Scribd
Upload
54 views

Sheet Metal K-Factors For Various Combinations of Material Thickness and Bend Radius

This document contains measurements and calculated K-factors for sheet metal bent with various combinations of material thickness and bend radius. It provides the material thickness, bend radius, flat length before bending, lengths of the two bent legs, and calculated K-factor for nine combinations of steel sheet thickness from 0.032 to 0.094 inches and bend radii from 0.0625 to 0.144 inches.

Uploaded by

bhstudent_537083349
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
54 views

Sheet Metal K-Factors For Various Combinations of Material Thickness and Bend Radius

This document contains measurements and calculated K-factors for sheet metal bent with various combinations of material thickness and bend radius. It provides the material thickness, bend radius, flat length before bending, lengths of the two bent legs, and calculated K-factor for nine combinations of steel sheet thickness from 0.032 to 0.094 inches and bend radii from 0.0625 to 0.144 inches.

Uploaded by

bhstudent_537083349
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Sheet Metal K-Factors for Various Combinations of

Material Thickness and Bend Radius

Measured
Bend Flat K-Factor
Material Bent Leg #1 Bent Leg #2
Radius Length (Calculated)
Thickness
0.094 0.0625 4.875 3.03 2.03 0.20
0.094 0.125 4.817 3 2 0.40
0.094 0.144 4.82 3 2 0.47
0.058 0.0625 4.96 3.03 2.03 0.47
0.058 0.125 4.87 3 2 0.44
0.058 0.144 4.875 3 2 0.58
0.032 0.0625 4.99 3.03 2.03 0.41
0.032 0.125 4.91 3 2 0.55
0.032 0.144 4.905 3 2 0.61

Printed: 06/01/2018, 09:16:01


file:///conversion/tmp/scratch/388760975.xls, K-Factors
Page 1 of 1

You might also like