Secure Digital High-Capacity (SDHC) card
Note: Your computer does not support the CPRM feature for the SD card.
Attention: While transferring data to or from a flash media card, such as an SD card, do not put your
computer into sleep or hibernation mode before the data transfer completes; otherwise, your data could
become damaged.
Installing a flash media card

Attention:
• Before you start installing a card, touch a metal table or a grounded metal object. This action reduces any
static electricity from your body. Static electricity could damage the card.
To install a flash media card, do the following:

1. Ensure that the card is correctly oriented.
2. Insert the card firmly into the slot of the 4-in-1 media card reader.
If the plug-and-play feature is not enabled for the installed flash media card, do the following to enable
the feature:
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the
4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.
Removing a flash media card

Attention:
• Before removing a card, stop the card first. Otherwise, data on the card might be damaged or lost.
• Do not remove a card while the computer is in sleep mode or hibernation mode. Otherwise, the system
might not respond when you try to resume operation.
To remove a card, do the following:

1. Click the triangular icon on the windows notification area to show hidden icons. Then, right-click the
Safely Remove Hardware and Eject Media icon.
2. Select the item you want to remove to stop the card.
3. Press the card to eject it from your computer.
4. Remove the card and store it safely for future use.
Note: If you do not remove the card from your computer after you eject the card from the Windows operating
system, the card can no longer be accessed. To access the card, you must remove it first, then insert it again.

52 User Guide
Chapter 3. Enhancing your computer
This chapter provides instructions on how to use hardware devices to expand your computer capabilities.
• “Finding ThinkPad options” on page 53
• “ThinkPad OneLink Dock” on page 53
• “ThinkPad OneLink Pro Dock” on page 54
Finding ThinkPad options

If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and
upgrades to meet your needs. Options include storage devices, network cards, port replicators, batteries,
power adapters, printers, scanners, keyboards, mice, and more.
You can shop at Lenovo 24 hours a day, 7 days a week directly over the World Wide Web. All you need is an
Internet connection and a credit card.
To shop at Lenovo, go to:

http://www.lenovo.com/essentials
ThinkPad OneLink Dock

Depending on the model, your computer might support the ThinkPad OneLink Dock (hereafter referred to as
the dock). Attach your computer to the dock to expand the working capability.
This topic provides basic information about the dock. For detailed information about using the dock, refer
to the documentation that comes with the dock.
Note: Depending on the model, your dock might look slightly different from the illustrations in this topic.
Front view
1 Security-lock slotA: To protect your dock from theft, you can purchase a security cable lock, such as
a Kensington-style cable lock, that fits this security-lock slot to lock your dock to a desk, table, or other
non-permanent fixture.

2 USB 3.0 connector: Used to connect devices that are compatible with USB 3.0 and USB 2.0.
3 Always On USB connector: By default, the Always On USB connector enables you to charge some
mobile digital devices and smartphones no matter when your computer is in sleep mode, hibernation mode,
or is off. For more information, refer to the documentation that comes with the dock.
4 Combo audio connector: Used to connect headphones or a headset that has a 3.5-mm (0.14-inch),
4-pole plug.
5 System-status indicator: The indicator on the illuminated ThinkPad logo functions the same as the ones
on the computer. For details, see “Status indicators” on page 9.
6 Power button: The power button on the dock functions the same as the one on the computer.
Rear view
1 USB 2.0 connector: Used to connect devices that are compatible with USB 2.0.
2 Ethernet connector: Used to connect the dock to an Ethernet LAN. The indicators on this connector
have the same function as the ones on the computer.
3 HDMI connector: Used to connect a digital audio device or video monitor that is compatible with HDMI.
4 Power connector: Used to connect the ac power adapter.
5 Lenovo OneLink connector: Connect the Lenovo OneLink connector to the computer.
ThinkPad OneLink Pro Dock

Depending on the model, your computer might support the ThinkPad OneLink Pro Dock (hereafter referred to
as the dock). Attach your computer to the dock to expand the working capability.
This topic provides basic information about the dock. For detailed information about using the dock, refer
to the documentation that comes with the dock.
Note: Depending on the model, your dock might look slightly different from the illustrations in this topic.
54 User Guide
Front view
1 Security-lock slot: To protect your dock from theft, you can purchase a security cable lock, such as
a Kensington-style cable lock, that fits this security-lock slot to lock your dock to a desk, table, or other
non-permanent fixture.
2 USB 3.0 connector: Used to connect devices that are compatible with USB 3.0 and USB 2.0.
3 Always On USB connector: By default, the Always On USB connector enables you to charge some
mobile digital devices and smartphones no matter when your computer is in sleep mode, hibernation mode,
or is off. For more information, refer to the documentation that comes with the dock.
4 Combo audio connector: Used to connect headphones or a headset that has a 3.5-mm (0.14-inch),
4-pole plug.
5 System-status indicator: The indicator on the illuminated ThinkPad logo functions the same as the ones
on the computer. For details, see “Status indicators” on page 9.
6 Power button: The power button on the dock functions the same as the one on the computer.
Rear view
Chapter 3. Enhancing your computer 55

1 USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0.
2 USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0 and USB 2.0.
3 Ethernet connector: Used to connect the dock to an Ethernet LAN. The indicators on this connector
have the same function as the ones on the computer.
4 DisplayPort® connector: Used to attach a high-performance monitor, a direct-drive monitor, or other

devices that use a DisplayPort connector.
5 Power connector: Used to connect the ac power adapter.
6 DVI connector: Used to connect a monitor that supports Digital Visual Interface (DVI) connection.
7 Lenovo OneLink connector: Connect the Lenovo OneLink connector to the computer.
56 User Guide
Chapter 4. Security
This chapter provides information about how to protect your computer from theft and unauthorized use.
• “Using passwords” on page 57
• “Hard disk security” on page 61
• “Setting the security chip” on page 62
• “Notice on deleting data from your storage drive” on page 63
• “Using firewalls” on page 64
• “Protecting data against viruses” on page 64
Using passwords
You can help prevent your computer from unauthorized use by using passwords. Once you set a password,
a prompt is displayed on the screen each time you turn on the computer. Enter your password at the prompt.
You cannot use the computer unless you type the correct password.
If you have set a power-on password, a supervisor password, or a hard disk password, it unlocks
automatically when the computer resumes from sleep mode.
Note: If a Windows password has been set, you will be prompted to enter it.
Typing passwords
When this icon is displayed, type a power-on password or a supervisor password.
When this icon is displayed, type a user hard disk password. To type a master hard disk password,
press F1. When the icon changes to , type the master hard disk password
Note: To return to the icon , press F1 again.
Power-on password
You can set a power-on password to help protect your computer against unauthorized access.
If you set a power-on password, the password prompt is displayed on the screen whenever you turn on the
computer. You must enter the correct password to start using the computer.
Setting, changing, or removing a power-on password

Before you start, print these instructions.
To set, change, or remove a power-on password, do the following:

1. Turn off your computer. Wait for about five seconds, and then turn on the computer again.
2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.
3. Select Security ➙ Password ➙ Power-on Password by using the directional keys.
4. Depending on your need, do one of the following:

• To set a password, do the following:
a. In the Enter New Password field, type a desired password and press Enter.
b. In the Confirm New Password field, retype the password and press Enter.
• To change a password, do the following:
a. In the Enter Current Password field, type the current power-on password and press Enter.
b. In the Enter New Password field, type the new power-on password and press Enter; then retype
the password in the Confirm New Password field and Press Enter.
• To remove a password, do the following:
a. In the Enter Current Password field, type the current power-on password and press Enter.
b. Leave the Enter New Password and Confirm New Password fields blank. Press Enter twice.
5. A Setup Notice window is displayed. Press Enter to continue.
6. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changes
and exit.
Note: You might want to record your password and store it in a safe place. Otherwise, if you forget the
password, you have to take your computer to a Lenovo reseller or a marketing representative to have
the password canceled.
Supervisor password
The supervisor password protects the system information stored in the ThinkPad Setup program. If you have
set a supervisor password, no one can change the configuration of the computer without the password. It
provides the following security features:
• If only a supervisor password is set, a password prompt is displayed when you try to start the ThinkPad
Setup program. Unauthorized users cannot access the ThinkPad Setup program without the password.
• The system administrator can use the supervisor password to access a computer even if the user of that
computer has set a power-on password. The supervisor password overrides the power-on password.
• If both a supervisor password and a power-on password are set, you can do the following only if you
have the supervisor password:
– Changing or deleting the power-on password
– Changing or deleting the supervisor password
– Changing date and time
– Specifying the minimum length for power-on password and hard disk password
– Changing the setting for the security chip
– Changing the setting for the Virtualization
– Changing the setting for the I/O port access
– Changing the setting for the Anti-Theft
– Changing the setting for the Secure Boot
– Enabling or disabling the following features:
– Lock UEFI BIOS Settings
– Password at unattended boot
– Boot Device List F12 Option
– Boot Order Lock
– Flash BIOS Updating by End-Users
– Secure RollBack Prevention
58 User Guide
– Execution Prevention
– Security mode
Notes:
• The system administrator can set the same supervisor password on many ThinkPad notebook computers
to make administration easier.
• When Lock UEFI BIOS Settings option is enabled, all BIOS settings cannot be changed. To change
the settings, a supervisor password is required.
Setting, changing, or removing a supervisor password

Only a system administrator can set, change, or remove a supervisor password. To set, change, or remove a
supervisor password, do the following:
3. Select Security ➙ Password ➙ Supervisor Password by using the directional keys.
4. Depending on your needs, do one of the following:
• To set a password, do the following:
a. In the Enter New Password field, type a desired password and press Enter.
b. In the Confirm New Password field, retype the password and press Enter.
• To change a password, do the following:
a. In the Enter Current Password field, type the current supervisor password and press Enter.
b. In the Enter New Password field, type the new supervisor password and press Enter; then retype
the password in the Confirm New Password field and press Enter.
• To remove a password, do the following:
a. In the Enter Current Password field, type the current supervisor password and press Enter.
b. Leave the Enter New Password and Confirm New Password fields blank. Press Enter twice.
and exit.
Note: You might want to record your password and store it in a safe place. The next time you open the
ThinkPad Setup program, you will be prompted to type your supervisor password to proceed. If you forget
your supervisor password, Lenovo cannot reset your password. You must take your computer to a Lenovo
reseller or a Lenovo marketing representative to have the system board replaced. Proof of purchase is
required, and a fee will be charged for parts and service.
Hard disk passwords

The following two types of hard disk passwords can help protect the information stored on the hard disk
drive or hybrid drive:
• User hard disk password
If a user hard disk password has been set, but no master hard disk password has been, the user must
enter the user hard disk password to access files and applications on the hard disk drive or hybrid drive.
• Master hard disk password
Chapter 4. Security 59
The master hard disk password also requires a user hard disk password. The master hard disk password
is usually set and used by a system administrator. It enables the administrator to access any hard disk
drive or hybrid drive in a system like a master key. The administrator sets the master password; then
assigns a user password for each computer in the network. The user can then change the user password
as desired, but the administrator still can get access by using the master password.
When a master hard disk password is set, only the administrator can remove the user hard disk password.
Setting a hard disk password

To set a hard disk password, do the following:

3. Select Security ➙ Password ➙ Hard disk 1 Password by using the directional keys.
4. A password window is displayed. You are prompted to select User or User + Master. Select User if
you want to set only one hard disk password. Select User + Master if you want to set a user hard disk
password and a master hard disk password, for example if you are an administrator or a supervisor.
• If you select User, do the following:
a. When a window for typing the new password opens, type your new password in the Enter New
Password field and press Enter.
b. In the Confirm New Password field, retype the password you just entered and press Enter.
• If you select User + Master, do the following:
a. First, set a user hard disk password. When a message window prompts you to set the user hard
disk password, press Enter to continue. Type your new user hard disk password in the Enter
New Password field and press Enter. Retype the password in the Confirm New Password
field and press Enter.
b. Then, set a master hard disk password. When a message window prompts you to set the master
hard disk password. Press Enter to continue. Type your new master hard disk password in the
Enter New Password field and press Enter. Retype the password in the Confirm New Password
field and press Enter.
and exit.
The next time you turn on your computer, type the user or master hard disk password to start your computer
and access the operating system.
Changing or removing a hard disk password

To change or remove the hard disk password, do the following:
• If you are in User + Master hard disk mode, you can select either User HDP or Master HDP to change
the password, depending on your needs.
– If you select User HDP mode, follow the following steps to change the user hard disk password:
1. Type the current user hard disk password in the Enter Current Password field and press Enter.
2. Type the new password in the Enter New Password field and press Enter; then retype the
password in the Confirm New Password field and press Enter.
3. A Setup Notice window is displayed. Press Enter again to continue. The user hard disk password
is changed.
60 User Guide
Note: The hard disk password cannot be removed in User HDP mode.
– If you select Master HDP mode, follow the following steps to change the master hard disk password:
1. Type the current master hard disk password in the Enter Current Password field and press Enter.
2. Type the new master hard disk password in the Enter New Password field and press Enter; then
retype the new password you just entered in the Confirm New Password field and press Enter.
3. A Setup Notice window is displayed. Press Enter to continue. The master hard disk password is
changed.
Note: If you leave the Enter New Password and Confirm New Password fields blank and press Enter
twice, both the user and master hard disk passwords are removed.
• If you are in User hard disk mode, follow the following steps to change the user hard disk password:
1. Follow steps 1 through 7 in “Setting a hard disk password” on page 60, typing your password to
start the ThinkPad Setup program.
2. Type the current user hard disk password in the Enter Current Password field and press Enter.
3. Type the new password in the Enter New Password field and press Enter; then retype the new
password in the Confirm New Password field and press Enter.
4. A Setup Notice window is displayed. Press Enter again to continue. The user hard disk password is
changed.
Note: If you leave the Enter New Password and Confirm New Password fields blank and press Enter
twice, the user hard disk password is removed.
Tips on using the hard disk passwords

• You can set the minimum length of a hard disk password through the Security menu.
• If you set a hard disk password of over seven characters, the hard disk drive or hybrid drive can be used
only with a computer that can recognize a hard disk password of over seven characters. If you then install
the hard disk drive or hybrid drive in a computer that cannot recognize a hard disk password that contains
more than seven characters, you cannot access the drive.
• Record your password and store it in a safe place. If you forget the user hard disk password, or both user
and master hard disk passwords, Lenovo cannot reset your passwords or recover data from the hard disk
drive or hybrid drive. You must take your computer to a Lenovo reseller or a marketing representative
to have the hard disk drive or hybrid drive replaced. Proof of purchase is required, and a fee will be
charged for parts and service.
Hard disk security

To protect passwords from unauthorized security attacks, refer to the following tips to maximize security:
• Set a power-on password as well as a hard disk password for your internal solid-state drive, hard disk
drive or hybrid drive. Refer to the procedures in “Power-on password” on page 57 and “Hard disk
passwords” on page 59. For security, a longer password is recommended.
• To provide reliable security for UEFI BIOS, use the security chip and a security application with a Trusted
Platform Module (TPM) management feature. Refer to “Setting the security chip” on page 62.
Note: The Microsoft Windows 7 and Windows 8.1 operating system support the TPM management
feature.
• If a Disk Encryption hard disk drive, an Encryption solid-state drive, or a Disk Encryption hybrid drive is
installed in your computer, be sure to protect the contents of your computer memory from unauthorized
access by use of drive encryption software, such as Microsoft Windows BitLocker® Drive Encryption,
which is supported in the Ultimate and Enterprise editions of the Windows 7 operating system and
Professional and Enterprise editions of the Windows 8.1 operating system. Refer to “Using Windows
BitLocker Drive Encryption” on page 62.
• Before you dispose of, sell, or hand over your computer, be sure to delete data stored on it. For more
information, refer to “Notice on deleting data from your storage drive” on page 63.
Note: The hard disk drive or hybrid drive built into your computer can be protected by UEFI BIOS.
Using Windows BitLocker Drive Encryption

To help protect your computer against unauthorized access, be sure to use drive encryption software, such
as Windows BitLocker Drive Encryption.
Windows BitLocker Drive Encryption is an integral security feature of the Windows 7 and Windows 8.1
operating systems. It is supported in the Ultimate and Enterprise editions of the Windows 7, Professional
and Enterprise editions of the Windows 8.1 operating system. It can help you protect the operating system
and data stored on your computer, even if your computer is lost or stolen. BitLocker works by encrypting all
user and system files, including the swap and hibernation files.
BitLocker uses a Trusted Platform Module to provide enhanced protection for your data and to ensure early
boot component integrity. A compatible TPM is defined as a V1.2 TPM.
To check the BitLocker status, go to Control Panel, and click System and Security ➙ BitLocker Drive
Encryption.
For more information about Windows BitLocker Drive Encryption, see the help information system of the
Windows operating system, or search for “Microsoft Windows BitLocker Drive Encryption Step-by-Step
Guide” on the Microsoft Web site.
Disk Encryption hard disk drive, Encryption solid-state drive, and Disk Encryption hybrid drive
Some models contain the Disk Encryption hard disk drive, the Encryption solid-state drive, or the Disk
Encryption hybrid drive. This feature helps to protect your computer against security attacks on media,
NAND flash or device controllers by use of a hardware encryption chip. For the efficient use of the encryption
feature, be sure to set a hard disk password for the internal storage device.
Setting the security chip

Strict security requirements are imposed on network client computers that transfer confidential information
electronically. Depending on the options you ordered, your computer might have an embedded security chip,
a cryptographic microprocessor. With the security chip and Client Security Solution, you can do the following:
• Protect your data and system
• Strengthen access controls
• Secure communications
Setting the security chip

The choices offered on the Security Chip submenu under the Security menu of ThinkPad Setup are as
follows:
• Security Chip: Activate, inactivate, or disable the security chip.
• Security Reporting Options: Enable or disable each security reporting option.
• Clear Security Chip: Clear the encryption key.
62 User Guide
To set an item on the Security Chip submenu, do the following:
3. Select Security ➙ Security Chip by using the directional keys.
4. Press Enter. The Security Chip submenu opens.
5. Move to an item you want to set by using the directional keys. When the item is highlighted, press Enter.
6. Set other items that you want to set.
and exit.
To set the security chip, you have to start Client Security Solution, and follow the instructions on the screen.
Note: If Client Security Solution is not preinstalled on your computer, download and install it from
http://www.lenovo.com/support. Then follow the instructions on the screen.
Tips on using the security chip

