Scribd
Upload
311 views4 pages

Corbel

The corbel is designed to support an unfactored load of 300 kN. A bearing plate of length 150 mm is designed. The corbel dimensions are 300 mm wide, 750 mm total depth with an effective depth of 700 mm. Main reinforcement of 3 bars of 20 mm diameter are provided. Shear reinforcement of 3 bars of 8 mm diameter at 125 mm c/c are provided vertically. 4 bars of 10 mm diameter as horizontal shear reinforcement at 150 mm c/c are provided up to 2/3rd of the effective depth. Development length for 20 mm bars is provided as 1220 mm.

Uploaded by

Anand Soni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
311 views4 pages

Corbel

The corbel is designed to support an unfactored load of 300 kN. A bearing plate of length 150 mm is designed. The corbel dimensions are 300 mm wide, 750 mm total depth with an effective depth of 700 mm. Main reinforcement of 3 bars of 20 mm diameter are provided. Shear reinforcement of 3 bars of 8 mm diameter at 125 mm c/c are provided vertically. 4 bars of 10 mm diameter as horizontal shear reinforcement at 150 mm c/c are provided up to 2/3rd of the effective depth. Development length for 20 mm bars is provided as 1220 mm.

Uploaded by

Anand Soni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

: Design of Corbel :

P = 300 kN
: INPUT :
a: 200
B= 300 mm
D= 300 mm
a= 200 mm
fck = M30 N/mm2
fy = Fe415 N/mm2 D
fbr = 13.5 N/mm2 300
Unfactored Load = 300 kN
τucmax = 3.5 N/mm2 : ELEVATION:
Col. Corbel B=
: DESIGN : 300
: PLAN :
1. Sizing of bearing plate :

Design ultimate force = 1.5 x 300 KN


= 450 KN

Required length of bearing plate = Vu/b/fbr ### mm


So, Length of bearing plate to be provide = 150 mm

2. Corbel section design:


Length of Corbel = 2 x length of bearing plate = 300 mm
Width of corbel (B) = Width of column =300.00 mm
Depth :
A) d ≥ (a/0.6) = 200/0.6 = 333.333 mm
and
B) d ≥ Vu/τucmax/b = 428.571 mm
Assume efective cover = 50 mm
So, Required total depth = 478.571 mm
So, Provided D = 750 mm
Effective depth Provided, d = 700 mm
*Effective depth should be preferably greater than 2a = 400mm to consider
Enhancement in shear strength Acc. To cl.40.5 of IS456:2000

Depth @ outer edge : 300

= D/2 = 375.00 mm
375
750

Design for Main steel :


Vu = 0.36 x fck x b x Xu x 200zu
a2+zu2
where, Zu = d-0.42 x Xu
By Solving above,
Xu= 417.3284
and Zu= 524.72207

So, Total tensile force = Tu = VuD x a/Zu


= 171.519 kN
Allowable tensile stress fst = fst = (d-Xu) x 0.0035 x (2 x 105)
Xu
### N/mm2
Required Ast @ Top of Corbel = Tu/fst
### mm2
Should not be greater than pt=1.3% of Bd = 2730 mm2 O.K.
Required Min. (0.4%) = 900 mm2
So, Provide Dia. Of bar 20 - 3 Nos.
+ - Nos.
+ - Nos.
Ast Provided = 942.478 mm2 O.K.
pt provided= 0.449 %

3. Shear Design :

i) For M 30 and pt = 0.449 % ,


τuc = 0.475 N/mm2
As a<2d ; Enhanced shear stength should be calculated according to Cl. 40.5 of
IS456:2000 .
Enhance τuc = τuc x 2d / a = 3.325 N/mm2
However, it must not be greater than τuc max = 3.5 N/mm2
so, Shear force to be resisted by concrete alone = τuc max x b x d
= 698.25 kN
Shear force to be resisted by Stirrups = -248.25 KN
Hence, Min. Shear reinforcement to be provided.

ii) Shear Reinforcement :


VERTICAL :
Considered Dia. Of bar= 8 mm

a) Min. As required = 0.4ab/0.87fy = ### mm2


b) Design As = ab(τv-2dτc/a)/0.87fy = =0 mm2

Spacing required = 136.66 mm C/C


Spacing provided = 125 mm C/C
Nos. required = 3 Nos.
HORIZONTAL :
Considered Dia. Of bar= 10 mm
Area of steel required = Ast(main)/2 = 471.239 mm2
(Cl. 28.2.3. ; IS 456:2000);
Spacing required = 155.56 mm
Spacing provided = 150 mm C/C
which is to be provided upto 2d/3 =466.67mm from the top of corbel.
Nos. required = 4 Nos.

4. Development Length :

Ld required = k φ = = 61 x 20
=1220 mm

5. Reinforcement detail :
200

300
Ld =1220 mm

3 - 20# 375 2d/3=466.67


+ -#
+ -#

750
8# - 125 C/C, 3 Nos.

10# - 150 C/C, 4 Nos.

You might also like