Cisco Next-Generation Security Solutions All-In-One Cisco ASA Firepower Services, NGIPS, and AMP

1
About This E-Book

EPUB is an open, industry-standard format for e-books. However, support
for EPUB and its many features varies across reading devices and
applications. Use your device or app settings to customize the presentation
to your liking. Settings that you can customize often include font, font size,
single or double column, landscape or portrait mode, and figures that you
can click or tap to enlarge. For additional information about the settings and
features on your reading device or app, visit the device manufacturer’s Web
site.
Many titles include programming code or configuration examples. To

optimize the presentation of these elements, view the e-book in single-
column, landscape mode and adjust the font size to the smallest setting. In
addition to presenting code and configurations in the reflowable text format,
we have included images of the code that mimic the presentation found in
the print book; therefore, where the reflowable format may compromise the
presentation of the code listing, you will see a “Click here to view code
image” link. Click the link to view the print-fidelity code image. To return to
the previous page viewed, click the Back button on your device or app.
2
Cisco Next-Generation Security
Solutions
All-in-one Cisco ASA FirePOWER Services, NGIPS, and AMP
Omar Santos, CISSP No. 463598

Panos Kampanakis, CCIE No. 28561, CISSP No. 367831
Aaron Woland, CCIE No. 20113
800 East 96th Street

Indianapolis, IN 46240
3
Cisco Next-Generation Security Solutions: All-in-one Cisco ASA
FirePOWER Services, NGIPS, and AMP
Omar Santos, CISSP No. 463598
Panos Kampanakis, CCIE No. 28561, CISSP No. 367831
Aaron Woland, CCIE No. 20113
Copyright © 2017 Cisco Systems, Inc.
Cisco Press logo is a trademark of Cisco Systems, Inc.
Published by:
Cisco Press
800 East 96th Street
Indianapolis, IN 46240 USA
All rights reserved. No part of this book may be reproduced or transmitted

in any form or by any means, electronic or mechanical, including
photocopying, recording, or by any information storage and retrieval system,
without written permission from the publisher, except for the inclusion of
brief quotations in a review.
Printed in the United States of America
First Printing: June, 2016
Library of Congress Control Number: 2016939800
ISBN-13: 978-1-58714-446-2
ISBN-10: 1-58714-446-8
Warning and Disclaimer
This book is designed to provide information about Cisco Next-Generation

Security Solutions. Every effort has been made to make this book as
complete and as accurate as possible, but no warranty or fitness is implied.
The information is provided on an “as is” basis. The authors, Cisco Press,
4
and Cisco Systems, Inc. shall have neither liability nor responsibility to any
person or entity with respect to any loss or damages arising from the
information contained in this book or from the use of the discs or programs
that may accompany it.
The opinions expressed in this book belong to the author and are not
necessarily those of Cisco Systems, Inc.
Feedback Information
At Cisco Press, our goal is to create in-depth technical books of the highest
quality and value. Each book is crafted with care and precision, undergoing
rigorous development that involves the unique expertise of members from
the professional technical community.
Readers’ feedback is a natural continuation of this process. If you have any

comments regarding how we could improve the quality of this book, or
otherwise alter it to better suit your needs, you can contact us through email
at [email protected]. Please make sure to include the book title and
ISBN in your message.
We greatly appreciate your assistance.
Trademark Acknowledgments
All terms mentioned in this book that are known to be trademarks or service
marks have been appropriately capitalized. Cisco Press or Cisco Systems,
Inc. cannot attest to the accuracy of this information. Use of a term in this
book should not be regarded as affecting the validity of any trademark or
service mark.
Editor-in-Chief: Mark Taub
Product Line Manager: Brett Bartow
Executive Editor: Mary Beth Ray
Development Editor: Christopher Cleveland
Copy Editor: Kitty Wilson
5
Cover Designer: Chuti Prasertsith
Indexer: James Minkin
Business Operation Manager, Cisco Press: Jan Cornelssen
Managing Editor: Sandra Schroeder
Senior Project Editor: Tracey Croom
Technical Editors: Mason Harris, Foster Lipkey
Composition: Bumpy Design
Proofreader: Kim Wimpsett
Americas Headquarters
Cisco Systems. Inc.
San Jose, CA
Asia Pacific Headquarters

Cisco Systems (USA) Pte. Ltd.
Singapore
Europe Headquarters
Cisco Systems International BV
Amsterdam, The Netherlands
Cisco has more than 200 offices worldwide. Addresses, phone numbers,
and fax numbers are listed on the Cisco Website at
www.cisco.com/go/offices.
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco
Lumin, Cisco Nexus, Cisco Stadium Vision, Cisco Telepresence, Cisco
WebEx, DCE, and Welcome to the Human Network are trademarks;
Changing the Way We Work. Live, Play, and Learn and Cisco Store are
service marks; and Access Registrar, Aironet, AsyncOS. Bringing the
Meeting To You. Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP,
6
CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco
IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems
logo, Cisco Unity, Collaboration Without Limitation, EtherFast,
EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare,
GigaDrive, HomeLink, Internet Quotient, IOS, Phone, iQuick Study,
IronPort, the IronPort logo, LightStream, Linksys, MediaTone,
MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking
Academy. Network Registrar, PCNow, PIX, PowerPanels, ProConnect,
ScriptShare, SenderBase, SMARTnet, Spectrum Expert. StackWise, The
Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the
WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its
affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property
of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (0812R)
7
About the Authors
Omar Santos, CISSP No. 463598, is a principal engineer of Cisco’s
Product Security Incident Response Team (PSIRT), where he mentors and
leads engineers and incident managers during the investigation and
resolution of security vulnerabilities in all Cisco products. Omar has held
information technology and cybersecurity positions since the mid-1990s.
Omar has designed, implemented, and supported numerous secure networks
for Fortune 500 companies and the U.S. government. Prior to his current
role, he was a technical leader within the World Wide Security Practice and
Cisco’s Technical Assistance Center (TAC), where he taught, led, and
mentored many engineers.
Omar is an active member of the security community, where he leads

several industry-wide initiatives and standards bodies. His active role
helps businesses, academic institutions, state and local law enforcement
agencies, and other participants that are dedicated to increasing the security
of critical infrastructure. Omar has delivered numerous technical
presentations at conferences worldwide and to Cisco customers and
partners, and he has given C-level executive presentations to many
organizations. Omar is the author of the following books and video courses:
Cisco ASA: All-in-One Firewall, IPS, and VPN Adaptive Security

Appliance
Cisco ASA: All-in-One Firewall, IPS, Anti-X, and VPN Adaptive Security
Appliance, 2nd edition
Cisco: All-in-One ASA Next-Generation Firewall, IPS, and VPN

Services, 3rd edition
Cisco Network Admission Control, Volume: Deployment and

Management
End-to-End Network Security: Defense-in-Depth
Network Security with NetFlow and IPFIX: Big Data Analytics for
Information Security
8
CCNA Security 210-260 Complete Video Course
CCNA Security 210-260 Official Cert Guide
Deploying Next-Generation Firewalls LiveLessons
The Current Security Threat Landscape Networking Talks LiveLessons
Cisco Advanced Malware Protection (AMP) LiveLessons
Panos Kampanakis, CCIE No. 28561, CISSP No. 367831, is a technical

marketing engineer in Cisco’s Security and Trust Organization (S&TO). He
was born in Athens, Greece, and received a five-year degree in electrical
and computer engineering from National Technical University of Athens and
an MSc from North Carolina State University. His MS thesis was on
efficient elliptic curve cryptography and bilinear pairing on sensor
networks.
Panos has extensive experience with cryptography, security automation,

vulnerability management, and cybersecurity. In his professional career, he
has supported and provided security advice to multiple Cisco customers. He
has trained and presented on various security topics at Cisco Live for
numerous years. He has participated in various security standards bodies,
providing common interoperable protocols and languages for security
information sharing, cryptography, and PKI. Panos has also worked
extensively with Cisco’s PSIRT to provide vulnerability mitigations. His
current interests include next-generation cryptography, post-quantum
cryptography, standards efforts that enable cryptographic implementation
interoperability, and IoT security and cryptography. The following are some
of his recent publications:
Postquantum Preshared Keys for IKEv2 IETF draft

https://tools.ietf.org/html/draft-fluhrer-qr-ikev2
BAFi: A Practical Cryptographic Secure Audit Logging Scheme for

Digital Forensics. Security Comm. Networks, doi: 10.1002/sec.1242
Eric W. Burger, Michael D. Goodman, Panos Kampanakis, and Kevin A.

Zhu. 2014. “Taxonomy Model for Cyber Threat Intelligence Information
Exchange Technologies,” in Proceedings of the 2014 ACM Workshop on
Information Sharing & Collaborative Security(WISCS ‘14). ACM, New
9
York, NY, USA, 51-60
“Security Automation and Threat Information-Sharing Options, Security &

Privacy,” in IEEE, vol.12, no.5, pp.42,51, Sept.-Oct. 2014
Kampanakis, P.; Perros, H.; Beyene, T., SDN-Based Solutions for Moving
Target Defense Network Protection, A World of Wireless, Mobile and
Multimedia Networks (WoWMoM), 2014 IEEE 15th International
Symposium, vol., no., pp.1,6, 19-19 June 2014
IODEF Usage Guidance IETF draft https://tools.ietf.org/html/draft-ietf-

mile-iodef-guidance
Next Generation Encryption on cisco.com
Cisco Firewall Best Practices Guide on cisco.com
In his free time, Panos has a passion for basketball, and he never likes to
lose.
Aaron Woland, CCIE No. 20113, is a principal engineer in Cisco’s

Security Business Group and works with Cisco’s largest customers all over
the world. His primary job responsibilities include secure access and
identity deployments with ISE, solution enhancements, standards
development, and futures. Aaron joined Cisco in 2005 and is currently a
member of numerous security advisory boards and standards body working
groups. Prior to joining Cisco, Aaron spent 12 years as a consultant and
technical trainer. His areas of expertise include network and host security
architecture and implementation, regulatory compliance, and route switch
and wireless. Aaron is one of six inaugural members of the Hall of Fame for
Distinguished Speakers at Cisco Live and is a security columnist for
Network World, where he blogs on all things related to identity. His other
certifications include GHIC, GSEC, Certified Ethical Hacker, MCSE, VCP,
CCSP, CCNP, and CCDP. You can follow Aaron on Twitter @aaronwoland.
Aaron is the author of the following books and courses, as well as many
published white papers and design guides:
CCNP Security SISAS 300-208 Official Cert Guide
Cisco ISE for BYOD and Secure Unified Access
10
CCNA Security 210-260 Complete Video Course
11
About the Technical Reviewers
Foster Lipkey, SFCE, is a senior member of the Cisco Firepower TAC
team supporting Firepower, FireSIGHT, AMP for Endpoints, and Threat
Grid, as well as third-party integrations. He has been a leader in developing
tools and procedures for supporting the Cisco Firepower and AMP security
software platforms. Prior to working for Sourcefire/Cisco, he was an
applications solutions specialist as a contractor for the National Cancer
Institute (NCI), supporting Java enterprise applications for the NCI’s Center
for Biomedical Informatics and Information Technology. Foster’s primary
areas of interest are enterprise security and security automation.
Mason Harris, CCIE No. 5916, is the chief solutions architect at vArmour,
a cloud security startup based in Mountain View, California. He is
responsible for all enterprise and platform architecture in both private and
public cloud deployments. Previously he was a technical solutions architect
for Cisco, focusing primarily on security architectures in the data center
with Cisco’s 27 largest customers. Mason has more than 24 years of
experience in systems architecture and is one the few individuals in the
world to have attained five CCIE certifications. He also holds the CISSP,
GPEN, and GCIH certifications. When not thinking about security topics,
Mason can be found backpacking on long trails or at home with his family.
A lifelong UNC Tarheels fan, he holds an undergraduate degree from UNC-
Chapel Hill and a master’s degree from NC State University, with a minor
in Arabic.
12
Dedications
This work is dedicated to those who aim high and constantly try to move
science and technology forward.
—Panos Kampanakis
I would like to dedicate this book to my lovely wife, Jeannette, and my two
beautiful children, Hannah and Derek, who have inspired and supported me
throughout the development of this book. I also dedicate this book to my
father, Jose, and to the memory of my mother, Generosa. Without their
knowledge, wisdom, and guidance, I would not have the goals that I strive
to achieve today.
—Omar Santos
First and foremost, this book is dedicated to my amazing best friend, fellow
adventurer, and wife, Suzanne. To my two awesome and brilliant children,
Eden and Nyah, and Mom and Pop. There is nothing in this world more
important than family, and my family drives me to be better and do better,
every day.
—Aaron Woland
13
Acknowledgments
We would like to thank the technical editors, Foster Lipkey and Mason
Harris, for their time and technical expertise. They verified our work and
corrected us in all the major and minor mistakes that were hard to find, and
they steered us in new directions and to achieve more.
We would like to thank the Cisco Press team, especially Denise Lincoln and
Christopher Cleveland, for their patience, guidance, and consideration.
Their efforts are greatly appreciated.
Kudos to the Cisco Security Business Group and Cisco Security Services
for delivering such great products and services.
Finally, we would like to thank Cisco for enabling us to constantly learn and
chase our career aspirations all these years.
14
Contents at a Glance
Introduction
Chapter 1 Fundamentals of Cisco Next-Generation Security
Chapter 2 Introduction to and Design of Cisco ASA with FirePOWER

Services
Chapter 3 Configuring Cisco ASA with FirePOWER Services
Chapter 4 Troubleshooting Cisco ASA with FirePOWER Services and

Firepower Threat Defense (FTD)
Chapter 5 Introduction to and Architecture of Cisco AMP
Chapter 6 Cisco AMP for Networks
Chapter 7 Cisco AMP for Content Security
Chapter 8 Cisco AMP for Endpoints
Chapter 9 AMP Threat Grid: Malware Analysis and Threat Intelligence
Chapter 10 Introduction to and Deployment of Cisco Next-Generation IPS
Chapter 11 Configuring Cisco Next-Generation IPS
Chapter 12 Reporting and Troubleshooting with Cisco Next-Generation IPS
Index
15
Contents
Introduction
Chapter 1 Fundamentals of Cisco Next-Generation Security
The New Threat Landscape and Attack Continuum
The Attack Continuum
Cisco ASA 5500-X Series Next-Generation Firewalls and the Cisco ASA
with FirePOWER Services
Cisco Firepower Threat Defense (FTD)
Cisco Firepower 4100 Series
Cisco FTD for Cisco Integrated Services Routers (ISRs)
Next-Generation Intrusion Prevention Systems (NGIPS)
Firepower Management Center
AMP for Endpoints
AMP for Networks
AMP Threat Grid
Email Security Overview
Email Security Appliance
Cloud Email Security
Cisco Hybrid Email Security
Web Security Overview
16
Web Security Appliance
Cisco Security Management Appliance
Cisco Cloud Web Security (CWS)
Cisco Identity Services Engine (ISE)
Cisco Meraki Cloud-Managed MDM
Cisco Meraki Cloud-Managed Security Appliances
Cisco VPN Solutions
Summary
Chapter 2 Introduction to and Design of Cisco ASA with FirePOWER

Services
Introduction to Cisco ASA FirePOWER Services
Inline versus Promiscuous Mode
Inline Mode
Promiscuous Monitor-Only Mode
Cisco ASA FirePOWER Management Options
Accessing the Cisco ASA FirePOWER Module Management Interface in

Cisco ASA 5585-X Appliances
Accessing the Cisco ASA FirePOWER Module Management Interface in

Cisco ASA FirePOWER Services Sizing
Cisco ASA FirePOWER Services Licensing
The Protection License
The Control License
17
The URL Filtering License
The Malware License
Viewing the Installed Cisco ASA FirePOWER Module Licenses
Adding a License to the Cisco ASA FirePOWER Module
Cisco ASA FirePOWER Compatibility with Other Cisco ASA Features
Cisco ASA FirePOWER Packet Processing Order of Operations
Cisco ASA FirePOWER Services and Failover
What Happens When the Cisco ASA FirePOWER Module Fails?
Cisco ASA FirePOWER Services and Clustering
Cluster Member Election
How Connections Are Established and Tracked in a Cluster
How a New TCP Connection Is Established and Tracked in a Cluster
How a New UDP-Like Connection Is Established and Tracked in a

Cluster
Centralized Connections in a Cluster
What Happens When the Flow Owner Fails
Deploying the Cisco ASA FirePOWER Services in the Internet Edge
Deploying the Cisco ASA FirePOWER Services in VPN Scenarios
Deploying Cisco ASA FirePOWER Services in the Data Center
Summary
Chapter 3 Configuring Cisco ASA with FirePOWER Services
18
Setting Up the Cisco ASA FirePOWER Module in Cisco ASA 5585-X
Appliances
Installing the Boot Image and Firepower System Software in the Cisco ASA
5585-X SSP
Setting Up the Cisco ASA FirePOWER Module in Cisco ASA 5500-X

Appliances
Installing the Boot Image and Firepower System Software in the SSD of
Configuring of Cisco ASA 5506-X, 5508-X, and 5516-X Appliances
Uploading ASDM
Setting Up the Cisco ASA to Allow ASDM Access
Accessing the ASDM
Setting Up a Device Name and Passwords
Configuring an Interface
Configuring the Cisco ASA to Redirect Traffic to the Cisco ASA

FirePOWER Module
Configuring the Cisco ASA FirePOWER Module for the FMC
Configuring the Cisco ASA FirePOWER Module Using the ASDM
Configuring Access Control Policies
Creating a New Access Control Policy
Adding Rules to the Access Control Policy
Security Intelligence
HTTP Responses
Access Control Policy Advanced Settings
19
Configuring Intrusion Policies
Custom Rules
Configuring File Policies
Reusable Object Management
Keeping the Cisco FirePOWER Module Up-to-Date
Firepower Threat Defense
Installing FTD Boot Image and Software
FTD Firewall Mode
FTD Interface Types
FTD Security Zones
Static and Dynamic Routing in FTD
Summary
Chapter 4 Troubleshooting Cisco ASA with FirePOWER Services and

Useful show Commands
Displaying the Access Control Policy Details
Displaying the Network Configuration
Monitoring Storage Usage
Analyzing Running Processes
Using the System Log (Syslog)
Monitoring and Troubleshooting System Tasks
Generating Advanced Troubleshooting Logs
20
Useful ASA Debugging Commands
Summary
Chapter 5 Introduction to and Architecture of Cisco AMP
Introduction to Advanced Malware Protection (AMP)
Role of the AMP Cloud
Doing Security Differently
The Prevention Framework
1-to-1 Signatures
Ethos Engine
Spero Engine
Indicators of Compromise
Device Flow Correlation
Advanced Analytics
Dynamic Analysis with Threat Grid
The Retrospective Framework
The Cloud
Private Cloud
Cloud Proxy Mode
Air Gap Mode
Installing the Cisco AMP Private Cloud
Summary
Chapter 6 Cisco AMP for Networks
21
Introduction to Advanced Malware Protection (AMP) for Networks
What Is That Manager Called, Anyway?
Form Factors
What Does AMP for Networks Do?
Where Are the AMP Policies?
File Rules
Advanced File Policies
Summary
Chapter 7 Cisco AMP for Content Security
Introduction to AMP for Content Security
Content Security Connectors
Configuring Cisco AMP for Content Security
Configuring the Web Security Appliance (WSA) for AMP
Configuring the Email Security Appliance (ESA) for AMP
AMP Reports
Summary
Chapter 8 Cisco AMP for Endpoints
Introduction to AMP for Endpoints
What Is AMP for Endpoints?
Connections to the AMP Cloud
Firewalls, Destinations, and Ports, Oh My!
Outbreak Control
22
Custom Detections
Simple Custom Detections
Advanced Custom Detections
Android Custom Detections
IP Blacklists and Whitelists
Application Control
Exclusion Sets
The Many Faces of AMP for Endpoints
AMP for Windows
Windows Policies
General Tab
File Tab
Network Tab
Known Incompatible Software
AMP for Mac
MAC Policies
General Tab
File Tab
Network Tab
AMP for Linux
Linux Policies
General Tab
23
File Tab
Network Tab
AMP for Android
Installing AMP for Endpoints
Groups, Groups, and More Groups
Download Connector
Distributing via Cisco AnyConnect
Installing AMP for Windows
Installing AMP for Mac
Installing AMP for Linux
Installing AMP for Android
Android Activation Codes
Deploying the AMP for Android Connector
Proxy Complications
Proxy Server Autodetection
Incompatible Proxy Security Configurations
Using the Cloud Console
Summary
Chapter 9 AMP Threat Grid: Malware Analysis and Threat Intelligence
Cisco AMP Threat Grid
Cisco AMP Threat Grid Cloud Solution
Cisco AMP Threat Grid On-Premises Appliance
24
Default Users
Network Segment Configuration
Summary
Chapter 10 Introduction to and Deployment of Cisco Next-Generation

IPS
NGIPS Basics
Legacy IPS Versus NGIPS
Cisco NGIPS Capabilities
NGIPS Modes
NGIPS Deployment Locations and Scenarios
NGIPS Deployment Design Considerations
Threat Management and System Capabilities
Flow Handling
Scale and Availability
Management Platform Integration
Licensing and Cost
NGIPS Deployment Lifecycle
Policy Definition
Product Selection and Planning
Implementation and Operation
Evaluation and Control
Summary
25
Chapter 11 Configuring Cisco Next-Generation IPS
Policy
Policy Layers
Variables
Configuring a Cisco Firepower Intrusion Policy
Committing a Policy
Snort Rules
Rule Anatomy
Rule Headers
Rule Body
Writing a Rule
Managing Snort Rules in FMC
Cisco NGIPS Preprocessors
Firepower Recommendations
Performance Settings
Stack/Cluster
Summary
Chapter 12 Reporting and Troubleshooting with Cisco Next-Generation

IPS
Analysis
Intrusion Events
Intrusion Event Workflows
26
Reports
Incidents
Alerts
SNMP Alerts
Email Alerts
Syslog Alerts
Correlation Policies
Troubleshooting
Audit
Health Monitoring
Syslogs
Summary
Index
27
Introduction
This book covers Cisco next-generation network security products and
solutions. It provides detailed guidance for designing, configuring, and
troubleshooting the Cisco ASA with FirePOWER Services, Cisco next-
generation IPS appliances, Cisco Web Security Appliance (WSA), and
Cisco Email Security Appliance (ESA) with the new Advanced Malware
Protection (AMP) integration, as well as the Cisco AMP Threat Grid
malware analysis and threat intelligence and Cisco Firepower Management
Center (FMC).
Who Should Read This Book?
This book is a comprehensive guide for any network and/or security

professional who has deployed or is planning to deploy Cisco next-
generation security products, including the Cisco ASA with FirePOWER
Services, Cisco AMP for Networks and Endpoints, and Cisco next-
generation IPS appliances (including Firepower). Any security professional
who manages or configures Cisco Web Security Appliance (WSA) and
Cisco Email Security Appliance (ESA) with the Advanced Malware
Protection (AMP) solution will also benefit from this book.
How This Book Is Organized

This book is organized into 12 chapters. It starts with an overview of the
Cisco next- generation network security products and then dives into design,
configuration, and troubleshooting of the Cisco ASA FirePOWER Services
module, Cisco AMP for Networks, Cisco AMP for Endpoints, Cisco AMP
for Content Security, and Cisco next-generation IPS. This book also
provides an overview of the Cisco AMP Threat Grid mal-ware analysis and
threat intelligence. The following are the chapters in this book:
Chapter 1, “Fundamentals of Cisco Next-Generation Security”: This

chapter starts with an introduction to the new security threat landscape and
attack continuum. It then provides an overview of Cisco next-generation
network security products, including the Cisco ASA next-generation
firewalls and the FirePOWER module; next-generation intrusion prevention
systems (NGIPS); an introduction to Advanced Malware Protection (AMP)
28
for Endpoints and AMP for Networks; an overview of AMP Threat Grid;
Cisco Email Security; Cisco Web Security; Cisco Identity Services Engine
(ISE); Cisco Meraki Cloud Managed MDM and Security Appliances; and
the Cisco VPN solutions.
Chapter 2, “Introduction to and Design of Cisco ASA with

FirePOWER Services”: This chapter covers design topics of the Cisco
ASA with FirePOWER Services. It explains the inline versus promiscuous
mode deployment and the Cisco ASA Firepower management options. This
chapter also provides information about the Cisco ASA FirePOWER
Services licensing structure and information about compatibility with other
Cisco ASA features. It also covers the Cisco ASA Firepower packet
processing order of operations, high-availability design topics, and how to
deploy the Cisco ASA FirePOWER Services in the Internet edge, in the data
center, and in different VPN scenarios.
Chapter 3, “Configuring Cisco ASA with FirePOWER Services”: This

chapter starts with instructions on how to perform the initial setup of the
Cisco ASA FirePOWER module in Cisco ASA appliances. Then it provides
step-by-step configuration guidance on how to redirect traffic to the Cisco
ASA FirePOWER module, how to configure the Cisco ASA FirePOWER
module using the Adaptive Security Device Manager (ASDM), and how to
configure the Cisco ASA FirePOWER module for FireSIGHT Management.
Chapter 4, “Troubleshooting Cisco ASA with FirePOWER Services

and Firepower Threat Defense (FTD)”: This chapter provides tips on
troubleshooting problems in the Cisco ASA and the FirePOWER Services
module.
Chapter 5, “Introduction to and Architecture of Cisco AMP”: This

chapter introduces the Advanced Malware Protection solution, its
architectural makeup, and types of clouds. It also provides a step-by-step
walk-through for installing an AMP private cloud.
Chapter 6, “Cisco AMP for Networks”: This chapter describes how

AMP for Networks fits into the AMP architecture, along with the functions
of AMP for Networks. It describes and walks through the configuration of
malware and file policies for AMP for Networks.
Chapter 7, “Cisco AMP for Content Security”: This chapter describes
29
how AMP for Content Security fits within the AMP architecture, describing
the components and configuration of File Reputation and File Analysis
Services, along with the reporting for those services.
Chapter 8, “Cisco AMP for Endpoints”: This chapter dives into Cisco
AMP for Endpoints, custom detections, application control, AMP for
Endpoints installation, and policy management for applicable operating
systems (Windows, Mac, Linux, and Android). The chapter also reviews the
usage of the AMP cloud console.
Chapter 9, “AMP Threat Grid: Malware Analysis and Threat

Intelligence”: AMP Threat Grid is a malware dynamic analysis engine
integrated with Cisco AMP. This chapter presents the AMP Threat Grid
deployment options, which include a cloud and an on-premises appliance
solution. It summarizes the differences between the two and describes when
an organization would choose one over the other. It also provides example
snapshots of Threat Grid configuration options in the FMC.
Chapter 10, “Introduction and Deployment of Cisco Next-Generation

IPS”: This chapter presents next-generation IPS (NGIPS) and compares
NGIPS to legacy IPS systems. It also describes some basic NGIPS
deployment design options and locations based on an organization’s security
requirements. This chapter then goes over common deployment
considerations when designing an IPS deployment. Finally, it closes by
going over the NGIPS deployment lifecycle that organizations should follow
in order to maximize the benefits of an NGIPS deployment.
Chapter 11, “Configuring Cisco Next-Generation IPS”: This chapter

introduces the configuration options available in FMC. It presents policy
configuration options, IPS rules, Snort, and NGIPS preprocessors and
recommendations. It uses various snapshot images to portray the wealth of
available configuration options and the intuitive feel of the FMC graphical
interface. Finally, it describes performance settings and redundancy
configurations. This chapter does not present the ASDM IPS configuration
options, which are presented in Chapter 3.
Chapter 12, “Reporting and Troubleshooting with Cisco Next-

Generation IPS”: The last chapter of this book summarizes the Cisco
NGIPS reporting and troubleshooting capabilities. It describes the analysis
capabilities offered in FMC, which include intrusion events, custom
30
reporting, incidents, alerting, and correlation policies. It then provides
troubleshooting and health monitoring options that help administrators
identify and find the root cause of potential issues in the system.
Command Syntax Conventions
The conventions used to present command syntax in this book are the same
conventions used in the IOS Command Reference:
Boldface indicates commands and keywords that are entered literally as

shown. In actual configuration examples and output (not general command
syntax), boldface indicates commands that are manually input by the user
(such as a show command).
Italics indicate arguments for which you supply actual values.
Vertical bars ( | ) separate alternative, mutually exclusive elements.
Square brackets [ ] indicate optional elements.
Braces { } indicate a required choice.
Braces within brackets [{ }] indicate a required choice within an optional

element.
31
Chapter 1. Fundamentals of Cisco Next-
Generation Security
The threat landscape today is very different from that of just a few years
ago. Many bad actors are causing major disruptions to enterprises, service
providers, and governments with a combination of simple attacks and very
sophisticated, well-organized, and well-funded attack campaigns. A large
number of these advanced attacks are difficult to detect and remain in
networks for long periods of time.
Traditional security products have concentrated on providing high-level

visibility into what’s happening in the network and denying traffic at the
point of entry. However, bad actors do not carry out advanced attacks at a
single point in time. Their attack schemes and campaigns use sophisticated
methodologies like encrypted traffic, zero-day attacks, command and control
(C&C) detection evasion, lateral movement, and evasion techniques to
avoid detection.
Cisco creates some of the industry’s most comprehensive advanced threat

protection security products and services. These products and solutions are
designed to provide visibility, policy enforcement, and advanced threat
protection across a network and the entire attack continuum. This chapter
covers the following topics and Cisco next-generation security products and
solutions:
The new threat landscape and attack continuum
Cisco ASA 5500-X Series next-generation firewalls and the Cisco ASA
with FirePOWER Services
Next-generation intrusion prevention systems (NGIPS)
Firepower Management Center (FMC)
Advanced Malware Protection (AMP) for Endpoints
AMP for Networks
32
AMP Threat Grid
Cisco Email Security Appliance (ESA)
Cisco Web Security Appliance (WSA)
Cisco Meraki cloud-managed MDM
Cisco Meraki cloud-managed security appliances
Cisco VPN solutions
Note
This book focuses on the latest next-generation platforms.
The New Threat Landscape and Attack Continuum
Defending against cybersecurity attacks is becoming more challenging every

day, and it is not going to get any easier. The threat landscape is evolving to
a faster, more effective, and more efficient criminal economy profiting from
attacks against users, enterprises, services providers, and governments. The
organized cybercrime and exchange of exploits is booming and fueling a
very lucrative economy. Bad actors today have a clear understanding of the
underlying security technologies and their vulnerabilities. Hacker groups
now follow software development lifecycles, just as enterprises do. These
bad actors perform quality assurance testing against security products
before releasing them into the underground economy. They continue to find
ways to evade common security defenses. Attackers follow new techniques
such as the following:
Port and protocol hopping
Encryption
33
Droppers
Social engineering
Zero-day attacks
Figure 1-1 illustrates how today’s security defenses must be architected.
Figure 1-1 Today’s Security Defenses
Next-generation security defenses must have the following characteristics:
Visibility driven: Defenses must maintain complete visibility and gather

data from all potential attack vectors across the network fabric, endpoints
(including mobile devices), email and web gateways, virtual machines in
the data center, and the cloud.
Threat focused: It is necessary to correlate all collected information with

indicators of compromise (IOC) and other contextual information in order
for network security administrators to make better decisions and take action.
Keeping up with a constantly evolving threat landscape is almost
impossible. Access controls reduce the attack surface, but attackers still get
through. Security technologies and solutions must focus on understanding,
detecting, and blocking attacks. These solutions require continuous analysis
and security intelligence delivered from the cloud and shared across all
products for better effectiveness.
Platform based: Security now requires an integrated system of agile and
34
open platforms that cover the network, endpoints, users, and the cloud.
These platforms must be scalable and centrally managed for device
configuration consistency.
The Attack Continuum
You as a security professional need to face the fact that you will get
attacked, and eventually some of the devices in your network will be
compromised. Security technologies and processes not only should focus on
detection but also should provide the capability to mitigate the impact of a
successful attack. Figure 1-2 illustrates the attack continuum.
Figure 1-2 The Attack Continuum
Security professionals must maintain visibility and control across the

extended network during the full attack continuum:
Before an attack takes place
During an active attack
After an attacker starts to damage systems or steal information
Cisco next-generation security products provide protection throughout the

attack continuum. Devices such as the Cisco ASA with FirePOWER
Services, available on the Cisco ASA 5500-X Series and ASA 5585-X
Adaptive Security Appliances; Firepower Threat Defense (FTD); and Cisco
Advanced Malware Protection (AMP) provide a security solution that help
discover threats and enforce and harden policies before an attack takes
place. In addition, you can detect, block, and defend against attacks that
35
have already taken place with next-generation intrusion prevention systems
(NGIPS), Email Security, and Web Security Appliance with AMP. These
solutions provide the capabilities to contain and remediate an attack to
minimize data loss and additional network degradation.
Tip
What is the difference between FirePOWER and Firepower? Cisco uses the
term FirePOWER (uppercase POWER) when referring to the Cisco ASA
FirePOWER Services module and uses Firepower (lowercase power) when
referring to the FTD unified image and newer software.
Cisco ASA 5500-X Series Next-Generation Firewalls and the

Cisco ASA with FirePOWER Services
The members of the Cisco ASA family come in many shapes and sizes, but
they all provide a similar set of features. Typically, smaller model numbers
represent smaller capacity for throughput. The main standalone appliance
model number begins with a 55, but there are also devices in the Cisco ASA
family that go into a switch, such as a 6500. Table 1-1 describes the various
models of the ASA family.
36
Table 1-1 Cisco ASA Models
The Cisco ASA family provides a very comprehensive set of features and
next-generation security capabilities. For example, it provides capabilities
such as simple packet filtering (normally configured with access control
lists [ACLs]) and stateful inspection. The Cisco ASA family also provides
support for application inspection/awareness. A Cisco ASA device can
listen in on conversations between devices on one side and devices on the
other side of the firewall. The benefit of listening in is that the firewall can
pay attention to application layer information.
The Cisco ASA family also supports Network Address Translation (NAT),
the capability to act as a Dynamic Host Configuration Protocol (DHCP)
server or client or both. The Cisco ASA family supports most of the interior
gateway routing protocols, including Routing Information Protocol (RIP),
Enhanced Interior Gateway Routing Protocol (EIGRP), and Open Shortest
Path First (OSPF). It also supports static routing. A Cisco ASA device also
can be implemented as a traditional Layer 3 firewall, which has IP
addresses assigned to each of its routable interfaces. The other option is to
37
implement a firewall as a transparent (Layer 2) firewall, in which case the
actual physical interfaces are not configured with individual IP addresses,
but a pair of interfaces operate like a bridge. Traffic that is going across this
two-port bridge is still subject to the rules and inspection that can be
implemented by the ASA. In addition, a Cisco ASA device is often used as
a head-end or remote-end device for VPN tunnels for both remote-access
VPN users and site-to-site VPN tunnels. The Cisco ASA family supports
IPsec and SSL-based remote-access VPNs. The SSL VPN capabilities
include support for clientless SSL VPN and full AnyConnect SSL VPN
tunnels.
The Cisco ASA family also provides a basic botnet traffic filtering feature.
A botnet is a collection of computers that have been compromised and are
willing to follow the instructions of someone who is attempting to centrally
control them (for example, 200,000 machines all willing [or so
commanded] to send a flood of ping requests to the IP address dictated by
the person controlling these devices). Often, users of these computers have
no idea that their computers are participating in a coordinated attack. An
ASA device works with an external system at Cisco that provides
information about the Botnet Traffic Filter Database and so can protect
against such attacks.
Cisco introduced the Cisco ASA FirePOWER module as part of the

integration of the Sourcefire technology.
Note
Cisco acquired the company Sourcefire to expand its security portfolio. The
Cisco ASA FirePOWER module provides NGIPS, Application Visibility
and Control (AVC), URL filtering, and AMP. This module runs as a separate
application from the classic Cisco ASA software. The Cisco ASA
FirePOWER module can be a hardware module on the ASA 5585-X only or
a software module that runs in an SSD in all other models.
The Cisco ASA FirePOWER module can be managed by the Firepower

Management Center (FMC), formerly known as the FireSIGHT Management
Center. The Firepower Management Center and the Cisco ASA FirePOWER
module require additional licenses. In all Cisco ASA models except the
5506-X, 5508-X, and 5516-X, the licenses are installed in the FirePOWER
38
module. There are no additional licenses required in a Cisco ASA device.
FirePOWER Services running on the Cisco ASA 5506-X, 5508-X, and
5516-X can be managed using Adaptive Security Device Manager (ASDM),
and the licenses can be installed using ASDM. In all Cisco ASAs with
FirePOWER Services managed by a Firepower Management Center, the
license is installed on the Firepower Management Center and used by the
module.
Chapter 2, “Introduction to and Design of Cisco ASA with FirePOWER

Services,” provides a more technical introduction to the Cisco ASA with
FirePOWER Services, as well as design guidelines and best practices.
Chapter 3, “Configuring Cisco ASA with FirePOWER Services,” provides
step-by-step instructions on how to configure the Cisco ASA with
FirePOWER Services, and Chapter 4, “Troubleshooting Cisco ASA with
FirePOWER Services and Firepower Threat Defense (FTD),” provides
detailed instructions and tips on how to troubleshoot Cisco ASA with
FirePOWER Services deployments.
Note
Cisco ASA 5500-X Series Next-Generation Firewalls LiveLessons

(Workshop): Deploying and Troubleshooting Techniques (ISBN 978-1-
58720-570-5) provides step-by-step instructions on how to deploy,
configure, and troubleshoot the firewall features of the Cisco ASA 5500-X
Series Next-Generation Firewalls, including an introduction to Cisco ASA
with FirePOWER Services.
The Cisco Press book Cisco ASA: All-in-One Next-Generation Firewall,

IPS, and VPN Services, third edition (ISBN 978-1-58714-307-6), provides
an all-in-one guide to the Cisco ASA. Both of these publications provide
guidance on how to install, configure, license, maintain, and troubleshoot
the newest ASA devices. You learn how to implement authentication,
authorization, and accounting (AAA) services, control and provision
network access with packet filtering, use context-aware Cisco ASA next-
generation firewall services, and take advantage of new NAT/PAT concepts.
These publications also provide guidance on how to configure IP routing,
application inspection, and QoS and how to implement high availability
with failover and elastic scalability with clustering. Cisco ASA: All-in-One
39
Next-Generation Firewall, IPS, and VPN Services, third edition, covers the
configuration and troubleshooting of site-to-site IPsec VPNs and all forms
of remote-access VPNs (IPsec, clientless SSL, and client-based SSL).
The Cisco FTD is unified software that includes Cisco ASA features, legacy
FirePOWER Services, and new features. FTD can be deployed on Cisco
Firepower 4100 and 9300 appliances to provide next-generation firewall
(NGFW) services. In addition to being able to run on the Cisco Firepower
4100 Series and the Firepower 9300 appliances, FTD can also run natively
on the ASA 5506-X, ASA 5506H-X, ASA 5506W-X, ASA 5508-X, ASA
5512-X, ASA 5515-X, ASA 5516-X, ASA 5525-X, ASA 5545-X, and ASA
5555-X. It is not supported in the ASA 5505 or the 5585-X.
The Cisco Firepower 4100 Series appliances are next-generation firewalls

that run the Cisco FTD software and features. There are four models:
Cisco Firepower 4110, which supports up to 20 Gbps of firewall

throughput

throughput

throughput
Cisco Firepower 4150, which supports over 60 Gbps of firewall

throughput
All of the Cisco Firepower 4100 Series models are one rack-unit (1 RU)
appliances and are managed by the Cisco Firepower Management Center.
The Cisco Firepower 9300 appliances are designed for very large
enterprises or service providers. They can scale beyond 1 Tbps and are
designed in a modular way, supporting Cisco ASA software, Cisco FTD
40
software, and Radware DefensePro DDoS mitigation software.
Note
The Radware DefensePro DDoS mitigation software is available and

supported directly from Cisco on Cisco Firepower 4150 and Cisco
Firepower 9300 appliances.
Radware’s DefensePro DDoS mitigation software provides real-time

analysis to protect the enterprise or service provider infrastructure against
network and application downtime due to distributed denial of service
(DDoS) attacks.
Cisco FTD for Cisco Integrated Services Routers (ISRs)
The Cisco FTD can run on Cisco Unified Computing System (UCS) E-
Series blades installed on Cisco ISR routers. Both the FMC and FTD are
deployed as virtual machines. There are two internal interfaces that connect
a router to an UCS E-Series blade. On ISR G2, Slot0 is a Peripheral
Component Interconnet Express (PCIe) internal interface, and UCS E-Series
Slot1 is a switched interface connected to the backplane Multi Gigabit
Fabric (MGF). In Cisco ISR 4000 Series routers, both internal interfaces
are connected to the MGF.
A hypervisor is installed on the UCS E-Series blade, and the Cisco FTD
software runs as a virtual machine on it. FTD for ISRs is supported on the
following platforms:
Cisco ISR G2 Series: 2911, 2921, 2951, 3925, 3945, 3925E, and 3945E
Cisco ISR 4000 Series: 4331, 4351, 4451, 4321, and 4431
Next-Generation Intrusion Prevention Systems (NGIPS)

As a result of the Sourcefire acquisition, Cisco expanded its NGIPS
portfolio with the following products:
Cisco FirePOWER 8000 Series appliances: These high-performance
41
appliances running Cisco FirePOWER Next-Generation IPS Services
support throughput speeds from 2 Gbps up through 60 Gbps.
Cisco FirePOWER 7000 Series appliances: These are the base platform
for the Cisco FirePOWER NGIPS software. Base platforms support
throughput speeds from 50 Mbps up through 1.25 Gbps.
Virtual next-generation IPS (NGIPSv) appliances for VMware: These

appliances can be deployed in virtualized environments. By deploying these
virtual appliances, security administrators can maintain network visibility
that is often lost in virtual environments.
Chapter 10, “Introduction to and Deployment of Cisco Next-Generation

IPS,” provides a more technical introduction of the Cisco NGIPS
appliances. Chapter 11, “Configuring Cisco Next-Generation IPS,” provides
step-by-step instructions on how to configure Cisco NGIPS appliances, and
Chapter 12, “Reporting and Troubleshooting with Cisco Next-Generation
IPS,” provides detailed instructions and tips on how to troubleshoot Cisco
NGIPS deployments.
Cisco Firepower Management Center (FMC) provides a centralized

management and analysis platform for the Cisco NGIPS appliances and the
Cisco ASA with FirePOWER Services. It provides support for role-based
policy management and includes a fully customizable dashboard with
advanced reports and analytics. The following are the models of the Cisco
FMC appliances:
FS750: Supports a maximum of 10 managed devices (NGIPS or Cisco

ASA appliances) and a total of 20 million IPS events.
FS2000: Supports a maximum of 70 managed devices and up to 60 million

IPS events.
FS4000: Supports a maximum of 300 managed devices and a total of 300

million IPS events.
FMC Virtual Appliance: Allows you to conveniently provision on your

existing virtual infrastructure. It supports a maximum of 25 managed devices
42
and up to 10 million IPS events.
AMP for Endpoints
There are numerous antivirus and antimalware solutions on the market,

designed to detect, analyze, and protect against both known and emerging
endpoint threats. Before diving into these technologies, you should
understand viruses and malicious software (malware). The following are
the most common types of malicious software:
Computer virus: Malicious software that infects a host file or system area
to perform undesirable outcomes such as erasing data, stealing information,
or corrupting the integrity of the system. In numerous cases, these viruses
multiply again to form new generations of themselves.
Worm: A virus that replicates itself over the network, infecting numerous
vulnerable systems. In most cases, a worm executes malicious instructions
on a remote system without user interaction.
Mailer or mass-mailer worm: A type of worm that sends itself in an

email message. Examples of mass-mailer worms are Loveletter.A@mm and
W32/SKA.A@m (a.k.a. the Happy99 worm), which sends a copy of itself
every time the user sends a new message.
Logic bomb: A type of malicious code that is injected into a legitimate

application. An attacker can program a logic bomb to delete itself from the
disk after it performs the malicious tasks on the system. Examples of these
malicious tasks include deleting or corrupting files or databases and
executing a specific instruction after certain system conditions are met.
Trojan horse: A type of malware that executes instructions to delete files,

steal data, or otherwise compromise the integrity of the underlying operating
system. Trojan horses typically use a form of social engineering to fool
victims into installing such software in their computers or mobile devices.
Trojans can also act as back doors.
Back door: A piece of malware or a configuration change that allows

attackers to control the victim’s system remotely. For example, a back door
can open a network port on the affected system so that the attacker can
connect and control the system.
43
Exploit: A malicious program designed to exploit, or take advantage of, a
single vulnerability or set of vulnerabilities.
Downloader: A piece of malware that downloads and installs other

malicious content from the Internet to perform additional exploitation on an
affected system.
Spammer: Malware that sends spam, or unsolicited messages sent via

email, instant messaging, newsgroups, or any other kind of computer or
mobile device communications. Spammers send these unsolicited messages
with the primary goal of fooling users to click malicious links, reply to
emails or other messages with sensitive information, or perform different
types of scams. The attacker’s main objective is to make money.
Key logger: A piece of malware that captures the user’s keystrokes on a

compromised computer or mobile device. It collects sensitive information,
such as passwords, personal ID numbers (PINs), personal identifiable
information (PII), credit card numbers, and more.
Rootkit: A set of tools used by an attacker to elevate his or her privilege

to obtain root-level access to be able to completely take control of the
affected system.
Ransomware: A type of malware that compromises a system and then

demands a ransom from the victim to pay the attacker in order for the
malicious activity to cease or for the malware to be removed from the
affected system. Two examples of ransomware are Crypto Locker and
CryptoWall, and they encrypt the victim’s data and demand that the user pay
a ransom in order for the data to be decrypted and accessible to the victim.
There are numerous types of commercial and free antivirus software. The
following are a few examples of commercial and free options:
Avast
AVG Internet Security
Bitdefender Antivirus Free
ZoneAlarm PRO ANTIVIRUS+, ZoneAlarm PRO FIREWALL, and

ZoneAlarm EXTREME SECURITY
44
F-Secure Anti-virus
Kaspersky Anti-virus
McAfee AntiVirus
Panda Antivirus
Sophos Antivirus
Norton AntiVirus
ClamAV
Immunet AntiVirus
Note
ClamAV is an open source antivirus engine sponsored and maintained by

Cisco and non-Cisco engineers. You can download ClamAV from
www.clamav.net. Immunet is a free community-based antivirus software
maintained by Cisco Sourcefire. You can download Immunet from
www.immunet.com.
There are numerous other antivirus software companies and products. The
following link provides a comprehensive list and comparison of the
different antivirus software available on the market:
http://en.wikipedia.org/wiki/Comparison_of_antivirus_software.
Personal firewalls and host intrusion prevention systems (HIPS) are

software applications that you can install on end-user machines or servers
to protect them from external security threats and intrusions. The term
personal firewall typically applies to basic software that can control Layer
3 and Layer 4 access to client machines. HIPS provides several features that
offer more robust security than a traditional personal firewall, such as host
intrusion prevention and protection against spyware, viruses, worms,
Trojans, and other types of malware.
Today, more sophisticated software makes basic personal firewalls and
45
HIPS obsolete. For example, Cisco Advanced Malware Protection (AMP)
for Endpoints provides granular visibility and control to stop advanced
threats missed by other security layers. Cisco AMP for Endpoints takes
advantage of telemetry from big data, continuous analysis, and advanced
analytics provided by Cisco threat intelligence to be able to detect, analyze,
and stop advanced malware across endpoints.
Cisco AMP for Endpoints provides advanced malware protection for many
operating systems, including Windows, Mac OS X, Android, and Linux.
Attacks are getting very sophisticated and can evade detection of traditional
systems and endpoint protection. Today, attackers have the resources,
knowledge, and persistence to beat point-in-time detection. Cisco AMP for
Endpoints provides mitigation capabilities that go beyond point-in-time
detection. It uses threat intelligence from Cisco to perform retrospective
analysis and protection. Cisco AMP for Endpoints also provides device and
file trajectory capabilities to allow a security administrator to analyze the
full spectrum of an attack. Device trajectory and file trajectory support the
following file types in Windows and Mac OS X operating systems:
MSEXE
PDF
MSCAB
MSOLE2
ZIP
ELF
MACHO
MACHO_UNIBIN
SWF
JAVA
Note
46
The Mac OS X connector does not support SWF files. The Windows
connector does not scan ELF, JAVA, MACHO, or MACHO_UNIBIN files at
the time of this writing. The Android AMP connector scans APK files.
AMP for Networks
Cisco AMP for Networks provides next-generation security services that go

beyond point-in-time detection. It provides continuous analysis and tracking
of files and also retrospective security alerts so that a security administrator
can take action during and after an attack. The file trajectory feature of
Cisco AMP for Networks tracks file transmissions across the network, and
the file capture feature enables a security administrator to store and retrieve
files for further analysis. Chapter 6, “Cisco AMP for Networks,” provides
Cisco AMP for Networks configuration and troubleshooting guidance, with
step-by-step examples.
AMP Threat Grid
Cisco acquired a security company called ThreatGRID that provides cloud-

based and on-premises malware analysis solutions. Cisco integrated Cisco
AMP and Threat Grid to provide a solution for advanced malware analysis
with deep threat analytics. The Cisco AMP Threat Grid integrated solution
analyzes millions of files and correlates them with hundreds of millions of
malware samples. This provides a look into attack campaigns and how
malware is distributed. This solution provides a security administrator with
detailed reports of indicators of compromise and threat scores that help
prioritize mitigations and recover from attacks.
Chapter 9, “AMP Threat Grid: Malware Analysis and Threat Intelligence,”

provides the technical details of the AMP Threat Grid solution.
Email Security Overview

Users are no longer accessing email only from the corporate network or
from a single device. Cisco provides cloud-based, hybrid, and on-premises
ESA-based solutions that can help protect any dynamic environment. This
section introduces these solutions and technologies and explains how users
can use threat intelligence to detect, analyze, and protect against both known
47
and emerging threats.
There are several types of email-based threats. The following are the most
common:
Spam: Unsolicited email messages that can be advertising a service or

(typically) a scam or a message with malicious intent. Email spam continues
to be a major threat because it can be used to spread malware.
Malware attachments: Email messages containing malicious software

(malware).
Phishing: An attacker’s attempt to fool a user that the email

communication comes from a legitimate entity or site, such as banks, social
media websites, online payment processors, or even corporate IT
communications. The goal of a phishing email is to steal a user’s sensitive
information, such as user credentials, bank account information, and so on.
Spear phishing: Phishing attempts that are more targeted. Spear phishing
emails are directed to specific individual or organizations. For instance, an
attacker may perform a passive reconnaissance on an individual or
organization by gathering information from social media sites (for example,
Twitter, LinkedIn, Facebook) and other online resources. Then the attacker
may tailor a more directed and relevant message to the victim to increase
the probability that the user will be fooled to follow a malicious link, click
an attachment containing malware, or simply reply to the email and provide
sensitive information. Another phishing-based attack, called whaling,
specifically targets executives and high-profile users.
Email Security Appliance
The following are the different Email Security Appliance (ESA) models:
Cisco X-Series ESA models:
Cisco X1070: A high-performance ESA model for service providers and

large enterprises
Cisco C-Series ESA models:
48
Cisco C680: A high-performance ESA model for service providers and
large enterprise
Cisco C670: An ESA model designed for medium-size enterprises
Cisco C380: An ESA model designed for medium-size enterprises
Cisco C370: An ESA model designed for small to medium-size

enterprises
Cisco C170: An ESA model designed for small businesses and branch
offices
The Cisco ESA runs the Cisco AsyncOS operating system. Cisco AsyncOS
supports numerous features that help mitigate email-based threats.
The following are examples of the features supported by the Cisco ESA:
Access control: Controlling access for inbound senders, according to a

sender’s IP address, IP address range, or domain name.
Anti-spam: Multilayer filters based on Cisco SenderBase reputation and

Cisco antispam integration. The antispam reputation and zero-day threat
intelligence are fueled by the Cisco security intelligence and research group
named Talos.
Network antivirus: Network antivirus capabilities at the gateway. Cisco

partnered with Sophos and McAfee, supporting their antivirus scanning
engines.
Advanced Malware Protection (AMP): Allows security administrators

to detect and block malware and perform continuous analysis and
retrospective alerting.
Data loss prevention (DLP): The ability to detect any sensitive emails
and documents leaving the corporation. The Cisco ESA integrates RSA
email DLP for outbound traffic.
Email encryption: The ability to encrypt outgoing mail to address

regulatory requirements. The administrator can configure an encryption
policy on the Cisco ESA and use a local key server or hosted key service to
49
encrypt the message.
Email authentication: A few email authentication mechanisms, including

