Belt Catalogue

www.pixtrans.com
 WRAP BELTS

®
X’set WRAP CONSTRUCTION BELTS
CLASSICAL SECTION
Top Min. Mfg. Belt Length Factor
Thickness Angle Length
Section Width Standard Pulley Dia. Range
(mm) (Degree) Lp to La Li to Lp Li to La Desig.
(mm) (mm) Min. Max. (mm) (mm) (mm)
8 8.0 5.0 40 DIN 2215-1975 40 39" 174" 12 19 31 Li
RAW EDGE COGED BELTS

Z 10.0 6.0 40 IS 2494, BS 3790, ISO 4184 50 9.5" 176” 16 22 38 Li

A 13.0 8.0 40 IS 2494, BS 3790, ISO 4184 71 13" 357" 14 36 50 Li
B 17.0 11.0 40 IS 2494, BS 3790, ISO 4184 112 16" 900" 26 43 69 Li
20 20.0 13.0 40 DIN 2215-1975 160 31.5" 900” 31 48 79 Li
C 22.0 14.0 40 IS 2494, BS 3790, ISO 4184 180 31" 900" 32 56 88 Li
25 25.0 16.0 40 DIN 2215-1975 250 57" 900" 39 61 100 Li
D 32.0 19.0 40 IS 2494, BS 3790, ISO 4184 355 44.5" 900" 40 79 119 Li
E 38.0 23.0 40 IS 2494 500 90" 900" 53 92 145 Li

WEDGE SECTION
SPZ 10.0 8.0 40 BS 3790 63 365mm 4000mm 13 37 50 Lp
SPA 13.0 10.0 40 BS 3790 90 576mm 9110mm 18 45 63 Lp
RIBBED / POLY V-BELTS

SPB 17.0 14.0 40 BS 3790 140 1000mm 16824mm 28 60 88 Lp

19 19.0 15.0 40 DIN 7753 180 2253mm 9137mm 25 69 94 Lp
SPC 22.0 18.0 40 BS 3790 224 1861mm 22943mm 30 83 113 Lp

NARROW SECTION
3V 9.7 8.0 40 RMA IP 22 63 19.5" 160" 13 37 50 La
5V 15.8 14.0 40 RMA IP 22 140 47” 657” 25 60 85 La
8V 25.4 23.0 40 RMA IP 22 335 100" 905” 53 92 145 La

LIGHT DUTY SINGLE V-BELTS

3L 9.65 5.59 40 RMA IP 23 45 10.5" 177" 16 22 38 La
4L 12.7 7.87 40 RMA IP 23 65 15.0" 359" 14 36 50 La
5L 16.7 9.65 40 RMA IP 23 91 21.0" 242" 26 43 69 La
TIMING BELTS

Features:
• Oil resistant & antistatic
• Maximum Belt linear speed (Classical section: up to 30 m/sec, Wedge: up to 42 m/sec, Narrow: up to 45 m/sec)
• Temperature range: -18ºC to +80ºC
• ATEX certified FRAS Belts are also available

Application: Industrial drives such as pumps, generators, ball-mills, crushers, compressors etc.
Note: Intermediate sizes are available upon request

DuraBand ®- HXS BANDED BELTS (Reference Standards: ISO 5290, ISO 5291, BS 3790)
Top Manufacturing
Thickness Angle Pitch Length
AUTOMOTIVE

Section Width Range

(mm) (Degree) (mm) Desig.
(mm) Min. Max.
BELTS

HZ 10.0 8.50 40 10.3 45" 174" Li

HA 13.0 10.0 40 15.9 33" 255" Li
HB 17.0 13.0 40 19.0 43" 370" Li
HC 22.0 16.0 40 25.5 47" 900" Li
HD 32.0 21.5 40 37.0 90" 900" Li
HE 38.0 27.0 40 44.5 90" 900" Li
HSPZ 10.0 10.0 40 12.0 1205 mm 9080 mm Lp
HSPA 13.0 12.0 40 15.0 959 mm 4515 mm Lp
HSPB 17.0 16.0 40 19.0 1762 mm 9331 mm Lp
HSPC 22.0 20.0 40 25.5 2267 mm 22943 mm Lp
ACCESSORY
PRODUCTS

H3V 9.70 10.0 40 10.3 37" 180" La

H5V 15.8 16.0 40 17.5 51" 663" La
H8V 25.4 25.0 40 28.6 100" 905" La
Note: B, C, D, E, SPC & 8V section Belts in single and banded constructions can be supplied up to 1000" or 25400 mm
Features:
• Enhanced power transmission capacity up to 25%
• Lesser number of Belts required as compared to multiple single-Belt drive
• High adhesion strength between tie band and the Belts
• Eliminates chances of mismatch in length as observed in multiple single-Belt drive
• Temperature range: -18ºC to +80ºC
• Antistatic, oil and heat resistant
DIMENSIONS
PRODUCT

• ATEX certified FRAS Belts are also available

• Manufactured through single-stage-curing process
Application: Vertical shaft drives, agricultural drives, stone crushers, compressors, generator sets etc.

1
 WRAP BELTS
SPECIAL CONSTRUCTION BELTS
®
ECHELON - XS (PT-O) For food-grain & ceramic industry
Top Pattern Manufacturing
Thickness Angle Length
Section Width Height Range
(mm) (Degrees) Desig.
(mm) (mm) Min. Max.
B (17x14) 17.0 14.0 3.0 40 85" 900" Li

RAW EDGE COGED BELTS

B (17x16) 17.0 16.0 5.0 40 85" 900" Li
A (13x13) 13.0 13.0 5.0 40 48" 356" Li
37 x 25 37.0 25.0 5.0 40 161" 900" Li

®
TEXTURA - XS (PT-HC) For ceramic and general industries
B (17x17) 17.0 17.0 6.0 40 42" 900” Li
C (22x20) 22.0 20.0 6.0 40 66" 900" Li

®
CERAMICA - XS (PT-6) For ceramic industry
B (17x22) 17.0 22.0 11.0 40 85" 357" Li
B (17x26) 17.0 26.0 15.0 40 66" 356" Li

RIBBED / POLY V-BELTS

C (22x25) 22.0 25.0 11.0 40 73" 320" Li

®
EXTRACTOR - XS (PT-7) For carrot harvesting machines, horticultural industry
37(37x25) 37.0 25.0 7.0 40 116" 375" Li
D (32x26) 32.0 26.0 7.0 40 142" 900" Li

®
VOYAGER -XS For tiles industry
20 x 12.5 20.0 15.0 2.5 40 155" 900" Li

PTU For medical equipment

TIMING BELTS
B 17.0 16.5 5.5 40 36.5" Li
Features:
• Temperature range: -18ºC to +80ºC
• Longer service life
• Excellent adhesion between top profile and the Belt
• Application specific Belts
• Designed for applications where power transmission and conveying of material is done simultaneously

®
MUSCLE -XS3 HIGH POWER, MAINTENANCE-FREE BELTS

AUTOMOTIVE
Mfg.
Length
Range

BELTS
Section Designation
Min. Max.
SPZ 365 mm 4000 mm Lp
SPA 576 mm 9110 mm Lp
SPB 1000 mm 16824 mm Lp
SPC 1861 mm 22943 mm Lp
3V 19.5" 160" La
5V 47" 657" La
8V 100" 905" La
Note: PIX-Muscle®-XS3 Belts in all other popular Wrap Belt sections and in Banded construction
can be made available upon request.
ACCESSORY
PRODUCTS

Features:
• Extremely high power rating - up to 50% more than regular belt
• High efficiency up to 98%
• Maintenance free
• Extended service life & less machine down-time
• Antistatic complies with ISO 1813
• Superior oil & heat resistance
• REACH & RoHS compliant, provides an eco-friendly system
• Extended temperature range from -25°C to +100°C
DIMENSIONS

