Scribd
Upload
369 views1 page

ETABS Columndesign

The document provides design details for a concrete column with a 450mm x 450mm cross section including rebar percentages and factored axial and moment capacities. It determines that the column's factored axial capacity of 724,420 N and biaxial moment capacities of -15,263,589 N-mm and -4,358,277 N-mm meet the design requirements based on the applied factored loads. Effective length factors and additional moment reduction factors are also calculated showing code compliance.

Uploaded by

Pujan Neupane
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
369 views1 page

ETABS Columndesign

The document provides design details for a concrete column with a 450mm x 450mm cross section including rebar percentages and factored axial and moment capacities. It determines that the column's factored axial capacity of 724,420 N and biaxial moment capacities of -15,263,589 N-mm and -4,358,277 N-mm meet the design requirements based on the applied factored loads. Effective length factors and additional moment reduction factors are also calculated showing code compliance.

Uploaded by

Pujan Neupane
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ETABS Concrete Design Engineer

Project
Subject

Indian IS 456-2000 COLUMN SECTION DESIGN Type: Ductile Frame Units: N-mm (Flexural Details)

Level : FF L=3000.000
Element : C13 B=450.000 D=450.000 dc=60.000
Section ID : C450D E=25000.000 fc=25.000 Lt.Wt. Fac.=1.000
Combo ID : DREY fy=500.000 fys=500.000
Station Loc : 0.000 RLLF=0.605

Gamma(Concrete): 1.500
Gamma(Steel) : 1.150

AXIAL FORCE & BIAXIAL MOMENT CHECK FOR Pu, Mu2, Mu3
Capacity Rebar Rebar Design Design Design
Ratio Area % Pu Mu2 Mu3
0.538 4476.000 2.210 724420.587 -152635890 -43582769

Factored Biaxial Moments


Non-Sway Sway Factored
Mns Ms Mu
Major Bending(M3) -14195468-29387301.0 -43582769
Minor Bending(M2)-226074.54 -152409815 -152635890

Slenderness Effects (IS 39.7.1) and Minimum Biaxial Moments (IS 39.2, 25.4)
EndMoment EndMoment Initial k*Ma Minimum Minimum
Mu1 Mu2 Moment Moment Moment Eccentrcty
Major Bending(M3) -4358276918164640.81-18883805.3 0.00014560853.79 20.100
Minor Bending(M2)-1.526E+08 63823594.5 -66052096 0.00014560853.79 20.100

Effective Length Factors (IS 25.2, Annex E)


K K Framing P-Delta Q K
Sway No-Sway Type Done? Factor Used
Major Bending(M3) 2.717 0.892 Ductile No 0.012 0.892
Minor Bending(M2) 1.768 0.769 Ductile No 0.009 0.769

Additional Moment Reduction Factor k (IS 39.7.1.1)


Ag Asc Puz Pb Pu k
202500.000 4476.000 3956625.07 854383.263 724420.587 1.000

Additional Moment (IS 39.7.1)


Consider Length Section KL/Depth KL/Depth KL/Depth Ma
Ma Factor Depth Ratio Limit Exceeded Moment
Major(M3) Yes 0.850 450.000 5.052 12.000 No 0.000
Minor(M2) Yes 0.850 450.000 4.357 12.000 No 0.000

ETABS v9.7.4 - File:HBL-aug 15 - N-mm Units August 18,2016 13:46

You might also like