CN LAB MANUAL CSE DEPARTMENT B.

TECH III CSE 1

Ibrahimpatnam, Hyderabad-501 506

LAB MANUAL
Computer Networks

Date of Issue Compiled by

and Authorized
Document No: 06-April-2018 Verified by by
GNIT/CSE/LAB
MANUAL/ Date of Mrs. Deepika
OS/CN/VERSION 1.1 Revision Asst.Professor HOD(CSE)

21-Nov-2018

COMPUTER NETWORKS LAB SYLLABUS

III Year B.Tech. CSE - I Sem

Objective:
To understand the functionalities of various layers of OSI model
To understand the operating System functionalities

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 2

System/ Software Requirement:

 Intel based desktop PCs LAN CONNECTED with minimum of 166 MHZ or
faster processor with atleast 64 MB RAM and 100 MB free disk space

1. Implement the data link layer framing methods such as character, character
stuffing and bit stuffing.

2. Implement on a data set of characters the three CRC polynomials – CRC 12,
CRC 16 and CRC CCIP.

3. Implement Dijkstra‘s algorithm to compute the Shortest path thru a graph.

4. Take an example subnet graph with weights indicating delay between nodes.
Now obtain Routing table art each node using distance vector routing
algorithm

5. Take an example subnet of hosts. Obtain broadcast tree for it.

6. Take a 64 bit playing text and encrypt the same using DES algorithm.

7. Write a program to break the above DES coding

8. Using RSA algorithm encrypt a text data and Decrypt the same.

COMPUTER NETWORKS LAB

OBJECTIVES

 Analyze the different layers in networks.

 Define, use, and differentiate such concepts as OSI-ISO,TCP/IP.
 How to send bits from physical layer to data link layer
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 3

 Sending frames from data link layer to Network layer

 Different algorithms in Network layer
 Analyze the presentation layer, application layer
 They can understand how the data transferred from source to destination
 They can come to know that how the routing algorithms worked out in
network layer

Recommended System/Software Requirements

 Intel based desktop PC with minimum of 2.6GHZ or faster processor with at least
1 GB RAM and 40 GB free disk space and LAN connected.
 Operating system : Flavor of any WINDOWS or UNIX.
 Software : Turbo C, C++.

INTRODUCTION TO CN

The purpose of this is to acquaint the students with an overview of the Computer
Networks from the perspective how the information is transferred from source to
destination and different layers in networks. This course provides a basis for u. They
can understand how the data transferred from source to destination. They can come
to know that how the routing algorithms worked out in network layer understanding
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 4

the networking techniques that can take place in computer. A computer network is
made of two distinct subsets of components

Distributed applications are programs running on interconnected computers; a web

server, a remote login server, an e-mail exchanger are examples. This is the visible
part of what people call “the Internet”. In this lecture we will study the simplest
aspects of distributed applications. More sophisticated aspects are the object of
lectures called “Distributed Systems” and “Information Systems”. The network
infrastructure is the collection of systems which are required for the interconnection
of computers running the distributed applications. It is the main focus of this lecture.
The network infrastructure problem has itself two aspects: Distance: interconnect
remote systems that are too far apart for a direct cable connection Meshing:
interconnect systems together; even in the case of systems close to each other, it is
not possible in non-trivial cases to put cables from all systems to all systems
(combinatorial explosion, cable salad management problems etc.).

LAB CODE
 Students should report to the concerned lab as per the time table.

 Students who turn up late to the labs will in no case be permitted to do the
program schedule for the day.

 After completion of the program, certification of the concerned staff in-charge

in the observation book is necessary.

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 5

 Student should bring a notebook of 100 pages and should enter the
readings /observations into the notebook while performing the experiment.

 The record of observations along with the detailed experimental procedure of

the experiment in the immediate last session should be submitted and
certified staff member in-charge.
 Not more than 3-students in a group are permitted to perform the experiment
on the set.
 The group-wise division made in the beginning should be adhered to and no
mix up of students among different groups will be permitted.

 The components required pertaining to the experiment should be collected

from stores in-charge after duly filling in the requisition form.

 When the experiment is completed, should disconnect the setup made by

them, and should return all the components/instruments taken for the
purpose.

 Any damage of the equipment or burn-out components will be viewed seriously

either by putting penalty or by dismissing the total group of students from the
lab for the semester/year.

 Students should be present in the labs for total scheduled duration.

 Students are required to prepare thoroughly to perform the experiment before

coming to laboratory.

INDEX

Sno Experiment NAME OF THE EXPERIMENT PAGE

No. NO.

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 6

1 1 Implement the data link layer framing methods such 7 &11

as character, character stuffing and bit stuffing.

2 2 Implement on a data set of characters the three CRC

polynomials – CRC 12, CRC 16 and CRC CCIP 15

3 3 Implement Dijkstra‘s algorithm to compute the

20
Shortest path thru a graph.
4 4 Take an example subnet graph with weights indicating
delay between nodes. Now obtain Routing table art 24
each node using distance vector routing algorithm
5 5 Take an example subnet of hosts. Obtain broadcast 29
tree for it.

