T&B Unistrud PDF

In This Section…
Kindorf® Modular Metal Framing and Support System

Modular Metal Framing — Overview ..............................C-2–C-7
Channels.......................................................................C-8–C-13
Fittings and Strut Nuts ................................................C-14–C-15
Channel Fittings ..........................................................C-16–C-23
Bantam Channels........................................................C-24–C-25
Modular Metal Framing and Support System

Conduit, Cable and Pipe Supports ...............................C-26–C-35
Concrete Inserts..........................................................C-36–C-37
Beam Clamps and Hanger Rod Supports.....................C-38–C-49
Support Brackets ........................................................C-50–C-51
Surface Raceway and Lighting Support Systems.........C-52–C-67
Hardware and Threaded Components .........................C-68–C-74
Cable and Mounting Systems......................................C-75–C-79
Stainless Steel Channels.......................................................C-80
Aluminum Channels..............................................................C-81
Steel PVC Coated Channels .........................................C-82–C-83
Metallic Engineering Data and Specifications ..............C-84–C-93
Non-Metallic Channels and Accessories ......................C-94–C-97
Right Angle Slotted Angle ..........................................C-98–C-103
C-1
Modular Metal Framing — Overview
Kindorf® Channel Compatibility with 15⁄8" Strut

131⁄2 The Kindorf Channel System is designed so that
®
The Kindorf® System is designed so that most
the maximum number of support and framing accessories are compatible with 15⁄8" strut.
applications can be constructed with a minimum Conduit and pipe straps will work equally
amount of labor and pieces. well with 15⁄8" and 11⁄2" strut. In addition,
98% of 15⁄8" accessories are interchangeable
131⁄2
Uniqueness in Design with Kindorf® channel. Angle fittings can adapt
easily to the open side of any 15⁄8" strut and the
The 11⁄2" dimension in the channel, hole spacing
unique parallelogram nuts provide secure
and fittings means all parts fit together, no
attachment to both types of strut.
matter where they’re used, or at what angle.
This modular dimension provides maximum
flexibility in field applications, and results in Full Line of Support Products
9 saving inventory and labor dollars. The Kindorf® The Kindorf® channel system’s many advantages
channel exclusive Galv-Krom® finish provides are extended into a broad product offering
11⁄2" wide x 11⁄2" deep superior corrosion protection for all threaded including beam clamps, concrete inserts, lighting
⁄8" continuous open slot
7
10 ft. and 20 ft. lengths

components, channel and fittings. Through a supports, cable cleats and a variety of threaded
two-part process, the coating is applied on all components. This system is available in the
finished parts after fabrication — there is no largest selection of finishes and materials,
exposed surface where corrosion can start. including green coated, aluminum, stainless steel
and non-metallic. This, combined with a
Strength nationwide network of distributors and service
centers, makes the Kindorf® system a single
Even though the Kindorf® channel is slightly
source for supported metal-framing needs.
smaller in dimensions, it supports the same
weight as 15⁄8" channel.
C-2
Cuts come where they should:
Why Kindorf ® 11⁄2" Channel Kindorf
®
3 ll
6 ll
9 ll
12 ll
Saves You Labor Dollars Channel

1 1⁄2 Kindorf 1'
1 1⁄2
1 1⁄2
Kindorf® Channel’s 11⁄2" is Much More
than a Cross-Section Dimension
The 11⁄2" with Kindorf® channel is truly a modular dimension. The channel Standard
Channel
height, width and prepunched hole spacings are all 11⁄2". The angle fittings
1 1⁄2 158 Strut
and the bolt holes in the angle fittings are all 11⁄2" dimensions. Scribe marks
1 5⁄8
are located at 11⁄2" intervals to mark the midpoint between holes and every

6" on the side for easy measurement. 1 7⁄8
6" 12" 18"
Jobsite adaptability and structural integrity are the key factors in making
strut channel an economical solution to metal framing needs. Kindorf®
channel, with its 11⁄2" modular dimensions, enables the installer to do
11⁄2
more work with fewer pieces and less labor dollars.
11⁄2 1 ⁄2
1
11⁄2
Here’s What the Modular Dimension Can Do for You
Channel with bolt holes 9⁄16" dia. holes
Using a 15⁄8" channel with hole spacings on 17⁄8" centers requires numerous 11⁄2 on 11⁄2" centers for 11⁄2" bolts.
fittings and, in many cases, limits the joint fastening to the open side of the
11⁄2
channel. Field drilling and welding, plus the need for extra fittings, become
the rule rather than the exception. With constant 11⁄2" dimensions throughout
the system, many structural joints can be made with a minimum of fittings. 11⁄2
Consider the following: 1 ⁄2
1
1. The Entire Section Can be Used.

You are not limited to using only the open-slot side because holes
line up on channel and fittings. Using the scribe marks ensures the
fittings will work and a straight cut is made. Kindorf® 11⁄2 Holes in fittings also line up.
All holes line up — all the time.
2. Considerable Field Drilling and Welding Eliminated.
The holes are already there and they are usable. Back-to-back,
Fastening on bolt-hole side.
side-to-back, side-to-side — all combinations that can be made
using B-995 Kindorf® channel.
11⁄2
3. Field Cutting and Layout Made Simple.

8 scribe marks = 1 ft. Simply count the marks and cut. Position of holes
ensures balanced support for trapezes on every piece, thus keeping waste
to an absolute minimum.
11⁄2
4. Modular Fittings Fasten to Bolt Side or Slot Side —
Unique Stud Nut. 15⁄8" Strut Clamping nut or hex head nut may be
Kindorf® framing fittings are engineered for versatile use — to meet ⁄8" holes cause misalignment.
7 used for attachment and security of
fittings to either side of channel.
the greatest number of framing combinations with maximum rigidity
and security. Fittings may be fastened to the channel on either
the bolt-hole side or the slot side.
The matching 11⁄2" dimensions of channel bolt holes and fitting bolt Fastening on slot side.
holes provide a fast alignment and quick bolting. Fastening on the
slot side provides infinite placement of the nut to match bolting 11⁄2
requirements. Either way results in simple “building block” erection
and permits multiple application of fittings. With the B-911SN Stud Nut,
blind fastening of angles and fixtures is eliminated.
11⁄2
Stud nut saves time, reduces labor — Spring nut holds in position without
like having an extra pair of hands. support. Inserts easily in channel and
sets automatically — cannot rotate.
C-3
Let the Modular 11⁄2" Dimension Work for You by Saving

Labor and Inventory Dollars!
Why Kindorf® 11⁄2" Channel
Saves You Inventory Dollars

Fewer Pieces Do More Work.
By making equal use of the back of the channel, the sides of the channel
(B-995 see page C-13) and the open slot, your options are increased.
Combine this with three simple fittings that are 11⁄ 2" wide and have 11⁄2"
hole layout, and you have the simplest and most versatile channel system
on the market today.
By simply stocking B-995 prepunched channel and three angle fittings,
By stocking a single-channel system and only three angle fittings, a great number of joints can be made.
a multitude of jobs can be done.
With fewer pieces doing more work, ordering efficiency is increased
and investment dollars are decreased.
Any way you look at it — Kindorf® strut can save you money.
One Kindorf® B-915

Two-Hole Connector Will Do:
One Kindorf® B-916

Three-Hole Connector Will Do:
One Kindorf® B-917

Five-Hole Connector Will Do:
C-4
Galv-Krom® Electro-Galvanized Finish

Hexavalent Galv-Krom® Is OSHA Safe.
Over the past several months, there have been many questions
OSHA
S A F E !
about hexavalent chromium in the metal framing industry. Many of these

questions relate to the changes made by OSHA. In 2006, the Occupational
Safety and Health Administration (OSHA) published a revised standard which
includes changes related to occupational exposure to hexavalent chromium
(Cr VI). The revised standard was promulgated on February 28, 2006 with
the compliance provisions taking effect on November 27, 2006 for most

businesses. Cr VI can be found in many metal framing products, such
as the hexavalent version of Galv-Krom® finish for Kindorf® channel.
• Occupational Exposure Limit — The changes related to

Cr VI address the occupational exposure limit. Previously,
this level was 52 micrograms per cubic meter (g/m3)
of air. This limit has now been reduced to 5 g/m3 of air.
Additionally, an “action level” has also been established at
2.5 g/m3 of air. If exposure to Cr VI exceeds these levels,
comprehensive exposure-control efforts must be
implemented to protect workers.
New Trivalent Galv-Krom® Finish Is RoHS Compliant
• OSHA Testing for Galv-Krom® Finish — Thomas & Betts
conducted documented third-party testing for the Cr VI In 2007, Thomas & Betts introduced the new and improved
occupational exposure of a typical worker when fabricating trivalent Galv-Krom® finish. Galv-Krom® finish is a combination
Galv-Krom® products. A certified industrial hygienist of .5 mils electro-plated zinc and a gold trivalent chromium finish.
conducted the testing. The testing was done over one full
work day following the OSHA protocol, with air sampling • Gold Trivalent Chromium Finish — The new Galv-Krom®
being performed to produce an 8-hour time-weighted finish features a trivalent chromium formulation that
average exposure for the affected worker. The provides all the features and protection of hexavalent
TWA result was .00001 micrograms of Cr VI per cubic chromium (CR VI) without the use of this chemical.
meter of air (g/m3). This level is significantly below the hexavalent chromium is a substance that is restricted
2.5 g/m3 in the OSHA standard. by some standards such as the European Union directive
• Hexavalent Galv-Krom® Finish Is OSHA Safe — Based on the restriction of the use of certain hazardous
on this testing, activities such as normal handling, cutting, substances in electrical and electronic equipment (RoHS).
grinding and welding of Galv-Krom® products are within • RoHS Compliant — One great feature for the new Trivalent
the OSHA requirements related to occupational exposure Chromium formulation is RoHS compliance. Because
to hexavalent chromium. hexavalent chromium is a substance that is restricted by
• Certified Industrial Hygienist Report Available — The test RoHS, moving away from a hexavalent formulation to the
report certified by an independent industrial hygienist on new trivalent formulation will make the performance of
this occupational exposure testing is available to Galv-Krom® coating available to customers affected by
Thomas & Betts customers who require such documentation. RoHS and other standards like RoHS around the world.
This testing was conducted to the OSHA ID-215 ion • Trivalent Galv-Krom® Finish Is OSHA Safe — As mentioned
chromatography method for analytical air sampling previously, the hexavalent formulation of the Galv-Krom®
and meets the latest OSHA requirements. The findings finish was safe with regard to the revised 2006 OSHA
are reported by a Certified Industrial Hygienist (CIH) standard. This new trivalent formulation of the Galv-Krom®
and are recognized by OSHA as suitable for questions finish does not contain any hexavalent chromium and
regarding occupational exposure to hexavalent chromium. therefore does not fall under the scope of the OSHA
For more details on this report, contact Thomas & Betts standard. As a result, the new Trivalent Galv-Krom® finish,
Technical Services at 888.862.3289. just like the Hexavalent Galv-Krom® finish, is OSHA
compliant.
• ASTM B633 Specification — The improved Galv-Krom®
finish is applied in compliance with ASTM B633 coating,
the same standard as used previously. This standard
outlines electro-deposited coatings of zinc on steel.
C-5
Galv-Krom ® Electro-Galvanized Finish (continued)

Soak
Degreasing Electro Sulfuric Chromate
Chemical Cleaner Rinse Acid Bath Rinse Zinc Tank Rinse Rinse Prep Chromate Dip Rinse Dryer
Solution Metal is Live, clear Prepares Live, clear Electrically Chemically Live, clear Polishing A gold Live, clear Forced hot air is
removes negatively water the metal water applies the treated water agent to trivalent water circulated around
bulk of charged to rinse. by etching rinse. zinc metal rinse rinse. prepare chromium rinse. the strut until dry.
oil and remove the surface coating. water. part for conversion
grease minute for the zinc chromate. coat is applied
buildup. surface application. to the zinc.
particles.
Kindorf® Galv-Krom® Finish • Clean Finish — For pre-galvanized finishes, the zinc finish
is applied before the strut is manufactured. That means
Outperforms the Competition all the oil and grime collected while the steel is formed
into strut remains on the strut for the customer. Because
Galv-Krom® finish is applied after fabrication, the oils and
grime collected during the manufacturing process are
thoroughly cleaned off during plating. This creates a
finished product that leaves no residue on your hands
when handling
• Paintable Surface — The new Galv-Krom® finish
uses nano technology to provide a nonporous and non-
crystalline surface. Not only does this feature provide
enhanced corrosion protection, but also provides an
excellent bond for the paint of your choice
• No More White Rust — With pre-galvanized strut, a
common quality headache is the formation of white rust
on the zinc finish. With Galv-Krom® finish, the trivalent
chromium finish is applied over the zinc, to seal in the
zinc beneath and stop the formation of white rust
• Great Electrical Conductivity — Unlike paint or enamel,
the Galv-Krom® surface offers a minimum of electrical
resistance so that electrical applications are easily
The new and improved Galv-Krom® finish provides many benefits.
First, it provides continued safety within OSHA guidelines. Second,
grounded when grounding is needed
the trivalent formulation provides RoHs compliance. But most
important of all, the new Kindorf® Galv-Krom® finish provides a level
of performance unmatched by the competion. Metal Framing Channel Finish
Corrosion Resistant Testing, ASTM B117
• Superior Corrosion Protection — One hallmark of the 1100

Galv-Krom® finish is the superior corrosion protection it 1000
900
provides. In the ASTM B117 salt spray test, the new Galv-
Salt Spray Hours
800
Krom® finish provided improved protection to the previous 700
Hexavalent formulation, and substantially more protection 600
than painted finishes or G-90 Pre-Galvanized (see chart at 500
right). This outstanding corrosion protection means more 400
versatile installations and more service life for Galv-Krom® 300
finished products 200
100
• Strong Abrasion Resistance — The Galv-Krom® finish 0
Industry Epoxy Industry SilverGalv® New
won’t chip or peel like a green-painted strut product. Enamel Green Pre-Galvanized Trivalent
It stands up to rough handling Green G90 Galv-Krom
C-6
Finishes Materials
®
1. Galv-Krom 1. Standard Steel
Commonly referred to as “gold,” the Galv-Krom® finish is a combination The standard Kindorf® Channel is made from high-quality ASTM A570
of .5 mils electro-plated zinc and a gold trivalent chromium finish, offering Grade 40 carbon steel sheet. These sections are cold formed into a unique
superior rust protection and excellent electrical conductivity. and modular profile by an efficient roll forming process. Additionally, the
process “cold works” the steel is to give it greater mechanical properties.
2. SilverGalv® (Suffix EG)
Often referred to as “zinc plated” or “electroplated zinc,” the 2. Extruded Aluminum (Suffix AL)
SilverGalv® finish applies .5 mils of zinc and a clear conversion coat. For more corrosive environments, T&B also offers extruded aluminum

Electro-galvanizing is available for channel as well as small fittings, channel sections. These section are nearly identical to their steel
hardware and threaded products. counterports. Aluminum channel is made from 6063 Aluminum
and heat treated to a T-6 specification.
3. Pre-galvanized Steel (Suffix PG)
In addition to the standard Galv-Krom® finish, all Kindorf® channels 3. Non-Metallic (Suffix N)
are available in pre-galvanized steel. This material is identical to the Kindorf® channels are also available in fiberglass-reinforced polyester
standard steel except for its ASTM G-90 zinc coating. This coating and vinyl ester. These products are pultruded into shapes similar to
is applied at the steel mill prior to the channel fabrication. steel channels. They offer a high degree of corrosion protection and
are very lightweight.
4. Green Coated (Suffix GR)
Green urethane powder resins are applied electrostatically to the steel after 4. Stainless Steel (Suffix SS)
fabrication. Once the material is completely covered with the powdered-form For the most corrosive environments, T&B offers Type 304 Stainless Steel
urethane, it proceeds through a 400° baking process for ten minutes, channel sections and accessories. Type 316 stainless available upon
creating a chemical bond. This results in a minimum of 1.5 mil thickness request. Contact your local sales rep. These products are identical to their
of urethane coating providing excellent resistance to chipping or peeling. carbon steel counterparts except for a much greater corrosion resistance.
5. Hot-Dipped Galvanized (Suffix HD) Warning

The material is zinc coated after fabrication providing total product Load tables, charts and design criteria provided in this catalog
protection on all surfaces. The fabricated channel or fitting is suspended are intended as guides only. Selection of proper product, installation
and then dipped into tanks of hot zinc for a prolonged period, creating intervals, erection and placement are the responsibility of the user.
a coherent bond. The result is superior corrosion resistance as compared
to pre-galvanized material. Hot-dipped galvanizing is not recommended Kindorf® products are intended to be used for the support and bracing
for threaded products, considering the zinc coating thickness will often of fixtures, cable, pipe and conduit. Improper use or installation may
disrupt the threads. result in injury to persons or damage to property.
Kindorf® hot-dipped galvanized channel is in conformance with ASTM Material and finish specifications are subject to change without notice.
Specifications A-123 (formerly A-386) and A-153.
Kindorf® channels maintain a minimum 1.5 ounces of zinc per square foot
of steel or 2.5 mils (ASTM A-123, Thickness Grade 65). This finish is also
referred to as “Hot-dipped galvanized after fabrication.”
6. PVC Coated (Prefix P)

A polyvinyl chloride (PVC) plastic coating is fused to the channel, fitting
or accessory after fabrication by immersing the part in fluidized PVC tanks.
The fused-melt mixed powder PVC coating thickness is 15 mils (.015") plus
or minus five mils. PVC material is a thermoplastic and will soften in high
temperatures. An inherent weakness with PVC coatings occurs when field
alterations are applied, such as cutting or drilling. These acts disrupt the
sealed PVC product and warrant field touch-up. Thomas & Betts cannot
be held responsible for field-altered PVC coated products.
C-7
Channels
Channels
Kindorf® channel is a rugged, heavy-gage structural-quality steel channel preformed in a “U” shape with a continuous open slot the entire length. The turned-in
edges serve as retaining points for the nuts and bolts assembly of fittings to the channel. The shape of the channel permits infinite adjustability of the clamping
nut simply by gliding it along the channel to the desired position. Spring-tensioned nuts are generally used for positioning overhead or in vertical channel
installations. A stud nut (with spring) is provided for easy mounting of cabinets and equipment.
Channel Nuts are specially shaped as parallelograms with biting edges so that when tightened with normal pressure on the bolt, the nut clamps the sides
of the channel together in a secure connection, which reinforces the rigidity of the channel itself. The nut rests on the “lips” of the channel slot.
Steel Channels
• Galv-Krom® finish • 10 ft. and 20 ft. lengths
Solid Base Half-Slot Base

• 9⁄16" x 7⁄8" slots on 11⁄2" centers 3⁄4" from end
B-906 B-901
B-907HS
11⁄2" x 3⁄4" x 14 ga. 11⁄2" x 17⁄8" x 12 ga.
11⁄2" x 3⁄4" x 14 ga.
B-905HS (12 ga.)

B-900 (12 ga.) B-905HS-M (14 ga.) B-903HS
B-900-M (14 ga.) B-902 11⁄2" x 3" x 12 ga.
1 1⁄2" x 1 1⁄2" 11⁄2" x 3" x 12 ga.
Bolt Hole Base

Bolt Hole Base • Bolt holes on 3 sides,
• 9⁄16" diameter 9
⁄16" diameter
bolt holes on B-907 B-909 on 11⁄2" centers
B-995 (12 ga.)
11⁄2" centers 11⁄2" x 3⁄4" x 14 ga. 11⁄2" x 1 7⁄8" x 12 ga.
3
⁄4" from end B-995-M (14 ga.)
3
⁄4" from end 11⁄2" x 11⁄2"
T-Slot Base
B-905 (12 ga.)
B-905-M (14 ga.) B-903
11⁄2" x 11⁄2" 11⁄2" x 3" x 12 ga. B-904
11⁄2" x 11⁄2" x 12 ga.
Kindorf® Channels — How To Order

Welded Combinations Add the suffix designation of the desired combination to the regular channel catalog number.
All Kindorf® channels are available in a variety (Example: Two B-900 channels back to back are ordered as B-900-2A.)
of combinations — some are shown below.
2A 2B 2C 2D 3A 3C 3D
Special lengths
10- and 20-ft. lengths — steel may be ordered.
C-8
Channels
Channels (continued)
B-900 Channel — 11⁄2" x 11⁄2" B-901 Channel — 11⁄2" x 17⁄8"
Connection by means of continuous slot. For heavier load requirements.
Connection by means of continuous slot.
11⁄2"
11⁄2"

Properties of Section
SECTIONAL MATERIAL Properties of Section
CAT. NO. AREA THICKNESS LBS/FT.
SECTIONAL MATERIAL
7
⁄8"
B-900 0.345 0.104 1.206 7
⁄8" CAT. NO. AREA THICKNESS LBS/FT.
B-900-M 0.217 0.074 0.74
B-901 0.595 0.104 2.028
X-X AXIS Y-Y AXIS
I S R I S R 11⁄2" X-X AXIS Y-Y AXIS 17⁄8"
0.101 0.123 0.535 0.129 0.175 0.603 I S R I S R
0.018 0.041 0.272 0.077 0.105 0.559 0.263 0.251 0.665 0.238 0.309 0.632
CAT. NO. DESCRIPTION MATERIAL CAT. NO. DESCRIPTION MATERIAL

B 900 10 Galv-Krom® 12 ga. B-901-10 Galv-Krom® 12 ga.
B-900-20 Galv-Krom® 12 ga. B-901-20 Galv-Krom® 12 ga.
B-900-M-10 Galv-Krom® 14 ga. B-901-10-EG SilverGalv® 12 ga.
B-900-M-20 Galv-Krom® 14 ga. B-901-20-EG SilverGalv® 12 ga.
B-900-10-EG SilverGalv® 12 ga.
B-900-20-EG SilverGalv® 12 ga. Use H-113-B bolts and B-910-1/2 or B-911-1/2 steel nuts for mounting fittings. 196#/C ft.
B-900-M-10-EG SilverGalv® 14 ga.
CAT. NO. DESCRIPTION JOINER END CAPS
Use H-113-B bolts and B-910-1/2 or B-911-1/2 steel nuts for mounting fittings.
B-901 12 ga. Galv-Krom® G978C G-966
B-900, 162#/C ft. B-900-M, 107#/C ft.
B-901HD Hot-dipped galvanized — —
Use H-113-B bolts and B-910-1/2 or B-911-1/2 steel nuts for mounting fittings. 196#/C ft.
CAT. NO. DESCRIPTION JOINER END CAPS
B-900 12 ga. Galv-Krom ®
— —
B-900-M 14 ga. Galv-Krom® — —
B-900-10GR Green powder coated — —
B-900-20GR Green powder coated G978 —
B-900-10PG Pre-galvanized G978A G967
B-900-20PG Pre-galvanized G1503S —
B-900-10HD Hot-dipped galvanized — —
B-900, 162#/C ft. B-900-M, 107#/C ft.
C-9
Channels
B-902 Channel — 11⁄2" x 3" B-903 Channel — 9
⁄16" 11⁄2"
11⁄2" x 3"
Connection by means of continuous slot.

Connection by means of continuous slot
or 9⁄16" holes on 11⁄2" centers. ⁄8"
7
11⁄2"
3"
7
⁄8" 11⁄2"
Properties of Section
SECTIONAL MATERIAL CAT. NO. DESCRIPTION MATERIAL
CAT. NO. AREA THICKNESS LBS/FT.
B-903-10 Galv-Krom® 12 ga.
B-902 0.837 0.104 2.825 B-903-20 Galv-Krom® 12 ga.
3"
X-X AXIS Y-Y AXIS B-903-10-EG SilverGalv® 12 ga.
I S R I S R B-903-20-EG SilverGalv® 12 ga.
0.909 0.552 1.042 0.363 0.471 0.658 Use H-113-B bolts and B-910-1/2 steel nuts for mounting fittings.
277#/C ft.
CAT. NO. DESCRIPTION JOINER END CAP
CAT. NO. DESCRIPTION MATERIAL B-903 12 ga. Galv-Krom® G978-D —

B-903HD Hot-Dipped Galvanized G3003S —
B 902 10 Galv-Krom® 12 ga.
Use H-113-B bolts and B-910-1/2 steel nuts for mounting fittings.
B-902-20 Galv-Krom® 12 ga.
B-902-10-EG SilverGalv® 12 ga. 277#/C ft.
Use H-113-B bolts and B-910-1/2 steel nuts for mounting fittings. B-903H
285#/C ft.
Channel —
11⁄2" x 3"
7
⁄8"
B-902-10 12 ga. Galv-Krom® — —
B-902-20 12 ga. Galv-Krom® G978-D G957
B-902-10HD Hot-dipped galvanized G-3003S —
285#/C ft. 3"
11⁄2"
7
⁄8"
11⁄2"
CAT. NO. DESCRIPTION MATERIAL

B 903HS 10 Galv-Krom® 12 ga.
B-903HS-20 Galv-Krom® 12 ga.
B-903HS-10-EG SilverGalv® 12 ga.
277#/C ft.
C-10
Channels
B-904 Channel — 11⁄2"
B-905 Channel —
11⁄2" x 11⁄2" 11⁄2" x 11⁄2" 9
⁄16" 11⁄2"
Connections by means of continuous

Connection by means of continuous slot or T-slots slot or 9⁄ 16" holes on 11⁄ 2" centers that
on 11⁄2" centers in base side of channel. ⁄4"
3
match holes in B-900 series fittings.
1" 7
⁄8"

11⁄2"
11⁄2"
7
⁄8"
11⁄2" 11⁄2"
CAT. NO. DESCRIPTION CAT. NO. DESCRIPTION MATERIAL

B-904 10 12 ga. Galv-Krom® B 905 10 Galv-Krom® 12 ga.
B-904HD Hot-Dipped Galvanized B-905-20 Galv-Krom® 12 ga.
For attachment to continuous slot use H-113-B bolts and B-910-1/2 steel nuts. B-905-M-10 Galv-Krom® 14 ga.
For attachment to T-slots use F-739 brackets 155#/C ft.
B-905-M-20 Galv-Krom® 14 ga.
B-905HS Channel — B-905-M-20-EG SilverGalv® 14 ga.
11⁄2" x 11⁄2" Use H-113-B bolts and B-910-1/2 or B-911-1/2 steel nuts for mounting fittings.
Scribe marks designate midpoint between holes for accurate field cutting.
11⁄2" B-905, 158#/C ft. B-905-M, 102#/C ft.
7
⁄8"
B-905 12 ga. Galv-Krom® — —
9
⁄16" B-905-M 14 ga. Galv-Krom® — —
7
⁄8" B-905-10GR Green Coated — —
B-905-20GR Green Coated — —
11⁄2"
B-905-10PG Pre-Galvanized — —
B-905-20PG Pre-Galvanized — —
B-905-10HD Hot-Dipped Galvanized — —
11⁄2" B-905-20HD Hot-Dipped Galvanized — —
CAT. NO. DESCRIPTION MATERIAL Scribe marks designate midpoint between holes for accurate field cutting.
B-905, 158#/C ft. B-905-M, 102#/C ft.
B-905HS-M-10 Galv-Krom® 14 ga.
B-905HS-M-20 Galv-Krom® 14 ga.
B-905HS-M-10-EG SilverGalv® 14 ga.
B-905HS-M-20-EG SilverGalv® 14 ga.
Scribe marks designate midpoint between holes for accurate field cutting.
B-905, 158#/C ft. B-905-M, 102#/C ft.
C-11
Channels
Connection by means of continuous slot. Connection by means of continuous slot

or 9⁄16" holes on 11⁄2" centers.
9
⁄16"
11⁄2"
Properties of Section 7
⁄8"
7
⁄8"
SECTIONAL MATERIAL
AREA THICKNESS LBS/FT. 11⁄2"
0.521 0.104 1.776
X-X AXIS Y-Y AXIS
3
⁄4"
I S R I S R 11⁄2"
0.155 0.179 0.545 0.2 0.259 0.619

CAT. NO. DESCRIPTION MATERIAL B-907-10 Galv-Krom ®
14 ga.
B 906 10 Galv-Krom® 14 ga. B-907-20 Galv-Krom® 14 ga.
B-906-20 Galv-Krom® 14 ga. B-907-10-EG SilverGalv® 14 ga.
B-906-10-EG SilverGalv® 14 ga. B-907-20-EG SilverGalv® 14 ga.
B-906-20-EG SilverGalv® 14 ga. Use H-113-A bolts and B-910-1/2 or B-912-1/2 steel nuts for mounting fittings.
Use H-113-A bolts and B-910-1/2 or B-912-1/2 steel nuts for mounting fittings. Holes on B-900 series fittings match channel holes.
Steel 75#/C ft. Scribe marks on steel channel designate midpoint between holes for accurate field cutting.
Steel 71#/C. ft.
B-907HS Channel — 11⁄2" x 3⁄4"

⁄16"
9 CAT. NO. DESCRIPTION JOINER
B-907 14 ga. Galv-Krom B948
B-907-10GR Green Coated B948
B-907-20GR Green Coated B948
7
⁄8"
B-907-10PG Pre-Galvanized B948
7
⁄8" B-907-20PG Pre-Galvanized B948
11⁄2" B-907-10HD Hot-Dipped Galvanized B948
B-907-20HD Hot-Dipped Galvanized B948
⁄4"
3
Use H-113-A bolts and B-910-1/2 or B-912-1/2 steel nuts for mounting fittings.
Holes on B-900 series fittings match channel holes.
11⁄2"
Scribe marks on steel channel designate midpoint between holes for accurate field cutting.
Steel 71#/C. ft.
Use H-113-A bolts and B-910-1/2 or B-912-1/2 steel nuts for mounting fittings.
Holes on B-900 series fittings match channel holes.
Scribe marks on steel channel designate midpoint between holes for accurate field cutting.
Steel 71#/C. ft.
C-12
Channels
For heavier load requirements. Connection by means Connection by means of continuous slot
of continuous slot or 9⁄16" holes on 11⁄2" centers. or 9⁄ 16" holes on 1 1⁄ 2" centers on three sides
which match holes in B-900 series fittings.
9
⁄16" 11⁄2" 9
⁄15" 11⁄2"

7
⁄8" 7
⁄8"
17⁄8"
11⁄2"
11⁄2"
11⁄2"
CAT. NO. DESCRIPTION MATERIAL CAT. NO. DESCRIPTION MATERIAL

B 909 10 Galv-Krom® 12 ga. B 995 10 Galv-Krom® 12 ga.
B-909-20 Galv-Krom® 12 ga. B-995-20 Galv-Krom® 12 ga.
B-909-10-EG SilverGalv® 12 ga. B-995-M-10 Galv-Krom® 14 ga.
B-909-20-EG SilverGalv® 12 ga. B-995-M-20 Galv-Krom® 14 ga.
Use H-113-B bolts and B-910-1/2 or B-911-1/2 steel nuts for mounting fittings. B-995-10-EG SilverGalv® 12 ga.
118#/C. ft. B-995-20-EG SilverGalv® 12 ga.
CAT. NO. DESCRIPTION JOINER
B-909 12 ga. Galv-Krom G978-C
150#/C ft. Scribe marks designate midpoint between holes for accurate field cutting.
B-909HD Hot-Dipped Galvanized G978-C
Standard 10 ft. lengths
118#/C. ft.
C-13
Fittings and Strut Nuts
Channel Nuts Trapnut® Strut Fastener

Kindorf® Channel Nuts are manufactured from mild steel
and are case hardened.
Design Data
Kindorf® self-aligning channel nuts are designed to provide resistance to pull

out and resistance to side slip in excess of the full strength of the channels H 122 3⁄8 EG
H 122 3⁄8
with which they are used. The extreme resistance to side slip results from Trapnut™ Strut Trapnut™ Strut
the unique design of the alternate teeth, spaced and designed to develop Fastener Galv-Krom® Fastener SilverGalv®
a wedging action that increases with pressure or load.
SIZE DESIGN STD.