• Ensure that the supervisor password has been set in ThinkPad Setup. Otherwise anyone can change the
settings for the security chip.
• If you are using Client Security Solution, handle the security chip by doing the following:
– Do not clear the security chip. If you do, the functions assigned to the keys will be erased.
– Do not disable the security chip. If you do, Client Security Solution will not work.
• If the security chip is removed or replaced, or a new one has been added, the computer will not start. You
will hear four cycles of four beeps each, or you will see error message 0176 or 0192.
• If the security chip is inactive or disabled, the Clear Security Chip option will not be displayed.
• When you clear the security chip, turn off your computer and then turn it on again after you set the
security chip to Active. Otherwise, the Clear Security Chip option is not displayed.
Notice on deleting data from your storage drive

Some of the data stored on storage drive might be sensitive. Handing your computer over to someone else
without deleting the installed software, such as operating systems and application software, might even
violate license agreements. Be sure to delete data stored on the storage drive before you dispose of, sell,
or hand over your computer.
You can use the following methods to delete data from the storage drive:
• Move the data to the Recycle Bin, and then empty the Recycle Bin.
• Delete the data.
• Format the storage drive, using the software for initializing it.
• Use the recovery program provided by Lenovo to bring the storage drive back to the factory default
settings.
These operations, however, only change the file location of the data; they do not delete the data itself. In
other words, the data retrieval processing is disabled under an operating system such as Windows. The
data is still there, even though it seems to be lost. Thus, it is sometimes possible to read the data by use of
special software for data recovery. There is a risk that people of bad faith might read and misuse the critical
data on the storage drive for unexpected purposes.
To prevent leakage of data, it is important that you delete all the data from the hard disk drive or hybrid drive
when you dispose of, sell, or hand over your computer. You can destroy the data physically by smashing the
hard disk drive or hybrid drive with a hammer, or magnetically by means of strong magnetic power, thus
making the data unreadable. But it is recommended that you use the software (payware) or service (pay
service) developed for that purpose. The process might take several hours.
For disposing of data on the solid-state drive, Lenovo provides the Drive Erase Utility for Resetting the
Cryptographic Key and Erasing the Solid State Drive tool. For disposing of data on the hard disk drive or
hybrid drive, Lenovo provides the Secure Data Disposal™ tool. Go to http://www.lenovo.com/support to
download these tools.
If an Encryption solid-state drive, a Disk Encryption hard disk drive, or a Disk Encryption hybrid drive is
supported and installed in your computer, you can logically dispose of all the data on the drive in a short
time by erasing the cryptographic key. The data encrypted with the old key is not physically erased but
remains on the drive; however, it cannot be decrypted without the old key. This feature is also available with
the Drive Erase Utility for Resetting the Cryptographic Key and Erasing the Solid State Drive tool.
Using firewalls
If your system is preinstalled with a firewall program, it protects against computer Internet security threats,
unauthorized accesses, intrusions, and Internet attacks. It also protects your privacy.
For more information about how to use the firewall program, refer to the help information system that
comes with the program.
Protecting data against viruses

Your computer is preinstalled with an antivirus program so you can detect and eliminate viruses. The
antivirus program is designed to help you detect and eliminate viruses.
Lenovo provides a full version of antivirus software on your computer with a free 30-day subscription. After
30 days, you must renew the license to continue receiving the antivirus software updates.
For more information about how to use your antivirus software, refer to the help information system of
your antivirus software.
64 User Guide
Chapter 5. Advanced configuration
While it is important to protect files, data, and settings that are on the storage drive, you also might need
to install a new operating system, install new device drivers, update your system UEFI BIOS, or recover
preinstalled software. This information will help you handle your computer with proper care and keep it
in top working shape.
• “Installing a new operating system” on page 65
• “Installing the Windows 7 operating system” on page 65
• “Installing the Windows 8.1 operating system” on page 66
• “Installing device drivers” on page 67
• “Using the ThinkPad Setup program” on page 67
• “Using system management” on page 79
Installing a new operating system

In some situations, you might need to install a new operating system. This topic provides instructions on
how to install a new operating system.
Installing the Windows 7 operating system

Attention:
• The process of installing a new operating system deletes all the data on your storage drive, including the
data that were stored in a hidden folder.
• If your computer is equipped with both a hard disk drive and an M.2 solid-state drive, do not use the
M.2 solid-state drive as a bootable device. The M.2 solid-state drive is used for “cache” function and to
support the Intel Rapid Start Technology.
To install the Windows 7 operating system, do the following:

1. Copy all the subdirectories and files in the C:\SWTOOLS directory to a removable storage device.
• The supplement files for the Windows 7 operating system are in the C:\SWTOOLS\OSFIXES directory.
• The device drivers are in the C:\SWTOOLS\DRIVERS directory.
• The preinstalled programs are in the C:\SWTOOLS\APPS directory.
2. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 67.
3. Select Startup ➙ UEFI/Legacy Boot. Then do one of the following:
• To install the Windows 7 (32-bit) operating system, select Legacy Only or Both.
• To install the Windows 7 (64-bit) operating system in Legacy mode, select Legacy Only.
• To install the Windows 7 (64-bit) operating system in UEFI mode, select UEFI Only.
4. Press the F10 key to exit the ThinkPad Setup program.
5. Insert the Windows 7 operating system installation DVD into the optical drive, and restart the computer.
6. Restore the C:\SWTOOLS directory that you backed up before installing the Windows 7 operating system.
7. Install the device drivers. See “Installing device drivers” on page 67.

8. Install the Windows 7 fix modules. You can find the Windows 7 fix modules in the C:\SWTOOLS\OSFIXES\
directory. For more information, go to the Microsoft Knowledge Base home page at:
http://support.microsoft.com/
9. Install the registry patches, for example the Enabling Wake on LAN from Standby for ENERGY STAR
patch. To download and install the registry patches, go to the Lenovo Support Web site at:
Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in the
ThinkPad Setup program. Otherwise the operating system will not start correctly.
When you install the Windows 7 operating system, you might need one of the following country or region
codes:
Country or region Code Country or region Code

China SC Netherlands NL
Denmark DK Norway NO
Finland FI Spain SP
France FR Sweden SV
Germany GR Taiwan and Hong Kong TC
Italy IT United States US
Japan JP
Installing the Windows 8.1 operating system

In some situations, you might need to install a new operating system. This topic provides instructions on
how to install a Windows 8.1 operating system.
Attention:
• The process of installing a new operating system deletes all the data on your storage drive, including the
data that were stored in a hidden folder.
• If your computer is equipped with both a hard disk drive and an M.2 solid-state drive, do not use the
M.2 solid-state drive as a bootable device. The M.2 solid-state drive is used for “cache” function and to
support the Intel Rapid Start Technology.
To install the Windows 8.1 operating system, do the following:

1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 67.
2. Select Startup ➙ Boot to display the Boot Priority Order submenu.
3. Select the drive that contains the Windows 8.1 operating system installation program, for example
USB HDD.
4. Press the F10 key to exit the ThinkPad Setup program.
5. Connect the drive that contains the Windows 8.1 operating system installation program to the computer,
and restart the computer.
6. Install the Windows 8.1 fix modules. Go to the Microsoft Knowledge Base home page at
http://support.microsoft.com/. Type the number of the fix module in the search field, then click Search.
7. Install the registry patches. To download and install the registry patches, go to the Lenovo Support Web
site at:
66 User Guide
8. Install the device drivers. See “Installing device drivers” on page 67.
Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in the
ThinkPad Setup program. Otherwise, the operating system will not start correctly.
When you install the Windows 8.1 operating system, you might need one of the following country or region
codes:
Country or region Code Country or region Code

China SC Netherlands NL
Denmark DK Norway NO
Finland FI Spain SP
France FR Sweden SV
Germany GR Taiwan and Hong Kong TC
Italy IT United States US
Japan JP
Installing device drivers

Device driver is the program that operates a particular hardware device of the computer. If a device does
not perform well or you install a new device, you need to install or update the corresponding device driver.
For example, if you use the Windows 7 operating system, to use the USB 3.0 connector, you need to
download and install the USB 3.0 driver.
To download the latest device drivers, do the following:

1. Go to http://www.lenovo.com/ThinkPadDrivers.
2. Select your product name to view all the device drivers for your computer.
3. Select the device drivers that you need, and follow the instructions on the screen.
Attention: Do not download the device drivers from the Windows Update Web. Always download the device
drivers from:
http://www.lenovo.com/ThinkPadDrivers
If you use the Windows 7 operating system, you also can find the device drivers in the C:\SWTOOLS\DRIVERS
directory on your storage drive. For more information, see “Reinstalling preinstalled applications and device
drivers” on page 107.
Using the ThinkPad Setup program

The ThinkPad Setup program enables you to select various setup configurations for your computer through
configuring the BIOS.
To configure the BIOS of your computer, do the following:
Note: Depending on the operating system you are using, some menu items listed in this chapter might not
be available on your computer, and some menu items might be slightly different from the actual menu items
displayed on your computer.
1. Restart the computer. When the logo is displayed, press F1. The ThinkPad Setup program starts.
Note: If you are required to enter the supervisor password, enter the correct password. You also can
press Enter to skip the password prompt and start the ThinkPad Setup program. If you do not enter the
Chapter 5. Advanced configuration 67

password, you cannot change the configurations that are protected by the supervisor password. For
more information, refer to “Using passwords” on page 57.
2. Use the pointer keys to select a tab; or use the pointer keys to locate an item and press Enter to select
it. Then a submenu is displayed.
Note: Some menu items are displayed only if the computer supports the corresponding features.
3. Set the value of an item by doing one of the following:
• Press the F6 key to change to a higher value.
• Press the F5 key to change to a lower value.
Note: Default values are in boldface.

4. To change other configurations, press the Esc key to exit the submenu and return to the parent menu.
5. When you complete the configuration, press the F10 key to save and exit. You also can select the
Restart tab in the ThinkPad Setup menu, and restart your computer with one of the provided options.
Note: You can press the F9 key to restore to the default settings.
Main menu
When you enter the ThinkPad Setup program, you will first see the Main menu as follows:
• UEFI BIOS Version
• UEFI BIOS Date
• Embedded Controller Version
• ME Firmware Version
• Machine Type Model
• System-unit serial number
• System board serial number
• Asset Tag
• CPU Type
• CPU Speed
• Installed memory
• UUID
• Preinstalled OS License
• UEFI Secure Boot
• OA3 ID
• OA 2
Config menu
To change the configuration of your computer, select Config tab from the ThinkPad Setup menu.
The following table lists the Config menu items. Default values are in boldface.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
68 User Guide
Table 3. Config menu items
Menu item Submenu item Selection Comments
USB USB UEFI BIOS Support • Disabled Enable or disable boot support
• Enabled from USB storage devices.
Always On USB • Disabled If you select Enabled, the

• Enabled external USB devices can
be charged through USB
connectors even when the
computer is in low-power mode
(sleep, hibernate, or power-off).
If the system runs in battery
mode, this function will work only
in sleep state.
If you select Enabled, USB wake

up function is not supported on
Always On USB connector.
Always On USB • Disabled Note: This item is available only
- Charge in Battery Mode • Enabled when the Always On USB is set
as Enabled.
Enable or disable the function of

charging external devices when
your computer is in hibernation
mode or is turned off without
connecting to ac power.
If you select Enabled, the

external USB devices can
be charged through USB
connectors even when system is
in hibernation or power-off mode
and in battery mode.
USB 3.0 Mode • Disabled Set the USB 3.0 controller
• Enabled mode for the connectors shared
between USB 2.0 and USB 3.0
• Auto controllers.
If you select Auto, it will enable

you to connect and route
appropriate USB 3.0 or USB 2.0
connectors.
If you select Enabled, it will

enable the USB 3.0 mode
and allow the USB 3.0 to be
supported in the Windows 7 and
Windows 8.1 operating systems.
If you select Disabled, it will

disable and hide the USB 3.0
controller, and the USB 3.0
connectors will work as USB 2.0
connectors.

Table 3. Config menu items (continued)
Keyboard/Mouse TrackPoint • Disabled Enables or disables built-in
• Enabled TrackPoint.
If you select Disabled, the

built-in TrackPoint is disabled.
If you select Enabled, the built-in

TrackPoint is enabled.
Trackpad • Disabled Enables or disables built-in
• Enabled Trackpad.

built-in Trackpad is disabled.
If you select Enabled, the built-in

Trackpad is enabled.
Fn and Ctrl Key swap • Disabled If you select Enabled, the Fn key
• Enabled will work as the Ctrl key, and the
Ctrl key will work as the Fn key.
Note: Even when Enabled is

selected, you need to press the
Fn key to resume the computer
from sleep mode to normal
operation.
Display Boot Display Device • ThinkPad LCD Select the display device that is
• HDMI to be activated at boot time. This
selection is effective for boot
• Display on dock time, password prompt, and
ThinkPad Setup.
HDMI is the HDMI on your

computer.
Display on dock is DVI, HDMI

or DP connector on a OneLink
dock.
Total Graphics Memory • 256 MB Allocate total memory which
• 512 Intel(R) internal graphics device
shares.
Note: If you select 512 MB, the

maximum usable memory may
be reduced on 32-bit OS.
Boot Time Extension • Disabled This option defines the amount of
• 1 second time to extend the boot process,
in seconds.
• 2 seconds
• 3 seconds The system cannot detect some
external monitors during boot
• 5 seconds
because the external monitors
• 10 seconds might need a few seconds to
be ready. Try this option if the
external monitor being used does
not display the boot screen.
70 User Guide
Power Intel(R)SpeedStep® • Disabled Enable or disable the Intel
technology • Enabled SpeedStep technology.
If you select Enabled, the

processor can work at lower
speed to save power.

processor always works at the
highest speed.
CPU Power Management • Enabled Enable or disable the
• Disabled power-saving feature that
stops the microprocessor clock
automatically when there are no
computer activities. Normally, it
is not necessary to change the
setting.
Intel (R) Rapid Start • Enabled Enable or disable Intel (R) Rapid
Technology • Disabled Start Technology. To use this
feature, a special partition on the
Enter after: solid state drive is required.
• Immediately If you select Enabled, the system

• 1 minute enters a lower power state after
the specified time in Sleep state.
• 2 minutes If you select disabled, Sleep
• 5 minutes state is used.
• 10 minutes
• 15 minutes
• 30 minutes
• 1 hour
• 2 hours
• 3 hours
Disable Built-in Battery Use this feature to temporarily
disable the built-in battery. The
system will be automatically
powered off after you select this
item. Then the computer is ready
to be serviced.
Note: The ac power adapter

must be disconnected to perform
this operation. The built-in
battery will be automatically
enabled when the ac power
adapter is reconnected.

Beep and Alarm Password Beep • Disabled Enable this option to have a
• Enabled beep sound when the system
is waiting for a power-on, hard
disk, or supervisor password.
Different beeps will be sounded
when the entered password
matches or does not match the
configured password.
Keyboard Beep • Disabled Enable or disable the keyboard
• Enabled beep when unmanageable key
combinations are pressed.
Date and Time menu

To change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu.
Then do the following:
1. Use the pointer keys to select System Date or System Time.
2. Type a date or time.
Security menu
To change the security settings of your computer, select the Security tab from the ThinkPad Setup menu.
The following table lists the Security menu items. Default values are in boldface.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
Table 4. Security menu items

Password Supervisor Password • Disabled Refer to “Supervisor password” on
• Enabled page 58.
Lock UEFI BIOS Settings • Disabled Enable or disable the function that
• Enabled protects items in the ThinkPad
Setup program from being changed
by unauthorized users. By default,
this is set to Disabled. If you set
the supervisor password and enable
this function, no one but you can
change the items in the ThinkPad
Setup program.
Password at Unattended • Disabled If you select and enable Password
Boot • Enabled at unattended boot, a password
prompt will be displayed when
the computer is turned on, from
either a power-off or hibernation
state. If you select Disabled, no
password prompt will be displayed;
the computer goes ahead and loads
the operating system. To prevent
unauthorized access, you can set
72 User Guide
Table 4. Security menu items (continued)
the user authentication on the
operating system.
Password at Restart • Disabled If you select and enable Password
• Enabled at restart, a password prompt will
be displayed when you restart the
computer. If you select Disabled, no
password prompt will be displayed;
the computer goes ahead and loads
the operating system. To prevent
unauthorized access, you can set
the user authentication on the
operating system.
Password at Boot Device • Disabled Select Enabled to prompt for the
List • Enabled Security password. Select Disabled
to proceed without any user action
required.
Password Count • Disabled Select Enabled to show the POST
Exceeded Error • Enabled 0199 error and prompt for the
Security password. Select Disabled
to hide the POST 0199 error and
proceed without any user action
needed.
Set Minimum Length • Disabled Specify a minimum length for
• x characters power-on password and hard disk
passwords. If you set the supervisor
(4≤x≤12) password and specify a minimum
length for passwords, no one but
you can change the length.
Power-On Password • Disabled Refer to “Power-on password” on
Hard Disk1 Password • Disabled Refer to “Hard disk passwords” on

Hard Disk2 Password • Disabled Refer to “Hard disk passwords” on

Note: This item is available when

your computer is equipped with an
M.2 solid-state drive.
Security Chip Security Chip • Active If you select Active, the security
• Inactive chip will be functional. If you select
Inactive, the Security Chip option
• Disabled will be visible, but the security chip
will not be functional. If you select
Disabled, the Security Chip option
will be hidden and the security chip
will not be functional.
Security Reporting Enable or disable the following
Options security reporting options:
• BIOS ROM Strings Reporting:
BIOS text string.
• SMBIOS Reporting: SMBIOS
data.

CMOS Reporting and NVRAM

Reporting are always enabled to
enhance system security.

Security Chip is set as Active.
Clear Security Chip Enter This option is used to clear
encryption keys. It will
not be possible to access
already-encrypted data after
these keys are cleared.

