Physics Syllabus

Physics
Stage 6
Syllabus
Amended October 2002

Original published version updated:
June 2004-Board Bulletin/Official Notices Vol 13 no 3 (BOS 34/04) (2005035)
© 2002 Copyright Board of Studies NSW for and on behalf of the Crown in right of the State of New South Wales.
This document contains Material prepared by the Board of Studies NSW for and on behalf of the State of New South
Wales. The Material is protected by Crown copyright.
All rights reserved. No part of the Material may be reproduced in Australia or in any other country by any process,
electronic or otherwise, in any material form or transmitted to any other person or stored electronically in any form
without the prior written permission of the Board of Studies NSW, except as permitted by the Copyright Act 1968.
School students in NSW and teachers in schools in NSW may copy reasonable portions of the Material for the purposes
of bona fide research or study. Teachers in schools in NSW may make multiple copies, where appropriate, of sections of
the HSC papers for classroom use under the provisions of the school’s Copyright Agency Limited (CAL) licence.
When you access the Material you agree:

• to use the Material for information purposes only
• to reproduce a single copy for personal bona fide study use only and not to reproduce any major extract or the entire
Material without the prior permission of the Board of Studies NSW
• to acknowledge that the Material is provided by the Board of Studies NSW
• not to make any charge for providing the Material or any part of the Material to another person or in any way make
commercial use of the Material without the prior written consent of the Board of Studies NSW and payment of the
appropriate copyright fee
• to include this copyright notice in any copy made
• not to modify the Material or any part of the Material without the express prior written permission of the Board of
Studies NSW.
The Material may contain third party copyright materials such as photos, diagrams, quotations, cartoons and artworks.
These materials are protected by Australian and international copyright laws and may not be reproduced or transmitted in
any format without the copyright owner’s specific permission. Unauthorised reproduction, transmission or commercial
use of such copyright materials may result in prosecution.
The Board of Studies has made all reasonable attempts to locate owners of third party copyright material and invites
anyone from whom permission has not been sought to contact the Copyright Officer, ph (02) 9367 8289,
fax (02) 9279 1482.
Published by
Board of Studies NSW
GPO Box 5300
Sydney NSW 2001
Australia
Tel: (02) 9367 8111
Internet: http://www.boardofstudies.nsw.edu.au
ISBN 1 7409 9449 3
2002506
Contents
1 The Higher School Certificate Program of Study ........................................................................ 5
2 Rationale for Physics in the Stage 6 Curriculum ......................................................................... 6
3 Continuum of Learning for Physics Stage 6 Students.................................................................. 7
4 Aim............................................................................................................................................... 8
5 Objectives..................................................................................................................................... 8
6 Course Structure........................................................................................................................... 9
6.1 Preliminary Course............................................................................................................ 9
6.2 HSC Course ..................................................................................................................... 10
6.3 Overview ......................................................................................................................... 11
6.4 Other Considerations ....................................................................................................... 14
7 Objectives and Outcomes........................................................................................................... 15
7.1 Table of Objectives and Outcomes.................................................................................. 15
7.2 Key Competencies........................................................................................................... 17
8 Content: Physics Stage 6 Preliminary Course............................................................................ 18
8.1 Physics Skills................................................................................................................... 18
8.2 The World Communicates............................................................................................... 21
8.3 Electrical Energy in the Home......................................................................................... 26
8.4 Moving About ................................................................................................................. 30
8.5 The Cosmic Engine ......................................................................................................... 35
9 Content: Physics Stage 6 HSC Course ...................................................................................... 38
9.1 Physics Skills................................................................................................................... 38
9.2 Space ............................................................................................................................... 41
9.3 Motors and Generators .................................................................................................... 45
9.4 From Ideas to Implementation......................................................................................... 49
9.5 Option — Geophysics ..................................................................................................... 54
9.6 Option — Medical Physics.............................................................................................. 58
9.7 Option — Astrophysics ................................................................................................... 62
9.8 Option — From Quanta to Quarks .................................................................................. 66
9.9 Option — The Age of Silicon ......................................................................................... 70
10 Course Requirements ................................................................................................................. 75
11 Post-school Opportunities .......................................................................................................... 76
12 Assessment and Reporting ......................................................................................................... 77
12.1 Requirements and Advice................................................................................................ 77
12.2 Internal Assessment......................................................................................................... 78
12.3 External Examination ...................................................................................................... 78
12.4 Board Requirements for the Internal Assessment Mark
in Board Developed Courses ........................................................................................... 79
12.5 Assessment Components, Weightings and Tasks............................................................ 80
12.6 HSC External Examination Specifications...................................................................... 82
12.7 Summary of Internal and External Assessment............................................................... 83
12.8 Reporting Student Performance Against Standards ........................................................ 84
13 Appendix .................................................................................................................................... 85
Physics Stage 6 Syllabus
1 The Higher School Certificate Program of Study

The purpose of the Higher School Certificate program of study is to:
• provide a curriculum structure which encourages students to complete secondary education;
• foster the intellectual, social and moral development of students, in particular developing their:
– knowledge, skills, understanding and attitudes in the fields of study they choose
– capacity to manage their own learning
– desire to continue learning in formal or informal settings after school
– capacity to work together with others
– respect for the cultural diversity of Australian society;
• provide a flexible structure within which students can prepare for:

– further education and training
– employment
– full and active participation as citizens;
• provide formal assessment and certification of students’ achievements;
• provide a context within which schools also have the opportunity to foster students’ physical and
spiritual development.
5
2 Rationale for Physics in the Stage 6 Curriculum

Physics in Science Stage 6 provides students with a contemporary and coherent understanding of energy,
matter, and their interrelationships. It focuses on investigating natural phenomena and then applying patterns,
models (including mathematical ones), principles, theories and laws to explain the physical behaviour of the
universe. It uses an understanding of simple systems (single particles and pairs of particles) to make
predictions about a range of objects from sub-atomic particles to the entire universe and aims to reveal the
simplicity underlying complexity.
The study of physics relies on the understanding and application of a small number of basic laws and
principles that govern the microscopic and macroscopic worlds. The study of physics provides students with
an understanding of systems that is the basis of the development of technological applications. The interplay
between concepts and technological and societal impacts is embodied in the history and philosophy of science
and forms a continuum relating our past to our future.
Physics Stage 6 draws upon and builds on the knowledge and understanding, skills and values and attitudes
developed in Science Stages 4–5. It further develops students’ understanding of science as a continually
developing body of knowledge, the interdisciplinary nature of science, the role of experiment in deciding
between competing theories, the provisional nature of scientific explanations, the complex relationship
between evidence and ideas and the impact of science on society.
The study of physics involves the students working individually and with others in active, practical, field and
interactive media experiences that are related to the theoretical concepts considered in the course. It is
expected that students studying Physics Stage 6 will apply investigative and problem-solving skills,
effectively communicate the theoretical concepts considered in the course and appreciate the contribution that
a study of physics makes to our understanding of the world.
The Physics Stage 6 course is designed for those students who have a substantial achievement level based on
the Science Stages 4–5 course performance descriptors. The subject matter of the Physics course recognises
the different needs and interests of students by providing a structure that builds upon the foundations laid in
Stage 5 yet recognises that students entering Stage 6 have a wide range of abilities, circumstances and
expectations.
6
3 Continuum of Learning for Physics Stage 6 Students
7
4 Aim
Physics Stage 6 aims to provide learning experiences through which students will:
• acquire knowledge and understanding about fundamental concepts related to natural phenomena and
their causes, the historical development of these concepts and their application to personal, social,
economic, technological and environmental situations
• progress from the consideration of specific data and knowledge to the understanding of models and
concepts and the explanation of generalised physics terms; from the collection and organisation of
information to problem-solving; and from the use of simple communication skills to those that are more
sophisticated
• develop positive attitudes towards the study of natural phenomena and their causes and opinions held by
others, recognising the importance of evidence and the use of critical evaluation of differing scientific
opinions related to various aspects of physics.
5 Objectives
Students will develop knowledge and understanding of:
1. the history of physics
2. the nature and practice of physics
3. applications and uses of physics
4. the implications of physics for society and the environment
5. current issues, research and developments in physics
6. kinematics and dynamics
7. energy
8. waves
9. fields
10. matter.
Students will develop further skills in:

11. planning investigations
12. conducting investigations
13. communicating information and understanding
14. developing scientific thinking and problem-solving techniques
15. working individually and in teams.
Students will develop positive values about and attitudes towards:

16. themselves, others, learning as a lifelong process, physics and the environment.
8
6 Course Structure
This Physics Stage 6 Syllabus has a Preliminary course and an HSC course. The Preliminary and HSC courses
are organised into a number of modules. The Preliminary modules consist of core content that will be covered
in 120 indicative hours.
The HSC course consists of core and options organised into a number of modules. The core content covers 90
indicative hours with options covering 30 indicative hours. Students are required to complete one of the
options.
Practical experiences are an essential component of both the Preliminary and HSC courses. Students will
complete 80 indicative hours of practical/field work during the Preliminary and HSC courses with no less than
35 indicative hours of practical experiences in the HSC course. Practical experiences must include at least one
open-ended investigation integrating the knowledge and understanding, and skills outcomes in both the
Preliminary and HSC courses.
Practical experiences should emphasise hands-on activities, including:

• undertaking laboratory experiments, including the use of appropriate computer based and digital
technologies
• fieldwork
• research using a wide range of sources, including print material, the Internet and digital technologies
• the use of computer simulations for modelling or manipulating data
• using and reorganising secondary data
• extracting and reorganising information in the form of flow charts, tables, graphs, diagrams, prose and
keys
• the use of animation, video and film resources that can be used to capture/obtain information not
available in other forms.
6.1 Preliminary Course

120 indicative hours
The Preliminary course incorporates the study of:
• The World Communicates (30 indicative hours)
• Electrical Energy in the Home (30 indicative hours)
• Moving About (30 indicative hours)
• The Cosmic Engine (30 indicative hours)
9
6.2 HSC Course

120 indicative hours
The HSC course builds upon the Preliminary course. The Preliminary course content is a prerequisite for the
HSC course.
The HSC course incorporates the study of:
The core, which includes:

• Space (30 indicative hours)
• Motors and Generators (30 indicative hours)
• From Ideas to Implementation (30 indicative hours)
Options, which constitute 30 indicative hours and include any one of the following:
• Geophysics
• Medical Physics
• Astrophysics
• From Quanta to Quarks
• The Age of Silicon
10
6.3 Overview
The following diagram summarises the relationship between the various elements of the course:
Aim
states the overall purpose of the syllabus
Objectives
define in broad terms, the knowledge and understanding,

skills, and values and attitudes
Outcomes
define the intended results of teaching
Contents of each module

Contexts
to increase motivation,
conceptual meaning,
literacy or confidence
Prescribed Focus Areas Domain
identify emphases that contains knowledge and
are applied to what is understanding, skills, and values
being learned and attitudes to be learned
set within a background of ongoing assessment aimed at assisting students to learn
An independent learner
creative, responsible, scientifically literate, confident, ready to take their

place as a member of society
11
Context
Contexts are frameworks devised to assist students to make meaning of the Prescribed Focus Areas and
Domain. Contexts are culturally bound and therefore communicate meanings that are culturally shaped or
defined. Contexts draw on the framework of society in all aspects of everyday life. The contexts for each
module encourage students to recognise and use their current understanding to further develop and apply more
specialised scientific understanding and knowledge.
Prescribed Focus Areas

The Prescribed Focus Areas are different curriculum emphases or purposes designed to increase students’
understanding of physics as an ever-developing body of knowledge, the provisional nature of scientific
explanations in physics, the complex relationship between evidence and ideas in physics and the impact of
physics on society.
The following Prescribed Focus Areas are developed in this syllabus:

History of physics
Knowledge of the historical background of physics is important to adequately understand natural phenomena
and explain the applications of those phenomena in current technologies. Students should develop knowledge
of:
• the developmental nature of our understanding of energy, matter and their interrelationships
• the part that an understanding of energy, matter and their interrelationships plays in shaping society
• how our understanding of energy, matter and their interrelationships is influenced by society.
Nature and practice of physics
A study of physics should enable students to participate in scientific activities and develop knowledge of the
practice of physics. Students should develop knowledge of the provisional nature of physical explanations and
the complex relationship between:
• existing physical views and the evidence supporting these
• the process and methods of exploring, generating, testing and relating ideas
• the stimulation provided by technological advances and constraints imposed on understanding in physics
by the limitations of current technology that necessitates the development of the required technology and
technological advances.
Applications and uses of physics
Setting the study of physics into broader contexts allows students to deal with real problems and applications.
The study of physics should increase students’ knowledge of:
• the relevance, usefulness and applicability of laws and principles related to physics
• how increases in our understanding in physics have led to the development of useful technologies and
systems
• the contributions physics has made to society, with particular emphasis on Australian achievements.
Implications of physics for society and the environment
Physics has an impact on our society and the environment, and students need to develop knowledge of the
importance of positive values and practices in relation to these. The study of physics should enable students to
develop:
• understanding about the impact and role of physics in society and the environment
• skills in decision-making about issues concerning physics, society and the environment.
12
Current issues, research and developments in physics

Issues and developments related to physics are more readily known and more information is available to
students than ever before. The syllabus should develop students’ knowledge of:
• areas currently being researched in physics
• career opportunities in physics and related fields
• events reported in the media which require an understanding of some aspect of physics.
Domain
Knowledge and understanding