CAT. NO. DESCRIPTION (IN.) LOAD LBS. CTN.
H 122 1/4 1
⁄4" Galv-Krom® 1
⁄4 150 50
H 122 3/8 3
⁄8" Galv-Krom® 3
⁄8 590 50
H 122 1/2 1
⁄2" Galv-Krom® 1
⁄2 1,080 50
H 122 1/4 EG 1
⁄4" SilverGalv® 1
⁄4 150 50
H 122 3/8 EG 3
⁄8 590 50
H 122 1/2 EG 1
⁄2 1,080 50
H 122 1/4 SS6 1
⁄4" Type 316 Stainless Steel 1
⁄4 150 50
H 122 3/8 SS6 3
⁄8 590 50
H 122 1/2 SS6 1
⁄2 1,080 50
Channel Nuts — Standard Finish:

Load Ratings of Steel Channel and Insert Nuts
(B-910-1/2 or B-911-1/2) when used in slot of 12 ga. Kindorf® channel
Galv-Krom®
and tightened to a torque of 50 ft. Pounds are as follows: B-910 Series
Withdrawal resistance to pull out safe-load rating = 1,600 lbs.
Slip resistance safe-load rating = 400 lbs. For use with all Kindorf® channels
(B-910-1/2 or B-912-1/2) when used in slot of 14 ga. Kindorf channel
and tightened to a torque of 50 ft. Pounds are as follows: CAT. NO. SIZE (IN.) THICKNESS (IN.) WT. LBS./C
Withdrawal resistance to pull out safe-load rating = 1,300 lbs. Slip B 910 1/4 1
⁄4–20 3
⁄16 7.5
resistance safe-load rating = 400 lbs. B-910-5/16 5
⁄16–18 5
⁄16 7.3
B-910-3/8 3
⁄8–16 5
⁄16 9.15
Load ratings are based on safety factor of 3. B-910-1/2 1
⁄2–13 3
⁄8 9.9
Load Ratings for B-910 Strut Nuts

BC-910 Universal Cone Nut CHANNEL SLIP TEST PULL TEST
NUT SIZES (IN.) RATING RATING
Eliminates the inventory and installation hassles of conventional spring nuts.
Fits all 15⁄8" channel, regardless of depth, with a simple twist of your thumb.
1
⁄4 300 500
Pliable nylon cone secures the nut in place through the entire range of
3
⁄8 750 1000
construction site temperatures.
1
⁄2 1,200 2000
If connections will be subjected to dynamic or seismic loading conditions,
contact the factory for design assistance.
Screw Threads 1. All ratings have safety factor of 3 applied.
THREAD SIZE B J C D 2. Load ratings are for Static Applications.
Threads per inch 20 18 16 13
Design Torque (ft.–lbs.) 6 11 19 50
All threaded products are American Standard thread, free fit class 2.
Galv-Krom® hardware finish is standard for all Superstrut products. This is a
multi-process finish of electro-plated zinc, followed by gold-colored zinc dichromate
to give excellent corrosion resistance and a superior paint base.
Standard Finish – Galv-Krom®, unless otherwise stated.
C-14
Fittings and Strut Nuts
B-911 Series B-914 Series

Self-holding clamping nut with spring attached.
For use with 11⁄2" deep channels.
Square nuts for use with channel
CAT. NO. SIZE (IN.) THICKNESS (IN.) WT. LBS./C and spot-type concrete inserts. 11⁄4" Sq.
B 911 1/4 1
⁄4 –20 3
⁄16 8
B-911-5/16 ⁄16 –18
5 5
⁄16 8.25
B-911-3/8 3
⁄8 –16 5
⁄16 10 CAT. NO. SIZE (IN.) THICKNESS (IN.) WT. LBS./C
B-911-D-3/8* 3
⁄8 –16 5
⁄16 12
B-911-1/2 1
⁄2 –13 3
⁄8 10 B 914 1/4 1
⁄4–20 3
⁄16 10.50

B-911-D-1/2* 1
⁄2 –13 7
⁄8 13 B-914-3/8 3
⁄8–16 5
⁄16 13.25
B-914-1/2 1
⁄2–13 3
⁄8 14.00
* For clamping nuts with spring for 3" deep channels add suffix D to catalog number.
B-914-5/8 5
⁄8–11 3
⁄8 14.00
B-914-3/4 3
⁄4–10 3
⁄8 12.00
B-914-7/8 7
⁄8–9 3
⁄8 10.50
B-911-SN Series B-914-3/8P 3
⁄8–18** 3
⁄8 12.00
B-914-1/2P 1
⁄2–14** 3
⁄8 11.00
** Standard Pipe Threads.
Stud nut self-holding clamping nut with spring attached. Standard finish: Galv-Krom®.
Located Square
CAT. NO. SIZE (IN.) THICKNESS (IN.) WT. LBS./C
Washers
B 911 3/8 SN1† 3
⁄8 –16 3
⁄16 12.5
B-911-3/8-SN2† 3
⁄8 –16 5
⁄16 13.0 19⁄16" Sq.
B-911-1/2-SN1† 1
⁄2 –13 5
⁄16 16.0
B-911-1/2-SN2† 1
⁄2 –13 3
⁄8 17.0
†B-911-3/8-SN1, Stud: 3⁄8 Dia., 1" Long and B-911-3/8-SN2, Stud: 3⁄8 Dia., 1 1⁄4" Long.
Accepts Kindorf® Nuts H-114C (hex), H-116-C (square). CAT. NO. BOLT SIZE (IN.) STD. CTN.
B-911-1/2-SN1, Stud: 1⁄2 Dia., 1" Long. and B-911-1/2-SN2, Stud: 1⁄2 Dia., 1 1⁄4" Long.
AB-241L-1/4 1
⁄4 100
Accepts Kindorf® Nuts H-114D (hex), H-116-D (square). AB-241L-5/16 5
⁄16 100
AB-241L-3/8 3
⁄8 100
AB-241L-1/2 1
⁄2 100
B-912 Series AB-241L-5/8 5
⁄8 100
GoldGalv® is standard finish.
Self-holding clamping nut with spring attached.
For use with 3⁄4" deep channels. Add “EG” suffix for SilverGalv®.
CAT. NO. SIZE (IN.) THICKNESS (IN.) WT. LBS./C

Square Washers
B 912 1/4 1
⁄4 –20 3
⁄16 8.0
B-912-5/16 ⁄16 –18
5 5
⁄16 7.5 19⁄16" Sq.
B-912-3/8 3
⁄8 –16 5
⁄16 9.5
B-912-1/2 1
⁄2 –13 5
⁄16 9.8
Standard finish: Galv-Krom®
CAT. NO. BOLT SIZE (IN.) STD. CTN.
BC-910 Series AB-241-1/4 ⁄4
1
100
AB-241-5/16 5
⁄16 100
• Universal nylon cone nut AB-241-3/8 3
⁄8 100
• Sizes: 1⁄4", 3⁄8" & 1⁄2" AB-241-1/2 1
⁄2 100
For all 15⁄8" & 11⁄2" channels. AB-241-5/8 5
⁄8 50
May be used with ALL strut depths GoldGalv® is standard finish.
Add “EG” suffix for SilverGalv®.
CAT. NO. SIZE (IN.) FINISH
BC910 1/4 1
⁄4 –20 Galv-Krom®
BC910 3/8 3
BC910 1/2 1
C-15
Channel Fittings
B-915 Two-Hole Angle Connector B-917 Five-Hole Angle Connector
1 1⁄ 2 1 1⁄ 2
1 1⁄ 2" 3"
3
⁄4"
2 1⁄ 4 4 1⁄ 2"
9
⁄ 16"
3
1
⁄4
1 1⁄ 2" 1
⁄ 4"
3
⁄4
9
⁄ 16 3
⁄ 4"
Can also be used as side-beam connector to suspend 1⁄ 2" hanger rod.
CAT. NO. FINISH CAT. NO. FINISH

B 915 Galv-Krom® B 917 Galv-Krom®
B-915EG Electro-Galvanized B-917EG Electro-Galvanized
B-915HD Hot-Dipped Galvanized B-917HD Hot-Dipped Galvanized
⁄4" steel. 39#/C.
1
⁄4" steel. 68#/C.
1
B-916 Three-Hole Angle Connector B-918 Left-Hand Gusset Connector
3
⁄4" 11⁄2" ⁄4"
3
11⁄ 2 11⁄ 2
3
⁄4"
11⁄2"
11⁄2"
1
⁄2"
Can also be used 2 ⁄4
1
as side beam 4 1⁄ 2 41⁄2" 41⁄2"

connector to
suspend 11⁄ 2"
hanger rod. 11⁄2" 1
⁄4"
1
⁄4
1 1⁄ 2 9
⁄ 16
3
⁄4"
3
⁄4

B-916HD Hot-dipped galvanized B-918EG Electro-Galvanized
⁄4" steel. 46#/C.
1
12 Ga. and 1⁄4" steel. 102#/C.
C-16
Channel Fittings
B-919 Right-Hand Gusset Connector B-921 Two-Side 11⁄ 2" 1 ⁄ 2"

1
Corner Connector 3
⁄ 4" 9
⁄ 16"
41⁄ 2"
1 ⁄ 2"
1
3
⁄ 4"
11⁄ 2"
3
⁄ 4"
11⁄ 2"
41⁄ 2"

11⁄ 2" 3
⁄ 16"
41⁄ 2"
CAT. NO. FINISH

B 921 Galv-Krom®
⁄16" steel. 101#/C.
3
B-922 Opposite-Side 3
⁄ 4" 3" 3
⁄ 4"
Angle Connector
CAT. NO. FINISH
9
⁄ 16"
2" 9
⁄ 16"
B 919 Galv-Krom ®
4 ⁄ 2"
1
B-919EG Electro-Galvanized
12 ga. and 1⁄4" steel. 102#/C. 11⁄ 2"
3
⁄ 4"
B-920 End Connector 3

⁄ 4"
11⁄ 2" ⁄ 16"
3
11⁄ 2" 3
⁄ 4"
3
⁄ 4" 11⁄ 2" 3
⁄ 4"
11⁄ 2"
CAT. NO. FINISH

B 922 Galv-Krom®
⁄16" steel. 124#/C.
3
B-923 Three-Side Angle Connector

3
⁄4
41 ⁄ 2
9
⁄ 16 41⁄ 2
⁄ 16
3
3
⁄4 3
⁄4 11 ⁄ 2 19⁄ 16
3
⁄4 3 3
⁄4

B 920 Galv-Krom ®
B 923 Galv-Krom®
⁄16" steel. 80#/C.
3
⁄16" steel. 137#/C.
3
C-17
Channel Fittings
B-924 Post Base Connector B-925 Post Base Connector

33⁄16"
⁄4"
3
1
⁄4"
3"
13⁄4" 6" 41⁄7"
19⁄16" 3"
11⁄2" (4) 3⁄4"
Dia.
Holes
(4) 3⁄4" 41⁄4"
6" 41⁄4" Dia. 6"
Holes
1
⁄4" CAT. NO. FINISH
41⁄4"
B-925 Galv-Krom®
6"
B-925-EG SilverGalv®
CAT. NO. FINISH

B 924 Galv-Krom® B-925FL Post Base Connector
B-924-EG SilverGalv®
1
⁄ 4" steel 250#/C.
For use with 11⁄ 2" x 11⁄ 2" channels.
3
⁄4" 33⁄16"
Dia.
Holes
B-924FL Post Base Connector 3"
1 ⁄8"
5
41⁄2"
6"
3"
3"
(3) 3⁄4"
41⁄2" Dia.
6" Holes CAT. NO. FINISH
3" B-925FL Galv-Krom®
B-925FLEG SilverGalv®
CAT. NO. FINISH

B-925SQ Post Base Connector
B 924FL Galv-Krom®
B-924-FLEG SilverGalv®
B-924SQ Post Base Connector

4 Holes
⁄ 4" Dia.
3
(4) 3⁄4"
Dia. 19⁄ 16" 31 ⁄ 2 "
Holes 31⁄ 2"
6" 6"
6"
6"
41⁄ 4" 41⁄ 4"
41⁄ 4" 41⁄ 7"

B 924SQ Galv-Krom® B-925SQ Galv-Krom®
B-924SQEG SilverGalv® B-925SQEG SilverGalv®
C-18
Channel Fittings
B-926 Z Support B-929 Wide U Support
11⁄2
115⁄32
61⁄4
31⁄2 ⁄16
9
19⁄16

19⁄16
115⁄32
3
⁄16 11⁄4
11⁄2
CAT. NO. FINISH

CAT. NO. FINISH
⁄4" steel. 42#/C.
1
3
⁄16" steel. 63#/C.
For use with 11⁄2" x 11⁄2" channels.
B-927 U Support B-930 Angle Support
CAT. NO. FINISH

B 927 Galv-Krom®
3
⁄16" steel. 57#/C. CAT. NO. FINISH
For use with 11⁄2" x 11⁄2" channels. B 930 Galv-Krom®
1
⁄ 4" steel. 70#/C.
11
⁄ 16 5⁄ 16 3
⁄4
B-928 Deep 1
U Support B-932 Heavy Angle Connector
11⁄ 2
9
⁄ 16
3
⁄4
3
⁄ 16
31⁄ 16 19⁄ 16 19⁄ 16

B 928 Galv-Krom ®
B 932 Galv-Krom®
3
⁄16" steel. 77#/C. ⁄16" steel. 136#/C.
3
C-19
Channel Fittings
3
B-933 Five-Hole B-936 Angle Plate
3
⁄4 11⁄ 2
Joint Connector Connector
1
⁄4
9
⁄ 16 11⁄ 2
9
⁄ 16 11⁄ 2
3
⁄4
41 ⁄ 2
3
3
⁄4
3
11⁄ 2 11⁄ 2 3
11⁄ 2
3
⁄4 11⁄ 2
CAT. NO. FINISH

CAT. NO. FINISH
B 936 Galv-Krom®
B 933 Galv-Krom® B-936GR Green Coated
⁄4" steel. 96#/C.
1
⁄16" steel. 42#/C.
3
B-934 Outside 13⁄ 4

11⁄ 2
Corner Connector B-937 T-Plate 4
3
⁄4 11⁄ 2 11⁄ 2 3
⁄4
1
3
⁄4 Connector
13⁄ 4
11⁄ 2
4 3⁄ 4 9
⁄ 16
9
⁄ 16 11⁄ 2
3
⁄4
41⁄ 2
1
⁄4 11⁄ 2
11⁄ 2
3
⁄4
3
⁄4
11⁄ 2 3
⁄ 16
11⁄ 2

⁄4" steel. 57#/C.
1
⁄16" steel. 53#/C.
3
B-935 Three-Hole Plate Connector B-938 Open Angle 45°

Connector 3
⁄4
9
⁄ 16
11⁄ 2
9
⁄ 16
11⁄ 2
11⁄ 2 11 ⁄ 2
9
⁄ 16 11 ⁄ 2 3
41⁄ 2
3
⁄ 16 3
⁄4
1
⁄4 11⁄ 2
CAT. NO. FINISH
B 935 Galv-Krom®
CAT. NO. FINISH
B-935-GR Green Coated
B-935-EG Electro-Galvanized B 938 Galv-Krom®
⁄16" steel. 32#/C.
3 ⁄4" steel. 42#/C.
1
C-20
Channel Fittings
B-939 Closed Angle Connector B-942 Swivel Plate

3
⁄4
11⁄ 2
3
⁄4
23⁄ 8 9
⁄ 16 57⁄ 8
3
⁄4
45° 9
⁄ 16
11⁄ 2 3
⁄ 16
1
⁄4

1 ⁄21 3
⁄4 1 ⁄2
1
11⁄ 2

⁄4" steel. 50#/C.
1
⁄16" steel. 40#/C.
3
B-940 Corner Braces B-943 Brace

9
⁄16
1 ⁄21 Connectors
All sizes match hole
structure of the B-905
channel at 90°. 27
⁄32
⁄4
3
1
⁄4
11⁄2 45°
⁄32
25
27
⁄32
11⁄2 25⁄ 16 9
⁄ 16
⁄4
3 1
⁄4 19⁄ 16
13⁄ 4 11⁄ 2
DIMENSIONS (IN.) WT. IN 3
CAT. NO. A B C LBS./C
B 940 1 7 1⁄2 6 3⁄4 8 1⁄8 115
CAT. NO. FINISH
B-940-2 13 1⁄2 12 3⁄4 16 5⁄8 212
B-940-3 19 1⁄2 18 3⁄4 25 1⁄8 305 B 943 Galv-Krom®
⁄4" steel, Galv-Krom®.
1 ⁄4" steel. 66#/C.
1
B-941 Joiner for B-905 Channel B-944 Double 3

⁄4 11⁄ 2 11⁄ 2 3
⁄4
Brace Connector
11⁄ 2 11 ⁄ 2
⁄ 169
11⁄ 2 1 ⁄2 1
Hole
15⁄ 8
11⁄ 2 11⁄ 2 3
11⁄ 2 6
3
⁄4
CAT. NO. FINISH 1 ⁄2

1 3
⁄ 16
B 941 Galv-Krom ® 9
⁄ 16 1 ⁄ 2
1
CAT. NO. FINISH

Order four B-910-1⁄2 nuts and four H-113-A cap
screws separately. 3
⁄4 B 944 Galv-Krom®
12 ga. steel 80#/C. ⁄16" steel. 75#/C.
3
C-21
Channel Fittings
19⁄ 16
B-945 Rod Connector B-948 Joiner for

B-907 Channel 11 ⁄ 2
11 ⁄ 2 6
9
⁄ 16
11⁄ 2 35⁄ 8 1
⁄4
9
⁄ 16 11⁄ 2
CAT. NO. FINISH

11⁄ 2 11⁄ 2 B 948 Galv-Krom®
Order four B-910-1/2 nuts and four H-113-A cap screws separately.
CAT. NO. FINISH 12 ga. steel. 51#/C.
B 945 Galv-Krom®
⁄4" steel. 61#/C.
1 B-951 Wing Connector
B-946 Z-Support 1 1
17⁄ 16"
3
⁄4
41⁄ 2"
⁄ 16
9
3 CAT. NO. FINISH
Hole 11 ⁄ 2
B-951 Galv-Krom®
1
⁄2
3
⁄4
B-952 71⁄2"
For use with B-906
1
⁄4 Wing 13⁄8"
or B-907 channel only. Connector
31⁄4"
CAT. NO. FINISH
15⁄8"
B 946 Galv-Krom® CAT. NO. FINISH
⁄4" steel. 34#/C.
1
B-952 Galv-Krom® 21⁄8"
B-953 Wing Connector

419⁄32"
B-947 Cross-Plate 9
⁄ 16 Holes
17⁄32"
Connector
11⁄2"
CAT. NO. FINISH

3
⁄4
3
⁄4
B-953 Galv-Krom®
117⁄32" 119⁄32"
B-954 Wing Connector 419⁄32"

3
⁄4
17⁄32"
11⁄ 2 11⁄ 2 11⁄ 2
4 1⁄ 2
11⁄2"
CAT. NO. FINISH
B 947 Galv-Krom® CAT. NO. FINISH
⁄4" steel. 55#/C.

1 B-954 Galv-Krom®
117⁄32" 119⁄32"
C-22
Channel Fittings
B-957 Wing Connector B-962 Plate Connector

3"
CAT. NO. FINISH

17⁄32" B-962 Galv-Krom® 3"
11⁄2"
CAT. NO. FINISH
B 957 Galv-Krom®
B-964 Plate Connector

B-958L Wing Connector
3"
17⁄32"
41⁄2"
11⁄2"
CAT. NO. FINISH
CAT. NO. FINISH B-964 Galv-Krom®
B 958L Galv-Krom®

B-958R Wing Connector
41⁄2"
17⁄32"
41⁄2"
11⁄2"

B 958R Galv-Krom® B-965 Galv-Krom®
B-960 Plate Connector B-966 Plate Connector
6"
CAT. NO. FINISH 1 ⁄2"

1
3"
B 960 Galv-Krom ®
CAT. NO. FINISH
B-966 Galv-Krom® 11⁄2"

B-967 Plate
Connector
71⁄2"
CAT. NO. FINISH
B 961 Galv-Krom® 3"
41⁄2"
11⁄2"
CAT. NO. FINISH
B-967 Galv-Krom®
C-23
Bantam Channels
For the support of light- and medium-weight equipment

in electrical and mechanical applications.
Bantam Channels
Bantam Channels simplify the support of overhead fixtures, conduits, pipes Installed slot down the open slot accommodates and enables easy
and boxes in suspended ceiling installations where they can be supported positioning of accessory fittings or 1⁄4" hanger rod to support light-
on runs of lathers channel or directly from bar joists or ceiling beams. or medium-weight equipment.
Ribbed channels may also be mounted on concrete forms and used The use of Kindorf® Channel Bars provides a ready made system
as low-cost continuous-slot concrete inserts. of bars and accessories designed to eliminate costly and time-
consuming on-the-job improvising.
LathersChannel
Lathers Channel
Bantam Channel
Bantam Channel
Adapting conduit runs- Box mounted on-

through flush mounted- Bantam Channel to-
device boxes feed fixtures
Bantam Channel
Bantam Channel Box mounted on Bantam Channel to feed fixtures.
Conduit
Conduit
Lathers
Lathers Channel
Channel
Bantam
Bantam Channel
Channel
HangerRods
Hanger Rods
6025 Fastener
6025 Fastener
ConduitHanger
Conduit Hanger
Bantam Channel
Bantam Channel
Suspended Fixture
Typical mounting on bar joists
Suspended Fixture
.750"
.500"
.281"
Ribbed Channels (extra strength)

WT.
CAT. NO. DESCRIPTION LBS./C FT.
6029 H 16 gauge (.060") Ribbed Channel with Holes 30
.266"
.266 Dia holes
Dia holes- .177" Diaholes
.177 Dia holesfor-
3
⁄"
3"4
3
⁄"
3"8
clearance
clearancefor
1"
for-1⁄44" for
#12#12 Sheet
Sheet Metal-
4 8 6029 16 gauge (.060") Ribbed Channel 45
111"2⁄2"
1
threaded rod.
threaded rod. Screw.
Metal Screw. Channels are produced in 10-ft. lengths. Pre-galvanized steel.
.576 .388
Lightweight Channels
WT.
.281
CAT. NO. DESCRIPTION LBS./C FT.
6013 20 gauge (.034") Lightweight Channel 17
.451 .263
6014 18 gauge (.044") Lightweight Channel 16
Channels are produced in 10-ft. lengths. Pre-galvanized steel.
.281
C-24
Bantam Channels
Low-Cost Techniques for Bantam Channel.

Fast, Easy Hanging With Standard Fittings
Groove Holds Nut Squarely — T-Bar Clip Bantam Channel for
Nut Won’t Rotate. Low-Cost, Continuous-Slot
Concrete Inserts.

Cat. No. 6075
Mounts electrical fixtures to exposed
grid acoustical ceilings. Fits 15⁄16" or 1" bar face.
Cat. No. H-116-A-1/4 Load Rating: 100 lbs. Safety factor of 4. Cat. No. 6029
square nut tips in anywhere. Furnished complete with cupped washer and wing nut. Maximum recommended loads 200 lbs.
Insert Rod Full Height of Channel Fastener and Carrier, Beam Flange Clip
for Rigidity. (Complete Assembly) 6#/C
Cat. No. 6024

Cat. No. H-193-1/4 Cat. No. 6016 Secures channel to I-beams, angle iron or bar joists
hanger rod. with flanges not exceeding 1⁄4" thickness.
Channel Carrier 2#/C Hung Ceiling Carrying Channel Fixture Stud and Carrier,
(Complete Assembly) 7#/C Cat. No. 6026
Fits over ends of ribbed

6029 channels for continuous runs.
Channel
bar
Cat. No. 6015

6025
Bar fastener
Cat. No. 6017
Cat. No. 6025

Secures channel to lathers channel C-18 N.P.S.
or other ceiling-carrying channels.
C-25
Conduit, Cable and Pipe Supports
C105 and C106 Series Pipe Straps

Kindorf® Pipe Straps are designed to be twist inserted anywhere along
the slot side of the channel. Pipes can be placed as closely as pipe
couplings permit.
Single or multiple runs of pipe and cable are secured easily and
economically by Kindorf® supports. In the racking of multiple runs of pipe,
for example, C-105 Straps are quickly twist inserted into a channel slot and
the pipe is installed by the tightening of a single screw. There are no holes 5'
to drill and position adjustment is made simple by sliding the strap along
the channel slot. Runs of pipe or conduit can be spaced with complete
freedom, as close as conduit couplings permit. 36"
For single runs, the C-149 Pipe Hanger saves installation time by allowing
the conduit or pipe to be laid in place after the hanger is mounted. The Trapeze application supporting
versatile C-149 can be suspended from hanger rod or bolted directly to multiple conduit runs.
the wall, and pipe insulation, when needed, can be installed without
removing the pipe from the hanger.
These are but two examples of how Kindorf® products deliver lower installed
costs. Whether it be a problem of tight spacing, adjustment or alignment of
adequate spacing between hangers, there’s a Kindorf® support to solve it.
Kindorf® pipe and cable supports are engineered to provide safe and secure
installations. The majority of Kindorf® supports are protected by the exclusive
Galv-Krom® finish, including threaded components.
C-247 Beam clamp
There’s a wide range of Kindorf® pipe and cable supports to meet supports pipe.
almost every job condition, installed either in combination with channel Pipe supported by C-149
or individually secured to the structure surface. lay-in hanger.
Some unique features of the straps include: 11⁄4"

• Bolt head is combination slot and hexhead for flexibility
of attachment
• Square nut is captivated on the shoulder for easy
one-handed tightening
• Straps are interchangeable with 15⁄8" strut for Design Loads
broader application 11⁄2"
• Straps are shipped assembled so counting and sorting

are easier
• Pipe or conduit sizes are shown on the strap for
easy identification
All Kindorf ® Straps are pre-assembled

for easy handling and sorting. Design Load
Conduit Strap Size Chart — Old Kindorf Strut

EMT TRADE SIZE (IN.) STRAP RIGID CONDUIT SIZE (IN.) STRAP
1
⁄2 700-3/8STR 1
⁄2 702-1/2
3
⁄4 700-3/4-STR 3
⁄4 702-3/4
1 700-1 1 702-1
1 1⁄4 700-1-1/4-STR 1 1⁄4 702-1-1/4
1 1⁄2 700-1-1/2-STR 1 1⁄2 702-1-1/2
2 700-2-STR 2 702-2-STR
C-26
Angler® Pipe and Conduit Clamp

For EMT, IMC, Rigid and Standard Pipe.

Universal Series Rigid Series
SIZE STRAP DESIGN INSTALL TORQUE STD. SIZE STRAP DESIGN INSTALL TORQUE STD.
CAT. NO. (IN.) THICKNESS LOAD (LBS.) (IN. LBS.) CTN. CAT. NO. (IN.) THICKNESS LOAD (LBS.) (IN. LBS.) CTN.
Galv-Krom® Finish Galv-Krom® Finish

C 109 1/2 ⁄2
1
14 ga. 400 40 100 C 109R 1/2 ⁄2 1
14 ga. 600 40 100
C 109 3/4 ⁄4
3
14 ga. 500 40 100 C 109R 3/4 ⁄4 3
14 ga. 600 40 100
C 109 1 1 14 ga. 500 40 100 C 109R 1 1 14 ga. 600 40 100
C 109 1 1/4 1 1⁄4 14 ga. 500 40 100 C 109R 1 1/4 1 1⁄4 14 ga. 600 40 100
C 109 1 1/2 1 1⁄2 12 ga. 800 60 50 C 109R 1 1/2 1 1⁄2 12 ga. 800 60 50
C 109 2 2 12 ga. 800 60 50 C 109R 2 2 12 ga. 800 60 50
C 109 2 1/2 2 1⁄2 12 ga. 800 60 50 C 109 2 1/2 2 1⁄2 12 ga. 800 60 50
C 109 3 3 12 ga. 800 60 50 C 109 3 3 12 ga. 800 60 50
C 109 3 1/2 3 1⁄2 11 ga. 1,200 60 25 C 109 3 1/2 3 1⁄2 11 ga. 1,200 60 25
C 109 4 4 11 ga. 1,200 60 25 C 109 4 4 11 ga. 1,200 60 25
SilverGalv® Finish SilverGalv® Finish
C 109 1/2 EG ⁄2
1
14 ga. 400 40 100 C 109R 1/2 EG ⁄2 1
14 ga. 600 40 100
C 109 3/4 EG ⁄4
3
14 ga. 500 40 100 C 109R 3/4 EG ⁄4 3
14 ga. 600 40 100
C 109 1 EG 1 14 ga. 500 40 100 C 109R 1 EG 1 14 ga. 600 40 100
C 109 1 1/4 EG 1 1⁄4 14 ga. 500 40 100 C 109R 1 1/4 EG 1 1⁄4 14 ga. 600 40 100
C 109 1 1/2 EG 1 1⁄2 12 ga. 800 60 50 C 109R 1 1/2 EG 1 1⁄2 12 ga. 800 60 50
C 109 2 EG 2 12 ga. 800 60 50 C 109R 2 EG 2 12 ga. 800 60 50
C 109 2 1/2 EG 2 1⁄2 12 ga. 800 60 50 C 109 2 1/2 EG 2 1⁄2 12 ga. 800 60 50
C 109 3 EG 3 12 ga. 800 60 50 C 109 3 EG 3 12 ga. 800 60 50
C 109 3 1/2 EG 3 1⁄2 11 ga. 1,200 60 25 C 109 3 1/2 EG 3 1⁄2 11 ga. 1,200 60 25
C 109 4 EG 4 11 ga. 1,200 60 25 C 109 4 EG 4 11 ga. 1,200 60 25
Available in SilverGalv® Finish by adding “EG” suffix to catalog number. Hex head size 3⁄8" for 1⁄2" to 11⁄4" sizes, 1⁄2" for 11⁄2" to 4" sizes.
Material: Stamped Steel.
Pipe sizes 2 1⁄2" to 4" utilize the same clamps for the Rigid Series and the Universal Series.
Available in SilverGalv® Finish by adding “EG” suffix to catalog number.
C-200 Universal Pipe Straps

EMT, IMC, RIGID PIPE O.D. STRAP WT.
CAT. NO. PIPE SIZE (IN.) RANGE (IN.) THICKNESS LBS./C
C-200-1⁄2 ⁄2
1
.706–.804 14 ga. 12
C-200-3⁄4 ⁄4
3
.922–1.060 14 ga. 13
C-200-1 1 1.163–1.315 14 ga. 14
C-200-1-1⁄4 1 1⁄4 1.508–1.660 14 ga. 16
C-200-1-1⁄2 1 1⁄2 1.738–1.900 12 ga. 27
C-200-2 2 2.196–2.375 12 ga. 31
Design load equal to C-105 straps.
C-27
C-105 and C-106 Pipe Straps

Kindorf® Pipe Straps are designed to be twist inserted • Straps are interchangeable with
anywhere along the slot side of the channel. Pipes 15⁄8" strut for broader application
can be placed as closely as pipe couplings permit.
Some unique features • Straps are shipped assembled so

of the straps include: counting and sorting are easier
• Bolt head is combination slot and hex • Pipe or conduit sizes are shown
head for flexibility of attachment on the strap for easy identification
• Square nut is captivated on the shoulder
for easy one-handed tightening
Kindorf® Straps for Rigid Conduit, IMC and Pipe

STEEL STRAPS — GALV-KROM® FINISH
RIGID
CONDUIT STEEL DESIGN
1 41
OR PIPE O.D. STRAP LOAD WT.
CAT. NO. SIZE (IN.) SIZE (IN.) THICKNESS (LBS.) LBS./C
C-105-3/8 3
⁄8 0.675 14 ga. 750 12
C-105-1/2 1
⁄2 0.840 14 ga. 750 13
C-105-3/4 3
⁄4 1.050 14 ga. 750 15
C-105-1 1 1.315 14 ga. 750 17
C-105-1-1/4 11⁄4 1.660 14 ga. 800 19
C-105-1-1/2 1 1⁄2 1.900 12 ga. 800 28
C-105-2 2 2.375 12 ga. 800 31
1 21
C-105-2-1/2 21⁄2 2.875 12 ga. 1000 36
C-105-3 3 3.500 12 ga. 1650 42
C-105-3-1/2 31⁄2 4.000 11 ga. 1650 56
C-105-4 4 4.500 11 ga. 1650 64
C-105-4-1/2 41⁄2 5.000 11 ga. 1650 72
C-105-5 5 5.563 11 ga. 1650 76
C-105-6 6 6.625 11 ga. 1650 89
C-105-8 8 8.625 11 ga. 1650 114
C-105-10 10 10.750 10 ga. 1650 160
C-105-12 12 12.750 10 ga. 1650 165
Interchangeable strap
fits both 1 1⁄2" and 1 5⁄8".
All Kindorf® Straps are preassembled

for easy handling and sorting. Design Load
C-28
Kindorf® Straps for EMT Kindorf® Straps for O.D. Tubing