Application:
PRODUCT

Wire rope manufacturing industry, steel industry, power plants, textile industry, pharmaceutical Industry,
food processing units

2
 WRAP BELTS

FRAS ® FIRE RESISTANT, ANTISTATIC BELTS

®
FRAS - XS
Product Range:
Sections: 8, Z, A, B, 20, C, 25, D, E, SPZ, SPA, SPB, 19, SPC, 3V, 5V, 8V
RAW EDGE COGED BELTS

®
FRAS -HXS BANDED BELTS
Product Range:
Sections: HA, HB, HC, HD, HE, HZ, HSPZ, HSPA, HSPB, HSPC, H3V, H5V, H8V

Features:
• Ensures high level of protection against fire hazards
• Fire resistance test result of flame & glow time period is lesser than the desired 5 seconds, maximum time
as per BS 3790 standard
• ATEX values for electrical resistance are approximately 10-15 times more stringent than ISO 1813, leading
to a more safer drive (Value for PIX SPB section Belt observed 0.1 MÙ against 2 MÙ, maximum value of
the ISO 1813 standard)
• Resistance to emit inflammable substances while in operation
• Damage-free and crack resistance properties to ensure smooth operation
RIBBED / POLY V-BELTS

• Longer service life

• Dimensional stability
• Antistatic, oil and heat resistant
• Temperature range: -18?C to +80?C

Application: Coal mines, fire prone areas, petrochemical installations etc.

TIMING BELTS

®
GALLANT HEAVY DUTY, HIGH POWER BELTS
®
GALLANT - XS
Product Range:
Sections: A, B, C, SPA, SPB, SPC, 5V, 8V

®
GALLANT -HXS BANDED BELTS
AUTOMOTIVE

Product Range:
Sections: HA, HB, HC, HSPA, HSPB, HSPC, H5V, H8V
BELTS

Features:
• Enhanced power transmission capacity
- Up to 40% in PIX-Gallant® single Belts
- Up to 55% in PIX-Gallant®-HXS Banded Belts
• Especially treated outer tough cover reduces sidewall wear and withstands to sudden shear forces at
peak loads
• Designed to exhibit excellent durability, strength, abrasion and wear resistance
• Unique performance under heavy shocks and impulse loads
• Low heat generation even at very high speed
ACCESSORY
PRODUCTS

• Best solution for compact drives as lesser number of Belts is required

• One single branding that combines all the major features and fit for any robust application
• Operating temperature range: -25°C to +100°C

Application: Forestry-wood cutter. Mining: Surface miner, stacker, excavators, re-claimers

Construction - Stone crushers, jaw crushers, cone crushers. Manufacturing: Ball-mills, pumps, VRM
DIMENSIONS
PRODUCT

3
 WRAP BELTS
®
IGLOO LOW TEMPERATURE BELTS
®
IGLOO -XS
Product Range:
Sections: Z, A, B, C, SPZ, SPA, SPB, SPC, 3V, 5V, 8V
®
IGLOO - HXS BANDED BELTS

RAW EDGE COGED BELTS

Product Range:
Sections: HZ, HA, HB, HC, HSPZ, HSPA, HSPB, HSPC, H3V, H5V, H8V

Features:
• Excellent performance while operating in extremely low ambient temperatures of up to -45ºC
• Temperature range: -45ºC to +80ºC
• Longer service life
• Improved crack resistance properties to ensure smooth operation in low temperature applications

Application: Cooling tunnels, cold storage for conveying purpose, low ambient temperature drives etc.

®
GreenPower -XS HALOGEN FREE BELTS

RIBBED / POLY V-BELTS

Features:
• Trouble free and efficient performance without any harmful emissions
• Eco-friendly Belts
• REACH and RoHS compliant
• Smooth-running operation
• Halogen-free
• Helps maintain pollution free environment
• Temperature range: -18ºC to +80ºC

Product Range: All Classical, Wedge & Narrow Belts

TIMING BELTS
®
X’set - VS VARIABLE SPEED BELTS
(Reference Standards: ISO 3410:1989 / BS 3733: 1974)
Angle Manufacturing Range Length
Section (Degrees) (mm) Desig.
Min. Max.
17x8 40 800 1262 Li
25x13 / HI 30 1080 8992 Li
32x15 / HJ 30 1171 8240 Lp
38x18 / HK 30 1500 9170 Lp
45x20 / HL 30 1608 8847 Lp
51x20 / HM 30 1891 9588 Lp

AUTOMOTIVE
55x22 30 1921 6671 Lp

BELTS
60x25 30 1956 6681 Lp

(Non-standard sizes)
13x11 40 1067 2057 Li
15x9 40 572 6452 Li
19x11 40 1057 3937 Li
21x9 40 991 1930 Li
22x16 40 1727 6553 Li
30x12 30 950 6604 Li
33x22 30 3912 22860 Li
ACCESSORY

38x23 26 2362 8966 Li

PRODUCTS

40x20 30 794 6579 Li

68x24 32 2540 9042 Li
Features:
• Excellent transverse rigidity and flexibility to prevent bucking at minimum diameter settings where
Belt stress is more
• Firm gripping action in the contact areas; provide positive traction for precise, immediate response
• Higher power transmission than regular Belts
• Longer service-life
• Facilitates smooth running without excessive vibrations
• Specific Belt-design for maximum longitudinal flexibility
• Temperature range: -18ºC to +80ºC
DIMENSIONS
PRODUCT

Application:
Variable speed pulley drives requiring exact speed control and maximum range of speed changes.
They are ideal for recreational equipment, agricultural applications and machine tools.

4
 WRAP BELTS

®
HARVESTER AGRICULTURAL BELTS
®
HARVESTER HARVESTER BELTS
Top Manufacturing
Thickness Angle Length
Section Width Range
(mm) (Degree) Designation
(mm) Min. Max.
900" Li
RAW EDGE COGED BELTS

B (17x11) 17.0 11.0 40 16"

19x11 19.0 11.0 40 41.6" 155" Li
20x12.5 20.0 12.5 40 31.4" 900" Li
22x11 22.0 11.0 40 62" 354" Li
C (22x14) 22.0 14.0 40 31" 900" Li
22x16 22.0 16.0 40 68" 258" Li
25x16 25.0 16.0 40 57" 900" Li
25x13 25.0 13.0 30 42.5" 354" Li
30x12 30.0 12.0 30 37.4" 260" Li
32x15 32.0 16.0 34 43.7" 322" Li
38x18 38.0 18.0 30 56” 358" Li
40x20 40.0 20.0 30 68" 259" Li
RIBBED / POLY V-BELTS

45x20 45.0 20.0 30 60" 345" Li

50x20 50.0 20.0 34 71" 374" Li
55x22 55.0 22.0 30 72" 259" Li
60x25 60.0 25.0 30 73" 259" Li
68x24 68.0 24.0 32 100" 356" Li

®
HARVESTER - AGF FLAT BELTS
70Fx4 70.0 4.0 - 68" 252" Li
80Fx4 80.0 4.0 - 68" 252" Li
30Fx6 30.0 6.0 - 110" 900" Li
50Fx6 50.0 6.0 - 39" 80" Li
75Fx6 75.0 6.0 - 106" 352" Li
80Fx6 80.0 6.0 - 77" 340" Li
TIMING BELTS

95Fx6 95.0 6.0 - 106" 315" Li

100Fx6 100.0 6.0 - 85" 352" Li
114Fx6 114.0 6.0 - 106" 317" Li
120Fx6 120.0 6.0 - 106" 317" Li
125Fx6 125.0 6.0 - 68" 252" Li
127Fx6 127.0 6.0 - 106" 317" Li
135Fx6 135.0 6.0 - 106" 342” Li
140Fx6 140.0 6.0 - 106" 342" Li
150Fx6 150.0 6.0 - 106" 317" Li
Note: Intermediate sizes are available upon request.
Features:
AUTOMOTIVE

• Specially designed for application with outside idlers

BELTS

• Highly flexible, suitable for small pulley diameters

• Higher power transmission than regular Belts
• Excellent performance under variable load conditions
• Temperature range: -18ºC to +80ºC

®
DUO DOUBLE SIDED BELTS
®
Duo - XS HEXAGONAL BELTS
Top Min. Manufacturing
Thickness Angle Length
Section Width Pulley Dia. Range
ACCESSORY

(mm) (Degree) Designation

PRODUCTS

(mm) (mm) Min. Max.