As one of the major disciplines of science, the Physics Stage 6 course presents a particular way of thinking
about the world. It encourages students to use inference, deductive reasoning and creativity. It presumes that
the interrelationships within and between matter and energy in the universe occur in consistent patterns that
can be understood through careful, systematic study.
The course extends the study developed in the Science Stages 4–5 course, particularly in relation to students’
knowledge and understanding of the law of conservation of energy, Newton’s Laws, the wave model, particle
theory of matter, atomic theory, types of energy, types of force, technology and resources.
This course will build upon this fundamental knowledge to increase students’ conceptual understanding of
systems involving energy, force and motion as well as interactions between these systems and the living and
non-living world. The course will assume that students have an elementary knowledge and understanding of
energy, motion, electricity and forces as developed in the Science Stages 4–5 course.
Skills
The Physics Stage 6 course involves the further development of the skills students have developed in the
Science Stages 4–5 course through a range of practical experiences in both the Preliminary and HSC courses.
Practical experiences are an essential component of both the Preliminary and HSC courses. Students will
complete 80 indicative hours of practical/field work across both the Preliminary and HSC courses with
no less than 35 indicative hours of practical experiences in the HSC course. Practical experiences have been
designed to utilise and further develop students’ expertise in each of the following skill areas:
• planning investigations
This involves increasing students’ skills in planning and organising activities, effectively using time and
resources, selecting appropriate techniques, materials, specimens and equipment to complete activities,
establishing priorities between tasks and identifying ways of reducing risks when using laboratory and
field equipment.
• conducting investigations
This involves increasing students’ skills in locating and gathering information for a planned
investigation. It includes increasing students’ skills in performing first-hand investigations, gathering
first-hand data and accessing and collecting information relevant to physics from secondary sources
using a variety of technologies.
• communicating information and understanding
This involves increasing students’ skills in processing and presenting information. It includes increasing
students’ skills in speaking, writing and using nonverbal communication, such as diagrams, graphs and
symbols to convey physical information and understandings. Throughout the course, students become
increasingly efficient and competent in the use of both technical terminology and the form and style
required for written and oral communication in physics.
13
• developing scientific thinking and problem-solving techniques

This involves further increasing students’ skills in clarifying issues and problems relevant to physics,
framing a possible problem-solving process, developing creative solutions, anticipating issues that may
arise, devising appropriate strategies to deal with those issues and working through the issues in a logical
and coherent way.
• working individually and in teams
This involves further increasing students’ skills in identifying a collective goal, defining and allocating
roles and assuming an increasing variety of roles in working as an effective member of a team within the
agreed time frame to achieve the goal. Throughout the course, students will be provided with further
opportunities to improve their ability to communicate and relate effectively with each other in a team.
Values and attitudes
By reflecting about past, present and future involvement of physics with society, students are encouraged to
develop positive values and informed critical attitudes. These include a responsible regard for both the living
and non-living components of the environment, ethical behaviour, a desire for critical evaluation of the
consequences of the applications of physics and recognising their responsibility to conserve, protect and
maintain the quality of all environments for future generations.
Students are encouraged to develop attitudes on which scientific investigations depend such as curiosity,
honesty, flexibility, persistence, critical thinking, willingness to suspend judgement, tolerance of uncertainty
and an acceptance of the provisional status of scientific knowledge. Students need to balance these with
commitment, tenacity, a willingness to take risks, make informed judgements and at times, inflexibility. As
well as knowing something about physics, students also need to value and appreciate physics if they are to
become scientifically literate persons.
6.4 Other Considerations

Safety Issues
Schools have a legal obligation in relation to safety. Teachers will need to ensure that they comply with the
Occupational Health and Safety Act 2000 (NSW), the Occupational Health and Safety Regulations 2001, the
Dangerous Goods Act 1975 (NSW), the Dangerous Goods Regulation 1978 (NSW) and the Hazardous
Substances Regulation 1996 (NSW), as well as system and school requirements in relation to safety when
implementing their programs.
Schools should refer to the resource package Chemical Safety in Schools (DET,1999) to assist them in
meeting their legislative obligations.
Animal Welfare Act

Schools have a legal responsibility in relation to the welfare of animals. All practical activities involving
animals must comply with the Animal Welfare Act 1985 (NSW) as described in the Animals in Schools:
Animal Welfare Guidelines for Teachers produced on behalf of the Schools Animal Care and Ethics
Committee (SACEC) by the NSW Department of the Education and Training.
14
7 Objectives and Outcomes

7.1 Table of Objectives and Outcomes
Objectives Preliminary Course Outcomes HSC Course Outcomes
Students will develop
knowledge and A student : A student :
understanding of :
1. the history of physics P1. outlines the historical H1. evaluates how major
development of major advances in scientific
principles, concepts and understanding and
ideas in physics technology have changed
the direction or nature of
scientific thinking
2. the nature and P2. applies the processes that are H2. analyses the ways in which
Prescribed Focus Area
practice of physics used to test and validate models, theories and laws in
models, theories and laws of physics have been tested and
science with particular validated
emphasis on first-hand
investigations in physics
3. applications and uses P3. assesses the impact of H3. assesses the impact of
of physics particular technological particular advances in
advances on understanding in physics on the development
physics of technologies
4. implications for P4. describes applications of H4. assesses the impacts of
society and the physics which affect society applications of physics on
environment or the environment society and the environment
5. current issues, P5. describes the scientific H5. identifies possible future
research and principles employed in directions of physics
developments in particular areas of research in research
physics physics
6. kinetics and dynamics P6. describes the forces acting on H6. explains events in terms of
an object which causes Newton’s Laws, Law of
changes in its motion Conservation of Momentum
and relativity
7. energy P7. describes the effects of H7. explains the effects of
energy transfers and energy energy transfers and energy
Domain: Knowledge
transformations transformations
8. waves P8. explains wave motions in H8. analyses wave interactions
terms of energy sources and and explains the effects of
the oscillations produced those interactions
9. fields P9. describes the relationship H9. explains the effects of
between force and potential electric, magnetic and
energy in fields gravitational fields
10. matter P10. describes theories and H10. describes the nature of
models in relation to the electromagnetic radiation
origins of matter and relates and matter in terms of the
these to the forces involved particles
15
Objectives Preliminary Course Outcomes HSC Course Outcomes

Students will develop
knowledge and A student : A student :
understanding of :
11. planning P11. identifies and implements H11. justifies the appropriateness
investigations improvements to of a particular investigation
investigation plans plan
12. conducting P12. discusses the validity and H12. evaluates ways in which
investigations reliability of data gathered accuracy and reliability
from first-hand could be improved in
investigations and investigations
secondary sources
Domain: Skills
13. communicating P13. identifies appropriate H13. uses terminology and

information and terminology and reporting reporting styles
understanding styles to communicate appropriately and
information and successfully to
understanding in physics communicate information
and understanding
14. developing scientific P14. draws valid conclusions H14. assesses the validity of
thinking and problem- from gathered data and conclusions from gathered
solving techniques information data and information
15. working individually P15. implements strategies to H15. explains why an
and in teams work effectively as an investigation is best
individual or as a member undertaken individually or
of a team by a team
16. themselves, others, P16. demonstrates positive H16. justifies positive values
learning as a lifelong values about, and attitude about and attitude towards
Domain: Values
process, physics and towards, both the living and both the living and non-
& Attitudes
the environment non-living components of living components of the

the environment, ethical environment, ethical
behaviour and a desire for a behaviour and a desire for
critical evaluation of the critical evaluation of the
consequences of the consequences of the
applications of science applications of science
16
7.2 Key Competencies
Physics Stage 6 provides the context within which to develop general competencies considered essential for
the acquisition of effective, higher-order thinking skills necessary for further education, work and everyday
life.
Key competencies are embedded in the Physics Stage 6 Syllabus to enhance student learning and are explicit
in the objectives and outcomes of the syllabus. The key competencies of collecting, analysing and organising
information and communicating ideas and information reflect core processes of scientific inquiry and the
skills identified in the syllabus assist students to continue to develop their expertise in these areas.
Students work as individuals and as members of groups to conduct investigations and, through this, the key
competencies, planning and organising activities and working with others and in teams, are developed.
During investigations, students use appropriate information technologies and so develop the key competency
of using technology. The exploration of issues and investigation of problems contributes towards students’
development of the key competency solving problems. Finally, when students analyse statistical evidence,
apply mathematical concepts to assist analysis of data and information and construct tables and graphs, they
are developing the key competency using mathematical ideas and techniques.
17
8 Content: Physics Stage 6 Preliminary Course
8.1 Physics Skills

During the Preliminary course, it is expected that students will further develop skills in planning and
conducting investigations, communicating information and understanding, scientific thinking and problem-
solving and working individually and in teams. Each module specifies content through which skill outcomes
can be achieved. Teachers should develop activities based on that content to provide students with
opportunities to develop the full range of skills.
Preliminary Course Content

Outcomes
A student: Students:
P11. identifies and 11.1 identify data sources to:
implements a) analyse complex problems to determine appropriate ways in which each aspect may
improvements to be researched
investigation b) determine the type of data that needs to be collected and explain the qualitative or
plans quantitative analysis that will be required for this data to be useful
c) identify the orders of magnitude that will be appropriate and the uncertainty that may
be present in the measurement of data
d) identify and use correct units for data that will be collected
e) recommend the use of an appropriate technology or strategy for data collection or
information gathering that will assist efficient future analysis
11.2 plan first-hand investigations to:

a) demonstrate the use of the terms ‘dependent’ and ‘independent’ to describe variables
involved in the investigation
b) identify variables that need to be kept constant, develop strategies to ensure that
these variables are kept constant, and demonstrate the use of a control
c) design investigations that allow valid and reliable data and information to be
collected
d) describe and trial procedures to undertake investigations and explain why a
procedure, a sequence of procedures or the repetition of procedures is appropriate
e) predict possible issues that may arise during the course of an investigation and
identify strategies to address these issues if necessary
11.3 choose equipment or resources by:

a) identifying and/or setting up the most appropriate equipment or combination of
equipment needed to undertake the investigation
b) carrying out a risk assessment of intended experimental procedures and identifying
and addressing potential hazards
c) identifying technology that could be used during investigations and determining its
suitability and effectiveness for its potential role in the procedure or investigation
d) recognising the difference between destructive and non-destructive testing of
material and analysing potentially different results from these two procedures
18

Outcomes
P12. discusses the 12.1 perform first-hand investigations by:
validity and a) carrying out the planned procedure, recognising where and when modifications are
reliability of needed and analysing the effect of these adjustments
data gathered b) efficiently undertaking the planned procedure to minimise hazards and wastage of
from first-hand resources
investigations c) disposing carefully and safely of any waste materials produced during the
and secondary investigation
sources d) identifying and using safe work practices during investigations
12.2 gather first-hand information by:

a) using appropriate data collection techniques, employing appropriate technologies,
including data loggers and sensors
b) measuring, observing and recording results in accessible and recognisable forms,
carrying out repeat trials as appropriate
12.3 gather information from secondary sources by:

a) accessing information from a range of resources, including popular scientific
journals, digital technologies and the Internet
b) practising efficient data collection techniques to identify useful information in
secondary sources
c) extracting information from numerical data in graphs and tables as well as from
written and spoken material in all its forms
d) summarising and collating information from a range of resources
e) identifying practising male and female Australian scientists, the areas in which they
are currently working and information about their research
12.4 process information to:

a) assess the accuracy of any measurements and calculations and the relative
importance of the data and information gathered
b) identify and apply appropriate mathematical formulae and concepts
c) best illustrate trends and patterns by selecting and using appropriate methods,
including computer assisted analysis
d) evaluate the validity of first-hand and secondary information and data in relation to
the area of investigation
e) assess the reliability of first-hand and secondary information and data by considering
information from various sources
f) assess the accuracy of scientific information presented in mass media by comparison
with similar information presented in scientific journals
19

Outcomes
P13. identifies 13.1 present information by:
appropriate a) selecting and using appropriate text types or combinations thereof, for oral and
terminology and written presentations
reporting styles b) selecting and using appropriate media to present data and information
to communicate c) selecting and using appropriate methods to acknowledge sources of information
information and d) using symbols and formulae to express relationships and using appropriate units for
understanding in physical quantities
physics e) using a variety of pictorial representations to show relationships and present
information clearly and succinctly
f) selecting and drawing appropriate graphs to convey information and relationships
clearly and accurately
g) identifying situations where use of a curve of best fit is appropriate to present
graphical information
P14. draws valid 14.1 analyse information to:

conclusions a) identify trends, patterns and relationships as well as contradictions in data and
from gathered information
data and b) justify inferences and conclusions
information c) identify and explain how data supports or refutes an hypothesis, a prediction or a
proposed solution to a problem
d) predict outcomes and generate plausible explanations related to the observations
e) make and justify generalisations
f) use models, including mathematical ones, to explain phenomena and/or make
predictions
g) use cause and effect relationships to explain phenomena
h) identify examples of the interconnectedness of ideas or scientific principles
14.2 solve problems by:

a) identifying and explaining the nature of a problem
b) describing and selecting from different strategies, those which could be used to solve
a problem
c) using identified strategies to develop a range of possible solutions to a particular
problem
d) evaluating the appropriateness of different strategies for solving an identified
problem
14.3 use available evidence to:

a) design and produce creative solutions to problems
b) propose ideas that demonstrate coherence and logical progression and include correct
use of scientific principles and ideas
c) apply critical thinking in the consideration of predictions, hypotheses and the results
of investigations
d) formulate cause and effect relationships
20
8.2 The World Communicates