STEEL DESIGN STEEL DESIGN
TUBING STRAP LOAD TUBING STRAP LOAD
CAT. NO. O.D. (IN.) THICKNESS (LBS.) CAT. NO. O.D. (IN.) THICKNESS (LBS.)
Galv-Krom Finish
®
Galv-Krom® Finish
701 1/4 1
⁄4 14 ga. 750 701-4 4 11 ga. 1,650
701-3/8 3
⁄8 14 ga. 750 701-4-1/8 41⁄8 11 ga. 1,650
701-1/2-STR 1
⁄2 14 ga. 750 701-4-1/4 41⁄4 11 ga. 1,650
701-5/8 5
⁄8 14 ga. 750 701-4-3/8 43⁄8 11 ga. 1,650

701-3/4 3
⁄4 14 ga. 750 701-4-1/2 41⁄2 11 ga. 1,650
701-7/8 7
⁄8 14 ga. 750 701-4-5/8 45⁄8 11 ga. 1,650
701-1-STR 1 14 ga. 750 701-4-3/4 43⁄4 11 ga. 1,650
STEEL — GALV-KROM® FINISH
STEEL DESIGN 701-1-1/8 1 1⁄8 14 ga. 1,000 701-4-7/8 47⁄8 11 ga. 1,650
EMT O.D. STRAP LOAD WT. 701-1-1/4 1 1⁄4 14 ga. 1,000 701-5 5 11 ga. 1,650
CAT. NO. SIZE (IN.) SIZE (IN.) THICKNESS (LBS.) LBS./C 701-1-3/8 1 3⁄8 14 ga. 1,000 701-5-1/8 51⁄8 11 ga. 1,650
C-106-3/8 3
⁄8 0.577 14 ga. 750 13 701-1-1/2 1 1⁄2 14 ga. 1,000 701-5-1/4 51⁄4 11 ga. 1,650
C-106-1/2 1
⁄2 0.706 14 ga. 750 14 701-1-5/8 1 5⁄8 14 ga. 1,000 701-5-3/8 53⁄8 11 ga. 1,650
C-106-3/4 3
⁄4 0.922 14 ga. 750 13 701-1-3/4 1 3⁄4 12 ga. 1,000 701-5-1/2 51⁄2 11 ga. 1,650
C-106-1 1 1.163 14 ga. 750 16 701-1-7/8 1 7⁄8 12 ga. 1,000 701-5-5/8 55⁄8 10 ga. 1,650
C-106-1-1/4 1 1⁄4 1.510 14 ga. 750 19 701-2 2 12 ga. 1,000 701-5-3/4 53⁄4 10 ga. 1,650
C-106-1-1/2 11⁄2 1.740 12 ga. 800 20 701-2-1/8 2 1⁄8 12 ga. 1,300 701-5-7/8 57⁄8 10 ga. 1,650
C-106-2 2 2.197 12 ga. 800 22 701-2-1/4 2 1⁄4 12 ga. 1,300 701-6 6 10 ga. 1,650
701-2-3/8 2 3⁄8 12 ga. 1,300 701-6-1/8 61⁄8 10 ga. 1,650
701-2-1/2 2 1⁄2 12 ga. 1,300 701-6-1/4 61⁄4 10 ga. 1,650
701-2-5/8 2 5⁄8 12 ga. 1,300 701-6-3/8 63⁄8 10 ga. 1,650
701-2-3/4 2 3⁄4 12 ga. 1,300 701-6-1/2 61⁄2 10 ga. 1,650
701-2-7/8 2 7⁄8 12 ga. 1,300 701-6-5/8 65⁄8 10 ga. 1,650
701-3 3 12 ga. 1,300 701-6-3/4 63⁄4 10 ga. 1,650
701-3-1/8 3 1⁄8 12 ga. 1,300 701-6-7/8 67⁄8 10 ga. 1,650
701-3-1/4 3 1⁄4 12 ga. 1,300 701-8 8 10 ga. 1,650
701-3-3/8 3 3⁄8 12 ga. 1,300
701-3-1/2 3 1⁄2 12 ga. 1,300
701-3-5/8 3 5⁄8 11 ga. 1,650
701-3-3/4 3 3⁄4 11 ga. 1,650
701-3-7/8 3 7⁄8 11 ga. 1,650
C-708-U Short Strap for DIMENSIONS

Channel or Wall Mounting CAT. NO.
PIPE
SIZE (IN.) A
(IN.)
B
HOLE
SIZE (IN.)
STOCK
SIZE (IN.)
DESIGN LOAD
(LBS.)
C708U 1/2 ⁄2
1
2 7⁄8 2 9
⁄32 1
⁄8 x 1 5⁄8 650
C-708-U-3/4 ⁄4
3
3 1⁄16 2 3⁄16 9
⁄32 1
⁄8 x 1 5⁄8 650
C-708-U-1 1 3 3⁄8 2 1⁄2 9
⁄32 1
⁄8 x 1 5⁄8 650
C-708-U-1-1/4 1 1⁄4 3 11⁄16 2 3⁄16 9
⁄32 1
⁄8 x 1 5⁄8 650
C-708-U-1-1/2 1 1⁄2 3 15⁄16 3 1⁄16 9
⁄32 1
⁄8 x 1 5⁄8 650
C-708-U-2 2 5 3⁄4 4 1⁄8 7
⁄16 1
⁄4 x 1 5⁄8 650
C-708-U-2-1/2 2 1⁄2 6 3⁄16 4 9⁄16 7
⁄16 1
⁄4 x 1 5⁄8 1,000
C-708-U-3 3 6 3⁄16 5 3⁄16 7
⁄16 1
⁄4 x 1 5⁄8 1,000
B C-708-U-3-1/2 3 1⁄2 7 5⁄16 5 11⁄16 7
⁄16 1
⁄4 x 1 5⁄8 1,000
A C-708-U-4 4 7 13⁄16 6 3⁄16 7
⁄16 1
⁄4 x 1 5⁄8 1,200
C-708-U-5 5 8 7⁄8 7 1⁄4 7
⁄16 1
⁄4 x 1 5⁄8 1,200
C-708-U-6 6 9 15⁄16 8 5⁄16 7
⁄16 1
⁄4 x 1 5⁄8 1,200
C-29
EZ-Strap Framing Channel Clamp

• Fits EMT, IMC and • Installs directly over conduit
rigid conduit for easy installation Ty-Rap® Cable Clamp
• Size range 1⁄2" thru 2" • 50% reduction of When fastening wire bundles, cables or hoses to framing
installation time channels, you can cut costs considerably by using the TY-RAP®
• Can be used on 1 ⁄2" 1
Cable Clamp. It is made of smooth, weather-resistant nylon and
or 15⁄8" channel • No twisting required designed to protect cable insulation and hoses from wear or
to install
• Saves inventory dollars damage as can occur with metal clamps. The clamp may be
• Slotted hex head screw used for both indoor or outdoor applications. It installs in the
• Corrosion-resistant
Galv-Krom® finish framing channel with a simple push and twist. It requires no
screws, nuts or tools. The clamp fits all 11⁄2" and 15⁄8" channels
• One-piece construction regardless of channel depth.
means no assembly required
C-108 Universal Pipe Strap

CAT. NO. DIMENSIONS (IN.) THICKNESS O.D. WT.
& SIZE CONDUIT OR PIPE SIZE STEEL SIZE LBS./C
C-108-1⁄2 1
⁄2 EMT ⁄2 IMC
1 1
⁄2 Rigid 16 ga. 7
⁄8 8
C-108-3⁄4 3
⁄4 EMT ⁄4 IMC
3 3
⁄4 Rigid 16 ga. 1 23⁄ 32 10
C-108-1 1 EMT 1 IMC 1 Rigid 16 ga. 1 11⁄ 32 10
C-108-1-1⁄4 1 1⁄4 EMT 1 1⁄4 IMC 1 1⁄4 Rigid 14 ga. 1 11⁄ 16 15
C-108-1-1⁄2 1 1⁄2 EMT 1 1⁄2 IMC 1 1⁄2 Rigid 14 ga. 1 15⁄ 16 16
C-108-2 2 EMT 2 IMC 2 Rigid 14 ga. 2 13⁄ 32 19 • Installs with a push and twist
• Designed for indoor or outdoor use
C-144 Two-Hole Pipe Straps • Smooth design protects cable insulation
11
⁄32" • Takes range of cable diameters
D
Holds pipe tight against
mounting surface.
B
A
DIMENSIONS (IN.) WOOD SCREW THICKNESS WT. CHANNEL MAXIMUM TIE UNIT STD.
CAT. NO. A&B C D E SIZE REQ’D. STEEL LBS./C CAT. NO. SIZE WIDTH ACCOM. QUAN. CTN.
C-144-1⁄2 .840 2 3 3
⁄4 No. 12 x 1 1
⁄8 10 TC5363X 1.5 & 1.625 .301 50 250
C-144-3⁄4 1.050 2 1⁄4 3 1⁄4 3
⁄4 No. 12 x 1 1
⁄8 11 Mounting bases for heavy-duty applications are made from high-impact weather-resistant nylon.
C-144-1 1.315 2 1⁄2 3 1⁄2 3
⁄4 No. 12 x 1 1
⁄8 13
C-144-1-1⁄4 1.660 3 1⁄4 4 1⁄4 1 No. 12 x 1 1
⁄8 20
C-144-1-1⁄2 1.900 3 1⁄2 4 1⁄2 1 No. 12 x 1 1
⁄8 23
C-144-2 2.375 4 1⁄4 5 1⁄4 1 No. 16 x 11⁄2 1
⁄8 30
C-144-2-1⁄2 2.875 5 6 1 No. 16 x 11⁄2 1
⁄8 35
C-144-3 3.500 5 3⁄4 6 3⁄4 1 No. 16 x 2 1
⁄8 42
C-144-3-1⁄2 4.000 6 1⁄2 7 1⁄2 1 No. 16 x 21⁄2 3
⁄16 69
C-144-4 4.500 7 8 1 No. 16 x 3 3
⁄16 78
Standard finish Galv-Krom®.
C-30
The new specification standard

for heavy-duty industrial applications.
King Cobra® Cable and Pipe Clamp Cobra® One-Piece Cable
with GoldGalv® Finish and Pipe Clamp
• Superior design load capabilities for Takes a bite out of your installation time!
industrial applications: 350 lbs. for 1⁄2" • One-piece heavy-duty construction

to 2 1⁄2" trade sizes; 450 lbs. for ready to install right out of the box,
3" to 4" trade sizes no need to break apart and reassemble,
• Durable one-piece heavy-duty steel no screws or bolts to drop
construction — designed specifically • Installs quickly and securely
for use in industrial applications using one hand
• Embosses on shoulder and hooks • Universal bolt head accepts
increase loading capability and durability, a range of tools
preventing deformation of clamps
• Eliminates the guesswork from clamp
• Rugged stirrup provides increased strength selection — one catalog number attaches
for heavier loads, minimizing deflection equal trade sizes of EMT and rigid conduit
• Wider saddle design with anti-rotation tabs • Parallel hook design keeps conduits
distributes load evenly over a larger surface area, and cable square with strut
preventing jacket damage
• Reconfigure wiring without complete
• Increased corrosion protection* — GoldGalv® (yellow zinc disassembly. Remove cables easily
dichromate) finish stands up to harsh industrial applications without disturbing neighboring clamps
• Parallel hook design keeps conduit and cable square
with strut
• Heavy-duty 5⁄16" hex bolt
• One clamp size works on equal trade sizes for both EMT
and rigid conduit, simplifying clamp specification
* Compared to conventional electrogalvanization.
King Cobra® Cobra®

FOR EMT FOR EMT
AND RIGID STATIC LOAD AND RIGID STATIC LOAD
CONDUIT CABLE O.D. LIMIT (LB) STD. CONDUIT CABLE O.D. LIMIT (LB) STD.
CAT. NO. TRADE SIZE (IN.) RANGE (IN.) SAFETY FACTOR = 4 CTN. CAT. NO. TRADE SIZE (IN.) RANGE (IN.) SAFETY FACTOR = 4 CTN.
GoldGalv® Finish Electro-Galvanized Steel

KCPC050 ⁄2
1
0.650–0.890 350 100 CPC025 ⁄4
1
0.312–0.600 200 100
KCPC075 ⁄4
3
0.860–1.110 350 100 CPC050 ⁄2
1
0.650–0.890 200 100
KCPC100 1 1.100–1.400 350 100 CPC075 3
⁄4 0.860–1.110 200 100
KCPC125 11⁄4 1.400–1.725 350 50 CPC100 1 1.100–1.400 200 100
KCPC150 11⁄2 1.690–1.980 350 50 CPC125 11⁄4 1.400–1.725 200 50
KCPC200 2 1.980–2.576 350 50 CPC150 11⁄2 1.690–1.980 200 50
KCPC250 21⁄2 2.576–3.060 350 25 CPC200 2 1.980–2.576 200 50
KCPC300 3 3.060–3.626 450 25 CPC250 21⁄2 2.576–3.060 350 25
KCPC350 31⁄2 3.626–4.126 450 25 CPC300 3 3.060–3.626 350 25
KCPC400 4 4.126–4.626 450 25 CPC350 31⁄2 3.626–4.126 350 25
Standard Finish — GoldGalv®, unless otherwise stated. CPC400 4 4.126–4.626 350 25
Standard Finish — GoldGalv®, unless otherwise stated.
Stainless Steel: add suffix SS or 556.
C-31
C-711 Lay-in-Pipe Hanger (J-Hanger)

Saves installation time by allowing the conduit or pipe to be laid in place after the hanger is mounted. Fastening
Rest pipe in body of
of side bolt can be delayed until most convenient for job conditions. Insulation can be installed without removing
hanger. Fasten side bolt
pipe from hanger. The C-149 hanger can be suspended from hanger rod or can be bolted directly to a wall. when convenient.
When used with hanger rod, assembly requires two H-114 hex nuts.
Vertical adjustment of at least 11⁄2" after pipe is laid in place. The lower nut adjusts pipe lines to the proper pitch
and the top nut, when locked into position, prevents loosening due to vibration. The square nut on the side bolt
is kept from loosening by the arrangement of hole and up-turned lip.
PIPE A BOLT MAX. REC.

SIZE ROD SIZE DIMENSIONS (IN.) SIZE STOCK LOADS
CAT. NO. (IN.) (IN.) B C D E F G (IN.) SIZE LBS.
C-711-1/2 1
⁄2 3
⁄8 2 5⁄8 1 3⁄4 7
⁄16 1 1⁄2 1 15⁄16 3 5⁄32 1
⁄4 12 ga, x 3⁄4 400
C-711-3/4 3
⁄4 3
⁄8 2 7⁄8 1 7⁄8 7
⁄16 1 11⁄16 2 1⁄8 3 1⁄2 1
⁄4 12 ga. x 3⁄4 400
C-711-1 1 3
⁄8 2 15⁄16 1 15⁄16 7
⁄16 1 13⁄16 2 5⁄16 3 11⁄16 1
⁄4 12 ga. x 3⁄4 400
C-711-1-1/4 1 1⁄4 3
⁄8 3 1⁄4 2 7
⁄16 2 1⁄16 2 5⁄8 4 1⁄8 1
⁄4 12 ga. x 3⁄4 400
C-711-1-1/2 1 1⁄2 3
⁄8 3 9⁄16 2 3⁄16 7
⁄16 2 7⁄16 2 7⁄8 4 5⁄8 1
⁄4 12 ga. x 3⁄4 400 A
C-711-2 2 3
⁄8 3 11⁄16 2 1⁄8 7
⁄16 2 9⁄16 3 1⁄16 5 1
⁄4 12 ga. x 3⁄4 400
C-711-2-1/2 2 1⁄2 1
⁄2 7 7⁄16 2 7⁄16 9
⁄16 3 3⁄16 3 5⁄8 6 3
⁄8 12 ga. x 1 1⁄4 500
C-711-3 3 1
⁄2 4 13⁄16 2 9⁄16 9
⁄16 3 1⁄2 4 1⁄16 6 21⁄32 3
⁄8 12 ga. x 1 1⁄4 500
C-711-3-1/2 3 1⁄2 1
⁄2 5 1⁄8 2 5⁄8 9
⁄16 3 3⁄4 4 3⁄8 7 5⁄16 3
⁄8 3
⁄16 x 1 1⁄4 500
C-711-4 4 5
⁄8 6 1⁄8 3 3⁄16 9
⁄16 4 5⁄8 5 3⁄16 8 9⁄16 3
⁄8 3
⁄16 x 1 1⁄4 550 B C
D
C-711-5 5 5
⁄8 6 3⁄4 3 1⁄4 9
⁄16 5 1⁄16 5 3⁄8 9 23⁄32 3
⁄8 3
⁄16 x 1 1⁄4 550 Dia.
F E
G
C-711-6 6* 3
⁄4 7 3⁄4 3 9⁄16 9
⁄16 5 13⁄16 6 5⁄8 11 1⁄4 3
⁄8 3
⁄16 x 1 3⁄4 600
C-711-8 8* 7
⁄8 9 3⁄16 3 15⁄16 9
⁄16 6 15⁄16 8 13 11⁄16 3
⁄8 3
⁄16 x 1 3⁄4 760
* Hangers 6" and over have hole instead of slot.
C-710 Clevis Hanger

PIPE SIZE OF STEEL (IN.) DIMENSIONS (IN.) MAX. REC.
CAT. NO. SIZE (IN.) UPPER LOWER A B C D E F LOADS LBS. A
C710 1/2 1
⁄2 1
⁄8 x 1 1
⁄8 x1 3
⁄8 1 11⁄16 2 1⁄8 2 1⁄2 ⁄8
7 7
⁄16 610
C-710-3/4 3
⁄4 1
⁄8 x 1 1
⁄8 x1 3
⁄8 1 7⁄8 2 7⁄16 2 1⁄2 1 1
⁄2 610 D
C-710-1 1 1
⁄8 x 1 1
⁄8 x1 3
⁄8 2 1⁄8 2 13⁄16 2 1⁄2 1 1⁄4 5
⁄8 610
C-710-1-1/4 1 1⁄4 1
⁄8 x 1 1
⁄8 x1 3
⁄8 2 9⁄16 3 7⁄16 2 1⁄2 1 3⁄4 7
⁄8 610 F
C710-1-1/2 1 1⁄2 1
⁄8 x 1 1
⁄8 x1 3
⁄8 3 4 2 1⁄2 2 1⁄8 1 1⁄16 610 B
C-710-2 2 1
⁄8 x 1 1
⁄8 x1 3
⁄8 3 11⁄16 4 7⁄8 2 1⁄2 2 15⁄16 1 5⁄8 610 E
C
C-710-2-1/2 2 1⁄2 3
⁄8 x 1 1⁄4 3
⁄16 x 1 1⁄4 1
⁄2 4 11⁄16 6 1⁄8 3 3 13⁄16 2 1,130
C-710-3 3 3
⁄8 x 11⁄4 3
⁄16 x 11⁄4 1
⁄2 4 3⁄4 69⁄16 3 37⁄8 13⁄4 1,130 C of Pipe
C-710-3-1/2 3 1⁄2 3
⁄8 x 1 1⁄4 3
⁄16 x 1 1⁄4 1
⁄2 4 15⁄16 6 15⁄16 3 4 1⁄16 1 3⁄4 1,130
C-710-4 4 1
⁄4 x 1 1⁄4 3
⁄16 x 1 1⁄4 5
⁄8 5 9⁄16 7 13⁄16 3 1⁄2 4 1⁄2 1 15⁄16 1,130
C-710-5 5 1
⁄4 x 1 1⁄4 3
⁄16 x 1 1⁄4 5
⁄8 6 3⁄16 9 3 1⁄2 5 1⁄8 1 3⁄4 1,430
C-710-6 6 1
⁄4 x 1 1⁄2 3
⁄16 x 1 1⁄2 3
⁄4 6 3⁄16 10 1⁄8 4 5 5⁄8 1 7⁄8 1,430
C-710-7 7 1
⁄4 x 1 3⁄4 3
⁄16 x 1 3⁄4 3
⁄4 8 1⁄2 12 1⁄8 4 1⁄4 6 1⁄2 2 1⁄4 1,940
C-710-8 8 1
⁄4 x 1 3⁄4 3
⁄16 x 1 3⁄4 7
⁄8 8 5⁄16 12 5⁄8 4 1⁄4 7 2 1⁄8 1,940
C-710-10 10 3
⁄8 x 1 3⁄4 1
⁄4 x 1 3⁄4 7
⁄8 9 7⁄8 15 1⁄4 4 1⁄2 8 3⁄8 2 1⁄4 1,940
C-710-12 12 3
⁄8 x 2 1
⁄4 x 2 7
⁄8 11 13⁄16 17 9⁄16 4 3⁄4 9 3⁄4 2 5⁄8 3,600
C-710-14 14 1
⁄2 x 2 1⁄2 1
⁄4 x 2 1⁄2 1 12 7⁄16 19 7⁄16 5 1⁄4 10 13⁄16 2 15⁄16 3,800
C-710-16 16 1
⁄2 x 2 1⁄2 1
⁄4 x 2 1⁄2 1 15 23 6 12 7⁄16 2 5⁄8 4,200
C-710-18 18 1
⁄2 x 2 1⁄2 1
⁄4 x 2 1⁄2 1 1⁄8 15 1⁄4 24 1⁄4 6 1⁄2 13 15⁄16 3 3⁄4 4,600
C-710-20 20 5
⁄8 x 3 3
⁄8 x 3 1 1⁄4 16 3⁄4 26 3⁄4 7 13 15⁄16 4 4,800
C-710-24 24 5
⁄8 x 3 3
⁄8 x 3 1 1⁄4 19 31 7 1⁄2 17 1⁄2 4 1⁄4 4,800
C-710-30 30 3
⁄4 x 3 3
⁄8 x 3 1 1⁄4 24 1⁄8 39 1⁄8 8 1⁄4 21 7⁄8 5 6,000
Order by Cat. No., finish and pipe size.
C-32
C-720 Riser Clamps C-708 Messenger Cable Support

Firmly grips vertically mounted pipe or conduit Designed for use as intermediate supports for 3⁄ 8"
and distributes the load over a larger area. messenger cable. Grips cable when 5⁄ 16" screw
is tightened. Provides easy vertical adjustment.
Design load 1,000 lbs. Safety factor of 3.
A 7
⁄32
Hole

PIPE SIZE SIZE MAX. REC.
3 1
⁄8
CAT. NO. SIZE (IN.) A (IN.) STOCK (IN.) BOLT (IN.) LOAD LBS.
C720 1/2 1
⁄2 9 1⁄8 3
⁄16 x 1 3
⁄8 x 1 1⁄2 220
C-720-3/4 3
⁄4 9 1⁄4 3
⁄16 x 1 3
⁄8 x 1 1⁄2 220
C-720-1 1 9 5⁄8 3
⁄16 x 1 3
⁄8 x 1 1⁄2 220
C-720-1-1/4 1 1⁄4 9 7⁄8 1
⁄4 x 1 3
⁄8 x 1 1⁄2 250
C-720-1-1/2 1 1⁄2 10 1
⁄4 x 1 3
⁄8 x 1 1⁄2 250 11⁄4
C-720-2 2 10 1⁄2 1
⁄4 x 1 3
⁄8 x 1 1⁄2 300
5
⁄16 x 1
C-720-2-1/2 2 1⁄2 11 1⁄16 1
⁄4 x 1 3
⁄8 x 1 1⁄2 400
C-720-3 3 11 13⁄16 1
⁄4 x 1 3
⁄8 x 1 1⁄2 500
C-720-3-1/2 3 1⁄2 13 1
⁄4 x 1 1
⁄2 x 1 1⁄2 600
C-720-4 4 13 1⁄2 1
⁄4 x 1 1
⁄2 x 1 1⁄2 750 CAT. NO. DESCRIPTION
C-720-5 5 14 1
⁄4 x 1 1⁄2 1
⁄2 x 1 3⁄4 1,500
C-708 1
⁄8" Steel, 27#/C
C-720-6 6 15 3⁄16 1
⁄4 x 1 1⁄2 1
⁄2 x 1 3⁄4 1,600
C-720-8 8 19 3
⁄8 x 1 1⁄2 5
⁄8 x 2 1⁄2 2,500 Galv-Krom finish.
®
C-247, C-248 & C-249 Steel Conduit Clamps C-750 Maple Cable Clamp
A versatile clamp for attaching conduit to any type of beam, channel, Maple blocks, impregnated with paraffin.
angle or column. Designed to hold the conduit snug against the support 3
⁄ 8" bolts with special nuts facilitate
with conduit either parallel or at right angle to it. The case-hardened set installation on B-900 channel.
screw bites into the structural member for maximum security. 1⁄8" steel.
B 15⁄8
1
⁄8
B
C 5
⁄8
B a
A D
CAT. NO. DIMENSIONS (IN.) WT. IN.
& SIZE O.D. OF CABLE (IN.) A B LBS./C
CONDUIT MAXIMUM BEAM FLANGE THICKNESS (IN.)
C-750-1 0–0.99 4 3 7⁄8 90
SIZE C-247 C-248 C-249
C750 2 1.0–1.49 4 1⁄2 4 3⁄8 100
⁄2
1 5
⁄8 1 — C-750-3 1.5–1.99 5 4 7⁄8 120
⁄4
3 7
⁄16 3
⁄4 1 1⁄2 C-750-4 2–2.49 5 1⁄2 5 3⁄8 140
1 — 1
⁄2 11⁄4 C-750-5 2.5–2.99 6 5 7⁄8 160
1 1⁄4 — 1 — C750 6 3–3.49 7 6 7⁄8 200
1 1⁄2 — — 5
⁄8 C-750-7 3.5–3.99 8 7 7⁄8 240
Dim A 2 1⁄4 2 9⁄16 3 1⁄4 C-750-8 4–4.49 — — —
Dim B 1 3⁄8 1 3⁄4 2 1⁄2 C-750-9 4.5–5.00 — — —
Dim C 2 3⁄4 3 4 Size refers to overall dimensions of Maple Cable Clamp only.
Dim D 9
⁄16 9
⁄16 5
⁄8
Hole will be bored to fit O.D. of cable.
Per Carton 100 50 50
Wt. in lbs./C 33 36 59 Orders MUST specify exact O.D. of cable.
Galv-Krom® Finish. Special order.
C-33
Lightweight, non-breakable and inexpensive!

Kindorf® TPE Cable Insulator Clamps
Offer a less expensive, lighter weight and non-breakable alternative to • Tapered flange isolates and protects cable
porcelain for cable support, and they won’t rot like maple clamps. The
one-piece thermoplastic elastomer (TPE) insulator is flame-retardant, • Flame retardant
UV-resistant and chemical-resistant. A tapered flange isolates and protects
cable. Available sizes accommodate cables from 3⁄8" to 4 1⁄2" O.D. and fit all • UV resistant
Kindorf® channels as well as all 1 5⁄8" channel systems.
• Exceptional chemical resistance
• Ideal for commercial and industrial applications
• Thermoplastic elastomer (TPE) insulator
HOLE CLAMP DIM. DIM. TOTAL
CAT. NO. DIA. (IN.) SIZE (IN.) A (IN.) B&R (IN.) HEIGHT (IN.) • Electro-galvanized finish steel clamp with
Everdur nut and bolt
C755 1ATP 3
⁄8 1 ⁄8
1
1.12 .56 1.82
C-755-1B-TP 1
⁄2 1 1⁄8 1.12 .56 1.82 • Dielectric strength of 640V per mil
C-755-1C-TP 5
⁄8 1 1⁄8 1.12 .56 1.82
C-755-2 TP 3
⁄4 1 5⁄8 1.62 .81 2.34 • Sizes to hold cables 3⁄8" to 41⁄2" O.D.
C-755-2A-TP 7
⁄8 1 5⁄8 1.62 .81 2.34
C-755-2B-TP 1 1 5⁄8 1.62 .81 2.34
• Fits all channel sizes
C-755-2C-TP 1 1⁄8 1 5⁄8 1.62 .81 2.34 • UL Listed
C-755-3 TP 1 1⁄4 2 1⁄8 2.12 1.06 2.86
C-755-3A-TP 1 3⁄8 2 1⁄8 2.12 1.06 2.86
C-755-3B-TP 1 1⁄2 2 1⁄8 2.12 1.06 2.86
C-755-3C-TP 1 5⁄8 2 1⁄8 2.12 1.06 2.86
C-755-4 TP 1 3⁄4 2 5⁄8 2.62 1.31 3.5
C-755-4A-TP 1 7⁄8 2 5⁄8 2.62 1.31 3.5
C-755-4B-TP 2 2 5⁄8 2.62 1.31 3.5
C-755-4C-TP 2 1⁄8 2 5⁄8 2.62 1.31 3.5
C-755-5 TP 2 1⁄4 3 1⁄8 3.12 1.56 4.05
C-755-5A-TP 2 3⁄8 3 1⁄8 3.12 1.56 4.05
C-755-5B-TP 2 1⁄2 3 1⁄8 3.12 1.56 4.05
C-755-5C-TP 2 5⁄8 3 1⁄8 3.12 1.56 4.05
C-755-6 TP 2 3⁄4 3 5⁄8 3.62 1.81 4.75
C-755-6A-TP 2 7⁄8 3 5⁄8 3.62 1.81 4.75
C-755-6B-TP 3 3 5⁄8 3.62 1.81 4.75
C-755-6C-TP 3 1⁄8 3 5⁄8 3.62 1.81 4.75
C-755-7 TP 3 1⁄4 4 1⁄8 4.12 2.06 5.125
C-755-7A-TP 3 3⁄8 4 1⁄8 4.12 2.06 5.125
C-755-7B-TP 3 1⁄2 4 1⁄8 4.12 2.06 5.125
C-755-7C-TP 3 5⁄8 4 1⁄8 4.12 2.06 5.125
C-755-8 TP 3 3⁄4 4 5⁄8 4.62 2.31 5.54 R
C-755-8A-TP 3 7⁄8 4 5⁄8 4.62 2.31 5.54
C-755-8B-TP 4 4 5⁄8 4.62 2.31 5.54
C-755-8C-TP 4 1⁄8 4 5⁄8 4.62 2.31 5.54
C-755-8D-TP 4 1⁄4 5 5 2.5 5.92
C-755-8E-TP 4 3⁄8 5 5 2.5 5.92 B
C-755-8F-TP 4 1⁄2 5 5 2.5 5.92
.12
.12 A .12
C-34
C-755 Porcelain Insulator Clamp C-756-1 Porcelain Saddle,

Dry-process white-glaze porcelain insulators assembled in pairs to C-756-2 Porcelain Saddle
accept cables from 3⁄ 8" through 4 1⁄ 2" O.D. C-105 clamp with bronze
slotted hex head screw and nut furnished. Fits all Kindorf® channels. • White-glaze dry-process porcelain cable rack insulator
• Fits all sizes of B-900 series channel including B-906