6 6 Take a 64 bit playing text and encrypt the same using

32
DES algorithm.
7 7 Write a program to break the above DES coding
38
8 8 Using RSA algorithm Encrypt a text data and Decrypt
43
the same

EXPERIMENT NO: 1. (a)

NAME OF THE EXPERIMENT: Bit Stuffing.

AIM: Implement the data link layer framing methods such as and bit stuffing.

HARDWARE REQUIREMENTS: Intel based Desktop PC:- RAM of 512 MB

SOFTWARE REQUIREMENTS: Turbo C / Borland C.

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 7

THEORY:
The new technique allows data frames to contain an arbitrary number if bits and
allows character codes with an arbitrary no of bits per character. Each frame begins
and ends with special bit pattern, 01111110, called a flag byte. When ever the
senders data link layer encounters five consecutive one’s in the data, it automatically
stuffs a 0 bit into the out going bit stream. This bit stuffing is analogous to character
stuffing, in which a DLE is stuffed into the out going character stream before DLE in
the data

ALGORITHM:

Begin
Step 1: Read frame length n
Step 2: Repeat step (3 to 4) until i<n(: Read values in to the input frame (0’s and 1’s)
i.e.
Step 3: initialize I i=0;
Step 4: read a[i] and increment i
Step 5: Initialize i=0, j=0, count =0
Step 6: repeat step (7 to 22) until i<n
Step 7: If a[i] == 1 then
Step 8: b[j] = a[i]
Step 9: Repeat step (10 to 18) until (a[k] =1 and k<n and count <5)
Step 10: Initialize k=i+1;
Step 11: Increment j and b[j]= a[k];
Step 12: Increment count ;
Step 13: if count =5 then
Step 14: increment j,
Step 15: b[j] =0
Step 16: end if
Step 17: i=k;
Step 18: increment k
Step 19: else
Step 20: b[j] = a[i]
Step 21: end if
Step 22: increment I and j
Step 23: print the frame after bit stuffing
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 8

Step 24: repeat step (25 to 26) until i< j

Step 25: print b[i]
Step 26: increment i
End

SOURCE CODE:
// BIT Stuffing program

#include<stdio.h>
#include<conio.h>
#include<string.h>
void main()
{
int a[20],b[30],i,j,k,count,n;
clrscr();
printf("Enter frame length:");
scanf("%d",&n);
printf("Enter input frame (0's & 1's only):");
for(i=0;i<n;i++)
scanf("%d",&a[i]);
i=0; count=1; j=0;
while(i<n)
{
if(a[i]==1)
{
b[j]=a[i];
for(k=i+1;a[k]==1 && k<n && count<5;k++)
{
j++;
b[j]=a[k];
count++;
if(count==5)
{
j++;
b[j]=0;
}
i=k;
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 9

}}
else
{
b[j]=a[i];
}
i++;
j++;
}
printf("After stuffing the frame is:");
for(i=0;i<j;i++)
printf("%d",b[i]);
getch();
}
OUTPUT:

VIVA QUESTIONS:

1. What is bit stuffing?

2. What is the use of bit stuffing?
3. with bit stuffing the boundary b/w 2 frames can be unambiguously
recognized by ------------------------
4. -------------------- is analogous to character stuffing
5. Each frame begins and ends with a special bit pattern 01111110 called
---------
6. The senders data link layer encounters ----------------no of 1’s consecutively
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 10

EXPERIMENT NO: 1. (b)

NAME OF THE EXPERIMENT: Character Stuffing.

AIM: Implement the data link layer framing methods such as character, character
stuffing.

HARDWARE REQUIREMENTS: Intel based Desktop PC:- RAM of 512 MB

SOFTWARE REQUIREMENTS: Turbo C / Borland C.

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 11

THEORY:
The framing method gets around the problem of resynchronization after an error by
having each frame start with the ASCII character sequence DLE STX and the
sequence DLE ETX. If the destination ever losses the track of the frame boundaries all
it has to do is look for DLE STX or DLE ETX characters to figure out. The data link
layer on the receiving end removes the DLE before the data are given to the network
layer. This technique is called character stuffing

ALGORITHM:
Begin
Step 1: Initialize I and j as 0
Step 2: Declare n and pos as integer and a[20],b[50],ch as character
Step 3: read the string a
Step 4: find the length of the string n, i.e n-strlen(a)
Step 5: read the position, pos
Step 6: if pos > n then
Step 7: print invalid position and read again the position, pos
Step 8: end if
Step 9: read the character, ch
Step 10: Initialize the array b , b[0…5] as ’d’, ’l’, ’e’, ’s’ ,’t’ ,’x’ respectively
Step 11: j=6;
Step 12: Repeat step[(13to22) until i<n
Step 13: if i==pos-1 then
Step 14: initialize b array,b[j],b[j+1]…b[j+6] as‘d’, ‘l’, ‘e’ ,’ch, ’d’, ‘l’,‘e’ respectively
Step 15: increment j by 7, i.e j=j+7
Step 16: end if
Step 17: if a[i]==’d’ and a[i+1]==’l’ and a[i+2]==’e’ then
Step 18: initialize array b, b[13…15]=’d’, ‘l’, ‘e’ respectively
Step 19: increment j by 3, i.e j=j+3
Step 20: end if
Step 21: b[j]=a[i]
Step 22: increment I and j;
Step 23: initialize b array,b[j],b[j+1]…b[j+6] as‘d’, ‘l’,‘e’ ,’e’,‘t’, ‘x’,‘\0’ respectively
Step 24: print frame after stuffing
Step 25: print b
End