Contextual Outline
Humans are social animals and have successfully communicated through the spoken word, and then, as the
use of written codes developed, through increasingly sophisticated graphic symbols. The use of a hard copy
medium to transfer information in coded form meant that communication was able to cross greater distances
with improved accuracy of information transfer. A messenger was required to carry the information in hard
copy form and this carrier could have been a vehicle or person. There was, however, still a time limit and
several days were needed to get hard copy information from one side of the world to the other.
The discovery of electricity and then the electromagnetic spectrum has led to the rapid increase in the number
of communication devices throughout the twentieth century. The carrier of the information is no longer a
vehicle or person — rather, an increasing range of energy waves is used to transfer the message. The delay in
relaying signals around the world is determined only by the speed of the wave, and the speed and efficiency of
the coding and decoding devices at the departure and arrival points of the message. The time between sending
and receiving messages through telecommunications networks is measured in fractions of a second allowing
almost instantaneous delivery of messages, in spoken and coded forms, around the world.
This module increases students’ understanding of the nature, practice, application and uses of physics and
current issues, research and developments in physics.
Assumed Knowledge
Domain: knowledge and understanding:
c
Refer to the Science Stages 4–5 Syllabus for the following:

5.6.1a identify waves as carriers of energy
5.6.1b qualitatively describe features of waves including frequency, wavelength and speed
5.6.1c give examples of different types of radiation that make up the electromagnetic spectrum and identify
some of their uses
5.6.4a distinguish between the absorption, reflection, refraction and scattering of light and identify
everyday situations where each occurs
5.9.1b identify that some types of electromagnetic radiation are used to provide information about the
universe
5.12c describe some everyday uses and effects of electromagnetic radiation, including applications in
communication technology.
21
Students learn to: Students :
1. The wave model describe the energy transformations perform a first-hand investigation to
can be used to required in one of the following: observe and gather information about
explain how – mobile telephone the transmission of waves in:
current – fax/modem – slinky springs
technologies – radio and television – water surfaces
transfer – ropes
information describe waves as a transfer of energy
or use appropriate computer
disturbance that may occur in one,
simulations
two or three dimensions, depending
on the nature of the wave and the
present diagrammatic information
medium
about transverse and longitudinal
waves, direction of particle movement
identify that mechanical waves require
and the direction of propagation
a medium for propagation while
electromagnetic waves do not
perform a first-hand investigation to
gather information about the
define and apply the following terms
frequency and amplitude of waves
to the wave model: medium,
using an oscilloscope or electronic
displacement, amplitude, period,
data-logging equipment
compression, rarefaction, crest,
trough, transverse waves, longitudinal
present and analyse information from
waves, frequency, wavelength,
displacement-time graphs for
velocity
transverse wave motion
describe the relationship between
plan, choose equipment for and
particle motion and the direction of
perform a first-hand investigation to
energy propagation in transverse and
gather information to identify the
longitudinal waves
relationship between the frequency
and wavelength of a sound wave
quantify the relationship between
travelling at a constant velocity
velocity, frequency and wavelength
for a wave: solve problems and analyse
v = fλ information by applying the
mathematical model of
v = fλ
to a range of situations
22
Students learn to: Students:
2. Features of a wave identify that sound waves are perform a first-hand investigation and
model can be used vibrations or oscillations of particles gather information to analyse sound
to account for the in a medium waves from a variety of sources using
properties of sound the Cathode Ray Oscilloscope (CRO)
relate compressions and rarefactions or an alternate computer technology
of sound waves to the crests and
troughs of transverse waves used to perform a first-hand investigation,
represent them gather, process and present
information using a CRO or computer
explain qualitatively that pitch is to demonstrate the principle of
related to frequency and volume to superposition for two waves travelling
amplitude of sound waves in the same medium
explain an echo as a reflection of a present graphical information, solve

sound wave problems and analyse information
involving superposition of sound
describe the principle of superposition waves
and compare the resulting waves to
the original waves in sound
23
3. Recent describe electromagnetic waves in plan, choose equipment or resources

technological terms of their speed in space and their for and perform a first-hand
developments have lack of requirement of a medium for investigation and gather information
allowed greater use propagation to model the inverse square law for
of the light intensity and distance from the
electromagnetic identify the electromagnetic source
spectrum wavebands filtered out by the
atmosphere, especially UV, X-rays analyse information to identify the
and gamma rays waves involved in the transfer of
energy that occurs during the use of
identify methods for the detection of one of the following:
various wavebands in the – mobile phone
electromagnetic spectrum
– television
– radar
explain that the relationship between
the intensity of electromagnetic analyse information to identify the
radiation and distance from a source is electromagnetic spectrum range
an example of the inverse square law: utilised in modern communication
technologies
1
I∝
d2
outline how the modulation of
amplitude or frequency of visible
light, microwaves and/or radio waves
can be used to transmit information
discuss problems produced by the

limited range of the electromagnetic
spectrum available for communication
purposes
24
4. Many describe and apply the law of perform first-hand investigations and
communication reflection and explain the effect of gather information to observe the path
technologies use reflection from a plane surface on of light rays and construct diagrams
applications of waves indicating both the direction of travel
reflection and of the light rays and a wave front
refraction of describe ways in which applications of
electromagnetic reflection of light, radio waves and present information using ray
waves microwaves have assisted in diagrams to show the path of waves
information transfer reflected from:
– plane surfaces
describe one application of reflection – concave surfaces
for each of the following: – convex surface
– plane surfaces – the ionosphere
– concave surfaces
– convex surfaces perform an investigation and gather
– radio waves being reflected by the information to graph the angle of
ionosphere incidence and refraction for light
encountering a medium change
explain that refraction is related to the showing the relationship between
velocities of a wave in different media these angles
and outline how this may result in the
bending of a wavefront perform a first-hand investigation and
gather information to calculate the
define refractive index in terms of refractive index of glass or perspex
changes in the velocity of a wave in
passing from one medium to another solve problems and analyse
information using Snell’s Law
define Snell’s Law:
v1 sini
=
v2 sinr
identify the conditions necessary for
total internal reflection with reference
to the critical angle
outline how total internal reflection is

used in optical fibres
5. Electromagnetic identify types of communication data identify data sources, gather, process
waves have that are stored or transmitted and present information from
potential for future in digital form secondary sources to identify areas of
communication current research and use the available
technologies and evidence to discuss some of the
data storage underlying physical principles used in
technologies one application of physics related to
waves, such as:
– Global Positioning System
– CD technology
– the internet (digital process)
– DVD technology
25
8.3 Electrical Energy in the Home

Contextual Outline
Electricity is an essential energy source for modern living. Disruption to supply or isolation can lead to the
development of alternative methods of obtaining this essential energy resource. For electrical energy to be
useful it must be harnessed through the use of an electrical circuit and an energy-converting appliance.
As electricity became increasingly used as the main power supply in homes and electrical appliances became
an integral part of daily life for many Australians, the dangers associated with electricity became more
prominent. Voltages as low as 20 volts can be dangerous to the human body depending on the health of the
person and length of time of contact with the current. Safety devices in household appliances and within the
electric circuits in the home can prevent electrical injury or assist in reducing the potential for electric shock.
This module increases students’ understanding of the history, nature and practice of physics and the
applications and uses of physics.
Assumed Knowledge

5.6.3a design, construct and draw circuits containing a number of components
5.6.3b describe voltage, resistance and current using analogies
5.6.3c describe qualitatively, the relationship between voltage, resistance and current
5.6.3d compare advantages and disadvantages of series and parallel circuits
1. Society has become discuss how the main sources of identify data sources, gather, process
increasingly domestic energy have changed over and analyse secondary information
dependent on time about the differing views of Volta and
electricity over the Galvani about animal and chemical
last 200 years assess some of the impacts of changes electricity and discuss whether their
in, and increased access to, sources of different views contributed to
energy for a community increased understanding of electricity
discuss some of the ways in which

electricity can be provided in remote
locations
26
2. One of the main describe the behaviour of electrostatic present diagrammatic information to
advantages of charges and the properties of the fields describe the electric field strength and
electricity is that is associated with them direction:
can be moved with – between charged parallel plates
comparative ease define the unit of electric charge as the – about and between a positive and
from one place to coulomb negative point charge
another through
define the electric field as a field of solve problems and analyse
electric circuits
force with a field strength equal to the information using:
force per unit charge at that point: F
E=
F q
E=
q
define electric current as the rate at plan, choose equipment for and
which charge flows (coulombs/ perform a first-hand investigation to
second or amperes) under the gather data and use the available
influence of an electric field evidence to show the relationship
between voltage across and current in
identify that current can be either a DC circuit
direct with the net flow of charge
carriers moving in one direction or solve problems and analyse
alternating with the charge carriers information applying:
moving backwards and forwards V
periodically R=
I
describe electric potential difference plan, choose equipment for and
(voltage) between two points as the perform a first-hand investigation to
change in potential energy per unit gather data and use the available
charge moving from one point to the evidence to show the variations in
other (joules/coulomb or volts) potential difference between different
points around a DC circuit
discuss how potential difference
changes at different points around a gather and process secondary
DC circuit information to identify materials that
are commonly used as conductors to
identify the difference between provide household electricity
conductors and insulators
define resistance as the ratio of

voltage to current for a particular
conductor:
V
R=
I
describe qualitatively how each of the
following affects the movement of
electricity through a conductor:
– length
– cross sectional area
– temperature
– material
27
3. Series and parallel identify the difference between series plan, choose equipment or resources
circuits serve and parallel circuits for and perform first-hand
different purposes investigations to gather data and use
in households compare parallel and series circuits in available evidence to compare
terms of voltage across components measurements of current and voltage
and current through them in series and parallel circuits in
computer simulations or hands-on
identify uses of ammeters and equipment
voltmeters
plan, choose equipment or resources
explain why ammeters and voltmeters and perform a first-hand investigation
are connected differently in a circuit to construct simple model household
circuits using electrical components
explain why there are different
circuits for lighting, heating and other
appliances in a house
4. The amount of explain that power is the rate at which perform a first-hand investigation,
power is related to energy is transformed from one form gather information and use available
the rate at which to another evidence to demonstrate the
energy is relationship between current, voltage
transformed identify the relationship between and power for a model 6V to 12V
power, potential difference and electric heating coil
current
solve problems and analyse
identify that the total amount of information using:
energy used depends on the length of P=VI
time the current is flowing and can be
calculated using: and
Energy = VIt Energy = VIt
explain why the kilowatt-hour is used
to measure electrical energy
consumption rather than the joule
28
5. Electric currents describe the behaviour of the magnetic plan, choose equipment or resources
also produce poles of bar magnets when they are for, and perform a first-hand
magnetic fields and brought close together investigation to build an
these fields are electromagnet
used in different define the direction of the magnetic
devices in the field at a point as the direction of perform a first-hand investigation to
home force on a very small north magnetic observe magnetic fields by mapping
pole when placed at that point lines of force:
– around a bar magnet
describe the magnetic field around – surrounding a straight DC
pairs of magnetic poles current-carrying conductor
– a solenoid
describe the production of a magnetic – present information using ⊗ and •
field by an electric current in a to show the direction of a current
straight current-carrying conductor and direction of a magnetic field
and describe how the right hand grip
rule can determine the direction of identify data sources, gather, process
current and field lines and analyse information to explain
one application of magnetic fields in
compare the nature and generation of household appliances
magnetic fields by solenoids and a bar
magnet
6. Safety devices are discuss the dangers of an electric

important shock from both a 240 volt AC mains
in household supply and various DC voltages, from
circuits appliances, on the muscles of the body
describe the functions of circuit

breakers, fuses, earthing, double
insulation and other safety devices in
the home
29
8.4 Moving About
Contextual Outline
Increased access to transport is a feature of today’s society. Most people access some form of transport for
travel to and from school or work and for leisure outings at weekends or on holidays. When describing
journeys that they may have taken in buses or trains, they usually do so in terms of time or their starting point
and their destination. When describing trips they may have taken in planes or cars, they normally use the time
it takes, distance covered or the speed of the vehicle as their reference points. While distance, time and speed
are fundamental to the understanding of kinematics and dynamics, very few people consider a trip in terms of
energy, force or the momentum associated with the vehicle, even at low or moderate speeds.
The faster a vehicle is travelling, the further it will go before it is able to stop when subject to a constant
retarding force. Major damage can be done to other vehicles and to the human body in collisions, even at low
speeds. This is because during a collision some or all of the vehicle’s kinetic energy is dissipated through the
vehicle and the object with which it collides. Further, the materials from which vehicles are constructed do not
deform or bend as easily as the human body. Technological advances and systematic study of vehicle crashes
have increased understanding of the interactions involved, the potential resultant damage and possible ways of
reducing the effects of collisions. There are many safety devices now installed in or on vehicles, including seat
belts and air bags. Modern road design takes into account ways in which vehicles can be forced to reduce their
speed.
This module increases students’ understanding of the nature and practice of physics and the implications of
physics for society and the environment.
Assumed Knowledge

