ASME B16.

5-2013

Table II-2-1.1 Pressure–Temperature Ratings for Group 1.1 Materials

Nominal
Designation Forgings Castings Plates

C Si A105 (1) A216 Gr. WCB (1) A515 Gr. 70 (1)

C Mn Si A350 Gr. LF2 (1) ... A516 Gr. 70 (1), (2)
A537 Cl. 1 (4)

C Mn Si V A350 Gr. LF6 Cl. 1 (3) ... ...

1
3 ⁄2Ni A350 Gr. LF 3 ... ...
Working Pressures by Classes, psig
Class
Temp., °F 150 300 400 600 900 1500 2500

20 to 100 285 740 985 1,480 2,220 3,705 6,170

200 260 680 905 1,360 2,035 3,395 5,655
300 230 655 870 1,310 1,965 3,270 5,450
400 200 635 845 1,265 1,900 3,170 5,280
500 170 605 805 1,205 1,810 3,015 5,025

600 140 570 755 1,135 1,705 2,840 4,730

650 125 550 730 1,100 1,650 2,745 4,575
700 110 530 710 1,060 1,590 2,655 4,425
750 95 505 675 1,015 1,520 2,535 4,230
800 80 410 550 825 1,235 2,055 3,430
850 65 320 425 640 955 1,595 2,655
900 50 230 305 460 690 1,150 1,915
950 35 135 185 275 410 685 1,145
1,000 20 85 115 170 255 430 715

NOTES:
(1) Upon prolonged exposure to temperatures above 800°F, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 800°F.
(2) Not to be used over 850°F.
(3) Not to be used over 500°F.
(4) Not to be used over 700°F.

111
c