Prinect

Color and Quality

Standardization in Offset Printing

2 Prinect Color Solutions – User Guide Introduction

Prinect Color Solutions

Prinect Color Solutions – User Guide
In the publication series Prinect Color Solutions – User Guide we aim to take a closer
look at individual aspects of the color workflow. The focus here is on practical
applications.
The aim of Prinect Color Solutions is to optimize printing press preset-
tings and monitor the printing process before, during and after print. This is
achieved essentially by improved integration of the printing press into prepress
workflows. The following data is exchanged between prepress and press to
this end:
• Printing material parameters,
• Parameters of printing inks and consumables,
• Target values of the printing process for making presettings
on the Prinect CP2000 Center,
• Zonal dot area values on the printing plate.
This allows printing presses to be set up fast following a job change. For print
control using Prinect Image Control and Prinect Axis Control, information
about the printing process and the contents of the print sheet is made avail-
able via the Prinect Prepress Interface.
Prepress supplies the parameters for presetting and monitoring the print.
The parameters are generated by the Prinect Signa Station, Prinect Printready
System and Prinect MetaDimension applications. The Calibration Manager is
responsible for creating the correct calibrations of the plate setter and the
printing process, PrintOpen for profiling printing and proofing processes and
Quality Monitor for monitoring all the components involved.
There is a complex interaction between the individual components. Prinect
Color Solutions – User Guide is designed to make this interaction more transpar-
ent for the user.

Standardization in Offset Printing

The aim of this Standardization in Offset Printing document is to describe
the opportunities of a standardized working method with the components
of the Prinect Color Solutions for prepress and printing.
Standards are publicly accessible documents for the manufacture of pro-
ducts and systems that are made binding through national or international
agreements. Standards create a common language between those involved,
between manufacturers and users, between customers and suppliers. Yet
standards also create production stability within a company due to clearly
structured workflows. Successful standardization brings cost reductions in
daily production and improves quality with fewer customer complaints.
 Standardization in Offset Printing Prinect Color Solutions – User Guide 3

In future the demand for standardization in offset printing will increase –

with corresponding effects on how modern print shops work. The reasons for
this are clear. Binding standards offer predictable results and consistent, com-
parable quality regardless of location and output device. Yet there is also a de-
sire on the part of print buyers to remain independent in their selection of
print shops. This will make standardized interfaces a decisive factor in winning
orders in future.
There are many factors involved in the path from digital drafts to printed
sheets which influence the inking result. Dot gain is one important example
of this, as it can change with new paper or different ink sets. Printing plates
can also have different ink trapping characteristics, and printers are often
faced with color specifications and proofs from customers that are almost im-
possible to reproduce on their presses. In this respect, standardization helps
all parties detect potential problems early on.
Advantages of standardization from the print shop’s perspective include
• Improved productivity throughout the entire added value chain
• Detailed coordination throughout the entire process – from prepress to
printing
• Increased process reliability and repeatability due to systematic quality
control.

This publication shows at which workplaces and in what form standardization

is supported in terms of color. This knowledge then also allows further reach-
ing functions to be exploited more easily.

Software Versions
The present publication refers to the following software versions of Prinect
products:

Software Versions
Prinect CP2000 Center Version 39
Option ColorAssistant Version 43
Prinect Image Control Version 4.0
Calibration Manager Version 2.3
Quality Monitor Version 1.1
PrintOpen Version 5.1

More recent versions of the software generally also support the functions
described, although the look of the actual user interface may vary slightly.
Information about this is given in the respective product and user documenta-
tion. The products and options described here are not always supplied as stand-
ard, so some of them may have to be purchased separately.
Table of Contents

2 Prinect Color Solutions

2 Prinect Color Solutions – User Guide
2 Standardization in Offset Printing
3 Software Versions

5 Table of Contents

6 Standardization – An Overview
6 From International Standard to Accepted Practice
8 From Accepted Practice to International Standard
8 Measuring and Monitoring – Basis of Standardization
9 Reference Values and Tolerances
10 Printing and Print Monitoring
12 Exposure and Tonal Value Monitoring
13 Standardization and Prinect CP2000 Center
13 Creating a new Standard (Characteristic Curves)
14 Working with Standards (Characteristic Curves)
16 Standardization and Prinect Image Control
16 Creating a new Standard
19 Working with Standards
20 Standardization and Quality Monitor
20 Creating a new Standard
22 Comparison of Measured Values and Standards
23 Using Measured Values as Standards
24 Standardization and Calibration Manager
24 Creating a new Standard
26 Creating a new Process Calibration
28 Standardization and PrintOpen
28 Creating a New Standard
30 Comparison of Measured Values and Standards
31 Adjusting Measured Values to Standards
32 Appendix: Overview of Important Standards
6 Prinect Color Solutions – User Guide Standardization – An Overview

Standardization – An Overview
Standardization first of all requires defined standards. Standards are guide-
lines, processes and procedural instructions for production of multi-color
printed products with repeatable quality that are recognized in the graphic
arts industry and particularly in printing.
Yet standards are not all created equal. They can vary greatly.
For example, there are international standards, which are drawn up by
the ISO (International Organization for Standardization with HQ in Geneva).
These include standards for process colors which ensure comparable printing
ink quality across manufacturers or different ink batches. They are also stand-
ards for process monitoring in printing and proof printing, including film
and plate exposure, as well as standards for measurement technology and data
communication.
Alongside international standards there are also so-called industry stand-
ards, which are developed by individual manufacturers or joint ventures and
assume the status of a standard through mutual agreement. An example of a
manufacturer agreement is the International Color Consortium (ICC), which
drew up the profile format specifications. Adobe’s PDF (Portable Document
Format) is an example of a manufacturer standard that has achieved the status
of a generally accepted standard through market forces.
Alongside this, there are also national standards, such as DIN standards
(Deutsches Institut für Normung with HQ in Berlin). However, these have lost
some ground in the last few years. National standards tend to be adopted as
international standards very quickly, as international standards automatically
apply in national legislation.