5.6.2a describe qualitatively the relationship between force, mass and acceleration
5.6.2b explain qualitatively the relationship between distance, speed and time
5.6.2c relate qualitatively acceleration to change in speed and/or direction as
a result of a net force
5.6.2d analyse qualitatively common situations involving motion in terms
of Newton’s Laws.
30
1. Vehicles do not identify that a typical journey involves plan, choose equipment or resources
typically travel at a speed changes for, and perform a first-hand
constant speed investigation to measure the average
distinguish between the instantaneous speed of an object or a vehicle
and average speed of vehicles and
other bodies solve problems and analyse
information using the formula :
distinguish between scalar and vector
quantities in equations ∆r
vav =
∆t
compare instantaneous and average where r = displacement
speed with instantaneous and average
velocity present information graphically of:
define average velocity as: – displacement vs time
– velocity vs time
∆r
vav = for objects with uniform and non-
∆t uniform linear velocity
31

2. An analysis of the describe the motion of one body analyse the effects of external forces
external forces on relative to another operating on a vehicle
vehicles helps to
understand the identify the usefulness of using vector gather first-hand information about
effects of diagrams to assist solving problems different situations where acceleration
acceleration and is positive or negative
deceleration explain the need for a net external
force to act in order to change the plan, choose equipment or resources
velocity of an object for and perform a first-hand
investigation to demonstrate vector
describe the actions that must be taken addition and subtraction
for a vehicle to change direction,
speed up and slow down solve problems using vector diagrams
to determine resultant velocity,
describe the typical effects of external acceleration and force
forces on bodies including:
– friction between surfaces plan, choose equipment or resources
– air resistance and perform first-hand investigations
to gather data and use available
define average acceleration as: evidence to show the relationship
∆v between force, mass and acceleration
aav = using suitable apparatus
∆t
therefore solve problems and analyse
v −u information using:
aav =
t
∑ F = ma
define the terms ‘mass’ and ‘weight’ for a range of situations involving
with reference to the effects of gravity modes of transport
outline the forces involved in causing solve problems and analyse

a change in the velocity of a vehicle information involving
when: mv2
– coasting with no pressure on the F=
r
accelerator for vehicles travelling around curves
– pressing on the accelerator
– pressing on the brakes
– passing over an icy patch on the
road
– climbing and descending hills
– following a curve in the road
interpret Newton’s Second Law of
Motion and relate it to the equation:
∑ F = ma
identify the net force in a wide variety
of situations involving modes of
transport and explain the
consequences of the application of
that net force in terms of Newton’s
Second Law of Motion
32
3. Moving vehicles identify that a moving object solve problems and analyse
have kinetic energy possesses kinetic energy and that information to determine the kinetic
and energy work done on that object can increase energy of a vehicle and the work done
transformations that energy using the formulae:
are an important 1 2
aspect in describe the energy transformations Ek = mv
2
understanding that occur in collisions
motion and
define the law of conservation of
W=Fs
energy
analyse information to trace the

energy transfers and transformation in
collisions leading to irreversible
distortions
4. Change of define momentum as: solve problems and analyse secondary

momentum relates p = mv data using:
to the forces acting p = mv
on the vehicle or define impulse as the product of force
the driver and time and
Impulse = Ft
explain why momentum is conserved
in collisions in terms of Newton’s perform first-hand investigations to
Third Law of motion gather data and analyse the change in
momentum during collisions
solve problems that apply the principle

of conservation of momentum to
qualitatively and quantitatively
describe the collision of a moving
vehicle with:
– a stationary vehicle
– an immoveable object
– another vehicle moving in the
opposite direction
– another vehicle moving in the
same direction
33
5. Safety devices are define the inertia of a vehicle as its gather and process first-hand data
utilised to reduce tendency to remain in uniform motion and/or secondary information to
the effects of or at rest analyse the potential danger presented
changing by loose objects in a vehicle
momentum discuss reasons why Newton’s First
Law of Motion is not apparent in identify data sources, gather, process,
many real world situations analyse, present secondary
information and use the available
assess the reasons for the introduction evidence to assess benefits of
of low speed zones in built-up areas technologies for avoiding or reducing
and the addition of air bags and the effect of a collision
crumple zones to vehicles with respect
to the concepts of impulse and
momentum
evaluate the effectiveness of some

safety features of motor vehicles
34
8.5 The Cosmic Engine

Contextual Outline
The Universe began with a singularity in space-time. After the initial explosion, the Universe started to
expand, cool and condense, forming matter. As part of this ongoing process the Sun and the Solar System
were formed over 4x109 years ago from a gas cloud which resulted from a supernova explosion. The
condensing gas and dust that formed the Sun and the planets contained all its original elements. The planets
were formed when matter came together under the influence of gravity.
This module increases students’ understanding of the history of physics, implications of physics for society
and the environment and current issues, research and developments in physics.
Assumed Knowledge

5.6.5a identify that energy may be released from the nuclei of atoms
5.7.1a describe the features and location of protons, neutrons and electrons
in the atom
5.9.1a discuss current scientific thinking about the origin of the Universe
5.9.1c describe some of the difficulties in obtaining information about the Universe
5.9.3a relate some major features of the Universe to theories about the formation
of the Universe
5.9.3b describe some changes that are likely to take place during the life of a star.
1. Our Sun is just one outline the historical development of identify data sources, and gather,
star in the galaxy models of the Universe from the time process and analyse information to
and ours is just of Aristotle to the time of Newton assess one of the models of the
one galaxy in the Universe developed from the time of
Universe Aristotle to the time of Newton to
identify limitations placed on the
development of the model by the
technology available at the time
35
2. The first minutes outline the discovery of the expansion identify data sources and gather
of the Universe of the Universe by Hubble, following secondary information to describe the
released energy its earlier prediction by Friedmann probable origins of the Universe
which changed to
matter, forming describe the transformation of
stars and galaxies radiation into matter which followed
the ‘Big Bang’
identify that Einstein described the

equivalence of energy and mass
outline how the accretion of galaxies

and stars occurred through:
– expansion and cooling of the
Universe
– subsequent loss of particle kinetic
energy
– gravitational attraction between
particles
– lumpiness of the gas cloud that
then allows gravitational collapse
3. Stars have a define the relationship between the gather secondary information to relate
limited life span temperature of a body and the brightness of an object to its
and may explode dominant wavelength of the radiation luminosity and distance
to form supernovas emitted from that body
solve problems to apply the inverse
identify that the surface temperature square law of intensity of light to
of a star is related to its colour relate the brightness of a star to its
luminosity and distance from the
describe a Hertzsprung-Russell observer
diagram as the graph of a star’s
luminosity against its colour or process and analyse information using
surface temperature the Hertzsprung-Russell diagram to
examine the variety of star groups,
identify energy sources characteristic including Main Sequence, red giants,
of each star group, including Main and white dwarfs
Sequence, red giants, and white
dwarfs
36
4. The Sun is a identify that energy may be released perform a first-hand investigation to
typical star, from the nuclei of atoms gather information to compare the
emitting penetrating power of alpha, beta and
electromagnetic describe the nature of emissions from gamma radiation in a range of
radiation and the nuclei of atoms as radiation of materials
particles that alpha α and beta β particles and
identify data sources, gather and
influence the Earth gamma γ rays in terms of:
process information and use available
– ionising power
evidence to assess the effects of
– penetrating power
sunspot activity on the Earth’s power
– effect of magnetic field
grid and satellite communications
– effect of electric field
identify the nature of emissions
reaching the Earth from the Sun
describe the particulate nature of the

solar wind
outline the cyclic nature of sunspot

activity and its impact on Earth
through solar winds
describe sunspots as representing

regions of strong magnetic activity
and lower temperature
37
9 Content: Physics Stage 6 HSC Course

9.1 Physics Skills
During the HSC course, it is expected that students will further develop skills in planning and conducting
investigations, communicating information and understanding, scientific thinking and problem solving and
working individually and in teams. Each module specifies content through which skill outcomes can be
achieved. Teachers should develop activities based on that content to provide students with opportunities to
develop the full range of skills.
HSC Course Outcomes Content

H11. justifies the 11.1 identify data sources to:
appropriateness of a a) analyse complex problems to determine appropriate ways in which each aspect
particular may be researched
investigation plan b) determine the type of data that needs to be collected and explain the qualitative
or quantitative analysis that will be required for this data to be useful
c) identify the orders of magnitude that will be appropriate and the uncertainty
that may be present in the measurement of data
d) identify and use correct units for data that will be collected
e) recommend the use of an appropriate technology or strategy for data collection
or information gathering that will assist efficient future analysis
11.2 plan first-hand investigations to:
a) demonstrate the use of the terms ‘dependent‘ and ‘independent‘ to describe
variables involved in the investigation
b) identify variables that needed to be kept constant, develop strategies to ensure
that these variables are kept constant,
and demonstrate the use of a control
c) design investigations that allow valid and reliable data and information to be
collected
d) describe and trial procedures to undertake investigations and explain why a
procedure, a sequence of procedures or the repetition of procedures is
appropriate
e) predict possible issues that may arise during the course of
an investigation and identify strategies to address these issues
if necessary
11.3 choose equipment or resources by:
a) identifying and/or setting up the most appropriate equipment or combination
of equipment needed to undertake the investigation
b) carrying out a risk assessment of intended experimental procedures and
identifying and addressing potential hazards
c) identifying technology that would be used during investigation determining its
suitability and effectiveness for its potential role
in the procedure or investigation
d) recognising the difference between destructive and non-destructive testing of
material and analysing potentially different results from these two procedures
38

H12. evaluates ways in 12.1 perform first-hand investigations by:
which accuracy and a) carrying out the planned procedure, recognising where and when
reliability could be modifications are needed and analysing the effect of
improved in these adjustments
investigations b) efficiently undertaking the planned procedure to minimise hazards and
wastage of resources
c) disposing carefully and safely of any waste materials produced during the
investigation
d) identifying and using safe work practices during investigations
12.2 gather first-hand information by:
a) using appropriate data collection techniques, employing appropriate
technologies, including data loggers and sensors
b) measuring, observing and recording results in accessible and recognisable
forms, carrying out repeat trials as appropriate
12.3 gather information from secondary sources by:
a) accessing information from a range of resources, including popular scientific
journals, digital technologies and the Internet
b) practising efficient data collection techniques to identify useful information in
secondary sources
c) extracting information from numerical data in graphs and tables as well as
written and spoken material in all its forms
d) summarising and collating information from a range of resources
e) identifying practising male and female Australian scientists, and the areas in
which they are currently working and in formation about their research
12.4 process information to:
a) assess the accuracy of any measurements and calculations and the relative
importance of the data and information gathered
b) identify and apply appropriate mathematical formulae and concepts
c) best illustrate trends and patterns by selecting and using appropriate methods,
including computer assisted analysis
d) evaluate the validity of first-hand and secondary information and data in
relation to the area of investigation
e) assess the reliability of first-hand and secondary information and data by
considering information from various sources
f) assess the accuracy of scientific information presented in mass media by
comparison with similar information presented in scientific journals
39

H13. uses terminology 13.1 present information by:
reporting styles a) selecting and using appropriate text types or combinations thereof, for oral
appropriately and and written presentations
successfully to b) selecting and using appropriate media to present data and information
communicate c) selecting and using appropriate methods to acknowledge sources of
information and information
understanding d) using symbols and formulae to express relationships and using appropriate
units for physical quantities
e) using a variety of pictorial representations to show relationships and present
information clearly and succinctly
f) selecting and drawing appropriate graphs to convey information and
relationships clearly and accurately
g) identifying situations where use of a curve of best fit is appropriate to present
graphical information
H14. assesses the validity of 14.1 analyse information to:
conclusions drawn a) identify trends, patterns and relationships as well as contradictions in data and
from gathered data and information
information b) justify inferences and conclusions
c) identify and explain how data supports or refutes an hypothesis, a prediction
or a proposed solution to a problem
d) predict outcomes and generate plausible explanations related to the
observations
e) make and justify generalisations
f) use models, including mathematical ones, to explain phenomena and/or make
predictions
g) use cause and effect relationships to explain phenomena
h) identify examples of the interconnectedness of ideas or scientific principles
14.2 solve problems by:
a) identifying and explaining the nature of a problem
b) describing and selecting from different strategies, those which could be used
to solve a problem
c) using identified strategies to develop a range of possible solutions to a
particular problem
d) evaluating the appropriateness of different strategies for solving an identified
problem
14.3 use available evidence to:
a) design and produce creative solutions to problems
b) propose ideas that demonstrate coherence and logical progression and include
correct use of scientific principles and ideas
c) apply critical thinking in the consideration of predictions, hypotheses and the
results of investigations
d) formulate cause and effect relationships
40
9.2 Space
Contextual Outline
Scientists have drawn on advances in areas such as aeronautics, material science, robotics, electronics,
medicine and energy production to develop viable spacecraft. Perhaps the most dangerous parts of any space
mission are the launch, re-entry and landing. A huge force is required to propel the rocket a sufficient distance
from the Earth so that it is able to either escape the Earth’s gravitational pull or maintain an orbit. Following a
successful mission, re-entry through the Earth’s atmosphere provides further challenges to scientists if
astronauts are to return to Earth safely.
Rapid advances in technologies over the past fifty years have allowed the exploration of not only the Moon,
but the Solar System and, to an increasing extent, the Universe. Space exploration is becoming more viable.
Information from research undertaken in space programs has impacted on society through the development of
devices such as personal computers, advanced medical equipment and communication satellites, and has
enabled the accurate mapping of natural resources. Space research and exploration increases our
understanding of the Earth’s own environment, the Solar System and the Universe.
implications of physics for society and the environment.
1. The Earth has a define weight as the force on an object perform an investigation and gather
gravitational field due to a gravitational field information to determine a value for
that exerts a force acceleration due to gravity using
on objects both on explain that a change in gravitational pendulum motion or computer-
it and around it potential energy is related to work assisted technology and identify
done reason for possible variations from the
-2
value 9.8 ms
define gravitational potential energy
as the work done to move an object gather secondary information to
from a very large distance away to a predict the value of acceleration due
point in a gravitational field to gravity on other planets
m1m2
Ep = − G analyse information using the
r
expression:
F = mg
to determine the weight force for a
body on Earth and for the same body
on other planets
41
2. Many factors describe the trajectory of an object solve problems and analyse
have to be taken undergoing projectile motion within information to calculate the actual
into account to the Earth’s gravitational field in terms velocity of a projectile from its
achieve a of horizontal and vertical components horizontal and vertical components
successful rocket using :
launch, maintain describe Galileo’s analysis of
a stable orbit and projectile motion v2x = u2x
return to Earth v = u + at
explain the concept of escape velocity 2 2
in terms of the: v y = u y + 2a y ∆y
– gravitational constant ∆x = u x t
– mass and radius of the planet
1
outline Newton’s concept of escape ∆y = u yt + a y t 2
2
velocity
perform a first-hand investigation,
identify why the term ‘g forces’ is gather information and analyse data to
used to explain the forces acting on an calculate initial and final velocity,
astronaut during launch maximum height reached, range and
time of flight of a projectile for a
discuss the effect of the Earth‘s orbital range of situations by using
motion and its rotational motion on simulations, data loggers and
the launch of a rocket computer analysis
analyse the changing acceleration of a identify data sources, gather, analyse