Security Chip is set as Active.
Physical Presence for • Disabled This option enables or disables the
Provisioning • Enabled confirmation message when you
change the settings of the security
chip.
Physical Presence for • Disabled This option enables or disables the
Clear • Enabled confirmation message when you
clear the security chip.
UEFI BIOS Update Option Flash BIOS Updating by • Disabled If you select Enabled, all users can
End-Users • Enabled update the UEFI BIOS. If you select
Disabled, only the person who
knows the supervisor password can
update the UEFI BIOS.
Secure RollBack • Disabled If you select Disabled, you can flash
Prevention • Enabled to an earlier version of the UEFI
BIOS.
If you select Enabled, you cannot

flash to an earlier version of the UEFI
BIOS.
Note: This item is set as Disabled

by default when the OS Optimized
Defaults on the Restart menu is
set as Disabled. This item is set
as Enabled by default when the
OS Optimized Defaults is set as
Enabled.
Memory Protection Execution Prevention • Disabled Some computer viruses and worms
• Enabled cause memory buffers to overflow.
By selecting Enabled you can
protect your computer against
attacks by such viruses and worms.
If you find that an application
program does not run correctly after
choosing Enabled, select Disabled
and reset the setting.
74 User Guide
Virtualization Intel(R) Virtualization • Disabled If you select Enabled, a Virtual
Technology • Enabled Machine Monitor (VMM) can utilize
the additional hardware capabilities
provided by Intel Virtualization
Technology.
Intel(R) VT-d Feature • Disabled Intel VT-d stands for Intel
• Enabled Virtualization Technology for
directed I/O. When enabled, a VMM
can utilize the platform infrastructure
for I/O virtualization.

the processor of your computer
supports this feature.
I/O Port Access Wireless LAN • Disabled If you select Enabled, you can use
• Enabled the Wireless LAN device.
Wireless WAN • Disabled If you select Enabled, you can use

• Enabled the Wireless WAN device.
Note: This item is displayed when

your computer is equipped with an
Wireless WAN device.
Bluetooth • Disabled If you select Enabled, you can use
• Enabled the Bluetooth device.
USB Port • Disabled If you select Enabled, you can use

• Enabled the USB connectors.
Memory Card Slot • Disabled If you select Enabled, you can use
• Enabled the memory card slot for an SD card
or a MultiMediaCard.
Integrated Camera • Disabled If you select Enabled, you can use
• Enabled the camera.
Microphone • Disabled If you select Enabled, you can use

• Enabled the microphone (internal, external,
or line-in).
Anti-Theft Computrace • Enabled Enable or disable the UEFI BIOS
• Disabled interface to activate the computrace
feature. The computrace feature
• Permanently enables you to track and secure
Disabled your computer.
Note: If you set the Computrace

item as Permanently Disabled, it
cannot be enabled again.

Secure Boot Secure Boot • Disabled Enable or disable the Secure Boot
• Enabled feature.
If you enable the Secure Boot,

the following item settings on the
Startup menu also will change
automatically:
1. The UEFI/Legacy Boot setting
will change to UEFI Only.
2. The CSM Support setting will
change to No.
Select Enable to prevent

unauthorized operating systems
from running at boot time.
Select Disabled to allow any

operating systems to run at boot
time.
Note: This item is set as Disabled

by default when the OS Optimized
Defaults on the Restart menu is
set as Disabled. This item is set
as Enabled by default when the
OS Optimized Defaults is set as
Enabled.
Platform Mode • User Mode Specify the system operating mode.
• Setup Mode
Secure Boot Mode • Standard Mode Specify the Secure Boot mode.
• Custom Mode
Reset to Setup Mode Enter This option is used to clear the
current platform key and put the
system into setup mode. You can
install your own platform key and
customize the Secure Boot signature
databases in setup mode. Secure
Boot mode will be set to custom
mode.
Restore Factory keys Enter This option is used to restore all
keys and certificates in Secure Boot
databases to factory defaults. Any
customized Secure Boot settings will
be erased, and the default platform
key will be re-established along with
the original signature databases
including certificate for Windows 8.1
operating system.
Clear All Secure Boot Enter This option is used to clear all keys
Keys and certificates in Secure Boot
databases. You can install your own
keys and certificates after selecting
this option.
76 User Guide
Startup menu
To change the startup settings of your computer, select the Startup tab from the ThinkPad Setup menu.
Attention:
• After you change the startup sequence, ensure that you select a correct device during a copy, a save, or a
format operation. Otherwise your data might be erased or overwritten.
• If you are using the BitLocker drive encryption, do not change the startup sequence. BitLocker drive
encryption locks the computer from starting once detects the change of startup sequence.
To change the startup sequence temporarily so that the computer starts from a desired drive, do the following:
1. Restart the computer. When the ThinkPad logo is displayed, press F12.
2. Select the device that you want the computer to start from.
Note: The Boot menu will be displayed if the computer cannot start from any devices, or the operating
system cannot be found.
The following table lists the Startup menu items. Default values are in boldface.
Note: Some items are displayed on the menu only if the computer supports the corresponding features.
Table 5. Startup menu items

Menu item Selection Comments
Boot Select the boot device when you
press the power button to turn on the
computer.
UEFI/Legacy Boot • Both Select system boot capability.
– UEFI/Legacy Boot Priority • Both: The system boots by the
following UEFI/Legacy Boot Priority
– UEFI First
setting.
– Legacy First
• UEFI Only: The system boots from
• UEFI Only the UEFI enabled operating system.
• Legacy Only • Legacy Only: The system boots from
any operating system other than the
CSM Support (for UEFI Only) UEFI enabled one.
• Yes Note: If you select UEFI Only, the

system cannot boot from the bootable
• No devices that do not have the UEFI
enabled operating system.
Compatibility Support Module (CSM) is

required for booting the legacy operating
system. If you select UEFI Only, CSM
Support will be selectable. For Both or
Legacy Only mood, CSM Support will
not be selectable.
Note: The Both and the CSM Support

selections are available when theOS
Optimized Defaults on the Restart
menu is set as Disabled, the UEFI
Only selection is available when theOS
Optimized Defaults on the Restart
menu is set as Enabled.

Table 5. Startup menu items (continued)
Menu item Selection Comments
Boot Mode • Quick Quick: The diagnostic splash screen will
• Diagnostics not be displayed unless you press Esc
during starting the system.
Diagnostics: The diagnostic splash

screen is always displayed during
starting the system.
Option Key Display • Enabled If you select Disabled, the To interrupt
• Disabled normal startup, press Enter. message is
not displayed during the POST.
Boot Device List F12 Option • Enabled If you select Enabled, the F12 key is
• Disabled recognized and the Boot Menu window
is displayed.
Note: Only the person who knows the

supervisor password can change the
setting of this option.
Boot Order Lock • Disabled If you select Enabled, the boot priority
• Enabled order is locked for your future use.
Restart menu
To exit the ThinkPad Setup program and restart the computer, select Restart from the ThinkPad Setup menu.
The following submenu items are displayed:

• Exit Saving Changes: Save the changes and restart the computer.
• Exit Discarding Changes: Discard the changes and restart the computer.
Note: The changes of the following submenu items will not be discarded and can be reset in ThinkPad
Setup menu:
– Date & Time
• Load Setup Defaults: Restore to the factory default settings.
Note: Enable OS Optimized Defaults to meet the Windows 8.1 certification requirements. When you
change this setting, some other settings are changed automatically, such as CSM Support, UEFI/Legacy
Boot, Secure Boot, and Secure RollBack Prevention. Ensure that you do not enable the OS Optimized
Defaults if your computer is only installed with the Windows 7 operating system.
• Discard Changes: Discard the changes.
Note: The changes of the following submenu items will not be discarded and can be reset in ThinkPad
Setup menu:
– Date & Time
– Supervisor password
– Power-on password
– Hard disk password
• Save Changes: Save the changes.
78 User Guide
Updating the UEFI BIOS
The UEFI BIOS is the first program that the computer runs when the computer is turned on. The UEFI BIOS
initializes the hardware components, and loads the operating system and other programs.
You can update the UEFI BIOS by starting your computer from a flash update optical disc or a flash update
program running in the Windows environment. When you install a new program, a device driver, or hardware,
you might be informed to update the UEFI BIOS.
For instructions on how to update the UEFI BIOS, go to:

http://www.lenovo.com/ThinkPadDrivers
Using system management

This topic is primarily intended for the network administrators.
Your computer is designed for manageability, so that you can redirect more resources to better meet
your business objectives.
This manageability, known as Total Cost of Ownership (TCO), enables you to remotely operate client
computers in the same way as you operate your own computer, such as turning on a client computer,
formatting a hard disk drive or hybrid drive, and installing a program.
Once the computer is configured and operational, you can manage it by using the software and the
manageability features that are already integrated into the client computer and the network.
Desktop Management Interface

The UEFI BIOS of your computer supports an interface called System Management BIOS (SMBIOS)
Reference Specification, version 2.7.1. SMBIOS provides information about the hardware components of
your computer. It is the responsibility of the UEFI BIOS to provide information about itself and the devices on
the system board. This specification documents the standards for getting access to this BIOS information.
Preboot eXecution Environment

The Preboot eXecution Environment (PXE) technology makes the computer more manageable by enabling the
computer to start from a server. Your computer supports the personal computer functions that PXE requires.
For example, with a ThinkPad USB 3.0 Ethernet Adapter, your computer can be started from the PXE server.
Note: The Remote Initial Program Load (RIPL or RPL) function cannot be used with your computer.
Asset ID EEPROM
The Asset ID EEPROM contains information about the computer configuration and the serial numbers of
the key components. It also includes a number of blank fields where you can record information about
the end users in your network.

80 User Guide
Chapter 6. Preventing problems
An important part of owning a ThinkPad notebook computer is maintenance. With proper care, you can
avoid common problems. The chapter provides information that can help you keep your computer running
smoothly.
• “General tips for preventing problems” on page 81
• “Making sure device drivers are current” on page 82
• “Taking care of your computer” on page 83
General tips for preventing problems

This topic provides the following tips to help you prevent computing problems:
• If your computer is equipped with both a hard disk drive and an M.2 solid-state drive, you are not
recommended to use the M.2 solid-state drive as a bootable device. The M.2 solid-state drive is designed
and developed for “cache” function purpose only. If you use the M.2 solid-state drive as a bootable
device, its reliability is not guaranteed.
• Check the capacity of your hard disk drive or hybrid drive from time to time. If the hard disk drive or hybrid
drive gets too full, the Windows operating system will slow down and might produce errors.
To check the hard disk drive or hybrid drive capacity, do the following:
– For Windows 7: Click Start ➙ Computer.
– For Windows 8.1: Open the File Explorer.
• Empty your recycle bin on a regular basis.
• Use disk defragment tool regularly on your hard disk drive or hybrid drive to improve data seek and
read times.
• To free up disk space, uninstall unused application programs.
Note: You also might want to look for program duplication or overlapping versions.
• Clean out your Inbox, Sent, and Trash folders from your e-mail client program.
• Back up your data at least once a week. If critical data is present, it is a good idea to perform a daily
backup operation. Lenovo has many backup options available for your computer. Rewritable optical
drives are available for most machines and are easily installed.
• Schedule system restore operations to take a system snapshot periodically. For more information about
system restore, see Chapter 8 “Recovery overview” on page 103.
• Update device drivers and the UEFI BIOS when needed.
• Profile your machine at http://www.lenovo.com/support to keep up to date with current drivers and
revisions.
• Keep up to date for device drivers on other non-Lenovo hardware. You might want to read the device
driver information release notes prior to updating for compatibility or known issues.
• Keep a log book. Entries might include major hardware or software changes, driver updates, minor issues
you have experienced, and how you resolved the minor issues.
• If you ever need to run a recovery on your computer to return the preinstalled contents onto the machine,
the following tips might help along the way:
– Remove all external devices such as the printer, keyboard, and so on.
– Make sure that your battery is charged and your computer has the ac power connected.

– Access ThinkPad Setup and load the default settings.
– Restart the computer and start the recovery operation.
– If your computer uses discs as the recovery media, do not remove the disc from the drive until
prompted to do so.
• For suspected hard disk drive or hybrid drive issues, refer to “Diagnosing problems” on page 87 and run a
diagnostic test for the drive before you call the Customer Support Center. If your computer does not
start up, download the files to create a bootable self-test medium from http://www.lenovo.com/hddtest.
Run the test and record any messages or error codes. If the test returns any failing error codes or
messages, call the Customer Support Center with the codes or messages and the computer in front of
you. A technician will assist you further.
• If required, you can find the contact information about the Customer Support Center for your country
or region at http://www.lenovo.com/support/phone. When calling the Customer Support Center, make
sure that you have your machine model type, serial number, and the computer in front of you. Also, if the
computer is producing error codes, it is helpful to have the error screen on or the messages written down.
Making sure device drivers are current

Device drivers are programs that contain instructions for the operating system about how to operate or
“drive” a certain piece of hardware. Each hardware component on your computer has its own specific driver.
If you add a new component, the operating system needs to be instructed on how to operate that piece
of hardware. After you install the driver, the operating system can recognize the hardware component
and understand how to use it.
Note: Because drivers are programs, like any other file on your computer, they are susceptible to corruption
and might not perform correctly if corruption occurs.
It is not always necessary to download the latest drivers. However, you should download the latest driver
for a component if you notice poor performance from that component or if you added a new component.
This might eliminate the driver as the potential cause of a problem.
Getting the latest drivers from the Web site

You can download and install updated device drivers from the Lenovo Web site by doing the following:
1. Go to http://www.lenovo.com/ThinkPadDrivers.
2. Select the entry for your computer and then follow the instructions on the screen to download and
install necessary software.
Getting the latest drivers using System Update

The System Update program helps you keep the software on your computer up-to-date. Update packages
are stored on Lenovo servers and can be downloaded from the Lenovo Support Web site. Update packages
can contain applications, device drivers, UEFI BIOS flashes, or software updates. When the System Update
program connects to the Lenovo Support Web site, the System Update program automatically recognizes
the machine type and model of your computer, the installed operating system, and the language of the
operating system to determine what updates are available for your computer. The System Update program
then displays a list of update packages and categorizes each update as critical, recommended, or optional to
help you understand the importance. You have complete control of which updates to download and install.
After you select the update packages you want, the System Update program automatically downloads and
installs the updates without any further intervention from you.
The System Update program is preinstalled on your computer and is ready to run. The only prerequisite is
an active Internet connection. You can start the program manually, or you can use the schedule feature
to enable the program to search for updates automatically at specified intervals. You also can predefine
82 User Guide
scheduled updates to search by severity (critical updates, critical and recommended updates, or all updates)
so the list you choose from contains only those update types that are of interest to you.
For more information about how to use the System Update program, refer to the help information system
of the program.
Taking care of your computer

Although your computer is designed to function reliably in normal work environments, you need to use
common sense in handling it. By following the important tips in this topic, you will get the most use and
enjoyment out of your computer.
Be careful about where and how you work

• Store packing materials safely out of the reach of children to prevent the risk of suffocation from plastic
bags.
• Keep your computer away from magnets, activated cellular phones, electrical appliances, or speakers
(more than 13 cm or 5 inches).
• Avoid subjecting your computer to extreme temperatures (below 5°C/41°F or above 35°C/95°F).
• Some appliances, such as certain portable desktop fans or air purifiers, can produce negative ions. If a
computer is close to such an appliance, and is exposed for an extended time to air containing negative
ions, it might become electrostatically charged. Such a charge might be discharged through your hands
when you touch the keyboard or other parts of the computer, or through connectors on I/O devices
connected to the computer. Even though this kind of electrostatic discharge (ESD) is the opposite of a
discharge from your body or clothing to the computer, it poses the same risk of a computer malfunction.
Your computer is designed and manufactured to minimize any effects of electrostatic charge. An electrostatic
charge above a certain limit, however, can increase the risk of ESD. Therefore, when using the computer
close to an appliance that can produce negative ions, give special attention to the following:
• Avoid directly exposing your computer to the air from an appliance that can produce negative ions.
• Keep your computer and peripherals as far as possible from such an appliance.
• Wherever possible, ground your computer to facilitate safe electrostatic discharge.
Note: Not all such appliances cause a significant electrostatic charge.
Be gentle with your computer

• Avoid placing any objects (including paper) between the display and the keyboard or the palm rest.
• Do not turn your computer over while the ac power adapter is plugged in. This could break the adapter
plug.
Carry your computer properly

• Before moving your computer, be sure to remove any media, turn off attached devices, and disconnect
cords and cables.
• When picking up your open computer, hold it by the bottom. Do not pick up or hold your computer by
the display.
Handle storage media and drives properly

• When installing the storage drive, follow the instructions shipped with your hardware, and apply pressure
only where needed on the device.
• Turn off your computer before you replace the storage drive.
• After you replace the primary storage drive, reattach the cover of the drive slot.
Chapter 6. Preventing problems 83

• Store your external and removable hard disk drives or optical drives in appropriate containers or
packaging when they are not being used.
• Before you install a memory card such as an SD card, SDHC card, SDXC card, and a MultiMediaCard,
touch a metal table or a grounded metal object. This action reduces any static electricity from your
body. Static electricity could damage the device.
• When transferring data to or from a flash media card, such as an SD card, do not put your computer in
sleep or hibernation mode before the data transfer is complete; otherwise, your data could become
damaged.
Taking care in setting passwords

• Remember your passwords. If you forget a supervisor or hard disk password, Lenovo will not reset it, and
you might have to replace the system board or the storage drive.

• Register your ThinkPad computer with Lenovo at http://www.lenovo.com/register. For more information,
see “Registering your computer” on page 21.
Be sure not to modify your computer

• Only an authorized ThinkPad repair technician should disassemble and repair your computer.
• Do not modify or tape the latches to keep the display open or closed.
Cleaning the cover of your computer

Occasionally clean your computer by doing the following:
1. Prepare a mixture of a gentle kitchen-use detergent (one that does not contain abrasive powder or
strong chemicals such as acid or alkaline). Use 5 parts water to 1 part detergent.
2. Absorb the diluted detergent into a sponge.
3. Squeeze excess liquid from the sponge.
4. Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip.
5. Wipe the surface to remove the detergent.
6. Rinse the sponge with clean running water.
7. Wipe the cover with the clean sponge.
8. Wipe the surface again with a dry, soft, lint-free cloth.
9. Wait for the surface to dry completely and remove any fibers from the cloth.
Cleaning your computer keyboard

To clean the computer keyboard, do the following:
1. Apply some isopropyl rubbing alcohol to a soft, dust-free cloth.
Note: Avoid spraying cleaner directly onto the display or the keyboard.
2. Wipe each keytop surface with the cloth. Wipe the keys one by one; if you wipe several keys at a time,
the cloth might hook onto an adjacent key and possibly damage it. Ensure that no liquid drips onto
or between the keys.
3. Allow to dry.
4. To remove any crumbs or dust from beneath the keys, you can use a camera blower with a brush
or cool air from a hair dryer.
84 User Guide
Cleaning your computer display
To clean the computer display, do the following:
1. Gently wipe the display with a dry, soft lint-free cloth. If you see a scratchlike mark on your display, it
might be a stain transferred from the keyboard or the TrackPoint pointing stick when the cover was
pressed from the outside.
2. Wipe or dust the stain gently with a soft, dry cloth.
3. If the stain remains, moisten a soft, lint-free cloth with water or a 50-50 mixture of isopropyl alcohol and
water that does not contain impurities.
Note: Avoid spraying cleaner directly onto the display or the keyboard.
4. Wring out as much of the liquid as you can.
5. Wipe the display again; do not let any liquid drip into the computer.
6. Be sure to dry the display before closing it.
Chapter 6. Preventing problems 85

86 User Guide
Chapter 7. Troubleshooting computer problems
This chapter provides information on what to do if you experience a problem with your computer.