AA 13.0 10.0 40 80.0 46" 254" Li
BB 17.0 14.0 40 125.0 40" 900" Li
CC 22.0 17.0 40 224.0 73" 900" Li
25 25.0 22.0 40 280.0 88" 900" Li
DD 32.0 25.0 40 355.0 158” 900" Li

®
DUO -XS-N WRAP DOUBLE SIDED NOTCHED BELTS
N-CC 24.0 30.0 40 224.0 155” 900” Lp

Features:
DIMENSIONS

• Absolutely flexible
PRODUCT

• Transmit power from both the sides

• This special construction allows Belt to be used in “serpentine-drive" system, such as rice mills, textile mills
• Temperature range: -18ºC to +80ºC

5
 WRAP BELTS
ENFORCER ®-XS RICE HARVESTER BELTS
Top Mfg. Range Length
Section Thickness Desig.
Width Min. Max.
B 16.7mm 9.65mm 35” 239” Li
C 22.0mm 11.0mm 42” 354” Li

RAW EDGE COGED BELTS

Features:
• Higher power transmission capacity in comparison to regular belts
• Good mechanical strength
• Lowest elongation and slippage
• Lesser belt deformation, longer service life
• Reduced number of belts
• Antistatic, oil and heat resistant
• Suitable for applications comprising of high shock loads which is caused due to sudden start / stop of the machine
• Temperature range: -25°C to +100°C
Application: Rice harvesters

VALIANT ®-XS RICE HARVESTER BELTS

RIBBED / POLY V-BELTS

Top Mfg. Range Length
Section Thickness Desig.
Width Min. Max.
B 16.7mm 9.65mm 35” 239” Li
C 22.0mm 11.0mm 42” 354” Li
Features:
• Higher power transmission capacity in comparison to regular belts
• Good mechanical strength
• Crack & damage free in high temperature applications
• Antistatic, oil and heat resistant
• Suitable for applications where reverse idlers have to be used
• Extended temperature range: -25°C to +100°C

TIMING BELTS
Application: Rice harvesters

LawnMaster®-XS LAWN MOWER BELTS

Top Manufacturing
Thickness Angle Length
Section Width Range
(mm) (Degree) Desig.
(mm) Min. Max.
3L 9.65 5.59 40 10.5” 177” La
4L 12.7 7.87 40 15.0” 359” La
5L 16.7 9.65 40 21.0” 242” La
Note: Intermediate sizes and OEM parts are available upon request.

AUTOMOTIVE
Features:
• High tensile strength, non-extensibility, high resistance to shock loads

BELTS
• High resistance to wear and tear, reduced slippage while clutching
• Able to withstand high level of reverse flexing
• High resistance to oil, heat and cracking
• Temperature range: -18ºC to +80ºC
Application: Lawn & garden machinery

®
DryCover DRY COVER BELTS
®
DryCover - XS
ACCESSORY
PRODUCTS

Product Range:
Sections: A, B, C, D, SPZ, SPA, SPB, SPC, 3V, 5V, 8V, 3L, 4L, 5L
®
DryCover - HXS BANDED BELTS
Product Range:
Sections: HA, HB, HC, HD, HSPZ, HSPA, HSPB, HSPC, H3V, H5V, H8V
Features:
• Suitable for drives having clutch applications
• Designed for applications where contamination is not accepted
• Available in polyester and Kevlar®cord constructions
• Available in different colours - blue, green, brown, red, black & white
DIMENSIONS

• Temperature range: -18ºC to +80ºC

PRODUCT

Range: Entire range of wrapped Belts (Classical, Wedge, Narrow & Light Duty) Single, Banded and Varispeed
Application: Chemical, pharmaceuticals, food industry etc

6
 WRAP BELTS

®
X’tra RAW EDGE COGGED BELTS
CLASSICAL SECTION
Top Min. Manufacturing Belt Length Factor
Thickness Angle Length
Section Width Standard Pulley Dia. Range
(mm) (Degree) Lp to La Li to Lp Li to La Desig.
(mm) (mm) Min. Max. (mm) (mm) (mm)
ZX 10.0 6.0 36 IS 2494, BS 3790, ISO 4184 40.0 23.5" 200" 16 22 38 Li
RAW EDGE COGED BELTS

AX 13.0 8.0 36 IS 2494, BS 3790, ISO 4184 63.0 23.5" 200" 14 36 50 Li

BX 17.0 11.0 36 IS 2494, BS 3790, ISO 4184 90.0 23.5" 200" 26 43 69 Li
CX 22.0 14.0 36 IS 2494, BS 3790, ISO 4184 140.0 23.5” 200" 32 56 88 Li
DX 32.0 19.0 36 IS 2494, BS 3790, ISO 4184 280.0 40.0” 200” 40 79 119 Li

WEDGE SECTION
XPZ 10.0 8.0 36 BS 3790 56.0 600 mm 5100 mm 13 37 50 Lp
XPA 13.0 10.0 36 BS 3790 71.0 600 mm 5100 mm 18 45 63 Lp
XPB 17.0 14.0 36 BS 3790 112.0 600 mm 5100 mm 28 60 88 Lp
XPC 22.0 18.0 38 BS 3790 180.0 600 mm 5100 mm 30 83 113 Lp

NARROW SECTION
RIBBED / POLY V-BELTS

3VX 9.7 8.0 38 RMA IP 22 56.0 23.5" 200" 13 37 50 La

5VX 15.8 14.0 38 RMA IP 22 112.0 23.5” 200” 25 60 85 La
8VX 25.4 23.0 38 RMA IP 22 254.0 90" 200" 53 92 145 La

LIGHT DUTY SINGLE V-BELTS

2LX 6.30 4.00 36 RMA IP 23 25.0 23.5" 118" - - - La
3LX 9.65 5.59 36 RMA IP 23 36.0 23.5" 118" 16 22 38 La
4LX 12.70 7.87 36 RMA IP 23 58.0 23.5" 118" 14 36 50 La
5LX 16.70 9.65 36 RMA IP 23 72.0 23.5" 118" 26 43 69 La
Features:
• Oil resistant & antistatic
• Maximum Belt linear speed (Classical section: up to 30 m/sec, Wedge: up to 42 m/sec, Narrow: up to 45 m/sec)
• Higher power transmission capacity than Wrapped Belts
TIMING BELTS

• Superior transverse stiffness & high wear resistance

• Suitable for drives with small pulley diameters, high ambient temperature & speed
• Temperature range: -25ºC to +100ºC
• ATEX certified FRAS Belts are also available

Application: General engineering, all industrial Belts drives

Note: These sizes are indicative & denote minimum & maximum range. Intermediate sizes are available upon request.