rocket during launch in terms of the: and present information on the
– Law of Conservation of contribution of one of the following to
Momentum the development of space exploration:
– forces experienced by astronauts Tsiolkovsky, Oberth, Goddard,
Esnault-Pelterie, O’Neill or von
analyse the forces involved in uniform Braun
circular motion for a range of objects,
including satellites orbiting the Earth solve problems and analyse
information to calculate the
compare qualitatively low Earth and centripetal force acting on a satellite
geo-stationary orbits undergoing uniform circular motion
about the Earth using:
define the term orbital velocity and
the quantitative and qualitative mv2
F=
relationship between orbital velocity, r
the gravitational constant, mass of the
central body, mass of the satellite and solve problems and analyse
the radius of the orbit using Kepler’s information using:
Law of Periods r3 GM
=
account for the orbital decay of
T 2 4π 2
satellites in low Earth orbit
42
discuss issues associated with safe re-

entry into the Earth’s atmosphere and
landing on the Earth’s surface
identify that there is an optimum angle

for safe re-entry for a manned
spacecraft into the Earth’s atmosphere
and the consequences of failing to
achieve this angle
3. The Solar System describe a gravitational field in the present information and use available
is held together by region surrounding a massive object evidence to discuss the factors
gravity in terms of its effects on other masses affecting the strength of the
in it gravitational force
define Newton’s Law of Universal solve problems and analyse

Gravitation: information using:
m1m2
F =G m1m2
d2 F =G
d2
discuss the importance of Newton’s
Law of Universal Gravitation in
understanding and calculating the
motion of satellites
identify that a slingshot effect can be

provided by planets for space probes
43
4. Current and outline the features of the aether gather and process information to
emerging model for the transmission of light interpret the results of the Michelson-
understanding Morley experiment
about time and describe and evaluate the Michelson-
space has been Morley attempt to measure the relative perform an investigation to help
dependent upon velocity of the Earth through the distinguish between non-inertial and
earlier models of aether inertial frames of reference
the transmission of
light discuss the role of the Michelson- analyse and interpret some of
Morley experiments in making Einstein’s thought experiments
determinations about competing involving mirrors and trains and
theories discuss the relationship between
thought and reality
outline the nature of inertial frames of
reference analyse information to discuss the
relationship between theory and the
discuss the principle of relativity evidence supporting it, using
Einstein’s predictions based on
describe the significance of Einstein’s relativity that were made many years
assumption of the constancy of the before evidence was available to
speed of light support it
identify that if c is constant then space solve problems and analyse

and time become relative information using:
discuss the concept that length

standards are defined in terms of time E = mc 2
in contrast to the original metre
standard v2
lv = l0 1−
explain qualitatively and c2
quantitatively the consequence of
special relativity in relation to: t0
tv =
– the relativity of simultaneity
v2
– the equivalence between mass and 1−
energy c2
– length contraction
– time dilation m0
mv =
– mass dilation v2
1−
discuss the implications of mass c2
increase, time dilation and length
contraction for space travel
44
9.3 Motors and Generators

Contextual Outline
Modern industrialised society is geared to using electricity. Electricity has characteristics that have made it
uniquely appropriate for powering a highly technological society. There are many energy sources that can be
readily converted into electricity. In Australia, most power plants burn a fuel, such as coal, or use the energy
of falling water to generate electricity on a large scale. Electricity is also relatively easy to distribute.
Electricity authorities use high-voltage transmission lines and transformers to distribute electricity to homes
5
and industries around each state. Voltages can be as high as 5 x 10 volts from power stations but by the time
this reaches homes, the electricity has been transformed to 240 volts. While it is relatively economical to
generate electric power at a steady rate, there are both financial and environmental issues that should be
considered when assessing the long-term impact of supplying commercial and household power.
The design of a motor for an electrical appliance requires consideration of whether it will run at a set speed,
how much power it must supply, whether it will be powered by AC or DC and what reliability is required. The
essentials of an electric motor are the supply of electrical energy to a coil in a magnetic field causing it to
rotate.
The generation of electrical power requires relative motion between a magnetic field and a conductor. In a
generator, mechanical energy is converted into electrical energy while the opposite occurs in an electric
motor.
The electricity produced by most generators is in the form of alternating current. In general AC generators,
motors and other electrical equipment are simpler, cheaper and more reliable than their DC counterparts. AC
electricity can be easily transformed into higher or lower voltages making it more versatile than DC
electricity.
This module increases students’ understanding of the applications and uses of physics and the implications of
45
1. Motors use the discuss the effect on the magnitude of solve problems using:
effect of forces on the force on a current-carrying F II
current-carrying conductor of variations in: =k 1 2
l d
conductors in – the strength of the magnetic field
magnetic fields in which it is located perform a first-hand investigation to
– the magnitude of the current in the demonstrate the motor effect
conductor
– the length of the conductor in the solve problems and analyse
external magnetic field information about the force on
– the angle between the direction of current-carrying conductors in
the external magnetic field and the magnetic fields using:
direction of the length of the
conductor F = BIlsinθ
describe qualitatively and solve problems and analyse

quantitatively the force between long information about simple motors
parallel current-carrying conductors: using:
F II τ = nBIAcosθ
=k 1 2
l d identify data sources, gather and
process information to qualitatively
define torque as the turning moment
describe the application of the motor
of a force using:
effect in:
τ = Fd – the galvanometer
– the loudspeaker
identify that the motor effect is due to
the force acting on a current-carrying
conductor in a magnetic field
describe the forces experienced by a

current-carrying loop in a magnetic
field and describe the net result of the
forces
describe the main features of a DC

electric motor and the role of each
feature
identify that the required magnetic

fields in DC motors can be produced
either by current-carrying coils or
permanent magnets
46
2. The relative outline Michael Faraday’s discovery perform an investigation to model the
motion between a of the generation of an electric current generation of an electric current by
conductor and by a moving magnet moving a magnet in a coil or a coil
magnetic field is near a magnet
used to generate an define magnetic field strength B as
electrical voltage magnetic flux density plan, choose equipment or resources
for, and perform a first-hand
describe the concept of magnetic flux investigation to predict and verify the
in terms of magnetic flux density and effect on a generated electric current
surface area when:
- the distance between the coil and
describe generated potential difference magnet is varied
as the rate of change of magnetic flux - the strength of the magnet is
through a circuit varied
- the relative motion between the
account for Lenz’s Law in terms of coil and the magnet is varied
conservation of energy and relate it to
the production of back emf in motors gather, analyse and present
information to explain how induction
explain that, in electric motors, back is used in cooktops in electric ranges
emf opposes the supply emf
gather secondary information to
explain the production of eddy identify how eddy currents have been
currents in terms of Lenz’s Law utilised in electromagnetic braking
3. Generators are describe the main components of a plan, choose equipment or resources
used to provide generator for, and perform a first-hand
large scale power investigation to demonstrate the
production compare the structure and function of production of an alternating current
a generator to an electric motor
describe the differences between AC discuss advantages/disadvantages of
and DC generators AC and DC generators and relate
these to their use
discuss the energy losses that occur as
energy is fed through transmission analyse secondary information on the
lines from the generator to the competition between Westinghouse
consumer and Edison to supply electricity to
cities
assess the effects of the development
of AC generators on society and the gather and analyse information to
environment identify how transmission lines are:
– insulated from supporting
structures
– protected from lightning strikes
47
4. Transformers describe the purpose of transformers perform an investigation

allow generated in electrical circuits to model the structure of a transformer
voltage to be either to demonstrate how secondary voltage
increased or compare step-up and step-down is produced
decreased before it transformers
is used solve problems and analyse
identify the relationship between the information about transformers using:
ratio of the number of turns in the Vp n p
primary and secondary coils and the =
ratio of primary to secondary voltage Vs n s
explain why voltage transformations gather, analyse and use available

are related to conservation of energy evidence to discuss how difficulties of
heating caused by eddy currents in
explain the role of transformers in transformers may be overcome
electricity sub-stations
gather and analyse secondary
discuss why some electrical information to discuss the need for
appliances in the home that are transformers in the transfer of
connected to the mains domestic electrical energy from a power station
power supply use a transformer to its point of use
discuss the impact of the development

of transformers on society
5. Motors are used in describe the main features perform an investigation to

industries and the of an AC electric motor demonstrate the principle of an AC
home usually to induction motor
convert electrical
energy into more
useful forms of gather, process and analyse
energy information to identify some of the
energy transfers and transformations
involving the conversion of electrical
energy into more useful forms in the
home and industry
48
9.4 From Ideas to Implementation

Contextual outline
By the beginning of the twentieth century, many of the pieces of the physics puzzle seemed to be falling into
place. The wave model of light had successfully explained interference and diffraction, and wavelengths at the
extremes of the visible spectrum had been estimated. The invention of a pump that would evacuate tubes to
10–4 atmospheres allowed the investigation of cathode rays. X-rays would soon be confirmed as
electromagnetic radiation and patterns in the Periodic Table appeared to be nearly complete. The nature of
cathode rays was resolved with the measurement of the charge on the electron soon to follow. There was a
small number of experimental observations still unexplained but this, apparently complete, understanding of
the world of the atom was about to be challenged.
The exploration of the atom was well and truly inward bound by this time and, as access to greater amounts of
energy became available, the journey of physics moved further and further into the study of subatomic
particles. Careful observation, analysis, imagination and creativity throughout the early part of the twentieth
century developed a more complete picture of the nature of electromagnetic radiation and matter. The journey
taken into the world of the atom has not remained isolated in laboratories. The phenomena discovered by
physicists have, with increasing speed, been channelled into technologies, such as computers, to which society
has ever-increasing access. These technologies have, in turn, often assisted physicists in their search for
further knowledge and understanding of natural phenomena at the sub-atomic level.
applications and uses of physics, the implications of physics for society and the environment, and the current
issues, research and developments in physics.
49
1. Increased explain why the apparent perform an investigation and gather first-
understandings of inconsistent behaviour of cathode hand information to observe the
cathode rays led to rays caused debate as to whether occurrence of different striation patterns
the development of they were charged particles or for different pressures in discharge tubes
television electromagnetic waves
perform an investigation to demonstrate
explain that cathode ray tubes and identify properties of cathode rays
allowed the manipulation of a stream using discharge tubes:
– containing a maltese cross
of charged particles
– containing electric plates
– with a fluorescent display
identify that moving charged
screen
particles in a magnetic field – containing a glass wheel
experience a force – analyse the information gathered
to determine the sign of the charge
identify that charged plates produce on cathode rays
an electric field
solve problem and analyse information
describe quantitatively the force using:
acting on a charge moving through a F = qvB sin θ
magnetic field
F = qE
F = qvB sin θ
and
discuss qualitatively the electric
field strength due to a point charge, V
positive and negative charges and E=
oppositely charged parallel plates d
describe quantitatively the electric

field due to oppositely charged
parallel plates
outline Thomson’s experiment to

measure the charge/mass ratio of
an electron
outline the role of:

– electrodes in the electron gun
– the deflection plates or coils
– the fluorescent screen
in the cathode ray tube of
conventional TV displays and
oscilloscopes
50
2. The reconceptu- describe Hertz’s observation of the perform an investigation to demonstrate

alisation of the effect of a radio wave on a receiver the production and reception of radio
model of light led and the photoelectric effect he waves
to an produced but failed to investigate
understanding of identify data sources, gather, process and
the photoelectric outline qualitatively Hertz’s analyse information and use available
effect and black experiments in measuring the speed evidence to assess Einstein’s
body radiation of radio waves and how they relate contribution to quantum theory and its
to light waves relation to black body radiation
identify Planck’s hypothesis that identify data sources gather, process and
radiation emitted and absorbed by present information to summarise the use
the walls of a black body cavity is of the photoelectric effect in:
quantised – solar cells
– photocells
identify Einstein’s contribution to
quantum theory and its relation to solve problems and analyse information
black body radiation using:
explain the particle model of light in E = hf
terms of photons with particular
energy and frequency and
c = fλ
identify the relationships between
photon energy, frequency, speed of
process information to discuss Einstein
light and wavelength:
and Planck’s differing views about
E = hf whether science research is removed
from social and political forces
and
c = fλ
51
3. Limitations of past identify that some electrons in solids perform an investigation to model the
technologies and are shared between atoms and move behaviour of semiconductors,
increased research freely including the creation of a hole or
into the structure positive charge on the atom that has
of the atom describe the difference between lost the electron and the movement of
resulted in the conductors, insulators and electrons and holes in opposite
invention of semiconductors in terms of band directions when an electric field is
transistors structures and relative electrical applied across the semiconductor
resistance
gather, process and present secondary
identify absences of electrons in a information to discuss how
nearly full band as holes, and shortcomings in available
recognise that both electrons and communication technology lead to an
holes help to carry current increased knowledge of the properties
of materials with particular reference
compare qualitatively the relative to the invention of the transistor
number of free electrons that can drift
from atom to atom in conductors, identify data sources, gather, process,
semiconductors and insulators analyse information and use available
evidence to assess the impact of the
identify that the use of germanium in invention of transistors on society
early transistors is related to lack of with particular reference to their use
ability to produce other materials of in microchips and microprocessors
suitable purity
describe how ‘doping’ a

semiconductor can change its
electrical properties
identify differences in p and n-type

semiconductors in terms of the
relative number of negative charge
carriers and positive holes
describe differences between solid

state and thermionic devices and
discuss why solid state devices
replaced thermionic devices
52
4. Investigations into outline the methods used by the process information to identify some
the electrical Braggs to determine crystal structure of the metals, metal alloys and
properties of compounds that have been identified
particular metals identify that metals possess a crystal as exhibiting the property of
at different lattice structure superconductivity and their critical
temperatures led temperatures
to the describe conduction in metals as a free
identification of movement of electrons unimpeded by perform an investigation to
superconductivity the lattice demonstrate magnetic levitation
and the
exploration of identify that resistance in metals is analyse information to explain why a
possible increased by the presence of magnet is able to hover above a
applications impurities and scattering of electrons superconducting material that has
by lattice vibrations reached the temperature at which it is
superconducting
describe the occurrence in
superconductors below their critical gather and process information to
temperature of a population of describe how superconductors and the
electron pairs unaffected by electrical
effects of magnetic fields have been
resistance
applied to develop a maglev train
discuss the BCS theory
process information to discuss
discuss the advantages of using possible applications of
superconductors and identify superconductivity and the effects of
limitations to their use those applications on computers,
generators and motors and
transmission of electricity through
power grids
53
9.5 Option — Geophysics

Contextual Outline
Geophysics is the application of physical theories and measurement to the investigation of the planet we
inhabit. Geophysical studies may involve large-scale problems such as the Earth’s structure and behaviour
(solid earth geophysics) and problems associated with the exploration of the crust for minerals and for
engineering purposes (exploration geophysics).
Both solid earth geophysics and exploration geophysics use similar instrumentation and methods to study
phenomena such as gravitation, the Earth’s magnetic field, radioactivity and the behaviour of seismic waves.
Using an understanding of its material properties, geophysicists explore the Earth in ways that human senses
cannot.
Geophysical investigations provide society with such benefits as improved location of energy resources,
minerals, hazard minimisation and an understanding of the complex planet we inhabit.
This module increases students’ understanding of the history of physics and the implications of physics for
society and the environment.
1. Geophysics describe the properties of earth identify data sources, gather and
involves the materials that are studied in process information to discuss
measurement geophysics — particularly elasticity, Newton’s proposal for the shape of
of physical density, thermal, magnetic and the Earth using data gathered from
properties of electrical properties investigations involving pendulum
the Earth measurements
identify the principal methods used in
geophysics as seismic, gravitational, plan, choose equipment or resources
magnetic, palaeomagnetic, electrical, for, and perform first-hand
electromagnetic, radiometric and investigations to gather data and use
geothermal, and describe the type of the available evidence to analyse the
information that two of these methods variation in density of different rock
can provide types
54
2. Some physical describe how absorption and perform a first-hand investigation to

phenomena such as reflection of radiation can provide gather data to demonstrate the
gravitation and information about a reflecting surface relationship between the nature of a
radiation provide surface and the radiation reflected
information about explain how remote sensing from it
the Earth at a techniques can be used to monitor
distance from it climate, vegetation and pollution process information to describe the
significance of Jean Richer’s
identify two uses of remote sensing of experiments with the pendulum in
radiation in mineral exploration disproving the spherical Earth
hypothesis
outline reasons why the gravitational
field of the Earth varies at different solve problems and analyse
points on its surface information to calculate the mass of
the Earth given g
describe how the paths of satellites are and the diameter of the Earth
used to study the Earth’s gravity
outline the structure and function of a information to calculate the mass of
gravimeter the Earth, given the period and the
altitude of a satellite:
describe the purpose of data reduction
in gravity surveys
r3 GM
=
T 2 4π 2
recount the steps involved in gravity
data reduction including latitude process information from secondary
correction, free air correction and sources to reduce collected gravity
Bouguer correction data
identify and describe the uses of

gravity methods in resource
exploration
55
3. Seismic methods describe the properties of P waves and perform an investigation to model the
provide S waves principles of the reflection and
information about refraction of seismic waves
the large scale outline how a seismic wave’s path is
structure of the affected by the properties of the analyse information from a graph of
Earth and the material it travels through travel time versus shot-to-geophone
detailed structure distance for a single layer
of its crust explain how seismic waves are
reflected and refracted at an interface gather, process and present
diagrammatic information to show the
outline the structure and function of paths of P and S waves through the
geophones and seismometers Earth
summarise the evidence for a liquid

outer core and a solid inner core of the
Earth
outline the methods of seismic

reflection and refraction
discuss the uses of seismic methods in

the search for oil and gas
4. Studies of past and describe the Earth’s current magnetic perform an investigation that models,
present physical field and present information to
phenomena demonstrate how the inclination of the
indicate that the account for the evidence that the Earth’s magnetic field varies with
Earth is dynamic Earth’s magnetic field varies over latitude
time
summarise the geophysical evidence information to calculate the spreading
that supports the theory of plate rate of an ocean using a magnetic
tectonics polarity time scale and a magnetic
anomaly profile
discuss the initial reluctance of some
of the scientific community to accept
the mobility of the Earth’s plates in
the absence of a mechanism for plate
movement
56
5. Geophysics explain the benefits of geophysical identify data sources, plan, choose
provides methods in mineral exploration and equipment or resources for, and
information environmental monitoring perform an investigation to
that is of economic demonstrate the use of a geophysical
and social benefit describe the role that geophysicists method in the field
have played in the following:
– monitoring nuclear test ban treaties
– natural hazard reduction
57
9.6 Option — Medical Physics

Contextual Outline
The use of other advances in technology, developed from our understanding of the electromagnetic spectrum,
and based on sound physical principles, has allowed medical technologists more sophisticated tools to analyse
and interpret bodily process for diagnostic purposes. Diagnostic imaging expands the knowledge of
practitioners and the practice of medicine. It usually uses non-invasive methods for identifying and
monitoring diseases or injuries via the generation of images representing internal anatomical structures and
organs of the body.
Technologies, such as ultrasound, compute axial tomography, positron emission tomography and magnetic
resonance imaging, can often provide clear diagnostic pictures without surgery. A magnetic resonance image
(MRI) scan of the spine, for example, provides a view of the discs in the back, as well as the nerves and other
soft tissues. The practitioner can look at the MRI films and determine whether there is a pinched nerve, a
degenerative disc or a tumour. The greatest advantage of these techniques are their ability to allow the
practitioner to see inside the body without the need for surgery.
This module increases students’ understanding of the history of physics and the implications of physics for
society and the environment.
58
1. The properties of identify the differences between solve problems and analyse
ultrasound waves ultrasound and sound in normal information to calculate the acoustic
can be used as hearing range impedance of a range of materials,
diagnostic tools including bone, muscle, soft tissue,
describe the piezoelectric effect and fat, blood and air and explain the
the effect of using an alternating types of tissues that ultrasound can be
potential difference with a used to examine
piezoelectric crystal
define acoustic impedance: observe at least two ultrasound
Z = ρυ images of body organs
and identify that different materials
have different acoustic impedances identify data sources and gather
information to observe the flow of
blood through the heart from a
describe how the principles of Doppler ultrasound video image
acoustic impedance and reflection and
refraction are applied to ultrasound identify data sources, gather, process
and analyse information to describe
define the ratio of reflected to initial
how ultrasound is used to measure
intensity as:
bone density
I r [Z 2 − Z1 ]
2
=
I o [Z 2 + Z1 ] 2 solve problems and analyse
information using:
identify that the greater the difference Z = ρυ
in acoustic impedance between two
materials, the greater is the reflected and
proportion of the incident pulse
I r [Z 2 − Z1 ]
2
=
describe the situations in which A I o [Z 2 + Z1 ] 2
scans, B scans, and phase and sector
scans would be used and the reasons
for the use of each
describe the Doppler effect in sound

waves and how it is used in
ultrasonics to obtain flow
characteristics of blood moving
through the heart
outline some cardiac problems that

can be detected through the use of the
Doppler effect
59
2. The physical describe how X-rays are currently gather information to observe at least
properties of produced one image of a fracture on an X-ray
electromagnetic film and X-ray images of other body
radiation can be compare the differences between parts
used as diagnostic ‘soft’ and ‘hard’ X-rays
tools gather secondary information to
explain how a computed axial observe a CAT scan image and
tomography (CAT) scan is produced compare the information provided by
CAT scans to that provided by an
describe circumstances where a CAT X-ray image for the same body part
scan would be a superior diagnostic
tool compared to either X-rays or perform a first-hand investigation to
ultrasound demonstrate the transfer of light by
optical fibres
explain how an endoscope works in
relation to total internal reflection gather secondary information to
observe internal organs from images
discuss differences between the role of
coherent and incoherent bundles of produced by an endoscope
fibres in an endoscope
explain how an endoscope is used in:

– observing internal organs
– obtaining tissue samples of
internal organs for further testing
3. Radioactivity can outline properties of radioactive perform an investigation to compare

be used as a isotopes and their half lives that are an image of bone scan with an X-ray
diagnostic tool used to obtain scans of organs image
describe how radioactive isotopes may gather and process secondary

be metabolised by the body to bind or information to compare a scanned
accumulate in the target organ image of at least one healthy body
part or organ with a scanned image of
identify that during decay of specific its diseased counterpart
radioactive nuclei positrons are given
off
discuss the interaction of electrons

and positrons resulting in the
production of gamma rays
describe how the positron emission

tomography (PET) technique is used
for diagnosis
60
4. The magnetic field identify that the nuclei of certain perform an investigation to observe
produced by atoms and molecules behave as small images from magnetic resonance
nuclear particles magnets image (MRI) scans, including a
can be used as a comparison of healthy and damaged
diagnostic tool identify that protons and neutrons in tissue
the nucleus have properties of spin
and describe how net spin is obtained identify data sources, gather, process
and present information using
explain that the behaviour of nuclei available evidence to explain why
with a net spin, particularly hydrogen, MRI scans can be used to:
is related to the magnetic field they – detect cancerous tissues
produce – identify areas of high blood flow
– distinguish between grey and
describe the changes that occur in the white matter in the brain
orientation of the magnetic axis of
nuclei before and after the application gather and process secondary
of a strong magnetic field information to identify the function of
the electromagnet, radio frequency
define precessing and relate the oscillator, radio receiver and
frequency of the precessing to the computer in the MRI equipment
composition of the nuclei and the
strength of the applied external identify data sources, gather and
magnetic field process information to compare the
advantages and disadvantages of
discuss the effect of subjecting X-rays, CAT scans, PET scans and
precessing nuclei to pulses of radio MRI scans
waves
gather, analyse information and use
explain that the amplitude of the available evidence to assess the
signal given out when precessing impact of medical applications of
nuclei relax is related to the number of physics on society
nuclei present
explain that large differences would

occur in the relaxation time between
tissue containing hydrogen bound
water molecules and tissues
containing other molecules
61
9.7 Option — Astrophysics

