Scribd
Upload
40 views1 page

Procedure: Configuration of IP Address

This document provides a 7-step procedure for configuring the IP address on a Windows computer. It instructs the user to open the Control Panel, select Network Connections, right click the Local Area Connection icon, select Properties, double click Internet Protocol Version 4, select Use the following IP address, and enter the IP address and subnet mask. For example, an IP address could be 192.168.40.1 with a subnet mask of 255.255.255.0.

Uploaded by

Kamala Nathan E
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
40 views1 page

Procedure: Configuration of IP Address

This document provides a 7-step procedure for configuring the IP address on a Windows computer. It instructs the user to open the Control Panel, select Network Connections, right click the Local Area Connection icon, select Properties, double click Internet Protocol Version 4, select Use the following IP address, and enter the IP address and subnet mask. For example, an IP address could be 192.168.40.1 with a subnet mask of 255.255.255.0.

Uploaded by

Kamala Nathan E
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Procedure:

Configuration of IP Address
1. Click on Start menu.
2. Select the Control Panel.
3. Then select Network Connections.
4. From the Network Connections window, you will see Local Area Connection.
Double click on that icon or click right mouse and go to the properties. Now, you
will click the Properties from the Local Area Connection Status Window.
5. After clicking Properties options, another Local Area Connection Properties
window will be opened. From the Local Area Connection Properties window
selects Internet Protocol (TCP/IP) and double clicks on it.
6. After double clicking, you will find Internet Protocol (TCP/IP) Properties.
7. Now, select Use the following IP address and put the IP address, Subnet mask.
For example, my PC is connected to my campus LAN. The IP may be
192.168.40.1, Subnet mask may be 255.255.255.0.

You might also like