Sender Policy Framework (SPF), Sender ID Framework (SIDF), and
DomainKeys Identified Mail (DKIM) verification of incoming mail, as well
as DomainKeys and DKIM signing of outgoing mail.
Outbreak filters: Preventive protection against new security outbreaks

and email-based scams using Cisco’s Security Intelligence Operations
(SIO) threat intelligence information.
Note
Cisco SenderBase (see www.senderbase.org) is the world’s largest email

and web traffic monitoring network. It provides real-time threat intelligence
powered by Cisco SIO.
The Cisco ESA acts as the email gateway for an organization, handling all
email connections, accepting messages, and relaying messages to the
appropriate systems. The Cisco ESA can service email connections from the
Internet to users inside a network and from systems inside the network to the
Internet. Email connections use Simple Mail Transfer Protocol (SMTP).
The ESA services all SMTP connections, by default acting as the SMTP
gateway.
Tip
Mail gateways are also known as a mail exchangers (MX).
The Cisco ESA uses listeners to handle incoming SMTP connection

requests. A listener defines an email processing service that is configured
on an interface in the Cisco ESA. Listeners apply to email entering the
appliance from either the Internet or internal systems.
The following listeners can be configured:
Public listeners for email coming in from the Internet
50
Private listeners for email coming from hosts in the corporate (inside)
network (These emails are typically from internal groupware, Exchange,
POP, or IMAP email servers.)
Cisco ESA listeners are often referred to as SMTP daemons, and they run
on specific Cisco ESA interfaces. When a listener is configured, the
following information must be provided:
Listener properties such as a specific interface in the Cisco ESA and the
TCP port that will be used. The listener properties must also indicate
whether it is a public or a private listener.
The hosts that are allowed to connect to the listener, using a combination
of access control rules. An administrator can specify which remote hosts
can connect to the listener.
The local domains for which public listeners accept messages.
Cisco Cloud Email Security provides a cloud-based solution that allows

companies to outsource the management of their email security management.
The service provides email security instances in multiple Cisco data centers
to enable high availability.
Cisco Hybrid Email Security
The Cisco Hybrid Email Security solution combines both cloud-based and
on-premises ESAs. This hybrid solution helps Cisco customers reduce their
onsite email security footprint and outsource a portion of their email
security to Cisco, while still allowing them to maintain control of
confidential information within their physical boundaries. Many
organizations must comply with regulations that require them to keep
sensitive data physically on their premises. The Cisco Hybrid Email
Security solution allows network security administrators to remain
compliant and to maintain advanced control with encryption, DLP, and
onsite identity-based integration.
Web Security Overview
51
For an organization to be able to protect its environment against web-based
security threats, security administrators need to deploy tools and mitigation
technologies that go far beyond traditional blocking of known bad websites.
Today, you can download malware through compromised legitimate
websites, including social media sites, advertisements in news and
corporate sites, and gaming sites. Cisco has developed several tools and
mechanisms to help customers combat these threats, including and Cisco
Web Security Appliance (WSA), Cisco Security Management Appliance
(SMA), and Cisco Cloud Web Security (CWS). These solutions enable
malware detection and blocking, continuous monitoring, and retrospective
alerting.
Web Security Appliance
A Cisco WSA uses cloud-based intelligence from Cisco to help protect an

organization before, during, and after an attack. This “lifecycle” is referred
to as the attack continuum. The cloud-based intelligence includes web
(URL) reputation and zero-day threat intelligence from the Talos Cisco
security intelligence and research group. This threat intelligence helps
security professionals stop threats before they enter the corporate network
and also enables file reputation and file sandboxing to identify threats
during an attack. Retrospective attack analysis allows security
administrators to investigate and provide protection after an attack, when
advanced malware might have evaded other layers of defense.
A Cisco WSA can be deployed in explicit proxy mode or as a transparent

proxy, using the Web Cache Communication Protocol (WCCP). WCCP was
originally developed by Cisco, but several other vendors have integrated
this protocol in their products to allow clustering and transparent proxy
deployments on networks using Cisco infrastructure devices (routers,
switches, firewalls, and so on).
Figure 1-3 illustrates a Cisco WSA deployed as an explicit proxy.
52
Figure 1-3 WSA Explicit Proxy Configuration
The following are the steps illustrated in Figure 1-3:
Step 1. An internal user makes an HTTP request to an external website. The

client browser is configured to send the request to the Cisco WSA.
Step 2. The Cisco WSA connects to the website on behalf of the internal
user.
Step 3. The firewall (Cisco ASA) is configured to only allow outbound

web traffic from the Cisco WSA, and it forwards the traffic to the web
server.
Figure 1-4 shows a Cisco WSA deployed as a transparent proxy.
Figure 1-4 Transparent Proxy Configuration
The following are the steps illustrated in Figure 1-4:
Step 1. An internal user makes an HTTP request to an external website.
53
Step 2. The internal router (R1) redirects the web request to the Cisco
WSA, using WCCP.
Step 3. The Cisco WSA connects to the website on behalf of the internal
user.
Step 4. The firewall (Cisco ASA) is configured to only allow outbound

web traffic from the WSA. The web traffic is sent to the Internet web server.
Figure 1-5 demonstrates how the WCCP registration works. The Cisco
WSA is the WCCP client, and the Cisco router is the WCCP server.
Figure 1-5 WCCP Registration
During the WCCP registration process, the WCCP client sends a registration
announcement (“Here I am”) every 10 seconds. The WCCP server (the
Cisco router, in this example) accepts the registration request and
acknowledges it with an “I see you” WCCP message. The WCCP server
waits 30 seconds before it declares the client as “inactive” (engine failed).
WCCP can be used in large-scale environments. Figure 1-6 shows a cluster
of Cisco WSAs, where internal Layer 3 switches redirect web traffic to the
cluster.
54
Figure 1-6 Cisco WSA Cluster Example
The following are the different Cisco WSA models:
Cisco WSA S680: A high-performance WSA designed for large

organizations with 6000 to 12,000 users. A two rack-unit (2 RU) appliance
with 16 (2 octa core) CPUs, 32 GB of memory, and 4.8 TB of disk space.
Cisco WSA S670: A high-performance WSA designed for large

organizations with 6000 to 12,000 users. A 2 RU appliance with 8 (2 octa
core) CPUs, 8 GB of memory, and 2.7 TB of disk space.
Cisco WSA S380: A WSA designed for medium-size organizations with

1500 to 6000 users. A 2 RU appliance with 6 (1 hexa core) CPUs, 16 GB of
memory, and 2.4 TB of disk space.
55
Cisco WSA S370: A WSA designed for medium-size organizations with
1500 to 6000 users. A 2 RU appliance with 4 (1 quad core) CPUs, 4 GB or
memory, and 1.8 TB of disk space.
Cisco WSA S170: A WSA designed for small to medium-size

organizations with up to 1500 users. A 1 RU appliance with 2 (1 dual core)
CPUs, 4 GB of memory, and 500 GB of disk space.
The Cisco WSA runs the Cisco AsyncOS operating system. Cisco AsyncOS
supports numerous features that help mitigate web-based threats. The
following are examples of these features:
Real-time antimalware adaptive scanning: The Cisco WSA can be

configured to dynamically select an antimalware scanning engine based on
URL reputation, content type, and scanner effectiveness. Adaptive scanning
is a feature designed to increase the “catch rate” of malware that is
embedded in images, JavaScript, text, and Adobe Flash files. Adaptive
scanning is an additional layer of security on top of Cisco WSA web
reputation filters that include support for Sophos, Webroot, and McAfee.
Layer 4 traffic monitor: The Cisco WSA is used to detect and block
spyware. It dynamically adds IP addresses of known malware domains to
databases of sites to block.
Third-party DLP integration: The Cisco WSA redirects all outbound

traffic to a third-party DLP appliance, allowing deep content inspection for
regulatory compliance and data exfiltration protection. It enables an
administrator to inspect web content by title, metadata, and size and to even
prevent users from storing files to cloud services, such as Dropbox and
Google Drive.
File reputation: Using threat information from Cisco Talos, this file
reputation threat intelligence is updated every 3 to 5 minutes.
File sandboxing: If malware is detected, the Cisco AMP capabilities can

put files in a sandbox to inspect the malware’s behavior and combine the
inspection with machine-learning analysis to determine the threat level.
Cisco Cognitive Threat Analytics (CTA) uses machine-learning algorithms
to adapt over time.
56
File retrospection: After a malicious attempt or malware is detected, the
Cisco WSA continues to cross-examine files over an extended period of
time.
Application visibility and control: The Cisco ASA can inspect and even
block applications that are not allowed by the corporate security polity. For
example, an administrator can allow users to use social media sites like
Facebook but block micro-applications such as Facebook games.
Cisco Security Management Appliance
Cisco Security Management Appliance (SMA) is a Cisco product that

centralizes the management and reporting for one or more Cisco ESAs and
Cisco WSAs. Cisco SMA enables you to consistently enforce policy and
enhances threat protection. Figure 1-7 shows a Cisco SMA that is
controlling Cisco ESA and Cisco WSAs in different geographic locations
(New York, Raleigh, Paris, and London).
Figure 1-7 Cisco SMA Centralized Deployment
The Cisco SMA comes in different models, including physical appliances

and the Cisco Content Security Management Virtual Appliance (SMAV):
Cisco SMA M680: Designed for large organizations with more than
57
10,000 users
Cisco SMAV M600v: Designed for organizations with more than 5000
users
Cisco SMA M380: Designed for organizations with 1000 to 10,000 users
Cisco SMAV M300v: Designed for organizations with 1000 to 5000 users
Cisco SMA M170: Designed for small business or branch offices with up
to 1000 users
Cisco SMAV M100v: Designed for small business or branch offices with
up to 1000 users
Note
Cisco also has a Cisco SMAV M000v that is used for evaluations only.
Cisco CWS is a cloud-based security service that provides worldwide

threat intelligence, advanced threat defense capabilities, and roaming user
protection. The Cisco CWS service uses web proxies in the Cisco cloud
environment that scan traffic for malware and policy enforcement. Cisco
customers can connect to the Cisco CWS service directly by using a proxy
auto-configuration (PAC) file in the user endpoint or through connectors
integrated into the following Cisco products:
Cisco ISR G2 routers
Cisco ASA
Cisco WSA
Cisco AnyConnect Secure Mobility Client
Organizations using the transparent proxy functionality through a connector

can get the most out of their existing infrastructure. In addition, the scanning
58
is offloaded from the hardware appliances to the cloud, reducing the impact
to hardware utilization and reducing network latency. Figure 1-8 illustrates
how the transparent proxy functionality through a connector works.
Figure 1-8 Cisco ASA with Cisco CWS Connector Example
In Figure 1-8, the Cisco ASA is enabled with the Cisco CWS connector at a
branch office and protects the corporate users at the branch office with these
steps:
Step 1. An internal user makes an HTTP request to an external website

(example.org).
Step 2. The Cisco ASA forwards the request to the Cisco CWS global
cloud infrastructure.
Step 3. Cisco CWS notices that example.org has some web content (ads)
that is redirecting the user to a known malicious site.
59
Step 4. Cisco CWS blocks the request to the malicious site.
The Cisco ISE is a comprehensive security identity management solution

designed to function as a policy decision point for network access. It allows
security administrators to collect real-time contextual information from a
network, its users, and devices. Cisco ISE is the central policy management
platform in the Cisco TrustSec solution. It supports a comprehensive set of
authentication, authorization, and accounting (AAA); posture; and network
profiler features in a single device.
Cisco ISE allows security administrators to provide network guest access

management and wide-ranging client provisioning policies, including
802.1X environments. The support of TrustSec features such as security
group tags (SGTs) and security group access control lists (SGACLs) make
the Cisco ISE a complete identity services solution. Cisco ISE supports
policy sets, which let a security administrator group sets of authentication
and authorization policies.
Cisco ISE provides Network Admission Control (NAC) features, including

posture policies, to enforce configuration of end-user devices with the most
up-to-date security settings or applications before they enter the network.
The Cisco ISE supports the following agent types for posture assessment
and compliance:
Cisco NAC Web Agent: A temporary agent that is installed in end-user

machines at the time of login. The Cisco NAC Web Agent is not visible on
the end-user machine after the user terminates the session.
Cisco NAC Agent: An agent that is installed permanently on a Windows

or Mac OS X client system.
AnyConnect ISE Agent: An agent that is installed permanently on a

Windows or Mac OS X client system.
Cisco ISE provides a comprehensive set of features to allow corporate

users to connect their personal devices—such as mobile phones, tablets,
laptops, and other network devices—to the network. Such a bring-your-own
device (BYOD) system introduces many challenges in terms of protecting
60
network services and enterprise data. Cisco ISE provides support for
multiple mobile device management (MDM) solutions to enforce policy on
endpoints. ISE can be configured to redirect users to MDM onboarding
portals and prompt them to update their devices before they can access the
network. Cisco ISE can also be configured to provide Internet-only access
to users who are not compliant with MDM policies.
Cisco ISE supports the Cisco Platform Exchange Grid (pxGrid), a

multivendor, cross-platform network system that combines different parts of
an IT infrastructure, such as the following:
Security monitoring
Detection systems
Network policy platforms
Asset and configuration management
Identity and access management platforms
Cisco pxGrid has a unified framework with an open application

programming interface (API) designed in a hub-and-spoke architecture.
pxGrid is used to enable the sharing of contextual-based information from a
Cisco ISE session directory to other policy network systems, such as Cisco
IOS devices and the Cisco ASA.
The Cisco ISE can be configured as a certificate authority (CA) to generate

and manage digital certificates for endpoints. Cisco ISE CA supports
standalone and subordinate deployments.
Cisco ISE software can be installed on a range of physical appliances or on

a VMware server (Cisco ISE VM). The Cisco ISE software image does not
support the installation of any other packages or applications on this
dedicated platform.
Cisco Meraki Cloud-Managed MDM
Cisco acquired a company called Meraki that provides cloud-managed

MDM, cloud-managed wireless devices, and security appliances. Cisco
Meraki cloud-based enterprise mobility management allows network
61
administrators to pre-enroll devices or dynamically add users as they try to
connect to the corporate network. An administrator can push apps and
content or restrict network access based on user groups.
The Cisco Meraki web-based (cloud) dashboard allows administrators to

locate, track, monitor, and manage all end-user systems and mobile devices
from anywhere in the world.
Note
For more information about Cisco Meraki MDM solutions, visit

https://meraki.cisco.com/products/systems-manager.
Cisco Meraki Cloud-Managed Security Appliances
Cisco Meraki also has a series of cloud-managed security appliances that

provide the following features:
Identity-based firewall features that enforce network policy and traffic-

shaping rules, VLAN tags, and bandwidth limits for different types of users
Intrusion prevention to detect and protect network resources
VPN features to securely connect remote locations using mesh or hub-and-

spoke topologies
Content filtering, anti-malware, and anti-phishing capabilities
High availability and failover
Note
For more information about Cisco Meraki MDM solutions, go to

https://meraki.cisco.com/products.
Cisco VPN Solutions
62
Numerous enterprises, service providers, and other institutions deploy
virtual private networks (VPNs) to provide data integrity, authentication,
and data encryption to ensure confidentiality of the packets sent over the
Internet or another unprotected network. VPNs are designed to avoid the
cost of unnecessary leased lines. Many different protocols are used for VPN
implementations, including the following:
Point-to-Point Tunneling Protocol (PPTP)
Layer 2 Forwarding (L2F) protocol
Layer 2 Tunneling Protocol (L2TP)
Generic routing encapsulation (GRE)
Multiprotocol Label Switching (MPLS) VPN
Internet Protocol Security (IPsec)
Secure Sockets Layer (SSL)
VPN implementations can be categorized into two distinct groups:
Site-to-site VPNs: Enable organizations to establish VPN tunnels

between two or more network infrastructure devices in different sites so that
they can communicate over a shared medium such as the Internet. Many
organizations use IPsec, GRE, or MPLS VPN as site-to-site VPN protocols.
Remote-access VPNs: Enable users to work from remote locations, such

as their homes, hotels, and other premises as if they were directly connected
to their corporate network. Many organizations use IPsec and SSL VPN for
remote-access VPNs.
Cisco provides a comprehensive VPN portfolio, including support for site-

to-site VPNs in Cisco IOS devices and the Cisco ASA. Remote-access VPN
support includes clientless SSL VPN and full client connections with the
Cisco AnyConnect Secure Mobility Client. This book does not cover any
VPN topics in detail. Cisco ASA: All-in-One Next-Generation Firewall,
IPS, and VPN Services, third edition, covers the configuration and
troubleshooting of site-to-site IPsec VPNs and all forms of remote-access
VPNs (IPsec, clientless SSL, and client-based SSL).
63
Summary
Cisco makes some of the most complete and advanced security products in
the industry. These products and solutions provide visibility, policy
enforcement, and advanced threat protection across the network and the
entire attack continuum. This chapter introduces the new threat landscape
and the attack continuum. It also provides details about the Cisco ASA
5500-X Series next-generation firewalls and the Cisco ASA with
FirePOWER Services, Cisco FTD, the Firepower 4100 and 9300
appliances, Cisco’s NGIPS, Firepower Management Center, Cisco AMP for
Endpoints, Cisco AMP for Networks, and Cisco AMP Threat Grid. It also
provides an introduction to email and web security, describing the Cisco
ESA, Cloud Email Security, Cisco WSA, and Cisco CWS. This chapter also
introduces other Cisco core security products, such as Cisco ISE, Cisco
Meraki cloud-managed MDM, and Cisco Meraki cloud-managed security
appliances and briefly explains the available Cisco VPN solutions. The
chapters that follow focus on the latest next-generation platforms.
64
Chapter 2. Introduction to and Design of Cisco
ASA with FirePOWER Services
This chapter provides an introduction to the Cisco ASA with FirePOWER
Services solution. It also provides design guidance and best practices for
deploying Cisco ASA with FirePOWER Services. This chapter covers the
following topics:
Inline versus promiscuous mode
Cisco ASA FirePOWER management options
Cisco ASA FirePOWER Services sizing
Cisco ASA FirePOWER Services licensing
Compatibility with other Cisco ASA features
Cisco ASA FirePOWER packet processing order of operations
Cisco ASA FirePOWER Services and failover
Cisco ASA FirePOWER Services and clustering
Deployment of the Cisco ASA FirePOWER Services in the Internet edge
Deployment of the Cisco ASA FirePOWER Services in VPN scenarios
Deployment of the Cisco ASA FirePOWER Services in the data center
In Chapter 1, “Fundamentals of Cisco Next-Generation Security,” you

learned about the different Cisco next-generation security products and
technologies. You also learned that those security technologies and
processes should not focus solely on detection but should also provide the
ability to mitigate the impact of an attack. Organizations must maintain
65
visibility and control across the extended network during the full attack
continuum:
The Cisco ASA with FirePOWER Services and Cisco’s Advanced

Malware Protection (AMP) provide a security solution that helps you
discover threats and enforce and harden policies before an attack takes
place. These technologies and solutions can help you detect, block, and
defend against attacks that have already taken place. In Chapter 1 you also
learned that the Cisco ASA family has members in many shapes and sizes,
and you learned about their uses in small, medium, and large organizations.
Cisco introduced the Cisco ASA FirePOWER Services as part of the

integration of the SourceFire technology. Cisco ASA FirePOWER Services
provides the following key capabilities:
Access control: This policy-based capability allows a network security

administrator to define, inspect, and log the traffic that traverses a firewall.
Access control policies determine how traffic is permitted or denied in a
network. For instance, you can configure a default action to inspect all
traffic or to block or trust all traffic without further inspection. You can also
achieve a more complete access control policy with enrichment data based
on security threat intelligence. Whether you configure simple or complex
rules, you can control traffic based on security zones, network or
geographical locations, ports, applications, requested URLs, and per user.
Intrusion detection and prevention: Intrusion detection and prevention

help you detect attempts from an attacker to gain unauthorized access to a
network or a host, create performance degradation, or steal information.
You define intrusion detection and prevention policies based on your access
control policies. You can create and tune custom policies at a very granular
level to specify how traffic is inspected in a network.
AMP and file control: You can detect, track, capture, analyze, and
optionally block the transmission of files, including malware files and
nested files inside archive files in network traffic. File control also enables
66
you to detect and block users from sending or receiving files of different
specified types over a multitude of application protocols. You can configure
file control as part of the overall access control policies and application
inspection.
Application programming interfaces (APIs): Cisco ASA FirePOWER

Services supports several ways to interact with the system using APIs.
The Cisco ASA FirePOWER module can be a hardware module on the ASA
5585-X only or a software module that runs in a solid state drive (SSD) in
all other Cisco ASA 5500-X models.
Note
The Cisco ASA FirePOWER Services module is not supported in the 5505.
For the 5512-X through ASA 5555-X, you must install an SSD. The SSD is
standard on the 5506-X, 5508-X, and 5516-X.
Inline versus Promiscuous Mode
The Cisco ASA FirePOWER module can be configured in either of the

following modes:
Inline mode
Promiscuous monitor-only (passive) mode
Inline Mode
When the Cisco ASA FirePOWER module is configured in inline mode, the
traffic passes through the firewall policies before it is sent to the Cisco
ASA FirePOWER module.
Figure 2-1 illustrates the order of operations when the Cisco ASA
FirePOWER module is configured in inline mode.
67
Figure 2-1 Inline Mode
1. Network traffic is received on a given interface of the Cisco ASA. In this

example, the traffic is received in the outside interface.
2. If IPsec or SSL VPN is configured, the incoming encrypted traffic is

decrypted.
3. Firewall policies are applied to the traffic.
4. If the traffic is compliant and allowed by the firewall policies, it is sent

to the Cisco ASA FirePOWER module.
5. The Cisco ASA FirePOWER module inspects the traffic and applies its
security policies and takes appropriate actions. If traffic is not compliant
with security policies or is determined to be malicious, the Cisco ASA
FirePOWER module sends back a verdict to the ASA, and the ASA blocks
the traffic and alerts the network security administrator. All valid traffic is
allowed by the Cisco ASA.
6. If IPsec or SSL VPN is configured, the outgoing traffic is encrypted.
7. The network traffic is sent to the network.
Promiscuous Monitor-Only Mode
When the Cisco ASA FirePOWER module is configured in promiscuous

monitor-only mode, a copy of each packet of the traffic that is defined in the
68
service policy is sent to the Cisco ASA FirePOWER module.
Figure 2-2 illustrates the order of operations when the Cisco ASA
FirePOWER module is configured in promiscuous monitor-only mode:
1. Network traffic is received on a given interface of the Cisco ASA. In this

example, the traffic is received in the outside interface.
Figure 2-2 Promiscuous Monitor-Only Mode
2. If IPsec or SSL VPN is configured, the incoming encrypted traffic is

decrypted.
3. Firewall policies are applied to the traffic.
4. If the traffic is compliant and allowed by the firewall policies, a copy of

each packet is sent to the Cisco ASA FirePOWER module. If traffic is not
compliant with security policies or is determined to be malicious, the Cisco
ASA FirePOWER module can be configured to alert the administrator, but it
does not block the traffic.
5. If IPsec or SSL VPN is configured, the outgoing traffic is encrypted.
6. The network traffic is sent to the network.
As you can see, the most secure and effective way to configure the Cisco
ASA FirePOWER module is in inline mode. You can configure the Cisco
ASA FirePOWER module in promiscuous monitor-only mode when you are
69
evaluating and performing capacity planning for a new deployment.
The Cisco ASA FirePOWER module modes are a bit different than those of
the Cisco FirePOWER Series of appliances, which support the following
deployment modes/options:
Standalone IPS (active/standby)
Clustering
SourceFire Redundancy Protocol (SFRP)
Bypass and non-bypass modules
Cisco FirePOWER Series next-generation intrusion prevention systems

(NGIPS) appliances can be deployed in multiple modes at once:
Passive
Inline
Routed
Switched
Note
Chapter 10, “Introduction to and Deployment of Cisco Next-Generation

IPS,” covers the different modes of operations of the Cisco FirePOWER
Series NGIPS appliances.
Cisco ASA FirePOWER Management Options
There are several options available for network security administrators to

manage the Cisco ASA FirePOWER module. The Cisco ASA FirePOWER
module provides a basic command-line interface (CLI) for initial
configuration and troubleshooting only. Network security administrators can
configure security policies on the Cisco ASA FirePOWER module using
either of these methods:
70
Administrators can configure the Cisco Firepower Management Center
hosted on a separate appliance or deployed as a virtual machine (VM).
Administrators can configure the Cisco ASA FirePOWER module

deployed on Cisco ASA 5506-X, 5508-X, and 5516-X using Cisco’s
Adaptive Security Device Manager (ASDM).
Figure 2-3 shows a Cisco ASA with FirePOWER Services being managed
by a Cisco Firepower Management Center (FMC) in a VM.
Figure 2-3 Cisco ASA with FirePOWER Services Managed by a Cisco

In Figure 2-3 the Cisco Firepower Management Center manages the Cisco
ASA FirePOWER module via its management interface. The following
section provides important information about configuring and accessing the
Cisco ASA FirePOWER module management interface.
Accessing the Cisco ASA FirePOWER Module Management Interface

in Cisco ASA 5585-X Appliances
In the Cisco ASA 5585-X, the Cisco ASA FirePOWER module includes a
separate management interface. All management traffic to and from the
Cisco ASA FirePOWER module must enter and exit this management
interface, and the management interface cannot be used as a data interface.
The Cisco ASA FirePOWER module needs Internet access to perform
71
several operations, such as automated system software updates and threat
intelligence updates. If the module is managed by the Firepower
Management Center, the FMC is the one that needs to have Internet access to
perform those tasks.
Figure 2-4 shows an example of how you can physically connect the Cisco
ASA FirePOWER module management interface to be able to reach the
Internet via the Cisco ASA interface.
Figure 2-4 Cisco ASA 5585-X FirePOWER Module Management Interface
In Figure 2-4, the Cisco ASA 5585-X has two modules:
A module running Cisco ASA software
A module running FirePOWER Services
The Cisco ASA is managed via the interface named management 0/0 in this
example. This interface is configured with the IP address 192.168.1.1. The
Cisco ASA FirePOWER module is managed via the interface named
management 1/0, configured with the IP address 192.168.1.2. The Cisco
ASA FirePOWER module is being managed by a virtual Cisco Firepower
72
Management Center. Both interfaces are connected to a Layer 2 switch in
this example.
Note
You can use other cabling options with the Cisco ASA FirePOWER module
management interface to be able to reach the Internet, depending on how you
want to connect your network. However, the example illustrated in Figure 2-
4 is one of the most common scenarios.
In order for the Cisco ASA FirePOWER module management interface to

have an Internet connection, the default gateway of the Cisco ASA
FirePOWER module is set to the Cisco ASA management interface IP
address (192.168.1.1 in this example). Figure 2-5 illustrates the logical
connection between the Cisco ASA FirePOWER module management
interface and the Cisco ASA management interface.
Figure 2-5 Cisco ASA FirePOWER Module Management Interface
Accessing the Cisco ASA FirePOWER Module Management Interface

in Cisco ASA 5500-X Appliances
In the rest of the Cisco 5500-X appliances, the management interface is

shared by the Cisco ASA FirePOWER module and the classic Cisco ASA
software. These appliances include the Cisco ASA 5506-X, 5506W-X,
5506H-X, 5508-X, 5512-X, 5515-X, 5516-X, 5525-X, 5545-X, and 5555-
X appliances.
Figure 2-6 shows a Cisco ASA 5516-X running Cisco ASA FirePOWER
Services.
73
In Figure 2-6, the management interface is used by the Cisco ASA

FirePOWER module. The management interface is configured with the IP
address 10.1.2.2. You cannot configure an IP address for this interface in the
Cisco ASA configuration. For the ASA 5506-X, 5508-X, and 5516-X, the
default configuration enables the preceding network deployment; the only
change you need to make is to set the module IP address to be on the same
network as the ASA inside interface and to configure the module gateway IP
address. For other models, you must remove the ASA-configured name and
IP address for management 0/0 or 1/1 and then configure the other interfaces
as shown in Figure 2-6.
Note
The management interface is considered completely separate from the Cisco

ASA, and routing must be configured accordingly.
The Cisco ASA FirePOWER module default gateway is configured to be the

inside interface of the Cisco ASA (10.1.2.1), as illustrated in Figure 2-7.
74
Figure 2-7 Cisco ASA 5500-X FirePOWER Module Default Gateway
If you must configure the management interface separately from the inside
interface, you can deploy a router or a Layer 3 switch between both
interfaces, as shown in Figure 2-8. This option is less common, as you still
need to manage the ASA via the inside interface.

Connected to a Router
In Figure 2-8, the Cisco ASA FirePOWER module default gateway is the
router labeled R1, with the IP address 10.1.2.1. The Cisco ASA’s inside
75
interface is configured with the IP address 10.1.1.1. The Cisco ASA
FirePOWER module must have a way to reach the inside interface of the
ASA to allow for on-box ASDM management. On the other hand, if you are
using FMC, the Cisco ASA FirePOWER module needs to have a way to
reach the FMC.
Cisco ASA FirePOWER Services Sizing
It is really important that you understand the capabilities of each Cisco ASA
model before you select the one that is appropriate for your specific
deployment. Table 2-1 lists the maximum application visibility and control
(AVC) and NGIPS throughput on each Cisco ASA–supported model.
For a complete and up-to-date Cisco ASA model comparison, visit Cisco’s
ASA website, at cisco.com/go/asa.
Table 2-1 The Maximum Concurrent Connections and AVC/NGIPS
76
Throughput
Cisco ASA FirePOWER Services Licensing
You have already learned that the Cisco ASA FirePOWER module can be
managed by the Firepower Management Center or ASDM, in the case of the
Cisco ASA 5506-X and 5508-X. The Firepower Management Center and
the Cisco ASA FirePOWER module require different licenses. These
licenses are installed in the Cisco FirePOWER module and the Cisco
Firepower Management Center. There are no additional licenses required in
the Cisco ASA.
The following are the different types of Cisco ASA FirePOWER Services
licenses:
Protection
Control
Malware
URL Filtering
Table 2-2 provides a high-level overview of each license.
Table 2-2 The Different Types of Cisco ASA FirePOWER Services

Licenses
The Protection License
The Protection license enables a network security administrator to perform
77
intrusion detection and prevention, file control, and security intelligence
filtering. The intrusion detection and prevention capabilities are used to
analyze network traffic for intrusions and exploits, to alert the network
security administrator and optionally block offending packets. File control
allows network security administrators to detect and (optionally) block
users from sending or receiving files of specific types over specific
application protocols.
Note
The Malware license also allows you to inspect and block a set of file
types, based on malware intelligence and dispositions. The Malware
license is covered later in this chapter.
Security intelligence filtering allows network security administrators to

blacklist different hosts/IP addresses before the traffic is analyzed by access
control rules. Cisco provides dynamic feeds, allowing a network security
administrator to immediately blacklist connections based on the Cisco threat
intelligence capabilities, fueled by Cisco’s research organization, Talos.
You can also configure this to be monitor only.
Tip
You can configure access control policies without a license; however, if you
do this, you will not be able to apply the policy until the Protection license
is added to the Cisco ASA FirePOWER module. If the Protection license is
for some reason deleted, the Cisco ASA FirePOWER module ceases to
detect intrusions and file events, and it is not able to reach the Internet for
either Cisco-provided or third-party security intelligence information.
A Protection license is required with all the other licenses (Control,

Malware, and URL Filtering licenses). If the Protection license is disabled
or deleted, this has a direct effect on any other licenses installed.
The Control License
78
The Control license allows a network security administrator to implement
user and application control. The administrator does this by adding user and
application settings to access control rules. As with the Protection license,
you can add user and application conditions to access control rules without
a Control license. You cannot apply the policy until the Control license is
installed and enabled in the Cisco ASA FirePOWER module, however.
The URL Filtering License
The URL Filtering license allows a network security administrator to

implement access control rules that determine what traffic can pass through
the firewall, based on URLs requested by monitored hosts. The Cisco ASA
FirePOWER module obtains information about those URLs from the Cisco
cloud, as illustrated in Figure 2-9.
Figure 2-9 URL Filtering Information Obtained from Cisco’s Cloud
You can configure individual URLs or groups of URLs to be allowed or

blocked by the Cisco ASA FirePOWER module without a URL Filtering
license; however, you cannot use URL category and reputation data to filter
network traffic without a URL Filtering license. The example in Figure 2-9
applies to Cisco ASA FirePOWER modules managed by ASDM. If the
Cisco ASA FirePOWER module is managed by the FMC, the URL
categorization and reputation information is received from Cisco by the
FMC and then sent to the managed devices (that is, Cisco ASA FirePOWER
modules, NGIPS, FTD, etc.).
79
Note
The URL Filtering license is a subscription-based license.
The Malware License
The Malware license enables Advanced Malware Protection (AMP) in the

Cisco ASA FirePOWER module. With AMP you can detect and block
malware potentially being transmitted over the network.
Malware detection is configured as part of a file policy, which you then

associate with one or more access control rules.
Note
Step-by-step examples of how to configure the Cisco ASA FirePOWER

module are provided in Chapter 3, “Configuring Cisco ASA with
FirePOWER Services.”
Viewing the Installed Cisco ASA FirePOWER Module Licenses
You can view the installed licenses in the Cisco ASA FirePOWER module
by navigating to System > Licenses in the Cisco Firepower Management
Center. The Licenses page lists all the licenses in the devices managed by
the Cisco Firepower Management Center, as shown in Figure 2-10.
80
Figure 2-10 Cisco Firepower Management Center Licenses Page
In Figure 2-10, a Cisco ASA 5515-X is being managed by the Cisco

Firepower Management Center. The Protection, Control, Malware, and URL
Filtering licenses are enabled.
Another way to view the installed licenses in the Cisco ASA FirePOWER
module is by navigating to Devices > Device Management in the Cisco
Firepower Management Center. Then click the device for which you want to
see the details, as shown in Figure 2-11.
81
Figure 2-11 Cisco Firepower Management Center Device Management
Adding a License to the Cisco ASA FirePOWER Module
This section covers how to add a license to the Cisco ASA FirePOWER
module after you receive the activation key provided by Cisco when you
purchase the license. The following are the steps to add a license:
Step 1. Navigate to System > Licenses in the Cisco Firepower

Management Center, as shown in Figure 2-12.
82
Figure 2-12 Adding a New License in the FMC
Step 2. Click Add New License on the Licenses page.
Step 3. Copy and paste the license into the License field and click Submit
License. If you do not have the license, follow the instructions onscreen to
obtain your license.
If you are configuring the Cisco ASA FirePOWER module using ASDM,
you can manage and install FirePOWER licenses by navigating to
Configuration > ASA FirePOWER Configuration > Licenses, as shown
in Figure 2-13.
83
Figure 2-13 Adding a New License in ASDM
Cisco ASA FirePOWER Compatibility with Other Cisco ASA

Features
The Cisco ASA FirePOWER module provides advanced HTTP inspection

and other advanced application inspection features. To take advantage of
these features, you do not configure traditional HTTP inspection in the
Cisco ASA.
In addition, the Mobile User Security (MUS) feature is not compatible with
the Cisco ASA FirePOWER module. You must disable MUS if it is enabled
in the Cisco ASA.
All other Cisco ASA application inspections are compatible with the Cisco
ASA FirePOWER module.
Cisco ASA FirePOWER Packet Processing Order of
84
Operations
When the Cisco ASA FirePOWER module is deployed, the Cisco ASA
processes all ingress packets against access control lists (ACLs),
connection tables, Network Address Translation (NAT), and application
inspections before traffic is forwarded to the FirePOWER Services module.
In order for the Cisco ASA to redirect packets to the Cisco ASA
FirePOWER module, you need to configure redirection policies using the
Cisco ASA Modular Policy Framework (MPF), as illustrated in Figure 2-
14.
Figure 2-14 Cisco ASA MPF, Redirecting Traffic to the Cisco ASA
FirePOWER Module
Note
Chapter 3 covers how to configure the Cisco ASA MPF to redirect traffic to
the Cisco ASA FirePOWER module.
85
Figure 2-15 shows the Cisco ASA packet processing order of operations.
Figure 2-15 The Cisco ASA Packet Processing Order of Operations
The following steps are illustrated in Figure 2-15:
Step 1. A packet is received on a given interface of the Cisco ASA. If a

VPN is configured, the packet is decrypted at this point. If ACL bypass is
configured for VPN traffic, the Cisco ASA proceeds to step 5.
Step 2. The Cisco ASA checks to see if there is an existing connection for
the source and destination hosts for that specific traffic. If there is an
existing connection, the Cisco ASA bypasses the ACL checks and performs
application inspection checks and proceeds to step 5.
Step 3. If there is no existing connection for that traffic, the Cisco ASA
performs the NAT checks (or untranslate process).
Step 4. The Cisco ASA allows or denies traffic based on the rules in the
configured ACLs.
Step 5. If traffic is allowed, the Cisco ASA performs application

inspection.
Step 6. The Cisco ASA forwards the packet to the Cisco ASA FirePOWER
module. If promiscuous monitor-only mode is configured, only a copy of the
packet is sent to the Cisco ASA FirePOWER module. If the Cisco ASA
FirePOWER module is configured in inline mode, the packet is inspected
and dropped if it does not conform to security policies. If the packet is
compliant with security policies and Cisco ASA FirePOWER module
protection capabilities, it is sent back to the ASA for processing.
86
Step 7. The Cisco ASA determines the egress interface based on NAT or
Layer 3 routing.
Step 8. Layer 3 routing is performed.
Step 9. Layer 2 address lookup occurs.
Step 10. The packet is sent to the network.
Figure 2-16 shows the packet flow in the Cisco ASA 5585-X.
Figure 2-16 The Packet Flow in the Cisco ASA 5585-X
In Cisco ASA 5585-X appliances, the SSP running Cisco ASA software
processes all ingress and egress packets. No packets are directly processed
by the Cisco ASA FirePOWER module (SSP) except for the Cisco ASA
FirePOWER module management port.
Cisco ASA FirePOWER Services and Failover
The Cisco ASA supports high availability using failover and clustering.
This section covers the deployment of the Cisco ASA FirePOWER module
in failover scenarios. Clustering is covered later in this chapter.
The Cisco ASA supports two types of failover:
Active/standby
Active/active
87
In active/standby failover, one unit in a failover pair is always active, and
the other one is in standby. Figure 2-17 illustrates active/standby failover.
Figure 2-17 Active/Standby Failover
The standby device drops all transit traffic that it may receive and accepts
only management connections. For a switchover to occur automatically, the
active unit must become less operationally healthy than the standby. The
failover event moves all transit traffic to the peer device, even if the actual
impact on the previously active unit is localized. When running in multiple-
context mode, all contexts switch over at the same time. Active/standby
failover is the only option when running in single-context mode.
What are these so-called security contexts? Security contexts enable a

physical Cisco ASA to be partitioned into multiple standalone firewalls.
Each context acts and behaves as an independent entity, with its own
configuration, interfaces, security policies, routing table, and administrators.
The following are some examples of scenarios in which security contexts
are useful in network deployments:
88
You act as a service provider and want to provide firewall services to
customers; however, you do not want to purchase additional physical
firewalls for each client.
You manage an educational institution and want to segregate student

networks from faculty networks for improved security while using one
physical security appliance.
You administer a large enterprise with different departmental groups, and

each department wants to implement its own security policies.
You have overlapping networks in your organization and want to provide

firewall services to all those networks without changing the addressing
scheme.
You currently manage many physical firewalls, and you want to integrate
security policies from all firewalls into one physical firewall.
You manage a data center environment and want to provide end-to-end

virtualization to reduce operational costs and increase efficiency.
The responsibilities of the active unit include the following items:
Accept configuration commands from the user and replicate them to the
standby peer. All management and monitoring of a failover pair should
happen on the active unit because configuration replication is not a two-way
process. Making any changes on the standby ASA causes configuration
inconsistency that may prevent subsequent command synchronization and
create issues after a switchover event. If you inadvertently made a change
on the standby device, exit the configuration mode and issue the write
standby command on the active unit to restore the proper state. This
command completely overwrites the existing running configuration of the
standby unit with the running configuration of the active ASA.
Process all transit traffic, apply configured security policies, build and
tear down connections, and synchronize the connection information to the
standby unit, if configured for stateful failover.
Send NetFlow Secure Event Logging (NSEL) and syslog messages to the
configured event collectors. When necessary, you may configure the standby
unit to transmit syslog messages with the logging standby command. Keep
89
in mind that this command doubles the connection-related syslog traffic from
the failover pair.
Build and maintain dynamic routing adjacencies. The standby unit never
participates in dynamic routing.
By default, failover operates in a stateless manner. In this configuration, the

active unit only synchronizes its configuration to the standby device. All the
stateful flow information remains local to the active ASA, so all
connections must reestablish upon a failover event. While this configuration
preserves ASA processing resources, most high-availability configurations
require stateful failover. To pass state information to the standby ASA, you
must configure a stateful failover link.
Stateful failover is not available on the Cisco ASA 5505 platform. When
stateful replication is enabled, an active ASA synchronizes the following
additional information to the standby peer:
Stateful table for TCP and UDP connections. To preserve processing

resources, ASA does not synchronize certain short-lived connections by
default. For example, HTTP connections over TCP port 80 remain stateless
unless you configure the failover replication http command. Similarly,
ICMP connections synchronize only in active/active failover with
asymmetric routing (ASR) groups configured. Note that enabling stateful
replication for all connections may cause up to a 30 percent reduction in the
maximum connection setup rate supported by the particular ASA platform.
ARP table and bridge-group MAC mapping table when running in

transparent mode.
Routing table, including any dynamically learned routes. All dynamic

routing adjacencies must reestablish after a failover event, but the new
active unit continues to forward traffic based on the previous routing table
state until full reconvergence.
Certain application inspection data, such as General Packet Radio Service

(GPRS), GPRS Tunneling Protocol (GTP), Packet Data Protocol (PDP),
and Session Initiation Protocol (SIP) signaling tables. Keep in mind that
most application inspection engines do not synchronize their databases
because of resource constraints and complexity, so such connections switch
over at the Layer 4 level only. As the result, some of these connections may
90
have to reestablish after a failover event.
Most VPN data structures, including security associations (SA) for site-to-
site tunnels and remote-access users. Only some clientless SSL VPN
information remains stateless.
Stateful failover supports only Cisco ASA software features. The Cisco
ASA FirePOWER module tracks connection state independently, and the
Cisco ASAs do not synchronize their configuration or any other stateful data
in failover. When a Cisco ASA switchover occurs, the Cisco ASA
FirePOWER module typically recovers existing connections transparently
to the user, but some advanced security checks may apply only to new flows
that are established through the newly active Cisco ASA and its local
application module.
In active/active failover, Cisco ASAs operate in multiple-context mode. In

this configuration, the traffic load is split between members of the failover
pair so that each unit is active for some set of security contexts. This way,
both failover peers are passing traffic concurrently and fully utilizing their
respective hardware resources.
Figure 2-18 illustrates active/active failover.
91
Figure 2-18 Active/Active Failover
This separation is achieved by assigning specific application contexts to

one of the two failover groups and then making each of the failover peers
own one of these groups. As opposed to active/standby failover, where all
contexts switch over to the peer on active unit failure, this model localizes
the impact to the contexts in a particular failover group.
In total, an ASA supports three failover groups when configured for

active/active failover:
Group 0: This is a hidden, nonconfigurable group that covers only the

system context. It is always active on the same unit that is active for group 1.
Group 1: All newly created contexts belong to this group by default. The
admin context must always be a member of this group. By default, the
primary unit owns this group, and you typically keep it this way.
Group 2: Use this group to assign some contexts to be active on the

secondary unit. The primary unit also owns this group by default, so you
92
have to change its ownership to the secondary ASA after assigning all the
desired contexts. Keep in mind that both groups have to be active on the
same unit in order to move contexts between groups 1 and 2.
You should deploy active/active failover only when you can effectively
separate the network traffic flows into these two independent groups. Keep
in mind that interface sharing is not supported between contexts that belong
to different failover groups.
Although active/active failover offers some load-sharing benefits, consider

the following implications of this model:
You must be able to separate the traffic flows into multiple contexts such
that no interfaces are shared between contexts in different failover groups.
Keep in mind that not all features are supported in multiple-context mode.
If a switchover occurs, a single physical device must carry the full traffic
load that was originally intended for two ASA units. This effectively
reduces the benefits of load balancing because you should only plan the
overall load on the failover pair for this worst-case scenario with a single
remaining unit.
When using stateful failover, the standby device requires as much

processing power as the active one to create new connections; the only
difference is that the standby unit does not have to accept transit traffic from
the network. When you enable stateful replication with active/active
failover, you significantly reduce the available processing capacity of each
failover pair member.
Generally speaking, active/standby is the preferred deployment model for

failover. Consider clustering instead of active/active failover when your
ASA deployment scenario requires load sharing.
What Happens When the Cisco ASA FirePOWER Module Fails?
If the Cisco ASA FirePOWER module fails, you can configure it to do

either of the following:
Fail open
Fail close
93
When the Cisco ASA FirePOWER module is configured to fail open, all
traffic still passes through the Cisco ASA if the module fails. In contrast,
when the Cisco ASA FirePOWER module is configured to fail close, all
traffic stops through the Cisco ASA if the module fails.
Cisco ASA FirePOWER Services and Clustering
You can configure up to 16 identical Cisco ASA appliances in a cluster to

act as a combined traffic-processing system. When clustering is enabled, the
Cisco ASAs preserve the benefits of failover. In a cluster, virtual IP and
MAC addresses are used for first-hop redundancy.
All cluster members must have identical hardware configuration, SSP types,
application modules, and interface cards.
Figure 2-19 illustrates three Cisco ASAs configured in a cluster.
Figure 2-19 Cisco ASA Cluster
In a Cisco ASA cluster, the configuration is mirrored to all members, and

connection state is preserved after a single member failure.
Clustered Cisco ASA provides flow symmetry and high availability to the
Cisco ASA FirePOWER module. Packets and flows are not dropped by the
Cisco ASA FirePOWER module but instead are marked for “drop” or “drop
with TCP reset” and sent back to the corresponding Cisco ASA. This
methodology allows the Cisco ASA to clear the connection from the state
94
tables and send TCP resets, if needed.
When clustering is configured, stateless load balancing is done via IP

routing or spanned EtherChannel with the Link Aggregation Control
Protocol (LACP). In addition, all Cisco ASA appliances are connected to
the same subnet on each logical interface.
Figure 2-20 shows a Cisco ASA cluster configured with spanned

EtherChannel.
Figure 2-20 Cisco ASA Cluster Configured with Spanned EtherChannel
You can also configure a cluster in individual interface mode. Individual

interface mode is supported in Cisco ASAs configured in routed (Layer 3)
mode only. It is not supported in Cisco ASAs configured in transparent
(Layer 2) mode.
Figure 2-21 shows a Cisco ASA cluster configured in individual interface

mode.
95
Figure 2-21 Cisco ASA Cluster Configured in Individual Interface Mode
In individual interface mode, the cluster master owns the virtual IP on data
interfaces for management purposes only. All members get data interface IP
addresses from IP address pools in the order in which they join the cluster.
Cluster Member Election
When Cisco ASAs are configured in a cluster, one member is elected as the
master, and other Cisco ASAs are slaves. The master may be the first unit to
join the cluster or may be based on a configured priority. A new master is
elected only if the elected master fails. The master unit handles all
management and centralized functions, and the configuration is locked on
slaves.
Figure 2-22 illustrates the steps in the cluster master election process.
Figure 2-22 Cisco ASA Cluster Master Election Process
Step 1. A Cisco ASA with clustering enabled boots and immediately looks
96
for a master within the cluster.
Step 2. It waits 45 seconds before it receives a reply from a master. If no

master is found, it assumes the role of master in the cluster.
Step 3. If a master already exists, the Cisco ASA assumes the role of slave
and synchronizes the configuration with the master Cisco ASA.
Step 4. The master admits one unit at a time.
Step 5. The cluster slave is ready to pass traffic.
There is a virtual IP address ownership for to-the-cluster connections, and

the master and slaves process all regular transit connections equally. If a
master fails, management traffic and other centralized connections must be
reestablished upon master failure.
How Connections Are Established and Tracked in a Cluster
This section explains how connections are established and tracked in a

Cisco ASA cluster configuration.
How a New TCP Connection Is Established and Tracked in a Cluster
Figure 2-23 illustrates how a new TCP connection is established and

tracked within a cluster.
97
Figure 2-23 A New TCP Connection in a Cisco ASA Cluster
Step 1. A new TCP connection attempt is received from the client (TCP
SYN packet).
Step 2. The Cisco ASA that receives the TCP SYN (connection attempt)
becomes the flow owner and adds the TCP SYN cookie. It then delivers the
packet to the server.
Step 3. The server may reply with a TCP SYN ACK (response) through
another unit in the cluster.
Step 4. If another Cisco ASA in the cluster receives the response, it

forwards the packet to the flow owner and becomes the flow forwarder.
Step 5. The flow owner delivers the TCP SYN to the client.
Step 6. The flow owner updates the flow director with the connection
information.
How a New UDP-Like Connection Is Established and Tracked in a Cluster
98
Figure 2-24 illustrates how a new UDP or another pseudo-stateful
connection is established and tracked within a cluster.
Figure 2-24 A New UDP or Another Pseudo-stateful Connection in a

Cisco ASA Cluster
Step 1. A new UDP or another pseudo-stateful connection attempt is

received from the client.
Step 2. The Cisco ASA that receives the connection attempt queries the
flow director to see if a connection already exists for that host.
Step 3. The Cisco ASA that received the packet becomes the flow owner if
no connection was found.
Step 4. The packet is delivered to the server.
Step 5. The flow owner updates the director with the new connection
information.
Step 6. The server responds to the client. If another Cisco ASA in the
cluster receives the response, it forwards the packet to the flow owner and
becomes the flow forwarder.
99
Step 7. The flow forwarder queries the director to see what Cisco ASA is
the flow owner.
Step 8. The director updates the flow forwarder with the flow owner
information.
Step 9. The flow forwarder forwards the server response to the flow
owner.
Step 10. The server response is delivered to the client.
Centralized Connections in a Cluster
There are several Cisco ASA features where connections are centralized,
such as VPN management, application inspection, and AAA for network
access. If a feature is handled in a centralized way, the cluster master
controls all the tasks.
Note
Packets for a nondistributed protocol inspection would have to all be

forwarded to the cluster master for processing.
Centralized connections decrease overall cluster performance because they

increase the processing and packet forwarding required to complete the
given task.
Note
All features that are handled in a centralized way have flows always
residing on the master unit in the cluster.
Figure 2-25 illustrates how a new centralized connection is established and

tracked within a cluster.
100
Figure 2-25 Centralized Connections in a Cisco ASA Cluster
Step 1. A new connection attempt is received from the client.
Step 2. The Cisco ASA that receives the connection attempt recognizes the
centralized feature and redirects the connection attempt to the master.
Step 3. The master becomes the owner and delivers the packet to the server.
Step 4. The master updates the director with the connection information.
What Happens When the Flow Owner Fails
The Cisco ASA clustering feature provides high availability and

redundancy. Figure 2-26 illustrates what happens when a flow owner fails
for some reason.
101
Figure 2-26 Flow Owner Failure
Step 1. A connection is already established between the client and the

server.
Step 2. The flow owner fails. This can be because of a power failure,
hardware failure, or some other event, such as a system crash.
Step 3. The client sends the next packet to the server, and another cluster
member receives the packet.
Step 4. The Cisco ASA that receives the packet queries the director.
Step 5. The director detects that the original flow owner failed and assigns
a new owner.
Step 6. The packet is delivered to the server.
Step 7. The new flow owner updates the flow director.
102
Deploying the Cisco ASA FirePOWER Services in the
Internet Edge
The Cisco ASA FirePOWER module provides unprecedented capabilities

to protect a corporate network from Internet threats. Many organizations of
all sizes deploy the Cisco ASA FirePOWER module at their Internet edge.
Figure 2-27 illustrates a pair of Cisco ASA with FirePOWER modules
deployed in the Internet edge of a corporate office in Raleigh, North
Carolina.
Figure 2-27 Cisco ASA FirePOWER Module in the Internet Edge
Deploying the Cisco ASA FirePOWER Services in VPN

Scenarios
The Cisco ASA FirePOWER module can be deployed in site-to-site and
remote-access VPN environments. As you learned earlier in this chapter, the
decryption process takes place before the packets are sent to the Cisco ASA
FirePOWER module by the Cisco ASA, and the packets are encrypted after
they are inspected by the Cisco ASA FirePOWER module and sent back to
the Cisco ASA.
Figure 2-28 illustrates how a Cisco ASA with the FirePOWER module is
deployed in an office in New York, terminating SSL and IPsec (IKEv2)
VPN tunnels from remote clients in the Internet.
103
Figure 2-28 Cisco ASA FirePOWER Module in a Remote-Access VPN
Scenario
In the example illustrated in Figure 2-28, the remote-access VPN clients are
using the Cisco AnyConnect client; however, clientless SSL VPN is also
supported.
Figure 2-29 illustrates how two Cisco ASAs with FirePOWER modules are
deployed in the headquarters office in New York (ASA 1) and a branch
office in Raleigh, North Carolina (ASA 2), establishing a site-to-site IPsec
VPN tunnel. In addition, ASA 2 in New York is also terminating a site-to-
site IPsec VPN tunnel to a router (R1) of a business partner in Las Vegas.
104
Figure 2-29 Cisco ASA FirePOWER Module in a Site-to-Site IPsec VPN
Scenario
In the example illustrated in Figure 2-29, the Cisco ASA FirePOWER

module not only protects against threats in the corporate network in the
remote branch office but also protects against threats coming from an
unmanaged business partner.
Deploying Cisco ASA FirePOWER Services in the Data

Center
The data center can be a very complex world. It not only provides a rich set
of services and architectures but also hosts the crown jewels of an
organization. It is extremely important to maintain visibility of everything
that is happening in the data center. The concept of “north-to-south” and
“east-to-west” is often used in describing the types of communication (or
flow) within and to the outside of the data center:
North-to-south describes communication between end users and external

entities.
East-to-west describes communication between entities in the data center.
Figure 2-30 illustrates the concepts of north-to-south and east-to-west
105
communication.
Figure 2-30 Data Center North-to-South and East-to-West