Contextual Outline
The wonders of the Universe are revealed through technological advances based on tested principles of
physics. Our understanding of the cosmos draws upon models, theories and laws in our endeavour to seek
explanations for the myriad of observations made by various instruments at many different wavelengths.
Techniques, such as imaging, photometry, astrometry and spectroscopy, allow us to determine many of the
properties and characteristics of celestial objects. Continual technical advancement has resulted in a range of
devices extending from optical and radio-telescopes on Earth to orbiting telescopes, such as Hipparcos,
Chandra and HST.
Explanations for events in our spectacular Universe, based on our understandings of the electromagnetic
spectrum, allow for insights into the relationships between star formation and evolution (supernovae), and
extreme events, such as high gravity environments of a neutron star or black hole.
This module increases students’ understanding of the nature and practice of physics and the implications of
1. Our understanding discuss Galileo’s use of the telescope identify data sources, plan, choose
of celestial objects to identify features of the Moon equipment or resources for, and
depends upon perform an investigation to
observations made discuss why some wavebands can be demonstrate why it is desirable for
from Earth or more easily detected from space telescopes to have a large diameter
from space near objective lens or mirror in terms of
the Earth define the terms ‘resolution’ and both sensitivity and resolution
‘sensitivity’ of telescopes
discuss the problems associated with

ground-based astronomy in terms of
resolution and absorption of radiation
and atmospheric distortion
outline methods by which the

resolution and/or sensitivity of
ground-based systems can be
improved, including:
– adaptive optics
– interferometry
– active optics
62
2. Careful define the terms parallax, parsec, solve problems and analyse
measurement of a light-year information to calculate the distance
celestial object’s to a star given its trigonometric
position in the sky explain how trigonometric parallax parallax using:
(astrometry) may can be used to determine the distance 1
be used to to stars d=
determine its p
distance discuss the limitations of
trigonometric parallax measurements gather and process information to
determine the relative limits to
trigonometric parallax distance
determinations using recent ground-
based and space-based telescopes
3. Spectroscopy is a account for the production of emission perform a first-hand investigation to

vital tool for and absorption spectra and compare examine a variety of spectra produced
astronomers and these with a continuous blackbody by discharge tubes, reflected sunlight,
provides spectrum or incandescent filaments
a wealth of
information describe the technology needed to analyse information to predict the
measure astronomical spectra surface temperature of a star from its
intensity/wavelength graph
identify the general types of spectra
produced by stars, emission nebulae,
galaxies and quasars
describe the key features of stellar

spectra and describe how these are
used to classify stars
describe how spectra can provide

information on surface temperature,
rotational and translational velocity,
density and chemical composition of
stars
63
4. Photometric define absolute and apparent solve problems and analyse

measurements can magnitude information using:
be used for d
determining explain how the concept of magnitude M = m − 5 log( )
10
distance and can be used to determine the distance
comparing objects to a celestial object and
IA
outline spectroscopic parallax = 100 ( mB − m A ) / 5
IB
explain how two-colour values (ie to calculate the absolute or apparent
colour index, B-V) are obtained and magnitude of stars using data and a
why they are useful reference star
describe the advantages of perform an investigation to
photoelectric technologies over demonstrate the use of filters for
photographic methods for photometry photometric measurements
identify data sources, gather, process

and present information to assess the
impact of improvements in
measurement technologies on our
understanding of celestial objects
5. The study of describe binary stars in terms of the perform an investigation to model the
binary and means of their detection: visual, light curves of eclipsing binaries using
variable stars eclipsing, spectroscopic and computer simulation
reveals vital astrometric
information about solve problems and analyse
stars explain the importance of binary stars information by applying:
in determining stellar masses
4π 2 r3
m1 + m2 =
classify variable stars as either GT 2
intrinsic or extrinsic and periodic or
non-periodic
explain the importance of the period-

luminosity relationship for
determining the distance of cepheids
64
6. Stars evolve and describe the processes involved in present information by plotting
eventually ‘die’ stellar formation Hertzsprung-Russell diagrams for:
nearby or brightest stars, stars in a
outline the key stages in a star’s life in young open cluster, stars in a globular
terms of the physical processes cluster
involved
analyse information from a H-R
describe the types of nuclear reactions diagram and use available evidence to
involved in Main-Sequence and post- determine the characteristics of a star
Main Sequence stars and its evolutionary stage
discuss the synthesis of elements in present information by plotting on a

stars by fusion H-R diagram the pathways of stars of
1, 5 and 10 solar masses during their
explain how the age of a globular life cycle
cluster can be determined from its
zero-age main sequence plot for a H-R
diagram
explain the concept of star death in
relation to:
– planetary nebula
– supernovae
– white dwarfs
– neutron stars/pulsars
– black holes
65
9.8 Option — From Quanta to Quarks

Contextual Outline
In the early part of the twentieth century, many experimental and theoretical problems remained unresolved.
Attempts to explain the behaviour of matter on the atomic level with the laws of classical physics were not
successful. Phenomena such as black-body radiation, the photoelectric effect and the emission of sharp
spectral lines by atoms in a gas discharge tube could not be understood within the framework of classical
physics.
Between 1900 and 1930, a revolution took place and a new more generalised formulation called quantum
mechanics was developed. This new approach was highly successful in explaining the behaviour of atoms,
molecules and nuclei. As with relativity, quantum theory requires a modification of ideas about the physical
world.
This module increases students’ understanding of the history, nature and practice of physics and the current
issues, research and developments in physics.
1. Problems with the discuss the structure of the Rutherford perform a first-hand investigation to
Rutherford model model of the atom, the existence of observe the visible components of the
of the atom led to the nucleus and electron orbits hydrogen spectrum
the search for a
model that would analyse the significance of the process and present diagrammatic
better explain the hydrogen spectrum in the information to illustrate Bohr’s
observed development of Bohr’s model of the explanation of the Balmer series
phenomena atom
define Bohr’s postulates information using:
1  1 1 
discuss Planck’s contribution to the = R 2 − 2 
concept of quantised energy λ  nf ni 
describe how Bohr’s postulates led to analyse secondary information to

the development of a mathematical identify the difficulties with the
model to account for the existence of Rutherford-Bohr model, including its
the hydrogen spectrum: inability to completely explain:
1  1 1  – the spectra of larger atoms
= R 2 − 2  – the relative intensity of spectral
λ  nf ni 
lines
– the existence of hyperfine spectral
discuss the limitations of the Bohr lines
model of the hydrogen atom – the Zeeman effect
66
2. The limitations of describe the impact of de Broglie’s solve problems and analyse
classical physics proposal that any kind of particle has information using:
gave birth to both wave and particle properties h
quantum physics λ=
define diffraction and identify that mv
interference occurs between waves
that have been diffracted gather, process, analyse and present
information and use available
describe the confirmation of de evidence to assess the contributions
Broglie’s proposal by Davisson and made by Heisenberg and Pauli to the
Germer development of atomic theory
explain the stability of the electron

orbits in the Bohr atom using de
Broglie’s hypothesis
67
3. The work of define the components of the nucleus perform a first-hand investigation or
Chadwick and (protons and neutrons) as nucleons gather secondary information to
Fermi in and contrast their properties observe radiation emitted from a
producing nucleus using Wilson Cloud Chamber
artificial discuss the importance of or similar detection device
transmutations led conservation laws to Chadwick’s
to practical discovery of the neutron solve problems and analyse
applications of information to calculate the mass
nuclear physics define the term ‘transmutation’ defect and energy released in natural
transmutation and fission reactions
describe nuclear transmutations due to
natural radioactivity
describe Fermi’s initial experimental

observation of nuclear fission
discuss Pauli’s suggestion of the

existence of neutrino and relate it to
the need to account for the energy
distribution of electrons emitted in
β-decay
evaluate the relative contributions of

electrostatic and gravitational forces
between nucleons
account for the need for the strong

nuclear force and describe its
properties
explain the concept of a mass defect

using Einstein’s equivalence between
mass and energy
describe Fermi’s demonstration of a

controlled nuclear chain reaction in
1942
compare requirements for controlled

and uncontrolled nuclear chain
reactions
68
4. An understanding explain the basic principles of a gather, process and analyse

of the nucleus has fission reactor information to assess the significance
led to large science of the Manhattan Project to society
projects and many describe some medical and industrial
applications applications of radio-isotopes identify data sources, and gather,
process, and analyse information to
describe how neutron scattering is describe the use of:
used as a probe by referring to the - a named isotope in medicine
properties of neutrons - a named isotope in agriculture
- a named isotope in engineering
identify ways by which physicists
continue to develop their
understanding of matter, using
accelerators as a probe to investigate
the structure of matter
discuss the key features and

components of the standard model of
matter, including quarks and leptons
69
9.9 Option — The Age of Silicon

Contextual Outline
The invention of the transistor by Bardeen, Brattain and Shockley paved the way for a wide range of new
electronic devices. A knowledge of the electrical, magnetic, optical and thermal properties of compounds of
transition and rare earth metals enables their application to robotics, automation in the manufacturing industry
and advances in the personal computer industry.
Semiconducting material is the basis of the integrated circuits that run our computers and many modern
technologies, including programmable controllers. Many modern technologies use electro-mechanical
principles to interface real world sensors and outputs to microprocessors, temperature controllers,
thermocouples and power regulators.
This module increases students’ understanding of the applications and uses of physics, the implications of
physics for society and the environment, and current issues, research and developments in physics.
1. Electronics has identify that early computers each identify data sources, gather, process
undergone rapid employed hundreds of thousands of and analyse information to outline the
development due single transistors rapid development of electronics and,
to greater using examples, relate this to the
knowledge of the explain that the invention of the impact of electronics on society
properties of integrated circuit using a silicon chip
materials and was related to the need to develop gather secondary information to
increasingly lightweight computers and compact identify the desirable optical
complex guidance systems properties of silica, including:
manufacturing – refractive index
techniques explain the impact of the development – ability to form fibres
of the silicon chip on the development – optical non-linearity
of electronics
outline the similarities and differences

between an integrated circuit and a
transistor
70
2. Electronics use describe the difference between an identify and analyse data and perform
analogue and electronic circuit and an electric an investigation to demonstrate the
digital systems, the circuit and the advantages and difference between digital and
basic circuit disadvantages of each analogue voltage outputs over time
elements of which
are potential distinguish between digital and gather, process and present
dividers and analogue systems in terms of their information to identify electronic
transistors ability to respond to or process systems that use analogue systems,
continuous or discrete information including television and radio sets and
those that use digital systems,
identify systems that are digital and including CD players
systems that are analogue in a range of
devices solve problems and analyse
information involving resistances,
identify potential dividers and voltages and currents in potential
transducers as common elements in dividers
both analogue and digital systems
explain how the ratio of resistances in

a potential divider allows a range of
voltages to be obtained
describe the role of transducers as an

interface between the environment
and an electronic system
3. Sensors and other define a transducer as a device that gather, process and present
devices allow the can be affected by or affect the graphically information on the
input of environment relationship between resistance and
information in the amount of light falling on a light-
electronic systems explain the relationship in a light- dependent resistor
dependent resistor (LDR) between
resistance and the amount of light solve problems and analyse
falling on it information involving circuit
diagrams of LDRs and thermistors
describe the role of LDRs in cameras
gather and analyse information and
explain why thermistors are use available evidence to explain why
transducers and describe the solar cells, switches and the light
relationship between temperature and meter in a camera may be considered
resistance in different types of input transducers
thermistors
distinguish between positive and

negative temperature coefficient
thermistors
explain the function of thermistors in

fire alarms and thermostats that
control temperature
71
4. Some devices use explain the need for a relay when a process information to explain the
output transducers large current is used in a device way in which a relay works using a
to make circuit diagram
connections describe the role of the electromagnet,
between the device pivot, switch contacts and insulator in solve problems and analyse
and the a relay information using circuit diagrams
environment involving LEDs and relays
describe the structure of light-emitting
diodes (LEDs) in terms of p-type and analyse information to assess
n-type semiconductors situations where an LED would be
preferable to an ordinary light source
explain why voltmeters, ammeters,

CROs and other electronic meters are
considered output transducers
5. Information can be describe the behaviour of AND, OR identify data sources, plan, choose
processed using and inverter logic gates in terms of equipment or resources for, and
electronic circuits high and low voltages and relate these perform first-hand investigations to
to input and outputs construct truth tables for logic gates
identify that gates can be used in solve problems and analyse

combination with each other to make information using circuit diagrams
half or full adders involving logic gates
72
6. Amplifiers are describe the functions and the solve problems and analyse
used in different properties of an ideal amplifier information to show the transfer
ways in current characteristics of an amplifier
technologies explain that the gain of an ideal
amplifier is the ratio of its output gather and present graphical
voltage to its input voltage: information to show the transfer
Vout characteristics of an inverting
A0 = amplifier
Vin
identify that an operational amplifier information about setting the gain of
is a component of a typical amplifier an inverting amplifier by calculating
the values of external resistors using:
describe the characteristics of an
operational amplifier Vout Rf
=−
Vin Ri
distinguish between open-loop gain
and closed-loop gain perform a first-hand investigation of a
summing amplifier by adding voltages
identify the voltage range over which from two separate sources
an operational amplifier circuit acts as
a linear device gather information to identify the
different ways in which amplifiers are
describe how an operational amplifier used in current technologies
can be used as an inverting amplifier
explain that the gain of an inverting

amplifier is given by:
Vout Rf
=−
Vin Ri
explain the difference between the

non-inverting input and the inverting
input
discuss how feedback can be used in a

control system
explain the use of two input resistors

to produce a summing amplifier
73
7. There are physics identify that the increased speed of gather, process and analyse
limits that may computers has been accompanied by a information and use available
impact on the decrease in size of circuit elements evidence to discuss the possibility that
future uses of there may be a limit on the growth of
computers explain that as circuit component size computer power and this may require
is decreasing, quantum effects become a reconceptualisation of the way
increasingly important computers are designed
74
10 Course Requirements
For the Preliminary course:
• 120 indicative hours are required to complete the course
• the content in each module must be addressed over the course
• experience over the course must cover the scope of each skill as described in Section 8.1
• practical experiences should occupy a minimum of 45 indicative hours of course time
• at least one open-ended investigation integrating the skills and knowledge and understanding outcomes is
required.
For the HSC course:

• the Preliminary course is a prerequisite
• 120 indicative hours are required to complete the course
• the content in each module of the core and one elective must be addressed over the course
• experiences over the course must cover the scope of each skill as described in Section 9.1
• practical experiences should occupy a minimum of 35 indicative hours of course time
• at least one open-ended investigation integrating the skills and knowledge and understanding outcomes is
required.
75
11 Post-school Opportunities
The study of Physics Stage 6 provides students with knowledge, understanding and skills that form a valuable
foundation for a range of courses at university and other tertiary institutions.
In addition, the study of Physics Stage 6 assists students to prepare for employment and full and active
participation as citizens. In particular, there are opportunities for students to gain recognition in vocational
education and training. Teachers and students should be aware of these opportunities.
Recognition of Student Achievement

in Vocational Education and Training (VET)
Wherever appropriate, the skills and knowledge acquired by students in their study of HSC courses should be
recognised by industry and training organisations. Recognition of student achievement means that students
who have satisfactorily completed HSC courses will not be required to repeat their learning in courses in
TAFE NSW or other Registered Training Organisations (RTOs).
Registered Training Organisations, such as TAFE NSW, provide industry training and issue qualifications
within the Australian Qualifications Framework (AQF).
The degree of recognition available to students in each subject is based on the similarity of outcomes between
HSC courses and industry training packages endorsed within the AQF. Training packages are documents that
link an industry’s competency standards to AQF qualifications. More information about industry training
packages can be found on the National Training Information Service (NTIS) website (http://www.ntis.gov.au).
Recognition by TAFE NSW

TAFE NSW conducts courses in a wide range of industry areas, as outlined each year in the TAFE NSW
Handbook. Under current arrangements, the recognition available to students of Physics in relevant courses
conducted by TAFE is described in the HSC/TAFE Credit Transfer Guide. This guide is produced by the
Board of Studies and TAFE NSW and is distributed annually to all schools and colleges. Teachers should
refer to this guide and be aware of the recognition available to their students through the study of Physics
Stage 6. This information can be found on the HSC / TAFE Credit Transfer website
(www.det.nsw.edu.au/hsctafe)
Recognition by other Registered Training Organisations

Students may also negotiate recognition into a training package qualification with another RTO. Each student
will need to provide the RTO with evidence of satisfactory achievement in Physics Stage 6 so that the degree
of recognition available can be determined.
76
12 Assessment and Reporting

12.1 Requirements and Advice
The information in this section of the syllabus relates to the Board of Studies’ requirements for assessing and
reporting achievement in the Preliminary and HSC courses for the Higher School Certificate.
Assessment is the process of gathering information and making judgements about student achievement for a
variety of purposes.
In the Preliminary and HSC courses those purposes include:

• assisting student learning
• evaluating and improving teaching and learning programs
• providing evidence of satisfactory achievement and completion in the Preliminary course
• providing the Higher School Certificate results.
Reporting refers to the Higher School Certificate documents received by students that are used by the Board
to report both the internal and external measures of achievement.
NSW Higher School Certificate results will be based on:

• an assessment mark submitted by the school and produced in accordance with the Board’s requirements
for the internal assessment program
• an examination mark derived from the HSC external examinations.
Results will be reported using a course report containing a performance scale with bands describing standards
of achievement in the course.
The use of both internal assessment and external examinations of student achievement allows measures and
observations to be made at several points and in different ways throughout the HSC course. Taken together,
the external examinations and internal assessment marks provide a valid and reliable assessment of the
achievement of the knowledge, understanding and skills described for each course.
Standards Referencing and the HSC Examination

The Board of Studies will adopt a standards-referenced approach to assessing and reporting student
achievement in the Higher School Certificate examination.
The standards in the HSC are:

• the knowledge, skills and understanding expected to be learned by students — the syllabus standards
• the levels of achievement of the knowledge, skills and understanding — the performance standards.
77
Both syllabus standards and performance standards are based on the aims, objectives, outcomes and content
of course. Together they specify what is to be learned and how well it is to be achieved.
Teacher understanding of standards comes from the set of aims, objectives, outcomes and content in each
syllabus together with:
– the performance description the summarise the different levels of performance of the course outcomes
– HSC examination papers and marking guidelines
– samples of students’ achievement on assessment and examination task.
12.2 Internal Assessment

The internal assessment mark submitted by the school will provide a summation of each student’s
achievements measured at points throughout the course. It should reflect the rank order of students and
relative differences between students’ achievements.
Internal assessment provides a measure of a student’s achievement based on a wider range of syllabus content
and outcomes than may be covered by the external examination alone.
The assessment components, weightings and task requirements to be applied to internal assessment are
identified on page 81. They ensure a common focus for internal assessment in the course across schools, while
allowing for flexibility in the design of tasks. A variety of tasks should be used to give students the
opportunity to demonstrate outcomes in different ways and to improve the validity and reliability of the
assessment.
12.3 External Examination

In Physics Stage 6, the external examinations include written papers for external marking. The specifications
for the examination in Physics Stage 6 are on page 82.
The external examination provides a measure of student achievement in a range of syllabus outcomes that can
be reliably measured in an examination setting.
The external examination and its marking and reporting will relate to syllabus standards by:
• providing clear links to syllabus outcomes
• enabling students to demonstrate the levels of achievement outlined in the course performance scale
• applying marking guidelines based on established criteria.
78
12.4 Board Requirements for the Internal

Assessment Mark in Board Developed Courses
For each course, the Board requires schools to submit an assessment mark for each candidate.
The collection of information for the HSC internal assessment mark must not begin prior to the completion of
the Preliminary course.
The Board requires that the assessment tasks used to determine the internal assessment mark must comply
with the components, weightings and types of tasks specified in the table on page 81.
Schools are required to develop an internal assessment program that:

• specifies the various assessment tasks and the weightings allocated to each task
• provides a schedule of the tasks designed for the whole course.
The school must also develop and implement procedures to:

• inform students in writing of the assessment requirements for each course before the commencement of
the HSC course
• ensure that students are given adequate written notice of the nature and timing of assessment tasks
• provide meaningful feedback on each student’s performance in
all assessment tasks.
• maintain records of marks awarded to each student for all assessment tasks
• address issues relating to illness, misadventure and malpractice
in assessment tasks
• address issues relating to late submission and non-completion
of assessment tasks
• advise students in writing if they are not meeting the assessment requirements in a course and indicate
what is necessary to enable the students to satisfy the requirements
• inform students about their entitlements to school reviews and appeals
to the Board
• conduct school reviews of assessments when requested by students
• ensure that students are aware that they can collect their Rank Order Advice
at the end of the external examinations at their school.
79
12.5 Assessment Components, Weightings and Tasks

Preliminary Course
The suggested components, weightings and tasks for the Preliminary course are detailed below.
Component Weighting Tasks may include:
Knowledge and understanding of:

Assignments
• the history, nature, and practice Fieldwork
of physics, applications and uses Model making
of physics and their implications Open-ended investigations
for society and the environment, 40 Oral reports
and current issues, research and Practical tests
developments in physics Reports
• kinematics and dynamics, Research projects
energy, waves, fields and matter Topic tests and examinations
Skills in planning and conducting

first-hand investigations and in
communicating information and 30
understanding based on these
investigations
Skills in scientific thinking,
problem-solving, and in
30
communicating understanding and
conclusions
Total 100
One task may be used to assess several components. It is suggested that 3–5 tasks are sufficient to assess the
Preliminary course outcomes.
80
HSC Course
The internal assessment mark for Physics Stage 6 is to be based on the HSC course only. Final assessment
should be based on a range and balance of assessment instruments.
Component Weighting Tasks may include:
Knowledge and understanding of:

Assignments
• the history, nature, and practice Fieldwork
of physics, applications and uses Model making
of physics and their implications Open-ended investigations
40
for society and the environment, Oral reports
and current issues, research and Practical tests
developments in physics Reports
• kinematics and dynamics, Research projects
energy, waves, fields and matter Topic tests and examinations
Skills in planning and conducting Note:

first-hand investigations and in No more than 50% weighting may be
communicating information and allocated to examinations and topic tests.
30
understanding based on these
investigations Assessment of knowledge, understanding
and skills developed through conducting
Skills in scientific thinking, first-hand investigations individually and
problem-solving, and in in teams, should be incorporated into the
30
communicating understanding and Core and Option as appropriate.
conclusions
Total 100
One task may be used to assess several components. It is suggested that 3–5 tasks are sufficient to assess the
HSC course outcomes.
81
12.6 HSC External Examination Specifications

Section I: Core (75 marks)
Part A (15 marks)
• There will be FIFTEEN multiple-choice questions.
• All questions will be compulsory.
• All questions will be of equal value.
• Questions will be based on the HSC Core Modules 9.2–9.4.
• There will be approximately equal weighting given to each HSC Core Module 9.2–9.4.
• Questions focusing on Core Module 9.1 will be incorporated into Part A.
Part B (60 marks)
• Short-answer questions.
• All questions will be compulsory.
• Question parts will be up to 8 marks.
• Questions will be based on the HSC Core Modules 9.2–9.4.
• There will be approximately equal weighting given to each HSC Core Module 9.2–9.4.
• Questions/question parts focusing on Core Module 9.1 will be incorporated into Part B.
Section II: Options (25 marks)

• There will be FIVE questions: one on each of the FIVE HSC options.
• Candidates must attempt ONE question.
• All questions will be of equal value.
• Each question will consist of several parts.
• Question parts will be up to 8 marks.
• Question part(s) focusing on Core Module 9.1 will be incorporated into each option question.
HSC Options list

• Geophysics
• Medical Physics
• Astrophysics
• From Quanta to Quarks
• The Age of Silicon.
82
12.7 Summary of Internal and External Assessment
Internal Assessment Weighting External Assessment Weighting
Knowledge and 40 A written examination paper

understanding consisting of:
First-hand investigations 30 Core Modules 75

Multiple-choice questions
Short-answer questions
Scientific thinking, 30 Options 25

problem-solving, and Short-answer part-questions
communication
Note: Assessment of Questions/question parts

knowledge, understanding, focusing on Core Module 9.1
and skills developed will be incorporated into both
through conducting first- the Core and Options sections
hand investigations of the paper.
individually and in teams
should be incorporated into
the Core and Option as
appropriate.
Marks 100 Marks 100
83
12.8 Reporting Student Performance Against Standards

Student performance in an HSC course will be reported against standards on
a course report. The course report contains a performance scale for the course describing levels (bands) of
achievement, an HSC examination mark and the internal assessment mark. It will also show, graphically, the
statewide distribution of examination marks of all students in the course.
Each band on the performance scale (except for band 1), includes descriptions that summarise the attainments
typically demonstrated in that band.
The distribution of marks will be determined by students’ performances against the standards and not scaled
to a predetermined pattern of marks.
84
Section 13
Appendix
The following information clarifies terminology used in this syllabus
Optical Fibre Consisting of a core where light rays travel and the cladding which is made of
a similar material with a slightly lower refractive index to cause total internal
reflection. Two types of material are used to manufacture fibres – glass (silica)
and plastic.
85

Physics Syllabus

Uploaded by

Copyright:

Available Formats

Physics Syllabus

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Physics Syllabus

Uploaded by

Copyright:

Available Formats

Physics

Amended October 2002

When you access the Material you agree:

Tel: (02) 9367 8111

ISBN 1 7409 9449 3

1 The Higher School Certificate Program of Study

• provide a curriculum structure which encourages students to complete secondary education;

• provide a flexible structure within which students can prepare for:

• provide formal assessment and certification of students’ achievements;

2 Rationale for Physics in the Stage 6 Curriculum

3 Continuum of Learning for Physics Stage 6 Students

Students will develop further skills in:

Students will develop positive values about and attitudes towards:

Practical experiences should emphasise hands-on activities, including:

6.1 Preliminary Course

6.2 HSC Course

The HSC course incorporates the study of:

The core, which includes:

states the overall purpose of the syllabus

define in broad terms, the knowledge and understanding,

define the intended results of teaching

Contents of each module

set within a background of ongoing assessment aimed at assisting students to learn

creative, responsible, scientifically literate, confident, ready to take their

Prescribed Focus Areas

The following Prescribed Focus Areas are developed in this syllabus:

Current issues, research and developments in physics

Knowledge and understanding

• developing scientific thinking and problem-solving techniques

6.4 Other Considerations

Animal Welfare Act

7 Objectives and Outcomes

Objectives Preliminary Course Outcomes HSC Course Outcomes

13. communicating P13. identifies appropriate H13. uses terminology and

the environment non-living components of living components of the

7.2 Key Competencies

8 Content: Physics Stage 6 Preliminary Course

8.1 Physics Skills

Preliminary Course Content

11.2 plan first-hand investigations to:

11.3 choose equipment or resources by:

Preliminary Course Content

12.2 gather first-hand information by:

12.3 gather information from secondary sources by:

12.4 process information to:

Preliminary Course Content

P14. draws valid 14.1 analyse information to:

14.2 solve problems by:

14.3 use available evidence to:

8.2 The World Communicates

Refer to the Science Stages 4–5 Syllabus for the following:

Students learn to: Students :

Students learn to: Students:

explain an echo as a reflection of a present graphical information, solve

Students learn to: Students:

3. Recent describe electromagnetic waves in plan, choose equipment or resources

discuss problems produced by the

Students learn to: Students:

outline how total internal reflection is

8.3 Electrical Energy in the Home