• “Diagnosing problems” on page 87
• “Troubleshooting” on page 87
Diagnosing problems
If you experience problems with your computer, use the Lenovo Solution Center program as a starting
point for solving them.
The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. It
combines diagnostic tests, system information collection, security status, and support information, along
with hints and tips for maximum system performance.
Notes:
• The Lenovo Solution Center program also is available for downloaded at:
http://www.lenovo.com/diags
• If you are using other Windows operating system rather than Windows 7 or Windows 8.1, you can find the
latest information about diagnostics for your computer at:
http://www.lenovo.com/diags
If your computer is installed with the Windows 7 operating system, when you are setting up your computer,
the Lenovo Solution Center program prompts you to create recovery media, which you can use to restore
the hard disk drive or hybrid drive to the factory default state. For more information, see “Creating and
using a recovery media” on page 103.
To run the Lenovo Solution Center program, see “Lenovo programs” on page 15.
For additional information, refer to the Lenovo Solution Center help system.
Note: If you are unable to isolate and repair the problem yourself after running the Lenovo Solution Center
program, save and print the log files created by the program. You will need the log files when you speak to a
Lenovo technical support representative.
Troubleshooting
If your computer has an error, it typically displays a message or an error code, or a beep sounds when
you turn it on. When you experience a problem, refer to the corresponding sections in this topic to try to
solve the problem by yourself.
Computer stops responding

Print these instructions now and keep the instructions with your computer for reference later.
If your computer is completely unresponsive (you cannot use the TrackPoint pointing device or the
keyboard), do the following:
1. Press and hold the power button for four seconds or more to turn off the computer, and then restart the
computer by pressing the power button.

Note: If you cannot turn off your computer, or if you cannot restart it, continue with step 2.
2. Remove the ac power adapter from the computer, and reset the system by inserting a straightened
paper clip into the emergency-reset hole. To locate the reset hole, refer to “Bottom view” on page 8.
Reattach the ac power adapter.
Notes:
a. If the computer does not turn on, continue with step 3.
b. If the computer starts with ac power but does not start when ac power is disconnected, call the
Customer Support Center for support. Go to http://www.lenovo.com/support/phone for the latest
list of support phone numbers for your country or region.
3. Remove all external devices that are attached to your computer (keyboard, mouse, printer, scanner,
and so on). Repeat step 2.
If the computer still does not start up, call the Customer Support Center and a Customer Support Specialist
will assist you.
Spills on the keyboard

With a mobile computer, there are increased chances of spilling liquids on the keyboard. Because most
liquids conduct electricity, liquid spilled on the keyboard could create numerous short circuits, potentially
causing irreparable damage to your computer.
If you spill something on your computer:
Attention: Ensure that no liquid creates a short circuit between you and the ac power adapter (if in use).
Although you might lose some data or work by turning off the computer immediately, leaving the computer
on might make your computer unusable.
1. Carefully unplug the ac power adapter immediately.
2. Turn off the computer immediately. The more quickly you stop the current from passing through the
computer the more likely you will reduce damage from short circuits.
3. Wait until you are certain that all the liquid is dry before turning on your computer.
Note: If you want to replace your keyboard, you can purchase a new one.
Error messages
• Message: 0177: Bad SVP data, stop POST task.
Solution: Checksum of the supervisor password in the EEPROM is not correct.
• Message: 0183: Bad CRC of Security Settings in EFI Variable. Enter ThinkPad Setup.
Solution: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Setup
to check the Security settings, Press F10 and then press Enter to restart the system. If you still have a
problem, have the computer serviced.
• Message: 0187: EAIA data access error.

Solution: The access to EEPROM is failed. Have the computer serviced.
• Message: 0188: Invalid RFID Serialization Information Area.

Solution: The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced,
and the box serial number needs to be reinstalled. Have the computer serviced.
• Message: 0189: Invalid RFID configuration information area.
88 User Guide
Solution: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replaced,
and the box serial number needs to be reinstalled. Have the computer serviced.
• Message: 0190: Critical low-battery error.

Solution: The computer turns off, because the battery is low. Connect the ac power adapter to the
computer and charge the battery.
• Message: 0191: System Security - Invalid remote change requested.

Solution: The system configuration change has failed. Confirm the operation and try again. To clear the
error, enter ThinkPad Setup.
• Message: 0199: System Security - Security password retry count exceeded.

Solution: This message is displayed if you enter a wrong supervisor password more than three times.
Confirm the supervisor password and try again. To clear the error, enter the ThinkPad Setup program.
• Message: 1802: Unauthorized network card is plugged in - Power off and remove the network card.
Solution: The wireless network card is not supported on this computer. Remove it.
• Message: 1820: More than one external fingerprint reader is attached. Power off and remove all but the
reader that you set up within your main operating system.
Solution: Remove all but the reader that you set up for the authentication.
• Message: 0251: System CMOS checksum bad.

Solution: The system CMOS might have been corrupted by an application program. The computer uses
the default settings. Run ThinkPad Setup to reconfigure the settings. If you still see the same error code,
have the computer serviced.
• Message: 0271: Real Time Clock Error - Check Date and Time settings.
Solution: Neither the date nor the time is set in the computer. Enter ThinkPad Setup to set the date and
time.
• Message: 2000: ThinkVantage Active Protection sensor diagnostics failed.

Solution: ThinkVantage® Active Protection sensor is not working correctly. Have the computer serviced.
• Message: 2100: Detection error on HDD0 (Main HDD).

Solution: The hard disk drive or hybrid drive is not working. Have the hard disk drive or hybrid drive
serviced.
• Message: 2101: Detection error on HDD1 (M.2)

Solution: Ultrabay hard disk drive is not initialized during post. Added from MFG request. Press Esc
key to continue.
• Message: 2110: Read error on HDD0 (Main HDD)

Solution: The main hard disk drive or hybrid drive is not working. Have the main hard disk drive or
hybrid drive serviced.
• Message: 2111: Read error on HDD1 (M.2)

Solution: Ultrabay hard disk drive is not initialized during post. Added from MFG request. Press Esc
key to continue.
• Message: 2200: Machine Type and Serial Number are invalid.
Chapter 7. Troubleshooting computer problems 89

Solution: Machine Type and Serial Number are invalid. Have the computer serviced.
• Message: 2201: Machine UUID is invalid.

Solution: Machine UUID is invalid. Have the computer serviced.
• Message: Fan error

Solution: Cooling fan has failed. Shut down the computer immediately and have the computer serviced.
• Message: Thermal sensing error

Solution: The thermal sensor is not functioning correctly. Shut down the computer immediately and
• Message: This system does not support batteries that are not genuine Lenovo-made or authorized. The
system will continue to boot, but may not charge unauthorized batteries.
Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out of their use.
Solution: Unauthorized battery is connected to the system. Replace the battery with the correct Lenovo
battery. If you still see the same error message, contact Lenovo for help.
Errors without messages

• Problem: My screen keeps blanking when I do not want it to.
Solution:
– If your computer is preinstalled with the Windows 7 operating system, you can disable any system
timers, such as the LCD turn-off timer or the blank timer by doing the following:
1. Start Power Manager.
2. Click the Power plan tab, and then select Maximum Performance from the predefined power
plans.
– If your computer is preinstalled with the Windows 8.1 operating system, doing the following:
1. Go the desktop and click the battery-status icon in the windows notification area.
2. Click More power options ➙ Show additional plans ➙ High performance.
• Problem: When I turn on the computer, nothing is displayed on the screen and the computer does not
beep while starting up.
Note: If you are not sure whether you heard any beeps, turn off the computer by pressing and holding the
power button for four seconds or more. Turn it on and listen again.
Solution: Ensure that:
– The battery is installed correctly.
– The ac power adapter is connected to the computer and the power cord is plugged into a working
electrical outlet.
– The computer is turned on. (Turn the power button on again for confirmation.)
If a power-on password is set:
– Press any key to display the prompt for the power-on password. If the brightness level of the screen is
low, increase it by pressing the brightness-up key .
– Type the correct password and press Enter.
If these items are correctly set, and the screen remains blank, have the computer serviced.
90 User Guide
• Problem: When I turn on the computer, only a white pointer is displayed on a blank screen.
Solution: If you have modified a partition on your hard disk drive or hybrid drive by using partition
software, information about that partition, or the master boot record might have been destroyed.
1. Turn off the computer, and then turn it on again.
2. If you still see only the pointer on the screen, do the following:
– If you have used the partition software, examine the partition on the hard disk drive or hybrid drive
by using the software, and recover the partition if required.
– If your system is installed with the Windows 8.1 operating system, use either the Remove
everything and reinstall Windows function or the recovery discs to restore the system to the
factory state.
If the problem persists, have the computer serviced.
• Problem: My screen goes blank while the computer is on.

Solution: Your screen saver or power management might have been enabled. Do either of the following:
– Touch the TrackPoint pointing device or the trackpad, or press a key to exit the screen saver.
– Press the power button to resume from sleep or hibernation.
Beep errors
Table 6. Beep errors
Problem Solution
One short beep, pause, three short beeps, pause, three Memory problem. Shut down the computer immediately
more short beeps, and one short beep and have the computer serviced.
Three short beeps, pause, one short beep, pause, one PCI resource problem. Shut down the computer
more short beep, and three short beeps immediately and have the computer serviced.
One long and two short beeps Video problem. Shut down the computer immediately and
Four cycles of four short beeps TCG*-compliant functionality-related problem (might
be the BIOS code validation failure). Shut down the
computer immediately and have the computer serviced.
* TCG is the abbreviation for Trusted Computing Group.
Five short beeps System board problem. Shut down the computer
immediately and have the computer serviced.
Five short beeps, pause, five short beeps, and pause TCG-compliant functionality-related problem (might be
the TPM initialization failure). Continue with the boot
process and call the Lenovo service center for technical
support.
Memory module problems

If your memory module is not operating properly, check the following items:
1. Check for error messages during startup.
Follow the appropriate corrective actions for power-on self-test (POST) error messages.
2. Verify that the latest UEFI BIOS for your model has been installed.
3. Verify the proper memory configuration and compatibility including the maximum memory size and the
memory speed.

4. Run the Lenovo Solution Center program.
Networking problems
The following are the most common networking problems.
Ethernet problems
• Problem: The computer cannot connect to the network.
Solution: Make sure that:
– The ThinkPad USB 3.0 Ethernet Adapter or the supported dock is connected correctly to your computer.
– The cable is installed correctly.
The network cable must be securely connected to the RJ45 connector of the supported dock or to the
ThinkPad USB 3.0 Ethernet Adapter (if available). The maximum allowable distance from the computer
to the hub is 100 meters (328 feet). If the cable is connected and the distance is within the limit
but the problem persists, try a different cable.
– You are using the correct device driver. To install the correct driver, do the following:
1. Open Control Panel and click Hardware and Sound ➙ Device Manager. If you are prompted for
an administrator password or confirmation, type the password or provide confirmation.
2. If the exclamation mark ! is displayed next to the adapter name under Network adapters, you
might not be using the correct driver or the driver might have been disabled. To update the driver,
right-click the highlighted adapter.
3. Click Update Driver Software, and then follow the instructions on the screen.
– The switch connector and the adapter have the same duplex setting.
If you configured the adapter for full duplex, make sure that the switch connector also is configured
for full duplex. Setting wrong duplex mode can degrade performance, cause data loss, or result in
lost connections.
– You have installed all networking software that is necessary for your network environment.
Check with your LAN administrator for the necessary networking software.
• Problem: The adapter stops working for no apparent reason.

Solution: The network driver files might be corrupt or missing. Update the driver by referring to the
previous solution for the procedure to make sure that the correct device driver is installed.
• Problem: My computer is a Gigabit Ethernet model and I use a speed of 1000 Mbps, but the connection
fails or errors occur.
Solution:
– Use Category 5 wiring and make sure that the network cable is securely connected.
– Connect to a 1000 BASE-T hub/switch (not 1000 BASE-X).
• Problem: My computer is a Gigabit Ethernet model, but the computer cannot connect to the network at
1000 Mbps. Instead, it connects at 100 Mbps.
Solution:
– Try another cable.
– Make sure that the link partner is set to auto-negotiate.
– Make sure that the switch is 802.3ab-compliant (gigabit over copper).
92 User Guide
A wireless LAN problem
Problem: I cannot connect to the network using the built-in wireless network card.
Solution: Make sure that:

• Your wireless LAN driver is the latest version.
• Your computer is within range of a wireless access point.
• The wireless radio is enabled.
Note: If you are using the Windows 7 operating system, click Show hidden icons on the windows notification
area. The Access Connections icon is displayed. For more information about the icon, refer to the Access
Connections help information system.
For the Windows 7 operating system, check the Network Name (SSID) and your encryption information. Use
the Access Connections program to verify this case-sensitive information.
A wireless WAN problem

Problem: A message is displayed indicating that an unauthorized wireless WAN card is installed.
Solution: The wireless WAN card is not supported on this computer. Remove the wireless WAN card.
Note: Some models do not have a wireless WAN card.
Bluetooth problems
Note: Check your connection anytime and make sure that no other Bluetooth-enabled device is searching for
the device to which you want to connect. Simultaneous searching is not allowed in the Bluetooth connection.
• Problem: Sound does not come from the Bluetooth headset/headphone but comes from the local
speaker even though the Bluetooth headset/headphone is connected using a Headset profile or AV profile.
Solution: Do the following:
1. Exit the application that uses the sound device (for example, Windows Media Player).
2. Open Control Panel and click Hardware and Sound ➙ Sound ➙ Playback.
3. If you are using a Headset profile, select Bluetooth Hands-free Audio and click the Set Default
button. If you are using an AV profile, select Stereo Audio and click the Set Default button.
4. Click OK to close the Sound window.
• Problem: PIM items sent from the Windows 7 operating systems cannot be received correctly into the
address book of any other Bluetooth-enabled device.
Solution: The Windows 7 operating system sends PIM items in XML format, but most Bluetooth-enabled
devices handle PIM items in vCard format. If another Bluetooth-enabled device can receive a file through
Bluetooth, a PIM item sent from the Windows 7 might be saved as a file with the extension .contact.
Problems with the keyboard and other pointing devices

The following are the most common problems with keyboards and other pointing devices.
TrackPoint pointing device problems

• Problem: The pointer drifts when the computer is turned on or after it resumes normal operation.
Solution: The pointer might drift when you are not using the TrackPoint pointing device during normal
operation. This is a normal characteristic of the TrackPoint pointing device and is not a defect. Pointer
drifting might occur for several seconds under the following conditions:
– When the computer is turned on

– When the computer resumes normal operation
– When the TrackPoint pointing device is kept pressed for a long time
– When the temperature changes
• Problem: The TrackPoint pointing device or trackpad does not work.

Solution: Ensure that the TrackPoint pointing device or trackpad is enabled in the ThinkPad pointing
device setting window.
Keyboard problems
• Problem: All or some keys on the keyboard do not work.
Solution: If an external numeric keypad is connected:
1. Turn off the computer.
2. Remove the external numeric keypad.
3. Turn on the computer and try using the keyboard again.
If the keyboard problem is resolved, carefully reconnect the external numeric keypad and the external
keyboard. Ensure that you have seated the connectors correctly.
If the problem persists, ensure that the correct device driver is installed by doing the following:
1. Open Control Panel. Change the view of Control Panel from Category to Large icons or Small icons.
2. Click Keyboard.
3. Select the Hardware tab. In the Device Properties pane, ensure that you see this message: Device
Status: This device is working properly.
If keys on the keyboard still do not work, have the computer serviced.
• Problem: All or some keys on the external numeric keypad do not work.
Solution: Ensure that the external numeric keypad is correctly connected to the computer.
Problems with the display and multimedia devices

This topic includes the most common problems with displays and multimedia devices, including the
computer display, the external monitor, and audio devices.
Computer screen problems

• Problem: The screen is blank.
– Press the display mode-switching key to bring up the image.

– If you are using the ac power adapter, or using the battery and the battery gauge shows that the battery
is not depleted, press the brightness-up key to make the screen brighter.
– If your computer is in sleep mode, press Fn to resume from the sleep mode.
– If the problem persists, follow the solution for the following problem.
• Problem: The screen is unreadable or distorted.

– The display device driver is installed correctly.
– The screen resolution and color quality are correctly set.
– The monitor type is correct.
94 User Guide
To check these settings, do the following:
1. Right-click anywhere on the desktop, and click Screen resolution.
2. Click Advanced Settings.
3. Click the Adapter tab to ensure that the correct device driver name is shown in the Adapter
Information window. Then click the Properties button. If you are prompted for an administrator
password or confirmation, type the password or provide confirmation. Check the Device status box
and make sure that the device is working correctly. If the device is not working correctly, click the
Troubleshoot button and follow the instructions on the screen.
Note: The device driver name depends on the video chip that has been installed on your computer.
4. Click the Monitor tab to ensure that the correct monitor type is shown in the Monitor Type window.
Then click the Properties button. If you are prompted for an administrator password or confirmation,
type the password or provide confirmation. Check the Device status box and make sure that the
device is working correctly. If the device is not working correctly, click the Troubleshoot button and
Note: The device driver name depends on the video chip that has been installed on your computer.
5. Click the Colour Management tab, and then click the Colour Management button. In the displayed
Colour Management window, click the Advanced tab and ensure that the settings in the Windows
Colour System Defaults area are set as desired. If you are prompted for an administrator password
or confirmation, type the password or provide confirmation.
• Problem: Incorrect characters are displayed on the screen.

Solution: Did you install the operating system or application program correctly? If they are installed and
configured correctly, have the computer serviced.
• Problem: The screen stays on even after you turn off your computer.
Solution: Press and hold the power button for four seconds or more to turn off your computer; then
turn it on again.
• Problem: Missing, discolored, or bright dots appear on the screen every time you turn on your computer.
Solution: This is an intrinsic characteristic of the TFT technology. Your computer display contains
multiple thin-film transistors (TFTs). A small number of missing, discolored, or bright dots on the screen
might exist all the time.
External monitor problems

• Problem: The external monitor is blank.
Solution: To bring up the image, press the display mode-switching key and select the desired
monitor. If the problem persists, do the following:
1. Connect the external monitor to another computer to ensure that it works.
2. Reconnect the external monitor to your computer.
3. Refer to the manual shipped with the external monitor to check the resolutions and refresh rates that
are supported.
– If the external monitor supports the same resolution as the computer display or a higher resolution,
view output on the external monitor or on both the external monitor and the computer display.
– If the external monitor supports a lower resolution than the computer display, view output on the
external monitor only. (If you view output on both the computer display and the external monitor,
the external monitor screen will be blank or distorted.)
• Problem: You cannot set a higher resolution than the present one on your external monitor.