From International Standard to Accepted Practice

Standards are not always easy for companies to apply in practical operations.
There is a great number of interdependencies between the standards. It is easy
to lose track of what applies where. And even the interpretation of what is
written in a standard is not always easy. This is why in Germany the “German
Printing and Media Industries Federation” (bvdm) issues a national guideline.
The Offset Printing Process Standard is a detailed description of the individ-
ual steps involved in print production. The Process Standard describes resour-
ces, some of which are free of charge (such as ICC profiles) and some of which
must be purchased (such as the Altona Test Suite).
Manuals and resources are also created and published by motivated users
that get together to from groups, such as the ECI (European Color Initiative).
Examples of work include the White Papers on color management and digital
photography, monitoring tools such as the ECI 2002 test chart or the recent
Gray Control Strip development for various printing conditions.
 Standardization – An Overview Prinect Color Solutions – User Guide 7

Individual agencies have published specific directives for production of

catalogs. One example of this is the production guidelines for BMW catalogs
that lay down in detail the interface between the agency and print shop.
And some enterprises even produce their own internal manuals, particu-
larly when they work in conditions that differ from the official standard. This
can make sense when working with highly pigmented inks and/or printing
with frequency modulated screening.
This all ultimately means that in real life situations international standards
are less important than the concrete directives specified by national associa-
tions, user groups and companies. The most important factors are whether
the guidelines are binding and whether they can be tested by both partners –
i. e. agreement between customer and supplier.
So what are the relationships between the various standards, guidelines
and resources for print production? The chart below illustrates this.
The standards for process colors (ISO 2846-1) and for color measurement
(ISO 13655) are a prerequisite for the application of the standards in print pro-
cess monitoring (ISO 12647-2). These three standards are the most important
prerequisites for the national guidelines, in Germany for the Offset Printing
Process Standard. The Print Media Standard also describes how to handle data
formats and apply color management.
To ensure that color management works as it should, international stand-
ards for characterization data have been developed to describe concrete print-
ing processes and for ICC profiles (ISO 12642 and ISO 15076).

ISO 2846-1:2000 ISO 13655:2000

ISO 12647-2:2004

Offset Printing Process Standard 2003

2003

Print Media Standard 2004

ISO 15930-X:2003

ISO/DIS 12642-2

Altona Test Suite 2004

Characterization data 2004

Ugra/Fogra Media Wedge

Standard profiles 2004

ISO 15076:2005
8 Prinect Color Solutions – User Guide Standardization – An Overview

The Altona Test Suite has been developed from the specifications of the
Offset Printing Process Standard. The data format and the color description of
the objects in these documents are based on the PDF/X standard ISO 15930-3.
The documents in this suite are used to check proof printing systems, although
they can also be applied to printing. They are based on the standard charac-
terization data and ICC profiles of FOGRA and ECI. The characterization data,
on the other hand, is the basis for the “Ugra/FOGRA Media Wedge” control
element. These control elements are then in turn evaluated according to the
ISO 13655 standard.
International standards, national guidelines and national resources form
a consistent system that works well in practice, at least in Germany. However,
there is still room for improvement.

From Accepted Practice to International Standard

Standards, guidelines and resources describe the current state-of-the-art. They
are not a minimum consensus, but describe the results that can be achieved
under standard conditions. Standards are fluid and are subject to continuous
further development. They are checked and adapted to current practices in a
4 to 5 year cycle, sometimes even sooner. At the moment, the inking values of
the secondary colors in the process standard ISO 12647-2 are being revised and
adjusted to real print results.

Measuring and Monitoring – Basis of Standardization

Objective measurement of the properties that have an influence on quality is
absolutely vital. The most important properties include the inking values of
solids in printing and the tone values of continuous tones. The Process Stand-
ard specifies the reference values. They are measured using suitable control
elements, such as quality control strips, or special elements, such as a media
wedges. The measured values are then compared with the reference values
and evaluated.
Alongside the measurements, a visual check is also necessary. If the custo-
mer supplies a proof, the production run must be compared to this and any
necessary corrections made. In terms of gray reproduction, the human eye is
far more sensitive than a measuring device. And in certain circumstances in-
dividual corrections are also necessary here. The measuring devices and the
visual proofing conditions need to be standardized. There are applicable
standards and resources for this.
The measurement backing (material underneath the product) plays an
important role in color measurement and visual color matching, and is often
a cause of irritation. While spectral color measurement itself is predominant-
ly standardized and works well, there is still a long way to go before the stand-
ards concerning the measurement backing are in line with modern practice.
First and foremost, the guidelines need to offer better descriptions of how to
handle this.
During color measurement, white and black backings give different nume-
rical values depending on the transparency of the paper. And if both sides of a
sheet are printed, the reverse side can also influence the measured values of
the front. Not only the measured values, but also the visual perception of the
sheet is then altered.
 Standardization – An Overview Prinect Color Solutions – User Guide 9

Laboratory tests on color samples are performed against a white backing.