C 21⁄8
B
A
2 1⁄ 4
DIMENSIONS (IN.) STRAP WT. IN B

CAT. NO. A B C C-105 (IN.) LBS./C
21
⁄ 32
C-755-1A 3
⁄8 2 1⁄16 1 9⁄16 1 50 21
⁄ 32
C-755-1B 1
⁄2 2 1⁄16 1 9⁄16 1 50 5
⁄ 16
A 1 7⁄ 32
C-755-1C 5
⁄8 2 1⁄16 1 9⁄16 1 50
C-755-2 3
⁄4 2 21⁄32 2 5⁄32 1 1⁄2 91
C-755-2A 7
⁄8 2 21⁄32 2 5⁄32 1 1⁄2 90
C-755-2B 1 2 21⁄32 2 5⁄32 1
⁄2 85 DIMENSIONS (IN.)
CAT. NO. A B
C-755-2C 1 1⁄8 2 21⁄32 2 5⁄32 1 1⁄2 82
C-755-3 1 1⁄4 3 1⁄8 2 5⁄8 2 114 C-756-1 3 13
⁄ 16
C-755-3A 1 3⁄8 3 1⁄8 2 3⁄8 2 110 C-756-2 4 17
⁄ 32
C-755-3B 1 1⁄2 3 1⁄8 2 5⁄8 2 105 C-756-1 is for cables up to 3" O.D. Weight 72 lbs/C.
C-755-3C 1 5⁄8 3 1⁄8 2 5⁄8 2 102 C-756-2 for cables up to 5" O.D. Weight 102 lbs/C.
C-755-4 1 3⁄4 4 1⁄4 3 3⁄4 3 220
C-755-4A 1 7⁄8 4 1⁄4 3 3⁄4 3 214
C-755-4B 2 4 1⁄4 3 3⁄4 3 205
C-755-4C 2 1⁄8 4 1⁄4 3 3⁄4 3 200
C-755-5 2 1⁄4 4 3⁄4 4 1⁄4 3 1⁄2 260
C-755-5A 2 3⁄8 4 3⁄4 4 1⁄4 3 1⁄2 250
C-755-5B 2 1⁄2 4 3⁄4 4 1⁄4 3 1⁄2 243
C-755-5C 2 5⁄8 4 3⁄4 4 1⁄4 3 1⁄2 240
C-755-6 2 3⁄4 5 1⁄4 4 3⁄4 4 250
C-755-6A 2 7⁄8 5 1⁄4 4 3⁄4 4 240
C-755-6B 3 5 1⁄4 4 3⁄4 4 230
C-755-6C 3 1⁄8 5 1⁄4 4 3⁄4 4 220
C-755-7 3 1⁄4 6 5⁄16 5 13⁄16 5 340
C-755-7A 3 3⁄8 6 5⁄16 5 13⁄16 5 330
C-755-7B 3 1⁄2 6 5⁄16 5 13⁄16 5 318
C-755-7C 3 5⁄8 6 5⁄16 5 13⁄16 5 387
C-755-8 3 3⁄4 7 3⁄8 6 7⁄8 6 565
C-755-8A 3 7⁄8 7 3⁄8 6 7⁄8 6 550
C-755-8B 4 7 3⁄8 6 7⁄8 6 535
C-755-8C 4 1⁄8 7 3⁄8 6 7⁄8 6 520
C-755-8D 4 1⁄4 7 3⁄8 6 7⁄8 6 490
C-755-8E 4 3⁄8 7 3⁄8 6 7⁄8 6 475
C-755-8F 4 1⁄2 7 3⁄8 6 7⁄8 6 460
* Also available in thermoplastic, order as C775-TP.
C-35
Concrete Inserts
Buildings designed with concrete inserts as an integral part of the ceiling

or wall construction realize many economies, both in initial construction
and when updating of the mechanical and electrical system is required.
The initial economies of construction stem from the ease with which
pipe, air conditioning, lighting and other fixtures can be attached
to ceilings or walls.
Inserted by casting into the structure, Kindorf® continuous-slot channels
will accept all the assembly parts and fittings of the Kindorf® system. This
provides virtually limitless structural arrangements — present and future.
Hanger attachments are made by the standard Kindorf® procedure of simply
inserting a standard channel nut which can be pre-started on the hanger D-990 concrete insert supports
Pipe section hangs from
rod or bolt. Placement or adjustment of attachments can be made in infinite D-990 concrete insert. conduit installation.
increments at any time along the length of the concrete insert. Future
flexibility means economies in terms of future changes in equipment
or its placement.
Initial Installation of Continuous-Slot Channel Inserts Offers:

• An immediate savings in time and labor by eliminating
D-990 D-996
the need for precise calculation and measurement,
both in layout planning and actual installation
of attachment devices TYPE LOAD RATING
CAT. NO. ANCHOR CROSS-SECTION LBS. PER FT.*
• Additional savings in time and labor because changes
or additions can be made readily to the existing channel D-990 Punched 1 1⁄2 x 1 1⁄2 x 12 ga. 2,000
at any time; the need for costly drilling in concrete D-996 Punched 1 1⁄2 x 3⁄4 x 14 ga. 1,500
and other costly procedures can be eliminated * Safety factor of 3. Based on uniformly distributed load.
* Standard lengths 10 and 20 feet.
Companion to the channel inserts is the spot-type insert for use where * Special lengths available on request.
a single hanger is required at a specific location.
D-255 Concrete Inserts D-256-2 and D-256-5 Concrete Insert

An insert with a knockout saves covering This unique product reduces the “spot” concrete insert to its simplest
the slot or covering the opening. Load rating possible components with all the adjustability of the most expensive.
at 1,300 lbs. with a safety factor of three. Its features include: two sizes — 2" and 5" adjustability, takes standard
Accommodates hanger rod sizes from 1⁄ 4" insert nuts, uses hanger rod sizes 1⁄ 4" through 5⁄ 8" and has a load rating
through 7⁄ 8" by means of a B-914 insert nut. up to 1,000 lbs. and a safety factor of 3 (hanger rod permitting).
1
⁄ 8" steel. 52 lbs./C.
135⁄64
119⁄32
T D-256-2
1
⁄8 15⁄8 3 3⁄4 13⁄8 135⁄64
2
21⁄4
3 11⁄32 N D-256-5
CAT. NO. DESCRIPTION CAT. NO. N (IN.) T (IN.) WT. IN LBS./C

D-255 For 1⁄4" through 7⁄8" Hanger Rod — 1⁄4"–1⁄2" Pipe D-256-2 2 3 34
Standard finish: Galv-Krom®. D-256-5 5 6 76
Standard finish: Galv-Krom®.
C-36
Concrete Inserts
D-990 Continuous-Slot Concrete Insert D-996 Continuous-Slot Concrete Insert

Insert is made of B-900 channel (12-ga.) with anchors punched Insert is made of B-900 channel (14-ga.) with anchors punched
out of insert on 6" centers. Polystyrene filled. out of insert on 6" centers. Polystyrene filled.
3 3

3 6 3 6
1 11⁄32 1 11⁄32
1 1⁄2 3
⁄4
CAT. NO. DESCRIPTION CAT. NO. DESCRIPTION

D-990 Continuous Slot and Concrete Insert D-996 Continuous Slot and Concrete Insert
Use B-910 or B-914 steel nuts for assembly. Load rating 2,000 lbs. per foot with Use B-910 or B-914 steel nuts for assembly. Load rating 1,500 lbs. per foot with
a safety factor of three. Available in 10- and 20-foot lengths. a safety factor of three. Available in 10- and 20-foot lengths.
Galv-Krom® finish. Galv-Krom® finish.
D-982 Anchor End Cap D-988 Anchor End Cap

For capping the ends of D-990 continuous-slot concrete inserts. For capping the ends of D-996 continuous-slot concrete inserts.
It may be used on the job to make up inserts of less than 1-foot May be used on the job to make up inserts of less than 1-foot
lengths of B-900 channel. lengths of B-906 channel.
2 ⁄6
5
⁄2
1
2 ⁄6
5
⁄2
1
1
⁄8 1
⁄8
2 1⁄8 2 1⁄8
1 7⁄16 1 7⁄16
1 5⁄16 1 5⁄16
2 2
1 5⁄16 1 5⁄16

D-982 Anchor End Cap D-988 Anchor End Cap
Load rating of such an insert less than 1-foot long is 1,000 lbs. Load rating of each insert less than 1-foot long is 600 lbs.
with a safety factor of three. 1⁄8" steel. 19 lbs./C. with a safety factor of three. 1⁄8" steel. 13 lbs./C.
C-37
Beam Clamps and Hanger Rod Supports
Attach to I-Beam by Hand,

then Lock and Load in One Step!
Heavy-Duty Beam Clamp

You can’t get much easier than the new Kindorf® Heavy-Duty Beam Clamp.
Simply clamp it to the I-beam flange by hand, and it will remain firmly fixed
while you install the threaded rod. When tightened, the threaded rod locks
the tongue of the clamp against the I-beam for a fast installation and a
superior hold.
New Way vs. Old Way
Standard Heavy-Duty
Beam Clamp
• The clamp must
be held in place
while tightening
the set screw
• The set screw
is difficult to
access within
the I-beam web
Kindorf® Heavy-Duty Beam Clamp

• Tooless attachment to the I-beam
• Thread rod secures the clamp,
eliminating an entire step in process Kindorf® Heavy-Duty Beam Clamps
can also be used for electrical
grounding connections.
CAT. NO. DESCRIPTION LOAD RATING (LBS.) ROD SIZE STD. CTN.
FBC1 Heavy-Duty Beam Clamp, 600 lbs. 600 3
⁄8–16 24
FBC2 Heavy-Duty Beam Clamp, 800 lbs. 800 3
⁄8–16 24
FBC3 Heavy-Duty Beam Clamp, 1,000 lbs. 1,000 3
⁄8–16 24
FBC4 Heavy-Duty Beam Clamp, 1,500 lbs. 1,500 1
⁄2–13 24
C-38
From the Simple Job to the Complex Job with Special Needs,
the Kindorf® Line of Beam Clamps Can Fit the Bill.
Kindorf® devices for hanging the load can deliver lower installation costs. Hanger rod and conduit pipe
supports are attached to ceilings or to other structural members such as beams, columns or purlins,
without drilling, welding or fastening by means of power-actuated tools. A full selection of beam clamps

and hanger rod supports are offered to meet a wide variety of needs.
The flexibility of the Kindorf® Series of clamps affords a range of applications, from simple attachment
of channel to the suspending of supports from sloping, as well as horizontal, beams.
Where high vibrations are expected, additional support can be attained by gripping the beam on both sides.
500 Series Beam Clamp H-550 Swivel Beam Clamp E-231 Beam Clamp
supports pipe with C-710 clevis hanger. supports pipe with C-711 hanger. supports channel raceway
with G-1012 lay-in-hanger.
C-39
E-761 Channel to Beam Clamp

3 1⁄2
3 1⁄2
1 11⁄16
⁄4
1
1 11⁄16
DESIGN LOAD CHANNEL WT.

CAT. NO. LBS./EA. SERIES LBS./C
E-761 800 B-900, B-905, B-995 108
⁄2" x 1 1⁄2" set screw included.
1
Galv-Krom® finish.
11⁄8
5
⁄8
• Secures all sizes of Kindorf® channel to beams where flange edge
does not exceed .8" thickness
3
⁄4
9
⁄16
DESIGN WT.
3
⁄4
CAT. NO. LOAD (LBS.) LBS./C
E-763 500 25 5
⁄8
Load rating each clamp 800 lbs. with a safety factor of 3 1⁄4" steel.
Assembly requires one H-113-E bolt and one B-910-1⁄2 steel nut per clamp —
order separately.
1
⁄2
Galv-Krom® finish.
1
⁄4
E-767 Channel Support 3

⁄ 8 Set screw
• Supports any size Kindorf® channel. Clamps to I-beam where flange
edge does not exceed .8" thickness
1 1⁄4 1
LOAD WT. 1 1⁄4 1 1⁄4

1
⁄4
CAT. NO. RATING (LBS.) LBS./C
E-767 800 44
Load rating is 800 lbs. with a safety factor of 3 1⁄4" steel.
Galv-Krom® finish.
C-40
G-962 and G-962-D

Channel Hangers
• G-962 fits around 11⁄2" or 17⁄8" deep channel,
G-962-D series hangers for 3" deep channel
A 11⁄4
WT. DIM. A

CAT. NO. LBS./C HANGER SIZE (IN.) (IN.)
G-962-D-1 47 1
⁄4 and 3⁄8 rod 13
⁄32
16 Ga
G-962-D-2 47 1
⁄2 rod and 1⁄4 pipe ⁄16
9
C G-962-D-3 47 3
⁄8 pipe and 5⁄8 rod 11
⁄16
B
G-962-D-4** 47 1
⁄2 pipe 7
⁄8
5
⁄16 ** Load rating of 700 lbs. with a safety factor of three.
“B” dimension for G-962: 2 1⁄2"; for G-962-D: 4". UL Listed for raceway. “C” dimension
for G-962, 1 37⁄ 64", for G-962-D, 3 7⁄ 64".
11⁄2
Galv-Krom® finish.
E-160 Adjustable
Beam Clamp (1⁄2" Rod)
• Clamps to I-beams where edge of beam flange does not
exceed .8" thickness. Hook rod is furnished in three
lengths to fit beam flanges up to 6, 9 or 12" widths
8, 11, or 14
CAT. NO. FOR BEAM FLANGE WT.

⁄2
1
FOR 1⁄2" HANGER RODS WIDTH (IN.) LBS./C
3
Min. E-160-1/2-6 2 1⁄2 to 6 115
3 5⁄ 8 E-160-1/2-9 5 1⁄2 to 9 125
2 1⁄ 8 Max.
E-160-1/2-12 8 1⁄2 to 12 154
Load rating 800 lbs. with a safety factor of three.
⁄16 x 1 1⁄2
3 Assembly requires hanger rod of the proper length and size plus two H-114-D nuts.
⁄16" steel, 1⁄2" hook rod.
3
Galv-Krom® finish.
C-41
U577 Adjustable Swinging Hanger

Flange (3⁄8" or 1⁄2" Rod)
• Flange has 13⁄32" holes for connection to ceiling
CAT. NO. WT. LBS./C

U577 100 5
Assembly requires 3⁄8" or 1⁄2" hanger rod of proper length plus two H-114-C or H-114-D nuts.
⁄16" steel.
3
Flange has 13⁄32" diameter holes for connection to ceiling. ⁄8

7
3
⁄16 x 2
Galv-Krom finish.
®
2 3⁄4
⁄16 x 1 1⁄4
3 ⁄16
15
⁄32
17
E-177 Adjustable
Channel Clamp (1⁄2" Rod)
• Adjustable to fit all structural channels up to a maximum
flange width of 3 1⁄4", and all structural angles with leg
up to 3" long and not more than 3⁄8" thick
11⁄2
CAT. NO. WT. LBS./C

E-177 183 3
⁄8
2 3
⁄8
Load rating is 800 lbs. with a safety factor of three.
Assembly requires ⁄2" hanger rod of the proper length plus two H-114-D nuts.
1
⁄8" steel.
3
Galv-Krom® finish.
6 3⁄8
C-42
E-231 Structural Steel Clamp

B ( 3⁄8" or 1⁄2" Rod)
• Clamps to I-beams, channels, angles and column. Two sizes are
available, one for 3⁄8" and the other for 1⁄2" hanger rod. Each takes
flanges up to .8"
A

DIMENSIONS (IN.) WT.
E-231-3/8* 2 1⁄2 1 ⁄8
7
31
E-231-1/2** 3 1 9⁄ 32 ⁄16
15
53
Assembly requires two H-116-C ( 3⁄8") or two H-116-D ( 1⁄ 2") square nuts
to attach hanger rod. 1⁄8" steel.
* Load rating of 500 lbs. with a safety factor of three.
** Load rating of 800 lbs. with a safety factor of three.
Galv-Krom® finish.
E-232 Clamp with Swing Connector

( 3⁄ 8" or 1⁄ 2" Rod)
B
C
DIAMETER DIMENSIONS (IN.) WT.
CAT. NO. FOR ROD (IN.) A B C LBS./C
E-232-3/8* 3
⁄8 ⁄ 16
9 7
⁄ 16 1 48
E-232-1/2** 1
⁄2 7
⁄8 29
⁄ 64 1 5⁄ 8 76
E-231 clamp with swing connector ** Load rating of 550 lbs. with a safety factor of three.
affords a convenient method of
Galv-Krom® finish.
attaching to angled beams.
E-233 Anchor Clip

• Anchor clips should be used when clamps are subject to excessive
vibration. To obtain the correct size clips add 1" to the flange width.
If length required is not standard, order next largest standard length
For use with E-231 and E-232 clamps when

hanger rod is not in straight through position. MAX. BEAM
ROD WIDTH (IN.) FOR USE WT.
CAT. NO. SIZE (IN.) “A” WITH LBS./C
E-233-3/8-6 3
⁄8 6 E-231-3/8 or 20
I A
E-233-3/8-10 3
⁄8 10 E-232-3/8 33
E-233-1/2-6 1
⁄2 6 E-231-1/2 or 26
E-233-1/2-10 1
⁄2 10 E-232-1/2 37
Galv-Krom® finish.
C-43
U-568 Beam Clamps
A
BEAM FLANGE DIMENSION A STD.
CAT. NO. WIDTH (IN.) (IN.) CTN.

U-568-6 6 9 25
U-568-8 12 15 25
16 ga. material.
Hardened points bite into beam flange. Fits all I-beams where
edge of beam flange does not exceed .8 inch thickness.
FOR STRUCTOR DIMENSION A WT.

CAT. NO. CHANNEL (IN.) LBS./C
E-760-2* B-900, B-905, B-906, B-907 3 1⁄4 76 1 1⁄ 2 ⁄8
7
3
E-760-2SS Stainless Steel
E-760-3 B-901, B-900-2A, B-902, B-903 4 3⁄4 88
* Load rating of 2,200 lbs. with a safety factor of three.
⁄4" steel, 3⁄8 inch U-bolt.
1
⁄4
1
Standard finish: Galv-Krom®. A

3
⁄8
Set screw C included

E-235 Heavy-Duty Beam Clamp
DESIGN 1 21⁄32" B
DIMENSIONS (IN.) WT. LOAD
CAT. NO. A B C LBS./C LBS.
E-235-3/8-HD 3
⁄8 1
⁄8 3
⁄ 8 x 2 3⁄ 4 109 1,300
E-235-1/2-HD 1
⁄2 1
⁄4 1
⁄ 2 x 2 3⁄ 4 201 3,150 A
Finish: Hot-dipped galvanized. Tapped Hole Size
C-44
Set Screw
C Included U-564 Heavy-Duty Beam Clamp
1 21⁄32"
B
DIMENSIONS (IN.) DESIGN STD.
CAT. NO. A B C LOAD LBS. CTN.
Tapped A U-564-3/8 3
⁄8 ⁄4
1 3
⁄ 8 x 2 3⁄ 4 1,300 25
Hole Size U-564-1/2 1
⁄2 ⁄4
1 1
⁄ 2 x 2 3⁄4 3,150 15

M-775L Clamp with Lock Nut
ROD
B C SIZE DESIGN STD.
CAT. NO. A (IN.) B (IN.) C (IN.) LOAD LBS. CTN.
M-775L-1/2 1
⁄2 3
⁄4 2 440 50
M-775L-5/8 5
⁄8 3
⁄4 2 440 50
M-775L-3/4 3
⁄4 3
⁄4 2 500 50
A
M-775L Standard Finishes - GoldGalv® brand or Black (B) Malleable Iron.
EG=Electro-Galv
B=Black
U-579 Beam Clamp for Hanging Rod
STD.
CAT. NO. A (IN.) CTN.
U579-3/8 3 1⁄ 2 25
A U-579-1/2 4 1⁄4 25
Nuts and wood screws not included.
Mounting holes 13⁄ 32".
U-579
Ceiling Flange Finishes - GoldGalv® brand Malleable Iron.
540 Beam Clamp for Hanging Rod

A
2"
DIMENSIONS (IN.) STD.
C CAT. NO. A B C D CTN.
540 3/8 ⁄8
1
1 7⁄ 8 ⁄4
1
⁄8
7
25
540-5/8 ⁄ 16
11
2 1⁄ 2 ⁄8
3
2 25
B D
Finishes – GoldGalv® brand or Black (B).
540
Side Beam Hanger Clip
C-45
S5413/8 Swing Connector ( 3⁄ 8" Rod) ⁄8

1 3
⁄4
Used to secure a ⁄ 8" hanger rod to the side or bottom of beam or ceiling.
3
⁄ 32 Hole
13
WT. 1 1⁄ 8
CAT. NO. LBS./C
S5413⁄8 28
Assembly requires two ( 3⁄ 8") square nuts. Also screw or bolt for fastening to beam or ceiling.
1 1⁄ 8
⁄8" steel.
1 13
⁄ 16
⁄ 32 Hole
13
Load rating of 700 lbs. with a safety factor of three.

Galv-Krom® finish.
U501 Channel to Beam Clamp

Hardened points bite into beam flange. Fits all I-beams where edge
of beam flange does not exceed .8" thickness.
1 1⁄2 ⁄8
7
FOR STRUCTOR DIMENSION A WT. 3
CAT. NO. CHANNEL (IN.) LBS./C
U501 B-900, B-905, 3 1⁄4 76
B-906, B-907 1
⁄4
U501SS Stainless Steel 3 1⁄4 76
U502 B-901, B-900-2A, 4 3⁄4 88 ⁄8
3 A
B-902, B-903
U502SS Stainless Steel 4 ⁄4
3
88
* Load rating of 2,200 lbs. with a safety factor of three.
1
⁄ 4" steel, 3⁄ 8-inch U-bolt.
A597 Channel to Beam Clamp
3 1⁄ 2
3 1⁄2
DESIGN LOAD CHANNEL WT. 1 11⁄ 16
CAT. NO. LBS./EA. SERIES LBS./C
A597 800 B-900, B-905, B-995 108
1
⁄ 2" x 1 1⁄ 2" set screw included. 1
⁄4
1 11⁄ 16
Galv-Krom® finish.
C-46
512-U Channel to Beam Clamp

Secures all sizes of Kindorf® channel to beams where flange
1 1⁄ 8
edge does not exceed .8" thickness.
5
⁄8
3
⁄4
DESIGN WT.
9
⁄ 16 CAT. NO. LOAD (LBS.) LBS./C
3
⁄4
512-U 500 25
5
⁄8 Load rating each clamp 800 lbs. with a safety factor of 3 1⁄4" steel.

Assembly requires one H-113-E bolt and one B-910-1⁄2 steel nut per clamp —
⁄2
1 order separately.
⁄4
1
Galv-Krom® finish.
E-764 Channel Clip

Complete with set screw for clipping a length of channel slot-side
down and across the runner bars of a dropped ceiling installation.
WT.
CAT. NO. LBS./C
E-764 4
At least two required per each such application.
Galv-Krom® finish.
E-765 Center Beam Clamp

Clamps 11⁄ 2" x 11⁄ 2" Kindorf® channel to beams where beam flange
does not exceed 3⁄ 4" thickness and 4" to 63⁄ 4" wide.
.08
11⁄2
LOAD WT.
6 1⁄4 ⁄16
3
CAT. NO. RATING (LBS.) LBS./C
⁄16
9
E-765 800 112

11⁄ 8 Load rating is 800 lbs. with a safety factor of 3.
Furnished assembled.
1" x .5" ⁄8" steel clamps, 3⁄16" steel strap.
1
Galv-Krom® finish.
C-47
U514 Channel Support E-781 Single-Beam Clamp

Supports any size Kindorf® channel. Clamps to I-beam For use in attaching channel on top of beam flange with slot side down.
where flange edge does not exceed .8" thickness. Members are shipped assembled for easy installation.
3
⁄ 8 set screw
⁄ 16
3
3 2 1 1⁄2
2 1⁄2
1 1⁄4 1 7°
7
⁄ 16 x 9⁄ 16 Slot total (3)
1 1⁄16
⁄4
1
1 1⁄4 1 1⁄ 4
8
LOAD WT. WT.

CAT. NO. RATING (LBS.) LBS./C CAT. NO. LBS./C
U514 800 44 E-781 133
Load rating is 800 lbs. with a safety factor of 3 1⁄4" steel. Galv-Krom® finish.
Galv-Krom® finish .
E-768 Column Mount Support E-782 Double-Beam Clamp

For use with 11⁄ 2" x 11⁄ 2" channel. Provides a rigid For use in attaching channel on both sides of a beam flange with slot side
support between ‘H’ beam flanges for mounting down. Members are shipped assembled for easy installation.
pipe, conduit, outlet boxes and panel boards.
3 2
3 1⁄2
11⁄4
1 1⁄ 16
7
⁄ 16 x 9⁄ 16
Slot Total (3)
⁄4
1
⁄4
1
11⁄4
⁄ 16
3
2 1⁄2 1 1⁄2
Use 11⁄ 2" x 11⁄ 2" size
5
⁄16 x 1 1⁄4 bolts 1 ⁄2
1
Kindorf ® Channel.
7°
LOAD WT. WT.

CAT. NO. RATING (LBS.) LBS./C CAT. NO. LBS./C
E-768 800 50 E-782 235
Two E-768’s required for installation. Galv-Krom® finish.
Use C-105, C-106 or C-107 straps for mounting 1⁄2" to 8" pipe on channel section.
Load rating of 800# — safety factor of three.
Galv-Krom® finish.
C-48
U-504 Single Beam Clamp U-505 Double Beam Clamp

For use in attaching channel on top of beam flange with slot side down. For use in attaching channel on both sides of a beam flange with
Members are shipped assembled for easy installation. slot side down. Members are shipped assembled for easy installation.

7
3 2
⁄4
1
1 1⁄16 ⁄ 16 x 9⁄16 Slot Total (3)

7
⁄ 16
3
⁄4
1
3 2
2 1⁄2 1 ⁄2
1
⁄ 16
3
2 1⁄2 1 1⁄2
1 1⁄ 16 ⁄ 16 x ⁄16 Slot
7 9
7°
Total (3)
7°
WT. WT.
CAT. NO. LBS./C CAT. NO. LBS./C
U504 133 U505 235
C-49
Support Brackets
Kindorf® wall brackets provide a ready-made shelving

arrangement that can be attached quickly to the supporting channels.
Utilizing the built-in advantages of the Kindorf® Channel, the support
bracket members allow a great deal of flexibility in meeting the structural
framing needs.
Axle supports and a variety of wall brackets all adapt to the standard
Kindorf® channel and allow additional flexibility in the support of cables,
conduit, pipe and other equipment.
The application of axle supports and bracket members can be made
on either the continuous slot of the channel or the pre-punched hole
side. Utilizing the 11⁄2" hole spacing, greater adaptability is attained
with a minimum of fittings.
F-721 Wall bracket hangs Conduit installations supported above
and supports pipe runs. and below by F-721 wall bracket.
F-715 Wall Bracket
B C
Mounts on Kindorf® channel or directly to wall. F-715 bracket supports
11⁄ 2" or 15⁄ 8" channels. Brackets allow for a variety of support channel
lengths. The continuous tray on brackets prevent lateral movement
⁄16 Dia.
9
of supported channels. Support channels can be fastened from top,
Holes bottom or both.
A
CAT. NO. A B C LBS./C.
F-715 5 27⁄ 32 4 5⁄ 8 1 1⁄ 2 163
Galv-Krom finish.
®
F-716-3 Wall Bracket

B C Mounts on Kindorf® channel or directly to wall. F-716-3 bracket supports
3" deep or back-to-back channels. Brackets allow for a variety of support
9
⁄16 Dia. channel lengths. The continuous tray on brackets prevent lateral movement
Holes of supported channels. Support channels can be fastened from top, bottom
or both.
A A
CAT. NO. A B C LBS./C.
F-716-3 7 11 ⁄ 32 4 5⁄ 8 1 1⁄ 2 179
Galv-Krom finish.
®
F-720 Wall Bracket

Mounts on Kindorf® channel, concrete inserts or directly to wall.
A Continuous-slot accepts C-105, C-106 and C-107 series pipe straps.
Bracket is 12-gauge steel, 11⁄2" x 11⁄2" channel welded to a 1⁄4" back plate.
May be attached to either the continuous slot side or pre-punched holes
in back or side of Kindorf® channel.
41⁄2
11⁄2
3 DIM. A END LOAD WT.
CAT. NO. (IN.) RATING LBS.* LBS./C
11⁄2 3
⁄4
F720 6** 6 600 132
9
⁄16 Hole
F-720-9** 9 450 155
11⁄2
F-720-12** 12 300 200
⁄4
1
F-720-18 18 200 275
F-720-24** 24 150 350
* Safety factor of 3.
** This product available in green & hot-dipped galvanized.
C-50
Support Brackets
F-721 Wall Bracket

Double channel to provide continuous slot for both top and bottom mounting.
12-ga. steel, 1⁄4-inch back plate. May be attached to either the continuous
slot side or pre-punched holes in back or side of Kindorf® channel. A
4 1⁄2"
DIM. A END LOAD WT. ⁄16"
9
CAT. NO. (IN.) RATING LBS.* LBS./C Holes 3"

6"
F721 18 18 300 568
F-721-24 24 225 736
F-721-30 30 180 904 ⁄ 4"
1

F-721-36 36 150 1072
1 1⁄2"
* Safety factor of 3.
F-735 and F-736 Axle Supports

For use on storage racks constructed on Kindorf® channel. Supports reels 3
⁄4
of electrical cables, wire rope, chain and other materials. Left-hand axle 9
⁄16
support illustrated. F-736 identical except right hand. May be attached
to either the continuous slot side or pre-punched holes in back or side 113⁄16
of Kindorf® channel. 1
⁄4 41⁄2
3
WT. 6
CAT NO. DESCRIPTION LBS./C
1
⁄4
F-735 Left Hand 165

9
⁄16 2 3⁄4
F-736 Right Hand 165
3
⁄4
Assembly requires two B-910-1/2 steel nuts and two H-113-B bolts.
Accepts up to 1 ⁄4" steel bar or pipe for axle.
1
1 ⁄2
1
Galv-Krom® finish. ⁄4
1
F-737 Double Axle Support 3

⁄4
Typical Kindorf® Space-Saver reel rack. Kindorf® reel racks are easy to build, 11⁄2
exceptionally strong and economical. Racks adjust easily to accommodate 9
⁄16
a variety of reel sizes. No special tools needed. 3
⁄4
113⁄16
WT. ⁄4
1
3
1
⁄4 9
CAT. NO. LBS./C
F-737 335 2 3⁄4 3
⁄4
Assembly requires four B-910-1⁄2 steel nuts and four H-113-B bolts.
1 ⁄2 1
To be used with F-735 and F-736. 1⁄4" steel. 3

⁄4
Galv-Krom ® finish. To be used as center support
for tandem reel assembly. 3 1
⁄4
F-739 Telephone Cable Hook 11⁄2

Cantileve-type cable hooks fit into ‘T’ slot on B-904 channel for rigid,
non-slip support. Fast mounting, no hardware to tighten.
DIMENSION A WT. A
CAT. NO. (IN.) LBS./C
F-739-4-1/2 4 1⁄2 81
F-739-7-1/2 7 1⁄2 122
F-739-10-1/2 10 1⁄2 162
F-739-13-1/2 13 1⁄2 198
F-739-18 18 278 11⁄2
Has 9⁄16" diameter holes on 1 1⁄ 2" centers to allow for easy tie banding of cables.
Galv-Krom ® 12-ga. steel.
C-51
Surface Raceway and Lighting Support Systems
For Mounting or Suspending High-Intensity G-969A or G-969AP Closure Strip
Lighting Fixtures in High-Bay Installations. G-975
Surface Raceway and Lighting

Support Systems G-972-1⁄2

Nipple
The Kindorf® Lighting Support System consists of high-quality construction materials
that afford definite installation advantages to those most concerned with lighting
G-972-HB-1⁄2 & 3⁄4
installations. When used as a surface metal raceway, it is UL Listed and complies Fixture Hanger
with National Electrical Code® Article 352. Adapter
To the Owner
Fixture Hanger
A flexible installation requiring fewer attachments to the building structure with built-in
provisions for easy maintenance and future modifications when lighting fixtures must be
added, deleted or relocated. Kindorf® channel and fittings form a strong, economical
and attractive support and wiring system for fixtures and other equipment.
To the Architect and Engineer Fixture Box

and Fixture
A system of construction least demanding on general design conditions and readily
adaptable to all spacing of pillars, purlins and other structural components. Supply will
not delay a job because Kindorf® channel is stocked at many locations throughout the
country. The Kindorf® System saves planning time because it is designed for fast and
easy installation by the contractor with little or no detailing.
To the Contractor
The Kindorf® System consists of time-saving materials that will simultaneously provide
for the electrical feed and the mechanical support of lighting and other equipment.
Kindorf® affords a means of making fewer attachments to the structure at wider
spacing. It insures true and rigid alignment and lends itself to systematic preassembly
methods which economize on labor. No special tools for installation and no painting
is required. Kindorf® speeds all jobs because a complete line of fittings assures
easy solution of many installation problems as they arise in the field.
Other Mechanical Details. G-969A

G-1012
G-1038
G-1020
G-962
B-900
G-969A
G-1032 G-1012
G-967 G-975
Channel raceway system supports and feeds

fluorescent lighting fixtures.
C-52
Surface Raceway Channel Systems Channel Support Lighting Systems

• Knock-out type by means • Plug-in type by means • Shoulder-bolt type by means • Spring-nut type by means
of 1⁄2" channel knockouts of sliding fixture hanger of special shoulder bolt 13⁄32" of spring-nut and bolt
on 6" centers x 3" slots on 4" centers combination
1 1⁄2 x 1 1⁄2 x 14 ga. 1 1⁄2 x 1 1⁄2 x 14 ga.
1 1⁄2 x 3⁄4 x 14 ga.