Solution: Make sure that the monitor type and other information is correct. If necessary, update the
monitor driver. See “Using an external display” on page 48.
• Problem: The screen is unreadable or distorted.

– The monitor information is correct and the appropriate monitor type is selected. Refer to the solution
to the above problem.
– Ensure that an appropriate refresh rate is selected by doing the following:
1. Connect the external monitor to the monitor connector, and then connect the monitor to an
electrical outlet.
2. Turn on the external monitor and the computer.
3. Right-click on the desktop, and click Screen resolution.
Note: If your computer cannot detect the external monitor, click the Detect button.
4. Click the icon for the desired monitor (the Monitor-2 icon is for the external monitor).
5. Click Advanced Settings.
6. Click the Monitor tab.
7. Select the correct screen refresh rate.
• Problem: Wrong characters are displayed on the screen.

Solution: Did you follow the correct procedure when installing the operating system or application
program? If you did, have the external monitor serviced.
• Problem: The Extend desktop function does not work.

Solution: Enable the Extend desktop function by doing the following:
1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical
outlet.
2. Turn on the external monitor and the computer.
3. Right-click on the desktop, and click Screen resolution.
4. Click the Monitor-2 icon.
5. Select Extend these displays for multiple displays.
6. Click the Monitor-1 icon (for the primary display, the computer display).
7. Set the resolution for the primary display.
8. Click the Monitor-2 icon (for the external monitor).
9. Set the screen resolution for the secondary display.
10. Set the relative position of each monitor by dragging its icon. You can set the monitors in any relative
position, but the icons must touch each other.
11. Click OK to apply the changes.
Note: To change the color settings, right-click on the desktop, and click Screen resolution. Click
Advanced Settings, select the Monitor tab, then set Colors.
• Problem: If you use the Extend desktop function, you cannot set a higher resolution or higher refresh
rate on the secondary display.
Solution: Change the resolution and the color depth to lower settings for the primary display. Refer
to the solution to the above problem.
96 User Guide
• Problem: Display switching does not work.
Solution: If you use the Extend desktop function, disable it, and change the display output location. If
a DVD movie or a video clip is playing, stop the playback, close the application, and then change the
display output location.
• Problem: The screen position on the external monitor is incorrect when that monitor is set for a high
resolution.
Solution: Sometimes, when you use a high resolution such as 1600x1200, the image is shifted to left or
right on the screen. To correct this, first ensure that your external monitor supports the display mode
(the resolution and the refresh rate) that you have set. If it does not, set a display mode that the monitor
supports. If it does support the display mode you have set, go to the setup menu for the monitor itself
and adjust the settings there. Usually the external monitor has buttons for access to the setup menu. For
details, see the documentation that comes with the monitor.
Audio problems
• Problem: Wave or MIDI sound does not play correctly.
Solution: Ensure that the built-in audio device is configured correctly.
1. Open Control Panel.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the
4. Double-click Sound, video and game controllers.
5. Make sure that the Conexant HD Audio driver is enabled and configured correctly.
• Problem: Recordings made using the microphone input are not loud enough.
Solution: Ensure that the Microphone Boost function is turned on and set by doing the following:
1. Open Control Panel.
3. Click Sound.
4. Click the Recording tab in the Sound window.
5. Select Microphone, and click the Properties button.
6. Click the Levels tab, and move the Microphone Boost slider upwards.
7. Click OK.
Note: For details about controlling volume, refer to your Windows online help.
• Problem: A volume or balance slider cannot be moved.

Solution: The slider might be grayed out. This means that its position is fixed by the hardware and
cannot be changed.
• Problem: The volume sliders do not stay in place when some audio applications are used.
Solution: It is normal for the sliders to change position when certain sound applications are used. The
applications are aware of the settings in the Volume Mixer window and are allowed to change the settings
themselves. An example is the Windows Media Player. Usually the application has sliders available
to control the sound from within the application.
• Problem: The balance slider cannot completely mute one channel.

Solution: The control is designed to compensate for minor differences in balance and does not
completely mute either channel.
• Problem: There is no volume control for MIDI sound in the Volume Mixer window.
Solution: Use the hardware volume control. This is because the built-in synthesizer software does
not support the control.
• Problem: The sound cannot be turned off completely even if you set the Volume Mixer at minimum.
Solution: You still can hear some sound even though you have set the Volume Mixer control at minimum.
To turn off the sound completely, go to the Volume Mixer by clicking the speaker icon in the windows
notification area, then click Mixer. Click the Mute Speaker icon.
• Problem: When you connect a headphone to your computer while playing sound, a speaker does not
produce sound in the MULTI-STREAM mode at Conexant HD Audio Manager.
Solution: Once the headphone is attached, the streaming is automatically redirected to it. If you want
to listen to sound from the speakers again, be sure to set those speakers as the default device. The
procedure is as follows:
1. Open Control Panel. Click Hardware and Sound.
2. Click the Conexant HD Audio Manager icon. The Conexant HD Audio Manager window opens.
3. Look at the tabs of playback devices. If you have attached a headphone, the headphone will be
automatically set as the default device, and the headphone tab icon will be checked.
4. To set a different device as the default, click the speaker tab. Click the Set Default Device drop
down list box. Select Set Default Device. That speaker tab icon will now have a check mark.
5. Play any sound by use of a music program such as Windows Media Player. Ensure that sound
comes from the speakers.
For details, refer to the help information system for Conexant HD Audio Manager.
Battery and power problems

This topic contains instructions on troubleshooting battery and power problems.
Battery problems
• Problem: The built-in battery cannot be fully charged in the standard charge time when the computer is
powered off.
Solution: The battery might be over-discharged. Do the following:
1. Turn off the computer.
2. Connect the ac power adapter to the computer and let it charge.
If a quick charger is available, use it to charge the over-discharged built-in battery.
If the built-in battery cannot be fully charged in 24 hours, call Lenovo Customer Service Center to have
it serviced.
• Problem: Your computer shuts down before the battery-status icon shows that the battery is empty, or
the computer operates after the battery-status icon shows that the battery is empty.
Solution: Discharge and recharge the built-in battery.
• Problem: The operating time for a fully charged built-in battery is short.
Solution: Discharge and recharge the built-in battery. If your battery operating time is still short, call
Lenovo Customer Service Center to have it serviced.
98 User Guide
• Problem: The computer does not operate with a fully charged built-in battery.
Solution: The surge protector in the built-in battery might be active. Turn off the computer for one minute
to reset the protector; then turn on the computer again.
• Problem: The built-in battery cannot be charged.

Solution: You cannot charge the battery when it is too hot. Turn off the computer and allow it to cool to
room temperature. After it cools, recharge the battery. If it still cannot be charged, call Lenovo Customer
Service to have it serviced.
An ac power adapter problem

Problem: The ac power adapter is connected to the computer and the working electrical outlet, but the
power adapter (power plug) icon is not displayed on the windows notification area. Also the system-status
indicator does not blink.

1. Ensure that the connection of the ac power adapter is correct. For instructions on connecting the ac
power adapter, see Safety, Warranty, and Setup Guide that comes with your computer.
2. If the connection of the ac power adapter is correct, turn off the computer, then disconnect the ac
power adapter.
3. Reconnect the ac power adapter, then turn on the computer.
4. If the power adapter icon still is not displayed on the windows notification area and the system-status
indicator does not blink, have the ac power adapter and your computer serviced.
Note: To display the power adapter (power plug) icon, click Show hidden icons on the windows notification
area.
Power problems
If your computer is getting no power at all, check the following items:

1. Verify the power button. Refer to “Status indicators” on page 9. The power button is lit whenever the
computer is on.
2. Check all power connections. Remove any power strips and surge protectors to connect the ac power
adapter directly to the ac power outlet.
3. Inspect the ac power adapter. Check for any physical damage, and ensure that the power cable is firmly
attached to the adapter brick and the computer.
4. Verify the ac power source is working by attaching another device to the outlet.
If your computer does not run on battery power, do the following:

1. If the battery runs out of power, attach ac power adapter to recharge the battery.
2. If the battery is charged but the computer does not run, call Lenovo Customer Service Center to have
it serviced.
A power button problem

Problem: The system does not respond, and you cannot turn off the computer.
Solution: Turn off the computer by pressing and holding the power button for 4 seconds or more. If the
system is still not reset, remove the ac power adapter and reset the system by inserting a straightened paper
clip into the emergency-reset hole. To locate the emergency-reset hole, refer to “Bottom view” on page 8.

Boot problems
Print these instructions now and keep them with your computer for reference later.
If you receive an error message before the operating system loads, follow the appropriate corrective actions
for POST error messages.
If you receive an error message while the operating system is loading the desktop configuration after the
POST is completed, check the following items:
1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message.
2. Go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/ and search for the
error message.
Sleep and hibernation problems

• Problem: The computer enters sleep mode unexpectedly.
Solution: If the microprocessor overheats, the computer automatically enters sleep mode to allow the
computer to cool and to protect the microprocessor and other internal components. Check the settings
for sleep mode.
• Problem: The computer enters sleep mode (the sleep indicator turns on) immediately after the power-on
self-test.
– The battery is charged.
– The operating temperature is within the acceptable range. Refer to “Operating environment” on page
15.
If the battery is charged and the temperature is within range, have the computer serviced.
• Problem: A critical low-battery error occurs, and the computer immediately turns off.
Solution: The battery power is getting low. Connect the ac power adapter to the computer and plug it
into an electrical outlet.
• Problem: The computer display remains blank after you press Fn to return from sleep mode.
Solution: Check whether an external monitor was disconnected or turned off while the computer was
in sleep mode. If you disconnected or turned off the external monitor, connect it or turn it on before
resuming the computer from the sleep mode. When resuming the computer from the sleep mode without
attaching the external monitor or turning it on, and the computer display remains blank, press the display
mode-switching key to bring up the computer display.
• Problem: The computer does not return from sleep mode, or the system-status indicator (illuminated
ThinkPad logo) blinks slowly and the computer does not work.
Solution: If the system does not return from sleep mode, it might have entered sleep or hibernation
mode automatically because the battery is depleted. Check the system-status indicator (illuminated
ThinkPad logo).
– If the system-status indicator (illuminated ThinkPad logo) blinks slowly, your computer is in sleep mode.
Connect the ac power adapter to the computer; then press Fn.
– If the system-status indicator (illuminated ThinkPad logo) is off, your computer is in power-off state or
in hibernation mode. Connect the ac power adapter to the computer; then press the power button
to resume operation.
If the system still does not return from sleep mode, your system might stop responding and you might
not be able to turn off the computer. In this case, you need to reset the computer. If you have not
100 User Guide

saved your data, it might be lost. To reset the computer, press and hold the power button for 4 seconds
or more. If the system is still not reset, remove the ac power adapter and reset the system by inserting
a straightened paper clip into the emergency-reset hole. To locate the emergency-reset hole, refer to
“Bottom view” on page 8.
• Problem: Your computer does not enter sleep or hibernation mode.

Solution: Check whether any option has been selected to disable your computer from entering sleep
or hibernation mode.
If your computer tries to enter sleep mode but the request is rejected, the device attached to the USB
connector might have been disabled. If this occurs, do a hot-unplug-and-plug operation for the USB
device.
• Problem: The battery discharges slightly while the computer is in hibernation mode.
Solution: If the wakeup function is enabled, the computer consumes a small amount of power. This is not
a defect. For details, refer to “Power-saving modes” on page 43.
Problems with drives and other storage devices

This section includes hard disk drive or hybrid drive problems and solid-state drive problems.
hard disk drive or hybrid drive problems

• Problem: The hard disk drive or hybrid drive makes a rattling noise intermittently.
Solution: The rattling noise might be heard:
– When the hard disk drive or hybrid drive begins or finishes getting access to data.
– When you carry the hard disk drive or hybrid drive.
– When you carry your computer.
This is a normal characteristic of a hard disk drive or hybrid drive and is not a defect.
• Problem: The hard disk drive or hybrid drive does not work.
Solution: On the Boot menu of ThinkPad Setup, ensure that the hard disk drive or hybrid drive is on the
Boot priority order list. If it is on the Excluded from boot order list, it is disabled. Select the entry for it
on the list and press the Shift+1 key. This moves the entry to the Boot priority order list.
• Problem: After setting a hard disk password on the hard disk drive or hybrid drive of the computer, you
moved the drive to another computer. Now you cannot unlock the hard disk password.
Solution: Your computer supports an enhanced password algorithm. Computers older than yours might
not support such a security function.
A solid-state drive problem

Problem: When you compress files or folders by use of the data compression function in Windows, and
then decompress them, the process of writing to or reading from the files or folders is slow.
Solution: Apply the disk defragmentation tool in Windows for faster access to the data.
A software problem
Problem: An application does not run correctly.
Solution: Ensure that the problem is not being caused by the application.

Check that your computer has the minimum required memory to run the application. Refer to the manuals
supplied with the application.
Check the following:

• The application is designed to operate with your operating system.
• Other applications run correctly on your computer.
• The necessary device drivers are installed.
• The application works when it is run on some other computer.
If an error message is displayed while you are using the application program, refer to the manuals supplied
with the application.
If the application still does not run correctly, contact your place of purchase or a service representative
for help.
Problems with ports and connectors

The following are the most common problems with ports and connectors.
A USB problem
Problem: A device connected to the USB connector does not work.
Solution: Open the Device Manager window. Ensure that the USB device setup is correct, and that the
assignment of computer resource and the installation of the device driver are correct. To open the Device
Manager window, go to Control Panel and click Hardware and Sound ➙ Device Manager. If you are
prompted for an administrator password or confirmation, type the password or provide confirmation.
Refer to “Diagnosing problems” on page 87 for a diagnostic test of the USB connector.
102 User Guide

Chapter 8. Recovery overview
This chapter provides information about the recovery solutions provided by Lenovo.
• “Recovery overview for the Windows 7 operating system” on page 103
• “Recovery overview for the Windows 8.1 operating system” on page 108
Recovery overview for the Windows 7 operating system

This section provides information about the recovery solutions provided by Lenovo on the Windows 7
operating system.
Notes:
• There are a variety of methods to choose from when considering how to recover in the event of a software-
or hardware-related problem. Some methods vary depending on the type of your operating system.
• The product on the recovery media might be used only for the following purposes:
– Restore the product preinstalled on your computer
– Reinstall the product
– Modify the product using the Additional Files
To prevent potential performance risks or unexpected behavior that might be caused by the new hard disk
drive technology, it is recommended that you use one of the following software programs for backup:
• ThinkVantage Rescue and Recovery version 4.23 or later
• Symantec Norton Ghost version 15 or later
To start the Symantec Norton Ghost program, do the following:
1. Click Start ➙ Run. The Run window opens.
2. Type cmd in the field. Then click OK.
3. Type ghost -align=1mb and press Enter.
• Acronis True Image 2010 or later
• Paragon Backup & Recovery 10 Suit or later, Paragon Backup & Recovery 10 Home or later
Creating and using a recovery media

You can use recovery media to restore the hard disk drive or hybrid drive to the factory default settings.
Recovery media are useful if you transfer the computer to another area, sell the computer, recycle the
computer, or put the computer in an operational state after all other methods of recovery have failed. As a
precautionary measure, it is important to create recovery media as early as possible.
Note: The recovery operations you can perform using recovery media vary depending on the operating
system from which the recovery media were created. The recovery media might contain a boot medium
and a data medium. Your Microsoft Windows license permits you to create only one data medium, so it is
important that you store the recovery media in a safe place after you have made them.
Creating recovery media

This section provides instructions on how to create recovery media.
Note: You can create recovery media using discs or external USB storage devices.

To create recovery media, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Factory Recovery
Disks. Then, follow the instructions on the screen.
Using recovery media

This section provides instructions on how to use recovery media on different operating systems.
• You can use recovery media to restore the computer to the factory default settings only. You can use
recovery media to put the computer in an operational state after all other methods of recovery have failed.
Attention: When you use recovery media to restore the computer to the factory default settings, all the
files currently on the hard disk drive or hybrid drive will be deleted and replaced by the factory default
settings.
To use recovery media, do the following:

1. Depending on the type of your recovery media, connect the boot medium (memory key or other USB
storage device) to the computer, or insert the boot disc into an external optical drive.
2. Repeatedly press and release the F12 key when turning on the computer. When the Boot Menu
window opens, release the F12 key.
3. Select the desired startup device and press Enter. The restore process begins.
4. Follow the instructions on the screen to complete the operation.
Notes:
1. After restoring your computer to the factory default settings, you might have to reinstall device drivers
for some devices. See “Reinstalling preinstalled applications and device drivers” on page 107.
2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If you need to recover
or reinstall your Microsoft Office or Microsoft Works applications, you must use the Microsoft Office
CD or Microsoft Works CD. These discs are provided only with computers preinstalled with Microsoft
Office or Microsoft Works.
Performing backup and recovery operations

The Rescue and Recovery program enables you to back up all your hard disk drive or hybrid drive contents
including the operating system, data files, software programs, and personal settings. You can designate
where the Rescue and Recovery program stores the backup:
• In a protected area of your hard disk drive or hybrid drive
• On an attached external USB hard disk drive
• On a network drive
• On recordable discs (an external recordable optical drive is required for this option)
After you have backed up the contents on the hard disk drive or hybrid drive, you can restore the complete
contents of the hard disk drive or hybrid drive, restore only the selected files, or restore only the Windows
operating system and applications.
Performing a backup operation

This section provides instructions on how to perform a backup operation using the Rescue and Recovery
program.
1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Enhanced
Backup and Restore. The Rescue and Recovery program opens.
2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow.
3. Click Back up your hard drive and select backup operation options. Then, follow the instructions on
the screen to complete the backup operation.
104 User Guide

Performing a recovery operation
This section provides instructions on how to perform a recovery operation using the Rescue and Recovery
program.
2. In the Rescue and Recovery program main window, click the Launch advanced Rescue and Recovery
arrow.
3. Click the Restore your system from a backup icon.
4. Follow the instructions on the screen to complete the recovery operation.
For more information about performing a recovery operation from the Rescue and Recovery workspace, see
“Using the Rescue and Recovery workspace” on page 105.
Using the Rescue and Recovery workspace