For process monitoring in printing a black backing is stipulated, to minimize
the influence of the printed reverse side. Yet for process monitoring in proof
printing, a white backing is generally used today, in contradiction to the stand-
ard. When performing visual checks there is no real standard. Common prac-
tice and standards have each gone their own way here, and standardization is
required to once again establish consistent conditions.

Reference Values and Tolerances

Inking values and dot gain are the central elements in process standardization
according to ISO Standard 12647-2. Alongside the approximate definition of
paper types for offset printing, it is the color coordinates of paper and process
colors as well as the combined printing of the process colors that are of parti-
cular interest for process monitoring. As you can see in the following graph,
there are significant differences between the “coated” (PT1) and “uncoated”
(PT4) paper types. However, there are also differences in reference values for
white (wb) and black (bb) backings which should not be underestimated.

Alongside stipulation of the reference values there are also tolerances for
the paper white and the inking of the process colors. These tolerances apply
for the make-ready phase when setting up the machine ready for printing.
Since actual production in offset printing is not absolutely stable, slightly
different tolerances apply here. In certain circumstances, the sum of permit-
ted deviations can lead to a situation where a print is quite different from the
actual standard. The goal of inking control when setting up a printing press
and then for subsequent production should be to stick as close to the specifi-
cations as possible.
The next graph shows the dot gain curves for coated and uncoated paper
at a screen frequency of 60 lines/cm. Although today’s standards state that
corrections must be made to the curves for other screen frequencies, in prac-
tice many operations use a single curve for a broad range of frequencies. This
is possible in computer-to-plate workflows due to process calibration.
10 Prinect Color Solutions – User Guide Standardization – An Overview

Slightly different tolerances apply for analog proof printing and OK

sheets as well as for production. In the worst case scenario, the tolerances
can be added to one another here as well. In principle this is permitted, al-
though it leads to poor printed results and disputes between customers and
print shops. As is the case with inking, the aim must be to remain as close as
possible to the standard during production using ink control.

Printing and Print Monitoring

Heidelberg supports the standardization of the production flows with regard
to color in various products at various workplaces. It is important that these
workplaces are networked using open interfaces and formats here. JDF (Job
Definition Format) and PPF (Print Production Format) are used to transport
information here. Measured color values are transferred using formats stand-
ardized by the ISO.
Inking-relevant information of a job is sent from Prinect MetaDimension
via Prinect Prepress Interface to Prinect CP2000 Center/Print Center, where
the default settings are made. Prinect CP2000 Center and Prinect Image
Control control the inking throughout the entire print job. Measured values
of step wedges are recorded using Prinect Image Control. The Calibration
Manager then calculates tonal corrections from this for plate setting with
MetaDimension. The evaluations created using Quality Monitor document
the level of standardization achieved for the ink. Prinect MetaDimension can
produce reference prints when connected to a proof printer for visual com-
parison of the print job. The profiling of the proof printer is done using
PrintOpen, while the quality control is performed by Quality Monitor. Using
a Heidelberg complete prepress and printing system is a good way to gain a
consistent color workflow.
 Standardization – An Overview Prinect Color Solutions – User Guide 11

Ink control takes place on Prinect CP2000 Center together with a suitable
spectral color measuring technology, preferably with Prinect Image Control/
Axis Control. Other measuring devices can also be used, although this involves
manual control.
Default characteristic curves for controlling the ink volumes of the ink
zones are defined on the Prinect CP2000 Center. With a full Heidelberg Work-
flow, the selection can be made automatically using the process parameters of
paper type (coated, uncoated), ink set (manufacturer) and color (cyan, magenta,
etc.). Using these parameters, in combination with the zonal area coverage
values on the printing plates of the individual colors, it is possible to quickly
find optimum inking across the entire sheet and thereby reduce waste to an
absolute minimum.
With Prinect Image Control or Prinect Axis Control, for example, the qua-
lity control strips can be measured and the measured values compared with
the reference values of the Process Standard defined in the devices. The print-
ing press is then adjusted using the correction values calculated from the
differences. The corrected default characteristic curves can be saved as new
default settings during a print job and then used in the next job.
 Standardization – An Overview Prinect Color Solutions – User Guide 11

Ink control takes place on Prinect CP2000 Center together with a suitable
spectral color measuring technology, preferably with Prinect Image Control/
Axis Control. Other measuring devices can also be used, although this involves
manual control.
Default characteristic curves for controlling the ink volumes of the ink
zones are defined on the Prinect CP2000 Center. With a full Heidelberg Work-
flow, the selection can be made automatically using the process parameters of
paper type (coated, uncoated), ink set (manufacturer) and color (cyan, magenta,
etc.). Using these parameters, in combination with the zonal area coverage
values on the printing plates of the individual colors, it is possible to quickly
find optimum inking across the entire sheet and thereby reduce waste to an
absolute minimum.
With Prinect Image Control or Prinect Axis Control, for example, the qua-
lity control strips can be measured and the measured values compared with
the reference values of the Process Standard defined in the devices. The print-
ing press is then adjusted using the correction values calculated from the
differences. The corrected default characteristic curves can be saved as new
default settings during a print job and then used in the next job.
 Standardization and Prinect CP2000 Center Prinect Color Solutions – User Guide 13