Communication
The data center has many different high-throughput and low-latency

requirements, in addition to increased high-availability requirements. In
addition, automated provisioning and control with orchestration, monitoring,
and management tools are crucial.
The data center architecture consists of three primary modular layers with
hierarchical interdependencies:
Data center foundation: This is the primary building block of the data
center, on which all other services rely. Regardless of the size of the data
center, the foundation must be resilient, scalable, and flexible to support
data center services that add value, performance, and reliability. The data
center foundation provides the computing necessary to support the
applications that process information and the seamless transport between
106
servers, storage, and the end users who access the applications.
Data center services: These services include infrastructure components

to enhance the security of the applications and access to critical data. They
also include virtual switching services to extend the network control in a
seamless manner from the foundation network into the hypervisor systems
on servers to increase control and reduce operational costs (as well as other
application resilience services).
User services: These services include email, order processing, and file
sharing or any other applications in the data center that rely on the data
center foundation and services, like database applications, modeling, and
transaction processing.
Figure 2-31 illustrates some of the components of the data center services
architecture.
107
Figure 2-31 The Data Center Services Architecture
Examples of the data center service insertion components include the

following:
Firewalls (In the example illustrated in Figure 2-31, Cisco ASAs with
FirePOWER modules are deployed.)
Intrusion prevention systems (IPS)
108
Application delivery features
Server load balancing
Network analysis tools (such as NetFlow)
Virtualized services deployed in a distributed manner along with virtual

machines
Traffic direction with vPath and Nexus 1000v
Application Centric Infrastructure (ACI) automated framework

components for service insertion
In the case of virtualized environments, the Cisco ASAv (virtual machine)

can be deployed to protect VM-to-VM communication. The Cisco ASA
FirePOWER module in these environments is not supported, as the Cisco
ASAv is just a virtual machine. Cisco FirePOWER virtual machines running
network AMP can be deployed in those scenarios.
Note
The Cisco ASAv supports both traditional tiered data center deployments
and the fabric-based deployments of Cisco ACI environments. The Cisco
ASAv can also be deployed in cloud environments like Amazon Web
Services (AWS).
The Cisco ASA with FirePOWER modules can be deployed in

geographically dispersed cluster environments.
Figure 2-32 shows an example in which four Cisco ASAs with FirePOWER
modules are deployed in two separate sites (site A and site B).
109
Figure 2-32 Cisco ASA FirePOWER Module in a Geographically
Dispersed Data Center
In the example illustrated in Figure 2-32, the cluster of four Cisco ASAs is
fully extended between the two data centers, using the cluster control links
(CCL) operating at Layer 2 with a latency of less than 10 milliseconds. A
single spanned EtherChannel for transient data is used on the cluster side.
The local data links are also configured with EtherChannels at the switch
pairs on each site.
Tip
The data VLANs between the switches are not extended to prevent network
loops.
In Chapter 1 you learned that Firepower Threat Defense software is unified

software that provides next-generation firewall services, including the
following:
Stateful firewall capabilities
Static and dynamic routing
110
Next-generation intrusion prevention systems (NGIPS)
Application visibility and control (AVC)
URL filtering
Advanced Malware Protection (AMP)
In the Cisco ASA, you can use FTD in single context mode and in routed or
transparent mode. Multiple context mode is not supported at this writing.
The following are the Cisco ASA 5500-X models that support a reimage to
run the FTD software:
ASA 5506-X
ASA 5506W-X
ASA 5506H-X
ASA 5508-X
ASA 5512-X
ASA 5515-X
ASA 5516-X
ASA 5525-X
ASA 5545-X
ASA 5555-X
To reimage one of the aforementioned Cisco ASA models, you must meet the
following prerequisites:
You must have a Cisco Smart Account. You can create one at Cisco
Software Central (https://software.cisco.com).
You need to review the FTD software version release notes to become
familiar of the supported features, as Cisco continues to add features very
111
regularly.
Add at least a base FTD license to your Smart Account (for example, L-
ASA5516T-BASE=).
You must have access to an FMC (virtual or physical).
You must have access to the console port of the Cisco 5500-X appliance
on which FTD software will be installed, either directly from the computer
being used for installing FTD software or through a terminal server.
It is a best practice to back up your existing configuration.
Understand that when you reimage and install FTD software on your Cisco
ASA, all previous files and configurations saved on the ASA are lost.
You need to have the required minimum free space (3 GB plus the size of
the boot software) available on the flash (disk0).
You must have an SSD in your Cisco ASA.
You must have access to a TFTP server to host the FTD images.
In Chapter 3, you will learn how to reimage and install the FTD software in
supported Cisco ASA models.
Summary
The Cisco ASA FirePOWER module provides network visibility, policy

enforcement, and advanced threat protection across many organizations and
the entire attack continuum. This chapter starts with an introduction to the
Cisco ASA FirePOWER module. It explains the difference between inline
and promiscuous (monitor-only) deployment modes. This chapter also
covers the different Cisco ASA FirePOWER management options and
provides guidance on what models to use, based on network size and
demands. You have also learned about the Cisco ASA FirePOWER
Services licensing and compatibility issues with other Cisco ASA features.
This chapter also provides a deep dive into the Cisco ASA and the Cisco
FirePOWER module packet-processing order of operations. You have
learned how the Cisco ASA FirePOWER module behaves and is deployed
in failover and clustering configurations. Several deployment scenarios are
112
covered, including deploying Cisco ASA FirePOWER Services at the
Internet Edge, in site-to-site and remote-access VPN scenarios, and in the
data center. At the end of the chapter, you learned a few details about the
FTD software and prerequisites prior to installation on a supported Cisco
ASA model.
113
Chapter 3. Configuring Cisco ASA with
FirePOWER Services
This chapter provides step-by-step guidance on how to set up and configure
the Cisco ASA with FirePOWER Services module. The following topics
are covered in this chapter:
Setting up the Cisco ASA FirePOWER module in Cisco ASA 5585-X

appliances
Setting up the Cisco ASA FirePOWER module in Cisco ASA 5500-X

appliances
Configuring the Cisco ASA to redirect traffic to the Cisco ASA

FirePOWER module
Configuring the Cisco ASA FirePOWER services module for the FMC
Configuring the Cisco ASA FirePOWER module using the Adaptive

Security Device Manager (ASDM)
Setting Up the Cisco ASA FirePOWER Module in Cisco

ASA 5585-X Appliances
In Chapter 2, “Introduction to and Design of Cisco ASA with FirePOWER

Services,” you learned that in the Cisco ASA 5585-X, the Cisco ASA
FirePOWER module includes a separate management interface. All
management traffic to and from the Cisco ASA FirePOWER module must
enter and exit this interface. You also learned that the Cisco ASA
FirePOWER module needs Internet access to perform several operations.
Figure 3-1 shows an example of how you can physically connect the Cisco
ASA FirePOWER module management interface to be able to reach the
Internet by using the Cisco ASA interface.
114
Figure 3-1 Cisco ASA 5585-X Management Interfaces
Figure 3-1 shows the Cisco ASA 5585-X with a module running Cisco ASA
software and a module running FirePOWER Services. The Cisco ASA
software is managed by using the interface named Management 0/0 in this
example. This interface is configured with the IP address 10.10.1.1. The
Cisco ASA FirePOWER module is managed by using the interface named
Management 1/0, configured with the IP address 10.10.1.2.
You can access the Cisco ASA FirePOWER module command-line interface
(CLI) by using the serial console port or Secure Shell (SSH).
Cisco ASA 5585-X appliances have a dedicated console port for the Cisco
ASA FirePOWER module. You can use a DB-9 to RJ-45 serial cable or a
USB serial adapter to connect to the console.
Note
In all other Cisco ASA models, you connect to the Cisco ASA console and
then you connect by using the backplane to the “module” or solid state drive
(SSD) by using the session sfr command. The Cisco ASA 5506-X, Cisco
ASA 5508-X, and Cisco ASA 5516-X also come with a mini-USB console
115
port that you can use.
You can also connect to the Cisco ASA FirePOWER module by using SSH,
with the default IP address.
Table 3-1 lists all the default parameters and credentials of the Cisco ASA
FirePOWER module.
Table 3-1 Cisco ASA FirePOWER Module Default Settings
Installing the Boot Image and Firepower System Software in the Cisco
ASA 5585-X SSP
In order to have a fully functional Cisco ASA FirePOWER module in a

Cisco ASA 5585-X, the boot image needs to first be installed, and then a
system software package needs to be installed as well.
Note
If you purchased a new Cisco ASA with FirePOWER Services, you do not
need to reimage the system to install upgrade packages.
To install the boot image, you need to transfer the image from a TFTP server
to the Management-0 port on the ASA Firepower SSP by logging in to the
module’s Console port.
116
Tip
The Management-0 port is in the first slot on an SSP. This management port
is also known as Management 1/0; however, it appears as Management-0 or
Management 0/1 in ROMMON.
Figure 3-2 illustrates a topology with a Cisco ASA with a Firepower SSP
and a TFTP server. The Cisco ASA Firepower SSP management interface is
configured with IP address 10.10.1.1 and the TFTP server with 10.10.1.2.
Figure 3-2 Firepower SSP TFTP Boot
Follow these steps to install the boot image:
Step 1. Place the boot image and a system software package on the TFTP
server so that they can be accessed by the Cisco ASA FirePOWER module.
Step 2. Connect to the Cisco ASA FirePOWER module through the

Management 1/0 interface. You must use this interface to TFTP boot the boot
image.
Step 3. Reboot the system with the system reboot command.
Step 4. As the system is booting, break out of the boot process by pressing
Esc (the Escape key on your keyboard). If you see grub start to boot the
system, you are too late, and you have to reboot the system again.
Step 5. From the ROMMON prompt, configure the IP address for the
Firepower SSP, the TFTP server address, the gateway, and the boot image
path and filename. The following example shows the configuration used in
this example:
Click here to view code image
ADDRESS=10.10.1.1
117
SERVER=10.10.1.2
GATEWAY=10.1.1.2
IMAGE= asasfr-5500x-boot-6.0.0-1005.img
In this example, the IP address of the Firepower SSP is 10.10.1.1. The

TFTP server address is 10.10.1.2, and the gateway is set to the TFTP server
address, as well. The boot image is asasfr-5500x-boot-6.0.0-1005.img.
After entering the preceding commands, issue the set command to apply the
configuration.
Step 6. Save the settings by using the sync command.
Step 7. Start the download and boot process by using the tftp command.
Note
The boot takes several minutes. When it is finished, you see a login prompt.
Step 8. Log in as admin, with the password Admin123, which is the default
password.
Step 9. Start configuring the system by issuing the setup command.
Step 10. Configure the hostname, which can be up to 65 alphanumeric

characters, with no spaces (though hyphens are allowed).
Step 11. Configure the IP address. You can configure a static IPv4 or IPv6
address or use DHCP (for IPv4) or stateless autoconfiguration if you are
configuring IPv6.
Step 12. Identify at least one DNS server and set the domain name and
search domain.
Note
The management address, the gateway, and DNS information are the key
settings to configure. Administrators often forget to set up the DNS server
correctly, and this causes problems later in the configuration.
118
Step 13. Optionally, enable NTP and configure the NTP servers to set the
system time.
Step 14. Install the system software image by using the system install
[noconfirm] url command. Here is an example:
asasfr-boot> system install http://10.10.1.2/ asasfr-sys-6.0.0-1005.pkg
Note
The noconfirm option skips all the confirmation messages.
The Cisco ASA FirePOWER module reboots when the installation is

complete. This process can take more than 10 minutes. After the Cisco ASA
FirePOWER module boots, you can log in as admin with the password
Sourcefire. You can install the system software image from an HTTP,
HTTPS, or FTP server that is accessible from the ASA SFR management
interface.
Note
Detailed step-by-step configuration options are provided later in this

chapter.
Setting Up the Cisco ASA FirePOWER Module in Cisco

ASA 5500-X Appliances
The following sections cover how to perform the initial setup of the Cisco
ASA FirePOWER module in Cisco ASA 5500-X appliances.
Tip
119
Cisco is always adding new models to its next-generation security
appliances. Visit Cisco’s Firepower compatibility guide to obtain the most
recent information:
www.cisco.com/c/en/us/td/docs/security/firepower/compatibility/firepower-
compatibility.html.
Installing the Boot Image and Firepower System Software in the SSD of
As you have already learned in this chapter, if you purchase a new Cisco
ASA 5500-X appliance with the Cisco ASA FirePOWER module, the
module software and required SSDs come preinstalled and ready to
configure. However, you need to install the Cisco ASA Firepower boot
software, partition the SSD, and install the system software if you are
adding a new Cisco ASA FirePOWER software module to an existing Cisco
ASA or if the SSD needs to be replaced.
Tip
The flash (disk0) should have at least 3 GB of free space plus the space
needed for the boot software in order to perform the reimaging process. If
you are running the Cisco ASA in multi-context mode, you need to complete
the reimaging steps in the system execution space. You also need to shut
down any other modules from the Cisco ASA CLI, as shown in Example 3-
1.
Example 3-1 Shutting Down and Uninstalling the IPS Module
sw-module module ips shutdown

sw-module module ips uninstall
reload
The commands in Example 3-1 shut down and uninstall the IPS software
120
module (if installed on the Cisco ASA) and reboot the Cisco ASA. If you
have a Cisco ASA CX module, you can use the same commands except use
the cxsc keyword instead of ips.
Note
If you are just reimaging the Cisco ASA FirePOWER module, use the sw-
module module sfr shutdown and sw-module module sfr uninstall
commands.
Complete the following steps to install the boot image and the Firepower
system software in the SSD of a Cisco ASA 5500-X appliance:
Step 1. Download the Firepower boot image and system software packages
from Cisco.com.
Step 2. Transfer the boot image to the ASA. You can do this by using the
CLI or the ASDM. If you select to install the image by using the ASDM, you
can place the boot image on your workstation and upload it from there or
you can place it on an FTP, TFTP, HTTP, HTTPS, SMB, or SCP server. In
the ASDM, select Tools > File Management and choose the appropriate
file transfer command, either Between Local PC and Flash or Between
Remote Server and Flash. Figure 3-3 illustrates how to transfer the file
between the remote server and flash.
121
Figure 3-3 ASDM File Transfer
If you choose to transfer the file by using the CLI, place the boot image on a
TFTP, FTP, HTTP, or HTTPS server and then use the copy command to
transfer it to the Cisco ASA flash. To transfer the file by using TFTP, enter
the following command:
RTP-asa# copy tftp://10.10.1.2/asasfr-5500x-boot-5.4.1-69.img

disk0:/asasfr-5500x-boot-5.4.1-69.img
Step 3. Transfer the boot software to disk0 on the ASA.
Step 4. After the boot image is transferred to disk0 (flash), use sw-module
module sfr recover configure image disk0: file to recover the Firepower
module and install the boot image, as demonstrated here:
122
NY-asa# sw-module module sfr recover configure image
disk0:asasfr-5500x-boot-5.4.1-69.img
Step 5. Use the sw-module module sfr recover boot command to load the
Firepower boot image. This takes approximately 5 to 15 minutes.
Step 6. Use the session command to connect to the Firepower module from
the Cisco ASA, as demonstrated in the example that follows. The default
username is admin, and the default password is Admin123:
RTP-asa# session sfr console

Opening console session with module sfr.
Connected to module sfr. Escape character sequence is 'CTRL-^X'.
Cisco ASA SFR Boot Image 5.4.1

asasfr login: admin
Password: Admin123
Note
The session command fails with a message about not being able to connect
over ttyS1 if the module has not completed the boot process.
Step 7. Configure the module so that you can install the system software
package using the setup command, as shown here:
asasfr-boot> setup
Welcome to SFR Setup

[hit Ctrl-C to abort]
Default values are inside []
Enter the hostname, management address, gateway, DNS information, and,

optionally, NTP server. It is very important to enter a correct DNS server to
123
avoid name resolution problems during setup. You can also set the domain
name and search domain.
Step 8. Install the system software image by using the system install
[noconfirm] url command. You can transfer the file using HTTP, HTTPS, or
FTP. The following example demonstrates how to install the system
software image by using HTTP:
asasfr-boot> system install http://10.10.1.3/asasfr-sys-5.4.1-211.pkg

Verifying
Downloading
Extracting
Package Detail
Description: Cisco ASA-Firepower 5.4.1-211
System Install
Requires reboot: Yes
Do you want to continue with upgrade? [y]: y

Warning: Please do not interrupt the process or turn off the system.
Doing so might leave system in unusable state.
Upgrading
Starting upgrade process ...
Populating new system image
Reboot is required to complete the upgrade. Press 'Enter' to reboot the

system.
(press Enter)
Broadcast message from root (ttyS1) (Mon Sep 28 12:12:48 2015):
The system is going down for reboot NOW!

Console session with module sfr terminated.
When the Firepower module reboots and you use the session command to
access the module, you see a different login prompt, as shown in Example
3-2.
Example 3-2 A Functional Firepower Module
124
RTP-asa# session sfr console

Connected to module sfr. Escape character sequence is 'CTRL-^X'.
RTP-sfr login: admin

Password:
Last login: Sun Sep 27 02:02:28 UTC 2015 on ttyS1
Copyright 2001-2013, Sourcefire, Inc. All rights reserved. Sourcefire is

a registered trademark of Sourcefire, Inc. All other trademarks are
property of their respective owners.
Sourcefire Linux OS v5.4.1 (build 43)

Sourcefire ASA5512 v5.4.1 (build 211)
Last login: Sun Sep 27 02:02:28 on ttyS1

>
Configuring of Cisco ASA 5506-X, 5508-X, and 5516-X Appliances
When the Cisco ASA is booted with no configuration, it offers a setup menu
that enables you to assign the initial parameters, such as the device name
and an address for the management interface. You can choose to go through
the initial setup menu for quick configuration. Example 3-3 shows the boot
process (console output) for an ASA 5508.
Example 3-3 Boot Process of the ASA 5508
Rom image verified correctly

Cisco Systems ROMMON, Version 1.1.01, RELEASE SOFTWARE
Copyright (c) 1994-2014 by Cisco Systems, Inc.
Compiled Mon 10/20/2014 15:59:12.05 by builder
Current image running: Boot ROM0
125
Last reset cause: PowerCycleRequest
DIMM Slot 0 : Present
DIMM Slot 1 : Present
Platform ASA5508 with 8192 Mbytes of main memory

MAC Address: 18:8b:9d:ad:79:c1
Use BREAK or ESC to interrupt boot.

Use SPACE to begin boot immediately.
Boot in 10 seconds.
Located '.boot_string' @ cluster 840607.
#
Attempt autoboot: "boot disk0:/asa951-lfbff-k8.SPA"
Located 'asa951-lfbff-k8.SPA' @ cluster 816328.
######################################################################
#####################################################################
#####################################################################
#####################################################################
#####################################################################
#####################################################################
#####################################################################
#####################################################################
####################################################################
LFBFF signature verified.
INIT: version 2.88 booting

Starting udev
Configuring network interfaces... done.
Populating dev cache
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
There are differences between boot sector and its backup.
Differences: (offset:original/backup)
65:01/00
Not automatically fixing this.
Starting check/repair pass.
Starting verification pass.
126
/dev/sdb1: 120 files, 838432/1918808 clusters
dosfsck(/dev/sdb1) returned 0
Processor memory 3754858905
Compiled on Wed 12-Aug-15 12:18 PDT by builders
Total NICs found: 13

i354 rev03 Gigabit Ethernet @ irq255 dev 20 index 08 MAC:
188b.9dad.79c1
ivshmem rev03 Backplane Data Interface @ index 09 MAC:
0000.0001.0002
en_vtun rev00 Backplane Control Interface @ index 10 MAC:
0000.0001.0001
en_vtun rev00 Backplane Int-Mgmt Interface @ index 11 MAC:
0000.0001.0003
en_vtun rev00 Backplane Ext-Mgmt Interface @ index 12 MAC:
0000.0000.0000
Verify the activation-key, it might take a while...
Running Permanent Activation Key: 0x7007c269 0x1098868c 0x54928558
0xa9987ca0
0x081c04af
Licensed features for this platform:

Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 50 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Enabled perpetual
Security Contexts :2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers :4 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 100 perpetual
Total VPN Peers : 100 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
Total UC Proxy Sessions : 320 perpetual
127
Botnet Traffic Filter : Disabled perpetual
Cluster : Disabled perpetual
VPN Load Balancing : Enabled perpetual
Encryption hardware device : Cisco ASA Crypto on-board accelerator

(revision 0x1)
Cisco Adaptive Cisco ASA Software Version 9.5(1)
****************************** Warning
*******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographic

products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by

sending email to [email protected].
******************************* Warning
*******************************
libgcc, version 4.8.1, Copyright (C) 2007 Free Software Foundation, Inc.
libgcc comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the
General
Public License v.3 (http://www.gnu.org/licenses/gpl-3.0.html)
See User Manual (''Licensing'') for details.
libstdc++, version 4.8.23, Copyright (C) 2007 Free Software Foundation,
128
Inc.
libstdc++ comes with ABSOLUTELY NO WARRANTY.
General
Mdadm tools, version 3.2.6, Copyright (C) 1989, 1991 Free Software
Foundation, Inc.
Copyright (C) 2002-2009 Neil Brown <[email protected]>
mdadm comes with ABSOLUTELY NO WARRANTY.
General
Cisco Adaptive Cisco ASA Software, version 9.5

Copyright (c) 1996-2015 by Cisco Systems, Inc.
For licenses and notices for open source software used in this product,
please visit
http://www.cisco.com/go/asa-opensource
Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.

170 West Tasman Drive
San Jose, California 95134-1706
Reading from flash...

!!...
Cryptochecksum (unchanged): e7c1298c 7cf1ea71 242116d3 20270fcc
INFO: Power-On Self-Test in process.

.......................................................................
129
INFO: Power-On Self-Test complete.
INFO: Starting HW-DRBG health test...

INFO: HW-DRBG health test passed.
INFO: Starting SW-DRBG health test...

INFO: SW-DRBG health test passed.
Type help or '?' for a list of available commands.
ciscoasa>
In the first highlighted line in Example 3-3, the Cisco ASA starts loading the
Cisco ASA software image and then verifies the activation key (license
key), as you can see in the other highlighted lines. Then it lists all the open
source licenses used in the software and performs system health checks. At
the end of the boot process you get a prompt, which by default is ciscoasa>;
this prompt changes, however, after you change the device hostname.
In Example 3-4, the Cisco ASA prompts you to specify whether you wish to
go through the interactive menu to preconfigure the device. If you type no,
the interactive menu is not shown, and the Cisco ASA shows the ciscoasa>
prompt. If you type yes, the default option, the Cisco ASA walks you
through the configuration of a number of parameters.
The Cisco ASA shows the default values in brackets ([]) before prompting
you to accept or change them. To accept the default input, press Enter. After
you go through the initial setup menu, the Cisco ASA displays the summary
of the new configuration before prompting you to accept or reject it.
Example 3-4 Cisco ASA Initial Setup Menu
Pre-configure Firewall now through interactive prompts [yes]? yes

Firewall Mode [Routed]:
Enable password [<use current password>]: C1$c0123
Allow password recovery [yes]?
Clock (UTC):
Year [2012]: 2016
130
Month [Jul]: Jan
Day [6]:6
Time [01:08:57]: 21:27:00
Management IP address: 192.168.1.1
Management network mask: 255.255.255.0
Host name: NY-1
Domain name: securemeinc.org
IP address of host running Device Manager: 192.168.1.88
The following configuration will be used:

Enable password: <current password>
Allow password recovery: yes
Clock (UTC): 21:27:00 Jan 6 2016
Firewall Mode: Routed
Management IP address: 192.168.1.1
Management network mask: 255.255.255.0
Host name: NY-1
Domain name: securemeinc.org
IP address of host running Device Manager: 192.168.1.88
Use this configuration and write to flash? yes

Cryptochecksum: 629d6711 ccbe8923 5911d433 b6dfbe0c
182851 bytes copied in 1.190 secs (182851 bytes/sec)

NY-1>
You can assign the initial parameters and features by using either CLI
commands or the ASDM.
Tip
You can rerun the interactive setup process by using the setup command in
configuration mode.
Before you access the ASDM graphical console, you must install the ASDM
software image on the local flash of the Cisco ASA if it is not present
already. The ASDM interface only manages a local Cisco ASA. Therefore,
131
if you need to manage multiple Cisco ASAs, you must install the ASDM
software on all the Cisco ASAs. However, a single workstation can launch
multiple instances of ASDM to manage more than one appliance.
Uploading ASDM
You can use the dir command to determine whether the ASDM software is
installed. If the Cisco ASA does not have an ASDM image, your first step is
to upload an image from an external file server, using one of the supported
protocols. The appliance needs to be set up for basic configuration,
including the following:
Image interface names
Image security levels
Image IP addresses
Image proper routes
After you set up basic information, use the copy command to transfer the
image file, as shown in Example 3-5, where an ASDM file, named asdm-
751.bin, is being copied from a TFTP server located at 172.18.82.10. Verify
the content of the local flash after the file is successfully uploaded.
Example 3-5 Uploading the ASDM Image to the Local Flash
NY-1# copy tftp flash

Address or name of remote host []? 172.18.82.10
Source filename []? asdm-751.bin
Destination filename [asdm-751.bin]? asdm-751.bin
Accessing tftp://172.18.82.10/asdm-715.bin...!!!!!!!!!!!!!!!!!!
! Output omitted for brevity.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Writing file disk0:/asdm-715.bin...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
132
! Output omitted for brevity.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
22658960 bytes copied in 51.30 secs (420298 bytes/sec)
NY-1# dir
Directory of disk0:/
135 -rwx 22834188 06:18:02 Jan 06 2016 asdm-715.bin
136 -rwx 37767168 06:22:46 Jan 06 2016 asa951-smp-k8.bin
4118732802 bytes total (3955822592 bytes free)
Setting Up the Cisco ASA to Allow ASDM Access
When the ASDM file is accessed, the Cisco ASA loads the first ASDM
image that it finds from the local flash. If multiple ASDM images exist in the
flash, use the asdm image command and specify the location of the ASDM
image you want to load. This ensures that the appliance always loads the
specified image when ASDM is launched. The following commands sets up
the Cisco ASA to use asdm-715.bin as the ASDM image file:
NY-1(config)# asdm image disk0:/asdm-751.bin
The Cisco ASA uses the Secure Sockets Layer (SSL) protocol to
communicate with the client. Consequently, the Cisco ASA acts as a web
server to process the requests from the clients. You must enable the web
server on the appliance by using the http server enable command.
The Cisco ASA discards the incoming requests until the ASDM client’s IP
address is in the trusted network to access the HTTP engine. To enable the
HTTP engine and set up the appliance to trust the 192.168.1.0/24 network
connected to the management interface, enter the following commands:
NY-1(config)# http server enable

NY-1(config)# http 192.168.1.0 255.255.255.0 management
133
Note
The SSL VPN implementation on the Cisco ASA requires you to run the
HTTP server on the appliance. Starting with Cisco ASA software version
8.0, you can set up the Cisco ASA to terminate both the SSL VPN and
ASDM sessions on the same interface, using the default port 443. Use
https://<ASAipaddress>/admin to access the GUI for administrative and
management purposes.
Accessing the ASDM
You can access the ASDM interface from any workstation whose IP address
is in the trusted network list. Before you establish the secure connection to
the appliance, verify that IP connectivity exists between the workstation and
the Cisco ASA.
To establish an SSL connection, launch a browser and point it to the

appliance’s IP address. In Figure 3-4, ASDM is accessed by entering
https://192.168.1.1/admin as the URL. The URL is redirected to
https://192.168.1.1/admin/public/index.html.
134
Figure 3-4 Accessing the ASDM URL
The Cisco ASA presents its self-signed certificate to the workstation so that
a secure connection can be established. If the certificate is accepted, the
Cisco ASA prompts you to present authentication credentials. If the ASDM
authentication or enable password is not set up, there is no default username
or password. If the enable password is defined, there is no default
username, and you must use the enable password as the login password. If
user authentication is enabled on the Cisco ASA through use of the aaa
authentication http console command, then those login credentials must be
provided. After a successful user authentication, the appliance presents two
ways to launch ASDM:
Run Cisco ASDM as a local application: The Cisco ASA offers a setup
utility called asdm-launcher.msi, which can be saved to the workstation’s
local hard drive.
135
Run Cisco ASDM as a Java Web Start application: The Cisco ASA
launches ASDM in the client’s browser as a Java applet. This option is not
feasible if a firewall that filters out Java applets exists between the client
and the Cisco ASA.
Note
Running the ASDM as a local application is currently supported on

Windows-based and OS X–based operating systems.
When the ASDM application is launched, it prompts for the IP address of

the Cisco ASA to which you are trying to connect, as well as the user
authentication credentials.
Note
When you first launch the ASDM, the Cisco Smart Call Home functionality
may prompt you to enable error and health information reporting either
anonymously or by registering the product. You can choose not to enable if
you are not interested.
If the user authentication is successful, the ASDM checks the current version
of the installer application and downloads a new copy, if necessary. It loads
the current configuration from the Cisco ASA and displays it in the GUI, as
shown in Figure 3-5.
136
Figure 3-5 ASDM Home Screen
After you have established connectivity to the Cisco ASA, by using either
the CLI or the ASDM, you are ready to start configuring the device. The
following section guides you through basic setup of the Cisco ASA.
Setting Up a Device Name and Passwords
The default device name (also known as the hostname) of a Cisco ASA is
ciscoasa. It is highly recommended that you set a unique device name to
identify the Cisco ASA on the network. In addition, networking devices
usually belong to a network domain. A domain name appends the
unqualified hostnames with the configured domain name. For example, if the
Cisco ASA tries to reach the host secweb by its hostname and the
configured domain name on the Cisco ASA is securemeinc.org, the fully
qualified domain name (FQDN) of the host is secweb.securemeinc.org.
In a new Cisco ASA, you can configure the Telnet and enable passwords.
137
The Telnet password is used to authenticate remote sessions by using either
the Telnet protocol or SSH. Prior to Cisco ASA software version 9.0(2), the
default Telnet password was cisco. In version 9.0(2) and later, you must
define a Telnet password using the password command. In addition, for an
SSH connection, there is no default username or password in version 8.4(2)
and later. You must configure the aaa authentication ssh console command
to enable AAA authentication.
Example 3-6 shows the configuration you use in the CLI. The hostname is
changed using the hostname command, the domain name is changed using
the domain-name command, and the Telnet and enable passwords are
changed using the password and enable password commands, respectively.
Example 3-6 Setting Up the Hostname, Domain Name, and Passwords
ciscoasa# configure terminal

ciscoasa(config)# hostname NY-1
NY-1(config)# domain-name securemeinc.org
NY-1 (config)# password C1$c0123
NY-1 (config)# enable password C1$c0123
Tip
If you view the configuration after adding the passwords, the Cisco ASA
displays the encrypted passwords as follows:
NY-1# show running-config | include pass

enable password 9jNfZuG3TC5tCVH0 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
Configuring an Interface
Cisco ASA appliances come with a number of Fast Ethernet, Gigabit
138
Ethernet, and 10-Gigabit Ethernet interfaces, depending on the platform.
They also include one management interface (Management 0/0) in all one-
rack unit (1 RU) models and two management interfaces (Management 0/0
and Management 0/1) in ASA 5580s and ASA 5585s. In addition, you can
create one or more subinterfaces in each physical interface. The Fast
Ethernet, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces are used to
route traffic from one interface to another, based on the configured policies,
whereas the management interface is designed to establish out-of-band
connections.
The Cisco ASA protects the internal network from external threats. Each
interface is assigned a name to designate its role on the network. The most
secure network is typically labeled as the inside network, whereas the least
secure network is designated as the outside network. For semi-trusted
networks, you can define them as demilitarized zones (DMZs) or any logical
interface name. You must use the interface name to set up the configuration
features that are linked to an interface.
The Cisco ASA also uses the concept of assigning security levels to the
interfaces. The higher the security level, the more protected the interface.
Consequently, the security level is used to reflect the level of trust of this
interface with respect to the level of trust of another interface on the Cisco
ASA. The security level can be between 0 and 100. Therefore, the most
trusted network is placed behind the interface with a security level of 100,
whereas the least protected network is placed behind an interface with a
security level of 0. A DMZ interface should be assigned a security level
between 0 and 100.
Note
When an interface is configured with a nameif command, the Cisco ASA

automatically assigns a preconfigured security level. If an interface is
configured with the name inside, the Cisco ASA assigns a security level of
100. For all the other interface names, the Cisco ASA assigns a security
level of 0.
Cisco ASA enables you to assign the same security level to more than one
interface. If communication is required between the hosts on interfaces at
139
the same security level, use the same-security-traffic permit inter-
interface global configuration command. In addition, if an interface is not
assigned a security level, it does not respond at the network layer.
By default, you do not need to define an access control list (ACL) to permit
traffic from a high security–level interface to a low security–level interface;
however, if you want to restrict traffic flows from a high security–level
interface destined to a low security–level interface, you can define an ACL.
If you configure an ACL for traffic originating from a high security–level
interface to a low security–level interface, it disables the implicit permit
from that interface. All traffic is now subject to the entries defined in that
ACL.
An ACL must explicitly permit traffic traversing the security appliance from
a lower to a higher security–level interface of the firewall. The ACL must
be applied to the lower security–level interface or globally.
The most important parameter under the interface configuration is the

assignment of an IP address. This is required if an interface is to be used to
pass traffic in a Layer 3 firewall, also known as routed mode. An address
can be either statically or dynamically assigned. For a static IP address, you
configure an IP address and its respective subnet mask.
The Cisco ASA also supports interface address assignment through a

Dynamic Host Configuration Protocol (DHCP) server and by using PPPoE.
Assigning an address by using DHCP is a preferred method if an ISP
dynamically allocates an IP address to the outside interface. You can also
inform the Cisco ASA to use the DHCP server’s specified default gateway
as the default route if the Obtain Default Route Using DHCP option is
enabled in the ASDM. You can do this in the CLI by issuing the ip address
dhcp [setroute] interface subcommand.
Note
If a Cisco ASA is deployed in transparent mode, the IP address is assigned

in global configuration mode or on a bridge virtual interface (BVI)
interface, depending of the version of code.
Assigning an interface address through DHCP is not supported if used with
140
failover.
To configure a physical interface on a Cisco ASA by using ASDM, navigate

to Configuration > Device Setup > Interfaces, select an interface, and
click the Edit button.
Example 3-7 shows how to enable the GigabitEthernet0/0 interface as the

outside interface and assigns a security level of 0. The IP address is
209.165.200.225 with a mask of 255.255.255.224.
Example 3-7 Enabling an Interface
NY-1# configure terminal

NY-1(config)# interface GigabitEthernet0/0
NY-1(config-if)# no shutdown
NY-1(config-if)# nameif outside
NY-1(config-if)# security-level 0
NY-1(config-if)# ip address 209.165.200.225 255.255.255.224
The ASDM enables you to configure the speed, duplex, and media type on
an interface by opening the Edit Interface dialog box for the interface and
clicking the Configure Hardware Properties button. By default, the speed
and duplex are set to auto and can be changed to avoid link negotiations. If
the speed and duplex settings do not match the speed and duplex settings on
the other end of the Ethernet connection, you may see packet loss and
experience performance degradation. The media type is either RJ-45 for
copper-based interfaces or SFP for fiber-based interfaces. RJ-45 is the
default media type.
Tip
The Ethernet-based interfaces on the Cisco ASA 5500 Series use the auto-
MDI/MDIX (media-dependent interface/media-dependent interface
crossover) feature, which does not require a crossover cable when
connecting interfaces of two similar types. These interfaces perform an
internal crossover when a straight network cable connects two similar
141
interfaces. This feature works only when both the speed and duplex
parameters are set to auto-negotiate.
Example 3-8 shows the outside interface set up with a connection speed of
1000 Mbps, using full-duplex mode.
Example 3-8 Configuring Speed and Duplex on an Interface
NY-1# configure terminal

NY-1(config)# interface GigabitEthernet0/0
NY-1(config-if)# speed 1000
NY-1(config-if)# duplex full
The Cisco ASA shows the output of interface-related statistics when you
issue the show interface command from the CLI. Example 3-9 shows
GigabitEthernet0/0 set up as the outside interface and has an IP address of
209.165.200.225 and GigabitEthernet0/1 set up as the inside interface with
an IP address of 192.168.10.1. This command also shows the packet rate
and the total number of packets entering and leaving the interface.
Example 3-9 show interface Command Output
NY-1# show interface

Interface GigabitEthernet0/0 "outside", is up, line protocol is up
Hardware is i82574L rev00, BW 1000 Mbps, DLY 10 usec
Full-duplex, 1000 Mbps
MAC address 000f.f775.4b53, MTU 1500
IP address 209.165.200.225, subnet mask 255.255.255.224
70068 packets input, 24068922 bytes, 0 no buffer
Received 61712 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
13535 packets output, 7196865 bytes, 0 underruns
142
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
input queue (curr/max packets): hardware (0/1) software (0/11)
output queue (curr/max packets): hardware (0/19) software (0/1)
Traffic Statistics for "outside":
70081 packets input, 23044675 bytes
13540 packets output, 6992176 bytes
49550 packets dropped
1 minute input rate 1 pkts/sec, 362 bytes/sec
1 minute output rate 1 pkts/sec, 362 bytes/sec
1 minute drop rate, 0 pkts/sec
Interface GigabitEthernet0/1 "inside", is up, line protocol is up
Hardware is i82546GB rev03, BW 1000 Mbps, DLY 10 usec
Auto-Duplex(Full-duplex), Auto-Speed(1000 Mbps)
MAC address 000f.f775.4b55, MTU 1500
IP address 192.168.10.1, subnet mask 255.255.255.0
1447094 packets input, 152644956 bytes, 0 no buffer
Received 1203884 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
20425 L2 decode drops
332526 packets output, 151244141 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
input queue (curr/max packets): hardware (0/1) software (0/14)
output queue (curr/max packets): hardware (0/26) software (0/1)
Traffic Statistics for "inside":
777980 packets input, 80481496 bytes
151736 packets output, 85309705 bytes
395607 packets dropped
143
Configuring the Cisco ASA to Redirect Traffic to the Cisco
ASA FirePOWER Module
As you learned in Chapter 2, you can configure the Cisco ASA FirePOWER
module in inline mode or in monitor-only mode. Follow these steps to
configure the Cisco ASA to redirect traffic to the Cisco ASA FirePOWER
module in inline mode or monitor-only mode:
Step 1. Log in to the ASDM.
Step 2. Navigate to Configuration > Firewall > Service Policy Rules.
Note
If you previously had a legacy IPS module or CX module configured and an

active service policy in the Cisco ASA, you must remove that policy before
you configure the Cisco ASA FirePOWER Services policy. If your Cisco
ASA is running in multiple context mode, you must configure the service
policy within each security context.
Step 3. Click the Add button to add a new service policy rule. The screen
shown in Figure 3-6 appears.
144
Figure 3-6 Adding a New Service Policy
Step 4. Specify whether the policy will apply to a particular interface or

globally and click Next. In this example, the policy will apply globally.
Step 5. After you click Next, the screen shown in Figure 3-7 appears.
145
Figure 3-7 Adding the New Traffic Class
Step 6. Enter the name of the new traffic class (for example, firePOWER-
class).
Step 7. Enter an optional description.
Step 8. Optionally specify criteria for the traffic that will be matched and
sent to the Cisco ASA FirePOWER module or use the default class (class-
default). In this example, the class will match all traffic because the Any
traffic checkbox is checked under the Traffic Match Criteria field.
Step 9. Click Next. The Rule Actions page shown in Figure 3-8 appears.
146
Figure 3-8 The Rule Actions Page
Step 10. Navigate to the ASA Firepower Inspection tab and check the
Enable ASA Firepower for this traffic flow checkbox, as shown in Figure
3-8.
Step 11. Optionally configure the Cisco ASA to pass traffic if the Cisco
ASA FirePOWER module fails (this is referred to as “fail open”) or
configure the Cisco ASA to stop all traffic (or “fail close”). In Figure 3-8,
the Cisco ASA is configured to fail open because the Permit traffic option
is selected in the If ASA Firepower Card Fails area.
Step 12. Optionally check Enable Monitor Only to send a read-only copy
of traffic to the module. This is also referred to as “inline tap mode.” (By
default, the Cisco ASA sends all traffic to the Cisco ASA FirePOWER
module in inline mode.) In Figure 3-8, the Cisco ASA is configured to send
all traffic to the Cisco ASA FirePOWER module, and the module is
configure in inline mode.
Step 13. Click Finish. The new service policy is shown on the Service
147
Policy Rules page in ASDM, as shown in Figure 3-9.
148
Figure 3-9 The New firePOWER-class Traffic Class
Example 3-10 shows the command-line interface (CLI) commands that were
applied on the Cisco ASA by ASDM.
Example 3-10 Configuring the Service Policy Using the CLI
! The class map

class-map firePOWER-class
description class to send all traffic to the Firepower module
! Matching all traffic to be sent to the Firepower module
match any
!
! Applying the class to the policy map
policy-map global_policy
class firePOWER-class
! The Firepower module configured to fail open
149
sfr fail-open
!
! Applying the policy map to the service policy
service-policy global_policy global
Configuring the Cisco ASA FirePOWER Module for the

FMC
You can register the Cisco ASA FirePOWER module to the Firepower
Management Center (FMC). Chapter 12, “Reporting and Troubleshooting
with Cisco Next-Generation IPS,” covers the FMC in detail. Complete the
following steps to register the Cisco ASA FirePOWER module to the FMC:
Step 1. Log in to the Cisco ASA FirePOWER module.
Step 2. Use the configure manager command as shown in the following

example:
configure manager add 192.168.1.89 thisISaRegKey
In this example, the IP address of the FMC is 192.168.1.89. You can also
use the DNS hostname or an IPv6 address (if IPv6 is enabled in your
network). If the FMC is not directly addressable, use the DONTRESOLVE
keyword. In this example, the registration key is thisISaRegKey. The
registration key is a unique alphanumeric registration key required to
register a Cisco ASA FirePOWER module to the FMC. You can also enter
an optional alphanumeric string (nat_id) that is used during the registration
process between the FMC and the ASA FirePOWER module. This is
required if the DONTRESOLVE keyword is used. In deployments where
Network Address Translation (NAT) is configured, you must provide a
hostname or an IP address either when you are configuring remote
management or when you are adding the managed appliance. A self-
generated alphanumeric registration key up to 37 characters in length
identifies the connection. You can configure an optional unique
alphanumeric NAT ID (nat_id) that can help the FMC establish
communications in a NAT environment. The NAT ID must be unique among
all NAT IDs used to register managed appliances.
150
Step 3. Type exit to exit the configuration mode.
Configuring the Cisco ASA FirePOWER Module Using the

ASDM
You can use the ASDM to configure the Cisco ASA FirePOWER module in
only certain platforms, including the Cisco ASA 5506-X, 5506H-X,
5506W-X, 5508-X, and 5516-X appliances.
Note
For additional compatibility information, visit

www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html#48552
The following sections covers how to configure the Cisco ASA

FirePOWER module using the ASDM in supported platforms.
Configuring Access Control Policies
To view the access control policies that are applied in the Cisco ASA
FirePOWER module, navigate to Configuration > ASA FirePOWER
Configuration > Policies > Access Control Policy, as shown in Figure 3-
10.
151
Figure 3-10 Firepower Access Control Policy
Creating a New Access Control Policy
Follow these steps to create a new access control policy in the Cisco ASA
FirePOWER module:
Step 1. Click the New Policy button. The dialog shown in Figure 3-11
appears.
152
Figure 3-11 Creating a New Access Control Policy
Step 2. Enter a name for the new access policy. In this example, the name of
the new policy is myPolicy.
Step 3. Enter an optional description for the policy.
Step 4. Set Default Action to either Block all traffic or Intrusion

Prevention. If you select the default action to Block all traffic, all traffic
will be blocked without further inspection. In this example, the default
action is set to Intrusion Prevention. When you first create an access
control policy, you cannot choose to trust traffic as the default action. If you
want to trust all traffic by default, change the default action after you create
the policy. You can also use and modify the initial system-provided policy
named Default Trust All Traffic. Figure 3-12 shows the Default Action
dropdown menu options.
153
Figure 3-12 Default Action Dropdown Menu Options
You can also copy an existing policy from this ASA FirePOWER module or
import a policy from another ASA FirePOWER module.
As previously mentioned, in this example, Intrusion Prevention is set as the

default action. Therefore, the Cisco ASA FirePOWER module creates a
policy with the Intrusion Prevention: Balanced Security and
Connectivity default action.
Step 5. Click Store ASA Firepower Changes.
Adding Rules to the Access Control Policy
You can more granularly control network traffic by adding rules to an access
control policy. The rules within an access control policy are organized
using a numbering scheme starting at 1. The Firepower system matches
traffic to access control rules by ascending rule number. Typically, the
Firepower system process network traffic according to the first access
control rule, where all the rule’s conditions match the traffic. These
154
conditions include the following:
Security zone
Network or geographical location
Ports
Applications
Requested URLs
Users
To add a rule, click the Add Rule button, and the screen shown in Figure 3-
13 appears.
155
Figure 3-13 Adding a New Rule
Each rule also has an action that determines whether you monitor, trust,
block, or allow matching traffic. When you allow traffic, you can specify
that the system first inspect it with intrusion or file policies to block any
exploits, malware, or prohibited files before they reach your assets or exit
your network. On the other hand, after the system trusts or blocks traffic, it
does not perform further inspection. Figure 3-14 shows the Action
dropdown menu options.
156
Figure 3-14 Action Dropdown Menu Options
To configure rules based on security zones, navigate to the Zones tab. You
can also configure rule conditions to match network or geographical
locations. Figure 3-15 shows how to configure a rule condition based on
geographical location of the source and destination networks. For instance,
you can block or allow traffic that is sourced or destined to a given
geographical location. In Figure 3-15, the source networks are based in
North America (geolocation), and the destination networks are in Asia.
Figure 3-15 Rules Based on Geolocation
Cisco Security Intelligence–based traffic filtering and some decoding and

preprocessing occur before network traffic is evaluated by access control
rules. The system matches traffic to access control rules in the order you
specify. In most cases, the system handles network traffic according to the
157
first access control rule where all the rule’s conditions match the traffic.
Some of the filtering capabilities may rely on Layer 7 (application)
information, where the actual flow of the application may not be determined
until a few packets are analyzed in the communication between two or more
hosts. Conditions can be simple or complex; you can control traffic by
security zone, network or geographical location, port, application, requested
URL, and user.
You can also create rules based on the type and the risk of the application.
Figure 3-16 shows how to create a rule based on application conditions, on
the Applications tab.
Figure 3-16 Rules Based on Application Risk and Type
Figure 3-17 shows how to use the Ports tab to create a rule based on given
application ports. You can select predefined ports/applications such as FTP,
Bittorrent, DNS over TCP or UDP, and so on.
158
Figure 3-17 Rules Based on Ports
You can also create rules that match known URLs to sites known to be
hosting pornography, drug content, dating sites, and many other categories.
The URL filtering license is required in order to configure and enable rules
based on URLs. Figure 3-18 shows how to use the URLs tab to configure a
rule based on URL categories.
Figure 3-18 Rules Based on URL Categories
Security Intelligence
Security Intelligence from Cisco is available as a first line of defense

against malicious Internet sites and known malicious IP addresses. You can
configure this feature to instantly blacklist (block) connections based on the
159
latest reputation intelligence from Cisco Talos. You can configure access
control policies with whitelists and blacklists, based on Cisco Talos
Security Intelligence by navigating to the Security Intelligence tab under a
given access policy, as shown in Figure 3-19.
160
Figure 3-19 Security Intelligence Tab
You can override blacklists with custom whitelists in order to ensure

continual access to critical resources. This traffic filtering takes place
before any other policy-based inspection, analysis, or traffic handling,
including rules and the default action.
HTTP Responses
You can customize a web page for blocked URLs. When the system blocks a
given HTTP web request, you can customize what the user sees in a web
browser depending on how the session is blocked. For example, you can
select Block or Block with reset to deny the connection. A blocked session
times out; the system resets Block with reset connections. On the other hand,
for both blocking actions, you can override the default browser or server
page with a custom page that explains that the connection was denied. The
Cisco ASA Firepower system calls this custom page an HTTP response
page.
You can edit the block response page by navigating to the HTTP Responses
161
tab under the access control policy, as shown in Figure 3-20.
162
Figure 3-20 Customizing Block Response Pages
If you set the Cisco ASA FirePOWER module action to Interactive Block
or Interactive Block with reset, you can configure an interactive HTTP
response page that warns users but also allows them to click a button to
continue or refresh the page to load the originally requested site. Users may
have to refresh after bypassing the response page to load page elements that
did not load. You can either display a generic system-provided response
page or enter custom HTML, as shown in Figure 3-21.
163
Figure 3-21 Customizing Interactive Block Response Pages
Access Control Policy Advanced Settings
The advanced access control policy settings typically require little or no

modification because the default settings are appropriate for most
deployments. However, you can also customize the following advanced
settings (see Figure 3-22):
General Settings: You can customize the number of characters you store
in the Cisco ASA FirePOWER module database for each URL requested by
users.
Network Analysis and Intrusion Policies: You can change the access
control policy’s default intrusion policy and associated variable set, which
are used to initially inspect traffic before the system can determine exactly
how to inspect that traffic. You can also change the access control policy’s
default network analysis policy, which administers many preprocessing
options. In addition, you can use custom network analysis rules and network
analysis policies to tailor preprocessing options to specific security zones
164
and networks.
File and Malware Settings: You can set performance options for file
control, file storage, and advanced malware protection.
Transport/Network Layer Preprocessor Settings: You can create

preprocessor settings that are applied globally to all networks, zones, and
VLANs where you apply your access control policy.
Detection Enhancement Settings: You can use adaptive profiles to

improve reassembly of packet fragments and TCP streams in passive
deployments, based on your network’s host operating systems.
Performance Settings and Latency-Based Performance Settings: You

can tune and improve the performance of your system as it analyzes traffic
for attempted intrusions.
165
Figure 3-22 Access Control Rules Advanced Settings
Configuring Intrusion Policies
You can configure intrusion policies by navigating to Configuration > ASA

FirePOWER Configuration > Policies > Intrusion Policy, where you can
view your current custom intrusion policies, edit them, or create new ones.
To create a new intrusion policy, click Create Policy to display the screen
166
Figure 3-23 Creating a New Intrusion Policy
You must provide a name for the new intrusion policy, specify a base policy,
and specify drop behavior.
The Drop when Inline setting defines how the Firepower module handles
drop rules (intrusion or preprocessor rules whose rule state is set to Drop
and Generate Events) and other intrusion policy configurations that affect
traffic. You should enable drop behavior in inline deployments when you
want to drop or replace malicious packets.
Note
In Cisco ASA FirePOWER modules that are configured in passive mode,

the system cannot affect traffic flow, regardless of the drop behavior.
The base policy sets the intrusion policy’s default settings. You can use
either a system-provided or custom policy as your base policy. Figure 3-23
167
shows the Base Policy dropdown menu options.
You can edit an intrusion policy by navigating to Configuration > ASA

FirePOWER Configuration > Policies > Intrusion Policy and clicking the
pencil (edit) button; the screen shown in Figure 3-24 appears.
168
Figure 3-24 Editing an Intrusion Policy
To customize how rules are displayed in the intrusion policy or sort rules by
several criteria, click Manage Rules to display the screen shown in Figure
3-25.
169
Figure 3-25 Managing Rules Under an Intrusion Policy
In the page shown in Figure 3-25, you can also display the details for a
specific rule to see rule settings, rule documentation, and other rule settings.
This page has four key categories:
Filtering features
Rule attribute menus
Rules listing
Rule details
Note
The column headers relate to the menus in the menu bar, where you access
those configuration items.
170
Custom Rules
You can create custom rules or edit or clone existing ones by navigating to
Configuration > ASA FirePOWER Configuration > Policies > Intrusion
Policy > Rule Editor (see Figure 3-26).
171
Figure 3-26 The Rule Editor
To modify an existing rule, click the pencil icon next to the specific rule.
You can also import rules from another system by clicking the Import Rules
button to display the screen shown in Figure 3-27.
172
Figure 3-27 Importing Rules
New vulnerabilities are reported daily by many vendors in the industry.