G-975-M B-900-M 1 1⁄2 x 1 1⁄2 x 12 ga.

B-906
G-953
1 1⁄2 x 1 1⁄2 x 12 ga. 1 1
1 ⁄2 x 1 ⁄2 x 12 ga.
1 1⁄2 x 1 1⁄2 x 14 ga.
G-975 B-900 1 1⁄2 x 1 1⁄2 x 12 ga.
B-900-M
G-956
1 1⁄2 x 7 ⁄8 x 12 ga. 1 1⁄2 x 7 ⁄8 x 12 ga. 1 1⁄2 x 1 1⁄2 x 12 ga.
B-901 B-900
G-965
1 1⁄2 x 1 7 ⁄8 x 12 ga.
1 1 1⁄2 x 3⁄4 x 14 ga.
1 ⁄2 x 3 x 12 ga.
B-901
B-906
G-973-2-1⁄4
G-955
1 1⁄2 x 3 x 12 ga.
B-902
B-911-1⁄4
G-972-1/2 G-974-1-1/4 G-1012

Nipple Hanger with H-115-A bolt
Lock nut and square nut plus
and bushing G-1016 and H-118-C washers
H-111-B
Electrical Conductors “Lay-in” the Channel

Kindorf® Surface Raceway channels provide a central wiring distribution Kindorf® channels, installed slot-side down, are designed to provide fixture
system with conductor capacity that exceeds requirements of any lighting support only. A range of accessory fittings permit fixture attachment to the
layout and with “power to spare” for other uses. Channel adapts to any channel safely and securely in an approved manner. Channels with solid
interval of structural support — may be dropped to any level where it base or with slots are generally used for simple channel support systems.
becomes a rigid platform for fixture attachment. Lighting fixtures may be
spaced and fastened anywhere along the channel system with “plug-in” Channel support systems combine economy of investment with maximum
or direct-feed electrical connection. strength and rigidity. The continuous-slot channel provides complete
flexibility of lighting layout with fixture spacing continuous or intermittent.
Branch lighting circuit conductors are completely enclosed in channel from
Fixtures may be added or relocated to meet changing requirements without
panel to fixture, eliminating the ordinary “clutter” of external conductors
disturbing the basic support system. The rigid channels maintain fixture
and protecting the wires from physical damage.
alignment and adapt to any interval of structural support.
Listed by Underwriters Laboratories, Inc.
C-53
17⁄8
G-950 Fixture Hanging Channel
11⁄8
4 ft.
2 1⁄4 G 950 1 1⁄2" x 1 7⁄8" x 12 ga. G-978C
11
⁄16" x 2 1⁄4" slots on 4 foot centers.
4 ft.
20 ft. lengths only 194#/C ft.
11⁄8 Standard finish: Galv-Krom®.

1 1⁄2
1 1 ⁄2
1
⁄2

3
G-953 1 ⁄2" x 1 ⁄2" x 12 ga.
1 1
G-958
Fixtures attached to channel of G-973-2-1⁄4 shoulder bolts. 154#/C ft.
13
⁄32 1
13
⁄3 2" x 3" slots on 4" centers.

1 ⁄2 1 To be used in place of G-975 channel when heavy
fixtures are used or supports are on wider spacing.

1
⁄2 KO
G-955 11⁄2" x 3" x 12 ga. G-978-D G-957
3 G-959
6
270#/C ft. UL Listed for raceway.
⁄2" KOs on 6" centers.
1

⁄4
3
Similar to G-953 channel except lighter

11⁄2 gauge and only 3⁄ 4" deep.
1
⁄2

3
G-956 1 1⁄2" x 3⁄4" x 14 ga. G-960
Fixtures attached to channel by means of G-973-1-1/2 shoulder bolts
13
⁄32
or G-973-2-1⁄4 fixture bolts. 80#/C ft.
1 13
⁄32" x 3" slots on 4" centers.
C-54
G-957 End Cap

Blank end cap for use with G-955 and B-902 channel.
3 1⁄8
CAT. NO. WT. LBS./C

G 957 14
11⁄8
14 ga. steel. 15⁄16

UL Listed for raceway.
Galv-Krom® finish.
G-958 Channel Joiner

For 11⁄2" deep-slotted channel G-953. 17⁄16
19⁄16
1
⁄2
CAT. NO. WT. LBS./C 13

⁄32 8
1
G 958 92
Four 3⁄8" x 3⁄4" bolts and nuts are furnished with the joiner.
3
14 ga. steel.
Galv-Krom® finish. Bolts and Nuts 1
⁄2
G-959 End Cap

For use with G-955 and B-902 channel.
1 3⁄ 8
3
⁄ 8 Stud Nut
CAT. NO. DESCRIPTION WT. LBS./C G-974-1⁄2
11
⁄16
G 959 With two 1⁄2" Knockouts 31
12 ga. steel. 1
⁄2 KO
Galv-Krom® finish.
G-960 Channel Joiner

For 3⁄4" deep-slotted channel G-956. ⁄4
3
19⁄16
1
⁄2
13
⁄32 1 8
CAT. NO. WT. LBS./C
G 960 70
3
Four 3⁄8" x 3⁄4" bolts and nuts are furnished with the joiner.
14 ga. steel.
Galv-Krom® finish. 1
⁄2
Bolts and Nuts
C-55
G-962 and G-962-D Channel Hangers

G-962 fits around 11⁄2" or 17⁄8" deep channel. G-962-D series
hangers for 3" deep channel.
11⁄4 WT. WT. DIM. A

A
CAT. NO. LBS./C CAT. NO. LBS./C HANGER SIZE (IN.) (IN.)
G 962 1 40 G-962-D-1 47 1
⁄4 and 3⁄8 rod 13
⁄32
16 Ga. G-962-2 42 G-962-D-2 47 1
⁄2 rod and 1⁄4 pipe 9
⁄16
C G-962-3 39 G-962-D-3 47 3
⁄8 pipe and 5⁄8 rod 11
⁄16
B
G-962-4* 47 G-962-D-4** 47 1
⁄2 pipe 7
⁄8
5
⁄16
** Load rating of 700 lbs. with a safety factor of three.
11⁄2
“B” dimension for G-962: 2 1⁄2"; for G-962-D: 4".
“C” dimension for G-962, 1 37⁄64", for G-962-D, 3 7⁄64".
Galv-Krom® finish.
G-963 Channel Hanger

For use with G-953 or G-956 channel. Does not interfere
11⁄2 with fluorescent fixtures.
12 Ga. A 13⁄16
137⁄64
CAT. NO. HANGER SIZE (IN.) DIM. A (IN.)
13⁄32
G-963-1 ⁄4 and ⁄8 rod
1 3 13
⁄32
⁄8
1
G-963-2 ⁄2 rod and 1⁄4 pipe
1 9
⁄16
⁄32
13 Load rating of 900 lbs. with a safety factor of three.
1 x 3⁄8 - 16
48#/C.
Galv-Krom® finish.

Provides a combination fixture support and surface raceway.
17⁄8 3 ⁄2 KO
1
11⁄2 CAT. NO. DESCRIPTION JOINER END CAP
6 1 1⁄ 2" x 1 7⁄ 8"
G-965 12 ga., 190#/C ft. G-978-C 6959
⁄2" knockouts on 6" centers.
1
G-966 Blank End Cap

For 17⁄8" deep channel.
157⁄64
11⁄8
CAT. NO. WT. LBS./C
15⁄16 G 966 8
Galv-Krom® finish.
C-56
G-967 Blank End Cap G-969A Closure Strip for Kindorf® Channel
• For use with 11⁄2" deep channel • For use with all channel series to complete enclosure
17
⁄16 1
⁄16
+.010
17
⁄32
G-967 1.325 -.000
1
⁄16

5
⁄32 ⁄16
3
3
⁄8 113⁄32
G-969A
1.548
G-967
1
⁄8
G-969AP
#14 GA.
11⁄8
1.312 +.000
-.015
WT. CAT. NO. DESCRIPTION

CAT. NO. LBS./C
G 969A Steel Closure Strip — Galv-Krom® finish
G 967 6 G-969AP Plastic Closure Strip — Gold
UL Listed for raceway. 19 ga. steel. 35#/C.
Galv-Krom® finish. UL Listed for raceway.
G-968 Blank End Cap G-972 Nipple Malleable Iron

• For ⁄4" deep channel
3
The 1⁄2" size can nipple fixtures through channel knockouts. All sizes
can be fastened to the open slot of all Kindorf® channels. Locknut
supplied with nipple.
17
⁄64 1
⁄16
.620 ±.005
A
1
⁄16
3
⁄16
.091 3
⁄8
B
.704
G-968
11⁄8 .054 C
+.000 #14 GA.
1.312 -.015
DIMENSIONS (IN.) WT. IN

WT. G 972 1/2 1
⁄2 pipe size ⁄8
7
11⁄4 7
CAT. NO. LBS./C G-972-3/4 3
⁄4 pipe size ⁄8
7
11⁄4 11
G 968 3 G 972 L 1/2 1
⁄2 pipe size 2 11⁄4 9
UL Listed for raceway. The extra length of the G-972-L-1/2 permits its use as a spacing nipple
when locked into knockout or continuous slot.
Galv-Krom® finish.
Load rating 750#, with a safety factor of 3.
Galv-Krom® finish.
C-57
G-969 or G-969P Closure strip

G-972-HB-1⁄2 Steel Fixture Hanger Adapter
G-975
The Fixture Hanger Adapter extends the flexibility of the Kindorf®
System by easily adapting the 3⁄4" hanger size of high-intensity
fixtures to channel mounting.
G-972-1⁄2
The hanger adapter securely mounts the fixture hanger or box
Nipple to the channel through the 1⁄2" KO in the base. No special tools
are needed for installation of fittings and fixtures.
G-972-HB-1⁄2 & 3⁄4 Kindorf® channel, with 1⁄2" KOs every 6",
Fixture hanger hangs and feeds the fixtures — thus
adapter
simplifying installation.
Fixture hanger
Fixture box
and fixture
WT.
CAT. NO. DESCRIPTION LBS./C
G 972 HB 1/2 Galv-Krom® finish 17
G-973 Shoulder Type Fixture Bolt and Nut

For use in fastening fixtures to slotted channels. Permits the preassembly
of hardware to the fixture. The head of the G-973 is simply inserted into
the channel slot and twisted 90° to seat. The fixture is secured tightly
when the nut is run home.
USED WITH WT.

CAT. NO. CHANNEL SIZE (IN.) LBS./C
G 973 1 1/2 G-956 1
⁄2 x 1 1⁄2 7
G 973 2 1/4 G-953 3
⁄8 x 2 1⁄4 10
Galv-Krom® finish.
G-974 Fastener
Will fasten fluorescent fixtures to G-975 through knockouts or to
the open slot of all Kindorf® channels when installed slot down.
WT.
CAT. NO. SIZE (IN.) LBS./C
G-974-1/2 ⁄4 x 1⁄2
1
8
G-974-3/4 ⁄4 x 3⁄4
1
8 1⁄ 2
G-974-1 1
⁄4 x 1 9
G 974 1 1/4 1
⁄4 x 1 1⁄4 10
G-974-1-1/2 1
⁄4 x 1 1⁄2 11
Galv-Krom® finish.
C-58

Designed to provide a combination fixture support and surface
raceway. Fixture attaches to KOs by G-972-1⁄2 nipple for
wiring, or a G-974 stud nut where wiring is not required.
11⁄2
3
1 1⁄2" x 1 1⁄2" 11⁄2

G 975 10 12 ga. G978A G967 ⁄2 KO
1
G 975 20 12 ga. G978A G967

6
G 975 M 10 14 ga. G1503-S G979

G 975 M 20 14 ga. G1503-S G979
G-975: 160#/C ft. G-975-M: 107#/C ft. UL Listed for raceway.
1
⁄2" knockouts on 6" centers.
G-976 Connector
Accepts either 1⁄2" or 3⁄4" conduit to feed control channel when 11⁄2
used as a combination raceway and lighting fixture support.
Includes two stud nuts. Malleable iron.
4
WT.
CAT. NO. DESCRIPTION LBS./C ⁄16
11
G 976 Galv-Krom finish

®
54
Load rating 1,000# with a safety factor of 3. 3
⁄4 Conduit Thd. in
UL Listed for raceway. Main Unit
G-977 Swing Connector

(Channel Feed Hanger)
11⁄2
Provides a 15° swing in either direction to the channel run.
Accepts 1⁄2" or 3⁄4" conduit, or may be adapted for use with 5
3
⁄8" fixture stem when specified.
WT. ⁄4 Conduit Thd.

3
in Main Unit 2 5⁄32

G 977 Galv-Krom® finish 130
Includes two stud nuts.
Malleable iron.
Load rating of 1,300 lbs. with a safety factor of three.
G-978 Joiners
To splice lengths of raceway channel. Installed by tightening
nuts on 1⁄4" studs which are permanently attached to a smooth 11⁄2
inner plate.
DIM. A WT. 3 71⁄2

CAT. NO. TYPE OF CHANNEL APPLICABLE (IN.) LBS./C
G 978 Use with G-975, G-975-M and 11⁄2 107
B-900, B-900-M 11⁄2
G-978-L Use with B-906 3
⁄4 87
G-978-D Use with G-955 and B-902 3 137 11⁄4
G-978-C Use with B-901, G-950 and G-965 17⁄8 122
A
Nuts included. 14 ga. steel.
Galv-Krom® finish.
C-59
G-978-A Joiners
1 ⁄2 1 For installations where fixtures are mounted flush to slot-down channels.
Fastening is accomplished by tightening flat head machine screws.
3 71⁄2
DIM. A WT.
CAT. NO. TYPE OF CHANNEL APPLICABLE (IN.) LBS./C
11⁄2 G 978A Use with G-975, G-975-M and 11⁄2 103
B-900, B-900-M
11⁄4
G-978-AL Use with B-906 ⁄4
3
83
14 ga. steel.
A
Galv-Krom® finish.
G-979 End Cap

Use with G-975 or B-900 channel to provide conduit entrance.
WT.
15⁄8 CAT. NO. DESCRIPTION LBS./C
G 979 1/2 For 7⁄8" Hole, 1⁄2" Conduit 25
G-979-3/4 For 13⁄32" Hole, 3⁄4" Conduit 25
11⁄2 17⁄8 Furnished with stud nut.
12 ga. steel.
Galv-Krom® finish.
G-1007 Panel Adapter

1 ⁄8
7
Mounts 11⁄ 2" x 11⁄ 2" raceway channel to panel board.
2 11⁄16 WT.
4 CAT. NO. LBS./C
17⁄8 G 1007 36
Complete with stud nuts.
1 ⁄16
1
13⁄8 UL Listed for raceway.

19⁄16
Galv-Krom® finish.
11⁄4
119⁄32
⁄16 Dia. Hole Total -1
13 G-1012 “Lay-In” Channel Hanger
11⁄2 3
⁄4
9
⁄32 Long x 1⁄8 Wide Slot
51
⁄64 13
135⁄64
WT.
Hinged channel hanger CAT. NO. DESCRIPTION LBS./C
for raceway channel. G 1012 Galv-Krom® Finish 33
3 1⁄8 14 ga. steel.
15⁄8 UL Listed for raceway.
C-60
G-1012-D “Lay-In” Channel Hanger

Hinged channel hanger for 3" deep raceway channel. 119⁄32
13
1 ⁄2
1 3
⁄4
51
⁄64
9
⁄32 Long x 1⁄8 Wide Slot
1 ⁄64
35 13

WT.
4 3⁄16
G 1012 D Galv-Krom® Finish 40
14 ga. steel. 15⁄8
G-1013 Hex Swivel Nuts

Two required for each G-1012 channel hanger to provide swivel action.
WT.
G 1013 3/8 For 3⁄8" Hanger Rod 7
G-1013-1/2 For 1⁄2" Hanger Rod 7
G-1016 Rubber Washer

Washers are 1" diameter, 1⁄ 4" thick with 5⁄ 16" hole.
Use with G-1012 fixture hanger as cushion between fixture and hanger.
WT.
CAT. NO. LBS./C
G 1016 1
G-1017 Mercury Vapor Hanger

To support high- or low-bay mercury vapor or heavy incandescent
fixtures from raceway channels. Permits plug-in connections with
G-1038 raceway outlets. 121⁄32
4 1⁄4
3 3⁄16
USED WITH DEPTH WT. 11⁄8 Dia. Hole

CAT NO. CHANNEL SIZE (IN.) LBS./C
G 1017 B-900, B-901 4 1⁄4 76 C
2
G-975, G-965
Galv-Krom finish.
®
C-61
3
⁄4 – 14 N P S Thread
with 3⁄4 to 1⁄ 2 Reducer
G-1020 End Swivel Joint
Mounts to 11⁄2" x 11⁄2" raceway channel. Threaded for 3⁄4" conduit or fitting.
Swivel action adapter for 1⁄2" conduit furnished.
15°
2 13⁄ 16
CAT. NO. DESCRIPTION WT. LBS./C
1 3⁄ 8 G 1020 Galv-Krom® Finish 40

17⁄8 G-1021 Threaded End Fitting

Mounts to 11⁄2" x 11⁄2" raceway channel. Threaded for 1" conduit
or fitting. No swivel action.
1 ⁄8
3
2 13⁄16
1" Pipe
1 1⁄2 Thread
1 7⁄8
G 1021 Galv-Krom® Finish 32
1" I.D. UL Listed for raceway.
9
⁄32 Dia Holes
2 ⁄16 11
Total 2 G-1032 Channel Swivel Joint
Provides a 15° swivel action (to offset possible movement) for connection
of 1⁄2" or 3⁄ 4" conduit to raceway channels. May be accepted for use with
11⁄2
3
⁄8" fixture stem when specified. Order two G-974 3⁄ 4" fasteners for
channel mounting.
4
3
⁄4 Pipe Thread CAT. NO. DESCRIPTION WT. LBS./C
with 3⁄4 to 1⁄2 15°
reducer G 1032 Galv-Krom® Finish 25
13⁄8 Load rating 500# with a safety factor of 3.
3
⁄16 UL Listed for raceway.
G-1033 4" Diameter Swivel Cover

Cover for G-2000 through G-2004 junction boxes.
4 Use with 3⁄4" or 1⁄2" conduit. Swivel action.
3
15"
3
⁄4 Pipe Thread
with 3⁄4 to 1⁄2 CAT. NO. DESCRIPTION WT. LBS./C
Reducer G 1033 Galv-Krom® Finish 35
13
⁄32 3
⁄6
Load rating 400 lbs. with a safety factor of three. UL Listed for raceway.
C-62
Raceway Outlets
G-1038-B Housing Only
G 1038 B Gold Finish 25

G-1038-C Duplex Cover Plate
Complete unit including housing, CAT. NO. DESCRIPTION WT. LBS./C
Complete unit including housing, standard single 3-wire, 15-amp.
standard duplex 3-wire, 15-amp. G 1038 C Gold Finish 12
125-volt NEMA ground receptacle
125-volt NEMA ground receptacle and cover plate.
and cover plate.
G-1038-CA Single Cover Plate

G 1038 CA Gold Finish 14
Size of opening: 1.391 diameter
Complete unit including housing, Complete unit including housing,

duplex, 3-wire, 15-amp. single, 3-wire, 15-amp.
277-volt-twistlock receptacle 277-volt-twistlock receptacle G-1038-CX Blank Cover Plate
and cover plate. and cover plate.
G 1038 CX Gold Finish 15

G 1038 Gold Finish 55 G-1060 Nylon Bushing
G 1038 A Gold Finish 50
G-1038-D Gold Finish 60 CAT. NO. WT. LBS./C
G 1038 E Gold Finish 50 G-1060 2
UL Listed for raceway. Strain relief bushing to protect lead from fluorescent fixture.
C-63
Channel Joiners for Lay-In Wiring Channel should be supported

a minimum of 12" from joiner.
The direction-change joiner fittings for Kindorf Channels expand to
®
three, the number of channel depths available for complete raceway

wiring systems.
Joiner fittings are made for 11⁄2", 17⁄8" and 3" depths of 11⁄2" wide channels.
These three systems provide raceway conductor fill capacities for any
lighting layout and with erected strength to spare for lighting fixture support.
The joiner fitting rests inside the channel without obstructing the channel,
or the lay-in of electrical conductors. No time-consuming “fishing” of
conductors at the elbows, tee and crosses.
Installation is fast. Simply insert the fitting into the end of the channel and
turn the captive set-screw. This “jack-screws” the fitting sidewalls beneath
the channel lips for snug, strong joints. Standard Kindorf® Channel Closure
Strip is used for a completely enclosed raceway.
Listed by Underwriters Laboratories, Inc.
G-1500, G-1870 and G-3000 Series Direction

Change Joiner Assemblies
Direction change joiners for 11⁄2", 17⁄8" and 3" deep raceway channels
complete with screws and washers. Joiners fit into end of channel. When
screws are tightened, joiner is forced up against channel lips for secure
Elbow (L) Cross (X) Straight (S) Tee (T)
installation. Conductors can be laid in, no pulling required. No need for
junction boxes. Available in X, T, L and S configurations. Support required
within 12" of each joiner.
1 X-Style — G-1500X,
G-1870X and G -3000X
4 9⁄32
CAT. NO. FOR USE WITH CHANNEL NO. WT. LBS./C
Cast Aluminum
4 9⁄32 G 1500 X B-900 & G-975 44
G-1870X B-901 & G-965 51
G-3000X B-902 & G-955 79
Galv-Krom® finish.
1
T-Style — G-1501T,
G-1871T and G-3001T
4 9⁄32
Cast Aluminum
2 49⁄64
G 1501 T B-900 & G-975 34
G-1871T B-901 & G-965 45
G-3001T B-902 & G-955 66
Galv-Krom® finish.
C-64
Kindorf® Raceway System Fittings

for 11⁄2" x 11⁄2" Channel Systems
The Kindorf® Channel system serves both as a raceway for electrical
conductors and a support system for the electrical outlets or tap-offs.
Kindorf® is a complete wiring and support system with fittings and
accessories for the design and installation of your electrical system.
A full line of direction change junction boxes are provided for use
with the Kindorf® raceway system. These are made up of a standard
Steel City® octagon box, box cover and attachment fittings. Assemblies

as shown are available complete, or members can be purchased
separately to make up a junction.
ITEM QUANTITY
The assembly consists of the following components:
Junction Boxes for 11⁄2" x 11⁄2" Raceway Octagon Box 1
Channels — Galv-Krom® Finish Box Cover 1
Locknuts 1, 2, 3, or 4 (as required)
When purchased as an assembly, the octagon box and cover are Nipples 1, 2, 3, or 4 (as required)
Galv-Krom® finish to match the channel and end cap and all parts End Caps 1, 2, 3, or 4 (as required)
are factory fabricated.
L-Style — G-1502L,
G-1872L and G-3002L
Cast Aluminum 2 49⁄64 1
G 1502 L B-900 & G-975 25

G-1872L B-901 & G-965 32
G-3002L B-902 & G-955 51
Galv-Krom® finish. 2 49⁄64
S-Style — G-1503S, G-1873S

and G-3003S
Steel
G 1503 S B-900 & G-975 21 11⁄8
G-1873S B-901 & G-965 25
G-3003S B-902 & G-955 36
5
Galv-Krom® finish.
C-65
Raceway Junction Boxes G-2000 Junction Box

®
Kindorf Raceway System Fittings Complete with cover, locknuts, nipples and end caps. Type “E” dead-end
junction box for raceway channel. Accepts standard devices and covers
for 11⁄2" x 11⁄2" Channel Systems. for 4" octagon outlet boxes.
41⁄8 6 5⁄8
1 ⁄16
13
13⁄4
G 2000 G 2001
Type “E” 100 lbs./C Type “C” 121 lbs./C 2 ⁄16
3
119⁄32

G-2001 Junction Box

Complete with cover, locknuts, nipples and end caps. Type “C” straight-
through junction box for two raceway channels. Accepts standard
devices and covers for 4" octagon outlet boxes.
G 2002 G 2003 113⁄16
Type “L” 90° Type “T” 140 lbs./C 13⁄4
17⁄8
2 3⁄16
119⁄32

G 2004 G-2001
Type “X” 150 lbs./C Junction Box with No.
5402-LR outlet box cover
G-2002 Junction Box
and field mounted duplex Complete with cover, locknuts, nipples and end caps. Type “L” 90° junction
receptacle. box for two raceway channels. Accepts standard devices and covers for
4" octagon outlet boxes.
6 5⁄8
113⁄16
13⁄4
2 3⁄16
119⁄32
G-1007 G-1033
36 lbs./C For 1⁄ 2" or 3⁄ 4" conduit feed CAT. NO. DESCRIPTION WT. LBS./C
from outlet box 35 lbs./C
G 2002 Galv-Krom Finish
®
120
C-66
G-2003 Junction Box G-2006 Junction Box

Complete with cover, locknuts, nipples and end caps. Type “T” junction
box for three raceway channels. Accepts standard devices and covers
for 4" octagon outlet boxes.
113⁄16

2 3⁄16 13⁄4 13⁄4
119⁄32 3 5⁄8
7 1⁄8
CAT. NO. DESCRIPTION WT. LBS./C CAT. NO. DESCRIPTION WT. LBS./C
G 2003 Galv-Krom® Finish 140 G2006 Galv-Krom® Finish 225

Complete with cover, locknuts, nipples and end caps. Type “X” junction
box for four raceway channels. Accepts standard devices and covers
for 4" octagon outlet boxes.
113⁄16
2 3⁄16
119⁄32 13⁄4 3 5⁄8 13⁄4
7 1⁄8
G 2004 Galv-Krom Finish

®
150 G2007 Galv-Krom Finish
®
261
1 9⁄16
4 11⁄16
2 1⁄8
4 11⁄16
G2005 Galv-Krom® Finish 189 G2008 Galv-Krom® Finish 290
C-67
Hardware and Threaded Components
Fast Installation and Low Maintenance H104 Hanger Rod,

Continuous Thread — Galv-Krom®
“Threads” are an integral part of erector systems because nearly WT./LBS.
everything hangs by or is secured by threaded fasteners. Kindorf® CAT. NO. SIZE PER 100 PCS.
threaded hardware includes continuous rolled-thread hanger rod, H104 1/4X6 73

and special and standard screws and nuts designed with the H104 1/4X10 ⁄4"–20
1
124
necessary holding power to serve the requirements of framing H104 1/4X12 148
and hanging installations. H104 3/8X6 172
It is vital that each thread be fully protected against rust and corrosion H104 3/8X10 3
⁄8"–16 293
because they are usually exposed to corrosive atmospheres. Kindorf® H104 3/8X12 348
threaded hardware and accessories are completely protected by the H104 1/2X6 313
same Galv-Krom® finish that protects Kindorf® channel and fittings. H104 1/2X10 ⁄2"–13
1
530
Kindorf® extra-quality threads are always: H104 1/2X12 648
H104 5/8X6 510
• Free-running — clean, uniform H104 5/8X10 ⁄8"–11
5
850
• Corrosion resistant — no paint required H104 5/8X12 1,020
Suffix indicates rod size and length.
• Burr-free — smooth finish
Trouble-free threaded hardware is an investment in fast installation and low
maintenance. Free-running threads are a time saving asset on every job —
saving fingers and tempers, and eliminating delays that result when threads R-Series Continuous Thread Rod —
must be specially treated before use. Threaded rod is packed in tubes to Electro-Galvanized
prevent damage during shipment. Kindorf® threaded hardware is produced
from high-tensile strength carbon steel with Unified National Coarse
(U.N.C.) threads. Galv-Krom® finish is standard.
• 6-, 10- and 12-foot lengths continuous thread
WT./LBS.
CAT. NO. SIZE PER 100 PCS.
R628-6 FT. ⁄4"–20
1
74
R1028-10 FT. 120
R638-6 FT. 3
⁄8"–16 174
R1038-10 FT. 290
R648-6 FT. ⁄2"–13
1
324
R1048-10 FT. 530
Suffix indicates rod size and length.
H-193 Hanger Rod supports conduit
from G-962-D hanger.
ASTM Class 2.
NATIONAL COARSE THREAD
SIZE THREADS LBS./ DESIGN LOAD
(IN.) PER INCH 100 FT. LBS.
1
⁄4 20 12.5 150
3
⁄8 16 29.0 610
1
⁄2 13 53.5 1,130
5
⁄8 11 85.0 1,810
3
⁄4 10 123.0 2,710
7
⁄8 9 130.0 3,770
1 8 214.0 4,960
Grade ASTM A-510.
C-68
H115 U-Bolts H119 Steel Rod Coupling

“U” bolt to support, For coupling lengths of H-193 hanger rod. Right-hand threaded.
anchor or guide pipe Threads tapered to lock rods in place.
lines. Sizes through
4" are furnished with B A
one hex nut per leg
in Galv-Krom®. H-286 C
sizes 5" and above are
furnished with two hex B
nuts per leg in black.

A
DIMENSIONS (IN.) LOAD RATING WT.

CAT. NO. THREADS A B (LBS.) LBS./C
CAT. NO. REC. MAX. DIMENSIONS (IN.) WT. IN H119 1/4 1
⁄4 –20 7
⁄8 3
⁄8 240 2
AND PIPE SIZE LOAD (LBS.) A B C LBS./C H119 3/8 3
⁄ 8 –16 1 1⁄ 2 1
⁄2 610 4
H115 1/2 1,500 2 3⁄4 13⁄4 5
⁄16 13 H119 1/2 1
⁄2 –13 1 1⁄ 4 5
⁄8 1,130 5
H115 3/4 2,000 3 1⁄16 13⁄4 5
⁄16 15 H119 5/8 5
⁄ 8 –11 1 7⁄ 8 13
⁄ 16 1,810 10
H115 1 2,500 3 5⁄16 17⁄8 5
⁄16 16 Galv-Krom® finish.
H115 1 1/4 2,500 3 1⁄2 13⁄4 5
⁄16 17
H115 1 1/2 2,500 3 3⁄4 13⁄4 5
⁄16 18
H115 2 3,300 411⁄16 2 1⁄16 3
⁄8 32
E120, E130 Eyelet with 1⁄ 2" or 3⁄ 8" Stud
H115 2 1/2 4,000 5 1⁄8 2 1⁄16 3
⁄8 34 For bolting to a supporting member to furnish suspension
H115 3 4,000 5 11⁄16 2 3
⁄8 38 for rope, chain or cable.
H115 3 1/2 4,000 6 3⁄16 2 3
⁄8 40 A
H115 4 4,000 6 15⁄16 2 1⁄4 3
⁄8 46
H115 5 4,000 8 5⁄32 2 1⁄4 1
⁄2 128
H115 6 4,000 9 3⁄4 2 5⁄8 5
⁄8 239
H115 8 4,000 11 3⁄4 2 5⁄8 5
⁄8 283
Complies with Fed. Spec. WW-H-171E and MSS SP-69 Type 24. B
C
M117 Swivel Eye

• H-272 swivel eye has 3⁄8" or 1⁄2" tapped hole D
for hanger rod applications
CAT. NO. A B C D (LBS.) LBS./C
E120 3/8 ⁄ 8 –16
3
1 3⁄ 8 1 3⁄4 ⁄2
1
1,000 23
E130 1/2 ⁄ 2 –13
1
1 1⁄ 2 2 ⁄4
3
1,800 28
D B Safety factor of three.
E Galv-Krom® finish.
A
H-120 Saddle-Type Washer
C • For rigid attachment of rod to channel
• For use with either 3⁄ 8" or 1⁄ 2" hanger rod
CAT. NO. A B C D E (LBS.) LBS./C
WT.
M117 3/8B 3
⁄8 –16 2 3⁄4 11⁄2 13⁄16 7
⁄8 2,000 19 CAT. NO. LBS./C
M117 1/2B 1
⁄2 –13 2 3⁄4 11⁄2 13⁄16 7
⁄8 2,000 19
H-120 7
Safety factor of three.
Standard finish: Galv-Krom® unless otherwise specified.
C-69
Easily installs above

existing trapeze.
Handle Retro-Fit Trapeze
Applications with Ease!
Trap-Eze™ Connector
The innovative Kindorf® Trap-Eze™ Connector changes a time-consuming

retro-fit trapeze application into a streamlined process. Using a Kindorf®
Trapnut® Strut Fastener, the new Trap-Eze™ Connector can be easily
installed above or to the side of an existing assembly, eliminating the need
to disassemble and reassemble the trapeze. It is designed for use with
shorter strut lengths that can vary in length by as much as an inch,
so the strut can be rough cut versus labor-intense precision cuts.
• Easily installs above or to the side of an existing

assembly, eliminating the need to disassemble
Can be used to extend
existing trapeze.
and reassemble the trapeze
Designed for use with the
innovative Kindorf® Trapnut® • Connectors can be reused upon disassembly of a trapeze
Strut Fastener.
• Designed for either 3⁄8" and 1⁄2" threaded rod
• Designed for use with the innovative Kindorf® Trapnut®
Strut Fastener, which can take up to 43% less time than
standard nuts and washers on retro-fit trapeze applications
View window provides strut • View window provides safety zone for strut length
length safety zone for rough
cuts versus precision cuts.
STD.
CAT. NO. DESCRIPTION CTN.
For 11⁄2 Strut

B998 Trap-Eze™ End Connector Gold-Galv 20
Unique safety slot maintains B999 Trap-Eze™ Mid Connector Gold-Galv 10
bracket position on threaded rod B998EG Trap-Eze™ End Connector EG 20
and prevents disengagement of B999EG Trap-Eze™ Mid Connector EG 10
the trapeze system.
Trapnut® Strut Fastener
SIZE DESIGN STD.

