Scribd
Upload
119 views2 pages

Airmar P319

The document describes low-profile through-hull transducers from Airmar featuring a dual-frequency ceramic element in plastic or bronze housings. The transducers minimize drag with only 5mm extending outside the hull and are suitable for planing powerboats and sailboats from 8 meters and up.

Uploaded by

Seafar Yachting
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views2 pages

Airmar P319

The document describes low-profile through-hull transducers from Airmar featuring a dual-frequency ceramic element in plastic or bronze housings. The transducers minimize drag with only 5mm extending outside the hull and are suitable for planing powerboats and sailboats from 8 meters and up.

Uploaded by

Seafar Yachting
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

P319

B117

Minimize Your Drag Thru-Hull


The P319 and B117 feature Airmar’s 50/200 kHz,
dual-frequency, single-ceramic element in a low-profile housing. Low-Profile
Plastic and bronze models are available to accommodate all hull
types. The nearly flush design minimizes drag with only 5 mm 600 W
(2/10”) extending outside the hull.

Applications
• Planing hull powerboats
• Sailboats

Features
• Industry standard for low-profile transducers
Plastic housing—P319 • Depth only or Depth and temperature
• Good target detail in shallow-water at 200 kHz and
good deep-water bottom tracking at 50 kHz
• Right angle cable exit offers low headroom and
protection when transducer is stepped on
• Included rubber washer allows tightening of the hull
nut to irregular hull surfaces
• Housings are ABYC H-27 compliant
• Optional temperature sensor
• Plastic or bronze housings available
• Boat Size: 8 m (25’) and up

www.airmar.com
P319, B117

Technical Information

50/200 kHz-A DIMENSIONS


Number of Elements
and Configuration
Beamwidth (@-3 dB) 45° 12°
P319 Plastic
RMS Power (W) 600 W 600 W
ø 75 mm (2.94”)
TVR 154 dB 164 dB
RVR -179 dB -185 dB
FOM -33 dB -21 dB 2”-12
threads
Q 28 30
94 mm
Impedance 200 Ω 375 Ω (3.72”)

ø 51 mm
MAXIMUM DEPTH RANGE (2.00”)

200 kHz 200 kHz


235 m to 353 m 118 m to 206 m
ø 75 mm (2.94”) 5 mm
(800’ to 1,200’) (400’ to 700’) (0.20”)
B117 Bronze

BEAM DIAMETER VS DEPTH ø 80 mm (3.13”)

Depth 50 kHz 200 kHz


9 m (30’) 8 m (25’) 2 m (6’) 2”-12
threads
30 m (100’) 25 m (83’) 6 m (21’)
94 mm
122 m (400’) 101 m (331’) 26 m (84’) (3.72”)
305 m (1,000’) 252 m (828’) 64 m (210’)
ø 51 mm
(2.00”)
SPECIFICATIONS
Weight:
Plastic—0.6 kg (1.3 lb) ø 75 mm (2.94”) 5 mm
Bronze—0.9 kg (2.0 lb) (0.20”)
Hull Deadrise: Up to 24°
Acoustic Window: Urethane
Hole Diameter: 51 mm (2”)

©Airmar Technology Corporation P319_B117_rA 07/18/11

As Airmar constantly improves its products, all specifications are subject to change without
notice. All Airmar products are designed to provide high levels of accuracy and reliability,
however they should only be used as aids to navigation and not as a replacement for
traditional navigation aids and techniques. Other company or product names mentioned in
this document may be trademarks or registered trademarks of their respective companies,
which are not affiliated with Airmar.

You might also like