Cisco Talos releases rule updates that you can first import onto your Cisco
ASA Firepower module and then implement by applying affected access
control, network analysis, and intrusion policies.
Tip
Rule updates are cumulative, and Cisco recommends that you always import
the latest update. You cannot import a rule update that either matches or
predates the version of the currently installed rules. Rule updates may
contain new binaries, so make sure your process for downloading and
installing them complies with your security policies. In addition, rule
updates may be large, so import rules during periods of low network use.
If you are an advanced user, you can create a new rule by clicking Create
Rule in the main rule editor page (refer to Figure 3-26). The screen shown
173
in Figure 3-28 appears.
174
Figure 3-28 Creating a Custom Rule
When creating a custom standard text rule, you set the rule header settings
and the rule keywords and arguments. After you create a custom rule, you
can search for it by using the rule number. The format of the rule number is
as follows:
GID:SID:Rev
The rule number for all standard text rules starts with 1. The second part of
the rule number, the Snort ID (SID), indicates whether the rule is a local
rule or a rule provided by Cisco. Snort IDs for custom rules start at
1,000,000, and the SID for each new local rule is incremented by 1. The last
part of the rule number is the revision number. Each time you edit a custom
rule, the revision number increments by 1.
You enter the message you want displayed with the event in the Message
field. The Classification dropdown menu allows you to select a
classification to describe the type of event. Figure 3-29 shows examples of
the options available in the Classification dropdown menu.
175
Figure 3-29 Event Type Classification
The Action list allows you to define the type of rule you are creating (alert
to create an alert or pass to create a rule that ignores traffic that triggers the
rule). You can select from the Protocol dropdown menu the traffic protocol
(tcp, udp, icmp, or ip) of packets you want the rule to inspect.
The Direction dropdown menu allows you to select the operator that
indicates which direction of traffic you want to trigger the rule.
You can also define the source and destination IP addresses and ports that
should trigger the rule. Select Directional under the Direction dropdown
menu to match traffic that moves from the source IP address to the
destination IP address. Select Bidirectional to match traffic that moves in
either direction.
You can select the detection options under the Detection Options
dropdown menu and click the Add Option button. Figure 3-30 shows
examples of the different detection options available.
176
Figure 3-30 New Rule Detection Option
Configuring File Policies
You can configure file policies in a Cisco ASA FirePOWER module to

perform advanced malware protection and file control. You can configure
file policies by navigating to Configuration > ASA FirePOWER
Configuration > Policies > Files. To create a new file policy, click the New
File Policy button to open the dialog shown in Figure 3-31.
177
Figure 3-31 Creating a New File Policy
Enter the name of the new file policy and a description and then click the
Store ASA FirePOWER Changes button. The screen shown in Figure 3-32
appears.
178
Figure 3-32 The New File Policy
The policy has two access control rules, both of which use the Allow action
and are associated with file policies. The policy’s default action is also to
allow traffic, but without file policy inspection. A file policy, like its parent
access control policy, contains rules that determine how the system handles
files that match the conditions of each rule. You can configure file rules to
take different actions for different file types, application protocols, or
directions of transfer. To add a new file rule, click the Add File Rule button.
The Add File Rule screen shown in Figure 3-33 appears.
179
Figure 3-33 Adding a New File Rule
Note
Each file rule has an associated action that determines how the system
handles traffic that matches the conditions of the rule.
You can set separate rules within a file policy to take different actions for
different file types, application protocols, or directions of transfer.
The rule actions can be configured to the following:
Detect Files: To log the detection of specific file types while still
allowing their transmission
Block Files: To block specific file types
Malware Cloud Lookup: To log the malware disposition of files

traversing the network based on a cloud lookup, while still allowing their
transmission
Block Malware: To calculate the SHA-256 hash value of specific file

types, use a cloud lookup process to first determine whether files traversing
the network contain malware, and block files that represent threats
You can select different file type categories in the File Type Categories
180
section and select or search for specific file types under the File Types
section (refer to Figure 3-33). Click the Add button to add file categories
and file types.
Reusable Object Management
The Cisco ASA FirePOWER module allows you to create named objects,
which are reusable configurations that associate a name with a value so that
a named object is used instead. You can configure the following object
types:
Network-based objects that represent IP addresses and networks,

port/protocol pairs, security zones, and origin/destination country
(geographical location)
Security Intelligence feeds and lists
Application filters
Ports
URLs
File lists
Intrusion policy variable sets
You can use these objects in various places in the ASA FirePOWER
module, including access control policies, network analysis policies,
intrusion policies and rules, reports, dashboards, and so on. You can
configure these objects by navigating to Configuration > ASA
FirePOWER Configuration > Object Management.
Keeping the Cisco FirePOWER Module Up-to-Date
Cisco provides different types of updates for the Cisco ASA FirePOWER
module, including the following:
Major and minor updates to the module software itself (patches, feature
updates, and major updates)
181
Rule updates
Geolocation database (GeoDB) updates
Vulnerability database (VDB) updates
Patches include a limited range of fixes and usually change the fourth digit
in the version number (for example, 5.4.2.1). Feature updates are more
comprehensive than patches and generally include new features and usually
change the third digit in the version number (for example, 5.4.3). Major
updates include new features and functionality and may involve large-scale
changes and usually change the first or second digit in the version number
(for example, 5.4 or 5.5).
To apply and upload product updates, go to Configuration > ASA

FirePOWER Configuration > Updates, navigate to the Product Updates
tab, and click Upload Update, as shown in Figure 3-34.
182
Figure 3-34 Applying Product Updates
VDB updates affect the database of known vulnerabilities to which hosts

may be susceptible. Intrusion rule updates provide new and updated
intrusion rules and preprocessor rules, modified states for existing rules,
and modified default intrusion policy settings.
Tip
Rule updates may also delete rules, provide new rule categories and default
variables, and modify default variable values.
To configure or upload rule updates, go to Configuration > ASA

FirePOWER Configuration > Updates and navigate to the Rule Updates
tab, as shown in Figure 3-35.
183
Figure 3-35 Applying Rule Updates
Cisco recommends that you always import the latest update. You can apply
one-time rule updates or set the interval of recurring rule update imports.
Note
Rule updates are cumulative. You cannot import a rule update that either
matches or predates the version of the currently installed rules.
Geolocation updates provide updated information on physical locations

with detected routable IP addresses. As you learned earlier in this chapter,
you can use geolocation data as a condition in access control rules. To
configure or upload geolocation updates, go to Configuration > ASA
FirePOWER Configuration > Updates and navigate to the Geolocation
Updates tab, as shown in Figure 3-36.
184
Figure 3-36 Applying Geolocation Updates
You can import a one-time geolocation update or configure recurring

updates, as shown in Figure 3-36.
Firepower Threat Defense
As you learned in previous chapters, the Cisco Firepower Threat Defense

(FTD) software can run on the following Cisco ASA models:
Cisco ASA 5506-X
Cisco ASA 5506H-X
Cisco ASA 5506W-X
Cisco ASA 5512-X
Cisco ASA 5515-X
Cisco ASA 5516-X
185
Cisco ASA 5525-X
Cisco ASA 5545-X
Cisco ASA 5555-X
Note
Cisco is always adding new models to its next-generation security

appliances. You should visit the Cisco Firepower compatibility guide to
obtain the most recent information:
www.cisco.com/c/en/us/td/docs/security/firepower/compatibility/firepower-
compatibility.html.
Installing FTD Boot Image and Software
FTD provides next-generation firewall services, including stateful

firewalling, dynamic routing, next-generation intrusion prevention systems
(NGIPS), Application Visibility and Control (AVC), URL filtering, and
Advanced Malware Protection (AMP) in a unified system image. You can
use an FTD device in single-context mode and in routed or transparent
mode.
If you are deploying a Cisco ASA 5506-X, Cisco ASA 5508-X, or Cisco
ASA 5516-X, you must run ROMMON version 1.1.8 or later. You can
transfer the new ROMMON image by using the copy command, as
mentioned previously in this chapter. Once you copy the ROMMON image,
you can use the upgrade rommon disk0: rommon-image command to
upgrade the ROMMON in the system. The Cisco ASA then updates the
ROMMON and reboots the system.
To install the FTD software in a supported Cisco ASA, you use the same
procedure you learned earlier: You first install the boot image in ROMMON
by pressing Esc during the boot process, and then, at the ROMMON prompt,
enter set and configure the following parameters to establish temporary
connectivity to the TFTP server:
ADDRESS: The management IP address of the Cisco ASA.
186
SERVER: The IP address of the TFTP server.
GATEWAY: The gateway address to the TFTP server. If the TFTP server
is directly attached to Management 1/0, use the IP address of the TFTP
server. If the TFTP server and management address are on the same subnet,
do not configure the gateway, or TFTP boot will fail.
IMAGE: The boot image path and image name on the TFTP server. For
example, if you place the file on the TFTP server in
/tftpboot/images/filename, the IMAGE value is images/ftd-boot-
version.cdisk or ftd-boot-version.lfbff.
After you enter that information, use the sync command to save the settings
and issue the tftpdnld command to initiate the download and boot process.
The OS image should begin downloading through TFTP. When the OS
download is complete, the system automatically boots with the image it just
downloaded and stops at the boot CLI prompt.
After installing the boot image, use the setup command to enter the
management IP address, subnet mask, and gateway and then use the system
install [noconfirm] url command (as discussed earlier) to transfer and
install the FTD software:
> system install http://10.10.10.123/ftd-6.0.1-123.pkg
After the FTD image is installed, choose Yes when the appliance reboot
option is displayed. The Cisco ASA reboots, and the system prompts you
for a username and password when the reboot is complete. At this point, the
OS and package installation is complete.
FTD Firewall Mode
The FTD software supports routed and transparent firewall modes, just like
the legacy Cisco ASA software. The default is routed. In transparent mode
you can create up to 250 bridge groups, with 4 interfaces per bridge group.
In devices configured in transparent mode, the diagnostic interface updates
the MAC address table in the same manner as a data interface; therefore,
you should not connect both a diagnostic interface and a data interface to the
187
same switch unless you configure one of the switch ports as a routed port.
Otherwise, if traffic arrives on the diagnostic interface from the physically
connected switch, FTD updates the MAC address table to use the diagnostic
interface, instead of the data interface, to access the switch. This action
causes a temporary traffic interruption; the FTD device does not re-update
the MAC address table for packets from the switch to the data interface for
at least 30 seconds for security reasons.
To change the firewall mode in FTD, you can use the configure firewall
[routed | transparent] command, as demonstrated here:
> configure firewall transparent

This will destroy the current interface configurations, are you sure that you
want
to proceed? [y/N] y
The firewall mode was changed successfully.
FTD Interface Types
There are three general types of interfaces in FTD:
Management interface
Diagnostic interface
Routed mode deployment
The management interface is a dedicated interface for management tasks and

registering the device to the FMC. It runs a separate SSH server and uses its
own local authentication, IP address, and static routing. To configure its
settings by using the CLI, you can use the configure network command or
change the IP address in the FMC by navigating to Devices > Device
Management > Devices > Management.
The diagnostic interface only allows management traffic and does not allow
through traffic. You can configure the diagnostic logical interface along with
the rest of the data interfaces in the FMC by navigating to Devices > Device
Management > Interfaces. Using the diagnostic interface is optional. The
188
diagnostic interface and data interfaces can be used to communicate with
external LDAP or RADIUS servers for authentication.
Tip
Cisco recommends that you not configure the diagnostic interface and, in
fact, suggests that you remove the name for this interface if you do not have
an inside router. The major benefit of disabling the diagnostic interface is
that you can place the management interface on the same network as any
other data interfaces. If you leave the diagnostic interface configured, its IP
address must be on the same network as the management IP address, and it
counts as a regular interface that cannot be on the same network as any other
data interfaces. Because the management interface requires Internet access
for updates, putting the management interface on the same network as an
inside interface means you can deploy the FTD device with only a switch on
the inside and point to the inside interface as its gateway.
FTD Security Zones
Each interface must be assigned to a single security zone. This is the same
principle you learned earlier, with Cisco ASA running Firepower Services.
You apply security policy based on zones. For instance, you can configure
your access control policy to enable traffic to go from inside to outside but
not from outside to inside, for example. You can create security zones in the
FMC by navigating to the Objects page.
You can also add a security zone can when you are configuring an interface.
You can only add interfaces to the correct zone type for your interface—
either Passive, Inline, Routed, or Transparent zone types.
Note
The diagnostic and management interfaces cannot belong to a security zone.
Static and Dynamic Routing in FTD
189
FTD supports static routes and the following dynamic routing protocols:
OSPF
BGP
RIP
To add a static route, follow these steps:
Step 1. Log in to the FMC, navigate to Devices > Device Management,

and edit the FTD device. Then select the Routing tab.
Step 2. Select Static Route from the table of contents and click Add
Routes.
Step 3. Select IPv4 or IPv6.
Step 4. Enter or select the Interface to which this static route applies. In
the Available Network list, enter or select the destination network. If you
are adding a default route, create an object with the address 0.0.0.0/0 and
select it there.
Step 5. Enter or select the gateway router in the Gateway or IPv6

Gateway field.
Step 6. Enter the number of hops to the destination network in the Metric
field. Valid values range from 1 to 255, and the default value is 1.
Step 7. If you want to monitor route availability, in the Route Tracking

field enter or select the name of a service level agreement (SLA) Monitor
object that defines the monitoring policy. This is only supported in IPv4 and
not in IPv6.
Step 8. Click OK.
To configure OSPF, RIP, or BGP, navigate to Devices > Device

Management and edit the FTD device and then select the routing protocol
in the Routing area.
190
Note
OSPF, RIP, and BGP routing protocol configuration is very similar to the
legacy Cisco ASA software configuration.
The access policy, IPS, AMP, URL filtering, and other configurations in
FTD are the same as the Firepower software options you learned previously
in this chapter.
Summary
In this chapter you have learned how to configure the Cisco ASA and the
Cisco ASA FirePOWER module. You have seen step-by-step examples of
how to set up the Cisco ASA FirePOWER module in Cisco ASA 5585-X
and in Cisco ASA 5500-X appliances. You have also learned how to
configure the Cisco ASA to redirect traffic to the Cisco ASA FirePOWER
module. The Cisco ASA FirePOWER module can be managed and
configured with the FMC. In addition, you have learned how to configure
the Cisco ASA FirePOWER module for the FMC. The Cisco ASA
FirePOWER module can be configured using ASDM in certain platforms
only—the Cisco ASA 5506-X, 5506H-X, 5506W-X, 5508-X, and 5516-X
appliances. In this chapter you have learned how to configure the Cisco
ASA FirePOWER module using the ASDM in the supported platforms. You
have learned how to configure access control, intrusion and file policies,
and custom rules. In addition, you have learned how to configure reusable
objects to ease configuration tasks. You have also learned how to apply
product updates and how to import and schedule rule and geolocation
database updates. Finally, you have gotten an overview of how to install the
FTD software on a Cisco ASA as well as how to configure interfaces,
security zones, and dynamic routing.
191
Chapter 4. Troubleshooting Cisco ASA with
FirePOWER Services and Firepower Threat
Defense (FTD)
This chapter provides step-by-step guidance on how to troubleshoot
common problems you may encounter when deploying the Cisco ASA with
FirePOWER Services module and the Firepower Threat Defense software.
The following topics are covered in this chapter:
Useful show commands
Access control policy details
Network configuration details
Storage usage monitoring
Running process analysis
System log (Syslog)
System task monitoring and troubleshooting
Advanced troubleshooting logs
Useful ASA debugging commands
Useful show Commands
Several show commands can be very helpful when troubleshooting

problems in the Cisco ASA with FirePOWER Services module. These
show commands also apply to Cisco Firepower Threat Defense (FTD).
If you are running the Cisco ASA with FirePOWER Services module,
connect to the module using the session command. Alternatively, you can
connect directly to the module management interface using secure shell
(SSH). Once you are in the module, to get an overview of all the show
commands that are available, log in to the command-line interface (CLI) of
192
the Cisco ASA with FirePOWER Services module and enter the show
command as demonstrated in Example 4-1.
Example 4-1 Available show Commands
ASA-1# session sfr console

Connected to module sfr. Escape character sequence is 'CTRL-^X'.RTP-SF
login: admin
Password:
Last login: Fri Jan 22 04:34:20 UTC 2016 on ttyS1
Copyright 2004-2015, Cisco and/or its affiliates. All rights reserved.
Cisco is a registered trademark of Cisco Systems, Inc.
All other trademarks are property of their respective owners.
Cisco Linux OS v5.4.1 (build 12)
Cisco ASA5508 v5.4.1.2 (build 23)
> show
Show>
access-control-config Show Current Access-Control Configuration
audit-log Show audit log
configure Change to Configuration mode
cpu Show CPU utilization
database Change to Show Database Mode
device-settings Show device settings
disk Show disk usage
disk-manager Display current status of local disk(s)
dns Show DNS configuration
end Return to the default mode
exit Exit Show Mode
expert Invoke a shell
help Display an overview of theLI syntax
history Display the current session's command line history
hostname Show hostname
hosts Show hosts
ifconfig Show currently configured interfaces
interfaces Show interface configuration
kdump Display status of kernel crash dump feature
log-ips-connection Display Logging of Connection Events setting
193
logout Logout of the current CLI session
managers Show managing Defense Centers
memory Show available memory
model Show model
netstat Show network connections
network Show configuration of management interface
network-static-routes Show static routes for management interfaces
ntp Show NTP configuration
perfstats Shoperfstats
process-tree Show processes in tree format
processes Show processes
route Show configured routes
serial-number Show serial number
show Change to Show Mode
summary Show summary
system Change to System Mode
time Show time
traffic-statistics Show traffic statistics
user Show specified users
users Show all users
version Show versions
The following sections cover some of the most useful show commands and
when to use them.
Displaying the Access Control Policy Details
In Chapter 3, “Configuring Cisco ASA with FirePOWER Services,” you

learned about the access control policies in the Cisco ASA FirePOWER
module. You may encounter problems related to the configuration of those
policies and perhaps configuration errors in Cisco’s Adaptive Security
Device Manager (ASDM). An alternative way to view the access control
policy configuration is by using the show access-control-config command,
whose output can be useful when you’re troubleshooting configuration
issues related to access control policies. Example 4-2 shows an example of
output from the show access-control-config command.
Example 4-2 show access-control-config Command Output
194
Show> show access-control-config

! The following is the policy we already had configured in the system
(myPolicy).
====================[ myPolicy ]====================
Description : my new access control policy
HTTP Block Response : Default
Interactive Block Response: Default
=================[ Default Action ]=================
! In this case, the default action is set to allow the traffic through the device.
Default Action : Allow
Default Policy : Balanced Security and Connectivity
Logging Configuration
DC : Disabled
Beginning : Disabled
End : Disabled
Rule Hits : 45894
Variable Set : Default Set
! The following two sections are the whitelist and blacklist from the global
threat
intelligence coming from Cisco.
=======[ Security Intelligence - Whitelist ]========
Name : Global Whitelist (List)
Zone : any
=======[ Security Intelligence - Blacklist ]========
Logging Configuration : Enabled
DC : Enabled
---------------------[ Block ]----------------------
Name : Malware (Feed)
Zone : any
Name : Tor_exit_node (Feed)
Zone : any
Name : Bogon (Feed)
Zone : any
Name : CnC (Feed)
Zone : any
Name : Global Blacklist (List)
Zone : any
195
Name : Phishing (Feed)
Zone : any
! The following two main categories (admin_category and root_category)
are default
built-in rules
======[ Category: admin_category (Built-in) ]=======
=====[ Category: standard_category (Built-in) ]=====
------------------[ Rule: rule1 ]-------------------
Action : Block
Source Zones : myNewZone
Destination Zones : myNewZone
Logging Configuration
DC : Disabled
Beginning : Disabled
End : Disabled
Files : Disabled
Rule Hits :0
=======[ Category: root_category (Built-in) ]=======
===============[ Advanced Settings ]================
General Settings
Maximum URL Length : 1024
Interactive Block Bypass Timeout : 600
Network Analysis and Intrusion Policies
Initial Intrusion Policy : Balanced Severity and Connectivity
Initial Variable Set : Default Set
Default Network Analysis Policy : Balanced Security and Connectivity
Files and Malware Settings
File Type Inspect Limit : 1460
Cloud Lookup Timeout :2
Minimum File Capture Size : 6144
Maximum File Capture Size : 1048576
Min Dynamic Analysis Size : 15360
Max Dynamic Analysis Size : 2097152
Malware Detection Limit : 10485760
Transport/Network Layer Preprocessor Settings
Detection Settings
Ignore VLAN Tracking Connections : False
Maximum Active Responses : No Maximum
Minimum Response Seconds : No Minimum
Session Termination Log Threshold : 1048576
196
Detection Enhancement Settings
Adaptive Profile : Disabled
Event Queue
Maximum Queued Events :5
Disable Reassembled Content Checks: False
Performance Statistics
Sample time (seconds) : 300
Minimum number of packets : 10000
Summary : False
Log Session/Protocol Distribution : False
Regular Expression Limits
Match Recursion Limit : Default
Match Limit : Default
Rule Processing Configuration
Logged Events :5
Maximum Queued Eve :8
Events Ordered By : Content Length
Latency-Based Performance Settings
Packet Handling
Threshold (microseconds) : 256
Rule Handling
Violations Before Suspending Rule : 3
Threshold (microseconds) : 512
Session Time : 10
! The following is the HTML code for the block response after a website or
web
resource is blocked.
============[ HTTP Block Response HTML ]============
HTTP/1.1 403 Forbidden
Connection: close
Content-Length: 506
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=UTF-8" />
<title>Access Denied</title>
<style type="text/css">body {margin:0;font-family:verdana,sans-serif;} h1
{margi
197
n:0;padding:12px 25px;background-color:#343434;color:#ddd} p
{margin:12px 25px;}
strong {color:#E0042D;}</style>
</head>
<body>
<h1>Access Denied<1>
<p>
<strong>You are attempting to access a forbidden site.</strong><br/><br/>
Consult your system administrator for details.
</p>
</body>
</html>
=============[ Interactive Block HTML ]=============
HTTP/1.1 200 OK
Connection: close
Content-Length: 869
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=UTF-8" />
<title>Access Denied</title>
<style type="text/css">body {margin:0;font-family:verdana,sans-serif;} h1
{margi
n:0;padding:12px 25px;background-color:#343434;color:#ddd} p
{margin:12px 25px;}
/head>g {color:#E0042D;}</style>
<body>
<h1>Access Denied</h1>
<p>
<strong>You are attempting to access a forbidden site.</strong><br/><br/>
You may continue to the site by clicking on the button below.<br/>
<em>Note:</em> You must have cookies enabled in your browser to
continue.</br><b
r/>
Consult your system administrator for details.<br/><br/>
<noscript><em>This page uses JavaScript. Your browser either doesn't
support
JavaScript or you have it turned off.<br/>
To continue to the site, please use a Javascript enabled browser.</em>
198
</noscript
>
</p>
</body>
</html>
Displaying the Network Configuration
A good way to display the network configuration in the Cisco ASA

FirePOWER module is by using the show network command, as shown in
Example 4-3.
Example 4-3 show network Command Output
Show> show network

===============[ System Information ]===============
Hostname : RTP-SF
Domains : cisco.com
DNS Servers : 208.67.222.222
Management port : 8305
IPv4 Default route
Gateway : 192.168.78.1
======================[ eth0 ]======================
State : Enabled
Channels : Management & Events
Mode :
MDI/MDIX : Auto/MDIX
MTU : 1500
MAC Address : 18:8B:9D:AD:79:C0
----------------------[ IPv4 ]----------------------
Configuration : Manual
Address : 192.168.78.2
Netmask : 255.255.255.0
Broadst : 192.168.78.255
----------------------[ IPv6 ]----------------------
Configuration : Disabled
199
===============[ Proxy Information ]================
State : Disabled
Authentication : Disabled
The show network command displays the system information, including the
module host name, configured domain name, DNS servers, management
port, and default gateway. It also provides the configured IPv4 and IPv6,
netmask, and broadcast addresses. It shows whether the management port is
enabled or disabled, as well as the interface MAC address, configured
MTU size, and other information.
To display the IPv4 and IPv6 routing table, you can use the show route
command, as shown in Example 4-4.
Example 4-4 Displaying the Routing Table
Show> show route

Kernel IP routing table
Destination Gateway Netmask Flags Metric Ref Use Iface
192.168.78.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.255.0.0 U 0 0 0 cplane
0.0.0.0 192.168.78.1 0.0.0.0 UG 0 0 0 eth0
Kernel IPv6 routing table

Destination Next Hop Flags Metric Ref Use Iface
::1/128 :: U 0 16 1 lo
fe80::200:ff:fe02:1/128 :: U 0 0 1 lo
fe80::1a8b:9dff:fead:79c0/128 :: U 0 0 1 lo
fe80::/64 :: U 256 0 0 cplane
fe80::/64 :: U 256 0 0 eth0
ff00::/8 :: U 256 0 0 cplane
ff00::/8 :: U 256 0 0 eth0
In Example 4-4 you can see that the IPv4 default gateway is set to
192.168.78.1, and the other two routes are the local networks assigned to
the management interface (eth0) and loopback address. In this example,
200
IPv6 is disabled, and you see only locally specific IPv6 information.
To display configured static routes, you can use the show network-static-
routes command.
The show ifconfig command provides similar output to the Linux ifconfig
command, as shown in Example 4-5.
Example 4-5 show ifconfig Command Output
Show> show ifconfig

cplane Link encap:Ethernet HWaddr 00:00:00:02:00:01
inet addr:127.0.2.1 Bcast:127.0.255.255 Mask:255.255.0.0
inet6 addr: fe80::200:ff:fe02:1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1480872 errors:0 dropped:0 overruns:0 frame:0
TX packets:248543 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:88914526 (84.7 Mb) TX bytes:22370811 (21.3 Mb)
eth0 Link encap:Ethernet HWaddr 18:8B:9D:AD:79:C0

inet addr:192.168.78.2 Bcast:192.168.78.255 Mask:255.255.255.0
inet6 addr: fe80::1a8b:9dff:fead:79c0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2562033 errors:0 dropped:0 overruns:0 frame:0
collisions:0 txqueuele1000
lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.255.255.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX pack:147207 errors:0 dropped:0 overruns:0 frame:0
collisions:0 txqueuelen:0
201
The output shown in Example 4-5 is very similar to the output of the
ifconfig command in most Linux operating systems. The highlighted lines
show the network configuration of eth0, which is the management interface.
A better way to display the interface configuration is to use the show
interfaces command, as demonstrated in Example 4-6.
Example 4-6 show interfaces Command Output
Show> show interfaces

! This is the outside interface of the ASA. It is associated with the "Internet"
security zone.
--------------------[ outside ]---------------------
Physical Interface : GigabitEthernet1/1
Type : ASA
Security Zone : Internet
Status : Enabled
Load Balancing Mode : N/A
! This is the inside interface of the ASA. It is associated with the
"myNewZone"
security zone.
---------------------[ inside ]---------------------
Physical Interface : GigabitEthernet1/2
Type : ASA
Security Zone : myNewZone
Status : Enabled
Load Balancing Mode : N/A
---------------------[ cplane ]---------------------
IPv4 Address : 127.0.2.1
! Ethernet 0 (eth0) is the management interface.
----------------------[ eth0 ]----------------------
Physical Interface : ethType : Management
Status : Enabled
MDI/MDIX : Auto
MTU : 1500
MAC Address : 18:8B:9D:AD:79:C0
IPv4 Address : 192.168.78.2
202
---------------------[ tunl0 ]----------------------
----------------------------------------------------
Monitoring Storage Usage
It is very important to monitor disk/storage usage by module to understand

the available resources. A good CLI command to use to monitor storage
usage and health is the show disk command. Example 4-7 shows an example
of the output generated by this command.
Example 4-7 show disk Command Output
Show> show disk

Filesystem Size Used Avail Use% Mounted on
/dev/root 3.7G 692M 2.9G 20% /
devtmpfs 1.7G 60K 1.7G 1% /dev
/dev/sda1 92M 35M 53M 40% /boot
/dev/vda7 65G 9.4G 53G 16% /var
none 1.7G 7.0M 1.7G 1% /dev/shm
The output shown in Example 4-7 includes a few columns: Filesystem

(partition), Used, Avail, Use%, and Mounted on. This is very similar to the
output of the df command in Linux.
You can run out of disk space on the Firepower Management Center, the
Firepower appliances, or the Cisco ASA FirePOWER Services module for
many different reasons. When this happens, the high disk utilization may
trigger a health alert or the system may fail a software update attempt.
Storing large volumes of old backup files on the system can take excessive
space on your disk. In order to correct this, delete the old backup files using
the web management interface under System > Tools > Backup/Restore.
Note
203
As a best practice, you can configure remote storage to store large backup
files.
The system may also run out of space if you always keep the previous
software update, upgrade, and patch files. To correct this, delete the older
update and patch files that are no longer necessary under System >
Updates.
You have to be careful not to oversubscribe the FMC—for instance, if the

module or any other managed device has stopped sending events to the FMC
or if a device is generating more events than the FMC is designed to receive
(per second). Also, if the FMC is unable to receive new IPS events, you
should check to see if there are any communication issues between the
managed device and the management center.
The root (/) partition is a fixed size and is not intended for personal storage.
If the root (/) partition is full, you should check for unnecessary files in the
/root, /home, and /tmp folders. Because these folders are not meant for
personal storage, you can delete any personal files in them by using the rm
command.
In ASDM, you can monitor the disk usage by navigating to Monitoring >
ASA FirePOWER Monitoring > Statistics, as shown in Figure 4-1.
204
Figure 4-1 ASDM FirePOWER Monitoring Statistics
Analyzing Running Processes
In ASDM, you can display and analyze all running processes much the way
you display process information in Linux: just navigate to Monitoring >
ASA FirePOWER Monitoring > Statistics, as shown in Figure 4-1. You
can obtain similar output by using the show processes command in the CLI,
as shown in Example 4-8.
Example 4-8 Displaying the Running Processes in the CLI
Show> show processes

PID USER PR NI VIRT RES SHR S %CPU
%MEM TIME+ COMMAND
4203 root 20 0 7964 2120 1024 S 4 0.1 5:02.35 pmmon.sh
4280 root 20 0 140m 7640 1260 S 4 0.2 293:38.98 diskmanager
205
4281 root 20 0 9388 952 700 S 4 0.0 269:27.89 UEChanneld
25195 sfsnort 1 -19 1042m 402m 20m S 4 11.6 15:03.18 snort
4323 root 0 -20 0 0 0 S 2 0.0 254:39.37 kvm_ivshmem_rxt
24135 admin 20 0 17376 1364 984 R 2 0.0 0:00.01 top
25194 sfsnort 1 -19 970m 387m 13m S 2 11 17:52.33 snort
1 root 20 0 4168 640 588 S 0 0.0 0:07.31 init
2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root RT 0 0 0 0 S 0 0.0 0:00.06 migration/0
4 root 20 0 0 0 0 S 0 0.0 0:.54 ksoftirqd/0
6 root 20 0 0 0 0 S 0 0.0 0:12.69 ksoftirqd/1
8 root 20 0 0 0 0 S 0.0 0:05.53 ksoftirqd/2
10 root 20 0 0 0 0 S 0 0.0 0:15.40 ksoftirqd/3
12 root 20 0 0 0 0 0 0.0 0:18.08 ksoftirqd/4
14 root 20 0 0 0 0 S 0 0.0 0:19.53 ksoftirqd/5
<output omitted for brevity>
The show process command output shown in Example 4-8 is very similar to
the output of the ps command in Linux. Understanding what processes are
running on your system and what they are doing is important. You need to
know which processes are using the most memory and which ones are using
the most CPU. You also need to know how to find a particular process. A
key process is the snort process (highlighted in Example 4-8), which is the
IPS engine of the system.
You can also use the show process-tree command to show the processes in
a tree format that indicates which processes are dependent of each other, as
shown in Example 4-9.
Example 4-9 show process-tree Command Output
Show> show process-tree
206
init(1)-+-agetty(4199)
|-agetty(4200)
|-agetty(4201)
|-crond(2661)
|-klogd(2651)
|-login(20653)---clish(20656)-+-sh(24269)-+-more(24271)
| | '-pstree(24270)
| '-{clish}(20659)
|-nscd(14774)-+-{nscd}(14777)
| |-{nscd}(14778)
| |-{nscd}(14779)
| |-{nscd}(14780)
| |-{nscd(14781)
| '-{nscd}(14782)
|-pm(4214)-+-ASAConfig.pl(4269)
| |-ActionQueueScra(4277)
| |-CloudAgent(4289)-+-{CloudAgent}(4316)
| | |-{CloudAgent}(4317)
| | |-{CloudAgent}(4318)
| | '-{CloudAgent}(4319)
| |-Pruner.pl(4276)
| |-SFDataCorrelato(4272)-+-{SFDataCorrelato}(4375)
| | |-{SFDataCorrelato}(4376)
The output shown in Example 4-9 is very similar to the output of the pstree
command in Linux. Example 4-9 shows running processes as a tree so that
you can see what processes are related to each other.
Using the System Log (Syslog)
The syslog is one of the most useful tools for troubleshooting problems you
207
might encounter in the Cisco ASA FirePOWER module. You can view the
syslog in ASDM by navigating to Monitoring > ASA FirePOWER
Monitoring > Syslog, as shown in Figure 4-2.
208
Figure 4-2 ASDM FirePOWER Syslog
You can also view real-time event information of all functions of the Cisco
ASA FirePOWER module by navigating to Monitoring > ASA
FirePOWER Monitoring > Real Time Eventing, as shown in Figure 4-3.
You can see all ASA FirePOWER events by selecting the All ASA
FirePOWER Events tab, as shown in Figure 4-3. You can also see events
related to connections passing through the module, intrusion, file inspection,
or malware file events and security intelligence events by selecting the
corresponding tabs. This screen also allows you to filter by many different
criteria.
209
Figure 4-3 ASDM FirePOWER Real Time Eventing
You can access very detailed logs by using the expert command to go into
the “expert” mode. This command brings you to a Linux prompt, as shown in
Example 4-10.
Example 4-10 Generating Detailed Logs with Expert Mode
Show> expert
admin@RTP-SF:~$ cd /
admin@RTP-SF:/$ ls
DBCheck.log boot dyn-preproc-upgrade-log lib mnt sbin upgraded
Volume cisco etc lib64 proc sys usr
Bin dev home lost+found root tmp var
While in expert mode, you can access many logs by changing directories to
210
/var/log/, as shown in Example 4-11.
Example 4-11 Accessing Detailed Logs in Expert Mode
admin@RTP-SF:~$ cd /var/log
admin@RTP-SF:/var/log$ ls
SMART_STATUS_sda_20160119050740.txt
action_queue.log
action_queue.log.1.gz
asacx_init.log
audit
btmp
cisco
configure-model.log
configure.log
configure.log.old
cron
cron.1.gz
cron.2.gz
cron.3.gz
cron.4.gz
diskmanager.log
dmesg
eth0.down.log
eth0.down.log.old
th0.up.log.old
faillog
firesight-query.log
firesight-query.log.1.gz
firstboot.S01reset_failopen_if
firstboot.S03install-math-pari.sh
211
firstboot.S04fix-httpd.sh
firstboot.S05set-mgmnt-port
firstboot.6addusers
firstboot.S07uuid-init
firstboot.S09configure_mysql
firstboot.S10database
firstboot.S10database.15vulndb-init.log
firstboot.S12install_infodb
firstboot.S15set-locale.sh
You can view each log by using the cat command. For example, to view the
scheduled tasks log, you can use the cat schedule_tasks.log command, as
shown in Example 4-12.
Instead of using the cat command, you can use the tail command, which is
basically the same as the Linux tail command. To view new log lines as they
are generated, you can use the tail -f command.
Example 4-12 Viewing the Scheduled Tasks Log
admin@RTP-SF:/var/log$ cat schedule_tasks.log

Jan 17 08:00:01 RTP-SF schedule_wrapper.pl[31159]: Starting run of task
2...
Jan 17 08:00:02 RTP-SF schedule_wrapper.pl[31159]: Task 2 should not
be run now. at
/usr/local/sf/bin/schedule_wrapper.pl line 217.
Jan 17 08:00:02 RTP-SF schedule_wrapper.pl[31159]: Ending run of task 2
().
Jan 17 08:00:02 RTP-SF schedule_wrapper.pl[31159]:
Jan 17 09:00:02 RTP-SF schedule_wrapper.pl[2879]: Starting run of task
2...
Jan 17 09:00:03 RTP-SF schedule_wrapper.pl[2879]: Validating task 2...
Jan 17 0:00:03 RTP-SF schedule_wrapper.pl[2879]: VALIDATING 1 1 on
on at /usr/local/
212
sf/lib/perl/5.10.1/SF/ScheduleTask/UpdateSRU.pm line 47.
Jan 17 09:00:03 RTP-SF schedule_wrapper.pl[2879]: Task 2 was validated
successfully.
Jan 17 09:00:03 RTP-SF schedule_wrapper.pl[2879]: Executing task ..
Jan 17 09:00:03 RTP-SF schedule_wrapper.pl[2879]: RUN UpdateSRU
task...
Jan 17 09:00:03 RTP-SF schedule_wrapper.pl[2879]: ---------------
https://support.sourcefire.com/
auto-upde/auto-dl.cgi/72:18:8B:9D:AD:79:C0/
https://support.sourcefire.com/
auto-update/auto-dl.cgi/72:18:8B:9D:AD:79:C0/GetCurrent/sf.xml--------
----------
Jan 17 09:00:03 RTP-SF schedule_wpper.pl[2879]:
Jan 17 09:00:05 RTP-SF schedule_wrapper.pl[2879]: We have
SF::System::Md5Sum
--a8ebe509a002cbe7f26a3879eb553d85 ./Sourcefire_Rule_Update-
2016-01-13-002-vrt.
sh.
Jan 17 09:00:16 RTP-SF schedule_wrapper.pl[2879]: CaughSFSystem
Exception!
Jan 17 09:00:16 RTP-SF schedule_wrapper.pl[2879]: System
(/usr/local/sf/bin/
install_rule.pl /var/sf/SRU/Sourcefire_Rule_Update-2016-01-13-002-
vrt.sh) Failed
at /usr/local/sf/lib/perl/5.10.1/SF/System/Privileged.pm line 2636.
Jan 17 09:00:16 RTP-SF schedule_wrapr.pl[2879]:
Jan 17 09:00:16 RTP-SF schedule_wrapper.pl[2879]: Request stdout!
Jan 17 09:00:16 RTP-SF schedule_wrapper.pl[2879]: The package is
/var/sf/SRU//var/
sf/SRU/Sourcefire_Rule_Update-2016-01-13-002-vrt.sh
Jan 17 09:00:16 RTP-SF schedule_wrapper.pl[2879]: Verifying archive
egrity... All
good.
213
Monitoring and Troubleshooting System Tasks
You can display complete, pending, or failed jobs (system tasks) by

navigating to Monitoring > ASA FirePOWER Monitoring > Task Status,
214
Figure 4-4 ASDM FirePOWER Task Status
This screen is useful for viewing and troubleshooting problems with

specific tasks, such as intrusion policy tasks, access policies, device update
downloads and installations, and more.
Generating Advanced Troubleshooting Logs
You can use the system generate-troubleshoot command to generate very

advanced and detailed logs that can be used for troubleshooting, as shown
in Example 4-13.
Example 4-13 The system generate-troubleshoot Command
> system generate-troubleshoot

One or more subset options required. Displaying list of options:
ALL - Run ALL Of The Following Options
215
SNT - Snort Performance and Configuration
PER - Hardware Performance and Logs
SYS - System Configuration, Policy, and Logs
DES - Detection Configuration, Policy, and Logs
NET - Interface and Network Related Data
VDB - Discovery,wareness, VDB Data, and Logs
UPG - Upgrade Data and Logs
DBO - All Database Data
LOG - All Log Data
NMP - Network Map Information
Example 4-14 demonstrates the use of the all keyword to generate logs for
all the aforementioned options.
Example 4-14 system generate-troubleshoot all Command Output
> system generate-troubleshoot all

Starting /usr/local/sf/bin/sf_troubleshoot.pl...
Please, be patient. This may take several minutes.
The troubleshoot option code specified is ALL.
Troubleshooting information successfully created at /var/common/
results-01-22-2016--184950.tar.gz
The system generate-troubleshoot all command can take several

minutes to run, as the warning message in Example 4-14 indicates. This
command generates and collects an incredible number of logs that are
extremely useful for troubleshooting many problems.
After the command finishes and stores all the logs, you can then transfer the
archive to your local machine or to an admin server using secure copy
(SCP), as shown in Example 4-15.
Example 4-15 Transferring Troubleshooting Logs to a Local

Machine/Admin Server
216
System> system file secure-copy omar.cisco.com omar dest_dir
/var/common/
results-01-22-2016--184950.tar.gz
The authenticity of host 'omar.cisco.com (172.18.104.139)' can't be
established.
ECDSA key fingerprint is
9b:f1:b2:62:04:65:be:29:94:af:09:9a:04:50:2c:0a.
Are you sure you want to continue connecting (yes/no)? yes
[email protected]'s password:*******************
copy successful.
You can also generate the troubleshooting files in ASDM by navigating to

Configuration > ASA FirePOWER Configuration > Tools >
Troubleshooting, as shown in Figure 4-5.
217
Figure 4-5 Generating Troubleshooting Files in ASDM
Sometimes you may run into trouble when trying to determine what access
control rule is blocking or allowing traffic. The restricted shell in the
Firepower software provides a utility that can help you determine the status
of each flow as the system receives packets in real time. You can invoke this
utility by using the system support firewall-engine-debug command, which
prompts you to enter the following information:
IP protocol, either TCP or UDP
Client IP
Client port
Server IP
Server port
Example 4-16 shows output from the system support firewall-engine-

debug command after you enter the required information.
218
Example 4-16 system support firewall-engine-debug Command Output
10.10.10.123-33533 and 10.20.20.21-80 6 Starting VLan first with intfs 2 -

> 1, vlan
0, svc 0, payload 0, client 0, misc 0, user 0, url
10.10.10.123-33533 and 10.20.20.21-80 6 pending rule order 1, 'Block
social media',
URL
> 1, vlan
social media',
URL
> 1, vlan
social media',
URL
> 1, vlan
0, svc 676, payload 629, client 638, misc 0, user 0, url http://cisco.com/
10.10.10.123-33533 and 10.20.20.21-80 6 match rule order 1, 'Block social
media',
action Block
The Cisco ASA drops packets if they are not compliant with the enterprise’s
configured security policy or if something is wrong in the system. These
drops could be related to the deny statements in the ACLs, illegitimate VPN
packets, a malformed TCP segment, or a packet with invalid header
information. In some cases, you will want to get the statistical information
about the packets or connections dropped by the security appliance within
its accelerated security path (ASP). You can use the show asp drop ASA
command to view the reasons that a packet was dropped, as shown in
Example 4-17.
219
Example 4-17 show asp drop Command Output
ASA# show asp drop

Frame drop:
No route to host (no-route) 618
Interface is down (interface-down) 4
Last clearing: Never
Flow drop:
Last clearing: Never
The highlighted lines in Example 4-17 shows that the frame was dropped
because there was no route to the destination. In this case, it was because
the egress interface was down.
Useful ASA Debugging Commands
A few debugging commands in the Cisco ASA are useful when you’re
troubleshooting problems with the module. The following are the most
popular ones:
debug sfr error: Used to display errors related to the Cisco ASA
FirePOWER module
debug sfr event: Used to display general events related to the Cisco ASA
FirePOWER module
debug sfr message: Used to display hardware messages between the

Cisco ASA and the module
Example 4-18 shows the output of the debug sfr event command.
Example 4-18 Debugging Module Events
ASA-1# debug sfr event
220
debug sfr event enabled at level 1
ASA-1# debug sfr event
DP SFR Event: Sending Conn Unique ID (3790083) TLV for
192.168.78.2/123 -
184.105.192.247/123
192.168.78.138/59782 -
204.141.57.101/443
192.168.78.132/27646 -
208.67.222.222/53
192.168.78.132/49148 -
173.194.206.95/443
192.168.78.132/12363 -
208.67.222.222/53
192.168.78.132/37421 -
74.125.228.243/443
192.168.78.135/777 -
8.8.8.8/0
Summary
In this chapter, you have learned about several commands and utilities that
are useful when troubleshooting problems in the Cisco ASA FirePOWER
module. These commands are also useful when you’re troubleshooting
problem in FTD software. You have learned how to perform basic
monitoring, and you have learned how to use expert-level commands to
view and analyze detailed logs in the module. You have also learned how to
generate detailed troubleshooting files in the CLI and in ASDM. You have
also learned about the available debugging commands in the ASA for
troubleshooting problems in the module.
221
Chapter 5. Introduction to and Architecture of
Cisco AMP
This chapter covers the following topics:
The architecture, components, and types of AMP
The AMP public cloud architecture
The AMP private cloud architecture
AMP private cloud air gap mode
This chapter provides an introduction to the Cisco Advanced Malware

Protection (AMP) solution, the AMP architecture, and AMP cloud types.
Introduction to Advanced Malware Protection (AMP)
In Chapter 1, “Fundamentals of Cisco Next-Generation Security,” you

learned about the different Cisco next-generation security products and
technologies. You learned that those security technologies and processes
should not only focus on detection but also should provide the capability to
mitigate the impact of an attack. Organizations must maintain visibility and
control across the extended network during the full attack continuum:
In Chapter 1 you also learned about the many different types of malicious
software (malware). The AMP solution enables you to detect and block
malware, continuously analyze for malware, and get retrospective alerts. It
has the following features:
File reputation: AMP allows you to analyze files inline and block or
apply policies.
222
File sandboxing: AMP allows you to analyze unknown files to understand
true file behavior.
File retrospection: AMP allows you to continue to analyze files for

changing threat levels.
There are major architectural benefits to the AMP solution, which leverages
a cloud infrastructure for the heavy lifting.
The architecture of AMP can be broken down into three main components:
the AMP cloud, AMP client connectors, and intelligence sources. AMP
client connectors include AMP for Networks, AMP for Endpoints, and AMP
for Content Security.
Figure 5-1 illustrates the cloud architecture, showing how AMP receives
intelligence from many sources and a variety of client connectors.
Figure 5-1 AMP Architecture
The AMP cloud contains many different analysis tools and technologies to
detect malware in files, including the Threat Grid analysis solution. Cisco’s
research teams, including the Cisco Talos security intelligence and research
group, feed information about malware into the AMP cloud. Threat
intelligence from Cisco products, services, and third-party relationships is
223
also sent to the AMP cloud. The following are some examples:
Snort, ClamAV, and Immunet AV open source communities: Users of

these open source projects contribute threat information daily.
Talos: The Cisco Talos security intelligence and research group is a team
of leading threat researchers that contributes to the threat information
ecosystem of Cisco security products. Talos team members get threat
information from a variety of sources and their own internal research
efforts. Talos maintains the official rule sets of Snort.org, ClamAV,
SenderBase.org, and SpamCop. Talos is also the primary team that
contributes to the Cisco Collective Security Intelligence (CSI) ecosystem.
You can follow Talos on Twitter @talos and subscribe to the official Talos
blog at http://blogs.cisco.com/author/talos.
Threat Grid: This deep threat analysis solution leverages many

identification techniques, including sandboxing. Threat Grid is built as a
cloud architecture and is used to do deep analysis of file samples submitted
to the AMP Threat Grid cloud. The analysis results are fed into the AMP
cloud and can be used to update file disposition (the result).
Over 100 TB of threat intelligence data daily: A variety of sources

contribute to the vast amount of data provided to Cisco through submitted
malware samples, data from the web, and email traffic monitored by Cisco
products and other third-party sources.
1.6 million global sensors: Cisco has programs designed to foster

cooperation and information sharing of threat intelligence data. Cisco
therefore has access to data from more than 1.6 million sensors worldwide.
Advanced Microsoft and industry disclosures: Cisco has cooperative

relationships with many industry-leading vendors of software products that
yield advanced information about vulnerabilities and threats. AMP
customers benefit from access to the vast amount of information gathered by
Cisco through quick release of signature updates and threat protection.
Role of the AMP Cloud
The most critical item of the Cisco AMP architecture is the AMP cloud
itself. The AMP cloud has two deployment methods—public and private—
224
and regardless of the deployment chosen, the role of the cloud is the same.
The AMP cloud houses all the detection signatures. A major benefit of
storing these signatures in the cloud is that it reduces the client connector
size and reduces the processing requirements on the client, since the bulk of
the work is handled in the cloud.
An interesting and fairly unique feature is that AMP administrators can

create custom signatures in the cloud, and then those custom signatures are
pushed to the connectors. In addition, the cross-referencing of files and
signatures is done in the AMP cloud, so the cloud can be self-updating,
without having to constantly communicate updates to the connectors.
The AMP cloud is also responsible for large-scale data processing, or big
data. The data comes to the AMP cloud from multiple sources, including
honeypots, threat feeds, open source communities, AV solutions such as
Immunet AV and ClamAV, and more. File samples are provided to the AMP
cloud, where they are processed. If the disposition of a sample file is
deemed to be malicious, it is stored in the cloud and reported to the client
connectors that see the same file.
Note
AMP customer data is never shared with any other entity.
Advanced analytic engines, including Threat Grid, are part of the AMP
cloud and are constantly correlating the incoming data. The analytical
results are used to update the AMP signatures. In addition to the advanced
analytics, machine-learning engines are employed to further refine
signatures and reevaluate detections that have already been performed. The
cloud is not just a repository of signatures; the decision making is performed
in real time, evolving constantly based on the data received.
Doing Security Differently
There is this brilliant engineer from Cisco SourceFire named Eric Howard.
Eric is one of the world’s foremost experts in AMP, and he presents
security, particularly the AMP solution, in a unique way that brings
tremendous clarity. This section of the book is designed to mirror his
presentation style.
225
Eric talks about the need to “do security differently.” He says that
companies need two security plans: Security Plan A is prevention, and
Security Plan B is retrospection.
The Prevention Framework
Prevention involves keeping malware at bay. With prevention, speed is

critical. It requires real-time, dynamic decisions to be made from real-
world data. The data must have high accuracy, with low false positives and
false negatives. Prevention could also be viewed as the “security control
mode.”
As illustrated in Figure 5-2, the AMP cloud’s prevention framework is

made up of seven core components: 1-to-1 signatures, Ethos, Spero,
indicators of compromise (IOCs), device flow correlation, advanced
analytics, and dynamic analysis.
Figure 5-2 The Protection Framework
1-to-1 Signatures
1-to-1 signatures are a traditional technology that is used all over the
security industry in various forms. With these signatures, a hash is created of
a file, and that hash is compared to a database. If a match is found, the
specific file is known, and a verdict—clean or malicious—is returned. If
the hash has not been seen before, the cloud returns a verdict of unknown.
The benefit of this method is that it can quickly identify and block malicious
files. The downside is that a simple change to a file also changes the hash,
thereby evading the signature.
AMP differentiates itself from other 1-to-1 signature solutions by storing the
signature database in the cloud instead of on the client. The database is quite
large, and many solutions cut corners by including only a subset of the
signatures in the full database. Storing the database in the cloud allows
AMP to leverage the entire database. Comparing the files to the database
226
can be quite resource intensive. AMP does the comparison in the cloud,
freeing those resources from the client connector. AMP is also able to
collect, process, and detect in near real time.
Ethos Engine
The next component of the protection framework is the Ethos engine. Ethos
is a “fuzzy fingerprinting” engine that uses static or passive heuristics. The
engine creates generic file signatures that can match polymorphic variants of
a threat. This is useful because when a threat morphs or a file is changed,
the structural properties of that file often remain the same, even though the
content has changed.
Unlike most other signature tools, Ethos uses distributed data mining to
identify suitable files. It uses in-field data for sources, which provides a
highly relevant collection from which to generate the signatures. Ethos is
completely automated and provides rapid generation of the generic
signatures that are based on in-field data instead of relying on individual
“rockstar” engineers to generate a limited number of generic signatures.
Note
At this writing, Ethos applies only to AMP for Endpoints.
Spero Engine
Spero is a machine learning–based technology that proactively identifies

threats that were previously unknown. It uses active heuristics to gather
execution attributes, and because the underlying algorithms come up with
generic models, it can identify malicious software based on its general
appearance rather than based on specific patterns or signatures.
Indicators of Compromise
If you look up “indicator of compromise” on Wikipedia

(http://en.wikipedia.org/wiki/Indicator_of_compromise), this is what you
see: “an artifact observed on a network or in an operating system that with
227
high confidence indicates a computer intrusion.”
There may be artifacts left on a system after an intrusion or a breach, and

they can be expressed in a language that describes the threat information,
known as indicators of compromise (IOCs). The sets of information
describe how and where to detect the signs of the intrusion or breach. IOCs
can be host-based and/or network-based artifacts, but the scan actions are
carried out on the host only.
IOCs are very high-confidence indicators, and they may describe numerous
specific items, including FileItem, RegistryItem, EventLogItem,
ProcessItem, and ServiceItem. You can lean the IOC language in more detail
at http://www.openioc.org.
Figure 5-3 shows an example of an IOC.
Figure 5-3 Example of an Indicator of Compromise
228
Device Flow Correlation
Device flow correlation provides a kernel-level view into network I/O. It

allows for blocking or alerting on network activity, traced back to the
initiating process itself. It enables internal and external networks to be
monitored, leverages IP reputation data, and offers URL/domain logging.
The flow points are extra telemetry data and are not file disposition
specific.
Cisco provides intelligence on many malicious destinations, including

generic command and control (CnC) servers, phishing hosts, zero-access
CnC servers, and more.
Advanced Analytics
Advanced analytics consists of a set of multifaceted engines that provide big

data context beyond a single host and beyond a single file. Advanced
analytics highlights files executed in an environment, from least common to
most. This can aid in identifying previously undetected threats that may have
only been seen by a small number of users.
Dynamic Analysis with Threat Grid
Cisco AMP Threat Grid is not a single tool. It is a full solution for dynamic
malware analysis and threat intelligence. It performs high-speed, automated
analysis with adjustable runtimes while not exposing any tags or other
indicators that malware could use to detect that it is being observed.
Threat Grid provides video playbacks, a glovebox for malware interaction

and operational troubleshooting, a process graph for visual representation
of process lineage, and a threat score with behavior indicators.
It searches and correlates all data elements of a single sample against

billions of sample artifacts collected and analyzed over years, leveraging
global and historic context. This enables an analyst to better understand the
relevancy of a questionable sample as it pertains to the analyst’s own
environment.
Threat Grid was architected from the ground up as a cloud solution with an
API designed to integrate with existing IT security solutions and to create
229
custom threat intelligence feeds. It can automatically receive submissions
from other solutions and pull the results into your environment.
Many think that Threat Grid is a sandboxing solution. It is much more than
just that, however; sandboxing is a piece of the solution, and Threat Grid’s
sandboxing functions are performed in a way that evades detection by
malware. Threat Grid uses an outside-in approach, with no presence in the
virtual machine. The sandboxing’s dynamic analysis includes an external
kernel monitor, dynamic disk analysis that illuminates any modifications to
the physical disk (such as the master boot record), monitoring user
interaction, video capture and playback, process information, artifacts, and
network traffic.
Threat Grid supports the following samples and object types:
Executable files (.EXE) and libraries (.DLL)
Java archives (.JAR)
Portable document format (.PDF)
Office documents (.RTF, .DOC, .DOCX, .XLS, .XLSX, .PPT, .PPTX)
ZIP containers (.ZIP)
Quarantine containers
URLs
HTML documents
Flash
Note
At this writing, Threat Grid is a key part of the Cisco AMP cloud, but it is
not yet available as part of the private cloud (local/onsite) offering.
The Retrospective Framework
230
Retrospection means taking a look at what has already transpired; it
involves tracking system behavior regardless of disposition, focusing on
uncovering malicious activity. Retrospection could be viewed as the
“incident response mode,” using continuous analysis to reactively act on a
file that was assigned a clean disposition once but was later found to have a
bad disposition.
The retrospective framework is designed to show the trajectory of a

malicious file, with a goal of 30 days of telemetry data, as illustrated in
Figure 5-4. Even files that are originally given a clean verdict are tracked,
and if a clean file is later found to be malicious, all connectors that have
seen the file are notified to quarantine the file retrospectively.
Figure 5-4 Trajectory Illustrated
The Cloud
As you will see throughout this book, the AMP cloud is the centralized
location for all management and reporting. Figure 5-5 shows an example of
an AMP cloud dashboard. The dashboard shows indicators of compromise
and allows you to drill into them.
From the dashboard, you can provision endpoints, download agents, run
reports, and more.
231
Figure 5-5 Example of an AMP Cloud Dashboard
Private Cloud
The AMP cloud is available in a private version. Administrators can run

their own private cloud with many of the features from the public cloud, but
not all. With the private offering, you may choose to host all components
within your own data center or perhaps in another cloud environment, like
Cisco’s InterCloud or Amazon Web Services (AWS).
The option to host the AMP cloud in your own data center is often selected
by organizations that reside outside the United States and have very strict
controls on where data may reside. In addition, some organizations, such as
government agencies, have requirements for data storage being on premises.
The private cloud product is shipped as a virtual machine that you can run in
your own VMware environment. The private cloud may be operated in two
ways: in cloud proxy mode and in air gap mode.
Note
At this writing, the private cloud is available only for AMP for Endpoints
232
and AMP for Networks. In addition, support of Threat Grid with the private
cloud is planned but not yet available.
Cloud Proxy Mode
Cloud proxy mode operates the private cloud within the confines of your
own data center or other cloud infrastructure. The AMP for Networks and
AMP for Endpoints connectors all communicate to the private cloud.
However, the private cloud maintains a connection to the public cloud for
certain communications:
File disposition checks: File disposition is still determined by the public

cloud. The file hashes are passed on to the public cloud over an SSL session
using TCP port 443 or TCP port 32137. The public cloud is known as the
upstream server, and the FQDN that you connect to is cloud-
pc.amp.sourcefire.com.
Product updates: The AMP private cloud can be configured for automatic
or manual updates, leveraging a yum repository named
packages.amp.sourcefire.com that uses an SSL session over TCP port 443.
Support: Cisco TAC is able to remotely access the device for diagnostic
purposes and customer assistance. The remote access uses SSH over TCP
port 443.
Figure 5-6 illustrates the cloud proxy mode.
233
Figure 5-6 Private Cloud Proxy Mode
Air Gap Mode
As its name indicates, air gap mode creates a private cloud instance that is
completely isolated and has no external access to the public cloud. Updates
must be completed manually, and remote support is challenging. However,
this mode provides the highest levels of confidentiality. Figure 5-7
illustrates air gap mode.
234
Figure 5-7 Private Cloud Air Gap Mode
Installing the Cisco AMP Private Cloud
The AMP private cloud is available as an Open Virtualization Archive