H 122 3⁄8 CAT. NO. DESCRIPTION (IN.) LOAD LBS. CTN.
Trapnut ® Strut
Fastener Galv-Krom ® H 122 1/4 1
⁄4" Galv-Krom® 1
⁄4 150 50
H 122 3/8 3
⁄8" Galv-Krom® 3
⁄8 590 50
H 122 1/2 1
⁄2" Galv-Krom® 1
⁄2 1,080 50
H 122 1/4 EG 1
⁄4 150 50
H 122 3/8 EG 3
⁄8 590 50
H 122 1/2 EG 1
⁄2 1,080 50
H 122 1/4 SS6 1
⁄4 150 50
H 122 3⁄8 EG
Trapnut® Strut H 122 3/8 SS6 3
⁄8 590 50
Fastener SilverGalv® H 122 1/2 SS6 1
⁄2 1,080 50
C-70
E122 Swivel Joint H-134-S Spacer Assembly

Permits hanger rod to swing freely in any direction.
Used for attaching fixture to channel with a uniform
A 1" clearance between fixture and supporting
channel. Assembly includes a 1" spacer, a 5⁄8"–
18 x 11⁄2" bolt and jam nut, all galvanized.
B

D
WT.
CAT. NO. LBS./C
H-134-S 21
Approved for G.S.A. installations.
DIMENSIONS (IN.) LOAD WT.
CAT. NO. A B C RATING LBS./C
E122 3/8 ⁄ 8 –16
3
1 3⁄ 8 2 3⁄ 4 1,000 28
E122 1/2 ⁄ 2 –13
1
1 1⁄ 2 3 1,800 48
E142 Hex Head Cap Screw —
Safety factor of three.
Less Nut
Galv-Krom® finish.
E131 Swivel Joint with Stud

Same as H-260 but with a 3⁄8" or 1⁄2" stud on one end.
SIZES WT.
A
E142 1/2 15/16 1
⁄ 2 –13 x 3⁄4 7.0
1 E142 1/2 15/16 1
⁄ 2 –13 x 1 9.0
E142 1/2 15/16 1
⁄ 2 –13 x 1 9.0
E142 1/2 1 1/4 1
⁄ 2 –13 x 1 1⁄4 9.0
B E142 1/2 1 1/2 1
⁄ 2 –13 x 1 1 ⁄ 2 10.0
C E142 1/2 2 1
⁄ 2 –13 x 1 3⁄4 13.0
E142 1/2 2 1
⁄ 2 –13 x 2 14.0
B E142 1/2 2 1/4 1
⁄ 2 –13 x 2 1⁄4 16.0
E142 1/2 2 1/2 1
⁄ 2 –13 x 2 1⁄2 16.0
E142 1/2 3 1
⁄ 2 –13 x 3 20.0
E142 1/2 4 1
⁄ 2 –13 x 4 25.0
E142 3/8 3/4 3
⁄ 8 –16 x 3⁄4 3.0
DIMENSIONS (IN.) LOAD WT. E142 3/8 1 3
⁄ 8 –16 x 1 4.0
CAT. NO. A B C RATING LBS./C
E142 3/8 1 1/4 3
⁄ 8 –13 x 1 61⁄64 4.0
E131 3/8 3
⁄ 8 –16 1 3⁄ 8 2 3⁄4 1,000 25 E142 3/8 1 1/2 3
⁄ 8 –16 x 1 1⁄2 5.0
E131 1/2 1
⁄ 2 –13 1 1⁄ 2 3 1,800 52 E142 3/8 2 1/4 3
⁄ 8 –16 x 1 3⁄4 6.0
Safety factor of three. E142 3/8 2 1/4 3
⁄ 8 –16 x 2 1⁄4 7.0
Galv-Krom® finish. E142 3/8 2 1/4 3
⁄ 8 –16 x 2 1⁄4 7.0
E142 1/4 1 1
⁄4 x 3⁄4 1.0
E142 1/4 1 1
⁄4 x 1 1.0
E142 1/4 1 1/4 1
⁄4 x 1 1⁄4 1.5
E142 1/4 1 1/2 1
⁄4 x 1 1⁄2 2.0
C-71
E145 Hex Nut AB241 Square Washer

SIZES WT. DIMENSIONS (IN.) WT.
CAT. NO. (IN.) LBS./C CAT. NO. SIZE THICKNESS LBS./C
E145 1/4 1
⁄4 –20 1.2 AB241 1/4 1
⁄4 1
⁄8 8.10
E145 5/16 ⁄16 –18

5
2.0 AB241 5/16 ⁄16
5 1
⁄8 8.00
E145 3/8 3
⁄8–16 3.2 AB241 3/8 3
⁄8 3
⁄16 11.50
E145 1/2 1
⁄2–13 5.0 AB241 1/2 1
⁄2 1
⁄4 14.36 11⁄2
E145 3/8 5
⁄8–11 9.0 AB241 5/8 5
⁄8 1
⁄4 13.50
Standard finish: Galv-Krom® unless otherwise specified. AB241 3/4 3
⁄4 1
⁄4 12.50
AB241 7/8 7
⁄8 1
⁄4 13.00
E146 Square Nut
SIZES WT.
CAT. NO. (IN.) LBS./C Located Square Washers
E146 1/4 1
⁄4 –20 1.00 BOLT SIZE STD.
E146 5/16 ⁄16 –18
5
2.40 CAT. NO. (IN.) CTN.
E146 3/8 3
⁄8–16 2.37 AB-241L-1/4 1
⁄4 100
E146 1/2 1
⁄2–13 6.00 AB-241L-5/16 ⁄16
5
100
E146 5/8 5
⁄8–11 11.00 AB-241L-3/8 3
⁄8 100 19⁄ 16
Standard finish: Galv-Krom unless otherwise specified.
® AB-241L-1/2 1
⁄2 100
AB-241L-5/8 5
⁄8 100
GoldGalv® is standard finish.
54, E149 Round Head Machine Add “EG” suffix for SilverGalv®.
Screw — Less Nut
SIZES WT.
CAT. NO. (IN.) LBS./C H-550 Swivel Beam Clamp
54 571P 1
⁄ 4–20 x ⁄2 1
1.00
54-572-P 1
⁄ 4–20 x 3⁄4 1.25 One-piece malleable-iron casting. Attaches
54-574 1
⁄ 4–20 x 1 1⁄4 1.76 to beam flanges up to 3⁄4" thickness.
54-576 1
⁄ 4–20 x 2 2.54
E149 3/8 1 1/4 3
⁄ 8–16 x 3⁄4 3.45
E147 Flat Steel Washer

SIZES WT.
E147 1/4 1
⁄4 .67
E147 5/16 ⁄16
5
1.20
E147 3/8 3
⁄8 2.00
E147 1/2 1
⁄2 3.85
E147 5/8 5
⁄8 7.70
E147 3/4 3
⁄4 9.00
E148 Lock Washer

SIZES WT.
CAT. NO. (IN.) LBS./C CAT. NO. DESCRIPTION
E148 1/4 1
⁄4 .259 H-550 Max. load rating 500 lbs. with a safety factor of 3.33#C.
E148 5/16 5
⁄16 .550 Galv-Krom® finish.
E148 3/8 3
⁄8 .630
E148 1/2 1
⁄2 1.436
E148 5/8 5
⁄8 2.587
E148 3/4 3
⁄4 4.293
C-72
Fast, Precise Installation Method.

Kindorf® J-800 System
Designed originally to eliminate costly and time-consuming methods of installing
cables aboard ships, the Kindorf® J-800 series of straps, hangers and brackets has
found ever-widening applications by mechanical and electrical contractors in general
construction. The J-800 system has proven to be a work-saver when used to install
tubing or cable. Tubing and cable of various construction and fabrication can be
Copper Tubing Shipboard Cables
racked efficiently with built-in provisions for making additions or changes at a later

date. They can be secured in all combinations and sequences of sizes. A variety of
hangers and brackets secures multiple runs as well as single branch take-offs.
Installation of J-800 straps on Kindorf® supports is simple, requiring only a
screwdriver or small wrench. Each run is gripped individually on a hanger and all
runs are secured by tightening a single locking device. Loosening the locking device
permits fast access to the runs, making it easy to add, remove or adjust them
at any time.
J-800 installations have withstood the severe conditions of service at sea for many
years. In countless installations, they have proven their ability to withstand the effects
of salt air, moisture, shock and vibration.
Flexible Tubing Armored Cable
J-800 racking is well known for its fast, yet precise, installation method. A proven (Take-off from Cable Tray)
method that results in labor economy and neat, workman-like installation.
Installation Steps
1 2 3
Insert pin of strap in slot of hanger. Close Kindorf ® cable strap Push strap and cable to end of hanger slot
down over cable. so tongue of strap hooks below slot.
4 5 6
Apply second cable strap, hooking strap Apply locking device and tighten Drive locking device tight
tongue under pin of first strap. screw moderately. against cable strap. Tighten
locking device screw.
C-73
J-800 Interlocking Straps 11⁄32 Hole
One J-800 strap of the proper diameter is used to secure each

run. All straps have a 11⁄4" pin. In multiple runs the pin is simply 5
⁄8
twist inserted into the supporting Kindorf® hanger, bracket or 11⁄4
channel slot then the strap is closed over the cable or tube
to lock the strap tongue under the pin of the adjacent strap.
The same procedure is used for single runs, except the strap
tongue is secured directly to the hanger. When all multiple
runs have been assembled, they are secured by a single A
locking device.
J-800 straps can be installed along the continuous slot of any D
Kindorf® channel. This increases their versatility and extends
their possible applications. Straps are steel and have 10 ga. steel pin
Galv-Krom ® finish.
J-800 Interlocking Straps

USE IN USE IN USE IN
CAT. NO. STRAP A DIMENSIONS (IN.) WT. NEW KINDORF® OLD KINDORF® J SERIES
& SIZE SIZE GAUGE D MAX. LBS./C CHANNEL CHANNEL MOUNTINGS
J 800 8 8 18 .2500 2.50 — 0.250 0.250
J-800-10 10 18 .3124 2.60 — 0.313 0.313
J-800-12 12 18 .3750 2.75 0.250 0.375 0.375
J-800-14 14 18 .4375 2.90 0.313 0.438 0.438
J-800-16 16 18 .5000 2.75 0.375 0.500 0.500
J-800-18 18 18 .5625 2.90 0.438 0.563 0.563
J-800-20 20 18 .6250 3.35 0.500 0.625 0.625
J-800-22 22 18 .6875 3.50 0.563 0.688 0.688
J-800-24 24 18 .7500 3.65 0.625 0.750 0.750
J-800-26 26 18 .8125 3.80 0.688 0.813 0.813
J-800-28 28 18 .8750 3.95 0.750 0.875 0.875
J-800-30 30 18 .9375 4.10 0.813 0.938 0.938
J-800-32 32 18 1.0000 4.25 0.875 1.000 1.000
J-800-34 34 18 1.0625 4.40 0.938 1.063 1.063
J-800-36 36 18 1.1250 4.55 1.000 1.125 1.125
J-800-38 38 18 1.1875 4.70 1.063 1.188 1.188
J-800-40 40 18 1.2500 4.85 1.125 1.250 1.250
J-800-42 42 18 1.3125 5.00 1.188 1.313 1.313
J-800-44 44 18 1.3750 5.15 1.250 1.375 1.375
J-800-46 46 18 1.4375 5.30 1.313 1.438 1.438
J-800-48 48 18 1.5000 5.45 1.375 1.500 1.500
J-800-50 50 16 1.5625 6.38 1.438 1.563 1.563
J-800-52 52 16 1.6250 6.55 1.500 1.625 1.625
J-800-54 54 16 1.6875 6.73 1.563 1.688 1.688
J-800-56 56 16 1.7500 6.90 1.625 1.750 1.750
J-800-58 58 16 1.8125 7.08 1.688 1.813 1.813
J-800-60 60 16 1.8750 7.25 1.750 1.875 1.875
J-800-62 62 16 1.9375 7.43 1.813 1.938 1.938
J-800-64 64 16 2.0000 7.6 1.875 2.000 2.000
J-800-68 68 16 2.1250 7.95 1.938 2.063 2.063
J-800-72 72 16 2.2500 8.30 2.000 2.250 2.250
J-800-76 76 16 2.3750 8.65 2.125 2.375 2.375
J-800-80 80 16 2.5000 9.00 2.250 2.500 2.500
J-800-84 84 16 2.6250 9.35 2.375 2.625 2.625
Separate strap sizes rack 1⁄4" through 2 5⁄8" dia. rounds in 1⁄16" increments.
C-74
Cable and Mounting Systems
J-850 Locking Device J-852 Locking Device

Secures single or multiple interlocked assemblies on bar hangers, Secures single or multiple interlocked assemblies on bar hangers,
mounting brackets and continuous slot channel. For installations mounting brackets and continuous slot channels. Designed for use
not subject to severe shock. with B-900 Kindorf channels.

3
⁄4 1 1
⁄8
17⁄ 8 3
⁄ 16
12 ga.
CAT. NO. DESCRIPTION
J 852 Steel, Galv-Krom® Finish, 11 lbs./C.
12 ga. Lock Washer
11⁄4 J-855 Locking Device — Heavy-Duty

For use with channel-type hangers in installations subject to extreme shock.
J 850 Steel, Galv-Krom® Finish, 11 lbs./C.
Includes 1⁄4" screw, nut and lock washer.
J-851 Locking Device

Secures single or multiple interlocked assemblies on bar hangers,
mounting brackets and continuous slot channels. Similar to J-850
except stud replaces screw for easier assembly.
1
3
⁄4
11⁄4
159⁄ 64 5
⁄16 x 1 Bolt, Nut and Washer
12 ga.
3
⁄16
⁄16
3
12 ga.

J 851 Steel, Galv-Krom® Finish, 11 lbs./C. J 855 Steel, Galv-Krom® Finish, 11 lbs./C.
Includes 1⁄4" screw, nut and lock washer. Includes 5⁄16" bolt, nut and washer.
C-75
J-860 Mounting Brackets

U-style channel, 12-ga. steel, with Galv-Krom® finish,
3
⁄8" turned edge. Three sizes.
21
⁄32 19⁄32
DIMENSIONS WT.
CAT. NO. L (IN.) LBS./C
⁄64 Hole
55
3
⁄4
J 860 6 6 42
13⁄4 J-860-9 9 48
J-860-12 12 59
3
⁄8

U-style channel, 12-ga. steel, with Galv-Krom® finish,
5
⁄8" turned edge. Six sizes.
21
⁄32 19⁄32
DIMENSIONS WT.
CAT. NO. L (IN.) LBS./C
J 861 10 10 64
⁄6455
⁄4
3
J-861-12 12 73
Hole
J-861-14 14 86
2
J-861-15 15 89
J-861-16 16 96
5
⁄8
J-861-18 18 100

Straight, heavy-duty channel. 12-ga. steel, with Galv-Krom®
finish. Five sizes.
5
⁄8 ⁄8
5
L
21
⁄32 DIMENSIONS WT.
19⁄32 CAT. NO. L (IN.) LBS./C
J 863 6 6 42
J-863-9 9 57
J-863-12 12 73
⁄8
5
J-863-15 15 85
J-863-18 18 106
C-76
J-865 Bar Hanger

Supports one cable or tube up to 11⁄16" O.D. Only one
stud or screw necessary for mounting.
Dia Hole.
3
⁄ 64 ⁄32
11
1 1⁄ 4

2 1⁄ 4

J 865 Steel, Galv-Krom® Finish, 6.7 lbs./C.
1
⁄2
12 ga.
J-866 Bar Hanger

Supports one large or two small cables or tubes
up to a total of 15⁄16" O.D.
Dia Hole. 11
⁄32 21
⁄32 11
⁄32 11⁄4
16
⁄ 32
3
⁄4 16
⁄32
3 1⁄2
1
⁄2 J 866 Steel, Galv-Krom® Finish, 9 lbs./C.
12 ga.
J-867 Bar Hanger

• Cable or tube assembly locks in place with one short
1
⁄ 4" screw and nut
• Use two studs, welding pads or bolts to mount
3
⁄8 Dia Hole. ⁄64
29
61
⁄64 31
⁄32
11
⁄32 3
⁄64 11⁄4
⁄16
9 DIMENSIONS (IN.) WT.
A CAT. NO. A B LBS./C
B J 867 1 5 1⁄8 2 7⁄ 8 15
⁄8
5 5
⁄8 J-867-2 7 1⁄8 4 7⁄ 8 20
J-867-3 9 1⁄8 6 7⁄ 8 27
5
⁄8 Steel, Galv-Krom® finish.
C-77
J-868 Bar Hanger

Supports one cable or tube up to 11⁄16" O.D. Strap fastens ⁄64
3 11
⁄32 11⁄4
to hanger by short machine screw and nut.
9
⁄16
3
⁄8
12 ga.
5
⁄8
2 1⁄4

Use one stud or weld to mount.
J-869 Bar Hanger

• Supports one large or two small cables or tubes 3
⁄64 11⁄4
up to a total of 15⁄ 16" O.D. 11
⁄32
• Both ends of hanger have nut-engaging slot

3
⁄4 3
⁄4
3 3⁄8
3
⁄8
12 ga.
5
⁄8

J-870 Bar Hanger 29

⁄64
11
⁄32
• Supports cable or tube assembly, locked
in place with one short 1⁄ 4" screw and nut 11⁄4
• Mount by welding 1
⁄2 B ⁄16
9
A
12 ga.
CAT. NO. DIMENSIONS (IN.) WT.

& SIZE A B LBS./C
J 870 1 5 1⁄8 3 7⁄16 22.5
J-870-2 7 1⁄8 5 7⁄16 28.0
J-870-3 9 1⁄8 7 7⁄16 33.3
Steel, Galv-Krom® finish.
C-78
Angle Connector J-864 Slotted

Provides “On-the-Job” Channel
Versatility for Cable
10' length slotted channel
Racking and Mounting. provides “cut to length” versatility.
For use with standard marine
J-844 Channel steel banding. Uniformly spaced
slot size 13⁄32" x 3⁄4" spaced on 3⁄4"
Angle Connector centers. Cut anywhere along
Integral pilot, prevent twist entire length.

⁄64 Dia. Hole
55
15⁄16
Slotted Channel
Installation
15⁄8
Applications H-193-3/8
3
⁄ 8" Dia. Kindorf ®
Threaded Steel
⁄16
3
Hanger Rod
⁄64 Dia. Hole
55
Standard
Steel Band
J-844
J-844
Kindorf ® J-864 Channel Support Field-Cut to length required
J-844 7
⁄8
3
⁄4 11⁄2
155⁄64 3
⁄4 3
⁄4 3
⁄4
CAT. NO. DESCRIPTION CAT. NO. DESCRIPTION WT. LBS./C

J 844 Galv-Krom® Finish Mount, Band or Support at any Slot
J 864 10' Length 3⁄4" Deep Kindorf® Slotted Channel 65
Galv-Krom finish.
®
C-79
Stainless Steel Channels
B-900 Channel — Stainless 11⁄2 B-911 Channel —

Steel — 1 1⁄ 2" x 1 1⁄ 2" Stainless Steel
• Connection by means of continuous slot
CAT. NO. SIZE (IN.) THICKNESS (IN.) LBS./C
⁄8
7 B-911-3/8-SS† ⁄8 –16
3 3
⁄16 12.5
B-911-1/2-SS† ⁄2 –13
1 5
⁄16 16.0
†Self-holding clamping nut with spring attached. For use with 11⁄ 2" deep
1 ⁄2
1 channels.

B-900-10SS Type 304
Pipe Supports — Stainless Steel
B-900-10316-SS Type 316
Use H-113-B bolts and B-910-1/2 or B-911-1/2 stainless steel
nuts for mounting fittings.
Available 20 Ft. lengths.
C-105
B-905 Channel — Stainless Kindorf Straps for Rigid Conduit

Steel — 1 1⁄2" x 1 1⁄2" and Pipe — Type 304
• 9⁄16" holes on 11⁄2" centers punched
in channel base. Connection also
9
⁄16 11⁄2 RIGID CONDUIT OR RIGID CONDUIT OR
by means of continuous slot CAT. NO. PIPE SIZE (IN.) CAT. NO. PIPE SIZE (IN.)
C-105-1/2SS 1
⁄2 C-105-2SS 2
C-105-3/4SS 3
⁄4 C-105-2-1/2SS 21⁄ 2
⁄8
7
C-105-1SS 1 C-105-3SS 3
C-105-1-1/4SS 11⁄ 4 C-105-3-1/2SS 31⁄ 2
C-105-1-1/2SS 11⁄ 2 C-105-4SS 4
11⁄2

B-905-10SS Type 304 11⁄2
B-905-10-316SS Type 316
Use H-113-B bolts and B-910-1/2 or B-911-1/2 stainless steel
nuts for mounting fittings.
Scribe marks designate mid-point between holes for accurate
field cutting. Cobra®
Available 20 Ft. lengths. FOR EMT
AND RIGID STATIC LOAD
CONDUIT CABLE O.D. LIMIT (LB) STD.
CAT. NO. TRADE SIZE (IN.) RANGE (IN.) SAFETY FACTOR = 4 CTN.
B-907 Channel — Stainless Steel Electro-Galvanized Steel
• Connection by means of continuous slot CPC025SS6 ⁄4
1
0.312–0.600 200 100
or 9⁄16" holes on 11⁄2" centers CPC050SS6 ⁄2
1
0.650–0.890 200 100
17
⁄32 11⁄2 CPC075SS6 3
⁄4 0.860–1.110 200 100
CPC100SS6 1 1.100–1.400 200 100
CPC125SS6 11⁄4 1.400–1.725 200 50
CPC150SS6 11⁄2 1.690–1.980 200 50
CPC200SS6 2 1.980–2.576 200 50
11⁄2 CPC250SS6 21⁄2 2.576–3.060 350 25
CAT. NO. DESCRIPTION CPC300SS6 3 3.060–3.626 350 25
B-907-10SS Type 304 CPC350SS6 31⁄2 3.626–4.126 350 25
7
⁄8 ⁄4
3
B-907-10316SS Type 316 CPC400SS6 4 4.126–4.626 350 25

Available 20 Ft. lengths. Standard Finish — GoldGalv®, unless otherwise stated.
Stainless Steel: add suffix SS or 556.
C-80
Aluminum Channels
B-900-AL Channel 11⁄2 Pipe Supports — Aluminum

• Connection by means of continuous slot
⁄8
7
Aluminum (Extruded 6063-T6)

CAT. NO. DESCRIPTION 11⁄2
B-900-AL 1 ⁄2" x 1 ⁄2" x .1046; 58 lbs./C. ft.
1 1
Use H-113-B bolts and B-910-1/2, B-911--1/2

or B-911-1/2-TL steel nuts for mounting fittings.
10 ft. lengths only.
B-905-AL Channel
• 9⁄16" holes on 11⁄2" centers punched
in channel base. Connection also 9
⁄16 11⁄2
by means of continuous slot
⁄8
7
11⁄2
Aluminum (Extruded 6063-T6)

CAT. NO. DESCRIPTION 11⁄2
B-905-AL 11⁄2" x 11⁄2" x .1046; 56 lbs./C. ft.

Use H-113-B bolts and B-910-1/2 or B-911-1/2 steel nuts for
mounting fittings. Steel beam mounting application. Aluminum straps with stainless steel
10 ft. lengths only. hardware. Frame assembly carries multiple conduit runs.
B-907-AL Channel
• Connection by means of continuous Kindorf Straps for Rigid Conduit
slot or 9⁄16" holes on 11⁄2" centers
and Pipe — Aluminum
17
⁄32 11⁄2
RIGID CONDUIT ALUMINUM STRAP WT.
CAT. NO. OR PIPE SIZE (IN.) MATERIAL THICKNESS LBS./C
C-105AL-1/2 ⁄2
1
14 7
C-105AL-3/4 ⁄4
3
14 8
C-105AL-1 1 14 9
11⁄2
Aluminum (Extruded 6063-T6) C-105AL-1-1/4 11⁄ 4 14 10
C-105AL-1-1/2 11⁄ 2 12 12
CAT. NO. DESCRIPTION 7
⁄8 ⁄4
3
C-105AL-2 2 12 14
B-907-AL 11⁄2" x 3⁄4" x .1046; .37 lbs. /C. ft. C-105AL-2-1/2 21⁄ 2 12 16
Use H-113-A bolts and B-910-1/2 or B-912-1/2 steel nuts for C-105AL-3 3 12 18
mounting fittings. C-105AL-3-1/2 31⁄ 2 1
⁄ 8" 22
Holes on B-900 series fittings match channel holes. C-105AL-4 4 1
⁄ 8" 24
C-81
Steel PVC Coated Channels
PVC Coated Steel Channel and Fittings The physical properties of the PVC coating material are as follows:
for Highly Corrosive Atmospheres Hardness 90+ Shore A Durometer
Dielectric Strength 1100
The complete and lasting corrosion protection of conduit with polyvinyl (volts/mil @
chloride coating is now extended to the supporting system. No longer will

60 cycles)
installers be faced with the problem of installing PVC coated conduit or
other corrosion-resistant material only to have the support system require Flammability Self-extinguishing
constant maintenance or replacement. Tensile strength 2000 p.s.i.
PVC coated Kindorf® channel and fittings complement other corrosion- Percent elongation 180%
resistant services installed in chemical plants, foundries, meat packing
plants, oil refineries, paper mills, sewage treatment plants and other Aging 14,000 hours
locations. Atlas Weatherometer
The material is a thermoplastic and will soften in high temperatures.

Service life will be decreased if the normal operating temperature
of the support system is in excess of 225°F.
PVC Plastic-Coated Kindorf® Channel Support
The service life expectancy is 20 years in normal weathering,
System for Installations in Severely with no indication of hardening, softening or other physical change.
Corrosive Atmospheres The Kindorf® plastic-coated support system has excellent resistance to
the corrosive atmospheres created in modern processing industries which
PVC Coating materially reduce the life of standard products and cause high maintenance
The coating is a polyvinyl chloride (PVC) plastic coating that is permanently costs. The fused-on coating of PVC plastic to a pre-galvanized steel
fused to the Kindorf® Galv-Krom® galvanized steel channels, fittings and effectively bars corrosive action by eliminating “undercreep” or “corrosion
accessories. The fused-melt mixed powder (PVC) coating is 15 mils. travel”. There is practically no maintenance. No special tools are required
(.015") ±5 mils thickness. for installation of the Kindorf® PVC system.
The Kindorf® PVC coated support system, combining the strength of steel
and the corrosion resistance of plastic, is designed for mechanical support
of plastic and plastic-coated conduits and pipes. Kindorf® PVC meets the
requirements for corrosion resistance in those environments generally found
in chemical processing plants, oil refineries, steel mills, foundries, meat
packing and other food processing plants, fertilizer plants, textile and paper
processing industries.
PB-900-10
PVC Coated Steel Channel
PB-900-10 11⁄2" x 11⁄2" x 12 ga. 168
PB-905-10 Solid Base
PB-905-10 11⁄2" x 11⁄2" x 12 ga. 160
9
⁄16" Holes on 11⁄2" Centers
PB-907-10 11⁄2" x 3⁄4" x 14 ga. 82
9
⁄16" Holes on 11⁄2" Centers
PB-907-10 Standard 10 ft. lengths.
PVC Coated Steel Hanger Rod

CAT. NO. & SIZE DESCRIPTION WT. LBS./C
PBH-193-3/8-6 3
⁄ 8" x 6' 174
PBH-193-3/8-10 3
⁄ 4" x 10' 290
PBH-193
PBH-193-1/2-6 1
⁄ 2" x 6' 324
PBH-193-1/2-10 1
⁄ 2" x 10' 540
C-82
Steel PVC Coated Channels
PVC Coated Steel Conduit Straps

CAT. NO. & SIZE DESCRIPTION (IN.) WT. LBS./C CAT. NO. & SIZE DESCRIPTION (IN.) WT. LBS./C
PBC-105-3/4 3
⁄4 16 PBC-105-2-1/2 2 ⁄21
38
PBC-105-1 1 18 PBC-105-3 3 45
PBC-105-1-1/4 11 ⁄ 4 20 PBC-105-3-1/2 31 ⁄ 2 58
PBC-105-1-1/2 11⁄ 2 29 PBC-105-4 4 64
PBC-105-2 2 33 PBC-105

11⁄2
PVC Coated Hardware
PB-910-3/8 3
⁄8 –16 Steel Nut 9
PB-910-1/2 1
⁄2 –13 Steel Nut 10
PBH-119C-3/8 11⁄2" Square Washer with 7⁄16" Hole 12
PBH-119D-1/2 11⁄2" Square Washer with 27⁄32" Hole 14 PB-910 PBH-119 PBH-120
PBH-120 Saddle Washer for 3⁄8" or 1⁄2" Rod 7
PVC Coated Beam Clamps

PB-502 2"– 7⁄8" Jaw Tapped 3⁄8-16 95 PBE-763
PB-508 21⁄2"–2" Jaw Tapped 1⁄2-13 182
PBE-760-2 For Use with PB-900, PB-905, PB-906 or PB-907 80
PBE-763 For Use with all Channels 25 PB-500 Series
PBE-760
PVC Coated Framing Fittings
PB-915 PB-923 PBF-720 PB-943

PB-915 2-Hole Angle Connector 40
PB-923 3-Side Angle Connector 137
PB-927 U Support 53
PB-943 Double-Brace Connector 66
PBF-720-18 Single-Channel Wall Bracket — 18" 275
PBF-721-18 Double-Channel Wall Bracket — 18" 568
PBF-721 PB-927
C-83
Metallic Engineering Data and Specifications
Channel Load Data Y

Y
Y Y Y
X X X X X X X X X X
Y
Y
Y
B-900 B-906
11⁄ 2" x 3⁄4" x 14 ga. steel B-901 Y
11⁄ 2" x 11⁄ 2" x 12 ga. steel Y
17⁄ 8" x 11⁄ 2" x 12 ga. steel
B-900-M B-902
11⁄ 2" x 11⁄ 2" x 14 ga. steel B-900-2A
11⁄ 2" x 3" x 12 ga. steel 11⁄ 2" x 3" x 12 ga. steel
B-900-AL
11⁄ 2" x 11⁄ 2" x .1046 aluminum
X-X AXIS Y-Y AXIS

