Foaming Shave Gel

This unisex Foaming Shave Gel specially formulated to deliver mildness; sensitive skin friendly and
smooth shaving experience. EMERSENSE™ SS 3063 and EMERSENSE™ AS 956P surfactants give rich
dense foam; and further enhance by the present of EMERSENSE™ AO 300. GLYCERINE is
incorporated as humectant to deliver smooth skin feel.

Phase Product/INCI Supplier Amount, %

1 Deionized Water Up to 100
1 Tetrasodium EDTA 0.10
1 Acrylic Acid/C10-C30 Alkyl Acrylate 1.00
1 GLYCERINE EMERY 2.00
EMERSENSE™ AS 956P
2 EMERY 13.40
Sodium Lauryl Sulphate; 95% Powder
EMERSENSE™ SS 3063
2 EMERY 13.00
Disodium Laureth Sulfosuccinate; 30% Liquid
EMERSENSE™ AO 300
2 EMERY 5.00
Cocamidopropylamine Oxide
3 Sodium Hydroxide, 0.5 N 0.20
4 Menthyl Lactate 0.65
4 Polyquaternium 7 1.50
5 Preservative q.s
5 Sodium Chloride q.s

Product Characteristics: Procedure:

Appearance : Clear Gel 1. Disperse phase 1 into deionized water.
Viscosity : 11,000 – 15,000cP 2. Mix phase 2 into phase 1 till homogenize.
pH : 6.8 – 7.3 3. Neutralize the mixture to pH 7 with NaOH.
Stability
4. After neutralization, add components of
Oven, 40˚C : Pass 3 months
Centrifuge : Stable (>1year) phase 4 into mixture, stir till homogenize.
5. Add components 5 at end of mixing.

All products in the text marked with™ are trademarks of the EMERY OLEOCHEMICALS GROUP.
Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance
with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and
purposes they are destined for. We are under no circumstances liable for consequential damage. Each processor is liable for the
compliance of all legal regulations, including patent legislation. EMERY does not guarantee the suitability of a product for a user-specific
purpose.
Baby Pearly Shower Gel

Indulge into experience of rich creamy and easily-build lather body wash for an all-over feeling of
clean and velvet afterfeel. EMERSENSE™ SS 3063, EMERSENSE™ CMEA and EMERSENSE™ CBA
exhibits dense, stabilized creamy flash foaming characteristics. GLYCERINE is incorporated as
humectant to deliver smooth skin feel. EMERSENSE™ EGMS add attractive pearly outlook to the
shower gel.

Phase Product/INCI Supplier Amount, %

1 Deionized Water Up to 100
1 Tetrasodium EDTA 0.10
EMERSENSE™ CMEA
1 EMERY 3.00
Palmkernelamide MEA
EMERSENSE™ EGMS
1 EMERY 2.00
Ethylene Glycol MonoStearate
EMERSENSE™ SS 3063
1 EMERY 43.00
Disodium Laureth Sulfosuccinate; 30% Liquid
2 Alkyl PolyGlucoside 8.00
EMERSENSE™ CBA
2 Cocamidopropyl Betaine EMERY 6.00

3 GLYCERINE EMERY 2.00

3 Fragrance q.s
3 Preservative q.s
3 Citric Acid q.s
3 Sodium Chloride q.s

Product Characteristics: Procedure:

Appearance : Pearly Opaque Liquid 1. Heat the mixture 1 to 68-72˚C.
Viscosity : 2500 – 4000 cP 2. Add phase 2 into mixture; and maintain
pH : 6.0 – 6.5 heat to 68-72˚C. Homogenize at
Stability 350rpm.
Oven, 40˚C : Pass 3 months 3. Allow the mixture cool to 40˚C with slow
Centrifuge : Stable (>1year)
stirring.
4. Add phase 3 and adjust the pH and
viscosity.

All products in the text marked with™ are trademarks of the EMERY OLEOCHEMICALS GROUP.
Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance
with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and
purposes they are destined for. We are under no circumstances liable for consequential damage. Each processor is liable for the
compliance of all legal regulations, including patent legislation. EMERY does not guarantee the suitability of a product for a user-specific
purpose.
Liquid Soap
This formula contains very mild surfactants, EMERSENSE™ SS 3063 and EMERSENSE™ AO 300 that will
provide rich creamy foam. EMERSENSE™ CMEA provides stable thickening and foam. EMERSENSE™
EGDS add attractive pearly outlook.