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 12

SOURCE CODE:
//PROGRAM FOR CHARACTER STUFFING
#include<stdio.h>
#include<conio.h>
#include<string.h>
#include<process.h>
void main()
{
int i=0,j=0,n,pos;
char a[20],b[50],ch;
clrscr();
printf("enter string\n");
scanf("%s",&a);
n=strlen(a);
printf("enter position\n");
scanf("%d",&pos);
if(pos>n)
{
printf("invalid position, Enter again :");
scanf("%d",&pos);
}
printf("enter the character\n");
ch=getche();
b[0]='d';
b[1]='l';
b[2]='e';
b[3]='s';
b[4]='t';
b[5]='x';
j=6;
while(i<n)
{
if(i==pos-1)
{

b[j]='d';
b[j+1]='l';
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 13

b[j+2]='e';
b[j+3]=ch;
b[j+4]='d';
b[j+5]='l';
b[j+6]='e';
j=j+7;
}
if(a[i]=='d' && a[i+1]=='l' && a[i+2]=='e')
{
b[j]='d';
b[j+1]='l';
b[j+2]='e';
j=j+3;
}

b[j]=a[i];
i++;
j++;
}
b[j]='d';
b[j+1]='l';
b[j+2]='e';
b[j+3]='e';
b[j+4]='t';
b[j+5]='x';
b[j+6]='\0';
printf("\nframe after stuffing:\n");
printf("%s",b);
getch();
}

OUTPUT:

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 14

VIVA QUESTIONS:
1. What is character stuffing?
2. What is the use of character stuffing?
3. __________ is analogous to bit stuffing.
4. ___________ are the delimiters for character stuffing
5. Expand DLE STX__________
6. Expand DLE ETX_________

EXPERIMENT NO: 2.

NAME OF THE EXPERIMENT: Cyclic Redundancy Check.

AIM: Implement on a data set of characters the three CRC polynomials – CRC 12,
CRC 16 and CRC CCIP.

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 15

HARDWARE REQUIREMENTS: Intel based Desktop PC:- RAM of 512 MB

SOFTWARE REQUIREMENTS: Turbo C / Borland C.

THEORY:
CRC method can detect a single burst of length n, since only one bit per column will
be changed, a burst of length n+1 will pass undetected, if the first bit is inverted, the
last bit is inverted and all other bits are correct. If the block is badly garbled by a long
burst or by multiple shorter burst, the probability that any of the n columns will have
the correct parity that is 0.5. so the probability of a bad block being expected when it
should not be 2 power(-n). This scheme some times known as Cyclic Redundancy
Code

ALGORITHM/FLOWCHART:
Begin
Step 1: Declare I,j,fr[8],dupfr[11],recfr[11],tlen,flag,gen[4],genl,frl,
rem[4] as integer
Step 2: initialize frl=8 and genl=4
Step 3: initialize i=0
Step 4: Repeat step(5to7) until i<frl
Step 5: read fr[i]
Step 6: dupfr[i]=fr[i]
Step 7: increment i
Step 8: initialize i=0
Step 9: repeat step(10to11) until i<genl
Step 10: read gen[i]
Step 11: increment i
Step 12: tlen=frl+genl-1
Step 13: initialize i=frl
Step 14: Repeat step(15to16) until i<tlen
Step 15: dupfr[i]=0
Step 16: increment i
Step 17: call the function remainder(dupfr)
Step 18: initialize i=0
Step 19: repeat step(20 to 21) until j<genl
Step 20: recfr[i]=rem[j]
Step 21: increment I and j
Step 22: call the function remainder(dupfr)
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 16

Step 23: initialize flag=0 and i=0

Step 24: Repeat step(25to28) until i<4
Step 25: if rem[i]!=0 then
Step 26: increment flag
Step 27: end if
Step 28: increment i
Step 29: if flag=0 then
Step 25: print frame received correctly
Step 25: else
Step 25: print the received frame is wrong
End
Function: Remainder(int fr[])
Begin
Step 1: Declare k, k1,I,j as integer
Step 2: initialize k=0;
Step 3: repeat step(4 to 14) until k< frl
Step 4: if ((fr[k] == 1) then
Step 5: k1=k
Step 6: initialize i=0, j=k
Step 7: repeat step(8 to 9) until i< genl
Step 8: rem[i] =fr[j] exponential gen[i]
Step 9: increment I and j
Step 10: initialize I = 0
Step 11: repeat step(12to13) until I <genl
Step 12: fr[k1] = rem[i]
Step 13: increment k1 and i
Step 14: end if
End