(.ova) format file, for import into a VMware virtual environment. At this
writing, the only supported virtual environment for the private cloud is
VMware ESX 5 or newer. Unofficially, however, the virtual appliance
works on VMware Fusion and VMware Workstation, though this is
unsupported.
Installing the private cloud in air gap mode requires more resources than the
cloud proxy mode installation. These are the minimum requirements:
Cloud proxy mode: 32 GB RAM, 8 CPUs, 238 GB minimum free disk

space
Air gap mode: 128 GB RAM, 8 CPUs, 1 TB minimum free disk space
After you deploy the OVA template, you connect to the console of the VM in
order to configure the private cloud, as shown in Figure 5-8. You need to
configure the network so the private cloud configuration can be completed
through its web interface.
235
Figure 5-8 DHCP or Static IP
DHCP is required if you will be installing in demo mode, while a static IP

address and external DNS servers are required for a production install. You
need to click No and provide valid IP stack information, as shown in
Figures 5-9 and 5-10.
Figure 5-9 DHCP or Static IP
236
Figure 5-10 Static IP Interface Configuration
You then click Yes to apply the changes to the interface, as shown in Figure
5-11. The main menu returns, with a randomized password that you use to
administer the private cloud through the web interface, as shown in Figure
5-12.
Figure 5-11 Applying Your Interface Configuration
237
Figure 5-12 AMP Private Cloud Device Management
Connect to your private cloud with a web browser using HTTPS, as shown
in Figure 5-13, and log in with a random password such as the one
displayed in Figure 5-12.
Figure 5-13 Logging into the AMP Private Cloud Web Interface
Once you have successfully logged in, you are prompted to change the one-
238
time password that the system generated, as shown in Figure 5-14, and then
you have to accept the license agreement, shown in Figure 5-15. If you step
away from the browser for an extended period of time, it times out, and you
need to log in with the newly set password of your choosing instead of the
one-time system-generated password.
Figure 5-14 Changing the Password
Figure 5-15 Accepting the License Agreement
At this point, you can restore a previously backed up private cloud or

proceed with a clean installation. To install a new private cloud, you click
Start for a clean installation, as shown in Figure 5-16.
239
Figure 5-16 Choosing a Clean Installation or to Restore from Backup
You are now prompted to choose between air gap and cloud proxy mode, as
shown in Figure 5-17. Cloud proxy mode requires an Internet connection to
send disposition queries to the public cloud and to receive content updates
as well as software updates, as described earlier in this chapter.
240
Figure 5-17 Cloud Proxy Mode or Air Gap Mode
Next, you choose the installation type. In this case, you can choose demo
mode, which requires DHCP to be used rather than a static IP address.
Demo mode also skips some of the installation requirements, so it can be
installed on a laptop or other smaller VM host.
In order to see all the installation options, you click Next under Production,
241
Figure 5-18 Choosing the Demo or Production Installation Type
For a production installation, a license file is required. Click Browse to

locate the license file, enter the passphrase to decrypt the key, and then click
Upload, as shown in Figure 5-19. The license is then installed.
242
Figure 5-19 Uploading the License File
Next, you are asked to create a console account, which you use to initially
log into the cloud, create additional accounts, and set up groups. Create your
console account and password and click Next, as shown in Figure 5-20.
243
Figure 5-20 Creating the Console Account
After creating the console account, you see a summary screen for your
storage capabilities. There are two main tabs: Automatic Configuration and
Manual Configuration. The automatic configuration adjusts partition sizes
based on the number of connectors that you configure the cloud for and the
number of days of history that you wish to retain. Figure 5-21 shows the
automatic configuration screen. With this mode, you simply state the number
of connectors to plan for and the number of days to store the data. The
connectors are the endpoints or network AMP devices that will be using this
private cloud. Warnings appear for any misconfigurations where not enough
storage is available.
244
Figure 5-21 Automatic Configuration of Storage
As shown in Figure 5-22, the manual configuration gives you more control,
and you can determine how much space to allocate for each of the
collections (archives, default, documents, executables, events, and DFC).
Again, warnings appear for any misconfigurations where not enough storage
is available.
245
Figure 5-22 Manual Configuration of Storage
Note
If you manually misconfigure the file system and the database grows too
large for the disk partition, you will need to do a full backup, reinstallation,
and restoration in order to change the partition sizes. Therefore, it is
recommended that you use the automatic option.
The next screen is the Network Configuration page. The top half of the
246
screen is fairly self-explanatory. Here you see the administrative portal
being hosted on the interface (eth0) and the IP address that you configured at
the command line. What is new here is that the second interface (eth1) needs
to be configured. The eth1 interface is known as the production interface
and is used to connect to the Internet for updates, communication with the
public cloud, and communication with all the connectors (endpoints and
network AMP systems).
Figure 5-23 shows the VMware configuration, where you can see two
network adapters. Both NICs can be on the same network segment, as shown
in Figure 5-23. They do not have to be in the same VLAN, but they can be.
Figure 5-24 shows the top half of the network configuration page, with both
eth0 and eth1 configurations displayed.
Figure 5-23 VMware Configuration Showing Two NICs
247
Figure 5-24 Top Portion of the Network Configuration Page
With the eth1 configuration complete, you come to a rather confusing part of
the setup. You need to enter two required fully qualified domain names
(FQDNs) and one optional one. What confuses people with this portion of
the setup is that the FireAMP Console FQDN, the Cloud Server FQDN, and
the Defense Center FQDN are all referring to exactly the same host—the
host that you are currently configuring. That’s right: You need to have two or
three entries in DNS that all point to the IP address configured for the eth1
interface, as shown for the DNS server displayed in Figure 5-25.
Figure 5-25 DNS A Records for the FQDNs
You need to enter these FQDNs into the corresponding fields of the
configuration screen, as shown in Figure 5-26. When you are sure that the
names exist correctly in both the DNS server and the configuration screen,
click Next (Applies Configuration) to move on.
248
Figure 5-26 Lower Portion of the Network Configuration Page
Note
The endpoints and the private cloud need the ability to resolve these DNS
names. If the endpoints cannot resolve these names, they will fail to register
to the cloud.
When the network configuration is complete, the next step is to select which
upstream cloud should be used, along with the port and security settings
related to that cloud connection, as shown in Figure 5-27.
249
Figure 5-27 Cloud Server Configuration
The upstream server selection can be either the North American cloud, the
European cloud, or a custom cloud name, as shown in Figure 5-28.
Figure 5-28 Upstream Cloud Server Selection Choices
250
Note
The custom server is not used in the majority of deployments because it is

designed for multitiered private cloud deployments, which are rare.
There are no geographical requirements for the upstream public cloud

infrastructure. The cloud server selection that you make should be based on
latency: Choose the one with the lowest latency. The next drop-down is the
protocol selection: either SSL (TCP port 443) or TCP (port 32137). Cisco
best practice is to use TCP port 32137 because the communication is
already encrypted and the SSL port adds additional overhead and uses more
bandwidth. Figure 5-29 shows the drop-down choices.
Figure 5-29 Protocol Selection
The cloud server identity section shown in Figure 5-27 and Figure 5-29 lists
this AMP cloud server’s unique identity and the certificates that represent
this cloud server’s identity for any downstream private clouds.
Click Next to move on from the cloud server configuration and set up a
recipient or recipients of administrative email notifications, as shown in
Figure 5-30. The emails may contain notices of low disk space, backup
success or failure, failed sanity checks, and more items of this nature.
251
Figure 5-30 Setting Notifications
Date and time configuration is next. Network Time Protocol (NTP) plays a
critical role in all network security solutions, ensuring time accuracy and
synchronization. It ensures that log entries will always be accurate and
provide valid, useful reports. All events are stored in UTC time, so
selecting a time zone is not necessary. The time zone will be adjusted upon
display to the console UI, so the admin is not stuck working in UTC. Figure
5-31 shows the date and time configuration screen.
252
Figure 5-31 Setting Date and Time
Note
NTP updates occur through the public interface (eth1), allowing you to
choose an NTP source on the public Internet, if that is preferred.
The next screen is for a recovery file. A recovery file is like a backup, and
it contains all the cloud configuration and the server keys shown in Figure
5-27. You should store the recovery file in a very safe location because if
you lose the recovery key, you will never be able to restore your
configuration. In addition, every one of your FireAMP connectors will need
to be reinstalled. In other words, without the original key, you have to
reinstall the private cloud infrastructure with all new keys.
To complete this step, simply download the backup file through your
browser by clicking the blue Download button (see Figure 5-32) and save
the pre-install-backup.tgz file to your local disk. Then upload it right back to
the server by clicking the Browse button on the same page. You can click
253
Next and proceed with the installation after the file is validated.
Figure 5-32 Setting Up Recovery
Finally, you see the Review and Install screen, as shown in Figure 5-33.
This is your last chance to review all the configuration options before you
install. When you are certain you have selected all the correct options, click
Start Installation, and the installation proceeds, with a status screen like
the one shown in Figure 5-34.
254
Figure 5-33 Review and Install
255
Figure 5-34 Installing the Device
As the screen warns, you should leave your browser on the page and not try
to refresh it manually. As the installation finishes, it sends an email
notification like the one shown in Figure 5-35.
256
Figure 5-35 Email Notification
When the installation is complete, the Reboot button becomes active (see
Figure 5-36). Click Reboot when the process finishes to reboot the
appliance, and the server reboots and displays the message shown in Figure
5-37.
257
Figure 5-36 Successful Installation
Figure 5-37 Rebooting
After the appliance reboots, the web interface for the administrative
interface (eth0) that you were using to configure the appliance displays key
metrics like those shown in Figure 5-38.
258
Figure 5-38 Key Metrics
Now you can connect to the web interface for the eth1 interface by
connecting to the console FQDN that you configured, as shown in Figure 5-
39. You log in using the console account you created during the setup
process.
259
Figure 5-39 Login Screen
The subscription agreement is displayed next. Scroll to the bottom and

select the check box, as shown in Figure 5-40, and click Continue.
260
Figure 5-40 Subscription Agreement
After logging in, you are presented with a setup wizard to configure your
first policies for Windows or Mac AMP connectors. The endpoint policies
are examined in more detail in Chapter 8, “Cisco AMP for Endpoints.”
Summary
In this chapter you have learned all about the role of the AMP cloud for
performing file disposition checks. You have learned about the intelligence
that feeds the AMP cloud and the AMP view of security as including a
prevention framework and a retrospection framework. You have learned
about public and private clouds and seen how to complete an installation of
a private cloud instance.
261
Chapter 6. Cisco AMP for Networks
This chapter dives into the Advanced Malware Protection (AMP) for
Networks connector. The following topics are covered in this chapter:
How AMP for Networks fits in the AMP architecture
The functions of AMP for Networks
The components and configuration of malware and file policies
The types of files and what actions are available for them
Introduction to Advanced Malware Protection (AMP) for

Networks
The network is the best place to see across an organization, uncover, and
discover. It provides unprecedented visibility to activity at a macro-
analytical level. However, to remediate malware, you need to be on the
host. This is why AMP has the following connectors: AMP for Networks,
AMP for Endpoints, and AMP for Content Security Appliances.
What Is That Manager Called, Anyway?
While the AMP connectors are installed differently and act in different
places in networks, they all speak to the AMP clouds. In addition, AMP for
Networks and AMP for Endpoints connectors share a common management
platform that has gone by a few different names since Cisco acquired
SourceFire. Thanks to the acquisition and the branding strategy from Cisco,
you might see the management center being referred to as SourceFire
Defense Center (SFDC), Cisco FireSIGHT Management Center (FMC), or
even Cisco Firepower Management Center (FMC). At this writing, the latest
and hopefully final name for the management system is Cisco Firepower
Management Center (FMC).
Form Factors
You can install AMP for Networks on any Cisco FirePOWER security
262
appliance right alongside the firewall and IPS; however, there are dedicated
AMP appliances as well. When it comes down to it, though, AMP
appliances and FirePOWER appliances are actually the same. They can all
run all the same services. Are you thoroughly confused? Stated a different
way, Cisco AMP for Networks is the AMP service that runs on an appliance
that is examining traffic flowing through a network. It can be installed in a
standalone form or as a service on a FirePOWER IPS or even a Cisco ASA
with FirePOWER Services.
At this writing, the AMP appliance lineup included the AMP7150,

AMP8050, AMP8150, AMP8350, AMP8360, AMP8370, and AMP8390.
These appliances range from 500 Mbps to 20 Gbps of throughput.
What Does AMP for Networks Do?
AMP for Networks and all the AMP connectors are designed to find
malicious files and provide retrospective analysis, illustrate trajectory, and
point out how far malicious files may have spread.
The AMP for Networks connector examines, records, tracks, and sends files
to the cloud. It creates an SHA-256 hash of the file and compares it to the
local file cache. If the hash is not in the local cache, it queries the Defense
Center (DC). The DC has its own cache of all the hashes that it has seen
before, and if it hasn’t previously seen this hash, the DC queries the cloud.
Unlike with AMP for Endpoints, when a file is new, it can be analyzed
locally and doesn’t have to be sent to the cloud for all analysis, and it also
examines and stops the file in flight, as it is traversing the appliance.
Figure 6-1 illustrates the many AMP for Networks connectors sending the
file hash to the DC, which in turn sends it to the cloud if the hash is new.
The connectors could be running on dedicated AMP appliances, as a service
on a SourceFire next-generation IPS (NGIPS), on an ASA with FirePOWER
Services, or even on the newer next-generation firewall (NGFW) known as
Firepower Threat Defense (FTD).
263
Figure 6-1 AMP Connectors Talking to the DC and Then the Cloud
It’s very important to note that only the SHA-256 hash is sent unless you
configure the policy to send files for further analysis in Threat Grid.
AMP can also provide retrospective analysis. The AMP for Networks
appliance keeps data from what occurred in the past. When a file’s
disposition is changed, AMP provides a historical analysis of what
happened, tracing an incident/infection. With the help of AMP for
Endpoints, retrospection can reach out to that host and remediate the bad
file, even though that file was permitted in the past.
This capability of retrospection is useful when a file is considered normal

and then is later reconsidered to be malicious.
AMP for Networks deals with malicious files, and it also allows an
organization to implement file control—even if malware is present.
In order for the AMP policies to be used, you must have at least one
SourceFire device with an active malware license. Figure 6-2 shows an
example of the license screen located at System > Licenses. Notice that
there are two devices listed, an ASA5515-X with FirePOWER Services
264
and a virtual SourceFire NGIPS (NGIPSv), both of which have malware
licenses.
Figure 6-2 Malware Licenses
Where Are the AMP Policies?
When you look at the Firepower Management Center (FMC), you don’t see
the AMP policies named the same way they’re named in other tools. They
are configured under Policies > Access Control > Malware & File, as
265
Figure 6-3 Malware & File Policies Page
Create a new file policy by clicking New File Policy in the upper-right
corner and providing a name in the New File Policy dialog box, as shown in
Figure 6-4. Remember to provide a detailed description that will help you
understand the purpose of the policy. Click Save to create the policy and
move into the configuration.
Figure 6-4 New File Policy Dialog
You now have a brand-new file policy with no rules, as shown in Figure 6-
5. To create your first rule in the new policy, click the Add File Rule button.
Figure 6-5 New File Policy Without Rules
The View File Rule window appears, as shown in Figure 6-6.
266
Figure 6-6 View File Rule Window
To create a file rule, you first select the application protocol to inspect for
files. The more specific your rule, the better the performance will be. As
shown in Figure 6-7, the choices are Any, HTTP, SMTP, IMAP, POP3, FTP,
and NetBIOS-ssn (SMB).
Figure 6-7 Application Protocols
You must also specify the direction of the file transfer through the network
appliance. The choices are Any, Upload, and Download, as shown in Figure
6-8.
267
Figure 6-8 Direction of Transfer
The action you choose next determines what to do with files. As shown in
Figure 6-9, the actions are Detect Files, Block Files, Malware Cloud
Lookup, and Block Malware.
Figure 6-9 File Rule Actions
File Rules
The first traditional file rule action is the Detect Files rule action. Detecting
files logs the detection of the specific files but does not interfere with the
file’s traversal through the network. Think of it as a “monitor mode” or an
audit style rule. You can store the files that meet the rule for further
evaluation.
The next traditional file rule action is the Block Files rule action, which
resets the file transfer connection. Just like the detection rule action, this
blocking action has an option to store the files.
Malware Cloud Lookup is the first of AMP rule actions, and it requires a
valid malware license. This rule action is like a monitor mode or an audit
rule for AMP, where the AMP connector obtains and logs the disposition of
the file but does not stop the transmission of the files. As with the other
268
rules, you have the ability to store the triggering files, only this time the
options are to store file types: Malware, Unknown, Clean, and/or Custom.
Block Malware is the second AMP rule action, and it naturally requires a
valid malware license. This rule action works the same way as Malware
Cloud Lookup, except it adds an option to reset the connection by sending a
TCP reset.
With both malware lookup options you have four choices:
Spero Analysis for EXEs: Spero Analysis is machine learning that

leverages heuristics to determine zero-day malware.
Dynamic Analysis: This sends the files themselves to be analyzed by

Threat Grid.
Capacity Handling: When you use dynamic analysis and the cloud is not
reachable, the files can be stored locally.
Local Malware Analysis: This examines the file using locally installed
antivirus software (at this writing, ClamAV, an open source product owned
by Cisco SourceFire).
File Disposition Types
As mentioned earlier in the chapter, there are four file dispositions:

Malware, Unknown, Clean, and Custom. One other disposition is
Unavailable. The list that follows describes these file dispositions in detail:
Malware: This disposition indicates that the AMP cloud categorized the
file as malware or local malware analysis identified malware during the
file scan, using the local antivirus software. Another possibility for this file
disposition is that the file’s threat score exceeded the malware threshold
defined in the file policy.
Clean: This disposition indicates that the AMP cloud categorized the file
as clean. It is also possible to manually add a file to the clean list, which
shows the file with the Clean disposition.
Unknown: This disposition indicates that the system queried the AMP
269
cloud, but the AMP cloud has not categorized the file.
Custom: This disposition indicates that a user added the file to the custom
detection list, possibly for data loss prevention (DLP) purposes or a static
location of the file instead of a dynamic one.
Unavailable: This disposition might mean the AMP for Networks system
could not query the AMP cloud.
Determining What Files to Match
The file rule must understand what file types to examine. To make it easier,
the system organizes file types into categories. You can use these categories
to help locate certain file types more easily. When you have the file types
you want in the middle column (aptly named File Types) of the View File
Rule dialog, click the Add button to select them for matching in the rule.
You do not have to add the individual file types; you can select the entire
category. Simply select the category on the left, click All types in selected
Categories in the middle, and then click Add. The chosen categories and
file types are maintained in the right column. Click Save to save the final
file rule.
Figure 6-10 shows the file rule with file types and categories mixed together
in the right column.
270
Figure 6-10 What File Types to Match
What About Those “Zippy” Type Files?
Zip and other archive files contain other files within them. The contents of
an archive file are examined, and the disposition of an archive file is
assigned based on the files inside it. If any of the files are determined to be
malware, the archive file is assigned the Malware disposition. If any of the
files are unknown, the archive file is marked as Unknown.
All the files within the archive must be found to be clean in order for the
archive to be assigned the Clean disposition.
Advanced File Policies
A file policy is made up of one or more file rules. In addition to the rules,
you can set some global settings for all the file rules within a file policy. As
shown in Figure 6-11, the advanced options are broken into two different
categories:
General:
First Time File Analysis: If this option is disabled, all files detected for
the first time are marked as Unknown. When this option is enabled, the files
are analyzed based on the options selected in the file rule.
Enable Custom Detection List: If this option is enabled and a file is on

the custom detection list, that file is blocked.
Enable Clean List: If this option is enabled and a file is on the clean list,
that file is allowed.
Mark files as malware based on dynamic analysis threat score: In this

drop-down list you select a threshold score. Files are considered malware
when their score is equal to or worse than the threshold value.
Archive File Inspection:
Inspect Archives: With this option disabled, AMP bypasses inspecting

archive files, even when they are selected in the file rule. If you disable the
271
inspection of archive files, AMP creates a hash of the archive file itself and
performs the lookup for that SHA, which is not very useful.
Block Encrypted Archives: Because you cannot decrypt these archives

and examine the files within the archive, you can simply choose to treat all
encrypted archives as possibly malicious and therefore block them.
Block Uninspectable Archives: This option allows you to block archive

files with contents that the system is unable to inspect for reasons other than
encryption; this could be due to file corruption or an archive within an
archive exceeding the specified maximum archive depth.
Max Archive Depth: This option determines how many levels of archive
stacking the system should decompress and examine. Think of it as a
Russian nesting doll: Files can be in a zip that is within a tar.gz file, which
is in a 7zip compressed archive.
Figure 6-11 File Policy Advanced Settings
When you’re ready to push the policies out to the AMP for Networks–
capable systems, click Deploy, as shown in Figure 6-12. As shown in
272
Figure 6-13, you now see a list of capable devices that can use this file
policy. Select the devices to receive the new policy and then click Deploy.
Figure 6-12 Deploying the Policies
Figure 6-13 Selecting the Appliances to Push Policy To
273
Summary
There are different types of AMP connectors on an endpoint and throughout
a network. AMP for Networks connectors exist on FirePOWER appliances,
ASA with FirePOWER Services, and the newer Firepower Threat Defense
(FTD) appliances.
AMP for Networks policies are configured in the Firepower Management

Center (FMC) with the Malware & File policies and then deployed to
AMP-capable appliances. The file policies determine which types of files
to examine, how to examine them, which protocols to examine for the files,
and what to do with them.
274
Chapter 7. Cisco AMP for Content Security
This chapter dives into the Advanced Malware Protection (AMP) for
Content Security connector. This chapter covers the following topics:
How AMP for Content Security fits in the AMP architecture
The components and configuration of file reputation and file analysis

services
The reporting for file reputation and file analysis services
Introduction to AMP for Content Security
The Cisco Advanced Malware Protection (AMP) architecture uses

connectors that examine files on the endpoint or in transit to and from the
network. AMP for Content Security appliances play a key role in the
perimeter security of a network, examining key traffic flows that represent
common attack vectors; they are therefore a perfect location for detecting
and blocking malware.
Figure 7-1 illustrates a network with many different AMP connectors

existing on endpoints, next-generation intrusion prevention systems
(NGIPS), AMP appliances, and Email Security Appliances (ESAs) and
Web Security Appliances (WSAs).
275
Figure 7-1 Network with AMP Connectors
Content Security Connectors
AMP connectors are implemented in different ways. The AMP for Networks
connectors that you learned about in Chapter 6, “Cisco AMP for Networks,”
are managed by the Firepower Management Center (FMC) and configured
through file policies.
AMP for Content Security appliances rely on a concept called reputation

scoring, which involves reputations of websites, email senders, and files.
Therefore, it shouldn’t come as a surprise that the capabilities on AMP for
Content Security appliances are referred to as file reputation filtering and
file analysis.
Figure 7-2 illustrates the file evaluation used by AMP for Content Security.
If the Web-Based Reputation Score (WBRS) is configured to scan, the
appliance simultaneously scans the file for malware and sends an SHA-256
of the file to the AMP cloud. In addition, if it is a Microsoft executable file,
it sends the Spero fingerprint of the PE header. Spero is a machine learning–
276
based technology that proactively identifies threats that were previously
unknown. If the file’s reputation and scan results are both determined to be
clean, the file is released and delivered to the end user.
Figure 7-2 Content AMP Flows
If the file is deemed to be malicious, either through file reputation or based

on a local scan result, the configured action is taken. If the file reputation is
unknown and it matches the criteria for file upload, the appliance uploads it
to Threat Grid in the cloud for analysis.
Configuring Cisco AMP for Content Security
Before you can configure AMP for Content Security, you must first have the
correct licensing (known as “feature keys”) on your appliances. The feature
keys enable the service on the appliance and allow you to configure the
settings for the AMP services.
Configuring the Web Security Appliance (WSA) for AMP
Two features in the WSA correspond to AMP: file reputation and file
analysis. Figure 7-3 shows the feature keys for a WSA and points out the
file reputation and file analysis feature keys.
277
Figure 7-3 AMP Feature Keys
The WSA must have access to the AMP cloud. Remember that the naming of
each Cisco product may vary (for example, the AMP cloud is sometimes
called File Reputation and Analysis Services). You configure the AMP
cloud settings under Security Services > Anti-Malware and Reputation,
278
Figure 7-4 Anti-Malware and Reputation Screen
To configure the AMP services, click Edit Global Settings. Figure 7-5
shows the resulting Edit Anti-Malware and Reputation Settings screen. To
enable AMP, simply select the check box next to Enable File Reputation
Filtering.
Clicking Submit takes you to the license agreement page, where you must
click Accept, as shown in Figure 7-6.
279
Figure 7-5 Edit Anti-Malware and Reputation Settings Screen
280
After you accept to the license agreement, the GUI redirects you back to the
main Anti-Malware and Reputation screen. You need to click Edit Global
Settings again to enable the file analysis service.
When you enable the file analysis service, the GUI asks you to agree to the
license for that service, and after you click Accept, you are redirected to the
main Anti-Malware and Reputation screen again. You must click Edit
Global Settings one more time if you want to change the file types that will
be analyzed.
There is also an area for more advanced configuration, such as changing the
cloud server to use for file reputation and setting the cloud (public or
private) to which to send the file for analysis. You also configure the
reputation threshold here; it defaults to whatever threshold is being
conveyed by the cloud. Normally, you leave these settings at their defaults.
Figure 7-7 shows the final file reputation and file analysis settings for the
WSA.
281
Figure 7-7 Final File Reputation and File Analysis Settings for the WSA
Configuring the Email Security Appliance (ESA) for AMP
Just like the WSA, the ESA has two feature keys: file reputation and file
analysis. Figure 7-8 shows the feature keys for a Cisco ESA and points out
the file reputation and file analysis feature keys, as well as the menu item
for configuring AMP.
Figure 7-8 ESA Feature Keys and Menu
282
The ESA must have the capability to reach the AMP cloud. As you saw in
Figure 7-8, you configure the AMP cloud settings under Security Services
> File Reputation and Analysis. Initially, the service is disabled, as shown
in Figure 7-9.
Figure 7-9 Security Services > File Reputation and Analysis
Configuring file reputation and analysis requires clicking the Enable button
shown in Figure 7-9. The GUI then prompts you to accept the license
agreement, as shown in Figure 7-10.
283
After you accept the license agreement, the AMP service is enabled for both
file reputation and file analysis, as shown in Figure 7-11.
Figure 7-11 AMP Services Enabled
To configure the enabled services, click Edit Global Settings, and all the
settings for AMP are displayed, as shown in Figure 7-12.
284
Figure 7-12 AMP Settings
There is also an area for more advanced configuration, such as changing the
cloud server to use for file reputation and setting the cloud (public or
private) to which to send the file for analysis. If AMP must go through an
upstream proxy (another proxy server between the ESA and the AMP
cloud), you configure this here as well. You also configure the reputation
threshold here; it defaults to whatever threshold is being conveyed by the
cloud. Normally, you would leave these settings at their defaults.
As with all other configuration changes with AMP for Content Security
appliances, you must click Commit Changes for the configuration to take
285
effect.
AMP Reports
A number of reports show AMP-related activity. Figure 7-13 shows an

example of an AMP report from ESA. Summaries are in the charts at the top,
while the files identified as threats are listed at the bottom. You can see in
the report the file hashes that were matched, the actual name of the threat
observed, and how many threats were detected, monitored, or blocked.
286
Figure 7-13 AMP Report from ESA
Figure 7-14 shows an example of an AMP report from WSA. This report is
called the File Analysis report, and it allows you to search for a specific
file hash at the top, shows the latest analysis in the middle, and shows any
pending files at the bottom.
287
Figure 7-14 AMP Report from WSA
To determine whether a file was successfully sent to the cloud, you can use
the File Analysis report or the tail CLI command. If you use tail, you can
choose option 2 for amp_logs, as shown in Figure 7-15.
288
Figure 7-15 tail amp_logs
Summary
This chapter examines how AMP for Content Security fits into the overall
AMP architecture. You have learned the feature names and how to verify
that feature keys are installed. You have also learned how to enable the file
reputation and file analysis services on the WSA and the ESA. In addition,
289
you have seen a few of the reports that are available in AMP for Content
Security.
290
Chapter 8. Cisco AMP for Endpoints
In this chapter, you will learn the following:
Introduction to Cisco AMP for Endpoints
Custom detections
Application control
AMP for Windows
AMP for Mac
AMP for Linux
AMP for Android
Installing all flavors of AMP for Endpoints
Using the AMP cloud console
This chapter provides an overview of Cisco Advanced Malware Protection

(AMP) for Endpoints. This chapter looks at where AMP for Endpoints fits
into the AMP architecture. You’ll also learn about the types of AMP for
Endpoints connectors, how to create policies for them, and how to install
them. The chapter describes how to use the AMP cloud console, and you
will even get a look at AMP detecting and remediating malware.
After Cisco acquired SourceFire, the solution previously known as

FireAMP was renamed AMP for Endpoints. Throughout the console
interface and even within the connectors, you will see a confusing mix of
terminology, and in a number of place, you will still see the term FireAMP.
The figures in this chapter even show some instances of this. Cisco is
updating its products all the time, though, so expect that the user interface
will be updated at some point.
Introduction to AMP for Endpoints
291
Throughout this book, you have been learning about the various Cisco next-
generation security products and technologies. You have learned that
security technologies and processes should not just focus on detection but
should also provide the capability to mitigate the impact of an attack.
Organizations must maintain visibility and control across the extended
network during the full attack continuum:
In Chapter 5, “Introduction to and Architecture of Cisco AMP,” you learned

all about the components that make up the AMP architecture and the AMP
cloud. You learned that the AMP solution enables malware detection,
blocking, continuous analysis, and retrospective views with the following
features:
File reputation: AMP allows you to analyze files inline and block or
apply policies.
File sandboxing: AMP allows you to analyze unknown files to understand

true file behavior.
File retrospection: AMP allows you to continue to analyze files for

changing threat levels.
Remember that the architecture of AMP can be broken down into three main
components: the AMP cloud, AMP client connectors, and intelligence
sources. This chapter focuses on the AMP for Endpoints client connector.
Figure 8-1 illustrates the cloud architecture, showing how AMP receives
intelligence from many sources and a variety of client connectors.
292
Figure 8-1 AMP Cloud Architecture
AMP for Endpoints provides more than just endpoint-level visibility into
files. It also provides cloud-based detection of malware, in which the cloud
constantly updates itself. This enables very rapid detection of known
malware because the cloud resources are used instead of endpoint
resources. This architecture has a number of benefits. With the majority of
the processing power being performed in the cloud, the endpoint software
remains very lightweight. The cloud is able to provide a historical view of
malware activity, segmented into two activity types:
File trajectory: What endpoints have seen the files
Device trajectory: Actions the files performed on given endpoints
With the data storage and processing in the cloud, the AMP solution is able
to provide powerful and detailed reporting, as well as provide very robust
management.
The AMP for Endpoints agent is also able to take action. For example, it can
block malicious network connections based on custom IP blacklists or
intelligent dynamic lists of malicious IP addresses.
What Is AMP for Endpoints?
293
AMP for Endpoints is the connector that resides on—you guessed it—
endpoints. It resides on Windows, Mac, Linux, and Android endpoints.
Unlike traditional endpoint protection software that uses a local database of
signatures to match a known bad piece of software or a bad file, AMP for
Endpoints remains lightweight, sending a hash to the cloud and allowing the
cloud to make intelligent decisions and return the verdicts Clean, Malware,
and Unknown.
Figure 8-2 illustrates the AMP for Endpoints architecture.
Figure 8-2 AMP for Endpoints Architecture
Connections to the AMP Cloud
AMP for Endpoints connectors must be able to reach the AMP cloud. That
means the agents may have to be able to go through firewalls and proxy
servers to reach the Internet.
Firewalls, Destinations, and Ports, Oh My!
If traversing a firewall and/or web proxy to reach the Internet, those

products must allow connectivity from the AMP connector to the following
servers over HTTPS (TCP 443):
Event Server: Enterprise-event.amp.sourcefire.com (for US), enterprise-

event.eu.amp.sourcefire.com (for Europe)
Management Server: Enterprise-mgmt.amp.sourcefire.com (for US),

enterprise-mgmt.eu.amp.sourcefire.com (for Europe)
294
Policy Server: policy.amp.sourcefire.com.s3.amazonaws.com (for US),
policy.eu.amp.sourcefire.com.s3.amazonaws.com (for Europe)
Error Reporting: crash.immunet.com (for US),

crash.eu.amp.sourcefire.com (for Europe)
Endpoint IOC Downloads: https://endpoint-ioc-prod-

us.s3.amazonaws.com (for US), https://endpoint-ioc-prod-
eu.s3.amazonaws.com (for Europe)
To allow a connector to communicate with Cisco cloud servers for file and
network disposition lookups, a firewall must allow the clients to connect to
the following server over TCP 443 by default or TCP 32137:
Cloud Host: cloud-ec.amp.sourcefire.com (for US), cloud-

ec.eu.amp.sourcefire.com (for Europe)
In order to upload files for analysis, clients must be able to access the
following server over TCP 80:
Submission Server: submit.amp.sourcefire.com (for US),

submit.eu.amp.sourcefire.com (for Europe)
If you have TETRA enabled on any of your AMP Connectors, you must
allow access to the following server over TCP 80 for signature updates:
Update Server: update.immunet.com (for both US and Europe)
Outbreak Control
With a solution as powerful and extensive as AMP for Endpoints, it is

difficult to determine where to start describing how to configure and use the
system; however, it makes logical sense to begin with Outbreak Control
because the objects you create within Outbreak Control are key aspects of
endpoint policies.
Outbreak Control allows you to create lists that customize AMP for
Endpoints to your organization’s needs. You can view the main lists from the
AMP cloud console by clicking the Outbreak Control menu, which offers
options in the following categories: Custom Detections, Application
Control, Network, and Endpoint IOC (indicators of compromise), as shown
295
in Figure 8-3.
Figure 8-3 Outbreak Control Menu
Custom Detections
You can think of custom detections as a blacklist. You use them to identify
files that you want to detect and quarantine. When a custom detection is
defined, not only do endpoints quarantine matching files when they see them,
but any AMP for Endpoints agents that have seen the file before the custom
detection was created can also quarantine the file through retrospection,
also known as cloud recall.
Simple custom detection allows you to add file signatures for files, while
the advanced custom detections are more like traditional antivirus
signatures.
Simple Custom Detections
Creating a simple custom detection is similar to adding new entries to a
296
blacklist. You define one or more files that you are trying to quarantine by
building a list of SHA-256 hashes. If you already have the SHA-256 hash of
a file, you can paste that hash directly into the UI, or you can upload files
directly and allow the cloud to create the SHA-256 hash for you.
To create a simple custom detection, navigate to Outbreak Control >

Custom Detections > Simple, and the list of all existing simple custom
detections appears, as shown in Figure 8-4. To add a new one, you must
type it in the Name box and click Save, as shown in Figure 8-4. The
detection is then added to the list, as shown in Figure 8-5, and automatically
edited—with the contents displayed on the right side.
Figure 8-4 Custom Detections—Simple
297
Figure 8-5 Detection Added and Contents on the Right Side
If you already have the SHA-256 hash of a file, simply paste it in, add a
note, and click Save; otherwise, you can upload a file, add a note, and click
Upload, as shown in Figure 8-5. Once the file is uploaded, the hash is
created and shown on the bottom-right side, as shown in Figure 8-6. You
must click Save, or the hash will not be stored as part of your simple
custom detection.
298
Figure 8-6 Saving a Simple Custom Detection
Advanced Custom Detections
Simple custom detections just look for the SHA-256 hash of a file.
Advanced custom detections offer many more signature types to the
detection, based on ClamAV signatures, including the following:
File body-based signatures
MD5 signatures
MD5, PE section–based signatures
An extended signature format (with wildcards, regular expressions, and

offsets)
Logical signatures
Icon signatures
To create an advanced custom detection, navigate to Outbreak Control >

Custom Detections > Advanced, and the list of all existing advanced
custom detections appears, as shown in Figure 8-7.
299
Figure 8-7 Custom Detections—Advanced
To add a new custom detection, you must type it in the Name box and click
Save, as shown in Figure 8-7, to add it to the list, as shown in Figure 8-8.
Click Edit to display the contents of the new advanced detection object on
the right side.
Figure 8-8 Adding an Advanced Custom Detection
As shown in Figure 8-8, the ClamAV signature types can be auto-detected,

or you can manually select them from the drop-down list. In Figure 8-9, the
ClamAV signature string
5d47b318b55c130ef30702026605ed6b:35411:Exploit.PDF-28520 was
pasted in with a type Auto Detect, and the Create button was clicked. You
can see there that the UI correctly converted it to hdb: Exploit.PDF-
28520.UNOFFICIAL.
300
Figure 8-9 Adding a Signature
Next, you click the Build Database From Signature Set, and a success
message is displayed, showing the successful creation of the advanced
custom detection signature set, as shown in Figure 8-10.
Figure 8-10 Successfully Built Advanced Detection
A View Changes link is visible with every custom detection, both simple
and advanced. The AMP cloud maintains an audit log for each of the
detection lists, and you can view it by clicking that link. Figure 8-11 shows
an example of the audit log.
301
Figure 8-11 Audit Log for an Advanced Custom Detection
Android Custom Detections
Android detections are defined separately from the ones used by Windows
or Mac. These detections provide granular control over Android devices in
an environment. The detections look for specific applications, and you build
them by either uploading the app’s .apk file or selecting that file from the
AMP console’s inventory list.
You can choose to use Android custom detections for two main functions:
outbreak control and application control.
When using an Android custom detection for outbreak control, you are using
the detection to stop malware that is spreading through mobile devices in
the organization. When a malicious app is detected, the user of the device is
notified and prompted to uninstall it.
302
You don’t have to use these detections just for malware, but you can also
use them to stop applications that you don’t want installed on devices in
your organization. This is what SourceFire refers to as application control.
Simply add apps to an Android custom detection list that you don’t want
installed, and APM notifies the user of the unwanted application and
prompts the user to uninstall it, just as if it were a malicious app.
To create an Android custom detection, navigate to Outbreak Control >

Custom Detections > Android to display the list of all existing Android
custom detections, if any exist. Click Create to add a new one, and give it a
name, as shown in Figure 8-12. Then click Save.
Figure 8-12 Custom Detections—Android
Once the new Android detection is created, you click Edit to add the
Android apps that you wish to detect as either malware or unwanted.
IP Blacklists and Whitelists
You can use outbreak control IP lists in conjunction with device flow
correlation (DFC) detections. DFC allows you to flag or even block
suspicious network activity. You can use policies to specify the behavior of
AMP for Endpoints when a suspicious connection is detected and also to
specify whether the connector should use addresses in the Cisco intelligence
feed, the custom IP lists you create yourself, or a combination of both.
303
You use an IP whitelist to define IPv4 addresses that should not be blocked
or flagged by DFC. AMP bypasses or ignores the intelligence feeds as they
relate to the IPv4 addresses in the whitelist.
You use IP blacklists to create DFC detections. Traffic that matches entries
in the blacklist are flagged or blocked, as the DFC rule dictates.
To create an IP list, navigate to Outbreak Control > Network > IP Blacklists

& Whitelists, as shown in Figure 8-13.
Figure 8-13 Network—IP Blacklists & Whitelists
Here you click Create IP List to start a new IP list, and you’re brought to
the New IP List configuration screen, where you can either create an IP list
by typing the IPv4 addresses in classless interdomain routing (CIDR)
notation or by uploading a file that contains a list of IPs. You can also
specify port numbers to block or allow. After the list is created, you can edit
it only by downloading the resulting file and uploading it back to the AMP
console. Figure 8-14 shows the New IP List screen, with a mixture of
entries entered as text.
304
Figure 8-14 New IP List Screen
You name the list, choose whether it is a whitelist or a blacklist, and enter a
series of IPv4 addresses, one line at a time. Each line must contain a single
IP or CIDR. Acceptable formats include the following:
10.1.100.0/24: A standard network range designated by network-/mask-

length CIDR notation
192.168.26.26: A single IPv4 address
10.1.250.254:443: A single IPv4 address with a port specified (UDP and

TCP)
10.250.1.1/16:8443: A CIDR-notated network range with a port specified

(UDP and TCP)
You click Create IP List to create the text file in the cloud console, and
your new IP list is shown on the screen. If you click Edit, you can change
the name of the IP list. To update the contents of the list, you must click
Download and then delete the list. Then you create a new list with the same
305
name and upload the modified file. An IP list can contain up to 100,000
lines or be a maximum of 2 MB in size.
As for custom detections, the AMP console maintains an audit trail for IP
lists that you can view by clicking View Changes.
Application Control
Like files, applications can be detected, blocked, and whitelisted. As with

the other files, AMP does not look for the name of the application but the
SHA-256 hash.
To create a new application control list for blocking an application,

navigate to Outbreak Control > Application Control > Blocking. One
thing you must credit the SourceFire AMP team with is that it sure
understands the concept of consistency in GUIs. This GUI works just like so
many other areas of the interface. If any existing blocking lists exist, they are
displayed here, as shown in Figure 8-15. As you would expect, to create a
new list, you click Create. You must name the list and click Save before
you can add any applications to the blocking list.
Figure 8-15 Outbreak Control > Application Control > Blocking
Once the list has been created and saved, click Edit to add any applications.
If you already have the SHA-256 hash, add it. Otherwise, you can upload
one application at a time and have the AMP cloud console calculate the hash
for you, as long as the file is not larger than the 20MB limit. You can also
306
upload an existing list. Figure 8-16 shows a blocking list with an existing
application hash shown at the bottom of the right-hand column, while
another file is being uploaded for hash calculation.
Figure 8-16 Adding Application Hashes to the Blocking List
Application whitelists work the same way. Navigate to Outbreak Control

> Application Control > Whitelisting to see a list of any existing
whitelists. Click Create to add a new one, provide it a name, and click
Save, as shown in Figure 8-17.
307
Figure 8-17 Outbreak Control > Application Control > Whitelisting
Once the list has been created and saved, click Edit to add any applications.
If you already have the SHA-256 hash, add it. Otherwise, you can upload
one application at a time and have the AMP cloud console calculate the hash
for you, as long as the file is not larger than the 20 MB limit. You can also
upload an existing list. Figure 8-18 shows a whitelist with an existing
application in the list (SafeGuardPDFViewer.exe).
Figure 8-18 Adding Application Hashes to a Whitelist
Don’t forget to click Save after adding the hash to the list.
Exclusion Sets
There is one more object that you should try to create before you build your
policies, and that is an exclusion set. An exclusion set is a list of
directories, file extensions, or even threat names that you do not want the
AMP agent to scan and definitely not to convict as malware.
You can use an exclusion set to resolve conflicts with other security
products or mitigate performance issues by excluding directories that
contain large files that are frequently written to, like databases. If you are
308
running an antivirus product on computers with the AMP for Endpoints
connector, you should exclude the location where that product is installed.
It’s important to remember that any files stored in a location that has been
added to an exclusion set will not be subjected to application blocking,
simple custom detections, or advanced custom detections.
These are the available exclusion types:
Threat: This type excludes specific detections by threat name.
Extension: This type excludes files with a specific extension.
Wildcard: This type excludes files or paths using wildcards for filenames,
extensions, or paths.
Path: This type excludes files in a given path.
For Windows, path exclusions may use constant special ID lists (CSIDL),
which are Microsoft given names for common file paths. For more on
CSIDL, see https://msdn.microsoft.com/en-
us/library/windows/desktop/bb762494%28v=vs.85%29.aspx.
To create a new exclusion set, navigate to Management > Exclusions. Here

you see a list of any existing exclusions and can create new ones. Click
Create Exclusion Set, provide a name, and click Save. The contents of the
exclusion set are automatically listed on the right side.
As shown in Figure 8-19, new exclusion sets are created with some default
exclusions. Many of these exclusions are specific to the default installation
paths of antivirus products and designed to cover a large variety of
installations. Figure 8-19 shows an example of a Windows exclusion set.
Figure 8-20 shows a Mac exclusion set, and Figure 8-21 shows a Linux
exclusion set.
309
Figure 8-19 Creating a Windows Exclusion Set
Figure 8-20 Creating a Mac Exclusion Set
310
Figure 8-21 Creating a Linux Exclusion Set
The Many Faces of AMP for Endpoints
AMP for Endpoints is available for multiple platforms: Windows, Android,

Mac, and Linux. You can see the available connectors from the cloud
console by navigating to Management > Download Connector. Here you
see the types of endpoints, as shown in Figure 8-22.
Figure 8-22 AMP Connector Types
311
The following sections go through the options for each of the operating
systems shown in Figure 8-22.
AMP for Windows
The Windows AMP connector supports many different flavors of Windows

in both 32-bit and 64-bit variants of those Windows platforms. The
following are the minimum system requirements for the Windows AMP
agents, based on the operating system version:
Microsoft Windows XP with Service Pack 3 or later:
500 MHz or faster processor
256 MB RAM
150 MB available hard disk space for cloud-only mode
1 GB available hard disk space for TETRA
Microsoft Windows Vista with Service Pack 2 or later:
1 GHz or faster processor
512 MB RAM
Microsoft Windows 7:
1 GB RAM
Microsoft Windows 8 and 8.1 (requires AMP Connector 3.1.4 or

later):
312
512 MB RAM
Microsoft Windows 10 (requires AMP Connector 4.3.0 or later):
1 GB RAM (32-bit) or 2 GB RAM (64-bit)
Microsoft Windows Server 2003:
512 MB RAM
Microsoft Windows Server 2008:
2 GB RAM
Microsoft Windows Server 2012 (requires AMP Connector 3.1.9 or

later):
313
2 GB RAM
Windows Policies
There are many policy options for Windows. From the AMP cloud console,
navigate to Management > Policies > Windows, where you can see
existing AMP policies for Windows as well as create new ones (see Figure
8-23).
Figure 8-23 AMP Windows Policies
Click Create Policy and then select FireAMP Windows from the drop-
down as shown in Figure 8-24, and click Create Policy.
314
Figure 8-24 Selecting the Connector OS
In the New Policy Window, select the custom detections, app blocking,
whitelists, and exclusions created earlier, as shown in Figure 8-25. When
they are all selected, click Create Policy to save the policy.
Figure 8-25 Creating a Windows Policy
315
Click Edit for the newly created Windows policy and scroll to the bottom.
This is where a lot of the AMP agent configuration and customization takes
place. There are three tabs for AMP connector configurations: General,
File, and Network.
General Tab
The General tab for a Windows policy has the basic settings for the AMP
for Endpoints connector, such as proxy settings and update schedules. There
are five component areas within the General tab: Administrative Features,
Connector Identity Persistence, Client User Interface, Proxy Settings, and
Product Updates. Each of these areas is explained in the sections that
follow. One very nice UI feature here is that a blue informational icon
appears whenever a default setting is changed, as shown in Figure 8-26.
316
Figure 8-26 The Windows Policy General Tab
Administrative Features
As you can see in Figure 8-26, there are nine configurable settings in the
Administrative Features section of the General tab:
Send User Name in Events: This relates to the username that has
launched the process. This setting is useful for tracking down who was on a
system that may be seeing malware.
Send Filename and Path Info: This setting enables the AMP agent to send
317
the filename and path information to the AMP cloud so that they are visible
in the Events tab, device trajectory, and file trajectory. Unchecking this
option stops this information from being sent.
Heartbeat Interval: This option sets how often the AMP agent should
call home to the AMP cloud. During the call home connection, the agent
checks whether there are any policy updates, any updates or scans to
perform, or any files to restore via cloud recall or by the administrator.
Confirm Cloud Recall: Cloud recall (also known as retrospection) can

find every connector that has seen a specific file and attempt to quarantine it
when the connector calls home on its heartbeat interval. This check box
adds a required action for a system admin to confirm before recalling any
files.
Connector Log Level and Tray Log Level: This option allows you to
change the default log level to debug, when directed by Cisco Technical
Assistance Center (TAC).
Connector Protection: Selecting this check box requires a password for

stopping the AMP service or the uninstalling the AMP agent.
Connector Protection Password: This option sets the password for the
connection protection.
Automated Crash Dump Uploads: When this option is enabled, the

connector automatically sends crash dumps to Cisco for analysis in the
event of connector crashes.
Connector Identity Persistence
Connector Identity Persistence is an odd section to show in the interface. It

is actually not available unless enabled by TAC. Identity persistence is used
in virtual environments when systems are cloned or reimaged. This setting
maintains a consistent event log by binding a connector to a MAC address
or hostname so that a new event log is not created every time a new virtual
session is started or a computer is reimaged. You can choose to apply this
setting with granularity across different policies or across your entire
organization. There are five configuration options for identity persistence,
as shown in Figure 8-27:
318
Figure 8-27 Connector Identity Persistence
None: Connector logs are not synchronized with new connector installs
under any circumstance. This is the default setting unless changed by
support.
By MAC Address across Business: New connectors look for the most
recent connector that has the same MAC address to synchronize with across
all policies in the business that have Identity Synchronization set to a value
other than None.
By MAC Address across Policy: New connectors look for the most
recent connector that has the same MAC address to synchronize with within
the same policy.
By Hostname across Business: New connectors look for the most recent
connector that has the same hostname to synchronize with across all policies
in the business that have Identity Synchronization set to a value other than
None.
By Host name across Policy: New connectors look for the most recent
connector that has the same hostname to synchronize with within the same
policy.
Client User Interface
319
The Client User Interface section allows you to configure what the end user
sees on the Windows system. Many organizations prefer to show the agent
icon in the system tray, so it is obvious that the agent is running, but they
often choose to hide all notifications so that users are not bothered by the
connector. There are six different options, as shown in Figure 8-28:
Start Client User Interface: Simply put, this option hides the user
interface or shows it. The agent is running either way. This setting offers you
the option of keeping it out of the system tray. When you change this option,
it takes effect at the next agent restart.
Cloud Notifications: This option controls whether you see those fun
balloon pop-ups from the agent icon in the Windows system tray. When this
option is selected, a pop-up appears when the agent is successfully
connected to the cloud, and it displays the number of users and detections
registered to the cloud.
Verbose Notifications: When this option is enabled, the end user is

completely harassed by a series of text boxes that pop up from the Windows
system tray icon, telling about nearly every file that traverses the AMP
connector. Leave this option unselected unless you are in the process of
active troubleshooting or you just want to punish your end users.
320
Figure 8-28 Client User Interface
Hide Cataloging Notifications: This option relates to endpoint IOC scans

and hides the user notification about cataloging. Note that when you select
this option, you hide a disk-intensive process of cataloging artifacts from the
system to be used in comparisons with IOCs.
Hide File Notifications: Selecting this option keeps malicious file

notifications from being displayed when a file is convicted or quarantined
by the AMP agent.
Hide Network Notifications: Selecting this option causes messages to not

display when a malicious network connection is detected or blocked by
AMP.
It is highly recommended that you keep any interactivity with the end user to
an absolute minimum. End users often get frustrated and annoyed when
burdened by notifications that they don’t understand or don’t care to
understand.
321
Proxy Settings
In today’s world of mobile workstations, configuring a hard-coded proxy

server may not always be the best-practices configuration. However, with
the wonderful cloud-based technologies available, such as the Cisco Cloud
Web Security solution (blatant plug), you may wish to configure the AMP
agent to always use that cloud proxy solution. Proxy servers and some of the
complications they bring are covered in more detail later in this chapter, but
in the meantime, let’s take a look at the Proxy Settings section in the General
tab, as displayed in Figure 8-29.
Figure 8-29 Proxy Settings
322
By populating the Proxy Settings sections of the General tab, you can
configure a hard-coded proxy server for the agents that receive this policy.
As you can see in Figure 8-29, basic and NT LAN Manager (NTLM)
authentications are both supported, as are straight HTTP proxy and Secure
Sockets (SOCKS) proxy. If you use NTLM, be sure to use the
DOMAIN\USER notation for the account.
Product Updates
The policy that is applied to the AMP connector determines whether and
when to update to a newer version. You select the version from the Product
Version drop-down, choose a time window for the updates to occur, and tell
the agent how often to check for updates. Figure 8-30 shows the Product
Updates settings.
Figure 8-30 Product Updates
323
A reboot is required for the running AMP agent to reflect an upgrade. The
Product Updates section lets you specify whether to not reboot the system,
to ask the user if it’s okay to proceed with a reboot, or to simply reboot the
system, as shown in Figure 8-30.
File Tab
You use the File tab to configure the settings and behavior of file scanning in
the AMP for Endpoints agent. For example, you can specify which engines
to use, set up scheduled scans, and specify cache settings. There are six
component areas of the File tab: Modes, Cache Settings, Engines, Ethos,
Cloud Policy, and Scheduled Scans. Figure 8-31 shows the File tab with the
Modes component area expanded.
Figure 8-31 File Tab
324
Modes
The Modes section of the File tab allows you to specify how the AMP
connector should behave during file moves or copies as well as how it
should behave when a file is executed. These are the available options in
the Modes section:
Monitor File Copies and Moves: This option is either selected or not. It
determines whether AMP should care about files when they are moved or
copied within or off the system.
File Conviction Mode: This option is set to either Audit or Quarantine. In

other words, is this a monitor-only deployment, or should the AMP agent
take action?
Monitor Process Execution: This option is set to either on or off. This

setting determines whether AMP should care about executable files when
they are run.
On Execute Mode: This option is set to either Passive or Active. In other

words, should the file lookup happen before the executable is allowed to
run, or should they occur in parallel? When the endpoint has another
antivirus product installed, it is best to leave this set to Passive to avoid
performance issues.
Maximum Scan File Size: Any file larger than this setting will not be
scanned by AMP.
Maximum Archive Scan File Size: Any archive file (ZIP, TAR, etc.)
larger than this setting will not be scanned by AMP.
Cache Settings
As you know, the AMP connector focuses on the disposition that the AMP
cloud assigns to the SHA-256 hash of a file. The hash and the disposition
are stored in a local cache for better performance and to reduce redundant
lookups of the same hash value. The settings in the Cache Settings section of
the File tab determine how long the hashes should remain in the cache. As
Figure 8-32 shows, there are four different cache settings, all of which are
configured as the number of seconds before checking those file hashes
325
again:
Malicious Cache TTL: This setting specifies how long to hold on to the
disposition of a file hash when it has been deemed malicious. The default is
1 hour.
Clean Cache TTL: This setting specifies how long to hold on to the
information when a file has been assigned a clean disposition. The default is
7 days.
Unknown Cache TTL: This setting specifies how long to store the
disposition of files that receive an Unknown disposition. The default is 1
hour.
Application Blocking TTL: This setting specifies how long an outbreak

control blocking list is cached. The default is 1 hour.
Figure 8-32 Cache Settings Section
Engines
326
As shown in Figure 8-33, the Engines section is used to configure the use of
one or all of the three engines:
Offline Engine (TETRA): This setting is configured to be disabled

(default) or TETRA, which is a full client-side antivirus solution. Do not
enable the use of TETRA if there is an existing antivirus product in place.
The default AMP setting is to leave TETRA disabled, as it changes the
nature of the AMP connector from being a very lightweight agent to being a
“thicker” software client that consumes more disk space for signature
storage and more bandwidth for signature updates. When you enable
TETRA, another configuration subsection is displayed, allowing you to
choose what file scanning options you wish to enable, as shown in Figure 8-
34.
Figure 8-33 Engines Settings Section
327
Figure 8-34 Optional TETRA Settings
Spero: Spero is a machine learning–based technology that proactively

identifies threats that were previously unknown. It uses active heuristics to
gather execution attributes, and because the underlying algorithms come up
with generic models, they can identify malicious software based on its
general appearance rather than basing identity on specific patterns or
signatures.
Ethos: Ethos is a “fuzzy fingerprinting” engine that uses static or passive

heuristics. Disabling Ethos in this section hides the Ethos menu from the
File tab altogether.
Ethos
As just mentioned, Ethos is a “fuzzy fingerprinting” engine that uses static or

passive heuristics. Think of it as Cisco’s file-grouping engine. It groups
families of files together, and when variants of a malware are detected, it
marks the Ethos hash as malicious and instantly detects entire families of
malware.
328
Ethos can be a bit resource intensive, and therefore it is enabled only for
file move and copy by default, as shown in Figure 8-35. When scanning on
copy or move, AMP allows the copy or move action to finish and then
queues another thread to calculate the Ethos for a file. That same passive
performance luxury is not available for the On Execute or On Scan settings.
Figure 8-35 Ethos Settings Section
Cloud Policy
The Cloud Policy settings refer to the Ethos and Spero engines. Because
both Ethos and Spero are classified as generic engines, you can tune how
false-positive-prone an Ethos or Spero hash is. The Cloud Policy section
provides up to three configurable thresholds, as shown in Figure 8-36.
329
Figure 8-36 Cloud Policy Settings Section
Detection Threshold per Ethos Hash: When this option is selected, a

single Ethos hash can convict a single SHA of unknown disposition a
maximum number of times. The default is 10, meaning that Ethos will not
convict any SHA-256 seen 10 times in 24 hours by the entire community. If
you encounter a situation where the detection threshold has been reached but
feel that the detection is not a false positive and want to keep convicting the
particular SHA, you should add it to an advanced custom detection list.
Detection Threshold per Spero Hash: This is exactly like the Detection
Threshold per Ethos Hash option, except it refers to Spero.
Step-Up Enabled: When this option is selected, additional Spero

groupings can be turned on if the network is considered “massively
infected.” These Spero groupings, or trees, are more false positive prone
but do a better job of detecting malware. The definition of “massively
infected” is based on the Step-Up threshold setting.
Step-Up Threshold: This option’s setting determines whether a connector
330
is “massively infected.” The default is 5, meaning that if 5 SHA one-to-one
detections are found in 30 seconds, the system is considered “massively
infected,” and additional Spero trees are enabled for the next 30 seconds.
Scheduled Scans
Scheduled scans are typically deemed unnecessary with AMP for

Endpoints. This is because files are being scanned as they are moved,
copied, or executed. So to keep the processing low and the performance
higher, no scans are scheduled by default. This does not, however, preclude
you from configuring some scheduled scans per policy, as shown in Figure
8-37.
Figure 8-37 Scheduled Scans Settings Section
Multiple scans can be configured to occur daily, weekly, and/or monthly.