Standardization and
Prinect CP2000 Center
Standardization on the Prinect CP2000 Center means defining default charac-
teristic curves for controlling the ink volumes of the ink zones for defined
standardized printing conditions. The standardized printing conditions are
specified by the Offset Printing Process Standard or an internal company
standard. With a full Heidelberg Workflow, the characteristic curves can be
selected automatically using the process parameters of paper type (coated,
uncoated), ink set (manufacturer) and color name (cyan, magenta, etc.). For
the density value the measurement conditions have to be given.
The standardization on the Prinect CP2000 Center must always be seen in
context with the printing plate calibration in prepress and the control offered
by Prinect Image Control. Standardization here always means standardization
of the entire workflow.
It is important to note at this point that successful standardization requires
a well maintained and set-up printing press.

Creating a new Standard (Characteristic Curves)

The default characteristic curves for defined printing conditions are saved in
a database. New characteristic curves can be created and existing characteris-
tic curves adjusted. The ColorAssistant option offers help in achieving auto-
matic optimization of the ink presetting characteristic curve.
Several characteristic curves for ink presetting are set in the factory. For
each of the 3 paper types “glossy coated“, “matt coated” and “uncoated”, there
are 7 colors (black, cyan, magenta, yellow, special color 1, special color 2, special
color 3). These characteristic curves have the name HEIDELBERG. They can be
copied but not changed or deleted. They are the basis for customized charac-
teristic curves.
How to create new characteristic curves for the three paper types to meet
new printing conditions (new color sets, new density values) is described in
the manuals.
14 Prinect Color Solutions – User Guide Standardization and Prinect CP2000 Center

Working with Standards (Characteristic Curves)

A new job is loaded via the “Job/Job preparation” menu. The entry Prepress
Interface (PPF) should be selected as data source here. An automatic selection
of the characteristic curves is only possible via the Prepress Interface. Other-
wise the correct characteristic curves have to be selected manually.
If the job contains thumbnail images for perfecting, these are displayed.
If the PPF file has been transferred correctly, Prinect CP2000 Center automa-
tically takes over the correct paper type and paper description. This can be
checked in the “Job preparation/Printing material” menu. If necessary, correc-
tions can also be made here.
Users can check whether the color allocation has been made correctly in
the “Job preparation/Color allocation” menu. If necessary, corrections can
also be made here.

The “Job preparation/Color allocation” screen

In the top right of the screen you can see the “Glossy coated” paper type.
The ink set “916Champion” is displayed for the selected color “Magenta”.
Prinect CP2000 Center automatically selects the corresponding character-
istic curves for ink presetting based on the parameters of color, printing ma-
terial, ink set and desired inking.
 Standardization and Prinect CP2000 Center Prinect Color Solutions – User Guide 15

The “Color allocation/Define color/

Characteristic curves” screen

The characteristic curve selection can be checked in the “Color allocation/

Define color/Characteristic curves” menu. If necessary, corrections can also
be made here.
If no characteristic curve in the database has the right parameters, Prinect
CP2000 Center selects the best suited standard curve for the ink/printing
material combination.
How to work with characteristic curves for the three paper types and diffe-
rent color sets is described in the manuals.
16 Prinect Color Solutions – User Guide Standardization and Prinect Image Control

Standardization and
Prinect Image Control
Standardization in Prinect Image Control is based on the definition and appli-
cation of color sets and paper types for defined printing conditions. The spec-
tra and numerical values of the inks and paper are used for controlling.
A detailed description of procedures when creating and applying standards
goes beyond the scope of this brief introduction. It is extremely important that
users read the manual of the current Prinect Image Control software version
for details on this.

Creating a new Standard

Standards can be created and edited in the “Service” section under “Archives
Color”. The color database is called up via the “Color” button.
The color values in the archive are always saved with reference to their
paper white. If this is altered or if the job is printed using a different paper
white than the one saved in the color set, the color values are automatically
converted to match the altered paper white.

The Service dialog window –

Calling up the color archive

The local color database is located in the bottom left-hand part of the color
archive screen. There is a folder for each standard here, and a subfolder for
each paper type. This structural hierarchy helps the user manage a large num-
ber of color sets.
 Standardization and Prinect Image Control Prinect Color Solutions – User Guide 17

The Color Database screen –

Selecting a data record and a color

In our example the standard “ISO 12647-2 PSO” has been selected for glossy
coated paper “Glossy”. The color values and density values of the process colors
(B, C, M, Y) are displayed in the window to the right of this. The paper white (P)
and a gray value (G) are also displayed.
A color can now be selected for editing using the arrows on the right next
to the window. The values are displayed again in the top right section.
A new color set can also be defined by pressing the “New color set” button
in the lower section of the screen. The system then generates a new subfolder
with a color set name chosen by the user and the subfolders for the various
paper types (glossy, matt and mature, corresponding to glossy coated, matt
coated and uncoated). Copies are also created for all process colors, gray patches
and paper from the standard color set.
18 Prinect Color Solutions – User Guide Standardization and Prinect Image Control

The Color Database screen –

Entering new density values

When printing, the layer thicknesses or densities of process colors are

altered. This change is converted by the Prinect Image Control software into
changes of the inking values. The L*a*b* values cannot be changed directly
here.
Pressing the “D” button calls up a dialog for entering a new density value.
The value can be entered using the numeric keypad and then confirmed.