SOURCE CODE:
//PROGRAM FOR CYCLIC REDUNDENCY CHECK
#include<stdio.h>
#include<conio.h>
int gen[4],genl,frl,rem[4];
void main()
{
int i,j,fr[8],dupfr[11],recfr[11],tlen,flag;
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 17

clrscr();
frl=8; genl=4;
printf("enter frame:");
for(i=0;i<frl;i++)
{
scanf("%d",&fr[i]);
dupfr[i]=fr[i];
}
printf("enter generator:");
for(i=0;i<genl;i++)
scanf("%d",&gen[i]);

tlen=frl+genl-1;
for(i=frl;i<tlen;i++)
{
dupfr[i]=0;
}
remainder(dupfr);

for(i=0;i<frl;i++)
{
recfr[i]=fr[i];
}
for(i=frl,j=1;j<genl;i++,j++)
{
recfr[i]=rem[j];
}
remainder(recfr);
flag=0;
for(i=0;i<4;i++)
{
if(rem[i]!=0)
flag++;
}
if(flag==0)
{
printf("frame received correctly");
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 18

}
else
{
printf("the received frame is wrong");
}

getch();
}

remainder(int fr[])
{
int k,k1,i,j;
for(k=0;k<frl;k++)
{
if(fr[k]==1)
{
k1=k;
for(i=0,j=k;i<genl;i++,j++)
{
rem[i]=fr[j]^gen[i];
}

for(i=0;i<genl;i++)
{
fr[k1]=rem[i];
k1++;
}
}
}
}
OUTPUT:

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 19

VIVA QUESTIONS:
1. What is CRC?
2. What is the use of CRC?
3. Name the CRC standards
4. Define checksum?
5. Define generator polynomial?
6. Polynomial arithmetic is done by_______

EXPERIMENT NO: 3

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 20

NAME OF THE EXPERIMENT: Shortest Path.

AIM: Implement Dijkstra‘s algorithm to compute the Shortest path thru a given
graph.

HARDWARE REQUIREMENTS: Intel based Desktop PC:- RAM of 512 MB

SOFTWARE REQUIREMENTS: Turbo C / Borland C.

THEORY:

ALGORITHM/FLOWCHART:

Begin
Step1: Declare array path [5] [5], min, a [5][5], index, t[5];
Step2: Declare and initialize st=1,ed=5
Step 3: Declare variables i, j, stp, p, edp
Step 4: print “enter the cost “
Step 5: i=1
Step 6: Repeat step (7 to 11) until (i<=5)
Step 7: j=1
Step 8: repeat step (9 to 10) until (j<=5)
Step 9: Read a[i] [j]
Step 10: increment j
Step 11: increment i
Step 12: print “Enter the path”
Step 13: read p
Step 14: print “Enter possible paths”
Step 15: i=1
Step 16: repeat step(17 to 21) until (i<=p)
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 21

Step 17: j=1

Step 18: repeat step(19 to 20) until (i<=5)
Step 19: read path[i][j]
Step 20: increment j
Step 21: increment i
Step 22: j=1
Step 23: repeat step(24 to 34) until(i<=p)
Step 24: t[i]=0
Step 25: stp=st
Step 26: j=1
Step 27: repeat step(26 to 34) until(j<=5)
Step 28: edp=path[i][j+1]
Step 29: t[i]= [ti]+a[stp][edp]
Step 30: if (edp==ed) then
Step 31: break;
Step 32: else
Step 33: stp=edp
Step 34: end if
Step 35: min=t[st]
Step 36: index=st
Step 37: repeat step( 38 to 41) until (i<=p)
Step 38: min>t[i]
Step 39: min=t[i]
Step 40: index=i
Step 41: end if
Step 42: print” minimum cost” min
Step 43: print” minimum cost pth”
Step 44: repeat step(45 to 48) until (i<=5)
Step 45: print path[index][i]
Step 46: if(path[idex][i]==ed) then
Step 47: break
Step 48: end if
End

SOURCE CODE:
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 22

//*********************************
//5 .PROGRAM FOR FINDING SHORTEST //PATH FOR A GIVEN GRAPH
//*********************************

#include<stdio.h>
#include<conio.h>
void main()
{
int path[5][5],i,j,min,a[5][5],p,st=1,ed=5,stp,edp,t[5],index;
clrscr();
printf("enter the cost matrix\n");
for(i=1;i<=5;i++)
for(j=1;j<=5;j++)
scanf("%d",&a[i][j]);
printf("enter the paths\n");
scanf("%d",&p);
printf("enter possible paths\n");
for(i=1;i<=p;i++)
for(j=1;j<=5;j++)
scanf("%d",&path[i][j]);
for(i=1;i<=p;i++)
{
t[i]=0;
stp=st;
for(j=1;j<=5;j++)
{
edp=path[i][j+1];
t[i]=t[i]+a[stp][edp];
if(edp==ed)
break;
else
stp=edp;
}
}
min=t[st];index=st;
for(i=1;i<=p;i++)
{
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 23

if(min>t[i])
{
min=t[i];
index=i;
}
}
printf("minimum cost %d",min);
printf("\n minimum cost path ");
for(i=1;i<=5;i++)
{
printf("--> %d",path[index][i]);
if(path[index][i]==ed)
break;
}
getch();
}
9. OUTPUT:

10 VIVA QUESTIONS:

EXPERIMENT NO: 4

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 24

NAME OF THE EXPERIMENT: Distance Vector routing.