Scans can be flash, full, or custom scans, and they can be configured to
occur at specific times. A flash scan examines the processes running in
memory, along with the files and registry settings associated with those
running processes. A full scan examines the processes running in memory,
331
their associated registry settings, and all the files on the entire disk. A
custom scan is configured to look at files in a specific path. Figure 8-38
shows an example of the configuration window that pops up when you add a
scheduled scan.
Figure 8-38 Adding a Scheduled Scan
Network Tab
You use the Network tab to configure device flow correlation (DFC) and, in
fact, DFC is the only configuration section in the Network tab. As described
earlier in this chapter, DFC allows you to flag or even block suspicious
network activity.
As you can see in Figure 8-39, you can enable or disable DFC from the
Network tab. In addition, you specify here whether the detection action
should be Audit or Blocking. In other words, you specify whether this
policy should dictate a monitor-only mode or actually take action on the file.
If you select Blocking, you can choose to terminate the parent process of the
network connection and quarantine the malicious file. Finally, you can set
Data Source to SourceFire, Custom, or both.
332
Figure 8-39 Network Tab
Known Incompatible Software
At this writing, AMP for Windows has interaction incompatibility with the
following security software:
Check Point’s ZoneAlarm
Carbon Black
Res Software’s AppGuard
AMP for Mac

Unlike AMP for Windows, AMP for Mac is supported only on 64-bit
versions of the popular Mac OS. The following are the minimum system
requirements for the Mac AMP agents, based on the operating system
version:
Apple OS X 10.7:
2 GB RAM
65 MB available hard disk space
Apple OS X 10.8:
333
2 GB RAM
Apple OS X 10.9:
2 GB RAM
Apple OS X 10.10 (requires AMP Mac Connector 1.0.6 or later):
2 GB RAM
Apple OS X 10.11 (requires AMP Mac Connector 1.0.7 or later):
2 GB RAM
MAC Policies
There are many policy options for Macs. From the AMP cloud console,
navigate to Management > Policies > Mac to see existing AMP policies
for Mac and create new ones, as shown in Figure 8-40.
334
Figure 8-40 Creating a Mac Policy
Click Create Policy and then select FireAMP Mac from the drop-down, as
shown in Figure 8-40, and click Create Policy.
In the New Policy Window that appears, provide a name and select the
custom detections, app blocking, whitelists, and exclusions created earlier,
as shown in Figure 8-41. When they are all selected, click Create Policy to
save the policy.
335
Figure 8-41 Creating a Mac Policy
Click Edit for the newly created Mac policy and scroll to the bottom. This
is where a lot of the AMP agent configuration and customization takes place.
Just as with a Windows policy, the AMP connector configurations are
presented in three tabs for Mac: General, File, and Network.
General Tab
The General tab for a Mac policy provides the basic options for the AMP
for Endpoints connector, such as proxy settings and update schedules. As
shown in Figure 8-42, there are four component areas in the General tab:
Administrative Features, Client User Interface, Proxy Settings, and Product
336
Updates. These areas are explained in the following sections.
Figure 8-42 Mac Policy General Tab
As you can see in Figure 8-42, there are five configurable settings in the
Administrative Features section of the General tab:
Send Filename and Path Info: This option enables the AMP agent to send
the filename and path information to the AMP cloud so that they are visible
in the Events tab, device trajectory, and file trajectory. Unchecking this
option stops this information from being sent.
Heartbeat Interval: This option sets how often the AMP agent should
call home to the AMP cloud. During the call home connection, the agent
checks whether there are any policy updates, any updates or scans to
perform, or any files to restore via cloud recall or by the administrator.
Confirm Cloud Recall: Cloud recall (also known as retrospection) can

find every connector that has seen a specific file and attempt to quarantine it
337
when the connector calls home on its heartbeat interval. This check box
adds a required action for a system admin to confirm before recalling any
files.
Connector Log Level: This option allows you to change the default log
level to debug, when directed by Cisco TAC.
Tray Log Level: This option allows you to change the default log level to
debug, when directed by Cisco TAC.
Note
This section has no options for sending the username, connector protection
options, or crash dumps. Those are Windows-specific options.
The Client User Interface section of the General tab allows you to configure
what the end user sees on a Mac system. Many organizations prefer to show
the agent icon in the menu bar, so it is obvious that the agent is running, but
they often choose to hide all notifications so that the users are not bothered
by the agent. There are four different options, as shown in Figure 8-43:
Start Client User Interface: Simply put, this option hides the user
interface or shows it. The agent is running either way. This setting offers you
the option of keeping it out of the menu bar. When you change this option, it
takes effect at the next connector restart.
Cloud Notifications: This option controls whether you see those fun
notification pop-outs that come from the upper-left side of the screen on a
Mac (the Notification Center). When this option is selected, a pop-out
appears when the agent is successfully connected to the cloud, and it
displays the number of users and detections registered to the cloud. Your
end users will normally not thank you for these messages, which don’t make
any sense to them.
Hide File Notifications: Selecting this option hides malicious file

notifications from being displayed when a file is convicted or quarantined
by the AMP agent.
338
Hide Network Notifications: Selecting this option hides messages when
a malicious network connection is detected or blocked by AMP.
Figure 8-43 Client User Interface Section
It is highly recommended that you keep any interactivity with the end user to
an absolute minimum. End users often get frustrated and annoyed when
burdened by notifications that they don’t understand or don’t care to
understand.
Proxy Settings
The options in the Proxy Settings section for Mac are exactly the same as for
the Windows connector. To do our part to save the planet and use less paper,
please see the “Proxy Settings” section for Windows, earlier in this chapter.
Product Updates
The options in the Product Updates section for Mac are exactly the same as
for the Windows connector. Please see the “Product Updates” section for
Windows, earlier in this chapter.
339
File Tab
You use the File tab to configure the settings and behavior of file scanning in
the AMP for Endpoints agent, such as which engines to use, setting up
scheduled scans, and cache settings. There are five component areas of the
file tab: Modes, Offline Engine—ClamAV, Cache Settings, Engines, and
Scheduled Scans.
Modes
The options in the Modes section for Mac are exactly the same as for the
Windows connector. Please see the “Modes” section for Windows, earlier
in this chapter.
Offline Engine—ClamAV
This section is available only when ClamAV has been selected for the
Offline Engine option in the Engines portion of the File tab.
The Windows connector uses TETRA for offline scanning. The Mac
connector uses ClamAV, which is an open source full antivirus product,
owned by Cisco SourceFire. Just like TETRA, ClamAV is signature based
and takes up more disk space and processor power on the Macs.
As shown in Figure 8-44, the only configurable option for ClamAV is

Content Update Interval. By default, it checks for new or updated AV
signatures to be downloaded every 24 hours. Just as on Windows,
compatibility with other antivirus software solutions can be an issue, so
never enable Offline Engine—ClamAV if another antivirus product is
installed on the computer.
340
Figure 8-44 Offline Engine—ClamAV
Cache Settings
The options in the Cache Settings section for Mac are exactly the same as
for the Windows connector. Please see the “Cache Settings” section for
Engines
As stated in the “Offline Engine—ClamAV” section, the Engines section of

the File tab is where you enable or disable ClamAV in the Mac connector
policy.
Scheduled Scans
The options in the Scheduled Scans section for Mac are exactly the same as
for the Windows connector. Please see the “Scheduled Scans” section for
Network Tab
Just as with the AMP for Windows connector, you use the Network tab to
configure DFC. As described earlier in this chapter, DFC allows you to flag
341
or even block suspicious network activity.
As you can see in Figure 8-45, the options here are even fewer for Mac than
they are for Windows. DFC can be enabled or disabled, and Detection
Action may be set to Audit or Blocking.
Figure 8-45 Network Tab
AMP for Linux
AMP for Linux gets a bit interesting. First of all, there are more flavors of
Linux than you can count, and Cisco certainly cannot be expected to support
and test every one. At this writing, only the CentOS and Red Hat Linux
variants are supported, and only the 64-bit versions of those Linux flavors
are supported. The system requirements are as follows:
CentOS 6.4/6.5/6.6:
1 GB RAM
Red Hat Enterprise Linux 6.5/6.6:
1 GB RAM
342
Note
AMP for Linux may not install properly on custom kernels.
Linux Policies
Just as with the Windows and Mac operating systems, there are many policy
options for Linux. From the AMP cloud console, navigate to Management
> Policies > Linux, where you can see existing AMP policies for Linux and
create new ones.
Click Create Policy and then select FireAMP Linux from the drop-down
and click Create Policy.
In the New Policy window that appears, provide a name and select the
custom detections, app blocking, whitelists, and exclusions created earlier,
as shown in Figure 8-46. When they are all selected, click Create Policy to
save the policy.
343
Figure 8-46 Creating a Linux Policy
Click Edit for the newly created Linux policy and scroll to the bottom to
find the three tabs General, File, and Network.
General Tab
Just as for Windows and Mac, the General tab for a Linux policy has the
basic settings for the AMP for Endpoints connector, such as proxy settings
and update schedules.
There are only four component areas in the General tab: Administrative
Features, Client User Interface, Proxy Settings, and Product Updates. Only
344
the items that are different from the Windows and Mac policy options are
discussed here. You can look to earlier sections for descriptions of any
other options.
The only difference in configuration of administrative features on Linux as

compared to Mac is the lack of a system tray log for which to set the level.
Only the connector log exists, and therefore only connector log settings can
be changed from Default to Debug.
The Client User Interface section provides two options: Hide File
Notifications and Hide Network Notifications. As always, silence seems to
be golden for the AMP connector, so hiding notifications may be wise for
your environment.
File Tab
The File tab for Linux is exactly the same as it is for the Mac connector.
ClamAV is the antivirus product for Linux that is built into the AMP
connector, and it can be enabled and configured for periodic updates, just as
the Mac connector can.
Network Tab
Just as with the Mac and Windows connectors, the Network tab for Linux is
used to enable or disable DFC. However, Linux does not have a blocking
mode for DFC; it is only capable doing audits.
AMP for Android
The AMP for Android connector requires Android 2.1 or higher running on
ARM and Intel Atom processors with 4 MB of free space on the device.
Unlike with Windows and Mac, there are not many policy options for
Android. From the AMP cloud console, navigate to Management >
345
Policies > Android, where you can see existing AMP policies for Android
and create new ones.
Click Create Policy and then select FireAMP Android from the drop-down
and click Create Policy.
In the New Policy window that appears, provide a name and select the
custom detection created earlier, as shown in Figure 8-47. There is only one
option to configure at the bottom of the policy, Heartbeat Interval, as shown
in Figure 8-47.
Figure 8-47 Creating an Android Policy
Installing AMP for Endpoints
You have created policies for the different endpoints. The next step is to
assign those policies to groups so you can begin to deploy the AMP
connectors to the many endpoints in your organization.
346
Groups, Groups, and More Groups
Before you move on to installing AMP for Endpoints onto hosts, we should
really discuss an important organization component: groups. The AMP
administrative console uses groups to organize and manage computers
according to function, location, or other criteria that you determine. Policies
get assigned to groups and can inherit from parent groups for greater
control.
For example, you might create a group for each department of line of
business; however, there could be additional controls required, based on the
country of origin in which the computer normally resides.
Navigate to Management > Groups, where you see a list of all the top-
level groups in your organization. You can create, edit, or delete the groups
from this screen. If a group has child groups within it, this is indicated as
Figure 8-48 Top-Level Groups
To create a new group, click the Create Group button shown in Figure 8-
48. To create a new group, you provide a group name, description, and
parent group (if any) and you can assign existing known computers to it, as
shown in the upper right of Figure 8-49. At the bottom of the screen, you can
make this new group a parent by assigning other existing groups to it as
children.
347
Figure 8-49 Creating a New Group
In addition, as you can see in Figure 8-49, you can assign existing policies
to the group. This is where you select the policies you just created in this
chapter.
Click Save to save the new group.
Download Connector
Earlier in the chapter you saw the Download Connector screen, located at
Management > Download Connector (see Figure 8-50). Here you can
download installation packages for each type of AMP for Endpoints
connector, or you can copy the URL from where those connectors can be
download. Before downloading a connector, select the appropriate group so
the correct policies will be assigned and the installed computers will
appear in the correct group.
348
Figure 8-50 Download Connector Screen
The installer may be placed on a network share, distributed via management

software, or distributed via the Cisco AnyConnect Secure Mobility Client.
The download URL can be emailed to users so they can download and
install it themselves; this can be convenient with remote users.
Distributing via Cisco AnyConnect
At this writing, the AMP connector is not part of the Cisco AnyConnect
Secure Mobility Client, but you can use the AMP Enabler add-on to
AnyConnect to aid in the distribution of the AMP connector to clients who
use AnyConnect for remote access VPN, secure network access, posture
assessments with Cisco’s Identity Services Engine, and more. Figure 8-51
shows the AnyConnect Secure Mobility Client with the AMP Enabler tile.
349
Figure 8-51 AnyConnect Security Mobility Client
Installing AMP for Windows
On the Download Connector screen shown in Figure 8-50, Windows is the

first operating system. As you can see in Figure 8-52, there are a few
options to select when choosing to download the AMP installer for
Windows.
350
Figure 8-52 Downloading AMP for Windows
There is an option to have the connector perform a flash scan during the
install process. The flash scan checks processes currently running in
memory and should be performed on each install.
The second check box is an option to enable a redistributable file. This

option is not enabled by default, and when you click Download with this
disabled (the default), you download a very small (around 500 KB)
bootstrapper file to install the AMP connector. This type of installer is also
referred to as a “stub installer.”
A stub installer determines whether a computer is running a 32- or 64-bit

operating system and connects to the cloud to download and install the
appropriate version of the AMP connector. The connector is configured with
your policies, based on the group assignment.
If you select the Redistributable option and then click Download, you
download a much larger executable (around 30 MB) that contains the full
installation, both 32- and 64-bit versions.
You can place the executable file on a network share or push it to all the
computers in a group via a tool like Microsoft System Center Configuration
Manager (SCCM) or Active Directory Group Policies in order to install the
AMP connector on multiple computers. The bootstrapper and redistributable
installer also both contain a policy.xml file, which contains your assigned
policies and is used as a configuration file for the install. Administrative
rights are required for installing the connector interactively.
351
Figure 8-53 shows the UI displaying the URL to send to the end users.
Figure 8-54 shows an end user connecting to the installer stub through the
download URL entered into their browser. The stub installer is
downloaded, and when it’s executed, the Windows security subsystem asks
for permission to run the installer, as shown in Figure 8-55. You click Yes to
continue with the installation and download the full agent with the policies,
Figure 8-53 The Download URL
Figure 8-54 Downloading the Stub Installer
352
Figure 8-55 Windows Security Prompt
Figure 8-56 Installing the Agent on Windows
When the agent is installed on a Windows endpoint and the user interface is
configured to be visible, the AMP icon is in the system tray; clicking that
system tray icon brings up the summary window. Both the system tray icon
353
and the summary window are shown in Figure 8-57.
Figure 8-57 System Tray Icon and Summary Window
As shown in Figure 8-57, the summary window includes the current status
of the connection to the AMP cloud, the last date the system was scanned,
and the assigned policy. If you click Settings, you see the settings that are
configured in the policy, as shown in Figure 8-58.
354
Figure 8-58 Local GUI Displaying Settings
Installing AMP for Mac
The process of installing AMP for Mac is very similar to the installation
process for Windows. First, you select the group, but instead of
downloading a Windows executable file, you download a PKG file to
install the AMP connector. Or you can copy the URL, just as with Windows.
Also as with Windows, a Mac user must have admin privileges to install the
connector. Figure 8-59 shows the downloading of the PKG file.
355
Figure 8-59 Downloading the Mac PKG File
The PKG file is only about 7 MB, as there is no “redistributable”

equivalent. When the end user runs the PKG file, the step-by-step
installation begins, as shown in Figure 8-60.
Figure 8-60 Mac Installation GUI
356
When the agent is installed, if the user interface is configured to be visible,
there is an AMP icon in the menu bar. Clicking the menu bar icon allows
you to trigger an on-demand scan, sync the policy to the cloud, or get into
the settings, as shown in Figure 8-61.
Figure 8-61 Menu Bar Icon and Menu
You can click Settings to bring up the main AMP for Mac GUI. As you can
see in Figure 8-62, this GUI has four sections: Events, Policy, Scan, and
About. This is quite different from the Windows agent: You cannot see or
change the policy in the Mac GUI.
357
Figure 8-62 The Events Section of the AMP for Mac GUI
The Events tab in the GUI lists all the logged activities for quarantines,
detection, update, and scans.
Figure 8-63 shows the Policy section of the GUI, which provides some
visibility into the configuration, but not any settings to change.
358
Figure 8-63 Policy Section
Figure 8-64 shows the Scan section of the GUI, which allows you to initiate
a flash, full, or custom scan. It also shows any scans scheduled from the
centralized policy.
Figure 8-65 shows the About section of the GUI, which lists the AMP
connector version.
359
Figure 8-64 Scan Section
Figure 8-65 About Section
Installing AMP for Linux
Downloading the Linux connector provides you with an RPM (Red Hat
Package Manager, aka RPM Package Manager) file to be installed. The
installer is about 16MB and also contains the policy.xml file, which is used
as a configuration file for your settings. There is also a link to download the
GPG key, which is required for connector updates via the central policy.
Figure 8-66 shows the screen where the GPG key can be copied or
360
downloaded.
Figure 8-66 GPG Public Key
You can install the RPM via rpm or the yum toolset. To install via RPM,
you use the rpm -i command and option. For yum, use sudo yum localinstall
[install-file] -y. Figure 8-67 shows an example of using the rpm command.
361
Figure 8-67 Installing the Connector via rpm
If you plan on pushing connector updates via policy, you need to import the
GPG key into your RPM DB. Here’s how you do this:
Step 1. Verify the GPG key by clicking the GPG Public Key link on the
Download Connector page, as shown in Figure 8-66. Compare the key from
that link to the one at /opt/cisco/amp/etc/rpm-gpg/RPM-GPG-Key-cisco-
amp. Figure 8-68 shows the contents of that public key file, for comparison.
Figure 8-68 cat RPM-GPG-KEY-cisco-amp
Step 2. Run the following command from a terminal to import the key:
[sudo] rpm --import /opt/cisco/amp/etc/rpm-gpg/RPM-GPG-KEY-cisco-
amp
Step 3. Verify that the key was installed by running the following command
from a terminal: rpm -q gpg-pubkey --qf ‘%{name}-%{version}-%
{release} --> %{summary}\n’
362
Step 4. Look for a GPG key from SourceFire in the output.
The Linux connector has a command-line interface (CLI), as shown in

Figure 8-69.
Figure 8-69 Linux AMP CLI
Installing AMP for Android
AMP for Android comes in the form of an app. An end user can obtain the
app if you send a link to the app, send the app directly, or allow the user to
download the app from the Google Play Store.
Android Activation Codes
Before you can successfully install the app on an Android endpoint, an
363
activation code is required. Activation codes are generated in the console
GUI and do not have expiration dates by default.
In the Download Connector screen, click Activation Codes in the FireAMP

Android box, as shown in Figure 8-70.
Figure 8-70 Download Connector for Android
In the Android Activation Codes screen, click Create to generate a new

code, and you get a small form to fill out, including the new code value. The
Activation Limit setting is how many connectors may be activated using this
license code. You can choose an expiration date for the use of the code to
prevent any new activations with the code from that date forward. An
expiration date does not disable the connectors that were previously
activated by the code. Finally, you select the group that will use the
activation code. Only a single activation code can be applied to a group at a
time, so make sure you have assigned a high enough activation limit for the
number of devices in the group you are applying the code to. Don’t worry,
though: You can later return to the screen and edit the code to extend the
activation limit. You can also delete the old code and create a new code for
the same group. Again, deleting a code does not deactivate the connectors
that were previously activated; it simply prevents any new users from
activating their app with that code.
Click Create at the bottom of the screen to create the new activation code
and ensure that you notate the code for use in the next steps. Figure 8-71
shows the connector code being generated.
364
Figure 8-71 Generating the AMP Connector Code
Deploying the AMP for Android Connector
AMP for Android comes in the form of an app. An end user can obtain the
app if you send a link to the app, send the app directly, or allow the user to
download the app from the Google Play Store. Using the Google Play Store
is often considered the easiest method, since it is trusted to all Android
devices by default and doesn’t require changing security settings on the
device to allow apps to be installed from other sources.
Figure 8-72 shows the app in the Google Play Store. Click Install to
download and install it. When the installation is complete, open the app.
You are prompted to accept the license agreement, as shown in Figure 8-73.
365
Figure 8-72 Downloading the AMP Connector App
366
Figure 8-73 License Agreement
Next, you are asked to enter the activation code and provide an identifying
name for the Android device, as shown in Figure 8-74. If the code is active
and valid, you see a success message and then the main AMP app window,
367
Figure 8-74 Entering the License Code
368
Figure 8-75 AMP Main App Window
Clicking Settings in the Android AMP connector is a bit different from

clicking Settings in the other connectors, as the only option displayed is to
change the device name, as shown in Figure 8-76.
369
Figure 8-76 Settings
Proxy Complications
AMP for Endpoints needs to reach the AMP cloud through an Internet
connection, and that connection may require traversing a proxy server.
Sometimes there are complications with this process.
370
Proxy Server Autodetection
AMP for Endpoints can use multiple mechanisms to support anonymous

proxy servers. A specific proxy server or path to a proxy auto-config (PAC)
file can be defined in Policies, or the connector can discover the endpoint
proxy settings from the Windows registry.
The FireAMP connector can be set to discover endpoint proxy settings

automatically. When the connector detects proxy setting information, it
attempts to connect to the FireAMP management server to confirm that the
proxy server settings are correct. The connector first uses the proxy settings
specified in the policy. If the connector is unable to establish a connection to
the FireAMP management server, it attempts to retrieve proxy settings from
the Windows registry on the endpoint. The connector attempts to retrieve the
settings only from systemwide settings and not from per-user settings.
If the connector is unable to retrieve proxy settings from the Windows

registry, it attempts to locate the PAC file. This can be specified in policy
settings or determined using Web Proxy Auto-Discovery (WPAD). If the
PAC file location is specified in policy, it has to begin with http or https.
Note that the PAC files supported are only ECMAScript based and must
have a .pac file extension. If the PAC file is hosted on a web server, the
proper MIME type, application/x-javascript-config, must be specified.
Because all connector communications are already encrypted, https proxy is
not supported. For version 3.0.6 of the connector, a SOCKS proxy setting
cannot be specified using a PAC file.
The connector attempts to rediscover proxy settings after a certain number

of cloud lookups fail. This ensures that when laptops are outside the
enterprise network, the connector is able to connect when network proxy
settings are changed.
Incompatible Proxy Security Configurations
Some proxy and web security configurations are incompatible with AMP:
Websense NTLM credential caching: The currently supported

workaround for AMP is either to disable NTLM credential caching in
Websense or to allow the AMP connector to bypass proxy authentication
exception.
371
HTTPS content inspection: HTTPS content inspection breaks the AMP
endpoint agent’s communication with the cloud due to certificate pinning
and strong authentications. The currently supported workaround is either to
disable HTTPS content inspection or to set up exclusions for the AMP
connector.
Kerberos/GSSAPI authentication: The AMP connector does not work

with these authentication methods. The currently supported workaround is
either to use basic or NTLM authentication or to set up an authentication
exception.
Using the Cloud Console
When endpoints are running and reporting to the cloud, you see a populated
dashboard and can look for malware, threats, and indicators of compromise.
Figure 8-77 shows the AMP dashboard, indicating that one of the computers
with an AMP connector loaded has indicators of compromise, five counts of
malware detected on it, and even a list of the malware threats.
Figure 8-77 Dashboard
If you click Threat Detected link in the Indications of Compromise section
372
on the dashboard (see Figure 8-77), you are taken to the Events tab, but the
filters are prepopulated, as shown in Figure 8-78.
373
Figure 8-78 Drilling into the Events
Immediately, you can see that all the malware has the status Quarantine:
Success. This means AMP was able to isolate and block the malware. If you
drill into one of the pieces of malware detected, you can get more
information about the filename, the path, the parent, and more. You can also
look into the file trajectory and computer trajectory (see Figure 8-78) to
attempt to see where else the file has been and where else the infected
computer has been.
If you navigate to Analysis > Events, you get an unfiltered view of all
events. If you scroll down, you can see vulnerable applications being
reported. As you can see in Figure 8-79, the Windows client that AMP was
installed on had a vulnerable version of Java on it, and the vulnerability
CVEs are listed.
374
Figure 8-79 Bad Java
Upon recognizing systems with vulnerable applications, you can contact the
desktop team to have the system updated. Or you can have an indicator of
compromise trigger a correlation action in the Firepower Management
Center (FMC) that uses a remediation with Cisco Identity Services Engine
(ISE) to quarantine the endpoint on the network. This type of solution is
known as rapid threat defense with Firepower Management Center and ISE.
Summary
This chapter provides more than an overview of Cisco’s AMP for

Endpoints. It reviews the overall AMP architecture and where AMP for
Endpoints fits into that architecture. You have learned about the types of
AMP for Endpoints connectors, created policies for each of them, and gone
through their installations. You have used the AMP cloud console to see
whether AMP has detected and remediated malware and detected and
reported on threats, and you have seen how to follow file and computer
trajectories.
375
Chapter 9. AMP Threat Grid: Malware
Analysis and Threat Intelligence
Cisco AMP Threat Grid cloud
On-premises Cisco AMP Threat Grid appliance
This chapter introduces the cloud and on-premises Cisco AMP Threat Grid
deployment options. These two types of deployments present different
options, including the Cisco AMP, Email Security Appliance (ESA), and
Web Security Appliance (WSA).
Threat Grid is a deep threat analysis solution that leverages many

identification techniques, including sandboxing. It can be architected as a
cloud or on-premises solution. It does deep analysis of file samples that are
submitted to the AMP Threat Grid cloud or appliance. Cisco AMP Threat
Grid analyzes files based on behavioral indicators and malware knowledge
information and provides accurate and context-rich malware analytics. The
analysis results can be used for updating file disposition in the cloud that is
used by other cloud deployments.
Cisco AMP Threat Grid
Cisco AMP Threat Grid is a cloud and on-premises malware analysis

solution that was first introduced in FirePOWER v6.0.
Note
Cisco customers can deploy an on-premises Cisco Threat Grid appliance if

they do not wish to send any file information to the Cisco cloud or if they
are worried about bandwidth utilization.
With either an on-premises or cloud installation, security engineers can use

Cisco AMP Threat Grid to quickly correlate a single malware sample or
hundreds of observed activities and characteristics against millions of
376
samples in order to study malware behavior in a historical context. This
helps them defend against targeted attacks and threats from advanced
malware. Cisco AMP Threat Grid also can generate detailed reports,
including important behavioral indicators and threat scores that allow
security analysts to quickly prioritize and recover from advanced attacks.
Cisco AMP Threat Grid is not a single tool. It is a malware analysis and
threat intelligence solution. It crowdsources malware from a closed
community and analyzes all samples, using highly secure proprietary
techniques including static and dynamic analysis. It performs automated
analysis with adjustable runtimes while not exposing any indicators that
malware could use to detect that it is being observed and analyzed. That
way, Cisco AMP Threat Grid can still operate and analyze malware that
changes behavior to avoid analysis in sandbox environments.
Many think that the Cisco AMP Threat Grid offering is just a sandboxing
solution, but it is much more than just that. Sandboxing is a piece of the
solution, and its sandbox functions are performed in a way that evades
detection by malware. AMP Threat Grid uses an outside-in approach and
has no presence in the virtual machine. The sandboxing’s dynamic analysis
includes an external kernel monitor, dynamic disk analysis that illuminates
any modifications to the physical disk (such as the master boot record
[MBR]), monitoring of user interaction, video capture and playback, and
monitoring of process information, artifacts, and network traffic. The
following are some of the object types Cisco AMP Threat Grid supports:
Executable files (.EXE) and libraries (.DLL)
Java archives (.JAR)
Portable document format (.PDF)
Office documents (.RTF, .DOC, .DOCX, .XLS, .XLSX, .PPT, .PPTX)
ZIP containers (.ZIP)
Quarantine containers
URLs
HTML documents
377
Flash
Among its outputs, Cisco AMP Threat Grid provides video playback, the
Glovebox feature for malware interaction and troubleshooting, a process
graph for visual representation of process lineage, and a threat score with
behavior indicators of malware. The Glovebox feature helps analysts
dissect and interact with the malware in real time by recording all activity
for future playback and reporting. It correlates sample malware data
elements against billions of sample artifacts historically collected and
analyzed in order to match well-known malicious behaviors. The threat
score provided for analyzed malware is based on severity and confidence.
In addition, the more than 450 behavioral indicators, sourced from around
the globe, can show an analyst if a piece of malware is malicious,
suspicious, or benign—and why—which eliminates guesswork and helps an
analyst make better decisions more quickly.
Cisco AMP Threat Grid is integrated with Cisco security technologies that
span from the network edge to the endpoint, including Cisco AMP for
Networks, Cisco ASA with FirePOWER Services, Cisco Firepower Threat
Defense, Cisco Email Security Appliance, Cisco Web Security Appliance,
and Cisco AMP for Endpoints. In combination, these tools give
organizations more visibility than ever before. Information across many
platforms can be correlated and synthesized so organizations can make
faster, better decisions to more quickly eliminate threats and reduce the
harm caused by malware.
Cisco AMP Threat Grid also provides highly accurate, easy-to-integrate

security content feeds that help organizations generate context-rich threat
intelligence that is both actionable and specific. The feeds are available in a
number of standardized formats:
JavaScript Object Notation (JSON)
Cyber Observable Expression (CybOX)
Structured Threat Information Expression (STIX)
Comma-separated values (CSV)
Snort rules
378
Customized feed formats are also available for particular security products.
Using the powerful application programming interface (API), you can
import threat information into your security technologies, including security
information and event management (SIEM) solutions, graphical
visualization tools, and more to automate detection and response to even the
most sophisticated threats. Cisco AMP Threat Grid’s threat intelligence
allows administrators to look into markets and industries of interest. An
analyst can understand the relevancy of the executable sample as it pertains
to the environment and look at specific threat information for specific types
of data and take proactive, preventive action.
Among the security personnel who can benefit from Cisco AMP Threat Grid
are incident response and security operation team members and information
security executives. Incident response teams use Cisco AMP Threat Grid to
analyze malware submissions; search for malicious files, registry keys, and
URLs; and run malicious code in Glovebox. Security operation teams
generate threat scores, prioritize malware cleanup and remediation, and
submit suspicious code for analysis. Threat Grid empowers a security team
to act faster on malware, offers a more complete security solution by
integrating with existing technologies, and accelerates detection of
advanced attacks.
The rest of this chapter presents specifics of the cloud and appliance
deployment options for Cisco AMP Threat Grid and briefly presents details
on how to configure them.
Cisco AMP Threat Grid Cloud Solution
The Cisco AMP cloud includes multiple analytics engines constantly

correlating data. Threat Grid is one of them. The analysis results generated
by AMP engines are used to update the AMP signatures. Other machine-
learning engines are used to refine signatures and reevaluate detections of
indicators that have already been caught. AMP does not serve as a static
signature repository. Decision making and intelligent operations take place
in real time, evolving constantly based on the data that is received.
As mentioned previously, AMP Threat Grid’s cloud solution allows users to

submit malware samples to the cloud for analysis and receive detailed
reports that identify important malware behavioral indicators and assign
threat scores. Security teams can then rapidly prioritize and recover from
379
advanced attacks. Figure 9-1 shows the Firepower Management Center
(FMC) with the AMP cloud located in U.S. and EU data centers. An AMP
private cloud option is also available for organizations that do not want
malware information shared in the cloud.
Figure 9-1 AMP Cloud Location
Cisco AMP Threat Grid can be accessed via a portal page. Files can be
submitted for analysis using the browser. All the results can be easily
retrieved from the web page. Malware samples can also be compared with
other samples and searched for. In addition, with Cisco AMP Threat Grid
cloud, you can define the malware runtime from 5 to 30 minutes.
Threat Grid exposes an API that integrates with existing security solutions
and can create custom threat intelligence feeds. It can automatically receive
submissions from other products and pull the results in the environment.
Cisco AMP Threat Grid’s analysis, threat intelligence correlation, and feeds
retrieval can be automated and integrated with existing security solutions
using the API. Security tools can also access and integrate with it by using
the Threat Grid API.
Administrators can navigate to AMP > Dynamic Analysis Connections in

FMC (see Figure 9-2) to configure cloud HTTPS connections that the Cisco
ASA with FirePOWER Services or Cisco Firepower Threat Defense will
be using to get attribute and dynamic analysis updates to verify whether
malware samples are malicious. Cisco ESA and WSA also integrate with
Cisco Threat Grid cloud, leveraging a similar outbound HTTPS connection
380
configured in the File Reputation Filtering and File Analysis page.
Figure 9-2 AMP Dynamic Analysis Connections
Cisco AMP Threat Grid On-Premises Appliance
Even though the Cisco AMP Threat Grid cloud-based solution can serve
many organizations well, others might require no outbound connections to
the cloud transferring information externally. Organizations with such
compliance and policy restrictions can submit malware samples to the AMP
Threat Grid on-premises appliance for local analysis and ensure policy
enforcement and compliance. The appliance also has the capability to
manually update its knowledge base while complying with corporate or
regulatory policies to keep all information within logical boundaries and not
transfer it externally.
The Cisco AMP Threat Grid appliances (TG5000 and TG5500) are hosted
in a Cisco UCS C220 hardware server. They can analyze 1500 and 5000
samples per day, respectively.
Similarly to the cloud, with the Cisco AMP Threat Grid appliance, malware
samples are analyzed using static and dynamic analysis techniques, and the
results are correlated against millions of analyzed malware artifacts;
however, in the case of the on-premises appliance, information is not sent
out of an organization’s logical boundaries. Security teams can quickly
correlate a single malware sample’s activity and characteristics against
other samples to analyze its behaviors in historical and global contexts to
defend against targeted attacks or general threats from advanced malware.
As shown in Figure 9-2, in FMC administrators can navigate to AMP >

Dynamic Analysis Connections to create new connections to the Cisco
AMP Threat Grid appliance rather than using the public cloud to analyze
files traversing an ASA with FirePOWER Services or Cisco Firepower
Threat Defense (FTD). These connections allow the firewall to connect the
Threat Grid appliance to get files analyzed and find their posture. The Cisco
ESA and Cisco WSA offer similar integration with Threat Grid. If the
381
system is configured to connect to an on-premises appliance, it can use the
default public cloud connection for public report retrieval. If the appliance
cannot generate a dynamic analysis report about a file, it queries the Cisco
AMP cloud. In an on-premises appliance deployment, public cloud reports
returned to the system by the cloud are scrubbed and returned with limited
data.
The initial configuration of a device (Cisco ASA with FirePOWER

Services, Cisco FTD, Cisco ESA, or Cisco WSA) consists of configuring
Secure Sockets Layer (SSL) certificates so the appliance can communicate,
registering the device in the appliance, creating a user, and configuring the
device to connect to the appliance, as demonstrated in Figure 9-3. In the
Cisco ESA and Cisco WSA, Cisco AMP Threat Grid dynamic file analysis
is enabled in the File Reputation Filtering and File Analysis page.
Figure 9-3 Adding a New Connection to a Cisco AMP Threat Grid

Appliance
The appliance itself has an administrator interface, a clean interface that

connects to the trusted inside network, and a dirty interface for the untrusted
network. Access to the appliance is from the administrator interface, using
the graphical user interface in a browser. The web interface allows for file
submission for analysis, report generation about malware activities and
network traffic, result retrieval, sample searches, and comparison.
To analyze malware, an administrator has the opportunity to run and interact

with it in Glovebox for 5 to 30 minutes to observe its behaviors. Malware
analysis, threat intelligence correlation, and feeds retrieval are other
features the web interface offers. These can also be automated and
382
integrated with existing security solutions using the API. A powerful
representational state transfer (REST) API allows organizations to integrate
the appliance with existing security infrastructure, such as gateways,
proxies, and SIEM platforms. The API can also be used to automatically
consume submissions from third-party endpoint agents, deep-packet-
inspection platforms, and investigation tools. Numerous partner solution
integrations showcase that functionality. Finally, the user interface offers
customizable workflows that are designed for security operations center
(SOC) malware analysts and forensic investigators to perform their day-to-
day operations.
Default Users
The default Cisco AMP Threat Grid portal administrator username is

admin, and the password is changeme.
The default Cisco AMP Threat Grid OpAdmin administrator’s password is

“threatgrid,” which is the same as the Threat Grid portal user password, and
it is maintained in the OpAdmin interface.
As previously mentioned, the Cisco AMP Threat Grid appliance is a Cisco

UCS server. It also comes with the Cisco Integrated Management Controller
(CIMC) for low-level server administration. The default username for the
CIMC is admin, and the default password is password.
Tip
It is highly recommended that you change the device password and that you
use strong passwords to increase the security posture of the device and to
reduce its attack surface.
Once the user accounts are set up, the administrators or other users can log
in and begin submitting malware samples for analysis.
Network Segment Configuration
As mentioned previously, the Cisco AMP Threat Grid appliance has three
required networks:
383
Administrative (admin) network: This network must be configured in
order to configure the appliance.
Clean network: This network is used for inbound trusted traffic

(requests) to the appliance, including traffic from other integrated systems
(for example, Cisco ESA, Cisco WSA).
Dirty network: This network is used for outbound traffic, including

malware traffic.
Tip
A best practice is to configure a dedicated external IP address for the

appliance that is different from your corporate IP address in order to protect
your internal network.
Summary
This chapter provides an overview of the Cisco AMP Threat Grid solution,
which offers an efficient and granular file analysis and context-rich and
accurate malware analytics. This chapter also explains how Cisco AMP
Threat Grid can be used in conjunction with Cisco AMP to offer a complete
malware protection and analysis solution that operates throughout the attack
continuum—before, during, and after a malware compromise—and helps
organizations understand what malware is attempting to do, the threats it
poses, and how to defend against it. The cloud-based AMP Threat Grid
solution offers flexibility of deployment and off-the-shelf analytics from the
Cisco AMP cloud. On-premises AMP Threat Grid deployments, on the other
hand, serve organizations that want to use Cisco AMP Threat Grid’s
granular analysis without transferring information to the cloud.
384
Chapter 10. Introduction to and Deployment of
Cisco Next-Generation IPS
The chapter covers the following topics:
NGIPS basics
Deployment design considerations
The NGIPS deployment lifecycle
Attackers have constantly improved their methodologies of exploiting gaps

in security by concealing their malicious activities and potential intrusions
in spite of the security controls used in an infrastructure. Detection
challenges are introduced by complicit users, misaligned policies,
sophisticated attackers, naïve users, complex geopolitical relations,
dynamic threats, and more. Next-generation intrusion prevention systems
(NGIPS) has become a very important component of security architectures,
providing protection against traditional and sophisticated types of attacks.
This chapter introduces NGIPS and compares it with legacy intrusion

prevention systems (IPS). It presents a number of design concepts,
principles, and challenges for NGIPS deployment. The chapter also
explores some basic deployment scenarios and explains the basic design
considerations security architects need to address when deploying NGIPS.
The chapter concludes with coverage of the NGIPS deployment lifecycle
followed in most NGIPS deployments.
NGIPS Basics
The following sections introduce the basic concepts of NGIPS and how it
compares to legacy IPS. The following sections also present Cisco NGIPS
products and their capabilities as well as peek at some basic deployment
modes and scenarios. After reading these sections, you will be familiar with
NGIPS and Cisco NGIPS and ready to move into NGIPS deployment design
concepts.
Legacy IPS Versus NGIPS
385
Legacy IPS were traditionally used in network infrastructures to protect
against known security threats. Often, two concepts were used: IPS and
intrusion detection systems (IDS). IDS mostly detect and generate alerts for
various attacks or intrusion attempts, whereas IPS can also prevent and
mitigate attacks. The remainder of this section focuses on IPS, but you
should note that there are no significant differences between the
methodologies used in IPS and IDS for attack detection.
Legacy IPS depend mostly on matching signature-based patterns to identify

and potentially prevent malicious activity. These are some of their basic
characteristics of legacy IPS:
They are sometimes deployed behind a firewall when providing IPS

functionality (inline). Often, an IPS is also placed in the network without a
firewall in front of it.
They often look for attempts to exploit a vulnerability and not for the
existence of a vulnerability.
Legacy IPS often generate large amounts of event data that are difficult to
correlate.
They focus on individual indicators/events without focusing on contextual

information to take action.
Legacy IPS require manual tuning for better efficacy.
Thus, legacy IPS suffer from certain shortcomings, including the following:
They often need to be operated in conjunction with other products or tools

(firewalls, analytics, and correlation tools).
They are sometimes not very effective and may be ignored.
Their operation costs and the operating resources they need are high.
They can leave infrastructures imperfectly covered against attackers.
NGIPS supplement legacy IPS functionality with more capabilities, such as

the following:
Application awareness and control: NGIPS provide visibility into Layer
386
7 applications and can protect against Layer 7 threats.
Content awareness of the information traversing the infrastructure:

For example, knowledge about files transferred between two hosts can be
used to identify viruses transferred and the trajectory of a virus infection in
a system.
Contextual awareness: This helps better understand alerts and

automatically deduce comprehensive information about the events taking
place, which makes the NGIPS less complex and means it requires less
tuning.
Host and user awareness: The infrastructure offers more conclusive

information about the events taking place.
Automated tuning and recommendations: This allows an administrator

to follow recommendations and tune signatures specifically to his
environment.
Impact and vulnerability assessment of the events taking place: The

impact of a security event identified by the system can be evaluated based
on the information available for the environment. For example, a Windows
system that is identified to secure a vulnerability cannot be severely
impacted by an attempt to exploit the vulnerability against it.
Thus, it is clear that in the threat landscape of both today and in the future,
NGIPS functionality has an important role in protecting and providing
coverage against known attacks and new types of exploits.
Cisco NGIPS Capabilities
Modern networks constantly evolve, as do miscreants and their attack

methods. People and machines that could misbehave reside inside and
outside a network infrastructure. Devices are communicating in many
different forms. The interconnected infrastructure with attackers that could
be located anywhere is called the any-to-any challenge. Almost all modern
environments face this challenge. Cisco is a leader in NGIPS, offering
Cisco Firepower NGIPS products that can provide protection against
constantly evolving attack surfaces in these environments.
387
Modern security tools need to integrate directly into the network fabric in
order to maximize performance and efficiency. Responses need to be
comprehensive and simple. Protection must be continuous. Network
controls should not be implemented disparately and individually. To abide
by these modern security requirements, Cisco follows a new security model
that looks at the actions needed before, during, and after attacks that apply to
mobile devices, virtual machines, endpoints, or more (see Figure 10-1). The
Cisco Firepower NGIPS functionality operates mostly in the during phase of
the attack continuum, but all phases are covered by the integrated
capabilities of the Cisco Firepower product portfolio.
Figure 10-1 The Attack Continuum and Where Security Functions Fall
The following are some of the key differentiators of the Cisco NGIPS
portfolio from other vendors:
Trusted security engine and security intelligence provided by Cisco
Security automation and behavioral and retrospective analysis
388
Network and context awareness and visibility
The Cisco Firepower NGIPS engine is based on well-defined open source

Snort. Snort, originally created by SourceFire, is an open source IPS tool
that is widely used in the industry. The Cisco Snort IPS rules in Snort are
developed by the Cisco TALOS team and are open for inspection. They are
built based on collective security intelligence by Cisco TALOS and a
variety of other sources. The rule set offers broad product and threat
coverage. In addition, third-party rules can be integrated and customized in
the Cisco NGIPS.
The Cisco NGIPS products include the following:
Cisco ASA5500-X with FirePOWER Services: Multiple ASA5500-X

products for different performance requirement can run FirePOWER
Services to leverage Cisco NGIPS capabilities in software (5506-X, 5512-
X) or hardware modules (ASA5585-X).
Cisco Firepower next-generation firewall (NGFW) appliances (4100,

9300 series): Threat-centric security appliances are available for service
providers that run Firepower Threat Defense (FTD). FTD includes
Application Visibility and Control (AVC), optional Firepower NGIPS,
Cisco Advanced Malware Protection (AMP), and URL filtering.
Cisco Firepower appliances (7000, 8000 series): Standalone NGIPS

appliances are available for different performance requirements.
vNGIPS: Firepower Virtual NGIPS is available for virtual environments.
The following are some of the most important capabilities of Cisco NGIPS:
Threat containment and remediation: Cisco Firepower NGIPS provides

protection against known and new threats. Its features include file analysis,
packet- and flow-based inspection, and vulnerability assessment.
Application visibility: Cisco Firepower NGIPS offers deep inspection

and control of application-specific information for better efficacy.
Identity management: NGIPS policies can be enforced by using

contextual user information.
389
Security automation: Cisco Firepower NGIPS includes automated event
impact assessment and policy tuning.
Logging and traceability management: This can be used in retrospective

analysis.
High availability and stacking: Cisco Firepower NGIPS provides

redundancy and performance by leveraging multiple devices.
Network behavioral analysis: Key behavioral indicators and threat

scores help analysts prioritize and recover from attacks.
Access control and segmentation: Access policies can be applied to

separate traffic profiles in the network.
Real-time contextual awareness: NGIPS discovers and provides

information about applications, users, devices, operating systems,
vulnerabilities, services, processes, files, and threat data related to IT
environments.
To leverage its capabilities, NGIPS needs a robust and comprehensive

management platform. For NGIPS management, Cisco offers the following:
Cisco Firepower Management Center (FMC) (appliance or virtual) for

multiple devices
Cisco ASDM (which, at this writing, can be used only in some ASA with
FirePOWER Services models)
As shown in Figure 10-2, there are two connectivity flows between the
FMC and the NGIPS that offer device policy configuration from FMC to the
NGIPS and information collection from the NGIPS to FMC for further
intelligent analysis and reporting.
390
Figure 10-2 FMC Connection Flow with NGIPS Devices
The following are some of the features provided in the Cisco FMC:
Policy management
Display of event and contextual information, using various formations
Health and performance monitoring
Notifications and alerts filtering
Correlation, vulnerabilities, indications of compromise, and remediation

features for real-time threat response
Custom reporting
High availability
391
By combining top-notch platforms, research, and management, Cisco offers
a complete NGIPS tool set that allows a security architect to build secure
and simple-to-operate architectures.
NGIPS Modes
As in legacy IPS, NGIPS can operate in two different modes: inline and
monitoring. Inline mode is the most common mode for a device used for
prevention. Inline NGIPS can be placed between two assets that
communicate or at a point that aggregates traffic from various sources—
between a switch and a firewall or between a router and a switch—to block
and mitigate threats. Two of the interfaces of the NGIPS are used in an
inline pair for traffic to enter and exit the device after being inspected.
Based on the configured policies, traffic can be dropped, allowed, or reset.
The caveat with inline NGIPS (Figure 10-3) is that in the event of a
software failure or a loss of power, all traffic is dropped. The fail-open
capability can be used for such situations to allow traffic to hardware
bypass the device and avoid traffic loss. Fail-open should not be used when
the security policy doesn’t allow for traffic to go unaccounted for or
uninspected.
Figure 10-3 NGIPS in Inline Mode
Inline mode offers two more modes of operation: routed and switched. In
routed mode (see Figure 10-4), the device operates at Layer 3, as a router
would. In switched mode (see Figure 10-5), the NGIPS is in transparent
mode and doesn’t show in the path as a Layer 3 hop. It uses two interfaces
in a VLAN pair and bridges them together.
392
Figure 10-4 NGIPS in Router Inline Mode
Figure 10-5 NGIPS in Switched Inline Mode
Monitoring (passive) mode is the mode where the NGIPS does usually not
prevent attacks. The device uses one interface to silently inspect traffic and
identify malicious activity without interrupting traffic flow (see Figure 10-
6). It is usually connected to a switch’s span port, a mirrored port, or a
network tap interface. Even though in monitoring mode the device doesn’t
block traffic, there is an option to reset malicious connections, but that
should not be considered as a mitigation mechanism as it can’t guarantee
attack prevention.
Figure 10-6 NGIPS in Monitoring (Passive) Mode
All Cisco NGIPS products (ASA FirePOWER Services modules,

Firepower Threat Defense, NGIPS appliances, and vNGIPS) can operate in
393
the modes described. Specifically for the ASA FirePOWER Services
module, the modes and how they can be configured are presented in Chapter
2, “Introduction to and Design of Cisco ASA with FirePOWER Services.”
NGIPS Deployment Locations and Scenarios
The NGIPS can be deployed in various locations of an infrastructure. Figure

10-7 shows some typical NGIPS locations.
Figure 10-7 NGIPS Deployment Locations
In perimeter deployments, the device monitors attacks from the outside. It is

usually deployed behind a perimeter access control device such as a
firewall that is responsible for enforcing access policies so that the NGIPS
does not spend resources inspecting traffic that should not be traversing the
network.
A demilitarized zone (DMZ) is a partly trusted area where web and other
servers reside. There is a certain risk for DMZ devices like servers, and
thus an NGIPS is often deployed to protect them.
394
An NGIPS deployed at the core of a network detects insider threats and
attacks. It also often identifies malware propagation, worms, and outbound
malicious activity. Cisco NGIPS network discovery is more accurate when
deployed closer to the core as internal network traffic is evaluated and
provides more accurate discovery results.
Extranets provide connectivity from an enterprise to its partners’,

suppliers’, and customers’ networks. Such networks could carry concerns
and threats that are not welcome to the enterprise. NGIPS can provide
protection against those threats and secure sensitive information.
NGIPS can also be deployed in critical network segments—that is, parts of

the network that contain highly valuable assets, also called “crown jewels.”
These assets could include valuable servers that contain sensitive data and
private information and e-commerce systems that are highly regulated.
NGIPS may also be used in the following locations:
Branch office links
Out-of-band management networks
Cloud services (usually virtual NGIPS)
NGIPS Deployment Design Considerations
Security architects consider a number of different factors when designing

and deploying NGIPS in an infrastructure. There are multiple questions to
answer in the requirements definition phase to find the most efficient
solution. This section discusses some basic considerations security
engineers usually come across when designing the deployment of an NGIPS.
Threat Management and System Capabilities
The threat management and overall system capabilities provided by an

NGIPS are important for security engineers. Multiple vendors offer systems
with different features and protection capabilities. Even though each vendor
can make claims about the system’s efficacy, it is important to understand
what the system can and cannot do in order to help customers maximize the
protection of their investments.
395
It is vital to perform a threat analysis against the security model to
determine how the NGIPS would perform against it. For the Cisco threat
model, the NGIPS should provide protection before and during an attack,
and it should offer the analysis functionality during and after. Retrospective
historical analysis is also important for a protection system to offer a
holistic approach to protection after an attack. A good understanding of the
candidate system will help in evaluating the system against the security
model and also against current and modern threats. You should perform
threat analysis before evaluating the system against the security model as
threats could significantly vary depending on the architecture.
The following are some of the features and capabilities security architects
have to think about:
Mode: You need to determine whether to use inline or passive mode and
whether to use a physical or virtual sensor when designing an NGIPS
solution.
Real-time contextual awareness: The capability of looking through

multiple contexts—such as applications, users, devices, operating systems,
vulnerabilities, services, behaviors, and files—is important for modern
systems.
Open standards: It is important to be able to trust the rules and the

efficacy of the system rules. Using open standards helps by allowing
integration with third-party rules.
Manageability, visibility, and orchestration: Ease of use reduces the cost

of owner-ship and provides better efficacy in today’s diverse environments.
Capabilities such as automated impact assessment, IPS policy tuning,
behavior analysis, anomaly detection and correlation, and user
identification certainly increase the ability of operators to perform their
jobs faster and more efficiently.
Advanced features: Functions such as application control, URL filtering,

and malware protection increase the security an NGIPS offers.
Security and regulatory compliance: An NGIPS solution should be able

to enable the enforcement of practices described in security standards (such
as CISSP and the ISO 27000 series) in order to provide regulatory
compliance (for example, with PCI, HIPAA, SOX, and FISMA).
396
Reporting: The reporting requirements of an organization should be
cross-referenced with the reporting capabilities of the system. Custom
reporting is often required by modern NGIPS to allow quick analysis and
response to security incidents.
Flow Handling
In order to be inspected, packet flows need to traverse the same device.