Phase Product/INCI Supplier Amount, %

1 Lauric Acid EMERY 6.00

1 Myristic Acid EMERY 4.00

1 Triethanolamine; 99% Liquid 7.06

2 Deionized Water Up to 100

EMERSENSE™ EGDS
2 EMERY 2.00
Ethylene Glycol DiStearate
EMERSENSE™ CMEA
2 EMERY 2.00
Palmkernelamide MEA
EMERSENSE™ SS 3063
2 EMERY 20.00
Disodium Laureth Sulfosuccinate; 30% Liquid
EMERSENSE™ AS 956P
3 EMERY 5.40
Sodium Lauryl Sulphate; 95% Powder
EMERSENSE™ AO 300
3 EMERY 5.00
Cocamidopropylamine Oxide

3 Tetrasodium EDTA 0.10

4 Polyquaternium 39 2.00
4 Preservative q.s
4 Fragrance q.s
4 Citric Acid q.s
4 Sodium Chloride q.s
 Product Characteristics: Procedure:
Appearance : Pearly liquid 1. Melt the mixture 1 at 70-75˚C. Then neutralize
Viscosity : 3000 - 4500cP with TEA.
pH : 5.0 – 7.0 2. Add mixture 2 into mixture 1; and keep the
Stability heat at 70-75˚C.
Oven, 40˚C : Pass 3 months
3. Add phase 3 into mixture periodically; and
Centrifuge : Stable (>1year)
maintain heat to 70-75˚C. Homogenize at
300rpm.
4. Allow the mixture cool to 40˚C with slow
stirring.
5. Add phase 4 into the mixture; and adjust the
pH and viscosity.

All products in the text marked with™ are trademarks of the EMERY OLEOCHEMICALS GROUP.
Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with
our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they
are destined for. We are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal
regulations, including patent legislation. EMERY does not guarantee the suitability of a product for a user-specific purpose.
Hair Care: Conditioning Shampoo
This conditioning shampoo is specially formulated to deliver better conditioning to hair fibers.
EMERSENSE™ ESA 3063 and EMERSENSE™ AO 300 functions as mild scalp cleaner and provides
dense, creamy foam. Meanwhile EMERSENSE™ CMEA enhances the creation of stable foam.

Phase Product/INCI Supplier Amount, %

1 Deionized Water Up to 100
1 Jaguar Excel 0.60
EMERSENSE™ CMEA
2 EMERY 3.00
Palmkernelamide MEA
EMERSENSE™ EGDS
2 EMERY 2.00
Ethylene Glycol DiStearate
EMERSENSE™ ES 2762
2 EMERY 32.00
Sodium Laureth Sulfate, 27% Liquid
EMERSENSE™ SS 3063
2 EMERY 20.00
Disodium Laureth Sulfosuccinate; 30% Liquid
EMERSENSE™ AO 300
3 EMERY 5.00
Cocamidopropylamine Oxide
3 GLYCERINE EMERY 3.00
3 Polyquaternium 7 2.00
3 Tetrasodium EDTA 0.10
4 Citric acid q.s
4 Sodium Chloride q.s
4 Dyes, Fragrance, Etc q.s.

Product Characteristics: Procedure:

Appearance : Clear Liquid 1. Disperse the Jaguar Excel in DI water;
Viscosity : 2500 – 4000 mix till fully dissolves.
pH : 5.5 – 6.5 2. Melt the mixture 2 at 68-72˚C.
Stability Homogenize at 350rpm.
Oven, 40˚C : Pass 3 months 3. Add phase 1 into phase 2 and maintain
Centrifuge : Stable (>1year) the temperature at 68-72˚C.
4. Allow the mixture cool to 40˚C with slow
stirring.
5. Add phase 3 into the mixture; followed
by phase 4 to adjust pH and viscosity.

All products in the text marked with™ are trademarks of the EMERY OLEOCHEMICALS GROUP.
Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with
our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they
are destined for. We are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal
regulations, including patent legislation. EMERY does not guarantee the suitability of a product for a user-specific purpose.
Skin Care: Foaming Facial Wash
This formula contains very mild surfactants, EMERSENSE™ SS 3063 and EMERSENSE™ CBA that will
provide rich creamy foam without defatting the skin. It also contains EMERSENSE™ ES 6962 that are
stable over a wide pH range. This formula also has GLYCERINE to provide some skin moisturizing.