The Rescue and Recovery workspace resides in a protected, hidden area of your hard disk drive or hybrid
drive that operates independently from the Windows operating system. This enables you to perform recovery
operations even if you cannot start the Windows operating system. You can perform the following recovery
operations from the Rescue and Recovery workspace:
• Rescue files from your hard disk drive, your hybrid drive, or a backup
The Rescue and Recovery workspace enables you to locate files on your hard disk drive or hybrid drive
and transfer them to a network drive or other recordable media, such as a USB device or a disc. This
solution is available even if you did not back up your files or if changes were made to the files since your
last backup operation. You also can rescue individual files from a Rescue and Recovery backup located
on your local hard disk drive or hybrid drive, a USB device, or a network drive.
• Restore your hard disk drive or hybrid drive from a Rescue and Recovery backup
If you have backed up your hard disk drive or hybrid drive using the Rescue and Recovery program, you
can restore the hard disk drive or hybrid drive from a Rescue and Recovery backup, even if you cannot
start the Windows operating system.
• Restore your hard disk drive or hybrid drive to the factory default settings
The Rescue and Recovery workspace enables you to restore the complete contents of your hard disk
drive or hybrid drive to the factory default settings. If you have multiple partitions on your hard disk drive
or hybrid drive, you have the option to restore the factory default settings to the C: partition and leave
the other partitions intact. Because the Rescue and Recovery workspace operates independently from
the Windows operating system, you can restore the factory default settings even if you cannot start the
Windows operating system.
Attention: If you restore the hard disk drive or hybrid drive from a Rescue and Recovery backup or restore
the hard disk drive or hybrid drive to the factory default settings, all files on the primary hard disk drive or
hybrid drive partition (usually drive C:) will be deleted in the recovery process. If possible, make copies of
important files. If you are unable to start the Windows operating system, you can use the rescue files feature
of the Rescue and Recovery workspace to copy files from your hard disk drive or hybrid drive to other media.
To start the Rescue and Recovery workspace, do the following:

1. Ensure that the computer is turned off.
2. Repeatedly press and release the F11 key when turning on the computer. When you hear beeps or
see a logo screen, release the F11 key.
3. If you have set a Rescue and Recovery password, type your password when prompted. The Rescue
and Recovery workspace opens after a short delay.
Chapter 8. Recovery overview 105

Note: If the Rescue and Recovery workspace fails to open, see “Solving recovery problems” on
page 108.
4. Do one of the following:
• To rescue files from your hard disk drive, your hybrid drive or a backup, click Rescue files and
• To restore your hard disk drive or hybrid drive from a Rescue and Recovery backup or to restore
your hard disk drive or hybrid drive to the factory default settings, click Restore your system and
For more information about the features of the Rescue and Recovery workspace, click Help.
Notes:
1. After restoring your hard disk drive or hybrid drive to the factory default settings, you might have to
reinstall device drivers for some devices. See “Reinstalling preinstalled applications and device drivers”
on page 107.
2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If you need to recover
or reinstall your Microsoft Office or Microsoft Works applications, you must use the Microsoft Office
CD or Microsoft Works CD. These discs are provided only with computers preinstalled with Microsoft
Office or Microsoft Works.
Creating and using a rescue medium

With a rescue medium, such as a disc or a USB hard disk drive, you can recover the computer from failures
that prevent you from gaining access to the Rescue and Recovery workspace on your hard disk drive or
hybrid drive.
Notes:
1. The recovery operations you can perform using a rescue medium vary depending on the operating
system.
2. The rescue disc can be started in all types of external optical drives.
Creating a rescue medium

This section provides instructions on how to create a rescue medium.
2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow.
3. Click the Create Rescue Media icon. The Create Rescue and Recovery Media window opens.
4. In the Rescue Media area, select the type of the rescue medium you want to create. You can create a
rescue medium using a disc or a USB hard disk drive.
5. Click OK and follow the instructions on the screen to create a rescue medium.
Using a rescue medium

This section provides instructions on how to use the rescue medium you have created.
• If you have created a rescue medium using a disc, use the following instructions to use the rescue medium:
1. Turn off your computer.
3. In the Boot Menu window, select the desired external optical drive as the first boot device. Then,
insert the rescue disc into the optical drive and press Enter. The rescue medium starts.
106 User Guide

• If you have created a rescue medium using a USB optical drive or a USB hard disk drive, use the following
instructions to use the rescue medium:
1. Turn on your computer. When the ThinkPad logo is displayed, press F1. The ThinkPad Setup
program starts.
2. Choose the Config menu and change the USB 3.0 Mode to be Disabled from the USB submenu.
3. Turn off your computer.
4. Attach the USB optical drive or hard disk drive to one of the USB connectors on your computer.
6. In the Boot Menu window, select the USB CD or USB HDD as the first boot device and press Enter.
The rescue medium starts.
When the rescue medium starts, the Rescue and Recovery workspace opens. The help information for
each feature is available from the Rescue and Recovery workspace. Follow the instructions to complete
the recovery process.
Reinstalling preinstalled applications and device drivers

Your computer has provisions that enable you to reinstall selected factory-installed applications and device
drivers.
Reinstalling preinstalled applications

To reinstall selected application programs, do the following:
1. Turn on your computer.
2. Go to the C:\SWTOOLS directory.
3. Open the APPS folder. In it are several subfolders named for the various preinstalled applications.
4. Open the subfolder for the application you are reinstalling.
5. Double-click Setup, and then follow the on-screen steps to reinstall the program.
Reinstalling preinstalled device drivers

Attention: When you reinstall device drivers, you are changing the current configuration of your computer.
Reinstall device drivers only when it is necessary to correct a problem with your computer.
To reinstall a device driver for a factory-installed device, do the following:

1. Turn on your computer.
2. Go to the C:\SWTOOLS directory.
3. Open the DRIVERS folder. Within the DRIVERS folder are several subfolders named for the various
devices installed in your computer (for example, AUDIO and VIDEO).
4. Open the subfolder for the device.
5. Reinstall the device driver by one of the following methods:
• In the subfolder for the device, look for a text file (a file with the extension .txt). The text file contains
information on how to reinstall that device driver.
• If the subfolder for the device contains a file of setup information (a file with the extension .inf), you
can use the Add New Hardware program (in the Windows Control Panel) to reinstall the device driver.
Not all device drivers can be reinstalled by use of this program. In the Add New Hardware program,
when prompted for the device driver you want to install, click Have Disk and Browse. Then select
the device driver file from the device subfolder.

• In the subfolder for the device, look for the executable file (a file with the extension .exe). Double-click
the file, and follow the instructions on the screen.
Attention: If you need updated device drivers, do not download them from the Windows Update Web site.
Obtain them from Lenovo. For more information, see “Making sure device drivers are current” on page 82.
Solving recovery problems

If you are unable to access the Rescue and Recovery workspace or the Windows environment, do one
of the following:
• Use a rescue medium to start the Rescue and Recovery workspace. See “Creating and using a rescue
medium” on page 106.
• Use recovery media if all other methods of recovery have failed and you need to restore the hard disk drive
or hybrid drive to the factory default settings. See “Creating and using a recovery media” on page 103.
• Change the USB 3.0 Mode to be Disabled from the ThinkPad Setup menu. See “Creating and using a
rescue medium” on page 106.
Note: If you are unable to access the Rescue and Recovery workspace or the Windows environment from
a rescue medium or recovery media, you might not have the rescue device (an internal hard disk drive or
hybrid drive, a disc, a USB hard disk drive, or other external devices) set as the first boot device in the
startup device sequence. You must first ensure that your rescue device is set as the first boot device in
the startup device sequence in the ThinkPad Setup program. For detailed information about temporarily or
permanently changing the startup device sequence, see “Startup menu” on page 77.
It is important to create a rescue medium and a set of recovery media as early as possible and store them
in a safe place for future use.
Recovery overview for the Windows 8.1 operating system

This section provides information about the recovery solutions for the Windows 8.1 operating system.
A Windows recovery image is preinstalled in the recovery partition on your computer. The Windows recovery
image enables you to refresh your computer, or reset your computer to the factory default settings.
You can create recovery media as backups or replacement for the Windows recovery image. With the
recovery media, you can troubleshoot and fix the problems on your computer even if you cannot start the
Windows 8.1 operating system. It is recommended that you create recovery media as early as possible. For
more information, see “Creating and using recovery media” on page 109.
Refreshing your computer

If your computer does not perform well and the problem might be caused by a recently installed program,
you can refresh your computer without losing your personal files or changing your settings.
Attention: If you refresh your computer, the programs that came with your computer and the programs that
you installed from Windows Store will be reinstalled, but all other programs will be removed.
To refresh your computer, do the following:

1. Move your pointer to the top-right or bottom-right corner of the screen to bring up the charms. Click
Settings ➙ Change PC settings ➙ Update and recovery ➙ Recovery.
2. In the Refresh your PC without affecting your files section, click Get started.
3. Follow the instructions on the screen to refresh your computer.
108 User Guide

Resetting your computer to the factory default settings
If you want to recycle your computer or just start over, you can reset your computer to the factory default
settings. Resetting the computer will reinstall the operating system, reinstall all the programs that came with
your computer, and reset all the settings to the factory default settings.
Attention: If you reset the computer to the factory default settings, all your personal files and settings will be
deleted. To avoid data loss, make a backup copy of all the data that you want to keep.
To reset your computer to the factory default settings, do the following:

2. In the Remove everything and reinstall Windows section, click Get started. Then click Next to
confirm the operation.
3. Depending on your needs, do one of the following:
• To perform a quick format, click Just remove my files to start the process. The process will take
several minutes.
• To perform a complete format, click Fully clean the drive to start the process. The process will
take several hours.
4. Follow the instructions on the screen to reset your computer to the factory default settings.
Using the advanced startup options

With the advanced startup options, you can change the firmware settings of the computer, change the
startup settings of the Windows operating system, start the computer from an external device, or restore the
Windows operating system from a system image.
To use the advanced startup options, do the following:

2. In the Advanced startup section, click Restart now ➙ Troubleshoot ➙ Advanced options.
3. Select a desired startup option, then follow the instructions on the screen.
Recovering your operating system if Windows 8.1 fails to start

The Windows recovery environment on your computer is capable of operating independently from the
Windows 8.1 operating system. This enables you to recover or repair the operating system even if the
Windows 8.1 operating system fails to start.
After two consecutive failed boot attempts, the Windows recovery environment starts automatically. Then
you can choose repair and recovery options by following the instructions on the screen.
Note: Ensure that your computer is connected to ac power during the recovery process.
Creating and using recovery media

You can create recovery media as backups for the Windows recovery environment and the Windows
recovery image. If you cannot start the computer, you can use recovery media to troubleshoot and fix the
problems on your computer.
It is recommended that you create recovery media as early as possible. Once you create recovery media,
keep them in a safe place and do not use them to store other data.

Creating recovery media
To create recovery media, you need a USB drive with at least 8 GB of storage. The required USB capacity
depends on the size of the recovery image.
Attention: Creating recovery media will delete anything stored on the USB drive. To avoid data loss, make a
backup copy of all the data that you want to keep.
To create recovery media, do the following:
Note: Ensure that your computer is connected to ac power.

1. Move your pointer to the top-right or bottom-right corner of the screen to bring up the charms, and
click Search.
2. Type recovery in the Search field and click the Search button. Then click Create a recovery drive.
3. Click Yes in the User Account Control window to allow the Recovery Media Creator program to start.
4. Ensure that you select the Copy the recovery partition from the PC to the recovery drive. option.
Then click Next.
Important: If you clear the Copy the recovery partition from the PC to the recovery drive. option,
you will create recovery media without the recovery partition content. You still can start the computer
from the recovery media, but you might be unable to recover your computer if the recovery partition on
your computer is damaged.
5. Connect a proper USB drive then click Next.
6. Click Create in the Recovery Drive window. The creation of the recovery media starts.
7. When the creation of the recovery media finishes, do one of the following:
• To keep the recovery partition on your computer, click Finish.
• To delete the recovery partition on your computer, click Delete the recovery partition.
Attention: If you delete the recovery partition on your computer, do keep the recovery media in a
safe place. The Windows recovery image will not be stored in your computer anymore, and you will
need the recovery media to refresh or reset your computer.
8. Remove the USB drive. The recovery media are created successfully.
Using recovery media

If you cannot start your computer, or if you cannot start the Windows recovery image on your computer, use
recovery media to recover your computer.
To use recovery media, do the following:
Note: Ensure that your computer is connected to ac power.

1. Turn on or restart the computer. Before the Windows operating system starts, repeatedly press the F12
key. The Boot Menu window opens.
2. Select the recovery drive as the boot device.
3. Select a preferred language and then select a preferred keyboard layout.
4. Click Troubleshoot to display the optional recovery solutions.
5. Select a corresponding recovery solution according to your situation. For example, select Reset your
PC if you want to reset your computer to the factory default settings.
For more information about the recovery solutions provided by the Windows 8.1 operating system, go to:
http://go.microsoft.com/fwlink/?LinkID=263800
110 User Guide

Chapter 9. Replacing devices
This chapter provides instructions on how to install or replace hardware for your computer.
• “Static electricity prevention” on page 111
• “Disabling the built-in battery” on page 111
• “Installing or replacing the SIM card” on page 112
• “Replacing the keyboard” on page 113
• “Replacing the base cover assembly” on page 117
• “Replacing the memory module” on page 119
• “Replacing the internal storage drive” on page 121
• “Replacing the wireless WAN card” on page 123
• “Replacing the coin-cell battery” on page 125
Static electricity prevention

Static electricity, although harmless to you, can seriously damage computer components and options.
Improper handling of static-sensitive parts can cause damage to the part. When you unpack an option or
a CRU, do not open the static-protective package that contains the part until the instructions direct you
to install the part.
When you handle options or CRUs, or perform any work inside the computer, take the following precautions
to avoid static-electricity damage:
• Limit your movement. Movement can cause static electricity to build up around you.
• Always handle components carefully. Handle adapters, memory modules, and other circuit boards by the
edges. Never touch exposed circuitry.
• Prevent others from touching components.
• When you install a static-sensitive option or CRU, touch the static-protective package that contains the
part to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two
seconds. This reduces static electricity in the package and your body.
• When possible, remove the static-sensitive part from the static-protective package and install the part
without setting it down. When this is not possible, place the static-protective package on a smooth,
level surface and place the part on the package.
• Do not place the part on the computer cover or other metal surface.
Disabling the built-in battery

Before replacing any hardware component except the removable battery, ensure that you have disabled the
built-in battery by doing the following:
1. Turn off your computer and disconnect the ac power adapter and all cables from the computer.
2. Turn on your computer. When the ThinkPad logo is displayed, immediately press F1 to enter ThinkPad
Setup.
3. Select Config ➙ Power. The Power submenu is displayed.
4. Select Disable built-in battery and press Enter.
5. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off
automatically. Wait three to five minutes to let the computer cool.

Installing or replacing the SIM card
Before you start, print these instructions. Read the important safety information first.
SIM card is a small plastic card with Integrated Circuit (IC) chip mounted on one side of the card.
If your computer supports wireless WAN connections, your computer might require a SIM card to establish
wireless WAN connections. Depending on the country or region of delivery, you might need to purchase
a SIM card or a SIM card might already be installed in your computer or is part of the shipping contents
that come with your computer.
To install or replace the SIM card, do the following:

1. Disable the built-in battery. See “Disabling the built-in battery” on page 111.
2. Close the computer display, and turn the computer over.
3. Locate the SIM card door at the left side of the computer. Gently pivot the SIM card door upwards.
4. Push the SIM card inward 1 , and then release it. The SIM card ejects. Gently slide the SIM card
out of the SIM card slot 2 .
112 User Guide

5. Install a new SIM card into the SIM card slot.
6. Close the SIM card door until it snaps into position.
7. Reconnect the ac power adapter and all cables.
Replacing the keyboard

Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
Removing the keyboard

To remove the keyboard, do the following:
Note: Your computer might look different from the illustrations in this topic.
2. Disconnect the ac power adapter and all cables from the computer. Wait several minutes to let the
computer cool.
3. Close the computer lid and turn the computer over.
Chapter 9. Replacing devices 113

4. Loosen the screws that secure the keyboard.
5. Push hard in the direction shown by the arrows to unlatch the keyboard.
114 User Guide

6. Pivot the keyboard slightly upward as shown by the arrow 1 . Then turn over the keyboard as shown
by the arrow 2 .
7. Detach the connectors and remove the keyboard.
Installing the new keyboard

To install the new keyboard, do the following:

1. Attach the connectors and then turn over the keyboard.
2. Insert the keyboard as shown by the arrows. Ensure that the rear edge of the keyboard is under the
frame of the keyboard bezel.
116 User Guide

3. Slide the keyboard in the direction shown by the arrows until the latches of the keyboard are hidden
under the keyboard bezel.
4. Turn the computer over and tighten the screws.
5. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Replacing the base cover assembly

To replace the base cover assembly, do the following:


3. Remove three screw caps.
4. Loosen the screws 1 , pry up the latches 2 and remove the base cover assembly 3 .
118 User Guide

5. Install the new base cover assembly in place and tighten the screws to secure the base cover assembly.
6. Reinstall three screw caps.
7. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing the memory module

Increasing memory capacity is an effective way to make programs run faster. To replace the memory
module, read the following prerequisites, and then the instructions.

Note: The operating speed of the memory module has dependency on the system configuration. In some
conditions, the memory module in your computer might not be able to operate at the maximum speed.
Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. Static electricity could damage the memory module.
Replacing the memory module

To replace the memory module, do the following:
3. Remove the base cover assembly. See “Replacing the base cover assembly” on page 117.
4. Open the latches on both sides of the memory slot at the same time 1 , and then remove the memory
module 2 .
5. Place the notched end of the new memory module toward the contact edge side of the memory slot,
and insert the memory module into the memory slot at an angle of about 20 degrees 1 . Pivot the
memory module downward until it snaps into place 2 . Ensure that the memory module is firmly installed
in the memory slot and cannot be moved easily.
Attention: Do not touch the contact edge of the memory module. Otherwise the memory module
might be damaged.
120 User Guide

6. Reinstall the base cover assembly.
Replacing the internal storage drive

Attention: The internal storage drive (hard disk drive, solid-state drive, or hybrid drive) is sensitive. Incorrect
handling can cause damage and permanent loss of data. Observe the following guidelines:
• Replace the storage drive only if you upgrade it or have it repaired. The connectors and slot of the storage
drive are not designed for frequent changes, or drive swapping.
• Do not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, that
absorbs any physical shocks.
• Do not apply pressure to the cover of the drive.
• Do not touch the connector.
• Before removing the storage drive, make a backup copy of all the information on it, and then turn off the
computer.
• Never remove the drive while the computer is operating, in sleep mode, or in hibernation mode.
To replace the storage drive, do the following:

4. Detach the connector 1 and release the drive from the drive bay by lifting the tab 2 .

5. Disconnect the drive cable from the storage drive.
6. Reconnect the drive cable to the new storage drive.
7. Place the new drive into the drive bay.
122 User Guide

8. Attach the connector.

Replacing the wireless WAN card

Note: Some models are equipped with a wireless WAN card.
Attention: Before you start installing a wireless WAN card, touch a metal table or a grounded metal object.
This action reduces any static electricity from your body. Static electricity could damage the card.
To replace the wireless WAN card, do the following:

4. If a tool is provided with the new wireless WAN card to help you disconnect cables, use the tool to
disconnect the cables from the wireless WAN card. If no such a tool is provided, hold the cable
connector with your fingers and gently disconnect each cable from the wireless WAN card.

