Electrical 23D.2: Bus, Behaves When

230.
25-5
Electrical Equipment - Course 23D.2
GENERATORS: PART 5
INFINITE BUS OPERATION
1. OBJECTIVE
The student must be able to:
1. Define an "infinite bus".
2. Explain how the current in a generator increases as

it is loaded.
3. Explain how a generator, connected to an infinite
bus, behaves when:
(a) it is supplying a .constant MW load and -its
exci ta tion is varied.
(b') its MW load is varied wi th the exci ta tion

re~aining constant.
2. INTRODUCTION
Lesson 230.22-1 dealt wi'l;h a generator operating on
no load and supplying an isolated system. This lesson
explains how a generator behaves when it is loaded onto
an infini te bus.
The next lesson explains how a generator behaves

when it is loaded onto a non-finite bus grid.
3. THE INFINITE BUS

3.1 Defini tion
By defini tion, an infinite bus has constant

voltage and frequency.
All generators, when loaded onto a power
system, will to some degree alter the system's
voltage and frequency_ However, when a small
generator is loaded on a large system, it will have
negligible effects on the vol tage and frequency and
consequently, wi th respect to the small generator,
the system behaves as an infinite bus.
August 1981 - 1 -
230.25-5
4. GENERATOR LOADED ON TO AN INFINITE BUS
4.1 Generator MW Loading Increased From Zero
When a generator is connected to an infinite

bus, its terminal voltage is the same as the infin-
ite bus voltage and therefore remains constant.
When more mechanical power is produced by the tur-
bine the generator converts this additional
mechanical power into additional active electrical
power P.
As the generator produces more active power P,
it also produces more current I a - This is explain-
ed by the relationship.
p = I3vL1a Cos 6.
It follows that as P increases (nVT is con-
stant) then I a Cos e must increase. Typically, the
magnitude of Cos e (power factor) will vary between
1.0 to 0.·8. Consequently, the magnitude of the
load current I a will increase almost in proportion
to an increase in load power P.
4.2 Generator on Constant MW Load, Excitation Varied
When a· generator is producing watts but no

vars, (1.0 pf) it is operating with optimum excita-
tion, ie, the excitation is just sufficient to
cause the generator to produce all active power and
no reactive power.
When a generator is on full load at 1.0 pf and

its excitation is varied, the flux produced by the
field also varies, see Figure 1.
A decrease in excitation will cause the gener-

ator to be underexcited for the constant MW load
and the power factor will become leading. This
effect was explained in the previous lesson.
It must be noted that reducing the excitation

will increase the load angle. Should this load
angle exceed 90° then pole slipping will result.
An increase in excitation will cause the gen-

erator to be overexcited for the constant MW load
and the power factor will become lagging. Again
this effect was explained in lessons 230.25-1 and
230.25-2.
- 2 -
230.25-5
The vector diagrams in Appendix 1 of this

lesson illustrate these effects.
Xd Infinite Bus
Constanf
Excitation
Varying Vr Voltage and
Frequency
Steam
Input Constant
Figure 1: Equivalent circuit excitation varying, MW load

constant.
4.3 Generator on Varying MW Load, Excitation Constant
FigLlre 2 shows a generator connected to an

infinite bus. The MW load is varied while the
exel tation is held constant.
Increasing the active power output from 75% of

full load at 1.0 pf, will cause IOClre current to
flow in the generator stator. This will cause more
armature reaction which will weaken the fluxes in·
the generator. The generator will become under-
excited. ie, it now has insufficient excitation for
it to operate at 1.0 pi. Consequently, the pi of
the generator will be leading and the generator
will consume vars.
Decreasing the active power output from 75%

full load at ,1.0 pf will cause less current to flow
giving less armature reaction. This will cause
less armature reaction which will strengthen the
fluxes in the generator. The generator is now
overexcited ie, the generator now has more than
enough excitation for it to operate at 1.0 pf, and
its pf will be lagging. Excessive excitation, for
a given MW load, will cause exessive production of
lagging vars.
This information is illustrated by the vector

diagram, see Appendix 2 of this lesson.
- 3 -
230.25-5
la
Xd In,finite Bus
Constant
Excitation Voltage and
Constant
Frequency
Steam
Input Varied
Figure 2: Equivalent circuit, excitation constant, MW load

varying
5. SUMMARY FOR A GENERATOR CONNECTED TO AN INFINITE BUS
(a) A generator, overexcited for a given MW load and

terminal voltage, operates at a lagging pf.
(b) A generator, underexcited for a given MW load and
terminal voltage operates at a leading pf.
(c) Increasing MW load on a generator with constant
excitation, will make the generator's power factor
become more leading.
An operator, when loading a generator, will have to
take care to ensure that adequate excitation is
provided. Failure to do this can cause the load
angle to exceed 90°. Pole slipping will result.
(d) Decreasing MW load on a generator with constant
exei tation, wi 11 make the generator I s power factor
become more lagging.
An operator, when unloading a generator, will have
to take care to ensure that excessive excitation is
not provided. Failure to observe this precaution
can give excessive fluxes which can cause excessive
prOduction of lagging vars.
- 4 -
230.25-5
ASSIGNMENT
1. By def ini ticn, what is an "inf in1 te Bus "? By defini-