Phase Product/INCI Supplier Amount, %

1 Deionized Water Up to 100
EMERSENSE™ CMEA
1 EMERY 3.00
Palmkernelamide MEA
EMERSENSE™ EGDS
1 EMERY 2.00
Ethylene Glycol DiStearate
EMERSENSE™ ES 6962
1 EMERY 18.00
Sodium Laureth Sulfate, 69% Paste
EMERSENSE™ SS 3063
1 EMERY 7.50
Disodium Laureth Sulfosuccinate; 30% Liquid
2 PEG-7 Glyceryl Cocoate 1.80
EMERSENSE™ CBA
2 EMERY 5.00
Cocamidopropyl Betaine
2 GLYCERINE EMERY 3.00
2 Tetrasodium EDTA 0.10
3 Tocopherol 0.50
4 Sodium Chloride q.s
4 Preservative q.s
4 Citric Acid q.s
4 Fragrance, color q.s

Product Characteristics: Procedure:

Appearance : Clear Liquid 1. Heat the mixture 1 to 68-72˚C.
Viscosity : 2800 - 4500cP Homogenize at 350rpm.
pH : 5.5 – 6.5 2. Add phase 2 into mixture; and mix till
Stability homogenize.
Oven, 40˚C : Pass 3 months 3. Allow the mixture cool to 40˚C with
Centrifuge : Stable (>1year) slow stirring.
4. Add phase 3 and adjust the pH and
viscosity by adding phase 4.

All products in the text marked with™ are trademarks of the EMERY OLEOCHEMICALS GROUP.
Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance
with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes
they are destined for. We are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all
legal regulations, including patent legislation. EMERY does not guarantee the suitability of a product for a user-specific purpose.
Dish Wash

This formula contains very mild surfactants, EMERSENSE™ SS 3063 and EMERSENSE™ AO 300 that will
provide rich creamy foam without defatting the skin. It also contains EMERSENSE™ ES 2762 that are
stable over a wide pH range. This formula also has EMEREX™ EH 2681 and GLYCERINE to provide
some skin moisturizing.

Phase Product/INCI Supplier Amount, %

1 Deionized Water Up to 100
EMERSENSE™ ES 2762
1 EMERY 41.00
Sodium Laureth Sulfate, 27%
EMERSENSE™ SS 3063
1 EMERY 12.00
Disodium Laureth Sulfosuccinate; 30% Liquid
EMERSENSE™ AO 300
1 EMERY 7.00
Cocamidopropylamine Oxide
EMERSENSE™ AM 8025
1 EMERY 2.50
Palmkernelamide DEA
2 Glycerine EMERY 3.00
EMEREX™ EH 2681
2 EMERY 2.00
2-Ethylhexyl Oleate
3 Sodium Chloride q.s
3 Preservative q.s
3 Citric Acid q.s
3 Fragrance, color q.s

Product Characteristics: Procedure:

Appearance : Clear Liquid 1. Mix phase 1at room temperature.
Viscosity : 2800 - 4500cP 2. Mix phase 2 into phase 1 after
pH : 5.5 – 6.5 sufficiently homogenize.
Stability 3. Add phase 3 into the mixture to adjust
Oven, 40˚C : Pass 3 months pH, viscosity and color.
Centrifuge : Stable (>1year)

All products in the text marked with™ are trademarks of the EMERY OLEOCHEMICALS GROUP.
Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance
with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes
they are destined for. We are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all
legal regulations, including patent legislation. EMERY does not guarantee the suitability of a product for a user-specific purpose.
 Liquid Laundry Detergent
This formula contains very mild surfactants, EMERSENSE™ SS 3063 and EMERSENSE™ AO 300 that will
provide rich creamy foam without defatting the skin. It also contains EMERSENSE™ ES 2762 that are
stable over a wide pH range. This formula also has EMEREX™ EH 2681 and GLYCERINE to provide
some skin moisturizing.

Phase Product/INCI Supplier Amount, %

1 Deionized Water Up to 100
EMERSENSE™ ES 2762
1 EMERY 41.00
Sodium Laureth Sulfate, 27%
EMERSENSE™ SS 3063
1 EMERY 12.00
Disodium Laureth Sulfosuccinate; 30% Liquid
EMERSENSE™ AO 300
1 EMERY 7.00
Cocamidopropylamine Oxide
EMERSENSE™ AM 8025
1 EMERY 2.50
Palmkernelamide DEA
2 Glycerine EMERY 3.00
EMEREX™ EH 2681
2 EMERY 2.00
2-Ethylhexyl Oleate
3 Sodium Chloride q.s
3 Preservative q.s
3 Citric Acid q.s
3 Fragrance, color q.s

Product Characteristics: Procedure:

Appearance : Clear Liquid 1. Mix phase 1at room temperature.
Viscosity : 2800 - 4500cP 2. Mix phase 2 into phase 1 after
pH : 5.5 – 6.5 sufficiently homogenize.
Stability 3. Add phase 3 into the mixture to adjust
Oven, 40˚C : Pass 3 months pH, viscosity and color.
Centrifuge : Stable (>1year)

All products in the text marked with™ are trademarks of the EMERY OLEOCHEMICALS GROUP.
Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance
with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes
they are destined for. We are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all
legal regulations, including patent legislation. EMERY does not guarantee the suitability of a product for a user-specific purpose.