5. Remove the screw. The wireless WAN card is released from the secured position and pivots upward.
Then remove the card.
6. Align the contact edge of the new wireless WAN card with the key in the slot. Then carefully insert the
new wireless WAN card into the slot. Then install the screw to secure the card.
7. Connect the antenna cables to the wireless WAN card. Ensure that you attach the red cable to the main
connector and the blue cable to the auxiliary connector on the wireless WAN card.

124 User Guide

Replacing the coin-cell battery
DANGER
If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell battery
contains a small amount of harmful substances. To avoid possible injury:
• Replace only with a battery of the type recommended by Lenovo.
• Keep the battery pack away from fire.
• Do not expose it to excessive heat.
• Do not expose it to water or rain.
• Do not short-circuit it.
• Do not drop, crush, puncture the battery, or make it subject to strong forces. Battery abuse or
mishandling can cause the battery to overheat, which can cause gasses or flame to “vent” from
the battery pack or coin-cell battery.
To replace the coin-cell battery, do the following:

4. Detach the connector 1 , and then remove the coin-cell battery 2 .

5. Install the new coin-cell battery 1 , and then attach the connector 2 .

After you replace the coin-cell battery, reset the system date and time in the ThinkPad Setup program.
See “Date and Time menu” on page 72.
126 User Guide

Chapter 10. Getting support
This chapter provides information about getting help and support from Lenovo.
• “Before you contact Lenovo” on page 127
• “Getting help and service” on page 127
• “Purchasing additional services” on page 129
Before you contact Lenovo

Often, you can solve your computer problems by referring to the information in the explanations of error
codes, running diagnostic programs, or by consulting the Lenovo Web site.

Register your computer with Lenovo. For more information, see “Registering your computer” on page 21.
Downloading system updates

Downloading updated software might resolve problems you experience with your computer.
To download updated software, go to the following Web site and follow the instructions on the screen:
Recording information
Before you talk to a Lenovo representative, record the following important information about your computer.
Recording problem symptoms and details
Collect the answers to the questions below before you call for help. Then, you will be able to get help
as quickly as possible.
• What is the problem? Is it continuous or intermittent?
• Is there an error message? What is the error code, if any?
• What operating system are you using? Which version?
• Which software applications were running at the time of the problem?
• Can the problem be reproduced? If so, how?
Recording system information
The serial number label is on the bottom of your computer. Record the machine type and the serial number.
• What is the name of your Lenovo product?
• What is the machine type?
• What is the serial number?
Getting help and service

If you need help, service, technical assistance, or just want more information about Lenovo products, you
will find a wide variety of sources available from Lenovo to assist you. This section contains information
about where to go for additional information about Lenovo and our products, what to do if you experience a
problem with your computer, and whom to call for service should it be necessary.

Information about your computer and preinstalled software, if any, is available in the documentation that
comes with your computer. That documentation includes printed books, online books, readme files, and
help files. In addition, information about Lenovo products is available on the World Wide Web.
Microsoft Service Packs are the latest software source for Windows product updates. They are available
through Web download (connection charges might apply) or through disc. For more specific information and
links, go to http://www.microsoft.com. Lenovo offers technical assistance with installation of, or questions
related to, Service Packs for your Lenovo-preloaded Microsoft Windows product. For information, contact
the Customer Support Center.
Using diagnostic programs

Many computer problems can be solved without outside assistance. If you experience a problem with your
computer, the first place to start is the troubleshooting information of your computer documentation. If you
suspect a software problem, see the documentation, including readme files and help information systems,
which comes with the operating system or application program.
ThinkPad notebook computers come with a set of diagnostic programs that you can use to help you identify
hardware problems. See “Diagnosing problems” on page 87 for instructions on using the diagnostic
programs.
The troubleshooting information or the diagnostic programs might tell you that you need additional or
updated device drivers or other software. You can get the latest technical information and download device
drivers and updates from the Lenovo Web site at http://www.lenovo.com/support.
Lenovo Support Web site

Technical support information is available on the Lenovo Support Web site at:
This Web site is updated with the latest support information such as the following:
• Drivers and software
• Diagnostic solutions
• Product and service warranty
• Product and parts details
• User guides and manuals
• Knowledge base and frequently asked questions
Calling Lenovo
If you have tried to correct the problem yourself and still need help, during the warranty period, you can
get help and information by telephone through the Customer Support Center. The following services are
available during the warranty period:
• Problem determination - Trained personnel are available to assist you with determining if you have a
hardware problem and deciding what action is necessary to fix the problem.
• Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty,
trained service personnel are available to provide the applicable level of service.
• Engineering change management - Occasionally, there might be changes that are required after a product
has been sold. Lenovo or your reseller, if authorized by Lenovo, will make selected Engineering Changes
(ECs) that apply to your hardware available.
128 User Guide

The following items are not covered:
• Replacement or use of parts not manufactured for or by Lenovo or non-warranted parts
Note: All warranted parts contain a 7-character identification in the format FRU XXXXXXX or a
10-character identification in the format FRU XXXXXXXXXX.
• Identification of software problem sources
• Configuration of UEFI BIOS as part of an installation or upgrade
• Changes, modifications, or upgrades to device drivers
• Installation and maintenance of network operating systems (NOS)
• Installation and maintenance of application programs
For the terms and conditions of the Lenovo Limited Warranty that applies to your Lenovo hardware product,
see “Warranty information” in the Safety, Warranty, and Setup Guide that comes with your computer.
If possible, be near your computer when you make your call in case the technical assistance representative
needs to help you resolve a computer problem. Ensure that you have downloaded the most current drivers
and system updates, run diagnostics, and recorded information before you call. When calling for technical
assistance, have the following information available:
• Machine type and model
• Serial numbers of your computer, monitor, and other components, or your proof of purchase
• Description of the problem
• Exact wording of any error messages
• Hardware and software configuration information for your system
Telephone numbers
For a list of the Lenovo Support phone numbers for your country or region, go to
http://www.lenovo.com/support/phone or refer to the Safety, Warranty, and Setup Guide that comes with
your computer.
Note: Phone numbers are subject to change without notice. The latest phone numbers are available at
http://www.lenovo.com/support/phone. If the number for your country or region is not provided, contact
your Lenovo reseller or Lenovo marketing representative.
Purchasing additional services

During and after the warranty period, you can purchase additional services, such as support for Lenovo
and non-Lenovo hardware, operating systems, and application programs; network setup and configuration
services; upgraded or extended hardware repair services; and custom installations services. Service
availability and service name might vary by country.
For more information about these services, go to:

http://www.lenovo.com/essentials
Chapter 10. Getting support 129

130 User Guide
Chapter 11. You and your computer
This chapter provides information about accessibility, comfort, and travelling with your computer.
• “Accessibility and comfort” on page 131
• “Traveling with your computer” on page 136
Accessibility and comfort

Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort.
Arrange your workplace and the equipment you use to suit your individual needs and the kind of work
that you perform. In addition, use healthy work habits to maximize your performance and comfort while
using your computer.
The following topics provide information about arranging your work area, setting up your computer
equipment, and establishing healthy work habits.
Lenovo is committed to providing the latest information and technology to our customers with disabilities.
Refer to our accessibility information which outlines our efforts in this area. See “Accessibility information”
on page 132.
Ergonomic information
Working in the virtual office might mean adapting to frequent changes in your environment. Following some
simple rules will make things easier and bring you the maximum benefits of your computer. Keeping in mind
such basics as good lighting and proper seating, for example, can help you improve your performance
and achieve greater comfort.
This example shows someone in a conventional setting. Even when not in such a setting, you can follow
many of these tips. Develop good habits, and they will serve you well.
General posture: Make minor modifications in your working posture to deter the onset of discomfort
caused by long periods of working in the same position. Frequent short breaks from your work also help
to prevent minor discomfort associated with your working posture.

Display: Position the display to maintain a comfortable viewing distance of 510-760 mm (20-30 inches).
Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the
display screen clean and set the brightness to levels that enable you to see the screen clearly. Press the
brightness-down key or the brightness-up key to adjust display brightness.
Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position.
Chair: Use a chair that gives you good back support and seat height adjustment. Use chair adjustments to
best suit your desired posture.
Arm and hand position: If available, use chair arm rests or an area on your working surface to provide
weight support for your arms. Keep your forearms, wrists, and hands in a relaxed and neutral (horizontal)
position. Type with a soft touch without pounding the keys.
Leg position: Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest.
What if you are traveling?
It might not be possible to observe the best ergonomic practices when you are using your computer
while on the move or in a casual setting. Regardless of the setting, try to observe as many of the tips as
possible. Sitting properly and using adequate lighting, for example, will help you maintain desirable levels
of comfort and performance.
Questions about vision?
The visual display screens of ThinkPad notebook computers are designed to meet the highest standards
and to provide you with clear, crisp images and large, bright displays that are easy to see, yet easy on the
eyes. Of course, any concentrated and sustained visual activity can be tiring. If you have questions on eye
fatigue or visual discomfort, consult a vision care specialist for advice.
Comfort
Observe the following guidelines to achieve greater comfort and improve performance.
Active sitting and rest breaks: The longer you sit and work with your computer, the more important it is to
observe your working posture. Follow “Ergonomic information” on page 131 and practice “active sitting” to
avoid discomfort associated with your working postures. Making minor voluntary postural changes and
taking short frequent work breaks are the key ingredients for healthy computing. Your computer is light and
mobile; you can easily reposition your working surface to accommodate many posture modifications.
Work area setup options: Familiarize yourself with all of your office furniture so that you know how to
adjust your work surface, seat, and other work tools to accommodate your preferences for comfort.
If your work area is not in an office setting, be sure to take special note of employing active sitting
and taking work breaks. Many ThinkPad product solutions are available to help you modify and expand
your computer to best suit your needs. Access the following Web site to view some of these options:
http://www.lenovo.com/essentials. Explore your options for docking solutions and external products that
provide the adjustability and features that you want.
Accessibility information
Lenovo is committed to providing people with disabilities greater access to information and technology.
Some technologies are already provided in your operating system. Others can be purchased through
vendors.
132 User Guide

Users also can use the Ease of Access Center provided in the Windows operating system to configure their
computers to suit their physical and cognitive needs. The Ease of Access Center is a central location
that you can use to configure the accessibility settings and programs available in the Microsoft Windows
operating system. To use the Ease of Access Center, open Control Panel and click Ease of Access
➙ Ease of Access Center.
The following information provides ways to help users who have hearing, vision, and mobility limitations get
the most out of their computer experience.
On-screen notification
On-screen notification helps hearing-impaired people be aware of the status of their computer. On-screen
notification replaces sounds with visual cues or text captions to indicate that activity is happening on the
computer. As a result, system alerts are noticeable even when they are not heard. For example, when you
select one object with your keyboard, the object is highlighted. When you move the pointer to one object
with your mouse, the introductory text of the object is displayed.
To use on-screen notification, open Control Panel, click Ease of Access ➙ Ease of Access Center, and
then click Use text or visual alternative for sounds.
Audio notification
Audio notification helps visually impaired people or people with weak sight be aware of the status of their
computer.
To use audio notification, open Control Panel, click Ease of Access ➙ Ease of Access Center ➙ Use the
computer without a display, and then select Turn on Audio Description.
Narrator
Narrator is a screen reader that reads what is displayed on the screen aloud and describes events like
error messages.
To open Narrator, do the following:

• For Windows 7: Click the Start button. Then, type Narrator into the search field. In the list of results,
click Narrator.
• For Windows 8.1: Click the Search icon on the top-right corner of the Start screen and then type Narrator
into the displayed search box. If you are using a keyboard, you can just start typing on the Start screen and
then the search box and search results are displayed automatically. In the list of results, click Narrator.
For more information about how to use and configure Narrator, see the Windows Help and Support
information system.
Screen-reader technologies
Screen-reader technologies are primarily focused on software program interfaces, help information systems,
and a variety of online documents. For additional information about screen readers, see the following:
• Using PDFs with screen readers:
http://www.adobe.com/accessibility.html?promoid=DJGVE
• Using the JAWS screen reader:
http://www.freedomscientific.com/jaws-hq.asp
• Using the NVDA screen reader:
http://www.nvaccess.org/
Chapter 11. You and your computer 133

Speech Recognition
Speech Recognition enables you to control your computer by voice.
Using only your voice, you can start programs, open menus, click buttons and other objects on the screen,
dictate text into documents, and write and send e-mails. Everything you do with the keyboard and mouse
can be done with only your voice.
To open Speech Recognition, do the following:

• For Windows 7: Click the Start button. Then, type Speech Recognition into the search field. In the list
of results, click Speech Recognition.
• For Windows 8.1: Click the Search icon on the top-right corner of the Start screen and then type Speech
Recognition into the displayed search box. If you are using a keyboard, you can just start typing on the
Start screen and then the search box and search results are displayed automatically. In the list of results,
click Speech Recognition.
For more information about how to use and configure Speech Recognition, see the Windows Help and
Support information system.
Customizable text size

Depending on your preference, you can change only the text size instead of changing the size of everything
on the desktop. To change the text size, open Control Panel and click Appearances and Personalization ➙
Display. Then, go to Change only the text size and set a text size that meets your needs.
Magnifier
Your computer is equipped with the Microsoft Magnifier to help visually impaired people use the computer
more comfortably. Magnifier is a useful utility that enlarges part or all of your screen so that you can see the
words and images better. Magnifier is part of the Ease of Access Center.
To open Magnifier, do the following:

• For Windows 7: Click the Start button, click All Programs ➙ Accessories ➙ Ease of Access, and
then click Magnifier.
• For Windows 8.1: Click the Search icon on the top-right corner of the Start screen and then type Magnifier
into the displayed search box. If you are using a keyboard, you can just start typing on the Start screen and
then the search box and search results are displayed automatically. In the list of results, click Magnifier.
For more information about how to use and configure Magnifier, see the Windows Help and Support
information system.
Note: For touch-screen computer models, you also can zoom in and zoom out by using touch gestures
instead of the keyboard. See “Zoom” on page 134.
Zoom
You can use the zoom feature to enlarge or reduce the size of text, pictures, maps, or other objects.
• From the keyboard:

– Zoom in: Press the Windows logo key + the plus-sign key (+) to enlarge the size of text, pictures,
maps, or other objects.
– Zoom out: Press the Windows logo key + the minus-sign (-) key to reduce the size of text, pictures,
• From the touch screen:
134 User Guide

– Zoom in: Move two fingers farther apart on the touch screen to enlarge the size of text, pictures,
– Zoom out: Move two fingers closer together on the touch screen to reduce the size of text, pictures,
Screen resolution
You can make your documents easier to read by adjusting the screen resolution of your computer. To adjust
the screen resolution, right click anywhere on the desktop, click Screen resolution, and then adjust the
settings as you prefer.
Note: Setting too low of a resolution might prevent some items from fitting on the screen.
For alternatives on increasing the size of text and other objects, see the following:
• “Customizable text size” on page 134
• “Magnifier” on page 134
• “Zoom” on page 134
Ease of Access keyboard shortcuts

Keyboard shortcuts are combinations of two or more keys that you can use to perform a task that would
typically require a mouse or other pointing devices. Keyboard shortcuts provide an easier alternative to
interact with your computer as you work with the Windows operating system and most applications.
The following table contains keyboard shortcuts that can help make your computer easier to use.
Keyboard shortcut Function

Windows logo key + U Open the Ease of Access Center
Right Shift for eight seconds Turn Filter Keys on or off
Shift five times Turn Sticky Keys on or off
Num Lock for five seconds Turn Toggle Keys on or off
Left Alt+Left Shift+Num Lock Turn Mouse Keys on or off
Left Alt+Left Shift+PrtScn (or PrtSc) Turn High Contrast on or off
For more information, go to http://windows.microsoft.com/, and then type any of the following keywords for
searching: keyboard shortcuts, access keys, key combinations, shortcut keys.
On-Screen Keyboard
If you prefer to type or enter data into your computer without using a physical keyboard, you can use
On-Screen Keyboard. On-Screen Keyboard displays a visual keyboard with all the standard keys. You can
select keys using the mouse or another pointing device, or you can tap to select the keys if your computer
supports multi-touch screen.
To open On-Screen Keyboard, do the following:

• For Windows 7: Click the Start button. Then, type On-Screen Keyboard into the search field. In the list of
results, click On-Screen Keyboard.
• For Windows 8.1: Click the Search icon on the top-right corner of the Start screen and then type
On-Screen Keyboard into the displayed search box. If you are using a keyboard, you can just start typing
on the Start screen and then the search box and search results are displayed automatically. In the list of
results, click On-Screen Keyboard.

For more information about how to use and configure On-Screen Keyboard, see the Windows Help and
Support information system.
Personalized keyboard
The tactile bumps on the keyboard provide a reference point from which you can easily locate all keys on
the keyboard without visual assistance.
To adjust your keyboard settings, open Control Panel, click Ease of Access ➙ Ease of Access Center,
and then click Make the keyboard easier to use.
Industry-standard connectors
Your computer provides industry-standard connectors that enable you to connect assistive devices,
if needed.
For more information on the location and function of each connector, see “Locating computer controls,
connectors, and indicators” on page 1.
Smart latches
The smart latches on some ThinkPad notebook computer lid and the removable battery enable you to
open your computer lid and remove the removable battery using only one hand with physical strength of
less than 22.2 N.
Documentation in accessible formats

Lenovo provides electronic documentation in accessible formats. Lenovo electronic documentation, such as
properly tagged PDF files or HyperText Markup Language (HTML) files, is developed to ensure that visually
impaired users can read the documentation through a screen reader. Each image in the documentation also
includes adequate alternative text to explain the image so that visually impaired users can understand the
image when they use a screen reader.
Traveling with your computer

This topic provides information to help you work with your computer when you are travelling.
Travel tips
Use the following travel tips to travel more confidently and efficiently with your computer.
• Although it is safe to allow your computer to go through the x-ray machines at airport security stations, it
is important to keep your eyes on the computer at all times to prevent theft.
• Consider bringing an electrical adapter for use in an airplane or automobile.
• If you carry an ac power adapter, detach the ac cord from it to avoid damaging the cord.
Travel tips on airplanes

If you carry your computer into an airplane, take note of the following tips:
• If you intend to use your computer or wireless services (such as Internet and Bluetooth), check with the
airline for restrictions and availability of services before boarding the airplane. If there are restrictions
on the use of computers with wireless features on the airplane, you must abide by those restrictions. If
necessary, disable wireless features before boarding.
• Be careful about the seat in front of you on airplanes. Angle your computer display so that it does not get
caught when the person in front of you leans back.
• When taking off, remember to turn off your computer or put it into hibernation mode.
136 User Guide

Travel accessories
The following is a checklist of items to consider packing when you are going to travel:
• ThinkPad ac power adapter
• ThinkPad AC/DC combo adapter
• External mouse (if you are accustomed to using one)
• A quality carrying case that provides adequate cushion and protection
• External storage device
• HDMI cable
• Lenovo HDMI to VGA Monitor Cable
• Lenovo HDMI to HDMI Cable
• ThinkPad USB 3.0 Ethernet Adapter
If you are traveling to another country, you might need to consider an ac power adapter for the country to
which you are travelling.
To purchase travel accessories, go to http://www.lenovo.com/accessories.