®
DuraBand - XR BANDED BELTS
AUTOMOTIVE

(Reference Standards: ISO 5290, ISO 5291, BS 3790)

Top Manufacturing
BELTS

Thickness Angle Pitch Length

Section Width Range
(mm) (Degree) (mm) Desig.
(mm) Min. Max.
HAX 13.0 10.0 36 15.9 23.5" 200" Li
HBX 17.0 13.0 36 19.0 23.5" 200" Li
HCX 22.0 16.0 36 25.5 23.5" 200" Li
HXPZ 10.0 10.0 36 12.0 600 mm 5080 mm Lp
HXPA 13.0 12.0 36 15.0 600 mm 5080 mm Lp
HXPB 17.0 16.0 36 19.0 600 mm 5080 mm Lp
HXPC 22.0 20.0 36 25.5 600 mm 5080 mm Lp
H3VX 9.70 10.0 36 10.3 23.5" 200" La
ACCESSORY
PRODUCTS

H5VX 15.8 16.0 36 17.5 23.5" 200" La

Note: These sizes are indicative & denote minimum & maximum range. For Intermediate sizes please contact us
at “[email protected]”.
Features:
• Enhanced power transmission capacity up to 25%
• Lesser number of Belts required as compared to multiple single-Belt drive
• High adhesion strength between tie band and the Belts
• Eliminates chances of mismatch in length as observed in multiple single-Belt drive
• Antistatic, oil and heat resistant
• ATEX certified FRAS Belts are also available
• Temperature range: -25ºC to +100ºC
• Manufactured through single-stage-curing process
DIMENSIONS
PRODUCT

Application: Best suited for drives with severe vibrations, vertical shaft drives, V-flat drives, agricultural drives,
stone crushers, heavy duty compressors, generator sets, pumps, cold forging machines & mining equipment.

7
 WRAP BELTS
®
MUSCLE -XR3 HIGH POWER, MAINTENANCE-FREE BELTS
Mfg.
Length
Section Range
Designation
Min. Max.
XPZ 25” 118” Lp
XPA 29” 118” Lp

RAW EDGE COGED BELTS

XPB 35” 118” Lp
XPC 39” 118” Lp
3VX 24.5” 118” La
5VX 35.5” 118” La

Features:
• Exceptionally high power rating - up to 40% more than conventional standard V-belt
• High transmission efficiency up to 98% providing optimum output
• Maintenance free property of the belt ensures less machine downtime and an extended service life
• Complies with ISO 1813 - having antistatic property
• Temperature range from -35°C to +130°C allows the belt to perform even at increasing ambient temperatures
• Space saving potential - Lesser number of belts required
• REACH & RoHS compliant provides an eco-friendly system

RIBBED / POLY V-BELTS

• High dimensional stability offering the best wedging effect between the belt and the pulley flanges
• Increased performance due to the engineered belt design
• Smooth running operation
• Minimal belt tension loss
Application:
Wire rope manufacturing industry, steel industry, power plants, textile industry, pharmaceutical Industry, food
processing units

®
FRAS -XR FIRE RESISTANT ANTISTATIC BELTS
Product Range:
Sections: ZX, AX, BX, CX, XPZ, XPA, XPB, XPC, 3VX, 5VX, 8VX

TIMING BELTS
Features:
• Conforms to: II 2GD c IIB X (Test report no. IB-03-4-934) - ATEX
• Temperature range: -25°C to +100°C
• Ensures high level of protection against fire hazards
• Fire resistance test results of flame & glow time period is lower than the desired 5 seconds, maximum time as per
ATEX BS 3790 standard
Certified • ATEX values for electrical resistance are approximately 10-15 times more stringent than ISO 1813, leading to a
more safer drive
• Resistance to emit inflammable substances while in operation
• Damage free and crack resistance properties to ensure smooth operation
• Longer service life
• Dimensional stability

AUTOMOTIVE
• Antistatic, oil and heat resistant

BELTS
Applications: Coal mines, fire prone areas, petrochemical installations etc.

®
DUO DOUBLE SIDED BELTS
®
Duo - XV DOUBLE COG VARIABLE SPEED BELTS
Top Min. Manufacturing Range
Thickness Angle Length
Section Width Pulley Dia.
(mm) (Degree) Desig.
(mm) (mm) Min. Max.
13.0 - 85.0 10.0 to 30.0 22 to 40 - 23.5” 200” Li

®
ACCESSORY

Duo - XR HEXAGONAL DOUBLE COG BELTS

PRODUCTS

AAX 13.0 10.0 36º 70 39.5” 90.5” Li

BBX 17.0 14.0 36º 100 29.5” 98.0” Li
Features:
• Absolutely flexible
• Transmit power from both sides
• This special construction allows belt to be used in “Serpentine-drive" system e.g. rice mills
• Temperature range: -25ºC to +100ºC

RAW EDGE PLAIN & LAMINATED BELTS

®
X’tra - XP RAW EDGE PLAIN BELTS
DIMENSIONS
PRODUCT

®
X’tra - XL RAW EDGE LAMINATED BELTS
Standards, Dimensions & Product range: Same as Raw Edge Cogged Belts, given on page no. 7

8
 WRAP BELTS

®
X’tra - XV VARIABLE SPEED BELTS
(Reference Standards: RMA IP 25/1991)
Top Pitch Length Belt Length Factor
Thickness Angle
Section Width (mm)
(mm) (Degree) Lp to La Li to Lp Li to La
(mm) Min. Max. (mm) (mm) (mm)
22V-A22/1422V 22.0 8.0 22 815.0 1920.0 15.0 35.0 50
RAW EDGE COGED BELTS

30V-A22/1922V 30.0 10.0 22 920.0 3015.0 20.0 42.0 62

37V-A22/2322V 37.0 11.0 22 1036.0 3018.0 23.0 46.0 69
30V-A26/1926V 30.0 11.0 26 922.0 3018.0 23.0 46.0 69
46V-A26/2926V 46.0 13.0 26 1370.0 3198.0 27.0 55.0 82
51V-A26/3226V 51.0 13.0 26 1445.0 3375.0 27.0 55.0 82
40V-A30/2530V 40.0 15.0 30 1293.0 3198.0 30.0 65.0 95
51V-A30/3230V 51.0 16.0 30 1450.0 3380.0 33.0 67.0 100
70V-A30/4430V 70.0 18.0 30 1455.0 3385.0 37.0 77.0 114
64V-A36/4036V 64.0 18.0 36 1455.0 3385.0 37.0 77.0 114
70V-A36/4436V 70.0 18.0 36 1455.0 3385.0 37.0 77.0 114
76V-A36/4836V 76.0 19.0 36 1458.0 3388.0 39.0 81.0 120
RIBBED / POLY V-BELTS

(Reference Standards: ISO 3410:1989 (E) / ASAE S211-4)

HG 16.5 8.0 26 715.0 5100.0 15.0 35.0 50.0
HH 20.4 10.0 26 720.0 5100.0 20.0 42.0 62.0
HI 25.4 12.7 26 727.0 5100.0 27.0 55.0 82.0
HJ 31.8 15.1 26 730.0 5100.0 30.0 65.0 95.0
HK 38.1 17.5 26 737.0 5100.0 37.0 77.0 114.0
HL 44.5 19.8 26 740.0 5100.0 40.0 82.0 122.0
HM 50.8 22.2 26 745.0 5100.0 45.0 90.0 135.0
HN 57.2 23.9 26 750.0 5100.0 50.0 100.0 150.0
HO 63.5 25.4 26 753.0 5100.0 53.0 106.0 159.0

Non-standard sections
6.00 to 5.00 to 30.00 22 to 40 23.5”Li
TIMING BELTS

- 200” Li
85.00
Note: Raw Edge Plain & Raw Edge Laminted Belts can be made on request. These sizes are indicative
& denote minimum & maximum range. For intermediate sizes please contact us at “[email protected]”.
Features:
• Excellent transverse rigidity and flexibility to prevent bucking at minimum diameter settings where Belt
stress is more
• Firm-gripping-action in the contact areas provide positive traction for precise, immediate response
• Higher power transmission than regular Belts
• Longer service-life
• Facilitates smooth running without excessive vibrations
• Specific Belt-design for maximum longitudinal flexibility
• Temperature range: -25ºC to +100ºC
AUTOMOTIVE

Application: Variable speed pulley drives requiring exact speed control and maximum range of speed
BELTS

changes. They are suitable for recreational equipment, agricultural applications and machine tools.