AIM: Obtain Routing table at each node using distance vector routing algorithm for a
given subnet.

HARDWARE REQUIREMENTS: Intel based Desktop PC:- RAM of 512 MB

SOFTWARE REQUIREMENTS: Turbo C / Borland C.

THEORY:
Distance Vector Routing Algorithms calculate a best route to reach a destination
based solely on distance. E.g. RIP. RIP calculates the reach ability based on hop
count. It’s different from link state algorithms which consider some other factors like
bandwidth and other metrics to reach a destination. Distance vector routing
algorithms are not preferable for complex networks and take longer to converge.

ALGORITHM/FLOWCHART:

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 25

Begin
Step1: Create struct node unsigned dist[20],unsigned from[20],rt[10]
Step2: initialize int dmat[20][20], n,i,j,k,count=0,
Step3: write "the number of nodes "
Step4: read the number of nodes "n"
Step5: write" the cost matrix :"
Step6: intialize i=0
Step7: repeat until i<n
Step8: increment i
Step9: initialize j=0
Step10: repeat Step(10-16)until j<n
Step11: increment j
Step12:read dmat[i][j]
Step13:intialize dmat[i][j]=0
Step14:intialize rt[i].dist[j]=dmat[i][j]
Step15:intialize rt[i].from[j]=j
Step16:end
Step17:start do loop Step (17-33)until
Step18:intilialize count =0
Step19:initialize i=0
Step20:repeat until i<n
Step21:increment i
Step22:initialize j=0
Step23:repeat until j<n
Step24:increment j
Step25:initialize k=0
Step26:repeat until k<n
Step27:increment k
Step28:if repeat Step(28-32) until rt[i].dist[j]>dmat[i][k]+rt[k].dist[j]
Step29:intialize rt[i].dist[j]=rt[i].dist[k]+rt[k].dist[j]
Step30:intialize rt[i].from[j]=k;
Step31:increment count
Step32:end if
Step33:end do stmt
Step34:while (count!=0)
Step35:initialize i=0
Step36:repeat Steps(36-44)until i<n
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 26

Step37:increment i
Step38:write ' state values for router',i+1
Step39:initialize j=0
Step40:repeat Steps ( 40-43)until j<n
Step41:increment j
Step42:write 'node %d via %d distance % ',j+1,rt[i].from[j]+1,rt[i].dist[j]
Step43:end
Step44:end
end

SOURCE CODE:
#include<stdio.h>
#include<conio.h>

struct node
{
unsigned dist[20];
unsigned from[20];
}rt[10];

int main()
{
int dmat[20][20];
int n,i,j,k,count=0;
clrscr();
printf("\nEnter the number of nodes : ");
scanf("%d",&n);
printf("Enter the cost matrix :\n");
for(i=0;i<n;i++)
for(j=0;j<n;j++)
{
scanf("%d",&dmat[i][j]);
dmat[i][i]=0;
rt[i].dist[j]=dmat[i][j];
rt[i].from[j]=j;
}
do
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 27

{
count=0;
for(i=0;i<n;i++)
for(j=0;j<n;j++)
for(k=0;k<n;k++)
if(rt[i].dist[j]>dmat[i][k]+rt[k].dist[j])
{
rt[i].dist[j]=rt[i].dist[k]+rt[k].dist[j];
rt[i].from[j]=k;
count++;
}
}while(count!=0);
for(i=0;i<n;i++)
{
printf("\nState value for router %d is \n",i+1);
for(j=0;j<n;j++)
{
printf("\nnode %d via %d Distance%d",j+1,rt[i].from[j]+1,rt[i].dist[j]);
}
}
printf("\n");
}

OUTPUT:
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 28

VIVA QUESTIONS:
1. What is routing
2. What is best algorithm among all routing algorithms?
3. What is static routing?
4. Difference between static and dynamic
5. How distance vector routing works
6. What is optimality principle?

EXPERIMENT NO: 5

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 29

NAME OF THE EXPERIMENT: Broadcast Tree.

AIM: Implement broadcast tree for a given subnet of hosts

HARDWARE REQUIREMENTS: Intel based Desktop PC:- RAM of 512 MB

SOFTWARE REQUIREMENTS: Turbo C / Borland C.

THEORY:
This technique is widely used because it is simple and easy to understand. The idea of
this algorithm is to build a graph of the subnet with each node of the graph
representing a router and each arc of the graph representing a communication line.
To choose a route between a given pair of routers the algorithm just finds the
broadcast between them on the graph.

