ISSN : 2394-2975 (Online) International Journal of Advanced Research

ISSN : 2394-6814 (Print) Vol. 1, Issue 1 (July - Sept. 2014) in Education Technology (IJARET)

Experimental Study on Usage of Egg Shell as Partial

Replacement for Sand in Concrete
I
J.Karthick, IIR.Jeyanthi, IIIM.Petchiyammal
I,II,III
Dept. of Civil Engineering, Sree Sowdambika College of Engineering, Aruppukottai, Virudhunagar,
Tamil Nadu, India
I
[email protected], II [email protected], III [email protected]

Abstract
Through out the world, concrete is being widely used for the construction of most of the buildings,bridges etc.Hence, it has been
properly labeled as the backbone to the infrastructure development of a nation.To meet out this rapid infrastructure development a
huge quantity of concrete is required. Unfortunately,India a is not self sufficient in the production of cement ,the main ingredient of
concrete and the demand for exceed the supply and makes the construction activities very costlier. Hence currently the entire construction
industry is in search of a suitable and effective the waste product that would considerably minimize the use of ultimately reduces the
construction cost. Few of such products have already been indentified like Rice Husk, flyash, Silica Fumes, Egg shell etc. Among
these and egg shells are known to have good prospects in minimizing the usage of sand. So, in our concept of the project is replacing
the fine aggregate by egg shell, and also reduce the weight of the concrete with achieve the required strength of concrete.

Keywords
Concrete, Characterization, Eggshell (ES).

I. Introduction 2. Meets the most stringent environmental regulations

These materials are majority by products from other processes or nationwide.
natural materials. The major benefits of rice husk and egg shell 3. Ideal for painting in occupied spaces.
is its ability to replace certain amount of fine aggregate and still 4. Excellent durability and washable finish.
able to display fine aggregate property, thus reducing the weight 5. Resist mold and mildew on the paint film.
of concrete. The use of such by products in concrete construction 6. Saves money; less material required.
not only prevents these products from being land-filled but also 7. Meets strict performance and aesthetic requirements.
enhances the properties of concrete in the fresh and hardened
states. B. Application of Egg Shell:
• Concrete/Masonry Block.
II. Egg Shell • Plaster; Ferrous Metal.
Eggshell is generally thrown away as a waste. The egg shell also • Wood.
creates some allergies when kept for a longer time in garbage. • Gypsum Wallboard-Drywall. Road Pavements.
Disposal is a problem. It creates undesirable smell which can cause
irritation. The main ingredient in eggshells is calcium carbonate III. Results and Discussion
(the same brittle white stuff that chalk, limestone, cave stalactites,
sea shells, coral, and pearls are made of). The shell itself is about A. Properties of the coarse aggregate:
95% CaCO3 (which is also the main ingredient in sea shells). The The properties of aggregate are found in the concrete engineering
remaining 5% includes Magnesium, Aluminum, Phosphorous, laboratory and find the values below,
Sodium, Potassium, Zinc, Iron, Copper, Ironic acid and Silica
acid. Eggshell has a cellulosic structure and contains amino acids; Table 2: Specific Gravity
thus, it is expected to be a good bio-sorbent and it was reported Materials Specific gravity
that large amounts of eggshells are produced in some countries,
Coarse aggregate(20mm) 2.8
as waste products and disposed in landfills annually.
Water absorption 0.3%
Table 1: Physical Properties of Egg Shell Impact value 6.15%
Name Physical Properties Attrition test 1.67%
Specific Gravity 0.85 Cursing value test 15.55%
Moisture content 1.18 Bulk density 1027kg/m3
Bulk Density (g/m3) 0.8
Particle Density (g/m3) 1.012 B. Split Tensile Strength
We are preparing the M25mix design with the help of properties
Porosity (%) 22.4 BET
of their materials.Then, we are replacing the Egg shell up to 10%,
Surface area m2/g 21.2 20%, 30%, 40% & 50%.For each and every proportion, we are
making the 3coulmns.After making that concrete structures are
A. Advantages of egg shell immersed in water. After we are testing the columns at 7day, 14day
1. Considerable reduction in alkali-silica and sulfate &28 days. Before testing the columns all are weighted. Tensile
expansions. strength was calculated for the all proportion of columns by using

www.ijaret.com 7 © IJARET All Rights Reserved

International Journal of Advanced Research ISSN : 2394-2975 (Online)
in Eduation Technology (IJARET) Vol. 1, Issue 1 (July - Sept. 2014) ISSN : 2394-6814 (Print)

tensile strength formula with help of their resisting loads.

Fig.1 : Split Tensile Strength

Fig. 3 : Compression Test
Table 3: Split Tensile Strength
ES added % 7 days N/ 14 days N/ 28 days N/ Table 4 : Compression Strength
mm2 mm2 mm2 ESadded % 7 days N/ 14 days N/ 28 days N/
0 0.62 1.34 2.36 mm2 mm2 mm2
10 0.94 1.5 1.76 0 14.97 22.03 24
20 0.72 1.06 1.43 10 13.78 20.11 22.33
30 0.37 0.49 1.2 20 15.33 22.33 24.32
40 0.34 0.42 0.99 30 14.21 16.89 21.42
50 0.14 0.16 0.21 40 8.78 9.55 14.16
50 2.78 3.06 9.67