®
HARVESTER - XV AGRICULTURAL BELTS
Product Range:
Sections: 22V-A22/1422V, 30V-A22/1922V, 37V-A22/2322V, 30V-A26/1926V, 46V-A26/2926V,
51V-A26/3226V, 40V-A30/2530V, 51V-A30/3230V, 70V-A30/4430V, 64V-A36/4036V, 70V-A36/4436V,
76V-A36/4836V, HG, HH, HI, HJ, HK, HL, HM, HN, HO

Features:
• Specially designed for application with outside idlers
• More flexible, suitable for small pulley diameters
ACCESSORY
PRODUCTS

• Higher power transmission than regular Belts

• Excellent performance under variable load conditions
• Temperature range: -25ºC to +100ºC

®
WhiteKnight SNOWMOBILE BELTS
Features:
• Excellent performance under high horse-power load
• Kevlar®cord construction for longer life
• Can withstand temperature up to -40ºC to +100ºC
DIMENSIONS

• Reduced slippage
PRODUCT

• Available in single side & double side cog profile

Product range: HD / HDX / XDX Series

9
 WRAP BELTS
®
ASYMMETRA ASYMMETRIC BELTS
Top Manufacturing Range
Thickness Length
Width (mm)
(mm) â Desig.
(mm) á Angle Angle Min. Max.
16.0 10.0 18 2 680 2240 La
19.0 10.0 18 2 680 2240 La

RAW EDGE COGED BELTS

Features:
• Torque converter systems
• High lateral-rigidity & tough
• Longer life
• Excellent shock absorbing capacity
• Temperature range: -25ºC to +100ºC
Application: Golf-cart, snowmobiles, mini-bikes, material handling & industrial equipment

PowerTex®- XV2 TEXTILE MACHINERY BELTS

Section Length Designation

RIBBED / POLY V-BELTS

X62x22I-K-1745 Li
X70x22I-K-1700 Li
X70x22I-K-1800 La
X70x30I-K-1810 La
Note: Other sizes are available on request.
Features:
• Designed to meet high power transmission requirement for textile spinning mills of up to 60 kW
• Developed for spinning mills to operate at spindle with very high speed of up to 20000 RPM
• Higher power transmission capacity
• Excellent performance & customer satisfaction by giving energy saving solutions in textile spinning application
• Temperature range: -25ºC to +100ºC

TIMING BELTS
®
TITAN -XR RICE HARVESTER BELTS
Top Mfg. Range Length
Section Thickness Desig.
Width Min. Max.
BX 17.0mm 11.0mm 30” 90” Li
CX 22.0mm 14.0mm 30” 90” Li
Features:
• Higher power transmission capacity in comparison to regular belts
• High efficiency up to 98%
• Suitable for heavy duty, high speed applications

AUTOMOTIVE
• Maintenance free
• Extended service life & less machine down-time

BELTS
• Antistatic, complies with ISO 1813
• Oil and heat resistant
• Drives with very small pulley diameters
• Temperature range: -25°C to +130°C
Application: Rice harvesters

®
DOMINATOR -XR RICE HARVESTER BELTS
Top Mfg. Range Length
Section Thickness Desig.
Width
ACCESSORY

Min. Max.
PRODUCTS

BX 16.5mm 10.0mm 30” 90” Li

CX 22.0mm 11.0mm 30” 90” Li
Features:
• Extremely high power transmission capacity
• Highest tensile strength
• Lowest elongation and slippage
• Suitable for higher speeds
• Drives with very small pulley diameters
• Better performance in applications comprising of high shock loads
• Greater lateral rigidity & longitudinal flexibility
DIMENSIONS

• Antistatic, oil and heat resistant

PRODUCT

• Temperature range: -25°C to +100°C

Application: Rice harvesters

10
 WRAP BELTS

X’ceed ® RIBBED / POLY V-BELTS (Reference Standards: RMA IP-26, ISO 9981-82)
Min. Manufacturing
Thickness Rib Pitch No. of Ribs Length
Section Pulley Dia. Range
(mm) (mm) Possible Desig.
(mm) Min. (mm) Max.
PH 2.9 1.60 2 to 280 13.0 356 3000 Le
PJ 3.8 2.34 2 to 235 20.0 280 5080 Le
RAW EDGE COGED BELTS

PK 4.5 3.56 2 to 150 50.0 280 5080 Le

PL 7.6 4.70 2 to 110 75.0 500 5080 Le
PM 13.3 9.40 2 to 52 180.0 950 5080 Le
Note: These sizes are indicative & denote minimum & maximum range. For Intermediate sizes please
contact us at “[email protected]”.
Features:
• Oil resistant & antistatic
• High power transmission capacity
• Temperature range: -25ºC to +100ºC
• Maximum Belt linear speed up to 50 m/sec
• Highly flexible, noise free & smooth running
• Can be used for speed ratios up to 1:30
• ATEX certified FRAS Belts are also available
RIBBED / POLY V-BELTS

Application:
Compact drives with high speed ratios, drives requiring minimum maintenance, drives in a noise
sensitive environment, for serpentine drives and drives with reverse bend idlers like household
appliances, work tools, machine tools etc.

®
FRAS -XC FIRE RESISTANT ANTISTATIC BELTS
Product Range:
Sections: PJ, PK, PL, PM
Features:
• Fire resistant, antistatic, electrical resistance values are most stringent than ISO 1813,
fulfills requirement according to pr-EN 13464-5:2003 & ISO 9563:1990, ATEX certified
• Temperature range: -25ºC to +100ºC
TIMING BELTS

ATEX
Certified Applications: Coal mines, fire prone areas, petrochemical installations etc.

®
THERMAL - XC HIGH TEMPERATURE BELTS
Product Range:
Sections: PJ, PK, PL

Features:
• Temperature range: -35ºC to +130ºC
• High temperature resistant
• Longer service life
AUTOMOTIVE

• Crack & damage free in high temperature applications

BELTS

®
DUO -XC DOUBLE SIDED BELTS
Product Range:
Sections:
DPK: 2 to 13 ribs
DPL: 2 to 11 ribs
ACCESSORY

Manufacturing Range:
PRODUCTS

DPK Section: 1195 mm to 3105 mm

DPL Section: 1200 mm to 3105 mm

Temperature range: -25ºC to +100ºC

Note: Besides 11 ribs, DPL section Belt can be provided with 22 ribs for the range 1500 mm to 3000 mm

Application: High speed engines, serpentine drives, textile machineries etc.

®
ELASTO - XC ELASTICATED RIBBED / POLY V-BELTS
Section: EL -PJ : 2 to 20 ribs
Range: 280mm to 2240mm
Features:
DIMENSIONS
PRODUCT

• Belt with elastic properties

• Temperature range: -25ºC to +100ºC
Application: Washing machine & dryers.