ALGORITHM/FLOWCHART:

step 1: declare variable as int p,q,u,v,n;

step 2: Initialize min=99,mincost=0;
step 3: declare variable as int t[50][2],i,j;
step 4: declare variable as int parent[50],edge[50][50];
step 5: Begin
step 6: write "Enter the number of nodes"
step 7: read "n"
step 8: Initialize i=0
step 9: repeat step(10-12) until i<n
step10: increment i
step11: write"65+i"
step12: Initialize parent[i]=-1
step13:wite "\n"
step14: Initialize i=0
step15: repeat step(15-21) until i<n
step16: increment i
step17: write"65+i"
step18: Initialize j=0
step19: repeat until j<n
step20: increment j
step21: read edge[i][j]
step22: Initialize i=0
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 30

step23: repeat step(23-43) until i<n

step24: increment i
step25: Initialize j=0
step26: repeat until j<n
step27: increment j
step28: if'edge[i]j]!=99
step29: if'min>edge[i][j] repeat step (29-32)
step30: intialize min=edge[i][j]
step31: intialize u=i
step32: intialize v=j
step33: calling function p=find(u);
step34: calling function q=find(v);
step35: if'P!=q repeat steps(35-39)
step36: intialize t[i][0]=u
step37: intialize t[i][1]=v
step38: initialize mincost=mincost+edge[u][v]
step39: call function sunion(p,q)
step40: else repeat steps(40-42)
step41: Intialize t[i][0]=-1;
step42: Intialize t[i][1]=-1;
step43: intialize min=99;
step44; write"Minimum cost is %d\n Minimum spanning tree is",mincost
step45: Initialize i=0
step46: repeat until i<n
step47: increment i
step48: if't[i][0]!=-1 && t[i][1]!=-1'repeat step(48-50)
step49: write "%c %c %d", 65+t[i][0], 65+t[i][1], edge[t[i][0]][t[i][1]]
step50: write"\n"
step51: end
step52: called function sunion(int l,int m) repeat step(51-52)
step53: intialize parent[l]=m
step54: called function find(int l) repeat step(53-56)
step55: if parent([l]>0)
step56: initialize l=parent
step57: return l
SOURCE CODE:

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 31

// Write a ‘c’ program for Broadcast tree from subnet of host

#include<stdio.h>
int p,q,u,v,n;
int min=99,mincost=0;
int t[50][2],i,j;
int parent[50],edge[50][50];
main()
{
clrscr();
printf("\n Enter the number of nodes");
scanf("%d",&n);
for(i=0;i<n;i++)
{
printf("%c\t",65+i);
parent[i]=-1;
}
printf("\n");
for(i=0;i<n;i++)
{
printf("%c",65+i);
for(j=0;j<n;j++)
scanf("%d",&edge[i][j]);
}
for(i=0;i<n;i++)
{
for(j=0;j<n;j++)
if(edge[i][j]!=99)
if(min>edge[i][j])
{
min=edge[i][j];
u=i;
v=j;
}
p=find(u);
q=find(v);
if(p!=q)
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 32

{
t[i][0]=u;
t[i][1]=v;
mincost=mincost+edge[u][v];
sunion(p,q);
}
else
{
t[i][0]=-1;
t[i][1]=-1;
}
min=99;
}
printf("Minimum cost is %d\n Minimum spanning tree is\n" ,mincost);
for(i=0;i<n;i++)
if(t[i][0]!=-1 && t[i][1]!=-1)
{
printf("%c %c %d", 65+t[i][0], 65+t[i][1],
edge[t[i][0]][t[i][1]]);
printf("\n");
}
getch();
}
sunion(int l,int m)
{
parent[l]=m;
}
find(int l)
{
if(parent[l]>0)
l=parent[l];
return l;
}

OUTPUT:

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 33

VIVA QUESTIONS:
1. what is spanning tree
2. what is broad cast tree
3. what are the advantages of broad cast tree
4. where we should use the broad cast tree
5. what is flooding
6. what is the subnet

EXPERIMENT NO: 6

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 34

NAME OF THE EXPERIMENT: encrypting DES.

AIM: Take a 64 bit playing text and encrypt the same using DES algorithm.

HARDWARE REQUIREMENTS: Intel based Desktop PC:- RAM of 512 MB

SOFTWARE REQUIREMENTS: Turbo C / Borland C.

THEORY:
Data encryption standard was widely adopted by the industry in security products.
Plain text is encrypted in blocks of 64 bits yielding 64 bits of cipher text. The
algorithm which is parameterized by a 56 bit key has 19 distinct stages. The first
stage is a key independent transposition and the last stage is exactly inverse of the
transposition. The remaining stages are functionally identical but are parameterized
by different functions of the key. The algorithm has been designed to allow decryption
to be done with the same key as encryption

ALGORITHM/FLOWCHART:

Begin
Step1: Initialize as int i,ch,lp;
Step2: Initialize as char cipher[50],plain[50];
Step3: Initialize as char key[50];
Step4: while(1) repeat steps(4-36)
Step5: write "\n-----MENU-----\n"
Step6: write "\n1:Data Encryption\t\n\n2:Data Decryption\t\n\n3:Exit"
Step7: write ("\n\nEnter your choice:"
Step8: read"%d",&ch
Step9: stament switch(ch) repeat steps(9-35)
case 1:
step10: read "\nData Encryption"
step11:read ("\nEnter the plain text:"
step12: fflush(stdin)
step 13 : gets(plain)
step14: write "\nEnter the encryption key:"
step15: gets(key)
step16: lp=strlen(key)
step17: Initialize i=0
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 35

step18: repeat until plain[i]!='\0'

step19: increment i
step20: initialize cipher[i]=plain[i]^lp
step21: initialize cipher[i]='\0';
step22: write "\nThe encrypted text is:"
step23: puts(cipher)
step24: break
case 2:
step25: write"\nData decryption"
step26: Initialize i=0
step27: repeat until plain[i]!='\0'
step28: increment i
step29: initialize plain[i]=cipher[i]^lp
step30:write"\nDecrypted text is:"
step32: puts(plain)
step33:break
case 3:
step34:exit(0);
step35: end switch stmt
step36: end while(1)stmt
End