The Color Database screen –

New density and color values

Entering a new density value alters the L*a*b* values. The new values are
displayed in the lower section of the screen.
 Standardization and Prinect Image Control Prinect Color Solutions – User Guide 19

Working with Standards

New jobs are set up in the “New Job” menu. In the “New Job” screen you can
select a color set and a paper.
The “Color set” button must be highlighted to select a new color set. The
“Paper” button must be highlighted to select the right paper type. By selecting
a color set and the correct paper type you ensure that the right reference val-
ues are automatically copied from the database for the process inks.

The New Job screen – Selecting color set

and paper

How to work with color sets and paper types is described in detail in the
manuals.
20 Prinect Color Solutions – User Guide Standardization and Quality Monitor

Standardization
and Quality Monitor
The Quality Monitor is part of the Prinect Profile Toolbox and the Prinect
Calibration Tool-box. The software is used to monitor, assess and document
device and process calibrations. Film and plate exposure devices as well as
printing and proof printing processes can be monitored. Various aids are
provided for this and various measuring devices are supported.
With the measuring functions of the Quality Monitor you can perform a
manual or automatic measurement of test elements or quality control strips
with spectrophotometers, densitometers or plate measurement devices that
are directly connected. Measured values can be imported or exported in the
ISO format in line with the ISO standard 12642. Prinect Image Control and
non-supported measuring devices can also be integrated into the assessments
using the import function.
The Quality Monitor supports various predefined CMYK, CMY and RGB test
elements, CMYK monitoring elements and linearization wedges, which can be
selected to match the desired check. The size of the test elements ranges from
135 up to 1,485 color fields, while the other elements have between 7 and 210
color fields. Every test chart and every monitoring element has its own special
layout, which is partially adjusted to an automatic measurement by strip
readers. The elements can be scaled to allow a measurement with Prinect
Image Control.

Comparison with the reference values gives a good assessment of quality.

Reference values can be both measured values (comparison with a good sheet)
and predefined standards (ISO 12647-2 process control). Standards can be set
up by the user and tolerances can also be specified for the process values here.

Creating a new Standard

In the “Measurement” main program function you can perform a comparison
of the measured values with the values of a standard while the measured data
is open (in the example further down a quality control strip has been imported)
by selecting the “Process standard” function.
In this window you can select a predefined standard and also define and
manage your own standards. After calling up the “New standard” window you
can set the parameters.
 Standardization and Quality Monitor Prinect Color Solutions – User Guide 21

The “Measurement” program function

with imported or measured test chart
(quality control strip)

The screen is preassigned with the values of the standard last selected. You
can modify these values and save them as a new standard, enter all new values
and then save these as a standard or simply accept the current measured values
as a standard. In the example shown below an international standard in line
with ISO 12647-2:2004 has been defined for sheet-fed offset printing for paper
type 1 and a dot gain defined for a screen frequency of 60/cm.

Creating a new process standard

The name of the standard and the description of the printing material can
be entered as free text which is later used to select the standard. The dot gains
and tolerances are specified for the process colors C, M und Y together, while
for the process color K a different specification may be made. In the lower
section of the screen the specifications for inking and the density values of
the process colors are entered. The check boxes allow you to specify which
values should be used for the evaluation. By hitting “OK” the values are saved
and the window closed.
22 Prinect Color Solutions – User Guide Standardization and Quality Monitor

Comparison of Measured Values and Standards

In the “Process standard” screen the current measured values are compared
with the standard selected in the right-hand section of the screen. However,
dot gain and density comparisons are only performed if the measured values
offer this information. This is the case when the spectra are also saved. This
option should always be switched on when measuring. Measured values that
are extracted from profiles do not have this information. This generally also
applies to measured values from characterization data.

Checking measured data to ensure it meets

the process standard

The dot gain is checked in the top part of the window. The area highlighted
green in the graphs is the tolerance range of the standard. The curves should
ideally lie in the center of the tolerance range. In the small table on the right
you can see the numeric values and the deviation from the set points for the
40 % and 70 % fields. An evaluation is also performed of the spread, the maxi-
mum difference in dot gain of the chromatic process colors.
The inking values and the densities are displayed in the lower part of the
window. The color bars indicate the magnitude of the deviation. The tolerance
values are shown in the graph as small vertical lines. The deviations from the
set points are shown again on the right in numeric form.
 Standardization and Quality Monitor Prinect Color Solutions – User Guide 23

Using Measured Values as Standards

In the “Comparison” main program function you can compare two sets of
measured data with one another. Similarly to the comparison with the process
standard described above, the dot gain, densities and color values of the pro-
cess colors are compared with one another in the “CIE report” section. This
function is particularly useful if you wish to specify a print as a reference for
subsequent prints. Reference data and comparison data must come from the
same test charts and should also contain spectral measured values if you wish
to perform an evaluation of the dot gain and density.