11
 WRAP BELTS
®
TopCoat -XC PACKAGING MACHINERY BELTS
Features:
• Profile top rubber, specific to applications
• Facilitates excellent cushioning coupled with extra elasticity
• Excellent flexibility to prevent cracks or tearing
Shore hardness: 45 • Optimum friction suitable for providing proper support to contact material

RAW EDGE COGED BELTS

(Red Colour) • Vulcanized as a single piece to ensure excellent adhesion
• Abrasion resistant
• Longer life
• Top profile thickness: 1.5mm, 3mm, 6mm, 8mm & 10mm

Temperature Range: -18ºC to +80ºC

Product Range:
Sections:
PJ: up to 36 ribs
PK: up to 24 ribs
PL: up to 18 ribs
Shore hardness: 50 Manufacturing Range:
(Coral Colour)

RIBBED / POLY V-BELTS

PJ Section: 700 mm to 2000 mm
PK Section: 700 mm to 2000 mm
PL Section: 700 mm to 2000 mm
Application: FFS (Form-fill & seal) machine, bakery, paper & printing, soaps & cosmetics, cable-drawing,
plastic tube drawing, bottling plants etc

Note:
1. Belt selection should strictly be done on the basis of temperature, top coat hardness & application
2. Availability of a particular size in product range to be cross checked before placing the order
®
X’act TIMING / SYNCHRONOUS BELTS
X’act CT CLASSICAL TIMING BELTS
®

Tooth Belt Belt label description:

TIMING BELTS
Pitch Manufacturing Length
Section Height Thickness 270 XL 025
(mm) Range Desig.
(mm) (mm)
270 XL 025
MXL 2.032 0.59 1.14 21MXL to 1771MXL Lp
Pitch Section Belt
XXL 3.175 0.76 1.52 50XXL to 219XXL Lp Length (Tooth pitch Width
XL 5.080 1.27 2.30 44XL to 2128XL Lp 27” 5.080 mm) 0.25”

L 9.525 1.91 3.60 67L to 2700L Lp Maximum sleeve width is available up to

450 mm
H 12.700 2.29 4.30 145H to 2720H Lp
XH 22.225 6.35 11.20 463XH to 2275XH Lp
XXH 31.750 9.53 15.70 625XXH to 2000XXH Lp
(Standard: BS 4548, ISO 13050, ISO 5296, DIN 7721)
®
X’act STD STD TIMING BELTS Belt label description:

AUTOMOTIVE
S 2M 2.00 0.76 1.36 STD S 2M 60 to STD S 2M 3700 Lp STD 150 S 5M 650

BELTS
S 3M 3.00 1.14 2.20 STD S 3M 120 to STD S 3M 6510 Lp STD 150 S 5M 650
S 5M 5.00 1.91 3.40 STD S 5M 150 to STD S 5M 4000 Lp
Belt Section Pitch
S 8M 8.00 3.05 5.30 STD S 8M 376 to STD S 8M 6640 Lp Top Width (Tooth pitch Length
15 mm 5.0 mm) 650 mm
S 14M 14.00 5.30 10.20 STD S 14M 714 to STD S 14M 5012 Lp
Maximum sleeve width is available up to
(Standard: BS 4548, ISO 13050, 5296, DIN 7721) 450 mm
®
X’act - HTD HTD TIMING BELTS
Belt label description:
2M 2.00 0.75 1.36 52 2M to 750 2M Lp
3M 3.00 1.17 2.40 60 3M to 6804 3M Lp 800 8M 30
Lp 800 8M 30
5M 5.00 2.06 3.80 180 5M to 3750 5M
8M 8.00 3.48 6.00 184 8M to 6880 8M Lp Pitch Section Belt
ACCESSORY
PRODUCTS

Length (Tooth pitch Width

14M 14.00 6.02 10.00 812 14M to 8120 14M Lp 800 mm 8.0 mm) 30 mm
(Standard: BS 4548, ISO 13050, 5296, DIN 7721) Maximum sleeve width is available up to
Features: 450 mm
• High efficiency due to positive engagement between Belt teeth and pulley grooves
• Maintenance-free, no re-tensioning & high tension required
• Fibre glass cord provides strength, excellent flex life & high resistance to elongation
• Exact power transmission
• Low noise level & longer service life
• Improved stress distribution
• Temperature range: -25ºC to +80ºC

Application:
Suitable for drives demanding exact power transmission such as robotic machines, textile machinery, CNC
DIMENSIONS
PRODUCT

machines, electronic equipment such as printers, scanners, currency counting machines etc.

Note: These sizes are indicative & denote minimum & maximum range. For Intermediate sizes please contact us at
“[email protected]”.
12
 WRAP BELTS

®
DUO - XT DOUBLE SIDED TIMING BELTS
Tooth Belt
Pitch Manufacturing Length
Section Height Thickness
(mm) Range Desig.
(mm) (mm)
DA-XL 5.080 1.27 3.05 200 DA-XL to 580 DA-XL Lp
DA-L 9.525 1.91 4.58 187 DA-L to 660 DA-L Lp
DA-H 12.700 2.29 5.96 200 DA-H to 2720 DA-H Lp
RAW EDGE COGED BELTS

DA-3M 3.000 1.17 3.10 501 DA-3M to 1401 DA-3M Lp

DA-5M 5.000 2.06 5.26 400 DA-5M to 2050 DA-5M Lp
DA-8M 8.000 3.40 8.17 512 DA-8M to 4400 DA-8M Lp
DA-14M 14.000 6.02 14.8 1400 DA-14M to 6860 DA-14M Lp
DA-S5M 5.000 1.92 5.00 410 DA-S5M to 1420 DA-S5M Lp
DA-S8M 8.000 3.05 7.50 512 DA-S8M to 6640 DA-S8M Lp
Features:
• Power transmission from both sides
• Highly flexible
• Free from maintenance
• Extended stability, durability, strength and life
• Temperature range: -25ºC to +80ºC
RIBBED / POLY V-BELTS

Application: For serpentine drives like in textile, paper packaging & printing industries, hand-held power tools, postage
handling, food processors, office equipment, money handling, medical diagnostic, ticket dispensers, robotics, vending
machines and vacuum cleaners.

Note: These sizes are indicative & denote minimum & maximum range. For Intermediate sizes, please contact us at
“[email protected]”.
®
X’pedient - XT POLYURETHANE BELTS
Tooth Belt
Pitch Manufacturing Length
Section Height Thickness
(mm) Range Desig.
(mm) (mm)
T5 5.0 1.20 2.20 T5-120 to T5-1955 Lp
AT5 5.0 1.20 2.70 AT5-225 to AT5-2000 Lp
T10 10.0 2.50 4.50 T10-250 to T10-3330 Lp
TIMING BELTS

AT10 10.0 2.50 4.50 AT10-250 to AT10-2350 Lp

Note: These sizes are indicative & denote minimum & maximum range. For Intermediate sizes please contact us at
“[email protected]”
Features:
• Polyurethane timing Belts are highly flexible with longitudinal toughness to ensure perfect tooth meshing
• No dust-generation or flaking while running - clean Belt
• Homogeneous throughout its cross-section by virtue of thermoset moulding process
• Superior wear and abrasion resistance
• High resistance to oil, fat and grease
• Excellent resistance to ageing, hydrolysis, UV and ozone
• Low vibration and reduced noise level
• Good resistance to most acids and alkalis
AUTOMOTIVE

Operating temperature range: -30ºC to +80ºC (up to +110ºC for a short period)
BELTS

Application: Office automation equipment and vending machines, machine tools and pumps, textile machines, paper
making machines and printing machinery, medical equipment, optical instruments, food processing equipment,
packaging machinery, robotics and plotters.

