Scribd Logo
Upload

Welcome to Scribd!

  • 72 views

    SY16 Loading Information

    Uploaded by

    Andres Sorin
    Use lifting gear rated for at least the machine's kerb weight of 1,850 kg. Secure the excavator for transport using the four specified lashing points to prevent slipping, turning, or falling. An adhesive label marks the center of gravity location.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SY16 Loading Information

    Uploaded by

    Andres Sorin
    72 views2 pages
    Use lifting gear rated for at least the machine's kerb weight of 1,850 kg. Secure the excavator for transport using the four specified lashing points to prevent slipping, turning, or falling. An adhesive label marks the center of gravity location.

    Original Description:

    sany

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Use lifting gear rated for at least the machine's kerb weight of 1,850 kg. Secure the excavator for transport using the four specified lashing points to prevent slipping, turning, or falling. An adhesive label marks the center of gravity location.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    72 views2 pages

    SY16 Loading Information

    Uploaded by

    Andres Sorin
    Use lifting gear rated for at least the machine's kerb weight of 1,850 kg. Secure the excavator for transport using the four specified lashing points to prevent slipping, turning, or falling. An adhesive label marks the center of gravity location.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Select the lifting gear

    If no lifting gear of the correct rating is available, use


    lifting gear of the next higher rating.

    Technical data:
    V. 07/2017 EN Translation of the original user manual Spare parts number: 534599 Kerb weight [kg] 1,850

    Machine identification number Position of the centre of gravity [mm] 65/100/654

    Loading dimensions (length/width/height) [mm] 3,575/980/2,419


    Product designation: Hydraulic excavator

    Type designation: SY16C Position of the centre of gravity of the machine


    Contact: SANY Europe GmbH
    An adhesive label marks the machine’s centre of
    SANY Allee 1
    gravity.
    DE-50181 Bedburg

    Service number: 00800 88888 318

    WARNING
    Danger of the machine slipping, turning or falling
    Secure the machine:
    • Use a non-slip mat.
    • Only use the specified lashing points.
    • Secure the upper carriage to prevent it from swinging
    (transport safety equipment).
    • Always transport the machine with the maximum track width.
    Lashing points Lashing point specification:
    The machine must be lashed to the transport trailer Lashing force without non-slip pad [daN] 4 x 500
    at all the lashing points that are provided. The
    Lashing point load marking
    lashing points for the machine are marked.
    Number of lashing points 3

    Number of lashing points for means of transport 4

    Lifting the machine

    The machine must be lifted on all lashing


    points that are provided. The lifting points for
    the machine are marked.

    Interfaces:

    Type of contact Metal / non-slip mat

    Contact position Chain on the loading surface

    Type of lashing equipment Chains with chain tensioner

    Vertical lashing angle α [°] 5° < α < 15°

    Horizontal lashing angle β [°] 30° < β < 70°

    Adhesion coefficient of friction 0.6

    You might also like