CHANNEL AREA LBS./FT. I S R I S R
Steel Section Properties

Material Properties f=30,000 E=30,000,000
B-906 0.217 0.740 0.018 0.041 0.272 0.077 0.105 0.559
B-900 0.521 1.776 0.155 0.179 0.545 0.200 0.259 0.619
B-900-M 0.354 1.206 0.101 0.123 0.535 0.129 0.175 0.603
B-901 0.595 2.028 0.263 0.251 0.665 0.238 0.309 0.632
B-902 0.837 2.852 0.909 0.552 1.042 0.363 0.471 0.658
SIMPLE BEAM SIMPLE BEAM

UNIFORMLY DISTRIBUTED LOAD CONCENTRATED CENTER LOAD
MAX 1
⁄240 SPAN DESIGN MAX 1
⁄240 SPAN DESIGN COL. LOAD
SPAN CHANNEL LOAD DEFLECTION LOAD LOAD LOAD DEFLECTION LOAD LOAD FOR K=1
B-906 820 0.034 1,200 820 410 0.027 750 410 7,337
B-900 3,580 0.017 10,333 3,580 1,790 0.014 6,458 1,790 7,628
12" B-900-M 2,460 0.018 6,733 2,460 1,230 0.015 4,208 1,230 7,625
B-901 5,020 0.014 17,533 5,020 2,510 0.011 10,958 2,510 7,660
B-902 11,040 0.009 60,600 11,040 5,520 0.007 37,875 5,520 7,699
B-906 547 0.077 533 533 273 0.062 333 273 6,852
B-900 2,387 0.039 4,593 2,387 1,193 0.031 2,870 1,193 7,507
18" B-900-M 1,640 0.041 2,993 1,640 820 0.033 1,870 820 7,499
B-901 3,347 0.032 7,793 3,347 1,673 0.026 4,870 1,673 7,579
B-902 7,360 0.020 26,933 7,360 3,680 0.016 16,833 3,680 7,665
B-906 410 0.137 300 300 205 0.109 188 188 6,172
B-900 1,790 0.069 2,583 1,790 895 0.055 1615 895 7,338
24" B-900-M 1,230 0.073 1,683 1,230 615 0.058 1,052 615 7,324
B-901 2,510 0.057 4,383 2,510 1,255 0.046 2,740 1,255 7,465
B-902 5,520 0.036 15,150 5,520 2,760 0.029 9,469 2,760 7,619
B-906 328 0.214 192 192 164 0.171 120 120 5,299
B-900 1,432 0.108 1,653 1,432 716 0.067 1,033 716 7,121
30" B-900-M 984 0.114 1,077 984 492 0.091 673 492 7,098
B-901 2,008 0.089 2,805 2,008 1,004 0.072 1,753 1004 7,319
B-902 4,416 0.057 9,696 4,416 2,208 0.046 6,060 2,208 7,560
B-906 273 0.308 133 133 137 0.246 83 83 4,231
B-900 1,193 0.156 1,148 1,148 597 0.125 718 597 6,855
36" B-900-M 820 0.164 748 748 410 0.132 468 410 6,822
B-901 1,673 0.129 1,948 1,673 837 0.103 1,218 837 7,140
B-902 3,680 0.082 6,733 3,680 1,840 0.066 4,208 1,840 7,487
For channel with holes in bottom, multiply load by 0.95.
For channel with holes in bottom and sides, multiply load by 0.90.
For extruded aluminum channel, multiply load by .33.
Column loads calculated in accordance with ANSI Light Gauge Cold-Formed Steel Design Manual, Section 3.6.
C-84
Channel Load Data (continued)

SIMPLE BEAM SIMPLE BEAM
UNIFORMLY DISTRIBUTED LOAD CONCENTRATED CENTER LOAD
MAX 1
⁄240 SPAN DESIGN MAX 1
⁄240 SPAN DESIGN COL. LOAD
SPAN CHANNEL LOAD DEFLECTION LOAD LOAD LOAD DEFLECTION LOAD LOAD FOR K=1
B-906 234 0.419 98 98 117 0.335 61 61 3,125
B-900 1,023 0.212 844 844 511 0.170 527 511 6,541
42" B-900-M 703 0.224 550 550 351 0.179 344 344 6,496
B-901 1,434 0.175 1,431 1,431 717 0.140 895 717 6,929

B-902 3,154 0.112 4,947 3,154 1,577 0.089 3,092 1,577 7,401
B-906 205 0.547 75 75 103 0.437 47 47 2,392
B-900 895 0.277 646 646 448 0.222 404 404 6,178
48" B-900-M 615 0.292 421 421 308 0.234 263 263 6,120
B-901 1,255 0.229 1,096 1,096 628 0.183 685 628 6,686
B-902 2,760 0.146 3,788 2,760 1,380 0.117 2,367 1,380 7,302
B-906 182 0.692 59 59 91 0.554 37 37 1,890
B-900 796 0.351 510 510 398 0.281 319 319 5,767
54" B-900-M 547 0.370 333 333 273 0.296 208 208 5,693
B-901 1,116 0.290 866 866 558 0.232 541 541 6,410
B-902 2,453 0.184 2,993 2,453 1,227 0.148 1,870 1,227 7,189
B-906 164 0.854 48 48 82 0.683 30 30 1,531
B-900 716 0.433 413 413 358 0.346 258 258 5,308
60" B-900-M 492 0.457 269 269 246 0.365 168 168 5,216
B-901 1,004 0.358 701 701 502 0.286 438 438 6,101
B-902 2,208 0.228 2,424 2,208 1,104 0.182 1,515 1,104 7,064
B-906 137 1.230 33 33 68 0.984 21 21 1,063
B-900 597 0.624 287 287 298 0.499 179 179 4,244
72" B-900-M 410 0.658 187 187 205 0.526 117 117 4,113
B-901 837 0.515 487 487 418 0.412 304 304 5,387
B-902 1,840 0.328 1,683 1,683 920 0.262 1,052 920 6,773
B-906 117 1.674 24 24 59 1.339 15 15 781
B-900 511 0.849 211 211 256 0.679 132 132 3,136
84" B-900-M 351 0.895 137 137 176 0.716 86 86 3,022
B-901 717 0.701 358 358 359 0.561 224 224 4,543
B-902 1,577 0.446 1,237 1,237 789 0.357 773 773 6,429
B-906 103 2.187 19 19 51 1.749 12 12 598
B-900 448 1.109 161 161 224 0.887 101 101 2,401
96" B-900-M 308 1.169 105 105 154 0.935 66 66 2,314
B-901 628 0.916 274 274 314 0.733 171 171 3,575
B-902 1,380 0.583 947 947 690 0.466 592 592 6,032
B-906 91 2.768 15 15 46 2.214 9 9 473
B-900 398 1.403 128 128 199 1.123 80 80 1,897
108" B-900-M 273 1.480 83 83 137 1.184 52 52 1,828
B-901 558 1.160 216 216 279 0.928 135 135 2,825
B-902 1,227 0.738 748 748 613 0.590 468 468 5,582
B-906 82 3.417 12 12 41 2.733 8 8 383
B-900 358 1.732 103 103 179 1.386 65 65 1,537
120" B-900-M 246 1.827 67 67 123 1.461 42 42 1,481
B-901 502 1.432 175 175 251 1.145 110 110 2,288
B-902 1,104 0.911 606 606 552 0.729 379 379 5,080
For channel with holes in bottom, multiply load by 0.95.
For channel with holes in bottom and sides, multiply load by 0.90.
For extruded aluminum channel, multiply load by .33.
Column loads calculated in accordance with ANSI Light Gauge Cold-Formed Steel Design Manual, Section 3.6.
C-85
Beam Formula Conclusion

For calculating deflection and maximum safe load Referring to the load span tables on pages C-84–C-85 for B-905
(Beams of uniform cross section) channel, a 36-inch span has a uniformly distributed load rating of
I = Moment of inertia, in position of load, in inches 4. 1,133 lbs., which is greater than the 390 lb. load calculated above,
and is therefore satisfactory.

S = Section modulus – in position of load l/n, in inches 3.
On longer spans or spans with greater loads, use B-901, B-900-2A
f = Bending stress in extreme fiber, in pounds per square inch. or B-905-2A channel or provide an intermediate support
E = Modulus of elasticity, in pounds per square inch.
L = Length of section, in inches. Note on Conduit Support
W = Superimposed loads supported by beam, in pounds. The 1987 edition of the National Electrical Code® states the rigid metal
W Max. = Maximum safe load at point given, in pounds. conduit, intermediate metal conduit, and electrical metallic tubing shall
be supported at least every 10 feet. See Article 346, Section 346-12
M = Maximum bending moment, in inch pounds.
for exceptions for rigid-metal conduit.
D, D1 = Deflections at points given, in inches.
D Max. = Maximum deflection at point given, in inches.
Steel and Aluminum

Modulus of Elasticity (E)
Steel — 29,500,000 pounds per square inch

Aluminum — 10,000,000 pounds per square inch
5"
M
M
36"
L
L 1
⁄2
1
⁄2
D
Problem
R R1 R W R1
X X Design trapeze to support 8–2" rigid steel conduits and 2–3" rigid
W
steel conduits on a No. B-905 channel span with hangers spaced
Beam supported at ends Beam supported at ends five (5) feet apart.
Concentrated load at center Uniformly distributed load
W max. = 4fS/L W max. = 8fS/L
D max. = WL3/48El D max. = 5WL3/384El
3" 3"
2" 2" 2" 2" 2" 2" 2" 2"
Maximum Fiber Stress (f)
Steel — 30,000 pounds per square inch 117⁄ 32 31⁄ 8 31⁄ 8 31⁄ 8 33⁄4 45⁄16 33⁄4 31⁄8 31⁄8 31⁄8 117⁄ 32
Aluminum — 10,000 pounds per square inch 13⁄16 1 ⁄16
3
36"
M Weight per Hanger Equals

M
L
L
2" rigid steel conduit with heaviest conductor combination =
1
⁄2 1
⁄2
1
⁄2
6.625 lbs. per foot.
1
⁄2
D 3" rigid steel conduit with heaviest conductor combination =
D R R1
X D1
13.415 lbs. per foot.
W W W W 8 x 6.625 x 5 = 265 lbs. = weight of 2" conduits per hanger
2 2 2 2
2 x 13.415 x 5 = 134 lbs. = weight of 3" conduits per hanger
Beam supported at ends Beam continuous over two supports
Two symmetrical concentrated loads Two exterior symmetrical loads Total = 399 lbs. = weight of conduits per hanger
W max. = 2fS/a W max. = 2fS/a
D max. = Wa/12El (3⁄4 L2 - a2) D, distance a = Wa(3aL-4a2)/12EI
D1, distance L/2 - a = Wa(2-2a)2/16EI
C-86
Conduit Spacings
Spacings in inches between centers of conduits.
The light face figures are the minimum dimensions to provide clearance between locknuts.
The more liberal spacings printed in bold face type should be used whenever possible.
SIZE (IN.) ⁄2
1
⁄4
3
1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4 41⁄2 5 6
⁄2
1
1 ⁄16
3
– – – – – – – – – – – –

13⁄8 – – – – – – – – – – – –
⁄4
3
15⁄16 17⁄16 – – – – – – – – – – –
11⁄2 15⁄8 – – – – – – – – – – –
1 11⁄2 15⁄8 13⁄4 – – – – – – – – – –
13⁄4 17⁄8 2 – – – – – – – – – –
11⁄4 13⁄4 17⁄8 2 21⁄4 – – – – – – – – –
2 21⁄8 21⁄4 21⁄2 – – – – – – – – –
11⁄2 115⁄16 21⁄16 23⁄16 27⁄16 29⁄16 – – – – – – – –
21⁄8 21⁄4 23⁄8 25⁄8 23⁄4 – – – – – – – –
2 23⁄16 25⁄16 21⁄2 23⁄4 27⁄8 31⁄8 – – – – – – –
23⁄8 21⁄2 23⁄4 3 31⁄8 33⁄8 – – – – – – –
21⁄2 27⁄16 29⁄16 23⁄4 3 31⁄8 33⁄8 35⁄8 – – – – – –
25⁄8 23⁄4 3 31⁄4 33⁄8 35⁄8 4 – – – – – –
3 213⁄16 215⁄16 31⁄16 35⁄16 37⁄16 33⁄4 4 45⁄16 – – – – –
3 31⁄8 33⁄8 35⁄8 33⁄4 4 43⁄8 43⁄4 – – – – –
31⁄2 31⁄8 31⁄4 33⁄8 35⁄8 33⁄4 41⁄16 45⁄16 45⁄8 415⁄16 – – – –
33⁄8 31⁄2 35⁄8 37⁄8 4 43⁄8 45⁄8 5 53⁄8 – – – –
4 37⁄16 39⁄16 311⁄16 315⁄16 41⁄16 43⁄8 45⁄8 415⁄16 51⁄4 59⁄16 – – –
33⁄4 37⁄8 4 41⁄4 43⁄8 43⁄4 5 53⁄8 55⁄8 6 – – –
41⁄2 33⁄4 37⁄8 4 41⁄4 43⁄8 45⁄8 47⁄8 51⁄4 59⁄16 57⁄8 61⁄8 – –
4 41⁄8 41⁄4 41⁄2 43⁄4 5 51⁄4 55⁄8 6 61⁄4 61⁄2 – –
5 41⁄8 41⁄4 43⁄8 45⁄8 43⁄4 5 51⁄4 59⁄16 57⁄8 63⁄16 61⁄2 613⁄16 –
43⁄8 41⁄2 45⁄8 47⁄8 5 53⁄8 55⁄8 6 61⁄4 65⁄8 7 71⁄4 –
6 43⁄4 47⁄8 5 51⁄4 53⁄8 55⁄8 57⁄8 63⁄16 61⁄2 613⁄16 71⁄8 77⁄16 81⁄8
5 51⁄8 51⁄4 51⁄2 55⁄8 6 61⁄4 65⁄8 7 71⁄4 75⁄8 8 85⁄8
C-87
Pipe Data
RIGID CONDUIT – ALUMINUM AND STEEL
NOMINAL OUTSIDE MAX. WEIGHT
OUTSIDE DIAMETER WEIGHT OF OF CONDUIT AND

TRADE DIAMETER OF COUPLING CONDUIT CONDUCTOR (LBS. PER FOOT)
SIZE (IN.) (IN. PER UL-6) (IN. PER UL-6) (LBS. PER FT.) NOT LEAD COVERED
STEEL ALUM. STEEL ALUM. STEEL ALUM. STEEL ALUM.
1
⁄2 0.840 0.840 1.010 1.078 0.790 0.274 1.040 .524
3
⁄4 1.050 1.050 1.250 1.328 1.050 0.364 1.760 1.074
1 1.315 1.315 1.525 1.563 1.530 0.530 2.695 1.695
11⁄4 1.660 1.660 1.869 1.953 2.010 0.696 3.975 2.661
11⁄2 1.900 1.900 2.155 2.219 2.490 0.822 5.000 3.332
2 2.375 2.375 2.650 2.750 3.320 1.157 6.625 4.462
21⁄2 2.875 2.875 3.250 3.281 5.270 1.825 9.460 6.015
3 3.500 3.500 3.870 3.812 6.830 2.389 13.415 8.974
31⁄2 4.000 4.000 4.500 4.438 8.310 2.877 16.690 11.257
4 4.500 4.500 4.875 5.000 9.720 3.400 20.410 14.090
5 5.563 5.563 6.000 6.219 13.140 4.654 29.350 20.864
6 6.625 6.625 7.200 7.313 17.450 6.120 41.910 30.580
THINWALL CONDUIT (EMT)

INTERMEDIATE METAL CONDUIT (IMC) PER UL-797
NOMINAL OUTSIDE MAX. WEIGHT NOMINAL MAX. WEIGHT
OUTSIDE DIAMETER WEIGHT OF OF CONDUIT AND OUTSIDE WEIGHT OF OF EMT AND
TRADE DIAMETER OF COUPLING CONDUIT CONDUCTOR DIAMETER EMT CONDUCTOR
SIZE (IN.) (IN. PER UL) (IN. PER UL) (LBS. PER FOOT) (LBS. PER FT.) (IN.) (LBS. PER FT.) (LBS. PER FT.)
⁄2
1
0.815 1.010 .6 0.850 0.706 0.285 0.538
⁄4
3
1.029 1.250 .8 1.530 0.922 0.435 1.160
1 1.290 1.525 1.1 2.325 1.163 0.640 1.825
11⁄4 1.638 1.869 1.5 3.465 1.510 0.950 2.950
11⁄2 1.883 2.155 1.8 4.330 1.740 1.100 3.674
2 2.360 2.650 2.4 5.725 2.197 1.400 4.436
21⁄2 2.857 3.250 4.2 8.470 2.875 2.050 6.400
3 3.476 3.870 5.2 11.845 3.500 2.500 9.262
31⁄2 3.971 4.500 6.1 14.500 4.000 3.400 12.100
4 4.466 4.875 6.8 17.510 4.500 3.700 15.355
C-88
Column Loading-Structure Channel

Maximum Load in Pounds — Column Loading
MAX.
NUMBER OF TIERS OR BRACES
COLUMN TYPE COLUMN
PER COLUMN
HEIGHT OF LOADING
(FT.) CHANNEL (LBS.) 1 2 3 4 5
B-900 8,625 2,590
1 B-900-2A 17,400 4,450

B-906 4,170 1,280
B-906-2A 8,570 2,160
B-900 7,900 2,520 2,000
2 B-900-2A 16,500 4,400 3,650
B-906 3,450 1,200 980
B-906-2A 7,840 2,100 1,720
B-900 6,960 2,420 1,960 1,780
3 B-900-2A 15,000 4,300 3,520 2,960
B-906 2,250 1,015 950 795
B-906-2A 6,680 2,020 1,700 1,435
B-900 5,970 2,280 1,910 1,640 1,360
4 B-900-2A 13,095 4,100 3,480 2,930 2,520
B-906 1,270 755 895 775 670
B-906-2A 4,980 1,830 1,660 1,420 1,230
B-900 5,055 2,140 1,850 1,560 1,340 1,180
5 B-900-2A 11,490 3,950 3,420 2,900 2,500 2,210
B-906 830 745 650 575
B-906-2A 3,340 1,550 1,610 1,400 1,215 1,075
MAX.
COLUMN TYPE COLUMN
NUMBER OF TIERS OR BRACES PER COLUMN
HEIGHT OF LOADING
(FT.) CHANNEL (LBS.) 1 2 3 4 5 6 7 8 9 10
B-900 4,275 1,990 1,790 1,540 1,325 1,150 1,035
6 B-900-2A 9,990 3,750 3,340 2,870 2,480 2,190 1,960
B-906 700 710 635 565 505
B-906-2A 2,170 1,240 1,550 1,370 1,205 1,065 955
B-900 3,645 1,840 1,720 1,490 1,310 1,140 1,025 925
7 B-900-2A 8,715 3,550 3,240 2,820 2,470 2,170 1,945 1,760
B-906 520 635 610 550 495 450
B-906-2A 1,450 1,330 1,180 1,050 945 860
B-900 3,045 1,670 1,650 1,460 1,290 1,130 1,015 920 835
8 B-900-2A 7,395 3,180 3,140 2,780 2,450 2,160 1,930 1,750 1,600
B-906 470 605 590 535 490 445 410
B-906-2A 1,330 1,290 1,160 1,040 935 850 780
B-900 2,580 1,520 1,570 1,430 1,260 1,120 1,000 905 825 760
9 B-900-2A 6,190 3,030 3,040 2,730 2,420 2,140 1,920 1,745 1,595 1,465
B-906 130 535 555 525 485 435 400 370
B-906-2A 1,200 1,250 1,150 1,020 930 840 775 715
B-900 2,100 1,340 1,500 1,380 1,230 1,110 990 900 820 755 700
10 B-900-2A 5,580 2,900 2,940 2,665 2,380 2,135 1,910 1,730 1,580 1,460 1,350
B-906 470 520 500 465 430 395 365 340
B-906-2A 1,160 1,190 1,120 1,010 915 835 770 710 660
This table recognizes eccentricity on the column caused by usual connections.
C-89
Examples for Using Selection of Hanger Rods

the Continuous Run USE H-193-3/8 USE H-193-1/2
OR ‘R’ SERIES OR ‘R’ SERIES
Load Chart for Channel HANGER ROD IF THE TOTAL HANGER ROD IF THE TOTAL UNIFORM
FOR UNIFORM LOAD IS: FOR LOAD IS BETWEEN

2 supports 1220 lbs. or less 2 supports 1220 lbs. and 2260 lbs.
Example Number 1
3 supports 975 lbs. or less 3 supports 975 lbs. and 1810 lbs.
A total load of 500 lbs. is to be supported in an evenly
distributed manner over a distance of 28 feet with the 4 supports 1665 lbs. or less 4 supports 1665 lbs. and 3080 lbs.
maximum deflection being not greater than 1⁄240 of the
span between the supports.
Which Kindorf® channel should be used and how
many supports are needed? On the chart, find the
Load Distribution on Hanger Rods
point of intersection for a total load of 500 lbs.
and a total run of 28 feet. 2 Supports
Pick the next graph line vertically above this point.
This B-900 or G-975 with 4 supports (4B) evenly
W
⁄2 W
⁄2
spaced. By reading horizontally to the left from this Total
Total uniform load
uniform load -- W
Wlbs.
lbs.
point, it can be seen that up to 565 lbs. can be
supported on B-900, (G-975) under these conditions
and still maintain a deflection of 1⁄240 of the span.
Example Number 2 Example – If the total uniformly distributed load W is 1,000 lbs., each hanger must be capable
Four foot fixtures weighing 30 lbs. each are to be of supporting half of the load or 500 lbs. Therefore, H-193-3/8 or c ‘R’ series hanger rod would
attached to a channel suspended from a ceiling in be sufficient to support this load.
a continuous 20-foot run and maintain a deflection
of less than 1⁄240 of the span between the supports.
Which Kindorf channel should be used and how many
3 Supports
supports are needed? 3
⁄16 W 5
⁄8 W 3
⁄16
Number of fixtures = 20 ft. = 5 fixtures
5 W
8 Total
4 ft./fixture
Total uniform loads - W lbs.
Total Load = 5 fixtures x 30 lbs. = 150 lbs. Total Uniform Load W lbs.
fixture
On the chart, find the point of intersection for a total Uniform Load W lbs.
load of 150 lbs. and a total run of 20 feet. Maximum Safe Load - H-193-3/8 or ʻRʼ Series - 610 lbs.
per hanger rod H-193-1/2 or ʻRʼ Series - 1130 lbs.
Pick the next graph line vertically above this point. This
is B-900-M (G-975-M) with 3 supports (3A) – one Example – If the total uniformly distributed load W is 1,000 lbs., the load is distributed to each
support on each end and one in the center of the run. support in the following manner: 187d lbs. to each end support and 625 lbs. to the center
support. In this case, the maximum load to be supported is 625 lbs., which exceeds the
Example Number 3 recommended safe load of 610 lbs. for H-193-3/8 hanger rod., therefore H-193-1/2,
A 20-foot run of B-901 or G-965 is supported by 3 or d ‘R’ series supports should be used.
hangers, one on each end and one in the center. How
much evenly distributed weight can this system support
and maintain a maximum deflection of 1⁄240 of the span
between the supports? 4 Supports
On the chart, find the point of the intersection for
a total run of 20 feet and the graph line for B-901 2
⁄15 W 11
⁄30 W
11 W
30
11
W 11
30 ⁄30 W 2
W 2
⁄15 W
15
(G-965) with 3 supports (3C).

Total uniform loads - W lbs.
From this point, read horizontally to the left to find the
Total Uniform Loads W lbs.
total uniform load of 690 lbs. on the vertical scale.
Example – If the total uniformly distributed load W is 1,000 lbs., the load is distributed to each
support in the following manner: 133 lbs. to each end support and 367 lbs. to each inner
support. Therefore, H-193-3/8, or c ‘R’ series hanger rod would be sufficient to support this load.
C-90
Kindorf® Channel Bars — Load Deflection Charts

Concentrated Center Loads Uniformly Distributed Loads
LOAD AT DEFLECTION LOAD AT MAX. LOAD AT DEFLECTION LOAD AT MAX.
BEAM 25,000 AT 25,000 DEFLECTION OF BEAM 25,000 AT 25,000 DEFLECTION OF
1 1
SPAN PSI STRESS PSI STRESS ⁄240 SPAN SPAN PSI STRESS PSI STRESS ⁄240 SPAN
CAT. NO. (IN.) (LBS.) (IN.) (LBS.) CAT. NO. (IN.) (LBS.) (LBS.) (LBS.)
6013 55 .038 55 6013 110 .049 110
6014 12 34 .048 34 6014 12 68 .060 57
6029 180 .023 180 6029 361 .029 361

6029-H 175 .024 175 6029-H 350 .030 350
6013 27 .153 18 6013 55 .194 28
6014 24 17 .192 9 6014 24 34 .238 14
6029 89 .093 89 6029 180 .117 154
6029-H 87 .095 87 6029-H 174 .119 146
6013 18 .345 8 6013 36 .437 12
6014 36 11 .433 4 6014 36 22 .536 6
6029 59 .208 42 6029 119 .263 67
6029-H 57 .213 40 6029-H 115 .268 64
6013 13 .615 4 6013 27 .776 6
6014 48 8 .773 2 6014 48 16 .953 3
6029 43 .367 23 6029 88 .467 37
6029-H 42 .375 22 6029-H 86 .477 35
6013 11 .963 2 6013 21 1.213 4
6014 60 6 1.216 1 6014 60 13 1.490 1
6029 34 .550 14 6029 70 .729 22
6029-H 33 .581 13 6029-H 68 .746 21
Loads for lengths greater than 60" spans are available on request. Loads are rounded off to the nearest pound in all cases.
C-91
To Select Proper Channel

End Span Intermediate Span Intermediate Span Intermediate Span
Figure 1 — Long Continuous Run

End Span End Span
Single Span
Figure 2 — Single Span Figure 3 — Double Span
The hanger spacing is often determined by the type of building construction. the applicable deflection constant (from table). This deflection also applies to
The deflection then will determine the proper channel since this deflection the end span in Figure 1 and the single span in Figure 2 if the dimension “C”
should not exceed 1⁄ 240 of the span. is between 1⁄4 and 1⁄3 of the length of the span. If a cantilever does not exist
To estimate the deflection at the center of an intermediate span in long as in the double span (Figure 3), the deflection of end spans (Figure 3) will
continuous runs (Figure 1), multiply the weight of a single fixture times be doubled.
Deflection Constants for Continuous Run, 4-Foot Fixtures*

SPAN B-906 B-900-M B-900 B-901 B-902
FEET G-956 G-975-M G-953 G-975 G-950, G-965 B-900-2A G-955
6 .004 .000 .000 .000 .000 .000 .000
8 .009 .002 .001 .000 .000 .000 .000
10 — .005 .004 .003 .001 .000 .000
12 — .010 .007 .006 .004 .001 .001
14 — — — .012 .007 .002 .002
16 — — — .020 .011 .004 .004
18 — — — — .018 .007 .006
20 — — — — — .010 .009
* For 8-foot fixtures reduce the deflection constant by 50%. This table is for normal weight fixtures — the constant “.000” infers negligible deflection.
A long, continuous run of 30# 4-foot fixtures on G-975 channel is supported on 12' centers. The deflection at the center of an intermediate span will be the deflection constant (.006) times the
fixture weight (30#) or 0.18 inches.
C-92
Suggested Kindorf® Specifications

I. For purposes of designating type and quality for work in this section, B. Channel and Accessories for Surface Raceway Systems.
drawings and specifications are based upon products of standard Fluorescent fixtures, as designated on the drawings and according to the
Kindorf® product drawings. Whenever substitute products are to be fixture schedule, shall be supported and supplied through a combination
considered, supporting technical literature, samples, drawings, and raceway and support system.
certified performance data must be submitted in order to make
a valid comparison of products involved. The cross sectional width dimension of the channel shall be a minimum
of 11⁄2". The depth will be as required to satisfy the load and wire
II. Materials carrying requirements.
Steel channel sections shall be rolled from AISI 1008 commercial grade The supporting channel shall have 1⁄2" diameter knockouts on 6" centers

steel and be in conformance with ASTM A569-72. to accommodate 1⁄2" conduit fittings, and be listed by Underwriters’
Aluminum channel sections shall be extruded from 6063-T6 aluminum Laboratories Inc. as complying with Std. UL-5 for use as surface raceway
alloy and be in conformance with ASTM-B221-80. and support for electric discharge type lighting fixture. The channel must
III. Construction also provide for ground continuity.
A. Channel and Accessories for Support Systems. The combination raceway and support system shall be complete with
channel joiners, end caps, closure strips, hangers, wiring entrance and
The cross sectional width dimension of the channel shall be a minimum all necessary fittings for electrical and mechanical connections.
of 11⁄2". The depth will be as required to satisfy the load requirements.
Channel with 11⁄2" depth or greater shall be rolled from Manufacturing When splicing or joining raceway channel at 90 degree angles, the
Std. 12 gauge steel. Channel smaller than 11⁄2" may be Manufacturing joiners shall be designed such that they are concealed and fastened to
Std. 14 gauge. the inside surface of the channel. Joiners shall be listed by Underwriters’
Laboratories Inc. and allow wires to be directly laid in place.
Attachment holes, when required, shall be factory punched on hole
centers equal to the channel cross sectional width dimension and shall All channel and fittings, including threaded components, shall be
be a maximum of 9⁄16" in diameter. protected against corrosion as outlined in the finish section of
this specification.
Channel attachment nuts shall be designed to prelocate in the channel
and provide a bearing surface on the turned down lips while making Installation of the system shall be in accordance with the National
positive contact with the side walls of the channel. Electrical Code®, NFPA 70 and ANSI C1.
Straps for the support of conduit shall be designed such that the IV. Galv-Krom® Zinc Dichromate Finish
attachment nut is captivated on the shoulder of the strap when The finish on steel components shall consist of a combination of .0005
tightened, and the attachment bolt will allow tightening by either inch electrogalvanizing on steel in accordance with ASTM B633-78 Type
a slot-head screwdriver or wrench. LS coating and a gold zinc dichromate barrier formed on the zinc. This
All nuts, bolts, straps, threaded rod and edges of punched holes coating shall be applied after factory fabrication of the material.
shall be protected with the same finish as the channel as described When tested in accordance with ASTM B117-73 procedure, there shall
in the FINISH section of this specification. be no sign of red rust after 1,000 hours of testing. Certified test results
to support this must be submitted upon request.
C-93
Non-Metallic Channels and Accessories
Channels Channel Simple Beam Loading Table

Kindorf strut is a complete corrosion-proof system, with a comprehensive
®
MAX UNIFORM
1
MAX COLUMN
selection of channels and accessories. Cost-efficient, extremely durable, BEAM LOAD ⁄360 SPAN LOAD
easy to use, and made of the strongest non-metallic materials available. CAT. NO. LBS. DEF (IN.) LBS. DEF (IN.) LBS.
Kindorf : Demanding products for demanding environments.