®
BRUTE - XT HIGH POWER BELTS
Tooth Belt
Pitch Manufacturing Length
Section Height Thickness
(mm) Range Desig.
(mm) (mm)
5M 5.00 2.06 3.80 300 5M to 2250 5M Lp
ACCESSORY

8M 8.00 3.48 6.00 424 8M to 4400 8M Lp

PRODUCTS

14M 14.00 6.02 10.00 966 14M to 4578 14M Lp

S5M 5.00 1.91 3.40 S5M 375 to S5M 2525 Lp
S8M 8.00 3.05 5.30 S8M 376 to S8M 2848 Lp
Features:
• Enhanced power rating up to 50% more than regular Timing Belts
• High performance Belts for higher loads & high speeds drives
• Quiet performance
• Highly flexible and provides dimensional stability
• Increased operational efficiency and Belt life
• Compact, lower operational costs
• Maintenance-free
DIMENSIONS

Temp. Range: -25ºC to +100ºC

PRODUCT

Application: Food processing, packaging, paper machines, printing machines, robotic equipment, conveyors, office
equipment, medical equipment.

13
 WRAP BELTS
®
TopCoat -XT PACKAGING MACHINERY BELTS
Features:
• Profile top rubber, specific to applications
• Excellent cushioning coupled with extra elasticity
• Excellent flexibility prevents cracking or tearing
• Optimum friction suitable for providing proper support to contact material
Shore hardness: 55 • Vulcanized as a single piece to ensure excellent adhesion
(Magenta Colour)

RAW EDGE COGED BELTS

• Belts are designed with abrasion resistance properties
• Longer life

Temperature Range: -18ºC to +80ºC

Product Range: L, H & 14M sections

Manufacturing Range:
L Section: 530 mm to 2000 mm, H Section: 530 mm to 2000 mm & 14M Section: 966 mm to
1960 mm

Application: FFS (Form-fill & seal) machine, bakery, paper & printing, soaps & cosmetics, cable-
drawing, plastic tube drawing, bottling plants etc.
Shore hardness: 70 Sections: L & H

RIBBED / POLY V-BELTS

(Black Colour) Top Profile Top Width Range (mm)
Thickness
(mm) Min Max
6.0 18.0 450
8.0 20.0 450
10.0 25.0 450
Note:
1. Belt selection should strictly be done on the basis of temperature, top coat hardness & application.
2. Availability of particular size in product range to be cross checked before placing an order
®
BRAWN -XT POLY+TIMING BELTS
Features:
• Combines the advantages of Synchronous and Poly V-Belts

TIMING BELTS
• Transverse teeth for positive engagement on one side and longitudinal ribs for non-synchronous
frictional transmission on other side.
• Suitable for multi-shaft transmission with reversed rotary directions of pulleys
• Antistatic, oil and heat resistant
• Noise-free transmission
• Operating temperature range -25ºC to +100ºC

Standard: PIX Proprietary

Reference standards: RMA / MPTA IP-26, BS 4548, ISO 13050

Application: Flour & rice mills, food-grain industries

AUTOMOTIVE
Range: 8M & S8M timing sizes with PK & PL Poly section. Other sizes are available on request.

BELTS
®
VANQUISH HEAVY EARTH-MOVING MACHINERY BELTS
Features:
• High modulus and stabilised stiff polyester cord
• Polychloroprene based compound for antistatic properties
• Fibre reinforced based compound for improved transverse stiffness
• Oil and heat resistant, capable to withstand high ambient temperature
• Recommended to be used on small pulley diameter and high speed
• Capable to perform in extremely dusty environment
ACCESSORY
PRODUCTS

• Capable to withstand shock loads, normally encountered in heavy duty applications

• Also available in Kevlar®cord construction

Product Range:
Wrap Construction Belts: SPZ, SPA, SPB, SPC, 3V, 5V, 8V,
Raw Edge Cogged Belts: XPZ, XPA, XPB, XPC, 3VX, 5VX, MX, TX, ZX, AX, BX, CX, X11A,
X13A, X15A, X17A, X20A, X23A, AVX10, AVX13
Ribbed / Poly V-Belts: PK
• Available in Kevlar®and maintenance-free cord constructions on request

Application: Bulldozers, military engineering vehicles, excavators, backhoe loaders, harvester,

DIMENSIONS

construction & mining trucks, loaders, forklift trucks, underground mining equipment, dump
PRODUCT

trucks etc.

14
 WRAP BELTS

AUTOMOTIVE BELTS
®
- FORCE AUTOMOTIVE WRAP BELTS
Top Manufacturing
Thickness Angle Length
Section Width Range
(mm) (Degree) Designation
(mm) Min. (mm) Max.
9.5 / AV 10 9.50 8.0 40 375 4010 La
RAW EDGE COGED BELTS

12.5 / AV 13 12.50 10.0 40 588 9130 La

Features:
• Excellent performance
• Abrasion resistant and offers smooth running
• Made up of high tensile polyester cord which enables maximum power transmission
• Less deformation
• Minimum elongation
• Temperature range: -18ºC to +80ºC
• Conforms to BS AU 150b, SAE J 636, JASO E 107
®
- FORCE AUTOMOTIVE RAW EDGE COGGED BELTS
Top Manufacturing
Thickness Angle Length
Section Width Range
(mm) (Degree) Designation
(mm) Min. (mm) Max.
RIBBED / POLY V-BELTS

X9.5 / AVX10 10.0 8.0 36 600 5100 La

X12.5 / AVX13 13.0 10.0 36 600 5100 La
X10A 10.5 8.0 36 600 3000 Le
X11A 11.5 8.0 36 600 3000 Le
X13A 13.5 9.0 36 600 3000 Le
X15A 17.0 10.5 38 600 3000 Le
X17A 18.5 11.0 36 600 3000 Le
X20A 21.5 12.5 36 600 3000 Le
Features: * Available in high temperature EPDM construction also
• Best suited for next-generation high speed engines
• Cogged profile offers higher flexibility
• Offers higher power transmission on smaller pulley diameters
• Engineered and chemically treated modulus & low stretch tensile cords for higher loads without stretch
TIMING BELTS

• Compounded for better grip and lateral rigidity

• Excellent resistant to oil and heat
• Suitable for HEMM (Heavy earth-moving machinery) applications
• Conforms to BS AU 150b, SAE J 636, JASO E 107
• Temperature range: -25ºC to +100ºC
®
- FORCE AUTOMOTIVE RIBBED BELTS
Min. Manufacturing
Thickness Rib Pitch Length
Section Pulley Dia. Range
(mm) (mm) Designation
(mm) Min. (mm) Max.
PK 4.5 3.56 50 280 5080 Le
* Available in high temperature EPDM construction also
Features:
AUTOMOTIVE

• Trapezoid faced ribs on a fibre reinforced rubber matrix for higher power transmission offering good
BELTS

resistance to wear and tear, facilitating quiet running

• Reduced vibrations, shock absorber, low stretch and an excellent behaviour under heavy load conditions
• Extremely flexible, capable to work on small pulley diameters and serpentine drives
• Oil and heat resistant, longer service life, suitable for HEMM applications
• Conforms to ISO 9981, 9982, RMA IP 26 standards
• Temperature range: -25ºC to +100ºC

- FORCE AUTOMOTIVE TIMING BELTS

®

Tooth Belt
Pitch Manufacturing
Section Height Thickness
(mm) Range
(mm) (mm)
ZA 9.525 1.91 4.10 88 ZA, 104 ZA, 111 ZA
ACCESSORY
PRODUCTS

ZB 9.525 2.29 4.50 137 ZB

ZH 9.525 3.50 5.50 89 ZH, 97 ZH, 129 ZH, 138 ZH, 153 ZH
PR 9.525 3.45 5.50 136 PR
PRM 9.525 3.37 5.50 97 PRM, 123 PRM, 124 PRM
PRP 9.525 3.50 5.50 177 PRP, 185 PRP
YU 8.000 3.02 5.20 101 YU, 106 YU, 107 YU, 109 YU, 115 YU
* Available in high temperature HSN construction also.
Features:
• Trapezoidal tooth design for sections ZA, ZB and curvilinear tooth design for other sections
• Precisely formed and accurately spaced teeth ensure smooth engagement with pulley grooves
• Fibre glass tensile cords provide strength, excellent flex life and high resistance to elongation
• Durable backing protects against environmental pollution and friction wear
DIMENSIONS
PRODUCT

• Tough nylon surface protects the tooth surface

• Conforms to ISO 9010 / JASO E 105
• Temperature range: -25ºC to +100ºC

15
 WRAP BELTS
ACCESSORY PRODUCTS

DIGITAL TENSION METER ANALOG TENSION TESTER

PIX Digital version of tension meter Manual tool meant for correcting
is used to correct the tension or re-tensioning the drive with

RAW EDGE COGED BELTS

factor in a drive, thus helping the adequate reliability.
users' to attain the optimum Belt
tension.
This equipment works on frequency
measurement phenomenon.