SOURCE CODE:

/*Take a 64 bit playing text and encrypt the same using DES algorithm */
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 36

#include<stdio.h>
#include<conio.h>
#include<stdlib.h>
#include<string.h>
void main()
{
int i,ch,lp;
char cipher[50],plain[50];
char key[50];
clrscr();
while(1)
{
printf("\n-----MENU-----\n");
printf("\n1:Data Encryption\t\n\n2:Data Decryption\t\n\n3:Exit");
printf("\n\nEnter your choice:");
scanf("%d",&ch);
switch(ch)
{
case 1: printf("\nData Encryption");
printf("\nEnter the plain text:");
fflush(stdin);
gets(plain);
printf("\nEnter the encryption key:");
gets(key);
lp=strlen(key);
for(i=0;plain[i]!='\0';i++)
cipher[i]=plain[i]^lp;
cipher[i]='\0';
printf("\nThe encrypted text is:");
puts(cipher);
break;
case 2: printf("\nData decryption");
for(i=0;cipher[i]!='\0';i++)
plain[i]=cipher[i]^lp;
printf("\nDecrypted text is:");
puts(plain);
break;
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 37

case 3:
exit(0);
}
}
getch();
}
OUTPUT:

VIVA QUESTIONS:
1. Expand DES_____________
2. What is cipher text?
3. What is plain text?
4. Define public key?
5. Define encryption?
6. Substitutions are performed by____________boxes

EXPERIMENT NO: 7.

NAME OF THE EXPERIMENT: Decrypting DES.

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 38

AIM: Write a program to break the above DES coding

HARDWARE REQUIREMENTS: Intel based Desktop PC:- RAM of 512 MB

SOFTWARE REQUIREMENTS: Turbo C / Borland C.

THEORY:
Data encryption standard was widely adopted by the industry in security products.
Plain text is encrypted in blocks of 64 bits yielding 64 bits of cipher text. The
algorithm which is parameterized by a 56 bit key has 19 distinct stages. The first
stage is a key independent transposition and the last stage is exactly inverse of the
transposition. The remaining stages are functionally identical but are parameterized
by different functions of the key. The algorithm has been designed to allow decryption
to be done with the same key as encryption

ALGORITHM/FLOWCHART:
Begin
Step1: Initialize char pwd[20];
Step2: Initialize char alpha[26]="abcdefghijklmnopqrstuvwxyz";
Step3: Initialize int num[20],i,n,key;
Step4: Write "Enter the password:"
Step5: Read pwd
Step6: Initialize n=strlen(pwd
Step7: Initialize i=0
Step8: Repeat until i<n
Step9: Increment i
Step10: Intialize num[i]=toascii(tolower(pwd[i]))-'a'
Step11: Write "Enter the key:"
Step12: Read key
Step13: Initialize i=0
Step14: Repeat until i<n
Step15: Increment i
Step16: Initialize num[i]=(num[i]+key)%26
Step17: Initialize i=0
Step18: Repeat until i<n
Step19: Increment i
Step20: Intialize pwd[i]=alpha[num[i]]
Step21: Write “The key is:%d",key
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 39

Step22: Write “Encrypted text is:%s",pwd

Step23: Initialize i=0
Step24: Repeat steps(24-29)until i<n
Step25: Increment i
Step26: Intialize num[i]=(num[i]-key)%26
Step27: if ‘ num[i]<0 ’
Step28: Initialize num[i]=26+num[i]
Step29: Intialize pwd[i]=alpha[num[i]]
Step30: Write “Decrypted text is:%s",pwd
End
SOURCE CODE:
/*Write a program to break the above DES coding*/
#include<stdio.h>
#include<conio.h>
#include<string.h>
#include<ctype.h>
void main()
{
char pwd[20];
char alpha[26]="abcdefghijklmnopqrstuvwxyz";
int num[20],i,n,key;
clrscr();
printf("\nEnter the password:");
scanf("%s",&pwd);
n=strlen(pwd);
for(i=0;i<n;i++)
num[i]=toascii(tolower(pwd[i]))-'a';
printf("\nEnter the key:");
scanf("%d",&key);
for(i=0;i<n;i++)
num[i]=(num[i]+key)%26;
for(i=0;i<n;i++)
pwd[i]=alpha[num[i]];
printf("\nThe key is:%d",key);
printf("\nEncrypted text is:%s",pwd);
for(i=0;i<n;i++)
{
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 40

num[i]=(num[i]-key)%26;
if(num[i]<0)
num[i]=26+num[i];
pwd[i]=alpha[num[i]];
}
printf("\nDecrypted text is:%s",pwd);
getch();
}
OUTPUT:

VIVA QUESTIONS:
1. Define decryption?
2. What is private key?
3. Transpositions are performed in _________box
4. What is cipher feedback mode?
5. Define product cipher?
6. What is DES chaining?