Cisco ASA with FirePOWER Services, Firepower Threat Defense, and
NGIPS appliances need to able to process and analyze protocols by
performing analysis on traffic bidirectionally.
NGIPS devices traditionally are challenged when processing asymmetric

flows because they cannot monitor the flow bidirectionally. In asymmetric
flows, the forward and return paths are not the same. For example, packets
flowing to a server do not follow the same hops as the returning packets.
Asymmetric flows are often expected and designed in properly designed
networks. They offer redundancy and take advantage of optimized switching
fabrics and scalable uplinks. NGIPS devices cannot take action on packets
they can’t see, and they do not tolerate too many missed packets. The
primary issue with asymmetric traffic and IPS is performance because
unidirectional traffic needs to be buffered longer in order to wait for
retransmissions and degraded detection because of missing packets in one
direction. Figure 10-8 shows how the Link Aggregation Control Protocol
(LACP) hashing algorithm of the port channel can end up creating
asymmetric flows seen by two different NGIPS devices.
397
Figure 10-8 Asymmetric Flows in a Redundant Data Center
Network architects need to ensure that asymmetric packets flow in a

deterministic manner and are properly handled. Specifically for Cisco ASA
with FirePOWER Services, ASA Cluster Context Pairing allows for the
packets of the same connection to be forwarded to the same firewall and
thus be inspected by the same NGIPS device, ensuring better security.
Scale and Availability
A vary basic factor in network design is performance. With today’s

bandwidth-intensive, chatty applications and constantly increasing
bandwidth requirements, an NGIPS scalable and extensible deployment is a
requirement. In addition, in environments with high-traffic profiles and low-
latency requirements (such as a data center), the integration with the fabric
is important. For example, an NGIPS being able to integrate with virtual
port channel (VPC) links in a data center allows for more integrated
398
architecture.
For low latency, passive mode deployments would be more ideal, but they
are not always possible due to security requirements. For example, what
happens to a low-latency stock trading application in an overwhelmed
NGIPS? The Cisco NGIPS offers a rule latency threshold option that can be
configured to suspend the rules when processing time exceeds the
configured limit. In addition, the Cisco NGIPS appliance has a feature
called Automatic Application Bypass (AAB) that limits the time allowed to
process packets through an interface.
Cisco offers high-performance NGIPS functionality that can serve today’s

applications. Performance and high-traffic processing are vital. For cases in
which more processing power is required, Cisco ASA can allow multiple
ASAs with FirePOWER Services to form a cluster (ASA Clustering Context
Pairing) and serve much more aggregate bandwidth than a standalone
device. Cisco Firepower NGIPS appliances themselves can be stacked
together, and this more robust stack of systems then acts as one. In order to
set up stacking, the primary device needs to be connected to all secondary
devices using two stacking cables and a stacking module (see Figure 10-9).
Figure 10-9 Cisco Firepower Appliance Stacking Module
Downtime is important for networks. Some critical infrastructures have zero

downtime requirements. The recovery time from a failure is important. In
addition, the mean time between failure (MTBF) is often a good indicator of
the average time a device stays up. Multiple high-availability features
ensure that a whole network will not go down when a failure occurs.
399
Some features include hardware and link redundancy. For link redundancy,
port channel support is widely used. For hardware redundancy, Cisco ASA
Clustering combines multiple ASA devices (with FirePOWER Services) to
provide high throughput and ensure that hardware failure can be properly
handled by the other devices. Cisco ASA Clustering also ensures that the
same flows are handled by the same device, thus eliminating asymmetric
routing. Figure 10-10 shows how flows are transported over the cluster
control link and processed by the same device. What’s more, just for device
pairs, the ASA offers the failover feature (active/standby or active/active
failover pair) that automatically fails over to the healthy device in the event
of a failure. The FirePOWER Services module state is not synced in this
scenario.
400
Figure 10-10 ASA Cluster with FirePOWER Service Sending Packets to
the Right ASA Through the Cluster Control Link
Cisco Firepower NGIPS appliances also offer Firepower clustering (high

availability), which differs from the ASA clustering mentioned previously.
Firepower clustering establishes resiliency between two appliances or two
stacks. Clustered devices synchronize state via a dedicated HA link. Both
devices in a cluster must be the same model and have identical interfaces,
software, and licenses. In the event of a failure, automatic failover takes
place. Firepower clustering is a lot like having multiple standalone
appliances, except duplicate events are suppressed.
If you have deployed a standalone device that has a zero downtime

requirement, what happens if the device fails at some point? The fail-open
feature offered in the Cisco NGIPS device allows you to bypass processing
in the event of a failure and thus avoid downtime.
Thus, there are multiple options that can provide redundancy, performance,
and extensibility. It is up to the security architect to consider the current and
future network requirements and design for a highly scalable and failure-
resilient NGIPS deployment.
Note
Firepower clustering and stacking are not supported on all models. We

recommend using the Cisco configuration guides for platform-specific
information.
Management Platform Integration
NGIPS management platforms aggregate and correlate information from the

appliances and assess and control the overall activity that occurs on the
network. Given the criticality of being able to manage and monitor the
security of a network, you often want to plan for downtime in management
platforms. Some management platforms offer high-availability capabilities
to ensure that there is redundancy so that a failure does not render an NGIPS
unusable.
Losing connectivity to a management platform should not render the NGIPS
401
it manages unusable. Losing visibility of the events and configuration is
acceptable, but the detection and blocking of malicious traffic should
continue, and all collected events should be transmitted when the manager is
recovered.
The Cisco FMC can operate in high-availability mode. Policies, user

accounts, and more are shared between two Firepower devices. Events are
automatically sent to both members of the redundant pair. If the FMC on one
of them fails, the other one will take over. In redundant mode, two FMCs
share the following information:
User account attributes and user roles
Authentication configuration
Custom dashboards and workflows
Intrusion detection, file control, access control, discovery, and correlation

policies
Device attributes
Scale is also important to the management platforms. Depending on the

number of NGIPS devices, you can choose different management platforms.
For the FMC, for example, a FS4000 can support up to 300 sensors with a
maximum of 300 million events with 20,000 flows per second.
The ASDM is a standalone device management tool and thus does not
include any redundancy scenario. Practically, ASDM is launched from the
client application and connects to the ASA with FirePOWER Services or
the NGIPS module for management.
Licensing and Cost
The overall cost of ownership is one of the most important factors in

choosing the hardware that serves your security needs. For some vectors,
licensing may be structured in ways that make the price of a product
appealing, but the total end price after adding the necessary licenses ends up
being much higher. Of course, you should purchase only licenses that enable
the capabilities needed.
402
Although pricing is important, you should keep in mind that in today’s
complex infrastructures, standalone devices at high prices are not always
the best way to go. Today’s business is focused on generating results, and
the infrastructure should align with that goal. Thus, implementing
architectural approaches that deliver business outcomes is usually more
important than purchasing purely cost-effective devices for the network
without having a holistic architectural strategy.
Specifically for Cisco Firepower NGIPS, the following licenses are

available:
Protection: This type of license allows managed devices to perform

intrusion detection and prevention and enables file control, as well as
intelligence filtering, clustering, and stacking.
Control: This type of license requires a Protection license and enables

user and application control. It also allows devices to perform switching
and routing.
URL Filtering: This type of license enables cloud-based category and

reputation URL filtering. It requires a Protection license and a Control
license.
Malware: This type of license enables network-based advanced malware

protection.
FireSIGHT is an additional license that comes with FMC. It allows host,

application, and user discovery. If NGIPS management is performed with
ASDM, a separate license is not required.
Note
Licenses are installed on the FMC and not on a managed device. FMCs in a
high-availability pair do not share licenses. Therefore, each platform needs
a separate FireSIGHT license. When using high availability, all FMC
licenses must be replicated on both sides for high availability to work
successfully.
NGIPS Deployment Lifecycle

403
IT and network deployment of NGIPS is an iterative process. It doesn’t
finish as soon as the equipment is installed on site. It continues after the
implementation and constantly gets adjusted according to the organization’s
security needs and findings. The deployment lifecycle consists of four steps,
as illustrated in Figure 10-11:
Step 1. Policy definition
Step 2. Product selection and planning
Step 3. Implementation and operation
Step 4. Evaluation and control
Figure 10-11 The NGIPS Deployment Lifecycle
The policy definition phase dictates the product selection and deployment
plan that are chosen to satisfy it. After the selection step, the system gets
deployed in the network. The operation and continuous evaluation ensure
that the system is performing its tasks efficiently and successfully. At times,
adjustments need to be made either because of changes in the policy or
based on findings. The following sections describe all the steps in the
deployment lifecycle.
Policy Definition
The security policy is the basis for security deployments. This policy
defines what is considered important and how it will be protected in an
infrastructure. Product and implementation are chosen in order to satisfy the
404
security policy. Two organizations with exactly the same assets could have
completely different security policies because of the way they assess risk.
For example, a hospital with virtual servers in the DMZ needs to comply
with HIPAA rules and thus could have a very different policy from a car
repair shop that hosts its website in the DMZ. Thus, the deployment of an
NGIPS or other security products starts with policy definition.
The policy definition phase includes threat analysis, as mentioned in

Chapter 9, “AMP Threat Grid: Malware Analysis and Threat Intelligence.”
Before deciding on mitigations, the assets need to be identified, and the
threats posed to them need to be defined. Then the threats are assigned risk
(using risk analysis models). At this point, the security model is used to
determine how the high-risk threats will be addressed (prevented or
mitigated if they occur). After all potential mitigations are in place, there
might still be risk (residual risk) that the security policy needs to address or
accept. There will potentially be threats with mitigation costs higher than
the cost of the risk occurring. In such a case, the risk may be accepted with
no action taken. Of course, there are multiple tangible and intangible cost
factors that can go into a security threat, and such risks should be evaluated
carefully.
Compliance standards also influence the policy definition extensively.

HIPAA, PCI, ISO, and other standards involve different rules that a security
policy needs to satisfy in order for the organization to be compliant.
Compliance audits focus on finding holes in the policy that could potentially
render an organization not compliant.
After evaluating threats, risk, the security model, and compliance

requirements, a security team finalizes the security policy that is used as the
baseline for choosing the product and planning its deployment, as described
next.
Product Selection and Planning
During the product selection and planning phase, a security team identifies
the device that will fulfill the security policy requirements and puts in place
a plan for implementation. This phase defines the details of how the security
policy will be met. A write-up of all the requirements is created in order to
help in the product decision and the implementation. After the product
decision is made, having a detailed implementation plan in place helps
405
ensure a successful installation with reduced complexity. The security team
needs to account for predictability and risk awareness before proceeding
with the installation.
Because the product selection dictates the success of the NGIPS installation,
the requirements definition that serves as input to the decision process needs
to be as detailed as possible. Some determining factors are device type,
deployment size, cost, other security devices, scaling requirements, and
responsibilities:
Security architects start by identifying the use cases of the deployment. For
example, an NGIPS deployed to prevent malware in a school is different
than an NGIPS for preventing data exfiltration in a bank.
The location of the NGIPS also plays a role in the requirements document
as each location assumes different performance and security requirements.
Potential locations could be Internet edge, data center, branch, and core. It is
obvious that the performance and availability requirements in a data center
are not the same as those in a branch office. For example, an NGIPS in a
data center looking at only internal traffic will not identify as many threats
as when sitting at the Internet edge, looking at the wild Internet traffic.
The team needs to choose deployment options such as inline, passive,

routed, switched, standalone appliance, or ASA with FirePOWER Services,
Firepower Threat Defense, or virtual NGIPS, based on the use case and
deployment locations.
Connectivity is the next subject of interest. How many sensing interfaces

are needed? Are they going to be passive taps or inline interface pairs?
Copper or fiber? What are the speed, link aggregation, and wireless setup?
The answers to all these questions need to be documented for comparison
against the NGIPS vendor options available.
Performance and scale are important considerations. How much traffic

needs to be processed by the NGIPS? How much latency is acceptable?
What is the peak number of connections, and what is the maximum
connection rate? These questions need to be answered when scaling a
deployment. Cisco ASA clustering and Firepower NGIPS stacking can be
used to increase the aggregate NGIPS throughput.
Vendor data sheets should cover device performance for engineers to use.
406
Traditionally, the firewall industry has almost always published maximum
throughput numbers in data sheets. Engineers should ensure that performance
numbers are sufficient in the deployment environment. The IPS industry has
generally been more conservative about throughput estimates on data sheets,
partly because the performance range varies based on features used and
traffic patterns. In general, using extra features increases processing load
and decreases performance. For example, a Cisco Firepower NGIPS
running malware inspection and application control could in some cases run
below its nominal performance numbers. You should exercise caution when
investigating published performance data sheets and ensure that they match
the deployment use case in question.
Availability also needs to be in the requirements list. Is bypass (fail-open)

or non-bypass going to be used? Is clustering going to be available for
redundancy? Is the traffic profile many short-lived flows or long-lived
ones? These availability questions to need be answered. For Cisco NGIPS
specifically, clustering can provide high availability between two NGIPS
devices.
The management platform is another consideration. Is the management

platform going to manage multiple devices? How is it going to be
accessible, and by whom? Is the management software going to be virtual or
an actual appliance? These are some of the decisions you need to make. For
Cisco, the FMC can be deployed in a virtual machine and as an appliance
and supports redundancy, so there is no unmanageable NGIPS situation if
one FMC fails.
The feature requirements needed to enforce the policy must also be

identified. Is malware part of the problem to address? URL filtering, user
discovery, vulnerabilities, application awareness, and control are some
features that Cisco NGIPS supports and that contribute to enforcing the
overall security policy.
A security team should revisit the design considerations when answering all
of the preceding questions in order to cover all the potential holes and
ensure a smooth implementation phase.
After you answer all these questions, you need to check the long list of
information against vendor products, product support, and licensing costs in
order to make a decision. In making a vendor decision, you should also
consider the future. Focusing purely on current requirements might lead to
407
poor choices for years to come. What is more, integrating NGIPS into the
whole network architecture in order to bring the business outcomes desired
is how product selection should be viewed. Just focusing on a cost-effective
piece of equipment with features that will solve security problems today is
not the way to go.
After the vendor selection, a planning document is produced from the

requirements document that will dictate how the deployment will take place,
what features will be used, and in what timeframes. The plan needs to be as
detailed as possible in order for the deployment to go smoothly and for the
NGIPS operation to be efficient and successful.
Implementation and Operation
During the implementation and operation phase, the NGIPS is put in place in
the network and starts inspecting traffic. The operation steps follow the
initial installation and can take quite a bit of time as the process involves
configuration and fine-tuning.
The implementation phase involves the following hardware and software

installations:
Installation of the management platform: This installation happens first

because the management platform needs to be ready to discover the device
to manage and start configuring it. This step involves going through the
initial configuration, giving the device an IP address and a gateway in order
to be reachable.
Specifically for Cisco Firepower NGIPS, the FMC needs to be installed in

the network and configured. Either in hardware (appliance) or software
(virtual machine), the FMC needs to be accessible from the network. If
ASDM is the management software of choice, it can be launched and
installed only after the following installation is done.
Installation of the Firepower appliance, the Firepower Threat

Defense, the virtual appliance, or the Cisco ASA with FirePOWER
Services: This installation involves going through the initial configuration,
giving the device an IP address and a gateway in order to be reachable. If
the device is Cisco ASA with FirePOWER Services, then ASDM can be
launched and installed by establishing an HTTPS session into the firewall’s
408
management IP address.
The initial device configuration and operation includes the following steps:
Step 1. Addition of the NGIPS appliance/module to the management

platform: This step includes establishing connectivity between the
management platform and the device in order to begin managing it.
Step 2. Application of licenses and basic configuration: After establishing

connectivity, the management platform connects to the device to provision
licenses that allow it to operate. Then a basic configuration is placed on the
device, making sure that the policy is not very aggressive if the NGIPS is
installed inline. At this stage, the NGIPS device might also be used in
passive mode to prevent inadvertent packet loss.
Step 3. Tuning: Initially, many of the policies need to be tuned to the needs
of the network. Sometimes, especially in inline deployment, a minimal set of
features is deployed to avoid inadvertent outages due to misconfigurations.
Later, the configuration can be adjusted to gradually take advantage of the
whole set of NGIPS features. After the initial learning phase (specifically
for Cisco), Firepower NGIPS devices offer a number of recommendations
to make sure the policies align with the network condition.
Step 4. Operation: The final step is device operation. After finishing the
tuning of the device and after ensuring a smooth transition, the NGIPS that
was proactively put in passive mode can be converted to inline mode.
Operation is a continuous process that requires proper planning and
organization. Operating the NGIPS and using it to act appropriately or
generate useful reports requires a certain amount of planning and
organization. Operations teams need to be assigned and take their place in
the day-to-day NGIPS operation and support.
Evaluation and Control
The final phase in the deployment lifecycle process is evaluation and

control. That is the phase that verifies all previous steps and serves as
feedback to the policy definition step. Findings and lessons learned from the
evaluation are fed into the policy, which can be adjusted to accommodate
make the environment more secure.
409
Specifically for Cisco Firepower NGIPS, all features that apply to the after
phase in the security model fall under evaluation and control. Some of these
features include:
Snort rule tuning: Snort signature tuning happens initially after NGIPS
implementation.
Signature updates: SourceFire Rule Updates (SRU) take place

continuously in the NGIPS. The updates ensure that there is coverage for the
most recent threats and exploits.
Firepower recommendations: The FMC uses host profile information to

make recommendations about the rules that should apply to your
environment. It can associate the host, OS, and applications with the rules
that apply to them. It also revisits the rules that are already applied in the
system. The Firepower recommendations should be used continuously to
improve the security of the system.
Vulnerability scans: These scans should be leveraged in Cisco NGIPS

occasionally in order to identify vulnerable devices and patch them.
Periodically finding vulnerable hosts helps prioritize and keep the system
up-to-date.
When the system identifies an incident, investigation needs to take place to

mitigate it and find the root cause. Analytics and NGIPS reports can be used
to investigate the incident. After the root cause is identified and addressed,
lessons learned should be collected in order to update the security policy. If
misconfiguration or issues were responsible, then the NGIPS policy also
needs to be updated.
Obviously, NGIPS deployment is not finished as soon as the equipment is

installed. It is an iterative process that involves ensuring that the security
policy and the NGIPS are up-to-date and proved the best protections
possible.
Summary
As you have seen in this chapter, if IPS was important for the security of
legacy networks, NGIPS is essential in today’s security landscape. Features
such as application and contextual awareness, file control, and intelligence
410
correlation can reduce complexity and increase the security of a modern
infrastructure.
Specifically for Cisco, NGIPS is available in the ASA with FirePOWER

Services, with Firepower Threat Defense, and also as a standalone virtual
or physical appliance. There are multiple deployment options to fit different
customer needs, depending on the deployment use case and location. When
designing the deployment of NGIPS, network architects need to consider
various factors, including system capabilities, traffic flow, and scale and
availability. The deployment process is not a one-and-done step. It is an
iterative process of defining the security policy, choosing products, and
planning, operating, and evaluating the efficacy of the system.
411
Chapter 11. Configuring Cisco Next-
Generation IPS
Policy
Snort rules
Performance settings
Stack/cluster
You learned in Chapter 10, “Introduction to and Deployment of Cisco Next-

Generation IPS,” how security architects can use next-generation intrusion
prevention systems (NGIPS) in modern networks. A simple and efficient
configuration interface allows administrators to use a wealth of NGIPS
functions easily. The Cisco NGIPS product is not only properly architected
to offer the best functionality in the industry but also comes with an intuitive
management platform, the Firepower Management Center (FMC).
This chapter introduces the configuration options available in the FMC. It

describes policy configuration options, IPS rules, Snort, and NGIPS
preprocessors. Finally, it goes over performance settings as well as stack
and cluster configuration.
Note
You can also use Adaptive Security Device Manager (ASDM) with
FirePOWER services and Firepower Threat Defense (FTD) to configure
NGIPS features in Cisco ASA with FirePOWER Services. ASDM is
presented in Chapter 4, “Troubleshooting Cisco ASA with FirePOWER
Services and Firepower Threat Defense (FTD).”
Policy
In Cisco Firepower NGIPS, an IPS policy consists of a set of settings that
412
control the features available in Cisco NGIPS products. The FMC is built to
efficiently manage all the features and allow security engineers to leverage
the tools at their disposal in a simple and consistent manner. As NGIPS
features keep growing, the management interface adds extra functionality but
keeps complexity for administrators to a minimum.
Note
Cisco ASA with FirePOWER Services, Firepower Threat Defense and

Cisco NGIPS appliances (after version 5.4) have the capability to locally
manage SSL/TLS communications and decrypt the traffic before applying
attack, application, and malware detection policies. SSL decryption can be
used in passive and active mode and supports HTTPS- and StartTLS-based
protocols like SMTPS and FTPS. Thus, the NGIPS policy configuration
options presented in the following sections can also be applied to encrypted
traffic that is first processed by the SSL decryption engine.
Policy Layers
An intrusion policy in Cisco NGIPS consists of the base policy and a set of
other policies that customize the base policy. These policies are applied to
the system in a layered order as the overall intrusion policy (see Figure 11-
1).
413
Figure 11-1 NGIPS Layered Approach
In FMC, you can see the policy layers by going into a policy and editing the
Policy Layers settings (see Figure 11-2). The base policy is the bottom
policy and contains a summary of the rules in it. The Policy Layer page has
multiple options to edit or reorder the policy layers in the IPS.
Figure 11-2 A Layered NGIPS Policy Configuration
Variables
Variables are used in multiple locations in Cisco Firepower NGIPS. IPS

rules use preconfigured variables representing networks and ports. For
example, the inside (protected) network is represented by the variable
$HOME_NET, and the outside (unprotected) network is represented by the
414
variable $EXTERNAL_NET. Other variables are used in more specialized
rules. For example, $HTTP_SERVERS represents the web servers and
$HTTP_PORTS the ports used by these servers.
There are two types of variables:
System default variables that are the preconfigured variables in the

system: These include $AIM_SERVERS, $DNS_SERVERS,
$EXTERNAL_NET, $FILE_DATA_PORTS, $GTP_PORTS,
$HOME_NET, $HTTP_PORTS, $HTTP_SERVERS, $ORACLE_PORTS,
$SHELLCODE_PORTS, and more.
Policy variables that override default variable: They are used in

specific policies.
You can manage variables can in the FMC’s Variable Set section of the
Objects tab. Here you can edit or create the default and other variable sets
to be used in an IPS policy.
If you click the Add Variable Set button shown in Figure 11-2, you get the
screen shown in Figure 11-3, where you can create new network or port
variables and assign them to the default or policy-specific (customized)
variable sets used in an IPS policy, as shown in Figure 11-4.
Figure 11-3 Variable Sets in FMC’s Objects Screen
415
Figure 11-4 Creating New Variable Sets in FMC
When creating a network variable, you can use more than one address; just
separate addresses with commas—for example, [192.168.1.2, 10.10.10.2,
172.18.1.2]. You can also use CIDR representation—for example,
[192.168.1.2, 10.10.10.2, 172.18.1.0/24]. In addition, you can exclude
addresses from a list by using an exclamation point—for example,
[192.168.1.2, !10.10.10.2, 172.18.1.0/24].
When creating port variables, you can use ranges, such as [25-121]. The
following are some other possibilities:
For ports less than a number, you can use this format: [-1024].
For ports more than a number, you can use this format: [1024-].
To exclude ports, you can use this format: [!25].
To list ports, you can use this format: [25, !21, 80-].
416
When you accurately define variables, the processing of the rules using them
is optimized and the right systems are monitored for illegitimate traffic. By
leveraging variables, you can more efficiently change the variable value
without changing all the rules for which that variable is used. For example,
if multiple rules are defined to protect the web servers, you would need
only to define or update variable $HTTP_SERVERS instead of updating all
the rules.
Configuring a Cisco Firepower Intrusion Policy
A Cisco Firepower intrusion policy is configured in the IPS Policy tab in

the FMC (see Figure 11-5). A policy is applied in an access control policy,
which in turn is enforced in the Cisco Firepower system. This section
assumes that the NGIPS system interfaces are already configured and the
access policy that will use an IPS policy for inspection is set with an Allow
action, as shown in Figure 11-6. (Other actions cannot be used with IPS
policies.) Depending on the software version of the system, the policies in
the intrusion policy could be in the Access Control dropdown instead of in a
separate Intrusion dropdown.
Figure 11-5 IPS Policy Configuration
417
Figure 11-6 Allow Action Used in an Access Policy That Will Leverage an
IPS Policy
You can click the Create Policy button to create a new policy. The next
prompt, shown in Figure 11-7, allows you to set a name, a description,
whether to drop and trigger an event when deployed inline and a rule with
an action of Drop and Generate Event is matched, and the default policy
used as a base policy.
Figure 11-7 New Policy
The default intrusion policies are policies that exist in the system by default
and can be used as starting points for new configurations. These are the
available default intrusion policies:
Balanced Security and Connectivity: This policy is built for both speed
418
and detection. It serves as a good starting point for most organizations and
deployments.
Connectivity over Security: This policy is for organizations where

connectivity takes precedence over network infrastructure security. It
enables far fewer rules than does the Security over Connectivity policy.
Maximum Detection: This policy is built to encompass a selection of

critical recent vulnerabilities with CVSS scores of at least 7.5. This policy
favors detection over throughput.
No Rules Active: This policy has all rules and preprocessors disabled. It
is used when an administrator chooses to create a policy from scratch. This
is not true for FirePOWER version 5.4 and later, where all preprocessors
have been abstracted out of an IPS policy and are configured in the network
analysis policy.
Security over Connectivity: This policy is built for organizations where

security takes precedence over user convenience. This policy could
generate false positives and disruptions when first deployed.
A newly deployed Firepower system comes with two custom default

policies provided by Cisco: Initial Inline (see Figure 11-8) and Initial
Passive. They are not default policies applied by default.
Figure 11-8 Default Inline Policy
After you create a policy, it appears in the Policy Information section in the
IPS Policy tab, as shown in Figure 11-9.
419
Figure 11-9 Policy Information
When using a default policy as the base policy, an administrator can edit the
base policy (using the Manage Base Policy option) and choose whether to
allow rule updates to modify the base policy. Note that rule updates change
rules, preprocessor rules, and default policy settings for rules that have not
been customized by the administrator.
The rules deployed by the default policy in use can be edited by using the
Rules option in the Policy Information section. When you’re editing a rule, it
appears in the My Changes section of the Policy Information. You’ll learn
more about editing and creating IPS rules later in this chapter.
Committing a Policy
The preceding sections explain how to configure various aspects of an IPS

policy. After all the changes have been made, the policy doesn’t take effect
unless it is committed. When you click the Commit Changes button (refer to
Figure 11-8), you might be prompted to insert a comment that describes the
change. The comment is a configurable option under the intrusion policy
preferences. Comments are stored in the audit logs and thus are searchable.
Alternatively, you can choose to discard the changes, in which case you
remove the changes since the last commit. Finally, if you choose to leave the
Intrusion Policy screen with uncommitted changes, the changes are not lost.
They remain uncommitted and can be revisited later to be committed or
discarded.
After a policy is committed, Firepower performs a validation check to make

sure there are no incorrect or invalid settings. For example, enabling a rule
420
that uses a disabled preprocessor would be flagged after the commit. For
version 5.4 and later, the preprocessor check does not happen.
The committed policy configuration or changes further need to be applied to

an access control policy (see Figure 11-10).
Figure 11-10 IPS Policy Applied in the Inspection Tab of a Rule in the
Access Control Policy
The access control policy that contains the IPS policy is then applied to a
device in the Targets tab of the policy, as shown in Figure 11-11.
Figure 11-11 Applying an Access Control Policy to a Device
Snort Rules
The core of Cisco Firepower system’s IPS capability is the IPS rule base
and the detection engine, which includes preprocessors. When a Cisco
421
NGIPS is booted, the engine is initialized, the rule structures are initialized,
and then traffic is matched against the rules.
The Cisco Firepower NGIPS engine is based on Snort. Snort is an open

source IPS tool, originally created by SourceFire, that is widely used in the
industry. Snort identifies malicious traffic that is subjected to deep
inspection according to the enabled rules in the IPS policy.
A rule defines a set of keywords and options to match against in order to

identify security policy violations, known network attack patterns, and other
malicious activity. The IPS engine matches packets against the criteria
specified in each rule, and if a rule is matched, the rule action field is
triggered. For example, if a rule matches on an exploit with the action Drop,
the offending packet is dropped. After the offending packet is dropped, the
flow is blacklisted, and no new packets from the flow are passed.
During initialization, the Firepower NGIPS engine groups rules into sets on
Snort rule headers and options properties. These sets are organized so that
the rule options for all the rules with common unique characteristics are
listed together.
A malicious packet could possibly match more than one rule and trigger
event. As rule options are matched, events are queued until all options are
processed. The final selection of the event triggered is chosen based on the
following criteria:
Event processing order is considered.
Rules generating events supersede those set to Drop and Generate.
Content-matching events supersede anomaly detection events.
Protocol content events supersede generic content events.
Longer content length matches supersede shorter content matches.
The events are sent from the NGIPS device to FMC, and they are stored in
the database of all intrusion events and can be queried later.
Rule Anatomy
422
Snort uses a simple and flexible description language that is powerful for
defining the indicators that the IPS policy should be matching against.
Although most Snort rules are written in a single line, you can have rules
span multiple lines by adding a backslash (\) to the end of each line, as in
this example:
alert top $EXTERNAL_NET any -> HTTPS_SERVERS $HTTPS_PORTS

\
(msg: "Example rule"; flow: to_server, established; \
uricontent: "cgi/test/mal.exe"; reference: cve-1991-1345; \
classtype: web-application-activity; sid: 9991; rev:1;)
A Snort rule has two sections: a header and a body. The header contains the
action, protocol, source, and destination IP addresses and netmasks, as well
as the source and destination port. The body contains keywords that define
the criteria to trigger an alert. The body keywords contain event messages,
patterns in the payload to match, and specifications of which parts of the
packet to match on. In the preceding rule, this is the header:
alert top $EXTERNAL_NET any -> HTTPS_SERVERS

$HTTPS_PORTS
And this is the body:

As you can see, the rule content is included in parentheses. The keywords
are separated by semicolons.
In the FMC, all IPS policy rules are available in a policy under Policy
Information (see Figure 11-12). Rules are grouped based on categories.
Multiple other rule classification options can be used to look through the
rules. For example, you can view the rules according to the rule
423
configuration in order to match on the rule state. Using the Rule Content
option allows you to view the rules based on the matched content. The
Platform Specific option allows you to look for rules based on the platform
of interest. Many more options are available.
Figure 11-12 IPS Policy Rules
The following sections provide more information of the anatomy and the
details of rules.
Rule Headers
In the previous rule example, this is the header:
alert tcp $EXTERNAL_NET any -> HTTPS_SERVERS

$HTTPS_PORTS
As you can see, these are the header options:
alert: Generates an event when triggered. Other options are pass,

generate events, drop and generate event, and disabled.
tcp: Matches TCP traffic only. Other protocols are udp, icmp, and ip.
424
$EXTERNAL_NET: Matches traffic from any host that is not on the
internal network.
any: Matches traffic sent to any destination.
-> : Matches external traffic destined for the TLS servers on the network.
A bidirectional operator <> is also available.
$HTTPS_SERVERS: Matches traffic to be delivered to TLS servers.
$HTTPS_PORTS: Matches TLS port traffic.
You can access Snort rules in the FMC by selecting Policies > Intrusion >
Intrusion Policy > Rule Editor (shown later, in Figure 11-16). Figure 11-
13 shows how an IPS rule header is accessible and editable in the rule
editor. You can see all the header options and how they can be configured
according to the rule author’s needs.
Figure 11-13 Editing a Snort Rule’s Header Fields
Note
The Classification field is from the rule body and belongs in the classtype
Snort option.
Rule Body
425
The body of a rule looks like this:

The flow value can be set to_client, to_server, from_client, or

from_server, based on who initiates the connection. flow can also be set to
established, stateless, no_stream, or only stream based on the type of
connection.
Content rules contain the content keyword. More than one content
condition can exist in a rule. content can use an offset and a depth for
where and how long to match in the packet.
sid is a unique Snort identifier. rev is the revision of the rule.
A flags keyword can be used to match on the TCP flags of the packet.
Another option that can be added to the rule is metadata that signifies the
service the rule is matching on. It can also affect impact_flag. metadata is
not necessarily a required match. Until the service is identified for a flow or
until there is not a service identified, the IPS falls back to ports to identify a
service. If the service is identified, the ports the traffic traverses from are
ignored.
Other options are file_data to match on HTTP or email response data,

detection_filter to define the rate that must be exceeded by a source or
destination host before a rule can generate, fast_pattern to define patterns
that qualify for further inspection, flowbits for tags to be used in subsequent
rules, and byte_jump, byte_test, and byte_extract to extract and test
through certain bytes in the packet payload.
Figure 11-14 shows the rule’s body options as they appear when editing a
rule in rule editor. You can change the option order in the rule. Also, you
can add more options to match different packet fields.
426
Figure 11-14 Editing a Snort Rule’s Body
Writing a Rule
The process of authoring a rule is not complicated:
Step 1. Clearly identify the problem that requires a rule. If the issue is a
security vulnerability, for example, then that malicious indicator of
compromise needs to be written to alert on exploit attempts.
Step 2. Capture the offending traffic in question by using packet captures.
Step 3. Look into the captured traffic to identify common characteristics,

such as ports, protocols, and source or destinations.
427
Step 4. Identify unique characteristics in the traffic. For example, are you
looking for a specific pattern in the packet payload?
Step 5. After completing the analysis, write a rule in the FMC that satisfy
all the criteria defined in the previous steps.
Step 6. Push the rule to the IPS and, after generating the offending traffic,
make sure the rule operates as expected.
Because Snort is an open source language, custom rules can be written by

anyone and reused in the Firepower NGIPS configuration. Cisco Firepower
can use third-party rules. You can import them by clicking the Import button
in the Rule Updates tab in the FMC (see Figure 11-15).
Figure 11-15 Importing Snort Rules in the FMC
You can further use and edit the imported rules in the layered IPS policy.
You can configure the Rule Update function to perform periodic updates of
Cisco-authored SourceFire Rule Updates (SRU) from an external location
(feed).
Managing Snort Rules in FMC
You can access and manage Snort rules in an IPS policy in the FMC by
using Policies > Intrusion > Intrusion Policy > Rule Editor, as shown in
428
Figure 11-16, or in an intrusion policy found under Policy > Access
Control > Intrusion in versions 5.4 and later.
Figure 11-16 Policies > Intrusion > Intrusion Policy > Rule Editor
Figure 11-17 shows the rules as they appear in the IPS policy editor.
Figure 11-17 Snort Rules in an IPS Policy in the FMC
To view the rules in another layer of an IPS policy, you can use the Policy
dropdown, as shown in Figure 11-18.
Figure 11-18 IPS Policy Dropdown
The rule options bar, shown in Figure 11-19, allows you to set various
429
options to multiple rules at the same time. For example, you can set
comments or alerts, change the temporary state, or filter rules.
Figure 11-19 Rule Options Bar
Other rule management capabilities the FMC offers are rule filtering with
the filter bar, rule grouping with the rule grouping accordion, rule querying,
setting of rule state, event filtering to limit the events triggered based on
certain criteria, setting of dynamic state to rate limit the events triggered,
alerting (SNMP), and comments.
You can see that the FMC allows for fine-grained and efficient management
of all IPS rules used in Cisco NGIPS devices.
Cisco NGIPS Preprocessors
IPS pattern matching is almost impossible because of the different protocols

and their intricacies. For example, matching a file pattern in SMTP email
traffic is not performed the same way as matching it when flowing through
HTTP with compression enabled. For that reason, the Cisco NGIPS offers a
variety of preprocessors that normalize traffic so that it can be matched
against the defined Snort rules.
The preprocessors attempt to make the streams of packets as much as

possible like the reassembled packets that will be seen by the endpoints
receiving them. For example, the preprocessors perform checksum
calculation, stream and fragment reassembly, stateful inspection, and more.
Each preprocessor has a variety of settings to be configured in order to
minimize false positives and false negatives. In addition, customized ones
perform dedicated resources to detect specific suspicious attack activity to
avoid burdening the system with these tasks.
The following preprocessors are available in the Cisco Firepower NGIPS:
DCE/RPC: The DCE/RPC preprocessor monitors DCE/RPC and SMB

protocol streams and messages for anomalous behavior or evasions.
DNS: The DNS preprocessor inspects DNS responses for overflow
430
attempts and for obsolete and experimental DNS record types.
FTP and Telnet: The FTP and Telnet preprocessor normalizes FTP and
Telnet streams before they are passed to the IPS engine. It requires TCP
stream preprocessing.
HTTP: The HTTP preprocessor normalizes HTTP requests and responses

for IPS processing, separates HTTP messages to improve IPS rule
performance, and detects URI-encoding attacks.
Sun RPC: The Sun RPC preprocessor normalizes and reassembles

fragmented SunRPC records so the rules engine can process the complete
record.
SIP: The SIP preprocessor normalizes and inspects SIP messages to

extract the SIP header and body for further rule processing and generates
events when identifying out-of-order calls and SIP message anomalies.
GTP: The GTP preprocessor normalizes General Service Packet Radio

(GPRS) Tunneling Protocol (GTP) command channel signaling messages
and sends them to the rules engine for inspection.
IMAP and POP: The IMAP and POP preprocessors monitor server-to-
client email traffic and alert on anomalies. They also extract and decode
email attachments and allow further processing by the NGIPS rules engine
and other Cisco Firepower features.
SMTP: The SMTP preprocessor inspects SMTP traffic for anomalous

behavior and extracts and decodes email attachment for further processing.
SSH: The SSH preprocessor detects SSH buffer overflow attempts and
monitors for illegal SSH versions.
SSL: The SSL preprocessor monitors the SSL handshake transactions.

After the SSL session is encrypted, the SSL preprocessor stops inspecting. It
requires TCP stream preprocessing. The SSL preprocessor can reduce the
amount of false positives and save detection resources from the IPS system.
SCADA: There are two supervisory control and data acquisition

(SCADA) protocols for which the Cisco Firepower NGIPS offers
preprocessors: DNP3 and Modbus. These protocols monitor and control
431
industrial facilities. The SCADA preprocessors monitor the DNP and
Modbus protocols for anomalies and decode their messages for further rule
inspection.
Network: Multiple network and transport layer preprocessors detect

attacks exploiting the following:
Checksum verification
Ignoring VLAN headers
Inline normalization
IP defragmentation
Packet decoding
TCP stream
UDP stream
The packet decoder normalizes packet headers and payloads for further
processing. The inline normalization preprocessor normalizes traffic to
prevent evasion techniques in inline deployments. The rest of the network
preprocessors detect anomalous network or transport layer behavior.
Threat detection: The threat detection preprocessors detect specific

threats and include the following:
Back Orifice Detection
Portscan Detection
Rate-Based Attack Prevention
Sensitive Data Detection
The FMC offers a wealth of settings for each preprocessor that are
available in the IPS policy Advanced Settings view. Rules can also be
viewed based on the preprocessor they are using (see Figure 11-20). For
version 5.4 and later, the rules can be edited under Policy > Access Control
> Intrusion.
432
Figure 11-20 Rules View Categorized by Preprocessor
Firepower Recommendations
Firepower can offer recommendations about rules that apply to the

operating systems and the server and client applications detected by the
system. When you configure the Recommendations feature, Firepower
searches through the base policy to find the rules that protect against
vulnerabilities that have been identified for the discovered assets.
Based on the base policy rules, the system identifies the states in the policy
and proposes new states. It optionally can automatically set the rules to the
recommended settings. The rules that are disabled or that generate events
and apply to the vulnerabilities discovered are set to generate events; the
rules that drop and generate events and protect the assets are set to drop and
generate events. Finally, the rules that do not protect identified assets are
disabled. The proposed changes can be for rules and preprocessor settings
as well. You can also automate generation of recommendations by using task
schedules.
You can enable the Recommendations feature under IPS Policy Information
as shown in Figure 11-21. In versions 5.4 and later, the Recommendations
feature is set via Policy > Access Control > Intrusion Policy. There are
two options: one to generate and preview the recommendations and the
other to generate and use the recommendations. When generating
recommendations, the system displays filtered views of the rules
recommended to be set to Generate Events, Drop and Generate Events, or
433
Disable. After previewing the recommendations, you can manually set the
recommended options. Rules that have been set manually are not updated by
the Recommendations feature. After using the proposed changes, Firepower
adds a read-only Recommendations layer to the intrusion policy. Choosing
not to use recommended rule states removes the layer.
Figure 11-21 Firepower Rule Recommendations
The FMC also provides advanced settings in the Recommendations

configuration. If the advanced settings are not used, the system applies all
the recommendations to all the hosts in the system. When using the advanced
settings, you can define which hosts (networks) on the network are
monitored for vulnerabilities in order to provide recommendations. That
influences which rules are recommended based on rule overhead and which
are disabled.
In Firepower, each rule is categorized based on the rule’s potential

overhead introduced to the system: none, low, medium, high, or very high. In
the advanced settings, you can choose the overhead level that is taken into
consideration when making rule recommendations. For example, when you
set medium overhead in the advanced settings, the system makes
recommendations based on all rules with an overhead rating of none, low,
or medium and does not make any recommendations for rules with high or
very high overhead.
434
You can improve performance of a Cisco NGIPS sensor by leveraging some
performance settings in the advanced policy configuration. In version 5.4
and later, the performance settings are in the advanced settings, under Policy
> Access Control > Intrusion:
Event Queue Configuration: You can set the Event Policy configuration
in the Advanced tab when editing an access control policy. You can set the
maximum packet states per packet and disable content checks that will be
inserted through the stream reassembly process (see Figure 11-22).
Figure 11-22 Event Queue Configuration
Latency-Based Packet Thresholding: Many applications are not tolerant

of latency. For example, high-frequency-trading traffic has a very low
latency requirement. The IPS operations, especially when processing
through rules and preprocessors, can introduce latency to the streams. In
cases where latency is an issue, latency-based packet thresholding can be
used (see Figure 11-23). Packet latency thresholding measures the total time
taken to process a packet by IPS decoders, preprocessors, and rules, and it
stops inspection if the processing time exceeds the configured threshold. For
more accuracy, packet latency thresholding measures elapsed time from the
time the packets enters the decoder; it does not measure processing time. It
is obvious that when used, latency packet thresholding can let attacks pass
when the threshold is met and traffic is allowed through uninspected. The
options are set in the Advanced tab when editing an access control policy in
the FMC.
435
Figure 11-23 Latency-Based Packet Thresholding
Latency-Based Rule Thresholding: Latency-based rule thresholding is

also set in the advanced settings of the IPS policy or under Policy > Access
Control > Intrusion in version 5.4 and later. It measures and enforces a
maximum processing time of packets through a rule. If a rule takes more
time than the threshold specifies, a counter gets incremented, and when the
counter reaches a limit, the rule is suspended for a specified period and an
alert is triggered (see Figure 11-24). Latency rule thresholding is a
software-based latency implementation that does not enforce strict timing.
Latency rule thresholding could, of course, let attacks pass while the rule is
disabled.
Figure 11-24 Latency-Based Rule Handling
Performance Statistics Configuration: The Cisco Firepower IPS

maintains statistics In the IPS policy advanced settings, to alleviate
processing load, you can set the intervals at which the performance statistics
of the device are updated. These intervals are in seconds and number of
packets analyzed.
Regular Expression Limits: Perl Compatible Regular Expressions

(PCRE) are often used in Snort rules to match on packet payloads. Regular
436
expression processing can add processing load to a device. The default
regular expression match and recursion limits can be overridden in the
Regular Expression Limits setting in the advanced settings of an IPS policy.
Increasing the default limits could improve security but could also degrade
the performance of the device.
Event Logging Limits: A packet could be matched against more than one
IPS rules that generate events. When more than one events are generated by
a packet, they are placed in the event queue, and the top events are logged
by the device. The rule processing configuration can be set in the Advanced
tab when editing a policy access control and allows you to set the queue
size, the number of top events to be logged, and how the events are
prioritized in the queue, as illustrated in Figure 11-25.
Figure 11-25 Event Logging Limits
The advanced settings also allow you to set a global threshold (see Figure
11-26) to manage the number of events generated by each rule over a period
of time. When you’re using the global threshold, that threshold applies to all
rules that do not have an overriding specific threshold set.
Figure 11-26 Global Rule Threshold
Stack/Cluster
As described in Chapter 10, Firepower NGIPS offers stacking of multiple

devices that can offer much higher IPS throughput and clustering that allows
437
for redundancy. Both options can be configured in the FMC’s Devices tab.
Clicking Add brings up cluster and stack options, as shown in Figure 11-27.
For either feature, more devices must be managed in the FMC in order to be
configured.
Figure 11-27 Stack and Cluster Dropdown in the FMC’s Devices Tab
Refer to Chapter 10 for more information on clustering and stacking.
Summary
As you have seen in this chapter, Cisco NGIPS products can be fully
managed using the FMC. You have seen how IPS policies can be configured
and customized for each network’s needs. In this chapter you also learned
about Snort rules and how to write new ones. You have also learned how
preprocessors are used for more efficient protocol processing in the system.
You have also seen the intelligent recommendations Cisco NGIPS can offer
for more efficient configuration and how to configure redundancy and
stacking.
ASDM is another management platform specifically for Cisco ASA with

SourceFire Services. It is covered in Chapter 12, “Reporting and
Troubleshooting with Cisco Next-Generation IPS.”
438
Chapter 12. Reporting and Troubleshooting
with Cisco Next-Generation IPS
Analysis of IPS-related events that can help an administrator analyze

malicious or suspicious activity identified by next-generation intrusion
prevention systems (NGIPS)
Troubleshooting and monitoring of an NGIPS to ensure that it is

functioning properly
This chapter discusses the reporting and troubleshooting capabilities of

Cisco NGIPS. As discussed in previous chapters, a Cisco NGIPS offers a
wealth of intrusion prevention techniques that can be configured using the
Firepower Management Center (FMC). The events and IPS activities taking
place in an NGIPS are collected in the FMC logs that are available for
analysis. This chapter describes basic NGIPS analysis you can perform to
assess the security of an environment. In addition, when a system is facing
issues, an administrator can use troubleshooting tools in the FMC to
investigate the health and problems of the system.
Analysis
The FMC provides robust reporting capabilities that can help administrators
investigate intrusions, indicators, or compromise and suspicious activity
identified by NGIPS. An intrusion policy that is tied to an access control
policy by default generates a log in the FMC at the end of every connection
that triggers an IPS event. That log is unrelated to any IPS logging actions
generated in the rule. When a possible intrusion or malicious activity is
identified, an intrusion event is triggered that records the date, the time, the
type of exploit, as well as contextual information about the source of the
attack and its target. IPS rules generate connection events according to their
configured default action. When a rule generates an event, the system does
not automatically generate a connection event at the end of the connection
that triggered the rule unless it is configured in the default action. These logs
can further be used in the analysis. Any sort of connection analysis requires
connection log collection on the FMC.
439
The FMC can help an investigator look into the NGIPS-collected data with
a variety of tools:
Event information and statistics
Time-based reports
Alerting
Incident handling
Workflows
Correlation policies
Intrusion Events
You can use the FMC to view, review, search, and analyze intrusion events
in the FMC. Overview > Summary offers an Intrusion menu that provides a
summary of the intrusion events identified by the NGIPS (see Figure 12-1).
You can adjust the time interval the events refer to by using the time range
link at the top right of the page.
Figure 12-1 Intrusion Event Summary Dropdown
There are three options to review in the Intrusion menu:
Intrusion Event Statistics
Intrusion Event Performance
Intrusion Event Graphs
440
By selecting Intrusion Event Statistics, you can see a summary of the
intrusion events triggered, as shown in Figure 12-2.
Figure 12-2 Intrusion Event Statistics
As shown in Figure 12-2, the Intrusion Event Statistics page includes the
following:
Host statistics, with information about the NGIPS and FMC
An event overview, with information about the total events in the event
database that stores the events triggered within the time interval
Event statistics, with details about the event database, such as the most
heavily triggered events, the zones that trigger most events, and the NGIPS
that generate them
Selecting Intrusion Event Performance brings up the Intrusion Event