PULLEY GAUGES BELT PROFILE GAUGE

PIX Pulley Gauges are specially Used for checking the Belt profile,
designed for checking the profiles of angle for Wrapped Belts of all the

RIBBED / POLY V-BELTS

the grooves of various conventional sections.
and dual section pulleys.

LASER GUIDED PULLEY LENGTH MEASURE

ALIGNMENT INSTRUMENT Used for checking the length
where size on the Belt is not
Robust and highly effective clearly visible.
maintenance tool, used to correct
the misalignment of pulleys in a drive,

TIMING BELTS
Available in conventional, dual and
to help the user to obtain the flat pulley constructions.
maximum service life of the Belt.

DRIVE DESIGN SOFTWARE PRODUCT KIT

AUTOMOTIVE
Software for designing the drive / Belt display kit for sales team.
drive solutions for Wrap, Raw edge Comprises of 14 Belts of various

BELTS
cogged Belts, Poly V-Belts & Timing types. Features Belts for various
Belts application based on the
requirement.

MAINTENANCE CHART
ACCESSORY
PRODUCTS

BELT STAND
Table-top metallic Belt display rack,
can hold up to 60 Belts.

Dimensions (mm):
1200 (l)x450(b)x500(h)

Comprises of maintenance tips which helps

in maintaining healthy condition of the drive.
DIMENSIONS
PRODUCT

16
 WRAP BELTS

PRODUCT DIMENSIONS
WRAPPED / RAW EDGE COGGED BELTS
8 10 13 17 20 22 25

5 6 8
RAW EDGE COGED BELTS

11 13 14 16
8 Z / ZX
Section Section A / AX
Section B / BX
Section 20 Section
C / CX
Section 25 Section

32 38

19
23

D / DX Section
RIBBED / POLY V-BELTS

CLASSICAL SECTION E Section

All dimensions are in mm

10 13 17 19 22 9.7 15.8 25.4

8 10 8
14
15 14 23
SPZ / XPZ 18 3V / 3VX
Section SPA / XPA SPB / XPB Section
Section 19
Section
Section 5V / 5VX
SPC / XPC Section 8V / 8VX
Section Section

WEDGE SECTION All dimensions are in mm NARROW SECTION All dimensions are in mm
TIMING BELTS

13 17 22
10

8.5 10 13 16
10.3 15.9
19.0
25.5
HZ HA / HAX HB / HBX
Section Section HC / HCX
Section Section
32 10 13
AUTOMOTIVE

17
BELTS

10 12
21.5 16
12.0 15.0
19.0
37.0
HD HSPZ / HXPZ HSPA / HXPA HSPB / HXPB
Section Section Section Section

9.7 15.8 25.4

22

10
20 25
16
10.3
25.5
ACCESSORY

28.6
PRODUCTS

H3V / H3VX 17.5

HSPC / HXPC Section
Section H5V / H5VX H8V
Section Section

BANDED BELTS All dimensions are in mm

LIGHT DUTY / LAWNMASTER

16.7
6.3 9.65 12.7

4.0 5.59 7.87 9.65

DIMENSIONS
PRODUCT

2LX 3L / 3LX 4L / 4LX 5L / 5LX

Section Section Section Section
All dimensions are in mm

17
 WRAP BELTS
PRODUCT DIMENSIONS
HEXAGONAL BELTS RIBBED / POLY V-BELTS
17 22 3.56 4.7 9.4
13 1.6 2.34

2.9

3.8

4.5

7.6
10 13.3

RAW EDGE COGED BELTS

14 17
PH PJ PK PL PM
AA Section Section Section Section Section
Section BB
Section CC
Section All dimensions are in mm
25 32

STD SECTION
22 25

1.36 0.76 2.20 1.14

25 DD 2.00 3.00
Section Section

RIBBED / POLY V-BELTS

S 2M Section S 3M Section
All dimensions are in mm

3.40 1.91 5.30 3.05

TIMING BELTS: CLASSICAL SECTION 5.00

S 5M Section
8.00
S 8M Section

1.14 0.59 1.52 0.76

10.20 5.30
2.032 3.175
MXL Section XXL Section 14.00
S 14M Section All dimensions are in mm
2.30 1.27 3.60 1.91
5.080 DOUBLE SIDED TIMING BELTS

TIMING BELTS
9.525
XL Section L Section

3.05 4.58
4.30 2.29 11.20 6.35 1.27 1.91
12.700 22.225 5.080 9.525
H Section XH Section DA-XL Section DA-L Section

15.70 9.53

31.750 5.96
XXH Section 3.10
All dimensions are in mm 2.29
1.17

AUTOMOTIVE
12.700
DA-H Section 3.00

BELTS
DA-3M Section
HTD SECTION
5.26
8.17
1.36 0.75 2.40 1.17 2.06
3.40
2.00 3.00 5.00
2M 3M DA-5M Section 8.00
SECTION SECTION DA-8M Section
ACCESSORY
PRODUCTS

3.80 2.06 6.00 3.48 14.8 5.00

5.00 8.00 6.02

1.92
5M 8M
SECTION SECTION 14.00 5.00
DA-14M Section DA-S 5M Section

10.0 6.02 7.50

14.00 3.05
14M
SECTION 8.00
DIMENSIONS

DA-S 8M Section
PRODUCT

All dimensions are in mm All dimensions are in mm

18
Corporate Office & Works
PIX TRANSMISSIONS LIMITED
J-7, M.I.D.C. Hingna Road,
Nagpur - 440 016. Maharashtra. India
Tel.: +91-(0)-7104 669 000
Fax: +91-(0)-7104 669 007/8
E-mail: [email protected]
Website: www.pixtrans.com

Overseas Offices
PIX Transmissions (Europe) Limited
12, Sterling Complex, Farthing Road,
Ipswich, Suffolk IP1 5AP
United Kingdom
Tel.: +44 (0) 1473-743 511
Fax : +44 (0) 1473-742 227
E-mail: [email protected]
Website: www.pixtranseu.com

PIX Germany GmbH

Karl-Schurz-Str. 35,
33100 Paderborn,
Germany
Tel.: +49 (0) 5251-2844 070
Fax: +49 (0) 5251-2844 099
E-mail: [email protected]
Website: www.pixgermany.com

PIX Middle East Trading LLC

P. O. Box 238085, Al Quasis Ind-2,
Near RAK Bank, Dubai, U.A.E.
Tel.: +971-4-2345 100
Fax: +971-4-2345 101
E-mail: [email protected]
Website: www.pixme.ae

PIX Middle East FZC

P. O. Box No. 54526,
Technology Park 16/1,
R.A.K. Free Trade Zone,
Ras-Al-Khaimah,
United Arab Emirates
Tel.: +971-7-2444366
Fax: +971-7-2444367
E-mail: [email protected]
Website: www.pixme.ae
PIX Belt Catalogue / Oct 2015 / 2000