Comparing two data records

In the top part of the window there is an overall assessment using a mark
on a colored bar. The left-hand green section represents a comparison where
all comparison values are essentially within tolerances. The central yellow
section displays a critical print and the right-hand red section a print that is
well outside tolerances.
The other displays represent the evaluation of the process standard. The
paper white, average value, spread and maximum value over all fields of the
test chart are also evaluated and displayed in the color values section.
24 Prinect Color Solutions – User Guide Standardization and Calibration Manager

Standardization
and Calibration Manager
The Calibration Manager is a piece of software used to generate calibration
curves. Calibration curves control the tone value reproduction on film or
printing plate and are used when a job is imaged (exposure). They adjust the
digital data to the individual steps of a printing process to get the desired out-
put. Calibration curves can consist of combinations of linearization and pro-
cess calibration curves. Process calibrations are created for paper and print-
ing inks to achieve a defined dot gain.

Creating a new Standard

The dot gain curves or sets of process curves are created and managed in the
“Administration” program function. There are three predefined sets of curves
to match the current ISO Standard 12647-2:2004. The user can also easily cre-
ate new sets of curves.

Creating a new set of process curves

Clicking on the “New” button calls up a window where the name of a new
set of curves can be entered. After hitting “OK” a user-defined data record is
recorded which can be opened by hitting “Open” to define the further para-
meters.
 Standardization and Calibration Manager Prinect Color Solutions – User Guide 25

Selecting the curves to be generated

First of all you specify which process curves should be created as target
curves for a calibration. With an ISO Standard the curves of the chromatic
process colors are the same, and black has a 3 % higher dot gain. So two curves
are created, one for CMY and one for K. However, you can also create four in-
dividual curves. This makes sense in certain cases, especially when users wish
to employ different curves as a way of adjusting the gray balance.

Set of process curves ready for entry of

parameters
26 Prinect Color Solutions – User Guide Standardization and Calibration Manager

The process curve for which parameters are to be entered is selected by

hitting the “Open” button.

Entering parameters for a set of

process curves

In the “Process %” column the reference values are entered for the nomi-
nal values. Individual pairs of values can be deleted. Additional pairs of values
can also be inserted. In the graph the tone values and optionally also the dot
gain values are displayed. Hitting “OK” saves the values, which can then be
used as a standard for the calibration.

Creating a new Process Calibration

New calibration groups are created and managed in the “Process calibration”
section. The process is started by hitting the “New” button. The name, device,
device type and category are specified in the window that then appears.

Creating a new calibration group for a

process calibration
 Standardization and Calibration Manager Prinect Color Solutions – User Guide 27

After clicking on “OK”, parameters can be entered for this calibration

group by hitting the “Open” button.

Entering parameters for the

calibration group

A set of process curves is selected. After entering all the other parameters
and clicking on “OK”, this calibration group can be called up again and meas-
ured values entered. The process calibration is calculated from the comparison
of the measured values with the process curves. This is then used to image the
printing plates.
28 Prinect Color Solutions – User Guide Standardization and PrintOpen

Standardization and PrintOpen

With PrintOpen, ICC profiles of calibrated and monitored print and proof
printing processes are created. Parameters of the processes themselves are
also optional components of the profiles. These are saved in defined tags and
can be used during the subsequent processes as a means of monitoring. And
many of the parameters can also be copied back from the data in the profile.
For example, the paper white and the process colors are given in the tables
with the relative/absolute rendering intent. The dot gain values are also inclu-
ded, but in a form unlike their typical depiction. However, users can draw on
these for comparison purposes.

Creating a New Standard

In the “Measurement” main program function you can perform a comparison
of the measured values with the values of a standard while the measured data
is open (in our example a characterization data record based on the test element
ECI2002 has been imported) by selecting the “Process standard” function.

The “Measurement” program function with

imported or measured test chart

In this window you can select a predefined standard and also define and
manage your own standards. After calling up the “New standard” screen you
can set the parameters.
 Standardization and PrintOpen Prinect Color Solutions – User Guide 29

The window is preassigned with the values of the standard last selected.
You can modify these values and save them as a new standard, enter all new
values and then save these as a standard or simply accept the current measured
values as a standard. In the example shown below an international standard
in line with ISO 12647-2:2004 has been defined for sheet-fed offset printing for
paper type 1 and a dot gain defined for a screen frequency of 60/cm.

Creating a new process standard

The name of the standard and the description of the printing material can
be entered as free text which is later used to select the standard. The dot gains
and tolerances are specified for the process colors C, M und Y together, while
for the process color K a different specification may be made. In the lower
section of the window the specifications for inking and the density values of
the process colors are entered. The check boxes allow you to specify which
values should be used for the evaluation. By hitting “OK” the values are saved
and the window closed.
30 Prinect Color Solutions – User Guide Standardization and PrintOpen

Comparison of Measured Values and Standards

In the “Process standard” screen the current measured values are compared
with the standard selected in the right-hand section of the screen. However,
dot gain and density comparisons are only performed if the measured values
offer this information. This is the case when the spectra are also saved. This
option should always be switched on when measuring. Measured values that
are extracted from profiles do not have this information. This generally also
applies to measured values from characterization data.