Performance page, shown in Figure 12-3. This page allows you to generate
graphs with performance statistics over time, intrusion events per second,
blocked packets, bytes per packet, and more.
441
Figure 12-3 Intrusion Event Performance
Selecting Intrusion Event Graphs brings up the Intrusion Event Graphs page,
shown on Figure 12-4. This page allows you to plot the intrusion events
generated over time. You can filter the events based on NGIPS, destination
ports, addresses, messages, and time. The end result is a graph that shows
how the events trend over time and which intrusion events were most
prevalent.
Figure 12-4 Intrusion Event Graph
For more detailed analysis of the event information, FMC offers the
Analysis tab, which provides an Intrusions dropdown, as shown in Figure
12-5.
Figure 12-5 Analysis > Intrusions in the FMC
442
The Events default workflow, shown in Figure 12-6, shows the events
triggered by the system in a specific time frame. The time can be adjusted
using the time range link at the top right of the page. The Jump To dropdown
allows you to go to various event types. Specific buttons also allow you to
view, copy, delete, or download the packets that triggered the events. If you
are certain that an event was not malicious, you can mark it as Reviewed to
move it to the reviewed events.
Figure 12-6 Events Workflow
You can see the reviewed events can by selecting Intrusions > Reviewed
Events (refer to Figure 12-5). From the Reviewed Events page you can
view, unreview, copy, delete, or download the packets that triggered the
event.
You can further investigate the events shown in the Events page by
associating them with logged connections, if any. To do this, you click the
link of the event message name, as shown in Figure 12-7. This way, you can
view the actual flows that generated the events.
443
Figure 12-7 Events in Relation to Connections
You can search events by selecting Analysis > Search. You can save the
search options in the Events or Reviewed Events workflows and then
revisit them later by clicking the Search button in the workflow. The custom
search page, shown in Figure 12-8, allows you to save various search
criteria so that you can rerun a particular search.
Figure 12-8 Custom Intrusion Event Search
You can load a saved search from the save search panel on the left of the
Analysis > Search page, which shows all the saved searches. After you
load a particular search, you can run it and find the results at Analysis >
Events.
You can use the search results on the Events page to generate new reports.
Suppose you have one or more events in the Events page. You can copy
them by using the Copy button (refer to Figure 12-6). Those events are then
stored in the Clipboard, and you can view them by selecting Intrusions >
Events > Clipboard, as shown in Figure 12-9.
444
Figure 12-9 Intrusions > Events > Clipboard
You can use the events in the Clipboard to generate reports, as shown in
Figure 12-10. You have two available options: generate a report for only the
checked events or generate a report for all the events.
Figure 12-10 Generating Event Reports
When you generate a report, the next screen is Report Templates, shown in
Figure 12-11. Here you can choose from the available report options and
generate the report. You can then run the report immediately or save it to be
run later. There are three report formats available in FMC: PDF, HTML,
and CSV.
445
Figure 12-11 Report Template
The reports can be stored and reviewed from the Overview tab. The
following section provides more information on reports.
Intrusion Event Workflows
A workflow, like the event workflow shown earlier, is a series of data

pages in the FMC that you can use to evaluate events generated by the
managed NGIPS devices. As shown previously, the FMC provides
predefined event workflows that can be used for analysis of the events in the
event database. You can edit the default event workflow shown in the
Events page along with other workflows by selecting Admin > User
Preferences > Event View Settings, as shown in Figure 12-12.
Figure 12-12 Event View Settings
A workflow consists of table views, detail pages, graphs, and final pages.
446
You can change the intrusion event workflow used in the Event View
Settings page with the Switch Workflow link, as shown in Figure 12-13.
You can then view events based on the pages and tables in the predefined
workflow chosen.
Figure 12-13 Predefined Workflows Dropdown
Some of these predefined workflows group events based on destination

ports, destinations, impact, and priority and source or destination addresses,
based on event-specific criteria or IP criteria.
If the predefined workflows are not satisfactory, you can create custom
workflows by selecting Analysis > Custom > Custom Workflows (see
Figure 12-14).
Figure 12-14 Custom Workflows Dropdown
When creating custom workflows, you must do the following:
Step 1. Select a source table.
447
Step 2. Define a workflow name.
Step 3. Add pages to the workflow. You can customize pages based on the
columns that should be present in the page (see Figure 12-15).
Figure 12-15 Editing a Custom Workflow
You can export a custom workflow from an NGIPS device and reuse it in
another one by clicking the Export icon in the Custom Workflows page or by
selecting System > Tools > Import/Export.
Reports
Cisco FMC can provide multilevel reports with event views and
dashboards that can help you identify potential security threats and monitor
security. It also supports custom reports. An FMC report is in PDF, HTML,
or CSV format. A default report template defines the data searches and
formats for the report sections. It also defines the sections, the source
database with the content, and the presentation format. You can build custom
report templates by using a powerful template designer. Reports can be
exported and imported so they can be reused within the FMC. Input
parameters can be imported in a report to expand its usefulness.
You can adjust the default template available in the FMC to include new or
remove existing sections. In order to create a template, you first need to go
to the Events page (see Figure 12-16) and navigate in the events so that only
interesting events are included in the viewer. Then you click Report
448
Designer, highlighted in Figure 12-16. You can also create event reports by
selecting Overview > Reporting > Report Templates and using saved
searches.
Figure 12-16 Report Designer Option in the Events Page
Figure 12-17 shows the first sections of the report template built from the
intrusion event workflow. You can set a report title, delete any unwanted
sections, adjust titles and formats of sections, change settings of section
fields, add page breaks and text, and add tables of contents and cover pages
through the advanced settings. Then you can save the template.
Figure 12-17 Report Template
You can also export a report template, by clicking the Import button to
import a previously exported template.
When you complete the report design, you can generate it by using the
Generate button. The Generation popup page allows you to set the report
name, the global timeframe that will be applied to all sections in the report,
and the format (PDF, CMV, or HTML). If input parameters are used in the
report, then the generation process prompts for these parameters. For
example, Figure 12-18 demonstrates setting the report template in a report.
449
Figure 12-18 Report Scheduling
You can also schedule reports to run at later time from the task scheduler
available at System > Tools > Scheduling > Add Task. You can schedule
the tasks to run once or to recur at certain times. A status email can be sent
to the administrator to confirm report completion.
Finally, the Reports tab, available at Overview > Reports, includes all the
previously run reports. You can download or delete any of the stored report
files.
Incidents
An incident is a violation of a security policy. Certain events could be

considered incidents for one environment and normal behavior for others.
For example, port scanning activity could be part of a monitoring system
and would therefore not need to be flagged as malicious. Other events, like
a compromised host exfiltrating Social Security numbers, should definitely
be flagged as an incident to be investigated. It is up to the system
administrator to define what suspicious behavior constitutes an incident and
what security options are available.
In order for an organization to respond to incidents appropriately, it needs to

be properly prepared and organized for incident response. After a defined
incident is observed, a system should notify the administrator, who then
starts the investigation process. A communication plan needs to be in place
in order to inform the parties involved. The next step is containment and
remediation of the threat. Finally, a debriefing process identifies the lessons
learned from the incident.
450
The Cisco FMC by default supports and can alert based on the following
type of incidents:
Compromise of system integrity
Damage
Denial of service
Hoax
Intrusion
Theft
Unauthorized administrative access
Unknown
Website defacement
In order to create an incident in the FMC, you go to Analysis > Intrusions >
Incidents (see Figure 12-19). If there are stored events in the Clipboard,
when creating a new Incident, the clipboard events show in clipboard table
in order to be added to the incident if necessary. As with any other report,
incident reports can be run and generated on the fly in HTML, PDF, or CSV.
451
Figure 12-19 Incident Creation
While you are at Analysis > Intrusions > Incidents, you can create new
incident types other than the predefined ones while creating a new incident
and by editing the incident type field.
You can run a report on a defined incident by using the Generate Report
button shown in Figure 12-20. You can also schedule incident reports.
452
Figure 12-20 Incident Report Generation Button
Alerts
Although the FMC can provide various types of analytics to enable you to
monitor the health of the network, you might prefer to receive alerts about
certain events so you can act quickly to remediate them. The FMC allows
you to configure email alerts, logging to a server, and SNMP traps.
The system can generate alerts when one of the following happens:
An intrusion event with a specific impact flag
A discovery event
A malware event or retrospective malware event
A correlation event from a specific correlation policy violation
A connection event from an access control rule
A specific status change for a module in a health policy
You set intrusion alerts in the advanced settings in an intrusion policy

configuration. You can do this at either Policies > Intrusion > Intrusion
Policy (see Figure 12-21) or Policies > Intrusion > Email (shown later, in
Figure 12-24).
Figure 12-21 Alert Settings in Intrusion Policy Configuration
The email, SNMP, and syslog alert settings used in various alert
configurations in the system are configured at Policies > Actions > Alert, as
453
Figure 12-22 Alert Server Profile Configuration
SNMP Alerts
Each SNMP alert generated by the NGIPS contains the following

information:
Name of the server generating the trap
IP address of the device that detected it
Name of the device that detected it
Event data
By clicking the Edit button in the policy’s advanced settings, you can set the
SNMP trap settings as shown in Figure 12-23. These include binary or
string rendering of the IP addresses, SNMP version, server address,
authentication password, encryption password, and username. The
configuration fields change depending on the SNMP version.
Figure 12-23 SNMP Trap Configuration in IPS Policy
For SNMP traps and syslogs, the actual events are generated by the sensor
itself. The alerts configured at Policies > Actions > Alerts are generated by
the FMC and leverage the correlation engine.
Email Alerts
454
Email alerts generated by the NGIPS contain the following information:
Total alerts in the database
Last email time
Current time
Total new alerts
Number of events that matched specified email filters
Timestamp, protocol, event message, and source and destination IP

addresses and ports, with traffic direction information for each event
Number of events per destination port
Number of events per source IP address
By configuring the email fields at Policies > Intrusion > Email, you can set
the sender and receiver, the maximum events, and frequency per email;
enable summarization and coalescing of the alerts; set the time zone; and
enable alerting for specific IPS rules (see Figure 12-24).
Figure 12-24 Email Alert Settings for an Intrusion Policy
Syslog Alerts
455
Syslog alerts generated by the NGIPS contain the following information and
more:
Date and time of alert generation
Event message
Event data
Generator ID of the triggering event
Snort ID of the triggering event
Revision
As shown in Figure 12-25, editing the syslog settings in the policy’s

advanced settings brings up the host IP address, the syslog facility (as a
categorization at the syslog server), and the syslog level (priority). You can
use these settings at the syslog level to look for events of certain categories
and priority levels.
Figure 12-25 Syslog Alert Settings for an Intrusion Policy
The FMC platform can also alert based on event impact. You set the impact
in the FMC based on the correlation between the IPS policy rules and the
network discovery. The FMC shows the relevance of the attack to the host
that is actually targeted. Higher-impact events are of more importance for
the host in question than are lower-impact events. As shown in Figure 12-
26, under Policies > Actions > Alerts, you can configure syslog, email, and
SNMP alerts based on triggered event impact.
456
Figure 12-26 Impact Alert Settings
You configure the syslog, email, and SNMP profiles on the Alerts tab (refer
to Figure 12-22). In addition, you can configure discovery event and
malware alerts on other tabs, as discussed in Chapter 6, “Cisco AMP for
Networks.”
Correlation Policies
Correlation policies are policies that can perform actions based on

correlation criteria met. They consist of correlation rules, compliance
whitelists, and responses that are triggered when a certain event takes place
or other criteria are met.
You create correlation policies at Policies > Correlation in the FMC.

Figure 12-27 shows a correlation policy rule added in the Rule Management
tab; it signifies the event that needs to happen for the correlation policy to
be triggered. Correlation policy rules can include IPS events and many other
options, such as a discovery event, a user activity, a host event, a malware
event, a connection event, or a traffic profile change. If a correlation rule or
a compliance whitelist is violated, a remediation or an alert can be
generated. Note that correlation rules that are not added to a correlation
policy do not actually take effect. They must be added to a correlation
policy and assigned an action before they become active.
457
Figure 12-27 Correlation Policy Rule Management
You can also define a whitelist and a profile by using the corresponding
tabs. A compliance whitelist is a list between a destination and the host
profiles discovered in the network. If traffic that violates the whitelist is
identified, a whitelist alert is generated, and the appropriate remediation
action takes place (see Figure 12-28).
Figure 12-28 Correlation White List
A traffic profile is a profile of the traffic on a network, based on connection

data logged over a time span that the administrator specifies.
The FMC can also send an alert based on the correlation policy. The Policy
Management tab has a response icon (see Figure 12-29) for each correlation
rule that brings up the available responses, as shown in Figure 12-30. As
you saw previously in Figure 12-22, the responses are set at Policies >
Actions > Alert.
458
Figure 12-29 Correlation Response Button in Correlation Policy
Figure 12-30 Correlation Policy Response
Moreover, other than responses, a correlation policy remediation can be

applied when a violation occurs. There are preloaded modules for
remediation in the FMC: IOS null route, PIX shun, Nmap remediation, and
set attribute date. You can create remediation instances for the available
remediation modules at Policies > Actions > Remediations > Instances.
You can then use a remediation instance in a correlation rule as the response
action. When a remediation is launched, a remediation status event is
generated. Remediation events can be searched, viewed, and deleted just
like other events.
Troubleshooting
At times you might experience issues or failures in a system. To

troubleshoot such issues, the FMC provides troubleshooting tools and
features. The following sections summarize some of the troubleshooting
tools available for trying to find the root cause of an issue in the FMC.
459
Audit
Audits are used to examine user interaction with the FMC web interface and
system logs. Audits are presented like an event view that allows for the
analysis of audit log messages. Only 100,000 logs are stored at a time in the
audit log. Beyond that limit, the older messages are removed in favor of the
new ones.
The predefined audit logs can be viewed at System > Monitoring > Audit,
Figure 12-31 Audit Log Dropdown
The predefined audit log view shown in Figure 12-32 displays all
interactions of the administrator using the GUI interface. It also includes the
time, the action, the address of the administrator, and the event description.
Figure 12-32 Audit Logs
The Edit Search button in a log view allows you to do custom searches
based on different criteria, such as user, message, time, source IP address,
or change.
Health Monitoring
The health of a device is important to ensure that there are no issues with its
operation. FMC’s health monitor provides numerous ways of keeping track
460
of the health of an NGIPS. A series of tests define a health policy that can be
applied to multiple devices to monitor their health. Tests can be scheduled
and run periodically or at will. You can check the health status of a device
from FMC health charts and status tables. Figure 12-33 shows the Health
tab options:
Monitor
Policy
Events
Blacklist
Monitor Alerts
Figure 12-33 FMC’s Health Tab
A health policy consists of health modules, which are test scripts you run to
test the health of the device. The FMC offers a variety of health modules,
such as AMP, appliance heartbeat, disk usage, disk status, CPU, and more.
As shown in Figure 12-34, the Health Policy tab has all the modules
available on the left side. You can choose a module to enable it and set
preferred values. For example, for the CPU, Memory, and Disk usage
module, there is a warning and critical CPU threshold that triggers warning
or critical syslog messages, respectively. Specifically for IPS, the IPS event
rate option configures the event thresholds that trigger warnings and critical
messages. There are many more modules that can be configured under the
health policy.
461
Figure 12-34 Health Policy Configuration
The FMC also allows you to compare a health policy against older health
policies.
On the Health tab, the Blacklist option allows you to disable health
monitoring for specific devices or health modules (see Figure 12-35). For
example, if there is a network update that will bring the network down or an
interface status is expectedly flapping, a blacklist could disable the alerts on
the segment or the interface status. You can apply blacklists to a device or a
module.
Figure 12-35 Health Blacklist
The Health Events tab, shown in Figure 12-36, displays all the health-
related events from the system. To view only the events specific to one
device, you can go to the Health Monitor and click the device name link.
When you choose the alert level, the table shows only the health alerts
462
related to that alert level.
Figure 12-36 Health Events
By using the Health Monitor Alerts tab, you can configure notifications
through email, SNMP, or remote syslogs about changes in a health module
status. For example, an email can be sent when a CPU meets a warning
level. A second email can be sent for a CPU of critical level. Figure 12-37
shows how you can set up a module to alert using one of the three options
(right column) and severity (left column).
Figure 12-37 Health Alerts
Syslogs
For troubleshooting purposes, you can view the syslogs from the FMC at
System > Monitoring > Syslog. The syslog displays each message
generated by the system. Each syslog contains the date that the message was
generated, the time it was generated, the host that generated the message,
and the message itself. System logs are not generated by the devices
themselves; they refer to the FMC appliance or VM.
There is also a search field you can use to search through the logs by using
463
grep-like regular expressions, as illustrated in Figure 12-38. You can set the
syslog filter to be case sensitive and to exclude the syslog that matches the
filter.
Figure 12-38 Syslogs
Summary
This chapter demonstrates how an analyst can use the FMC to analyze and
investigate information generated by an NGIPS. You have seen how to
review and look into intrusion events, create reports, analyze incidents, and
generate alerts. You have learned how to create custom workflows and
correlation policies. You have also learned about the troubleshooting
capabilities of an NGIPS. You have learned how to monitor the health of a
system, use health alerts, and audit the status of a device to ensure its
smooth operation.
464
Index
{ } (braces), xxi
[ ] (square brackets), xxi, 77
| (vertical bar), xxi
1-to-1 signatures, 145
AAA authentication
aaa authentication http console command, 80
aaa authentication ssh console command, 82
about this book, xix–xxi
accelerated security path (ASP), 139
access control, 14, 28, 267
access control lists (ACLs), 84
access control policies, 92–101
adding rules to, 94–98
advanced settings for, 100–101
creating new, 93–94
displaying the details of, 121–125
HTTP responses and, 98, 99, 100
Security Intelligence and, 98, 99
465
viewing, 92
ACLs (access control lists), 84
activation codes, 247–248
Active Directory Group Policies, 240
active/active failover, 47–49
active/standby failover, 45–46
adaptive scanning, 19
Adaptive Security Device Manager. See ASDM
administrative features
AMP for Linux, 235
AMP for Mac, 230
AMP for Windows, 216–217
administrative network, 261
advanced analytics, 147
advanced custom detections, 201–203
air gap mode, 151, 156
alert header, 295
alerts, 318–322
email, 320
SNMP, 319–320
syslog, 321
466
all keyword, 137
AMP (Advanced Malware Protection), 14, 141–143
features and architecture, 142
threat intelligence sources, 142–143
AMP client connectors, 142
AMP cloud, 142–169
architecture of, 142, 197
dashboard for, 149, 251–253
prevention framework for, 144–148
private version of, 149–169
retrospective framework for, 148
role and features of, 143–144
Threat Grid solution, 258–259
threat intelligence sources, 142–143
See also private AMP cloud
AMP for Android
installation process, 247–250
policy options, 235–236
system requirements, 235
AMP for Content Security, 183–194
description, 183–184
467
ESA configuration, 189–191
illustration of flows, 185
reports, 192–193
reputation scoring, 184
WSA configuration, 185–188
AMP for Endpoints, 9–12, 195–254
AMP cloud connectivity, 198
Android OS and, 235–236, 247–250
AnyConnect client and, 238–239
application control, 207–209
architecture, 197
cloud console and, 251–253
custom detections, 199–206
Download Connector, 238
exclusion sets, 209–211
groups, 236–237
installing, 239–250
Linux OS and, 233–235, 245–247
Mac OS and, 227–233, 242–245
Outbreak Control, 199–211
overview of, 196–197
platforms for running, 212
468
proxy complications, 250–251
Windows OS and, 212–227, 239–242
AMP for Linux, 233–235
system requirements, 233
AMP for Mac, 227–233
administrative features, 230
cache settings, 232
client user interface options, 230–231
DFC configuration, 233
mode options, 232
offline engine option, 232
product updates, 231
proxy settings, 231
scheduled scans, 233
system requirements, 227–228
AMP for Networks, 12, 171–181
file policies, 174–180
functions performed by, 172–173
469
installation options for, 172
management center names, 171
administrative features, 216–217
cache settings, 222
client user interface options, 218–219
cloud policy settings, 224–225
DFC configuration, 226
engine options, 223–224
identity persistence options, 217–218
known incompatible software, 227
mode options, 221
product updates, 220
proxy settings, 219–220
scheduled scans, 225–226
system requirements, 212–214
AMP Threat Grid, 12–13, 255–261
cloud solution, 258–259
default users, 260–261
description of, 147, 255–257
470
Glovebox feature, 256–257
network segment configuration, 261
object types supported by, 148, 256
on-premises appliance, 259–261
security content feed formats, 257
analysis
dynamic, 177, 259
file, 188, 189–191
local malware, 177
network, 100–101
NGIPC, 307–324
running process, 130
threat, 271–272, 278
Android OS
activation codes, 247–248
AMP configuration options, 235–236
AMP installation process, 247–250
custom detections on, 204
anti-spam features, 14
antivirus software, 10–11
any header, 295
471
AnyConnect ISE Agent, 23
AnyConnect Secure Mobility Client, 238–239
any-to-any challenge, 265
application control, 204, 207–209
application programming interfaces (APIs), 23, 29, 257, 260
Application Visibility and Control (AVC), 6, 20, 36
applications
access control rules for, 97
visibility/control of, 6, 20, 36, 267
whitelists for, 207–209
apps, AMP for Android, 247–250
architecture
AMP cloud, 142, 197
AMP for Endpoints, 197
data center services, 59, 60
archive files, 178, 179
ASDM (Adaptive Security Device Manager), 6
analyzing running processes in, 130
boot image file transfer, 70, 71
Cisco ASA FirePOWER module configuration using, 92–114
Cisco ASA setup for access to, 79–82
472
generating troubleshooting files in, 137–138
interface configuration, 85
methods of launching, 80
monitoring the disk usage in, 129
NGIPS management by, 267
real-time eventing, 132–133
task status information, 136
uploading, 78–79
viewing the syslog in, 132
asdm image command, 79
asdm-launcher.msi utility, 80
ASP (accelerated security path), 139
asymmetric routing (ASR) groups, 47
asymmetric traffic flows, 273
attack continuum, 3–4, 16, 266
audits, 324–325
authentication
email, 14
Kerberos/GSSAPI, 251
automated tuning, 265
Automatic Application Bypass (AAB), 274
473
auto-MDI/MDIX feature, 85
AVC (Application Visibility and Control), 6, 20, 36
back doors, 10
backups, deleting old, 128
Balanced Security and Connectivity policy, 290
blacklist of IP addresses, 205–206
Block Files rule action, 176
Block Malware rule action, 176
blocking
applications, 207, 208
file types, 110
IP addresses, 205–206
web pages, 98, 99, 100
boot image installation
Cisco ASA 5500-X appliance, 69–73
Cisco ASA 5585-X appliance, 67–69
Firepower Threat Defense, 115
botnets, 5–6
bridge virtual interface (BVI), 84
BYOD (bring-your-own device) systems, 23
474
C
cache settings
AMP for Mac, 232
AMP for Windows, 222
capacity handling, 177
cat command, 134–135
cat schedule_tasks.log command, 134–135
CCLs (cluster control links), 61
centralized connections, 54–55
certificate authority (CA), 23
CIDR (classless interdomain routing) notation, 205
CIMC (Cisco Integrated Management Controller), 261
Cisco ASA 5500-X appliances, 4–6
ASDM setup/access, 78–82
boot image installation, 69–73
Cisco ASA FirePOWER module setup, 69–87
device name setup, 82
FirePOWER module management interface, 34–36
Firepower Threat Defense and, 62
interface configuration, 83–87
model and usage table, 4–5
475
password setup, 82–83
Cisco ASA 5500-X Series Next-Generation Firewalls LiveLessons

(Workshop): Deploying and Troubleshooting Techniques, 6
Cisco ASA 5508-X appliances, 73–77
Cisco ASA 5585-X appliances
boot image installation in, 67–69
Cisco ASA FirePOWER module setup in, 65–69
FirePOWER module management interface in, 32–34
Cisco ASA: All-in-One Next-Generation Firewall, IPS, and VPN

Services, third edition, 7, 25
Cisco ASA with FirePOWER Services module, 4–6, 27–63
access control policies, 92–101
Cisco ASA 5500-X appliance setup, 69–87
Cisco ASA 5585-X appliance setup, 65–69
clustering, 49–55
compatibility, 42, 115
configuring using the ASDM, 92–114
data center deployment, 58–61
debugging commands, 140
default settings, 67
failover, 45–49
476
Firepower Threat Defense, 61–62
FMC configuration, 91
initial setup menu, 77–78
inline mode, 29–30
interface configuration, 83–87
Internet edge deployment, 56
intrusion policies, 102–108
key capabilities, 28–29
licenses, 37–42
management options, 31–36
packet processing order of operations, 42–44
promiscuous monitor-only mode, 30–31
redirecting traffic to, 87–91
reusable object management, 111
show commands, 119–139
sizing considerations, 36
Sourcefire technology and, 6
SSL VPM implementation, 80
troubleshooting, 119–140
updating, 111–114
VPN deployment, 56–58
Cisco ASAv, 59, 60
477
Cisco AsyncOS operating system, 19–20
Cisco Cloud Web Security (CWS), 21–22
Cisco Firepower 4100 series appliances, 7
Cisco FirePOWER 7000 Series appliances, 8
Cisco FirePOWER 8000 Series appliances, 8
Cisco Firepower 9300 series appliances, 7–8
Cisco Firepower compatibility guide, 115
Cisco Firepower Management Center. See FMC
Cisco Firepower Threat Defense. See FTD
Cisco Identity Services Engine (ISE), 22–23
Cisco Integrated Management Controller (CIMC), 261
Cisco Meraki
cloud-managed MDM, 23–24
cloud-managed security appliances, 24
Cisco NAC Agent, 23
Cisco NAC Web Agent, 22
Cisco Security Management Appliance. See SMA
Cisco SenderBase, 14
Cisco Smart Account, 62
Cisco Smart Call Home functionality, 81
Cisco Software Central, 62
478
Cisco Talos, 98, 104, 143
Cisco Web Security Appliance. See WSA
ciscoasa> prompt, 77
ciscoasa device name, 82
ClamAV antivirus software, 11, 143, 232
classification, event type, 106–107
classless interdomain routing (CIDR) notation, 205
clean file disposition, 177
clean network, 261
CLI. See command-line interface
client user interface options
AMP for Linux, 235
cloud console, 251–253
Cloud Email Security, 15
cloud host access, 198
cloud notifications, 218
cloud policy settings, 224–225
cloud proxy mode, 150, 151, 156
Cloud Web Security (CWS), 21–22
479
cluster control links (CCLs), 61
clustered Cisco ASA, 49–55
centralized connections in, 54–55
cluster member election in, 51–52
connection establishment and tracking in, 52–55
flow owner failure in, 55
individual interface mode in, 50–51
NGIPS appliances and, 274, 275, 305
spanned EtherChannel configuration in, 50
TCP connections in, 52–53
UDP-like connections in, 53–54
Collective Security Intelligence (CSI), 143
command syntax conventions, xxi
command-line interface (CLI), 32
analyzing running processes in, 130
boot image file transfer, 70
Linux AMP connector, 247
show command, 120
commands
ASA debugging, 140
480
See also specific commands
comma-separated values (CSV) format, 257
committing a policy, 291–292
compliance standards, 278
concurrent connections, 36
configure firewall [routed|transparent] command, 116
configure manager command, 91
configure network command, 116
Connectivity over Security policy, 290
connector identity persistence, 217–218
console account, 158
constant special ID lists (CSIDL), 210
content awareness, 264
content keyword, 296
contextual awareness, 264
Control license, 38, 277
copy command, 70, 79
correlation policies, 322–324
critical network segments, 271
crown jewels, 271
CSI (Collective Security Intelligence), 143
481
CSV (comma-separated values) format, 257
advanced, 201–203
Android, 204
IP blacklist/whitelist, 205–206
simple, 199–201
custom file disposition, 177
custom workflows, 314
CWS (Cloud Web Security), 21–22
cxsc keyword, 70
Cyber Observable Expression (CybOX) format, 257
dashboard, AMP cloud, 149, 251–253
data center
Cisco ASA FirePOWER deployment in, 58–61
service insertion components, 59
services architecture, 59, 60
data loss prevention (DLP), 14, 19
data VLANs, 61
DCE/RPC preprocessor, 299
debug sfr error command, 140
482
debug sfr event command, 140
debug sfr message command, 140
debugging commands, 140
Defense Center (DC), 172
deleting old backup files, 128
demilitarized zones (DMZs)
NGIPS deployment and, 271
semi-trusted networks as, 83
deployment lifecycle for NGIPS, 277–282
evaluation and control, 282
implementation and operation, 281–282
policy definition, 278
product selection and planning, 279–280
Detect Files rule action, 176
detection options
file rule, 110, 176–177
intrusion rule, 107–108
detection signatures, 143
detection_filter keyword, 296
device flow correlation (DFC), 147, 226, 233, 235
device name, Cisco ASA appliance, 82
483
device trajectory, 196
df command, 128
DFC (device flow correlation), 147, 226, 233, 235
DHCP (Dynamic Host Configuration Protocol), 5
AMP private cloud installation and, 152
Cisco ASA interface configuration and, 84
diagnostic interface, 116, 117
dirty network, 261
disk/storage usage monitoring, 128–129
displaying
access control policy details, 121–125
network configuration, 125–128
routing table, 126
DKIM (DomainKeys Identified Mail), 14
DLP (data loss prevention), 14, 19
DMZs. See demilitarized zones
DNS preprocessor, 299
DomainKeys Identified Mail (DKIM), 14
domain-name command, 83
DONTRESOLVE keyword, 91
Download Connector, 238
484
downloaders, 10
downtime, 274
duplex mode, 85
dynamic analysis, 177, 259
Dynamic Host Configuration Protocol. See DHCP
dynamic routing in FTD, 117
east-to-west communication, 58
email alerts, 320
email authentication, 14
email encryption, 14
email security, 13–16
Cloud Email Security, 15
Email Security Appliance, 13–15
Hybrid Email Security, 16
Email Security Appliance. See ESA
enable password command, 83
encryption
email, 14
password, 83
endpoint IOC downloads, 198
485
endpoint protection. See AMP for Endpoints
engines
AMP for Mac, 232
Enhanced Interior Gateway Routing Protocol (EIGRP), 5
error reporting connectivity, 198
ESA (Email Security Appliance), 13–15
AMP report from, 192
configuring for AMP, 189–191
ESA models list, 13–14
features supported by, 14–15
Ethos engine, 145, 224
evaluation of NGIPS, 282
events
impact alerts, 321, 322
logging limits, 304–305
queue configuration, 303
server connectivity, 198
statistics, 309
See also intrusion events
486
expert command, 133
exploits, 10
extension exclusions, 209
$EXTERNAL_NET header, 295
extranets, 271
fail-open capability, 49, 269, 275
failover in Cisco ASA, 45–49
active/active failover, 47–49
active/standby failover, 45–46
fail open vs. fail close, 49
stateful failover, 47
failover replication http command, 47
fast_pattern keyword, 296
file analysis
ESA for AMP configuration, 189–191
WSA for AMP configuration, 188
File Analysis report, 192
file control, 28
file dispositions, 150, 177
487
advanced, 178–180
AMP configuration of, 174–180
creating new, 108–109, 174
file dispositions/types and, 177–178
setting rules for, 110, 174, 176–177
zip/archive files and, 178
file reputation, 19, 142, 196
ESA for AMP configuration, 189–191
WSA for AMP configuration, 185–188
file retrospection, 20, 142, 196
file sandboxing, 20, 142, 196, 256
file trajectory, 196
file_data keyword, 296
FireAMP. See AMP for Endpoints
Firepower Management Center. See FMC
Firepower Threat Defense. See FTD
FireSIGHT license, 277
firewalls
AMP for Endpoints and, 198
FTD mode for, 116
personal, 11
488
flags keyword, 296
flash (disk0)
boot image file transfer, 71
space requirement, 70
flow handling, 272–273
flow owner failure, 55
flow value, 296
flowbits keyword, 296
FMC (Firepower Management Center), 9
alerts generated in, 318–322
AMP for Networks and, 171, 174
Cisco ASA FirePOWER managed by, 6, 32
configuration of Cisco ASA FirePOWER for, 91
correlation policies in, 322–324
features provided in, 268
FireSIGHT license for, 277
health monitor in, 325–327
incident creation in, 317–318
intrusion events in, 308–314
monitoring the usage of, 129
NGIPS management by, 267–268, 285
489
reports provided by, 315–316
Snort rules managed in, 298–299
syslogs viewed in, 327–328
FMC Virtual Appliance, 9
FS750 FMC appliance, 9
FTD (Firepower Threat Defense), 7–8, 114–118
boot image installation, 115
Cisco ASA FirePOWER, 61–62
Cisco Firepower 4100 series, 7
Cisco Firepower 9300 series, 7–8
Cisco FTD for Cisco ISRs, 8
firewall modes, 116
interface types, 116–117
security zones, 117
software installation, 115–116
static and dynamic routing, 117–118
FTP and Telnet preprocessor, 299
490
fully qualified domain names (FQDNs), 161–162
General Packet Radio Service (GPRS), 47
geolocation updates, 113–114
geolocation-based rules, 96
Glovebox feature, 256–257
GPG public key, 245
GPRS Tunneling Protocol (GTP), 47
graphs, intrusion event, 309–310
groups, AMP for Endpoints, 236–237
GTP preprocessor, 300
health monitoring, 325–327
hide notification options, 219
high availability, 267, 276
host and user awareness, 265
host intrusion prevention systems (HIPS), 11
host statistics, 309
hostname command, 83
Howard, Eric, 144
HTTP preprocessor, 299
491
HTTP response pages, 98, 99, 100
http server enable command, 80
HTTPS content inspection, 251
$HTTPS_PORTS header, 295
$HTTPS_SERVERS header, 295
Hybrid Email Security, 16
identity management, 267
Identity Services Engine (ISE), 22–23
ifconfig command, 127
IMAP preprocessor, 300
Immunet software, 11, 143
impact alerts, 321, 322
impact assessment, 265
implementation, NGIPS, 281
incidents, NGIPS, 316–318
indicators of compromise (IOCs), 146
individual interface mode, 50–51
inline mode
Cisco ASA, 29–30
NGIPS, 268–269
492
installing
AMP for Endpoints, 239–250
AMP private cloud, 151–169
Firepower boot image/system software, 67–73
FTD software, 115–116
NGIPS management platform, 281
Integrated Services Routers (ISRs), 8
intelligence sources, 142
interfaces
Cisco ASA appliance, 83–87
FTD types of, 116
Internet edge deployment, 56
intrusion detection/prevention, 28
intrusion events, 308–314
graphs, 309–310
performance, 309
reports, 312
searching, 311
statistics, 308–309
workflows, 310, 313–314
intrusion policies, 100, 102–108
493
configuring, 289–291
creating new, 102, 106
custom rules for, 104–108
editing, 103
importing rules for, 104, 105
rule management, 103–104
intrusion prevention systems (IPS)
legacy vs. next-generation, 264–265
See also NGIPS
IOCs (indicators of compromise), 146
ip address dhcp [setroute] interface subcommand, 84
IP addresses
blacklists and whitelists of, 205–206
Cisco ASA interface configuration and, 84
IPS. See intrusion prevention systems
ISE (Identity Services Engine), 22–23
ISRs (Integrated Services Routers), 8
Java applet, launching ASDM as, 80
JavaScript Object Notation (JSON) format, 257
494
Kerberos/GSSAPI authentication, 251
key loggers, 10
LACP (Link Aggregation Control Protocol), 50, 273
latency-based packet thresholding, 303
latency-based rule thresholding, 304
Layer 4 traffic monitoring, 19
legacy IPS vs. NGIPS, 264–265
licenses
Cisco ASA FirePOWER, 37–42
Cisco NGIPS, 277
Link Aggregation Control Protocol (LACP), 50, 273
link redundancy, 274
Linux OS
exclusion set example, 211
listeners, email, 15
local malware analysis, 177
logging standby command, 46
logic bombs, 10
495
logs
audit, 324–325
scheduled tasks, 134–135
syslog, 132–135
Mac OS X
running the ASDM on, 81
mail exchangers (MX), 15
mail gateways, 15
mailer worms, 9
malware
attachments containing, 13
cloud lookup for, 110
file disposition indicating, 177
file rules for blocking, 110
software for preventing, 10–11
successful quarantine of, 252
496
types of, 9–11
Malware Cloud Lookup rule action, 176
Malware license, 37, 39, 173, 277
Management-0 port, 67
management interface, 116
management options, Cisco ASA FirePOWER, 31–36
management platform integration, 276
management server connectivity, 198
mass-mailer worms, 9
Maximum Detection policy, 290
mean time between failure (MTBF), 274
Meraki. See Cisco Meraki
metadata keyword, 296
mobile device management (MDM) solutions, 23
Mobile User Security (MUS) feature, 42
mode options
AMP for Mac, 232
FTD firewall, 116
NGIPS, 268–270
private AMP cloud, 150, 151, 156
497
Modular Policy Framework (MPF), 43
monitoring
NGIPS health, 325–327
passive NGIPS mode for, 269–270
real-time event, 132–133
storage usage, 128–129
system tasks, 136
nameif command, 84
Netflow Secure Event Logging (NSEL), 46
Network Address Translation (NAT), 5, 91
Network Admission Control (NAC), 22
network analysis policy, 100–101
network antivirus, 14
network behavioral analysis, 267
network configuration
AMP private cloud, 160–162
AMP Threat Grid, 261
displaying in Cisco ASA, 125–128
See also AMP for Networks
network preprocessors, 300
498
Network Time Protocol (NTP), 164, 165
network variables, 287
next-generation firewall (NGFW) appliances, 266
next-generation security defenses, 3
NGIPS (Next-Generation Intrusion Prevention Systems), 8–9, 263–328
alerts, 318–322
analysis process, 307–324
audits, 324–325
basic concepts, 263–271
capabilities, 265–268
configuration, 285–306
correlation policies, 322–324
deployment lifecycle, 277–282
deployment locations/scenarios, 270–271
flow handling, 272–273
health monitoring, 325–327
incidents, 316–318
inline mode, 268–269
intrusion events, 308–314
legacy IPS vs., 264–265
licensing and cost, 276–277
management platform integration, 276
499
monitoring mode, 269–270
performance settings, 303–305
policy settings, 286–292
preprocessors, 299–301
Recommendations feature, 301–302
reports, 315–316
scale and availability, 273–275
Snort rules, 292–302
stacking/clustering, 305
syslogs, 327–328
system capabilities, 271–272
variables, 287–288
NGIPSv (virtual next-generation IPS) appliances, 8, 266
No Rules Active policy, 290
noconfirm option, 69
north-to-south communication, 58
NTP (Network Time Protocol), 164, 165
object management, 111
Offline Engine options
500
ClamAV, 232
TETRA, 223
Open Shortest Path First (OSPF), 5
open standards, 272
Open Virtualization Archive (OVA) format, 151
operation phase for NGIPS, 281
order of operations, packet processing, 42–44
Outbreak Control, 199–211
application control, 207–209
outbreak filters, 14
OVA (Open Virtualization Archive) format, 151
PAC (proxy auto-configuration) files, 21, 250, 251
Packet Data Protocol (PDP), 47
packet processing order of operations, 42–44
password command, 82, 83
passwords
AMP private cloud, 153, 154
AMP Threat Grid, 260, 261
501
Cisco ASA appliance, 82–83
patches
Cisco ASA FirePOWER module, 111
deleting older updates and, 129
path exclusions, 209, 210
pattern matching, 299
PDP (Packet Data Protocol), 47
performance
intrusion event, 309
NGIPS settings for, 303–305
statistics about, 304
Perl Compatible Regular Expressions (PCRE), 304
personal firewalls, 11
phishing emails, 13
PKG file, AMP for Mac, 242
planning NGIPS deployment, 279–280
Platform Exchange Grid (pxGrid), 23
platform-based defenses, 3
policies
access control, 92–101
AMP for Android, 235–236
502
AMP for Linux, 234–235
AMP for Networks, 174–180
correlation, 322–324
file, 108–110
intrusion, 100, 102–108, 289–291
NGIPS, 278, 286–292
policy layers, 286–287
policy server connectivity, 198
policy variables, 287
POP preprocessor, 300
ports
access control rules for, 97
variables created for, 288
preprocessors, NGIPS, 299–301
prevention framework for AMP cloud, 144–148
1-to-1 signatures, 145
advanced analytics, 147
device flow correlation, 147
Ethos engine, 145
503
indicators of compromise, 146
Spero engine, 145
Threat Grid, 147–148
private AMP cloud, 149–169
air gap mode, 151, 156
cloud proxy mode, 150, 151, 156
cloud server configuration, 162–163
console account, 158
date/time configuration, 164
key metrics screen, 168
license file, 156, 157
login process, 168–169
network configuration, 160–162
notifications setup, 163–164
recovery file setup, 165
storage configuration, 158–160
private listeners, 15
product selection for NGIPS, 279–280
product updates
AMP for Mac, 231
504
production interface, 160
promiscuous monitor-only mode, 30–31
Protection license, 37–38, 277
proxy auto-configuration (PAC) files, 21, 250, 251
proxy servers
AMP for Endpoints complications with, 250–251
AMP for Mac settings for, 231
AMP for Windows settings for, 219–220
ps command, 130
pseudo-stateful connections, 53–54
pstree command, 131
public listeners, 15
quarantined files, 252
Radware DefensePro DDoS mitigation software, 8
ransomware, 10
real-time antimalware adaptive scanning, 19
real-time contextual awareness, 267, 272
real-time event monitoring, 132–133
Recommendations feature, 301–302
505
regular expression limits, 304
regulatory compliance, 272
remediation instances, 324
remote-access VPNs, 25, 57
reports
AMP for Content Security, 192–193
incident, 318
intrusion event, 312
NGIPS, 272, 315–316
representational state transfer (REST) API, 260
reputation of files. See file reputation
reputation scoring, 184
retrospection process, 20, 148, 172
retrospective framework for AMP cloud, 148
reusable object management, 111
RIP (Routing Information Protocol), 5
rm command, 129
ROMMON, 67, 115
root (/) partition, 129
rootkits, 10
routed mode deployment interface, 116
506
Routing Information Protocol (RIP), 5
routing table, displaying, 126
RPM Package Manager file, 245
Rule Actions page, 89
Rule Editor, 104, 105
rule options bar, 298–299
rules
access control policy, 94–98
correlation policy, 322, 323
file policy, 110, 174, 176–177
intrusion policy, 103–108
recommendations about, 301–302
Snort, 266, 292–302
updates for, 112–113
running processes, analyzing, 130–131
same-security-traffic permit inter-interface global configuration

command, 84
sandboxing, 20, 142, 196, 256
SCADA preprocessor, 300
SCCM (System Center Configuration Manager), 240
scheduled scans
507
AMP for Mac, 233
scheduled tasks log, 134–135
searching intrusion events, 311
secure copy (SCP), 137
Secure Shell (SSH), 66, 119, 300
Secure Sockets Layer (SSL) protocol, 80, 260, 300
security automation, 267
security content feeds, 257
security contexts, 45–46
security group access control lists (SGACLs), 22
security group tags (SGTs), 22
security information and event management (SIEM) solutions, 257
Security Intelligence feature, 98
Security Management Appliance. See SMA
security model, NGIPS, 278
security operations center (SOC), 260
Security over Connectivity policy, 290
security zones in FTD, 117
segmentation, 267
Sender ID Framework (SIDF), 14
508
Sender Policy Framework (SPF), 14
SenderBase, Cisco, 14
service policy configuration, 87–88, 90
session command, 71, 72, 73, 119
Session Initiation Protocol (SIP), 47
session sfr command, 66
setup command, 68, 72, 78, 115
SFDC (SourceFire Defense Center), 171
SHA-256 hashes, 172, 199, 201, 207
show access-control-config command, 121–125
show asp drop command, 139
for analyzing running processes, 130–131
for displaying access control policy details, 121–125
for generating advanced troubleshooting logs, 136–139
for listing available commands, 120–121
for monitoring storage usage, 128–129
for monitoring/troubleshooting system tasks, 136
for network configuration, 125–128
for using the system log, 132–135
show disk command, 128
509
show ifconfig command, 126–127
show interface command, 85–87, 127–128
show network command, 125–126
show network-static-routes command, 126
show process command, 130
show process-tree command, 130–131
show route command, 126
SIDF Framework, 14
SIDs (Snort IDs), 106, 296
SIEM solutions, 257
signature types, 201
simple custom detections, 199–201
Simple Mail Transfer Protocol (SMTP), 15
SIP preprocessor, 300
SIP (Session Initiation Protocol), 47
site-to-site VPNs, 25, 57
SMA (Security Management Appliance), 20–21
centralized deployment, 20
SMA models list, 20–21
SMAV (Security Management Virtual Appliance), 20
SMTP daemons, 15
510
SMTP preprocessor, 300
SNMP alerts, 319–320
Snort IDs (SIDs), 106, 296
Snort rules, 266, 292–302
anatomy of, 293–296
body options, 295–296
explained, 292–293
feed format, 257
header options, 294–295
managing in FMC, 298–299
NGIPS preprocessors and, 299–301
recommendations about, 301–302
tuning, 282
writing, 297
SourceFire Defense Center (SFDC), 171
SourceFire Rule Updates (SRU), 282, 297
Sourcefire technology, 6
spam, 13
spammers, 10
spanned EtherChannel, 50
spear phishing, 13
511
speed configuration, Cisco ASA, 85
Spero Analysis for EXEs, 177
Spero technology, 145, 184, 224
SPF (Sender Policy Framework), 14
SRU (SourceFire Rule Updates), 282, 297
SSH (Secure Shell), 66, 119, 300
SSL (Secure Sockets Layer) protocol, 80, 260, 300
stacking, 267, 274, 305
stateful failover, 47
static routing in FTD, 117–118
statistics
intrusion event, 308–309
performance, 304
STIX format, 257
storage
configuring for AMP private cloud, 158–160
monitoring usage of, 128–129
Structured Threat Information Expression (STIX) format, 257
stub installer, 239–240
submission server access, 198
Sun RPC preprocessor, 299
512
sw-module module sfr recover boot command, 70
sw-module module sfr shutdown command, 70
sw-module module sfr uninstall command, 70
sync command, 68, 115
syntax conventions, xxi
syslog alerts, 321
syslogs
ASDM FirePOWER, 132–135
FMC generated, 327–328
System Center Configuration Manager (SCCM), 240
system default variables, 287
system generate-troubleshoot command, 136–137
system install [noconfirm] url command, 69, 72, 115
system reboot command, 68
system requirements
AMP for Android, 235
AMP for Linux, 233
system support firewall-engine-debug command, 138–139
system tasks, monitoring/troubleshooting, 136
513
T
tail command, 192
Talos, Cisco, 98, 104, 143
task scheduler, 316
TCP connections, 52–53
tcp header, 295
Telnet passwords, 82
TETRA settings, 223
tftp command, 68
TFTP file transfer, 70
tftpdnld command, 68
third-party DLP integration, 19
threat analysis, 271–272, 278
threat containment/remediation, 267
threat detection preprocessors, 301
threat exclusions, 209
Threat Grid. See AMP Threat Grid
threat landscape, 2–3
threat-focused defenses, 3
traceability management, 267
traffic class configuration, 88, 89
514
traffic profile, 323
Trojan horse, 10
troubleshooting
Cisco ASA with FirePOWER Services, 119–140
Firepower Threat Defense, 119, 140
generating advanced logs for, 136–139
NGIPS, 324–328
system tasks, 136
tuning NGIPS deployments, 281
UDP-like connections, 53–54
unavailable file disposition, 177
Unified Computing System (UCS), 8
unknown file disposition, 177
update server access, 198
updates
Cisco ASA FirePOWER module, 111–114
deleting older patch files and, 129
intrusion policy rule, 104
upstream server, 150
URL Filtering license, 38–39, 277
515
URLs, access control rules for, 97–98
user and host awareness, 265
username, AMP Threat Grid, 260, 261
variables, NGIPS, 287–289
verbose notifications, 218
virtual next-generation IPS (NGIPSv) appliances, 8, 266
virtual port channel (VPC) links, 273
virtual private networks. See VPNs
viruses, 9
visibility-driven defenses, 3
VMware virtual environment, 151
VPNs (virtual private networks), 24–25
Cisco ASA FirePOWER deployment in, 56–58
protocols used for, 24–25
site-to-site vs. remote-access, 25, 57
vulnerability assessment, 265
vulnerability database (VDB) updates, 111, 112
vulnerability scans, 282
Web Cache Communication Protocol (WCCP), 16, 18
516
Web Proxy Auto-Discovery (WPAD), 251
web security, 16–22
Cloud Web Security, 21–22
Security Management Appliance, 20–21
Web Security Appliance, 16–20
Web Security Appliance. See WSA
Web-Based Reputation Score (WBRS), 184
Websense NTLM credential caching, 251
whaling attacks, 13
whitelists
application, 207–209
correlation, 322, 323
IP address, 205–206
wildcard exclusions, 209
Windows OS
running the ASDM on, 81
workflows
517
custom, 314
event, 310, 313–314
worms, 9
write standby command, 46
writing Snort rules, 297
WSA (Web Security Appliance), 16–20
AMP report from, 192–193
configuring for AMP, 185–188
explicit proxy configuration, 17
transparent proxy configuration, 17
WCCP registration process, 18
WSA models list, 19
zip files, 178
518
Code Snippets
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
Table of Contents
Cover Page 1
About This E-Book 2
Title Page 3
Copyright Page 4
About the Authors 8
About the Technical Reviewers 12
Dedications 13
Acknowledgments 14
Contents at a Glance 15
Contents 16
Introduction 28
Chapter 1. Fundamentals of Cisco Next-Generation
32
Security
Chapter 2. Introduction to and Design of Cisco ASA with
65
FirePOWER Services
Chapter 3. Configuring Cisco ASA with FirePOWER
114
Services
Chapter 4. Troubleshooting Cisco ASA with FirePOWER
192
Services and Firepower Threat Defense (FTD)
Chapter 5. Introduction to and Architecture of Cisco
222
AMP
Chapter 6. Cisco AMP for Networks 262
Chapter 7. Cisco AMP for Content Security 275
Chapter 8. Cisco AMP for Endpoints 291
Chapter 9. AMP Threat Grid: Malware Analysis and
376
Threat Intelligence
Chapter 10. Introduction to and Deployment of Cisco
385
Next-Generation IPS
546
Chapter 11. Configuring Cisco Next-Generation IPS 412
Chapter 12. Reporting and Troubleshooting with Cisco
439
Next-Generation IPS
Index 465
Code Snippets 519
Images 531
Images 545
547

Cisco Next-Generation Security Solutions All-In-One Cisco ASA Firepower Services, NGIPS, and AMP

Uploaded by

Copyright:

Available Formats

Cisco Next-Generation Security Solutions All-In-One Cisco ASA Firepower Services, NGIPS, and AMP

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cisco Next-Generation Security Solutions All-In-One Cisco ASA Firepower Services, NGIPS, and AMP

Uploaded by

Copyright:

Available Formats

What is the book about?

What is the book about?

What are some of the main components discussed in the book?

What are some of the main components discussed in the book?

1

About This E-Book

Many titles include programming code or configuration examples. To

Omar Santos, CISSP No. 463598

800 East 96th Street

Omar Santos, CISSP No. 463598

Panos Kampanakis, CCIE No. 28561, CISSP No. 367831

Aaron Woland, CCIE No. 20113

Copyright © 2017 Cisco Systems, Inc.

Cisco Press logo is a trademark of Cisco Systems, Inc.

All rights reserved. No part of this book may be reproduced or transmitted

Printed in the United States of America

First Printing: June, 2016

Library of Congress Control Number: 2016939800

Warning and Disclaimer

This book is designed to provide information about Cisco Next-Generation

Readers’ feedback is a natural continuation of this process. If you have any

We greatly appreciate your assistance.

Editor-in-Chief: Mark Taub

Product Line Manager: Brett Bartow

Executive Editor: Mary Beth Ray

Development Editor: Christopher Cleveland

Copy Editor: Kitty Wilson

Indexer: James Minkin

Business Operation Manager, Cisco Press: Jan Cornelssen

Managing Editor: Sandra Schroeder

Senior Project Editor: Tracey Croom

Technical Editors: Mason Harris, Foster Lipkey

Composition: Bumpy Design

Proofreader: Kim Wimpsett

Asia Pacific Headquarters

Omar is an active member of the security community, where he leads

Cisco ASA: All-in-One Firewall, IPS, and VPN Adaptive Security

Cisco: All-in-One ASA Next-Generation Firewall, IPS, and VPN

Cisco Network Admission Control, Volume: Deployment and

End-to-End Network Security: Defense-in-Depth

CCNA Security 210-260 Official Cert Guide

Deploying Next-Generation Firewalls LiveLessons

The Current Security Threat Landscape Networking Talks LiveLessons

Cisco Advanced Malware Protection (AMP) LiveLessons

Panos Kampanakis, CCIE No. 28561, CISSP No. 367831, is a technical

Panos has extensive experience with cryptography, security automation,

Postquantum Preshared Keys for IKEv2 IETF draft

BAFi: A Practical Cryptographic Secure Audit Logging Scheme for

Eric W. Burger, Michael D. Goodman, Panos Kampanakis, and Kevin A.

“Security Automation and Threat Information-Sharing Options, Security &

IODEF Usage Guidance IETF draft https://tools.ietf.org/html/draft-ietf-

Next Generation Encryption on cisco.com

Cisco Firewall Best Practices Guide on cisco.com

Aaron Woland, CCIE No. 20113, is a principal engineer in Cisco’s

CCNP Security SISAS 300-208 Official Cert Guide

Cisco ISE for BYOD and Secure Unified Access

Chapter 1 Fundamentals of Cisco Next-Generation Security

Chapter 2 Introduction to and Design of Cisco ASA with FirePOWER

Chapter 3 Configuring Cisco ASA with FirePOWER Services