138 User Guide
Appendix A. Regulatory information
Wireless related information

Wireless interoperability
The wireless LAN card is designed to be interoperable with any wireless LAN product that is based on DSSS,
CCK, and/or OFDM radio technology, and is compliant to:
• The 802.11b/g Standard, 802.11a/b/g or 802.11n, 802.11ac on Wireless LANs, as defined and approved
by the Institute of Electrical and Electronics Engineers.
• The WiFi certification as defined by the Wi-Fi Alliance.
A Bluetooth device is designed to be interoperable with any Bluetooth product that is compliant to Bluetooth
Specification 4.0 as defined by the Bluetooth SIG. The following profiles are supported by the Bluetooth
devices:
Note: Depending on the Bluetooth card and the operating system you use, some profiles might not
be available.
• Advanced Audio Distribution Profile (A2DP)
• Audio/Video Control Transport Protocol (AVCTP)
• Audio/Video Distribution Transport Protocol (AVDTP)
• A/V Remote Control Profile (AVRCP)
• Basic Imaging Profile (BIP)
• Basic Printing Profile (BPP)
• Dial-Up Networking Profile (DUN)
• File Transfer Profile (FTP)
• Generic Access Profile (GAP)
• Generic A/V Distribution Profile (GAVDP)
• Hardcopy Cable Replacement Profile (HCRP)
• Headset Profile (HSP)
• Hands-Free Profile (HFP)
• Human Interface Device Profile (HID)
• Message Access Profile (MAP)
• Object Exchange Protocol (OBEX)
• Object Push Profile (OPP)
• Personal Area Networking Profile (PAN)
• Phone Book Access Profile (PBAP)
• Service Discovery Protocol (SDP)
• Synchronization Profile (SYNC)
• Video Distribution Profile (VDP)
• Generic Attribute Profile (GATT)
• Proximity Profile

• Find Me Profile
• Immediate Alert Profile
• Battery Status Profile
Usage environment and your health
Integrated wireless cards emit radio frequency electromagnetic energy like other radio devices. However, the
level of energy emitted is far much less than the electromagnetic energy emitted by wireless devices like
for example mobile phones.
Due to the fact that integrated wireless cards operate within the guidelines found in radio frequency safety
standards and recommendations, Lenovo believes they are safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and result from deliberations of panels
and committees of scientists who continually review and interpret the extensive research literature.
In some situation or environment, the use of integrated wireless cards might be restricted by the proprietor
of the building or responsible representatives of the organization. These situations and areas might for
example include:
• Using the integrated wireless cards on board of airplanes, in hospitals or near petrol stations, blasting
areas (with electro-explosive devices), medical implants or body-worn electronic medical devices, such
as pace makers.
• In any other environment where the risk of interference to other devices or services is perceived or
identified as harmful.
If you are uncertain of the policy that applies to the use of wireless devices in a specific organization (such as
airport or hospital), you are encouraged to ask for authorization to use integrated wireless cards prior to
turning on the computer.
Location of the UltraConnect wireless antennas

ThinkPad notebook computers feature an UltraConnect™ wireless antenna system built into the display for
optimal reception, which enables you to establish wireless communications wherever you are.
140 User Guide

1 Wireless-WAN antenna (auxiliary)
2 Wireless-WAN antenna (main)
3 Wireless-LAN antenna (main)
4 Wireless-LAN antenna (auxiliary)
Locating wireless regulatory notices

For more information about the wireless regulatory notices, refer to the Regulatory Notice shipped with your
computer.
If your computer is shipped without the Regulatory Notice, you can find it on the Web site at:
http://www.lenovo.com/UserManuals
Certification related information

The following table contains information of the product name, compliance ID, and machine types.
Product name Compliance ID Machine types

ThinkPad Yoga 15 TP00070A 20DQ and 20DR
Export classification notice

This product is subject to the United States Export Administration Regulations (EAR) and has an Export
Classification Control Number (ECCN) of 4A994.b. It can be re-exported except to any of the embargoed
countries in the EAR E1 country list.
Appendix A. Regulatory information 141

Electronic emission notices
Federal Communications Commission Declaration of Conformity

The following information refers to the ThinkPad Yoga 15 notebook computer, machine types 20DQ and
20DR.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult an authorized dealer or service representative for help.
Lenovo is not responsible for any radio or television interference caused by using other than specified or
recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Responsible Party:
Lenovo (United States) Incorporated
1009 Think Place - Building One
Morrisville, NC 27560
Phone Number: 919-294-5900
Industry Canada Class B emission compliance statement

CAN ICES-3(B)/NMB-3(B)
European Union - Compliance to the Electromagnetic Compatibility

Directive
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the
approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot
accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modification of the product, including the installation of option cards from other manufacturers.
This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived
for typical residential environments to provide reasonable protection against interference with licensed
communication devices.
142 User Guide

EU contact: Lenovo, Einsteinova 21, 851 01 Bratislava, Slovakia
German Class B compliance statement

Deutschsprachiger EU Hinweis:
Hinweis für Geräte der Klasse B EU-Richtlinie zur Elektromagnetischen Verträglichkeit

Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2004/108/EG (früher 89/336/EWG) zur
Angleichung der Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-Mitgliedsstaaten
und hält die Grenzwerte der EN 55022 Klasse B ein.
Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu
betreiben. Des Weiteren dürfen auch nur von der Lenovo empfohlene Kabel angeschlossen werden.
Lenovo übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt
ohne Zustimmung der Lenovo verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohne
Empfehlung der Lenovo gesteckt/eingebaut werden.
Deutschland:
Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von Betriebsmitteln

Dieses Produkt entspricht dem „Gesetz über die elektromagnetische Verträglichkeit von Betriebsmitteln“
EMVG (früher „Gesetz über die elektromagnetische Verträglichkeit von Geräten“). Dies ist die Umsetzung der
EU-Richtlinie 2004/108/EG (früher 89/336/EWG) in der Bundesrepublik Deutschland.
Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit

von Betriebsmitteln, EMVG vom 20. Juli 2007 (früher Gesetz über die elektromagnetische
Verträglichkeit von Geräten), bzw. der EMV EG Richtlinie 2004/108/EC (früher 89/336/EWG), für
Geräte der Klasse B.
Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen
- CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo
(Deutschland) GmbH, Gropiusplatz 10, D-70563 Stuttgart.
Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4:

Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B.
Class 1 laser compliance statement
This product complies with International Standard EN/IEC 60825-1:2007 edition 2 for a Class 1 laser product.
This product also complies with US FDA performance standards for laser products except for deviations
pursuant to Laser notice No. 50, dated June 24, 2007. Manufactured by Intel Corporation, 2200 Mission
College Blvd., Santa Clara, CA 95054, Model Number: Front F200
Appendix A. Regulatory information 143

Korea Class B compliance statement
Japan VCCI Class B compliance statement
Japan compliance statement for products which connect to the power

mains with rated current less than or equal to 20 A per phase
Lenovo product service information for Taiwan
Eurasian compliance mark
Brazil regulatory notice

Ouvir sons com mais de 85 decibéis por longos períodos pode provocar danos ao sistema auditivo.
Mexico regulatory notice

Advertencia: En Mexico la operación de este equipo estásujeta a las siguientes dos condiciones: (1) es
posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
144 User Guide

Appendix B. WEEE and recycling statements
Lenovo encourages owners of information technology equipment to responsibly recycle their equipment
when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in
recycling their IT products. Information on product recycling offerings can be found on Lenovo's Internet site
at http://www.lenovo.com/social_responsibility/us/en/.
Important WEEE information
The WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for
example, the European WEEE Directive, India E-Waste Management & Handling Rules, 2011). Appliances are
labeled in accordance with local regulations concerning waste electrical and electronic equipment (WEEE).
These regulations determine the framework for the return and recycling of used appliances as applicable
within each geography. This label is applied to various products to indicate that the product is not to be
thrown away, but rather put in the established collection systems for reclaiming these end of life products.
Users of electrical and electronic equipment (EEE) with the WEEE marking must not dispose of end of
life EEE as unsorted municipal waste, but use the collection framework available to them for the return,
recycle, and recovery of WEEE and to minimize any potential effects of EEE on the environment and
human health due to the presence of hazardous substances. For additional WEEE information go to:
http://www.lenovo.com/recycling
Japan recycling statements
Collecting and recycling a disused Lenovo computer or monitor

If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property
of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of
Resources. Computers and monitors are categorized as industrial waste and should be properly disposed
of by an industrial waste disposal contractor certified by a local government. In accordance with the Law
for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and
Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details,
visit the Lenovo Web site at: http://www.lenovo.com/services_warranty/jp/ja/recycle/pcrecycle/.
Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling of
home-used computers and monitors by the manufacturer was begun on October 1, 2003. This service
is provided free of charge for home-used computers sold after October 1, 2003. For details, go to
http://www.lenovo.com/services_warranty/jp/ja/recycle/personal/.

Disposing of Lenovo computer components
Some Lenovo computer products sold in Japan may have components that contain heavy metals or other
environmental sensitive substances. To properly dispose of disused components, such as a printed circuit
board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
Disposing of disused lithium batteries from Lenovo computers

A button-shaped lithium battery is installed inside your Lenovo computer to provide power to the computer
clock while the computer is off or disconnected from the main power source. If you need to replace it with a
new one, contact your place of purchase or contact Lenovo for service. If you need to dispose of a disused
lithium battery, insulate it with vinyl tape, contact your place of purchase or an industrial-waste-disposal
operator, and follow their instructions.
Disposal of a lithium battery must comply with local ordinances and regulations.
Disposing of a disused battery pack from Lenovo notebook computers

Your Lenovo notebook computer has a lithium ion battery pack or a nickel metal hydride battery pack. If you
are a company employee who uses a Lenovo notebook computer and need to dispose of a battery pack,
contact the proper person in Lenovo sales, service, or marketing, and follow that person's instructions. You
also can refer to the instructions at http://www.lenovo.com/jp/ja/environment/recycle/battery/.
If you use a Lenovo notebook computer at home and need to dispose of a battery pack, you
must comply with local ordinances and regulations. You also can refer to the instructions at
http://www.lenovo.com/jp/ja/environment/recycle/battery/.
Recycling information for Brazil
Declarações de Reciclagem no Brasil

Descarte de um Produto Lenovo Fora de Uso
Equipamentos elétricos e eletrônicos não devem ser descartados em lixo comum, mas enviados à pontos de
coleta, autorizados pelo fabricante do produto para que sejam encaminhados e processados por empresas
especializadas no manuseio de resíduos industriais, devidamente certificadas pelos orgãos ambientais, de
acordo com a legislação local.
A Lenovo possui um canal específico para auxiliá-lo no descarte desses produtos. Caso você possua
um produto Lenovo em situação de descarte, ligue para o nosso SAC ou encaminhe um e-mail para:
[email protected], informando o modelo, número de série e cidade, a fim de enviarmos as instruções
para o correto descarte do seu produto Lenovo.
Battery recycling information for the European Union
146 User Guide

Notice: This mark applies only to countries within the European Union (EU).
Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC
concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the
framework for the return and recycling of used batteries and accumulators as applicable throughout the
European Union. This label is applied to various batteries to indicate that the battery is not to be thrown
away, but rather reclaimed upon end of life per this Directive.
In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate
that they are to be collected separately and recycled at end of life. The label on the battery may also
include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for
cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted
municipal waste, but use the collection framework available to customers for the return, recycling, and
treatment of batteries and accumulators. Customer participation is important to minimize any potential
effects of batteries and accumulators on the environment and human health due to the potential presence of
hazardous substances. For proper collection and treatment, go to:
http://www.lenovo.com/recycling
Battery recycling information for Taiwan
Battery recycling information for the United States and Canada
Recycling information for China
Appendix B. WEEE and recycling statements 147

148 User Guide
Appendix C. Restriction of Hazardous Substances Directive
(RoHS)
European Union RoHS

Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic
equipment (“RoHS recast” or “RoHS 2”).
For more information about Lenovo progress on RoHS, go to:

http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.pdf

China RoHS

150 User Guide

Turkish RoHS
The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE).
Ukraine RoHS
India RoHS
RoHS compliant as per E-Waste (Management & Handling) Rules, 2011.
Appendix C. Restriction of Hazardous Substances Directive (RoHS) 151

152 User Guide
Appendix D. ENERGY STAR model information
ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department
of Energy aimed at saving money and protecting the environment through energy efficient products and
practices.
Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation. Lenovo
computers of the following machine type, if the ENERGY STAR mark is affixed, have been designed and
tested to conform to the ENERGY STAR program requirements for computers.
20DQ and 20DR
By using ENERGY STAR qualified products and taking advantage of the power-management features
of your computer, you can help reduce the consumption of electricity. Reduced electrical consumption
can contribute to potential financial savings, a cleaner environment, and the reduction of greenhouse gas
emissions.
For more information about ENERGY STAR, go to:

http://www.energystar.gov
Lenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. To
help in this endeavor, Lenovo has preset the following power-management features to take effect when your
computer has been inactive for a specified length of time:
Power plan: Energy Saver (settings when plugged into ac power)

• Turn off the display: After 10 minutes
• Put the computer into sleep: After 20 minutes
• Advanced power settings:
– Turn off hard disks: After 15 minutes
– Hibernate: Never
To awaken your computer from sleep mode, press the Fn key on your keyboard. For more information about
these settings, see the Windows Help and Support information on your computer.
The Wake on LAN function is enabled when your Lenovo computer is shipped from the factory, and the
setting remains valid even when the computer is in sleep mode. If you do not need to have Wake on LAN
enabled while your computer is in sleep mode, you can reduce the power consumption and prolong the
time in sleep mode, by disabling the setting of Wake on LAN for sleep mode. To disable the setting of
Wake on LAN for sleep mode, do the following:
2. Click Hardware and Sound ➙ Device Manager.
3. In the Device Manager window, expand Network adapters.

4. Right-click your network adapter device, and click Properties.
5. Click the Power Management tab.
6. Clear the Allow this device to wake the computer check box.
7. Click OK.
154 User Guide

Appendix E. Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult
your local Lenovo representative for information on the products and services currently available in your
area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that
Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service
that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's
responsibility to evaluate and verify the operation of any other product, program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in this
document. The furnishing of this document does not give you any license to these patents. You can send
license inquiries, in writing, to:
Lenovo (United States), Inc.
1009 Think Place - Building One
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow
disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply
to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in new editions of the publication.
Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
The products described in this document are not intended for use in implantation or other life support
applications where malfunction may result in injury or death to persons. The information contained in this
document does not affect or change Lenovo product specifications or warranties. Nothing in this document
shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo
or third parties. All information contained in this document was obtained in specific environments and is
presented as an illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in
any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of
the materials for this Lenovo product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled environment. Therefore, the result
obtained in other operating environments may vary significantly. Some measurements may have been
made on development-level systems and there is no guarantee that these measurements will be the same
on generally available systems. Furthermore, some measurements may have been estimated through
extrapolation. Actual results may vary. Users of this document should verify the applicable data for their
specific environment.

Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo
Access Connections
Active Protection System
Rescue and Recovery
Secure Data Disposal
ThinkPad
ThinkPad logo
ThinkVantage
TrackPoint
UltraConnect
Yoga
Intel, Intel SpeedStep, and Intel vPro are trademarks of Intel Corporation in the U. S. and/or other countries.
BitLocker, Microsoft, and Windows are trademarks of the Microsoft group of companies.
The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Other company, product, and service names may be trademarks or service marks of others.
156 User Guide

User Guide Lenovo Yoga s5

Uploaded by

Copyright:

Available Formats

User Guide Lenovo Yoga s5

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

User Guide Lenovo Yoga s5

Uploaded by

Copyright:

Available Formats

User Guide

First Edition (December 2014)

Read this first . . . . . . . . . . . . . . v Trackpad touch gestures . . . . . . . . . 39

© Copyright Lenovo 2014 i

© Copyright Lenovo 2014 iii

Protect yourself from the heat that your computer generates.

Protect yourself from the heat generated by the ac power adapter.

Prevent your computer from getting wet.

Protect the cables from being damaged.

Applying strong force to cables may damage or break them.

Route communication lines, or the cables of an ac power adapter, a mouse, a

© Copyright Lenovo 2014 v

Handle your computer gently.

Carry your computer carefully.

Important safety information

Service and upgrades

© Copyright Lenovo 2014 vii

Power cords and power adapters

viii User Guide

Extension cords and related devices

Plugs and outlets

Power supply statement

© Copyright Lenovo 2014 ix

General battery notice

Notice for built-in rechargeable battery

The following statement applies to users in the state of California, U.S.A.

California Perchlorate Information:

Perchlorate Material - special handling may apply, See

Heat and product ventilation

© Copyright Lenovo 2014 xi

Electrical current safety information

Electric current from power, telephone, and communication cables is hazardous.

To avoid a shock hazard:

xii User Guide

Notices for 3D camera:

Liquid crystal display (LCD) notice

Using headphones or earphones

© Copyright Lenovo 2014 xiii

Additional safety information

Plastic bag notice

Polyvinyl Chloride (PVC) cable and cord notice

xiv User Guide

This chapter contains the following topics:

Locating computer controls, connectors, and indicators

Front view for models with a 2D camera

Figure 1. Front view for models with a 2D camera

1 Ambient light sensor (available on Windows 8.1 based 2 Microphones

5 System-status indicator 6 TrackPoint pointing stick

© Copyright Lenovo 2014 1

9 Speakers 10 Windows Start-screen control

1 Ambient light sensor

5 System-status indicator (illuminated ThinkPad logo)

ThinkPad pointing device

10 Windows Start-screen control

Figure 2. Front view for models with a 3D camera

1 Microphones 2 Ambient light sensor (available on Windows 8.1 based

5 Color camera 6 Infrared laser projector

7 Numeric keypad 8 System-status indicator

9 TrackPoint pointing stick 10 Trackpad