Checking measured data to ensure it meets

the process standard

The dot gain is checked in the top part of the window. The area highlighted
green in the graphs is the tolerance range of the standard. The curves should
ideally lie in the center of the tolerance range. In the small table on the right
you can see the numeric values and the deviation from the set points for the
40 % and 70 % fields. An evaluation is also performed of the spread, the maxi-
mum difference in dot gain of the chromatic process colors.
The inking values and the densities are displayed in the lower part of the
window. The color bars indicate the magnitude of the deviation. The tolerance
values are shown in the graph as small vertical lines. The deviations from the
set points are shown again on the right in numeric form.
 Standardization and PrintOpen Prinect Color Solutions – User Guide 31

Adjusting Measured Values to Standards

PrintOpen provides a range of functions for converting measured characteri-
zation data. The simplest method is a conversion based on values of the prima-
ry colors C, M, Y and K and the new paper white. These values can be taken
from a process standard. More complex methods, which will not be discussed
here, can also be used to adjust the secondary colors to reference values. There
is also the possibility to adjust the dot gain to standards.
In the main “Measurement” program function you can use the “Special”
menu item to call up the “Conversion of color data – color values” function
when measured data is open.

Converting measured color data for

adjustment to standards

On the left-hand side of the screen we can see the current color values and
dot gains for the paper white and process colors. On the right-hand side users
can now enter new values, for example those of the process standard. It is im-
portant to note that the values for dot gain were not determined from the den-
sity values but rather from the colorimetric values. They differ significantly
from the typical values for cyan, but less for magenta. The values for yellow
and black are comparable. So if we now know from the comparison in the pre-
vious section that the dot gain in cyan is only 12 % instead of the required 13 %,
we can increase the value for cyan in the screen shown above from 10.4 % to
around 11.3 % in this case (10.4 %/12.0 % * 13.0 %).
After clicking “OK”, the measured color data is then converted to a new
standard.
32 Prinect Color Solutions – User Guide Appendix

Appendix: Overview
of Important Standards
ISO 2846-1:1997
Graphic technology – Colour and transparency of ink sets for four-colour-printing –
Part 1: Sheet-fed and heat-set web offset lithographic printing
As its title suggests, this international standard specifies the inking and trans-
parency of printing ink sets for 4-color offset printing. It does this by laying
down standardized conditions for testing printing inks under laboratory con-
ditions with special devices as well as specifying a suitable paper (coated, wood-
free, without optical brighteners, Scheufelen Phoenix Imperial APCO II/II).
The measurement of inking is performed in line with ISO 13655 with a white
backing. The color values must stay within tolerances laid down by the refer-
ence values of the standard within a defined layer thickness range. A defined
transparency of the color must also be maintained to ensure that accurate
color values can be achieved in subsequent combined printing. The only way
to check colors against this standard is in the laboratory.
The standard is currently being revised.

ISO 12642:1996
Graphic technology – Prepress digital data exchange – Input data for characterization
of 4-colour process printing
As its title suggests, this international standard specifies a data record and a
data exchange format for measured values to characterize 4-color printing
processes. The standard is also known under the name IT8.7/3. The data record
consists of common combinations of chromatic printing ink tone values,
some of which are also defined with tone values for black printing ink. The
measured color values that accompany these tone value combinations describe
the achievable printing color space and the behavior when printing the colors
together.
The standard is currently being revised and a second part is being added.
This “Part 2” describes a further data record for improved measurement of
the combined printing behavior. The standard is also known under the names
ECI2002 and IT8.7/4. It is complemented by the DIN standard 16614, which
described the data record of the ECI2002.

ISO 12647-2:2004
Graphic technology – Process control for the manufacture of half-tone colour separa-
tions, proof and production prints – Part 2: Offset lithographic processes (2004)
This part of the international standard ISO 12647 describes process monitor-
ing for continuous tone color separations, proof prints and print production
in offset printing.
• Stipulation of the parameters for film and plate exposure:
screen frequency, screen angle, dot shape, tone value sum
• Stipulation of paper types and their properties:
color coordinates, gloss, grammage and tolerances
• Stipulation of inking in sets of printing inks and their overprinting on the
various paper types
 Appendix Prinect Color Solutions – User Guide 33

• Stipulation of dot gain in printing for chromatic colors and black,

whereby black typically has 3% more dot gain
• Stipulation of tolerances for solids, dot gain and spread of chromatic
colors
• Stipulation of measurement conditions for color measurement:
illuminant D50, 2° viewing angle, 0/45 or 45/0 geometry, no polarization
filter, black measurement backing. Measured values for white measurement
backings are given as extra information
The standard is currently being revised and is to include informative color
values for overprinting the process colors.

ISO 13655:1996
Graphic technology – Spectral measurement and colorimetric computation for
graphic arts images
As its title suggests, this international standard describes the spectral measure-
ment and colorimetric calculation of graphic arts images. It describes the re-
quirements of spectral data measurement, such as calibration, spectral energy
distribution and wavelength range of the illumination, measuring geometry
and sample backing. In addition, the requirements of colorimetric calculation,
such as illuminant D50, 2° standard viewing angle, weighting coefficients for
spectral values, algorithms for calculating the color values CIEXYZ and the
calculation of derived factors (CIELAB, CIELCH, Delta E) are all given.
There are currently plans to revise the standard.