EXPERIMENT NO: 8

NAME OF THE EXPERIMENT: RSA.

AIM: Using RSA algorithm encrypt a text data and Decrypt the same.
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 41

HARDWARE REQUIREMENTS: Intel based Desktop PC:-RAM of 512 MB

SOFTWARE REQUIREMENTS: Turbo C / Borland C.

THEORY:
RSA method is based on some principles from number theory. In encryption process
divide the plain text into blocks, so that each plain text message p falls in the interval
0<p<n this can be done by grouping the plain text into blocks of k bits. Where k is the
largest integer for which 2 power k <n is true. The security of this method is based on
the difficulty of factoring large numbers. The encryption and decryption functions are
inverses

ALGORITHM/FLOWCHART:

Step1: Start
Step2: Initialize variables as int a,b,i,j,t,x,n,k=0,flag=0,prime[100]
Step3: Initialize variables as char m[20],pp[20]
Step4: Initialize variables as float p[20],c[20]
Step5: Initialize variables as double e,d;
Step6: Initialize i=0
Step7: Repeat step(7-16) until i<50
Step8: Increment i
Step9: Initialize flag=0
Step10: Initialize j=2
Step11: Repeat until j<i/2
Step12: if ‘ i%j == 0 ’ repeat until(12-14)
Step13: Initialize flag=1
Step14: break
Step15: if ’ (flag==0) ‘
Step16: Initialize prime[k++]=i
Step17: Initialize a=prime[k-1]
Step18: Initialize b=prime[k-2]
Step19: Initialize n=a*b
Step20: Initialize t=(a-1)*(b-1)
Step21: Initialize e=(double)prime[2]
Step22: Initialize d=1/(float)e
Step23: write "\nKey of encryption is:%lf\n",d
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 42

Step24: write"\nEnter plain the text:"

Step25: read m
Step26: Intialize x=strlen(m)
Step27: write"\nDecryption status From Source to Destination:\n"
Step28: write"\nSource\t->----------------------------------<-destination\n"
Step29: write"\nChar\tnumeric\tcipher\t\tnumeric\t\tchar \n"
Step30: write"\n***********************************************************\n"
Step31: write"\n"
Step32: Intialize i=0
Step33: repeat steps(33-46) until i<x
Step34: Increment i
Step35: write "%c",m[i]
Step36: write"\t%d",m[i]-97
Step37; Intialize c[i]=pow(m[i]-97,(float)e)
Step38: Initialize c[i]=fmod(c[i],(float)n)
Step39: write "\t%f",c[i]
Step40: Intialize p[i]=pow(c[i],(float)d);
Step41: Intialize p[i]=fmod(p[i],(float)n);
Step42: write "\t%f",p[i]
Step43: Intialize pp[i]=p[i]+97
Step44: write "\t%c\n",pp[i]
Step45: write "\n***********************************************************\n"
Step46: write "\n"
Step 47 end

SOURCE CODE:

/*Using RSA algorithm encrypt a text data and Decrypt the same*/
#include<stdio.h>
#include<conio.h>
#include<ctype.h>
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 43

#include<math.h>
#include<string.h>
void main()
{

int a,b,i,j,t,x,n,k=0,flag=0,prime[100];
char m[20],pp[20];
float p[20],c[20];
double e,d;
clrscr();

for(i=0;i<50;i++)
{
flag=0;
for(j=2;j<i/2;j++)

if(i%j==0)
{
flag=1;
break;
}
if(flag==0)
prime[k++]=i;
}
a=prime[k-1];
b=prime[k-2];
n=a*b;
t=(a-1)*(b-1);
e=(double)prime[2];
d=1/(float)e;

printf("\nKey of encryption is:%lf\n",d);

printf("\nEnter plain the text:");
scanf("%s",&m);
x=strlen(m);
printf("\nDecryption status From Source to Destination:\n");
printf("\nSource\t->----------------------------------<-destination\n");
IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 44

printf("\nChar\tnumeric\tcipher\t\tnumeric\t\tchar \n");
printf("\n***********************************************************\n");
printf("\n");

for(i=0;i<x;i++)
{
printf("%c",m[i]);
printf("\t%d",m[i]-97);

c[i]=pow(m[i]-97,(float)e);
c[i]=fmod(c[i],(float)n);

printf("\t%f",c[i]);

p[i]=pow(c[i],(float)d);
p[i]=fmod(p[i],(float)n);

printf("\t%f",p[i]);

pp[i]=p[i]+97;

printf("\t%c\n",pp[i]);
printf("\n***********************************************************\n");
printf("\n");

}
getch();
}

OUTPUT:

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19
CN LAB MANUAL CSE DEPARTMENT B.TECH III CSE 45

VIVA QUESTIONS:
1. Expand RSA_________
2. What is encryption & decryption in RSA
3. To encrypt a message P, Compute C=_______
4. To decrypt C, Compute P=_________
5. Define cryptography?
6. __________ systems use public key cryptography

IMRAN
ASST.PROFESSOR GURU NANAK INSTITUTE of TECHNOLOGY Hyd A.Y 2018-19