Scribd
Upload
389 views

Tutorial On Rectifier

fhfhfjdjdj

Uploaded by

donny
Copyright
© © All Rights Reserved
Available Formats
Download as PDF or read online on Scribd
389 views

Tutorial On Rectifier

fhfhfjdjdj

Uploaded by

donny
Copyright
© © All Rights Reserved
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 3
3:1 A single-phase bridge rectifier has a purely resistive load R = 10 9, the peak supply volt- age Vj = 170 V, and the supply frequency f = 60 Hz. Determine the average output voltage of the rectifier if the source inductance is negligible. Vn = 170 V, R= 100, f = 60 Hz From Eq. (3-21), Vs = 0.6366 Vm = 0.6366 x 170 = 113.32 V 35 A three-phase bridge rectifier has a purely resistive load of R = 100 and is supplied from a 280-V 60-Hz supply. The primary and secondary of the input transformer are con- nected in Y. Determine the average output voltage of the rectifier if the source induc- tances are negligible. R = 100 ©, Vs = 280 V, F = 60 Hz Vm = 280 x V2/\3 = 228.6 V From Eq. (3-40), Vgc = 1.6542 x 228.6 = 378.15 V 3.7 The single-phase bridge rectifier of Figure 3.6a is required to supply an average voltage of Vie = 400 V toa resistive load of R = 10 2. Determine the voltage and current ratings of diodes and transformer. Vee = 400 V,R = 10.9 From Eq. (3-21), Vac = 400 = 0.6366 Vm OF Vin = 628.34 V The rms phase voltage is Vs = Vin/V2 = 628.34/\2 = 444.3 V Tae = VaR = 400/10 = 40 A Diodes: Peak current, I, = 628.34/10 = 62.834 A Average current, Ig = Iid2 = 40/2 = 20 RMS current, In = 62.834/2 = 31.417 A ‘Transformer RMS voltage, Vs = Vm/V2 = 444.3 V RMS current, Is = Im/V2 = 44.43 A Volt-amp, VI = 444.3 x 44.43 = 19.74 kVA Pac = (0.6366 Vn)*/R and Pac = Wels = Vn? /2R TUF = Pac/Pac = 0.6366? x 2 = 0.8105 and the de-rating factor of the transformer is 1/TUF = 1.2338. 38 A three-phase bridge rectifier is required to supply an average voltage of Vc = 750 V at a ripple-free current of ij. = 9000 A. The primary and secondary of the transformer are connected in Y. Determine the voltage and current ratings of diodes and transformer. Voc = 750 V, lac = 9000 A From Eq. (3-40), Vic = 750 = 1.6542 Vin OF Vm = 453.39 V The phase voltage is Vs = Vm/V2 = 453.39/V2 = 320.59 V Diodes: Peak current, Ip = 9000 A Average current, Is = Iac/2 = 9000/2 = 4500 A RMS current, I, = 9000/V2 = 6363.96 A ‘Transformer: RMS voltage, V, = 320.59 V RMS current, I; = Ip = 9000 A Volt-amp per phase, VI = 320.59 x 9000 = 2885.31 kVA TUF = Pyc/Pae = 750 x 9000/(3 x2885.31) = 0.7798 and the de-rating factor of the transformer is 1/TUF = 1.2824 3.21 The single-phase full-wave rectifier of Figure 3.5a has a ripple-free average load current of J,, (a) Draw the waveforms for currents in D;, D2, and transformer primary: (a) ae aS i

You might also like