ISO 15076-1: 2005

Image Technology – ICC Colour Management – Architecture, profile format, and data
structure
This international standard describes a color management architecture with
colorimetrically defined reference color spaces and a profile format specifi-
cation for the exchange of color data between various input and output de-
vices. The reference color spaces CIEXYZ and CIELAB are based on the illumi-
nant D50. The profile format specification is tag-oriented and describes the
color properties of the devices together with preferred reproduction of digital
image data.

ISO 15930-3:2002
Graphic technology – Prepress digital data exchange – Use of PDF – Part 3: Complete
exchange suitable for colour-managed workflows (PDF/X-3)
This part of the international standard ISO 15930 describes the application of
Adobe’s Portable Document Format (PDF) for the exchange of digital data in a
document. The document contains all specifications that are necessary for
output in a printing process. In particular, the document contains ICC profiles
for accurate color reproduction.
34 Prinect Color Solutions – User Guide Appendix

Offset Printing Process Standard (ProzessStandard Offsetdruck) 2001/2003

Ways to achieve constant quality from prepress right up to the printed product –
Published by The German Printing and Media Industries Federation (bvdm)
The Process Standard was published by the German Printing and Media Indus-
tries Federation (bvdm) in 2001. With supplements in 2003 it now represents
an extended national implementation of the ISO Standard 12647-2.
It contains
• a description of the inspection methods and work tools,
• a description of the processes,
• a description of the requirements of data and films,
• a description of the requirements of proof printing and on-press proofing,
• a description of the requirements of printing plate manufacture and
production printing.
Since 2003 it has incorporated the contents of the current ISO Standard from
2004.
The standard is currently being revised and will then be re-released with
the changes of the ISO Standard 12647-2.

Print Media Standard (MedienStandard Druck) 2004

Technical guidelines for data and proof printing – published by the German Printing
and Media Industries Federation (bvdm)
The Print Media Standard is made up of various modules, and it is the user’s
own responsibility to ensure that these are organized and implemented cor-
rectly. The guidelines of the Print Media Standard contain information on all
significant components required for correct application in the individual
printing processes. This includes characterization data, ICC profiles and re-
quirements of color management. It reflects the current level of standardiza-
tion and is regularly adjusted to the latest developments. It is consistent with
ISO 12647-2, -3 and -4 as well as the Offset Printing Process Standard.
The standard is currently being revised.

Altona Test Suite 2004/2005

Application Package – Reference prints, inking standards, Test Suite files, character-
ization data, ICC profiles, documentation – Published by the German Printing and
Media Industries Federation (bvdm)
Altona Test Suite is a joint venture of the German Printing and Media Indus-
tries Federation (bvdm) in Wiesbaden, the European Color Initiative (ECI),
EMPA/Ugra St. Gallen and the print research company FOGRA in Munich. The
application suite consists of reference prints and inking standards that have
been produced carefully to tight tolerances. The package also includes a CD-
ROM with Test Suite files, characterization data and ICC profiles in line with
standard printing conditions according to ISO 12647. Comprehensive docu-
mentation describes in detail the elements of the Altona Test Suite and how to
use them. It also supplies all information needed for standardized process
monitoring. The Altona Test Suite consists of a set of PDF files that have been
developed specifically for inspecting digital output devices – and in particular
proof printing solutions, conventional and digital printing systems.
 Appendix Prinect Color Solutions – User Guide 35

Ugra/FOGRA Media Wedge 2.0

Published by Ugra and Fogra
Media Wedges are used to check proof prints. The UGRA/FOGRA Media Wedge
consists of solid ink patches and continuous tone patches, overprinting, step
wedges in gray and step-by-step to neutral composite gray. The specifications
come from the current FOGRA characterization data and correspond to those
of the Altona Test Suite. Comparing measured values and specifications gives
a good assessment of quality.

Characterization data 2004

Published by Fogra, IFRA and ECI
Characterization data in line with ISO 12642 or DIN 16614 is provided for stand-
ard printing methods (offset printing, gravure printing, newspaper printing)
and paper. It currently represents the best possible approximation to the
standards and is based on real printing conditions, paper and printing inks.
The characterization data is the basis of the Altona Test Suite and the Ugra/
FOGRA Media Wedge. It has been created in line with the guidelines of the
Offset Printing Process Standard and the corresponding guidelines for news-
paper printing and gravure printing.

Standard profiles 2004

Published by IFRA and ECI
ICC profiles in line with ISO 15076 are required for color separation and print
monitoring. They are based on the current characterization data and should
reflect a realistically achievable print result.
Publishing Information Trademarks
Printed in: 02/06 Heidelberg, the Heidelberg logotype, and Linotype-Hell are

00.000.0000
Photographs: Heidelberger Druckmaschinen AG registered trademarks of Heidelberger Druckmaschinen
Fonts: HeidelbergGothicMl AG in the U.S. and other countries. All other trademarks are
Author: Dr. Guenter Bestmann property of their respective owners.
Printed in Germany
Subject to technical modifications and other changes.

Heidelberger Druckmaschinen AG
Kurfuersten-Anlage 52–60
69115 Heidelberg
Germany
Phone +49 6221 92-00
Fax +49 6221 92-6999
www.heidelberg.com