Fig. 2 : 7, 14, 28 days Split Tensile Strength

Fig. 4: 7, 14, 28 days Compression Strength
C. Compressive Strength
We are preparing the M25mix design with the help of properties D. Flexural Strength
of their materials. Then, we are replacing the Egg shell up to We are preparing the M25mix design with the help of properties
10%, 20%, 30%, 40% & 50%.For each and every proportion, we of their materials. Then we are replacing the Egg shell up to
are making the 3cubes.After making that concrete structures are 10%, 20%, 30%, 40% & 50%.For each and every proportion, we
immersed in water. After we are testing the cubes at 7day, 14day are making the 3beams.After making that concrete structures are
&28 days. Before testing the cubes all are weighted. Compressive immersed in water. After, we are testing the beams at 7day, 14day
strength was calculated for the all proportion of cubes by using &28 days. Before testing the beams all are weighted. Flexural
compressive strength formula with help of their resisting loads. strength was calculated for the all proportion of beams by using
flexural strength formula with help of their resisting loads.

© IJARET All Rights Reserved 8 www.ijaret.com

ISSN : 2394-2975 (Online) International Journal of Advanced Research
ISSN : 2394-6814 (Print) Vol. 1, Issue 1 (July - Sept. 2014) in Education Technology (IJARET)

IV. Conclusion
In this paper, effect of egg shells on some mechanical and physical
properties of concrete was investigated. Based on the analysis in
the present experimental work, the following conclusions can
be deduced:
1. The egg shells as a useful material instead of a waste material
(harm to the environment) that they were hurled in many
hundred tons annually had been use in an engineering
applications.
2. The tensile strength, flexural strength was decreased with
Fig. 5 : Photograph taken in our laboratory during testing of increasing egg shells percent. The tensile strength decreased
beam. from (2.36N/mm2) to (0.21 N/mm2) with increasing egg
shell from (0 wt %) to (50 wt %).
Table 5. : Flexural Strength 3. The compressive strength of the concrete is to meet required
EG added % 7 days N/ 14 days N/ 28 days N/ strength with 20% of the egg shell at the same time weight
mm2 mm2 mm2 of the cubes are reduced upto 2kg to 2.8kg.
0 1.6 2.2 2.86
V. Acknowledgement
10 0.53 1.12 1.82 The authors would like to express an acknowledgement to
20 0.8 1.2 2.01 the Faculty of Civil Engineering and management of Sree
30 0.4 0.44 1.68 Sowdambika College of Engineering, Chettikurichi for providing
the facilities such as the concrete laboratory to accomplish this
40 0.29 0.36 1.47
study. The author also wishes to acknowledge cooperation given
50 0.16 0.29 0.99 by laboratory technician from Faculty of Civil Engineering, Sree
Sowdambika College of Engineering,Chettikurichi to complete
this study.

References
[1] International journal ofcivil and structural engineeringVolume
1, No3, 2010© Copyright 2010 All rights reserved Integrated
Publishing services Review article ISSN.
[2] A Study of Future Trend for Sustainable Development by
Incorporation of Supplementary Cementitious Material’s
by Chirag J. Shah, Vyom B. Pathak, Rushabh A. Shah.
[3] International Journal of Engineering Research & Technology
(IJERT) Vol. 1 Issue 6, August – 2012 ISSN: 2278-0181
[4] AbhilashShukla, C. K. Singh and Arbind Kumar Sharma,
“Study of the Properties of Concrete By Partial Replacement of
Ordinary Portland Cement By Rice Husk Ash”, International
Fig. 6 : 7, 14, 28 days Flextural Strength Journal of Earth Sciences and Engineering ISSN 0974-5904,
Volume 04, No 06 SPL, October 2011, pp. 965-968.
[5] Detwiler, R.J., J.I. Bhatty, J.I., and S. Bhattacharja.
1996. “Supplementary Cementing Materials for Use in
Blended Cements”. RD112. Skokie, IL: Portland cements
Association.
[6] Hiren A. Rathod and JayeshkumarPitroda, “A Study of Future
Trend for Sustainable Development by Incorporation of
SCM‟s”, IJSR - International Journal of Scientific Research,
Volume: 2, Issue: 2, Feb 2013, ISSN No 2277 – 8179.
[7] http:// Building Materials and Technology Promotion Council
(BMTPC)
[8] Okonkwo, U. N.; Odiong, I. C. And Akpabio, E. E., “The
Effects of Eggshell Ash on Strength Properties of Cement-
Stabilized Lateritic”, International Journal Of Sustainable
Construction Engineering & Technology (ISSN: 2180-3242)
Vol. 3, Issue 1, 2012.
[9] Paya, J., Monzo, J., Borrachero, M. V., and Mora, E. P.
“Mechanical treatment of fly ash. Part I: Physical-chemical
Fig. 7 : Combination of Tensile, Flextural and Compressive characterization of ground fly ashes.” Cement Concrete Res.,
Strength 25_7 1469 – 1479 (1995).
[10] Rushabh A. Shah, JayeshkumarPitroda “Pozzocrete:

www.ijaret.com 9 © IJARET All Rights Reserved

International Journal of Advanced Research ISSN : 2394-2975 (Online)
in Eduation Technology (IJARET) Vol. 1, Issue 1 (July - Sept. 2014) ISSN : 2394-6814 (Print)

Modern Material Partially Replaced with Cement in

Mortar”, International Journal of Innovative Technology
and Exploring Engineering (IJITEE), ISSN: 2278-3075, pg.
no. 105-108, Volume-2, Issue-3, February2013.

© IJARET All Rights Reserved 10 www.ijaret.com