ticn, what is a nnon-finite bus"?
2. A generator is supplying an infinite bus. Explain,

using labelled diagrams, why the power factor of the
generator becomes:
(a) more leading when the excitation is decreased.
( b) more lagging when the excitation is increased.
(e) I;\ore leading when the MW load is increased.
(d) more lagging when the MW load is decreased.
3. A generator has a manually controlled excitation

system. State the actions the operator must take to
ensure safe generator operation when MW loading is:
(a) increased
(b) decreased
4. A 540 MW generator is supplying a 4000 MW grid. Explain

briefly why the grid with respect to this generator,
will or will not behave as an infinite bus.
J .R.C. Cowling
- 5 -
:l30,25-5
APPENDIX 1: Vector diagram showing a generator on full load

(constant MW) with the excitation being varied.
Generator on an "infinite bus".
",
/
/ "
E
",
;'
/
Radii of
constant
/)1
--- r::
,
I
I
.excitation I
,~'!..2
I
Suffix 1 denotes excitation to give 1.0 pf at full load.

Suffix 2 denotes increased excitation giving lagging p£ at
full load,
Suffix 3 denotes reduced excitation giving leading pf at full
load.
Note the following:
( a) As the generator is on a inf ini te bus, VTl = V'l'2 =

T
( b) VIncreasing
" the excitation causes the power factor to
become more lagging.
(e) Decreasing the excitation causes the power factor to
become more leading.
(d) As the power factor becomes less than 1. a (lead or lag)
the current I a increases for the same MW load.
(e) As the excitation is increased, 0 decreases and vice
versa.
As Cos e is less than 1.0 in Suffix 2 and 3 cases, it follows

that I a 2 and I a 3 must increase in magnitude relative to I a at
unity pf.
- 1 -
230.25-5
APPENDIX 2:- Vector diagram showing a generator with its load

varying, excitation held constant. Generator on
infinite bus.
,/
,/ la,Xd
,,"""_ _';"_ _...l~ ~~~T,=VT2=VT3
.................
"
'lI.7
I
I
E3 I
I
I la, I
I
"- Constant
I
excitation la2
radius
Suffix 1 denotes excitation set to give 1.0 pf at 75% load.

Suffix 2 denotes load reduced to 50% with constant excita-
tion.
Suffix 3 denotes load increased to 100% with constant excita-
tion.
Note the following:
(a) As the generator is on an infinite bus, VT1 , - VTZ '

VT are constant.
( b) Inrlreasing the load MW causes more current l a to flow
giving a larger value of IaXd and vice versa.
( c) Increasing load MW causes the current l a to become roore
leading.
(d) Decreasing MW load causes the current l a to become more
lagging.
(e) As the load increases, 0 increases and vice versa.
- 1 -

Electrical 23D.2: Bus, Behaves When

Uploaded by

Copyright:

Available Formats

Electrical 23D.2: Bus, Behaves When

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Electrical 23D.2: Bus, Behaves When

Uploaded by

Copyright:

Available Formats

230.

Electrical Equipment - Course 23D.2

1. Define an "infinite bus".

2. Explain how the current in a generator increases as

(b') its MW load is varied wi th the exci ta tion

The next lesson explains how a generator behaves

3. THE INFINITE BUS

By defini tion, an infinite bus has constant

4. GENERATOR LOADED ON TO AN INFINITE BUS

4.1 Generator MW Loading Increased From Zero

When a generator is connected to an infinite

4.2 Generator on Constant MW Load, Excitation Varied

When a· generator is producing watts but no

When a generator is on full load at 1.0 pf and

A decrease in excitation will cause the gener-

It must be noted that reducing the excitation

An increase in excitation will cause the gen-

The vector diagrams in Appendix 1 of this

Figure 1: Equivalent circuit excitation varying, MW load

4.3 Generator on Varying MW Load, Excitation Constant

FigLlre 2 shows a generator connected to an

Increasing the active power output from 75% of

Decreasing the active power output from 75%

This information is illustrated by the vector

Figure 2: Equivalent circuit, excitation constant, MW load

5. SUMMARY FOR A GENERATOR CONNECTED TO AN INFINITE BUS

(a) A generator, overexcited for a given MW load and

1. By def ini ticn, what is an "inf in1 te Bus "? By defini-

2. A generator is supplying an infinite bus. Explain,

3. A generator has a manually controlled excitation

4. A 540 MW generator is supplying a 4000 MW grid. Explain

APPENDIX 1: Vector diagram showing a generator on full load

Suffix 1 denotes excitation to give 1.0 pf at full load.

Note the following:

( a) As the generator is on a inf ini te bus, VTl = V'l'2 =

As Cos e is less than 1.0 in Suffix 2 and 3 cases, it follows

APPENDIX 2:- Vector diagram showing a generator with its load

Suffix 1 denotes excitation set to give 1.0 pf at 75% load.

Note the following:

(a) As the generator is on an infinite bus, VT1 , - VTZ '

You might also like