Scribd
Upload
143 views

Serial Number Robot

This document provides instructions for finding the serial number of a robot and its controller. The serial number of the mechanical unit can be found printed on a label in a specified position, as described in the robot's manual. The controller ID can be displayed on the teach pendant by accessing the status screen version information. It can also be found in backup files on a memory card by opening specific files and locating the "Controller ID" field.

Uploaded by

Agustín Utrera
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
143 views

Serial Number Robot

This document provides instructions for finding the serial number of a robot and its controller. The serial number of the mechanical unit can be found printed on a label in a specified position, as described in the robot's manual. The controller ID can be displayed on the teach pendant by accessing the status screen version information. It can also be found in backup files on a memory card by opening specific files and locating the "Controller ID" field.

Uploaded by

Agustín Utrera
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

FINDING SERIAL NUMBER | ROBOT

How to check the robot serial no.


The printed position of the robot serial number is described in the Chapter “PREFACE” of MECHANICAL UNIT OPERATOR’S
MANUAL of each robot. Refer to the corresponding robot mechanical unit manual.

SAMPLE: R-2000iC (B-83664EN_02)

The label stating the mechanical unit specification number is


affixed in the position shown below.

Before reading this manual, determine the specification


number of the mechanical unit.

Position of label indicating


mechanical unit specification
number

INSTRUCTIONS FINDING SERIAL NUMBER | ROBOT 1/3


FINDING SERIAL NUMBER | ROBOT

How to check controller ID


You can check Controller ID by the teach pendant connected to the robot controller or the all backup of the robot controller.

A: HOW TO CHECK BY THE TEACH PENDANT: The following is procedure how to display the
software version screen in the status screen to check “Controller ID”.

1. Press the MENU key and select “0 -- NEXT --”. 2. Select “4 STATUS”.

4. Check the controller ID that is displayed at the right


3. Press F1, [TYPE] and select “Version ID”. side of “Controller ID” item.

INSTRUCTIONS FINDING SERIAL NUMBER | ROBOT 2/3


FINDING SERIAL NUMBER | ROBOT

B: HOW TO CHECK BY THE BACKUP OF THE ROBOT CONTROLLER: You must save the all backup of the
robot controller before checking Controller ID. Refer to the Section B.3 “All Backup” of the R-30iB/R-
30iB Mate CONTROLLER OPERATOR’S MANUAL (Basic Operation) to know how to save. The following is
procedure how to check Controller ID by using the backup file.

STEP 1 STEP 2

1. Insert the memory card or USB memory that has the Controller ID can be checked in ORDERFIL.DAT too.
saved all backup.
1. Insert the memory card or USB memory that has
2. Open the file, SUMMARY.DG which is saved in the saved all backup.
memory device. It is saved in the specified directory
when all backup has been saved. 2. Open the file, ORDERFIL.DAT which is saved in
memory device. It is saved in the specified directory
3. Search the item of “Controller ID”. when all backup has been saved.
3. Controller ID is displayed as BMB12345 next to
arranged “Z” line. Those excluding the head of “B”
are Controller ID (ex. MB12345).

In some case of opening SUMMARY.DG by the text editor


such as notepad, no line feed is displayed as follows.

Open SUMMARY.DG by other text editor that can


display the line feed code (LF) correctly again.
If text editor does not support the file feed code (LF),
open it by notepad, and search the word “Controller
ID”. Controller ID is displayed at the right side of
“Controller ID :”.

INSTRUCTIONS FINDING SERIAL NUMBER | ROBOT 3/3

You might also like