® 12 inches
NB 900 10 -P 1,430 0.066 723 0.033 3439
• Can’t rust under the • Easy to use, cut and drill NB-900-10-V 1,430 0.066 723 0.033 3439
worst of conditions
• Ideal for a wide variety NB-900-2A-10-P 4231 0.036 3940 0.033 7007
• Cost effective of applications NB-900-2A-10-V 4231 0.036 3940 0.033 7007
• Maintenance free • Unsurpassed reliability 18 inches
NB 900 10 P 953 0.148 321 0.050 3136
NB-900-10-V 953 0.148 321 0.050 3136
NB-900-2A-10-P 2,821 0.081 1751 0.050 6501
NB-900-2A-10-V 2,821 0.081 1751 0.050 6501
24 inches
NB 900 10 P 715 0.264 180 0.067 2778
NB-900-10-V 715 0.264 180 0.067 2778
NB-900-2A-10-P 2,115 0.143 985 0.067 5909
NB-900 NB-900-2A-10-V 2,115 0.143 985 0.067 5909
30 inches
NB 900 10 P 572 0.412 115 0.083 2369
NB-900-2A NB-900-10-V 572 0.412 115 0.083 2369
NB-900-2A-10-P 1,692 0.224 630 0.083 5236
NB-900-2A-10-V 1,692 0.224 630 0.083 5236
LBS.
CAT. NO. DESCRIPTION MATERIAL COLOR WT./100 FT. 36 inches
NB 900 10 P 11⁄2" x 11⁄2" x 10' Polyester Gray 55 NB 900 10 P 476 0.593 80 0.100 1,906
Single Channel NB-900-10-V 476 0.593 80 0.100 1,906
NB-900-10-V 11⁄2" x 11⁄2" x 10' Vinylester Beige 55 NB-900-2A-10-P 1,410 0.322 437 0.100 4,482
Single Channel NB-900-2A-10-V 1,410 0.322 437 0.100 4,482
NB-900-2A-10-P 3" x 11⁄2" x 10' Polyester Gray 110 48 inches
Back-to-Back Channel NB 900 10 P 357 1.055 45 0.133 1,091
NB-900-2A-10-V 3" x 11⁄2" x 10' Vinylester Beige 110 NB-900-10-V 357 1.055 45 0.133 1,091
Back-to-Back Channel NB-900-2A-10-P 1,057 0.573 246 0.133 2,809
NB-900-2A-10-V 1,057 0.573 246 0.133 2,809
60 inches
NB 900 10 P 286 1.648 28 0.167 698
Channel Closure Strip NB-900-10-V 286 1.648 28 0.167 698
NB-900-2A-10-P 846 0.895 157 0.167 1,798
NB-900-2A-10-V 846 0.895 157 0.167 1,798
72 inches
NG-969-5
NB 900 10 P 238 2.373 20 0.200 485
NB-900-10-V 238 2.373 20 0.200 485
NB-900-2A-10-P 705 1.289 109 0.200 1,248
NB-900-2A-10-V 705 1.289 109 0.200 1,248
Deflection in excess of 3.00 inches; midspan support is recommended.
Table lists the total allowable load for various simple spans based on a minimum
safety factor of 3:1.
All beams should be supported in a manner to prevent rotation at

LBS. supports. For beams longer than 72 inches, contact manufacturer’s
CAT. NO. DESCRIPTION MATERIAL COLOR WT./100 FT.
engineering department. Recommend sealing ends of channel with
NG-969-5 Standard Length 5' Rigid PVC Dark gray 20 sealant after cutting.
C-94
Pipe Clamps Fittings 4 7⁄8"
• Polyester and Vinylester Kindorf ®
fittings are suited for use with all

11⁄2" and 15⁄8" channels
3 1⁄4"
• Kindorf® fittings are manufactured
from 3⁄16" flat material
• Consult the Chemical Compatibility NB-936-P
Chart to ensure material will withstand NB-936-V
the specific chemical environment

CONDUIT/PIPE STYLE RECOMMENDED • All holes in Kindorf® fittings 4 7⁄8"
NOMINAL PVC PVC COATED TORQUE DESIGN WT. are 13⁄32" in diameter
CAT. NO. IN. SCH. 80 RIGID METAL (TYP.) IN LBS. LOAD* LBS./100
NC-105-1/2 ⁄2
1
.840 .840 .920 5 100 4
NC-105-3/4 ⁄4
3
1.050 1.050 1.130 5 100 4 4 7⁄8"
NC-105-1 1 1.315 1.315 1.395 5 200 4.8
NC-105-1 1/4 — — — — — — —
NC-105-1 1/2 11⁄ 2 1.900 1.900 1.980 5 200 6.4
NB-944
NC-105-2 2 2.375 2.375 2.455 5 200 8
NC-105-3 3 3.500 3.500 3.580 20 300 10
4 7⁄8" 47⁄8"
NC-105-4 4 4.500 4.500 4.580 20 300 10 3 1⁄4"
NC-105-6 6 6.625 6.625 6.705 20 300 16.3
* Design load is based on pullout values with a 3:1 factor of safety.
Material: Polyurethane.
47⁄8" 3 1⁄4"
Color: Gray.
NB-935-P NB-947 NB-931

Clevis Hangers NB-935-V
4 7⁄ 8"
61⁄ 2"
4"
3 1⁄4"
(A) (B) (C) NB-937-P NB-949-P

NOMINAL MAX DIMENSION HANGER MAXIMUM WT. NB-937-V NB-949-V NB-918
CAT. NO. DIAMETER PIPE OD HEIGHT ROD SIZE LOAD LBS./100
NC-149-1 1 11⁄2 2 3⁄4 1
⁄2 60 20.8
NC-149-1 1/2 11⁄2 2 31⁄2 1
⁄2 60 24
NC-149-2 2 2 5⁄8 4 3⁄4 1
⁄2 90 38
NC-149-2 1/2 2 1⁄2 3 1⁄4 5 1⁄2 1
⁄2 120 40 WT
NC-149-3 3 3 7⁄8 7 5
⁄8 160 62.5 CAT. NO. MATERIAL COLOR LBS./100 3"
NC-149-4 4 5 1⁄8 8 1⁄2 5
⁄8 250 88
NB-935-P Polyester Gray 13 5" 5"
NC-149-6 6 7 1⁄8 10 7⁄ 8 5
⁄8 400 170
NB-935-V Vinylester Beige 13
NC-149-8 8 9 1⁄4 14 5
⁄8 450 250 NB-924
NB-931 Polyurethane Gray 14
NC-149-10 10 11 3⁄8 18 5
⁄8 500 400
NB-947 Polyurethane Gray 24
NC-149-12 12 13 1⁄2 21 1⁄2 5
⁄8 600 550
NB-949-P Polyester Gray 22
NC-149-14 14 15 3⁄4 24 1⁄2 3
⁄4 700 700
NC-149-16 16 18 27 3⁄8 3
⁄4 800 1,150
NB-936-V Vinylester Beige 28
NC-149-19 19 21 34 1⁄4 3
⁄4 900 1,700
Design loads given are in pounds at 70°F with a 3:1 factor of safety. NB-924 Polyurethane Gray 56 3"
Insulate hangers from pipe at higher temperatures NB-944 Polyurethane Gray 34 6 5⁄8" 5"
Material: Polyester NB-925 Polyurethane Gray 70
Color: Yellow and Gray NB-918 Polyurethane Gray 4.6 NB-925
C-95
Channel Nuts Channel Washers

THREAD MAXIMUM MAXIMUM WT. SIZE WT.
CAT. NO. SIZE (IN.) LOAD/LBS. TORQUE/LBS. LBS./100 CAT. NO. (IN.) LBS./100
NB-910-3/8 3
⁄8 450 35 1.8 NH-119-C 3
⁄8 4
NB-910-3/8 HD 3
⁄8 1,370 100 2.6 NH-119-D 1
⁄2 3.6
NB-910-1/2 1
⁄2 450 40 1.8 NH-119-E 5
⁄8 3.6
NB-910-1/2 HD 1
⁄2 1,500 130 5.2 Material: Glass fiber reinforced polyurethane.
3:1 Factor of Safety. Color: Gray.
Material: Glass fiber reinforced polyurethane.
Color: Gray. Flat Washers
SIZE WT.
Hex Nuts CAT. NO. (IN.) LBS./100
SIZE MAXIMUM MAXIMUM WT. NH-117-C 3

⁄8 .6
CAT. NO. (IN.) LOAD/LBS. TORQUE/LBS. LBS./100 NH-117-D 1
⁄2 .6
NH-114C 3
⁄8 465 50 .33 NH-117-E 5
⁄8 .8
NH-114-D 1
⁄2 830 125 .8 Material: Rigid PVC.
Color: Gray. Threaded Rod
THREAD MAXIMUM WT.
Square Nuts CAT. NO. SIZE SHEAR/LBS. TORQUE/LBS. LBS./100
SIZE THREAD MAX. WT. NH-193-3/8-4 3⁄8" x 4' 300 30 7.0

CAT. NO. (IN.) SHEAR/LBS. TORQUE/LBS. LBS./100 NH-193-1/2-4 1⁄2" x 4' 510 80 12
NH-116C 3
⁄8 1,300 125 1.8 NH-193-5/8-4 5⁄8" x 4' 1,600 200 18
NH-116-D 1
⁄2 1,600 200 2.8 3:1 Factor of Safety.
NH-116-E 5
⁄8 1,600 200 5.6 Material: Vinylester.
Material: Vinylester.
Color: Gray. Rod Couplers
SIZE MAXIMUM WT.
Hex Head Bolts CAT. NO. (IN.) LOAD/LBS. LBS./100
SIZE MAXIMUM MAXIMUM WT.

NH-195-3/8 3
⁄8 880 6.4
CAT. NO. (IN.) LOAD/LBS. TORQUE/LBS. LBS./100 NH-195-1/2 1
⁄2 1,000 6.4
NH-195-5/8 5
⁄8 1,700 13.2
NH-113-P 3
⁄8 x 11⁄4 360 30 1.4
NH-113-U 3
⁄8 x 21⁄2 360 30 2 3:1 Factor of Safety.
NH-113C* 1
⁄2 x 11⁄4 600 90 1.4 Material: Glass fiber reinforced polyurethane.
NH-113-H* 1
⁄2 x 21⁄2 600 90 2 Color: Gray.
3:1 Factor of Safety.
Color: Gray. Channel to Beam Clamp Assembly
* With molded washer.
STD. WT. MAXIMUM
CAT. NO. (LBS.) LOAD/LBS.
NE-763-3/8 110 200
Channel Reinforcement Spacer NE-763-1/2 120 200
CAT. NO. HOLE SIZE (IN.) WT. LBS./100 Kit consists of:
NB-950 ⁄8–1⁄2
3
1.6 DESCRIPTION STD. CTN. MATERIAL COLOR
Material: Polyurethane Channel Nuts 4 Polyurethane Gray
Color: Gray Clips (set) 2 Vinylester Beige
Bolts 4 Polyurethane Gray
C-96
Kindorf ® Brush-On Kindorf ® Spray-On

Fiberglass End Sealant Fiberglass End Sealant
When fabricating Type “P” or “V” Series materials, Kindorf® Spray-On Fiberglass End Sealant provides
Kindorf® Fiberglass End Sealant should be used. a quick and easy corrosion-resistant coating when applied
After cutting or drilling the channel, interior glass fibers to fiberglass channel and accessories. Kindorf® Spray-On
may fray and lose strength due to exposure to the Fiberglass End Sealant is a rubberized spray which is
environment. Kindorf® sealant protects the exposed glass supplied in a 12 oz. pressurized can.
fibers and prevents deterioration. Kindorf® sealant
exceeds Vinylester (V) material in corrosion resistance.

WT. WT.
CAT. NO. DESCRIPTION SIZE LBS./100 CAT. NO. DESCRIPTION SIZE LBS./100
NH-600 Brush-on sealant 1 qt. 220 NH-601 Spray-on sealant 12 oz. 100
Chemical Resistance
POLYESTER VINYLESTER RIGID PVC POLYURETHANE POLYESTER VINYLESTER RIGID PVC POLYURETHANE
CHEMICAL 70°F 160°F 70°F 160°F 70°F 160°F 70°F 160°F CHEMICAL 70°F 160°F 70°F 160°F 70°F 160°F 70°F 160°F
Acetic Acid, <50% • • • • † † • — Gasoline, Aviation • † • • — — — —
Acetone, <10% † † † † — — — — Hydrochloric Acid, <37%• † • • • • • —
Aluminum Hydroxide • • • • — — — — Hydroflouric Acid, <20% † † • 100° • † — —
Ammonium Hydroxide, † † • 150° • • • — Hydrogen Chloride, Wet Gas • † • • — — — —
<20% Hydrogen Sulfide, Wet Gas • † • • • • — —
Ammonium Nitrate • • • • — — — — Lactic Acid • † • • • • • —
Ammonium Phosphate • • • • — — — — Nickel Sulfate, low pH † † • • — — — —
Benzene • • † † — — — — Nickel Sulfate, high pH † † • • — — — —
Benzoic Acid • • • • • • • — Nitric Acid, <35% † † • 120° • • • —
Bromine, Wet Gas † † • 100° • † — — Perchloric Acid, <10% † † • 150° — — — —
Butylene Glycol • • • • — — — — Phosphoric Acid • • • • • • • —
Butyric Acid, <50% • • • • — — — — Potassium Chloride • • • • • • • —
Chlorine, Dry Gas • • • • — — — — Potassium Nitrate • • • • — — — —
Chlorine, Wet Gas † † • • — — — — Potassium Persulfate † † • • — — — —
Chlorine, Liquid † † † † — — — — Sodium Hydroxide, <50% † † • 180° • • • —
Chlorine, Water • • • • • • • — Sodium Hypochlorite, <15% † † • 150° • • • —
Chromic Acid, <5% † † • • — — — — Sodium Nitrate • • • • — — — —
Copper Chloride • • • • • • • — Sodium Sulfate • † • • — — — —
Copper Cyanide • • • • • • • — Sodium Sulfide † † • • • • • —
Copper Nitrate • • • • — — — — Sulfuric Acid, <70% † † • • • • • —
Copper Sulfate • • • • • • • — Sulfuric Acid >70% † † • 102° † † — —
Esters, Fatty Acids • • • • — — — — Trisodium Phosphate † † • • • • • —
Ferric Chloride • • • • • • — — Urea • † • 150° — — — —
Ferrous Chloride • • • • — — — — Vegetable Oils • • • • — — — —
Fluoboric Acid • 120° • • • • • — Vinegar • • • • — — — —
Fluosilicic Acid, <32% † † • 100° — — — — White Liquor — — • • • • • —
Formic Acid, <50% † † • 100° † † • —
Type operating ranges for:

• Recommended for use
Polyester -30° F–150° F
° Recommended up to temperature indicated
Vinylester -35° F–200° F
† Not recommended for use
Polyurethane -40° F–130° F
— No information available at this time
Nylon -20° F–150° F
NOTE: The guidelines presented in this table assume the typical application of Kindorf® products where exposure is limited to fumes, vapors, and occasional splashes from chemicals. This
information is intended as a guideline and does not guarantee product performance for the applications listed. In special situations where chemical resistance is critical, the factory should be
consulted. Some applications may require a screening test of samples in the chemical environment of interest. The user is advised to determine suitability of the product for its particular use.
Class I fire rated per ASTM E-84 and are UL-94 V-0.
C-97
Right Angle Slotted Angle
With Right Angle, you get Flexibility —

Simplicity — Economy!
Create the support framing you need.

Right Angle is manufactured from commercia-quality steel in three different sizes. The small
sizes are 14-ga. steel, the larger size is 12-ga. steel. With this offering, an endless variety
of metal framing requirements can be met, from lightweight supporting needs to larger
shelving for inventory storage.
One of the legs on all sizes is 1 5⁄8" wide, while the other is either 1 5⁄8", 2 3⁄ 8" or 3 1⁄8" long.
Depending on the frame requirements, a single size can be utilized throughout, or the sizes
can be interchanged to get the most efficient usage from the material.
This book will serve as a guide to plan and build your structure.
Installation time is reduced — inventory space is minimal.

Scribe marks are placed every 3⁄4" which saves planning, layout and cutting time and assures accuracy.
The exclusive slot and hole pattern, repeated every 3", is scientifically designed for ease of assembly and rigidity. No welding is necessary, no holes to drill.
A 9⁄16" wrench is the only tool required for assembly. The proper nuts and bolts are included with the material to ensure fast and easy erection.
Right Angle Metal Framing is packaged in 10' and 12' lengths to minimize cut offs and ensure maximum use of material.
120' (10 x 12' lengths) of Right Angle takes up the same amount of space as one 2 x 4. A standard package includes five pieces to a bundle,
therefore handling and storage space are significantly reduced.
The importance of cutting Right Angle easily, quickly and accurately is the key to time saving assembly. The Steel City® Portable Cutter provides
these advantages and make layout and erection of any structure a “light-work” job.
Kindorf® Right Angle comes standard with our Galv-Krom® Finish,

which ensures a long-lasting, durable installation.
The Galv-Krom® finish is a two-part finishing process that protects the entire system, including all nuts
and bolts. The first part of the finish is electro-galvanized zinc that covers the bare steel. The second part
is a gold zinc dichromate that is applied over the zinc base.
Three aspects of the Galv-Krom® process are worthy of note:
1. Zinc Coating — In the first 2. Electrogalvanizing — 3. Trivalent Gold Chromate

part of the Galv-Krom® process, Because the zinc is applied Barrier — The second part of
a .5 mil coating of zinc is placed through a temperature-controlled the Galv-Krom® finish is a gold
on the bare steel. This assures electrolytic process, a cohesive zinc dichromate that is applied
the sacrificial quality of any bond with the steel is assured. over the zinc base. This second
galvanizing and becomes a This prohibits chipping or peeling. layer of plating forms a non-
working finish. The zinc literally It also distributes the zinc porous barrier which protects
sacrifices itself over bare steel evenly so all components — the underlying zinc and adds
and protects cut edges or including threads — can be additional resistance to corrosion.
scratches which may occur equally protected. In addition, the gold zinc
during construction. dichromate covering provides
Galv-Krom® is in compliance with an excellent base if the surface
ASTM B633-78 Type II coating. is to be painted.
C-98
Type RA-160 Slotted Angle

• 15⁄8" x 15⁄8" x .080" (14 gauge)
• Designed for light-duty applications where extra
strength is not a requirement
• Ideal material for light racking and shelving
• Packaged in five 10-ft. or 12-ft. lengths complete 1 5⁄ 8"
with thirty-six 3⁄8" x 5⁄8" long hex head bolts and nuts 7
⁄ 8"
1 5⁄ 8"

• Standard package 10' lengths: 39 lbs., 12' lengths: 48 lbs. 3
⁄ 4" 3⁄ 4"
3"
7
⁄ 8"
CAT. NO. LENGTH FT. PER PKG. WT. PER 100 FT.
RA-160-10 10 ft. 50 75 lbs.
RA-160-12 12 ft. 60 75 lbs.
Type RA-225 — For Heavy-Duty

• 23⁄8" x 15⁄8" x .080" (14 gauge)
• Wide range versatility for nearly every type of framing
• Well suited for electrical applications
• Slot-and-hole pattern provides ready-made anchoring points
for panel-board framing and fixtures of all kinds 3
⁄4 2 3⁄8"
• Packaged in five 10-ft. or 12-ft. lengths complete 1
⁄8
with thirty-six 3⁄8" x 5⁄8" long hex head bolts and nuts 3
⁄4 3
⁄4
• Standard package 10' lengths: 48 lbs., 12' lengths: 56 lbs. 3 15⁄8"
7
⁄8
RA-225-10 10 ft. 50 93 lbs.
RA-225-12 12 ft. 60 93 lbs.
Type RA-300 —
For Extra Heavy-Duty
• 31⁄8" x 15⁄8" x .104" (12 gauge)
• Used where heavy loads are involved
• Racks and shelving for heavy material and large
structures such as ramps and balconies are typical uses
3 1⁄ 8
• Packaged in five 10-ft. or 12-ft. lengths complete
with thirty-six 3⁄8" x 3⁄4" long hex head bolts and nuts
• Standard package 10' lengths: 72 lbs., 12' lengths: 84 lbs. 1 5⁄ 8
3
⁄8
7
RA 300 10 10 ft. 50 135 lbs.
RA-300-12 12 ft. 60 135 lbs.
C-99
Nuts Serrated — For Self-Locking Helpful Hints to Maximize

• 100 sets per package
• No. RA-BN-5⁄8, 3⁄8"–16 x 5⁄8"
Right Angle Erection.
long for RA-160 and RA-225 Slot and Hole Pattern
• No. RA-BN-3⁄4, 3⁄8"–16 x 3⁄4" 3

⁄ 8"–16 x ⁄ 8"
5 The Right Angle hole pattern is simple and flexible. It is repeated every
long for RA-300 3" along the entire length of the Right Angle. An extended line marks the
• A 9⁄16" wrench is only tool 3" increments, (vertical slots), while shorter lines mark every 3⁄4" increment.
A 9⁄ 16" wrench is
needed for assembly only tool needed
With this hole pattern, nesting, triangulation, cross beams and many
for assembly. additional combinations are possible.
3
⁄ 8"–16 x 3⁄ 4"
CAT. NO. STD. CTN. WEIGHT PER 100 SETS

RA BN 5/8 100 4 lbs., 3⁄8"–16 x 5⁄8"
RA BN 3/4 100 5 lbs., 3⁄8"–16 x 3⁄4"
Gusset Plate
• Three hole connector for Triangulation Cross Beams
extra rigid angle assembly
• For use with all three types
of right angle
• Galvanized steel
For proper assembly, insert plate between the angle flanges for 3-bolt connection.
Nesting
CAT. NO. STD. CTN. WEIGHT PER 100 SETS
RA GP 25 10 Cleat Sections
Cut Off Cleats are small sections of Right Angle used to reinforce joints
or used as feet to support vertical columns. These feet prevent damage
Portable Cutter to floor surfaces or can be used to bolt a structure to the floor.
• Designed for use with all three types Additional joints can be made using cut off cleats. Simply butt the cleat
of slotted angle against a column and behind a right side beam, as shown in the illustration.
• Cuts with single stroke of handle
• Produces clean, burr-free cuts
CAT. NO. STD. CTN. WEIGHT EACH

RA C 1 17
Rigid and Swivel Casters Cleat Cleat

• Hard rubber composition
• 31⁄2" diameter with load rating
of 225 lbs. per wheel
• Plate has 13⁄32" diameter holes RA-RC RA-SC
for mounting on all Rigid Center Swivel Caster
three types of slotted angle
CAT. NO. STD. CTN. WEIGHT EACH

RA RC 2 2
RA SC 2 3
C-100
When a beam rests on a ledge of other material (such as a wall) the long flange should extend upward. Right Angle
beams are at their strongest when assembled with long flange downward. Vertical columns may be in either
direction. Place short flange of vertical column in front for shelving to permit wider opening for handling material.
Variety of Combinations to Meet Needs

Greater strength is obtained by joining sections of Right Angle in various combinations for beams and columns.
See the load charts on page C-99 for the combination that best suits your need.

Procedure for Laying Out Structure.
Measure the Space
Right Angle structures may be built
to the size of the space available. 12'–0"
Measure the space and make
3'
a sketch of the area.
Sketch the Planned Structure "

3' 4'–6 4'–10"
Sketch the structure you plan to build
listing all vital dimensions. Include 3'
length, width and height of all sections 3' 9'–4"
so that load limits can be calculated 24" 12"
safely. 15'–0"
3'
4'
Plan View
Plan Flange Direction
Right Angle beams are at their strongest position with the long flange
downward. Vertical uprights may be in either direction for equal strength.
Be sure to measure the material to be shelved to allow space for
handling. Your sketch will also be used as a cutting and assembly plan.
Assembling the Structure

Follow your plan for cutting sections and for layout. Assemble the structure as a series of frames,
or bays and bolt together as units. Use as many bolts as possible and turn nuts up finger-tight.
Square-up and level the entire structure. Proceed to tighten bolts with wrench, starting with corners
to assure permanent squareness. Use diagonal bracing, if necessary. Add shelves. Your Right Angle
structure is ready for a useful lifetime.
Erect vertical frames into bays.

Bolt bays together.
C-101
Figure Load Limits How to Determine Weight to Be Supported

Figure the load your structure must bear on each level or shelf. This Multiple-bay shelving is typical of many Right Angle weight-bearing
is necessary to determine the sections required to carry the load safely. structures. Load tables are your guide to the weights supportable by
RA-160, RA-225 and RA-300. Strengths are increased where needed
The load tables will enable you to determine the Right Angle gauge and
by combining sections for beams or columns, and by adding braces.

section combination needed.
Example for Checking Load Safety
Load Limit Example for Evenly Distributed Loads
This structure is erected as 3 separate bays and bolted together,
Using the sketch shown and the load tables, calculate the weight
using RA-225.
supportable by a structure with two or more shelves. A 6-ft. high single
shelf structure AB will support a load of 5,200 lbs. using RA-225 Right
Angle (4 single uprights x 1,100 lbs. each) from table. Beam Load Bearing
When an additional shelf is framed at C, columns become the same as two Load E = 400 lbs. evenly distributed on two 4' beams. Refer to beam load
3-ft. uprights, AC and CB, and the total safe load is 10,200 lbs. on columns tables for RA-225: Two 4' beams will support 1,090 lbs. — safe load.
CB (4 x 2,550 lbs.). This load can be divided between the shelves in any Load F = 600 lbs. on solid shelf evenly distributes weight to two 3' beams.
convenient way, so long as the total load on columns CB does not exceed Refer to beam load tables: Two 3' beams will support 1,560 lbs. — safe load.
10,200 lbs. If shelf loads are unequal, the heavier load should go on the
Load G = 800 lbs. on shelf supported by two 3' beams and two 4' beams.
lower shelf to avoid top-heavy instability.
Add the 4 sections: 3 + 3 + 4 + 4 = 14 ft. Divide total load G by 14, i.e.,
Use the same method of calculating for three or more shelves 800 ÷ 14 = 57 lbs. per ft.
with the load tables as reference.
Compute wt. on longest beam — two 4' sections, or 8 ft. Multiply 8' x 57 lbs.
per ft. load = 456 lbs. supported by the two 4' beam. Refer to load tables:
Two 4' beams support 1,090 lbs. — safe load. Since the 3' beams are
A A stronger, they are also safe for the load. Load H, any load on shelf supported
3'
by beams at floor level — considered safe.
6' The example illustrates methods of figuring loads on three different types
C
3' of shelf construction. It is not a typical bay.
B B It should be remembered that a safe beam load does not assure a safe
structure — column load safety must also be computed.
Load E 400 lbs. Column Load Bearing

A Four columns support load equally. Column section AB = b load E, or 100 lbs.
Column section BC = b load F, or 150 lbs., PLUS b load E, 100 lbs. or 250 lbs.
3'
Column section CD = b load G, or 200 lbs. PLUS 150 lbs., b load F, PLUS
Load F 600 lbs. 100 lbs., b load E, for a total load on section CD of 450 lbs. Load H is at
B floor level, does not count.
Assuming a 9' high structure, the 9' column is supported at 3' intervals
3' by ties for shelving, the 3' column section data is used. Refer to column
Load G 800 lbs.
load tables: 3 column (vertical) supports 2,550 lbs. — safe for the load.
Figures are for a free-standing, unbraced structure. Common uprights
C
in two or more bay structures carry a double load.
See page C-99 for load tables.
3'
Load H 1000 lbs.
D
4'
3'
Multiple Bay Shelving
Single Section T-Section
C-102
Column Loads
RA 160 — 14 ga. x 1 5⁄8" x 1 5⁄8" RA 300 — 12 ga. x 3 1⁄8" x 1 5⁄8"
T-SECTION SINGLE SECTION T-SECTION SINGLE SECTION
3' 3,880 1,500 3' 8,000 3,500
4' 3,500 1,200 4' 7,100 2,900
5' 3,000 950 5' 6,300 2,400
6' 2,500 750 6' 5,550 1,800
7' 4,750 1,300

8' 4,000 1,000
9' 3,200 —
10' 2,400 —
NOTE: Values shown are static loads (lbs.) applied vertically to an unbraced column. Min.
safety factor 2.1. To increase load capacity columns can be reinforced with side braces cut
to size.
Single Section
Broad Channels
RA 225 — 14 ga. x 2 3⁄ 8" x 1 5⁄8" Beam Loads

T-SECTION SINGLE SECTION BROAD NARROW SINGLE
CHANNEL CHANNEL SECTION
3' 5,550 2,550
4' 5,050 1,900 3' 2,550 1,490 770
5' 4,400 1,550 4' 1,780 1,040 530
6' 3,850 1,300 5' 1,330 770 400
7' 3,400 970 6' 1,030 600 310
8' 3,000 — 7' 820 470 240
9' 2,650 — 8' 590 380 —
10' 2,300 — 9' 420 310 —
10' 310 230 —
3' 4,110 3,050 1,560
4' 2,870 2,130 1,090
5' 2,140 1,580 810
6' 1,660 1,230 630
7' 1,330 980 500
8' 1,080 790 410
9' 890 650 330
10' 720 540 280
3' 7,570 6,300 3,220
4' 5,290 4,400 2,250
Narrow Channel 5' 3,950 3,280 1,680
6' 3,060 2,540 1,300
7' 2,440 2,020 1,040
8' 1,990 1,650 840
9' 1,650 1,360 690
10' 1,380 1,140 580
NOTE: Values shown are for a pair of beams supporting an evenly distributed load (lbs.).
For a concentrated load these values should be halved. Min. safety factor 1.4. Multiple
angle beams should be bolted every 6 in. with bolts staggered in alternate rows.
To increase load capacity tie angles can be cut to size and bolted between beams.
C-103
Handle Retro-Fit Trapeze Applications with Ease!
The innovative Kindorf® Trap-Eze™
Connector changes a time-consuming
retro-fit trapeze application into a
streamlined process. Using a Kindorf®
Trapnut® Strut Fastener, the new
Trap-Eze™ Connector can be easily
Trap-Eze™™ installed above or to the side of an
existing assembly, eliminating the
Connector need to disassemble and reassemble
the trapeze. It is designed for use with
shorter strut lengths that can vary in
length by as much as an inch, so the
strut can be rough cut versus labor-
intense precision cut.
Easily installs
above existing Unique safety slot maintains bracket position
on threaded rod and prevents disengagement
trapeze. of the trapeze system.
Can be used to
extend existing
trapeze.
Designed for use

with the innovative View window provides strut length safety zone
for rough cuts versus precision cuts.
Kindorf® Trapnut®
Strut Fastener.
See page C-70 for
more information
C-104

T&B Unistrud PDF

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

T&B Unistrud PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

T&B Unistrud PDF

Uploaded by

Copyright:

Available Formats

In This Section…

Kindorf® Modular Metal Framing and Support System

Modular Metal Framing and Support System

Kindorf® Channel Compatibility with 15⁄8" Strut

10 ft. and 20 ft. lengths

Saves You Labor Dollars Channel

Modular Metal Framing and Support System

1. The Entire Section Can be Used.

3. Field Cutting and Layout Made Simple.

Let the Modular 11⁄2" Dimension Work for You by Saving

Saves You Inventory Dollars

One Kindorf® B-915

One Kindorf® B-916

One Kindorf® B-917

Galv-Krom® Electro-Galvanized Finish

about hexavalent chromium in the metal framing industry. Many of these

Modular Metal Framing and Support System

• Occupational Exposure Limit — The changes related to

Galv-Krom ® Electro-Galvanized Finish (continued)

• Superior Corrosion Protection — One hallmark of the 1100

Modular Metal Framing and Support System

5. Hot-Dipped Galvanized (Suffix HD) Warning

6. PVC Coated (Prefix P)

Solid Base Half-Slot Base

B-905HS (12 ga.)

Bolt Hole Base

Kindorf® Channels — How To Order

Modular Metal Framing and Support System

CAT. NO. DESCRIPTION MATERIAL CAT. NO. DESCRIPTION MATERIAL

Connection by means of continuous slot.

CAT. NO. DESCRIPTION JOINER END CAP

CAT. NO. DESCRIPTION MATERIAL B-903 12 ga. Galv-Krom® G978-D —

CAT. NO. DESCRIPTION MATERIAL

Connections by means of continuous

Modular Metal Framing and Support System

CAT. NO. DESCRIPTION CAT. NO. DESCRIPTION MATERIAL

Connection by means of continuous slot. Connection by means of continuous slot

0.155 0.179 0.545 0.2 0.259 0.619

CAT. NO. DESCRIPTION MATERIAL

B-907HS Channel — 11⁄2" x 3⁄4"

Modular Metal Framing and Support System

CAT. NO. DESCRIPTION MATERIAL CAT. NO. DESCRIPTION MATERIAL

Channel Nuts Trapnut® Strut Fastener

Kindorf® self-aligning channel nuts are designed to provide resistance to pull

SIZE DESIGN STD.

Channel Nuts — Standard Finish:

Load Ratings for B-910 Strut Nuts

B-911 Series B-914 Series

Modular Metal Framing and Support System

CAT. NO. SIZE (IN.) THICKNESS (IN.) WT. LBS./C

B-915 Two-Hole Angle Connector B-917 Five-Hole Angle Connector

Can also be used as side-beam connector to suspend 1⁄ 2" hanger rod.

CAT. NO. FINISH CAT. NO. FINISH

B-916 Three-Hole Angle Connector B-918 Left-Hand Gusset Connector

as side beam 4 1⁄ 2 41⁄2" 41⁄2"

CAT. NO. FINISH CAT. NO. FINISH

B-919 Right-Hand Gusset Connector B-921 Two-Side 11⁄ 2" 1 ⁄ 2"