Datasheet Isys-4000-Series - Cable Set
Datasheet Isys-4000-Series - Cable Set
Datasheet Isys-4000-Series - Cable Set
www.InnoSenT.de
Cable Set
Version 1.1 - 30.06.2016
T
Version 1.1
FEATURES:
»» easy to use
»» no additional power source needed
»» rugged cable
Cable Set
DESCRIPTION CERTIFICATES
Use the iSYS-4000-Series Cable Set to connect a
iSYS-4000-Series
InnoSenT GmbH has established and applies a
iSYS-4000-Series device with a personal computer
quality system for: development, production and
and the power supply.
sales of radar sensors for industrial and automotive
sensors.
DATA SHEET
InnoSenT Standard Product. Changes will not be This product is compliant to the restriction of
notified as long as there is no influence on form, fit hazardous substances (RoHS - European Union
and within this data sheet specified function of the directive 2011/65/EU).
product.
Page 1
DESCRIPTION
Use the iSYS-4000-Series Cable Set to connect a iSYS-4000-Series device with a personal computer and the power
supply.
»» iSYS-prog_adap / IT2954: Splits the cables into a Sub-D connector to provide a standard serial port for
communication equipment and an M12 connector with the remaining lines for supply and the programmable
outputs OUT1- OUT3. Use this cable to establish the data link between the processing equipment (PC running
the InnoSenT GUI) and the iSYS-4000-Series Sensor.
»» iSYS-pow_adap / IT3075: Splits the remaining wires to connect a power supply and OUT1 – OUT3.
»» iSYS-pow_sup / IT3102: Wall mount DC supply.
T
iSYS-prog_adap / IT2954
Version 1.1
The sensor provides an M12x8 Connecter type
Cable Set
9 5
M1 2
M1 2
4
RS232-Connector
iSYS-4000-Series
Buchse M12x8 1 OUT1 1 Stecker M12x8 2 1
Buchse M12x8 2 OUT2 2 Stecker M12x8 8
3 7
Buchse M12x8 3 OUT3 3 Stecker M12x8
PARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITS
Buchse M12x8 5 VCC 5 Stecker M12x8 4 6
Current
Buchse M12x8 6 GND 6 Stecker M12x8 5
Schemazeichnung
Connector 1 M12 female
5
4 6
3 8 7
2 1
WWzVLW,HpoligLWHkodiertLWW
PIN # DESCRIPTION IN / OUT COMMENT
1 OUT1 output
T
2 OUT2 output
3 OUT3 output
Maßzeichnung
Version 1.1
4 Boot Mode input do not connect in operation
8 RS232_Tx / RS485_B 1
output when using RS485 input / output
SW17
SW18
PG9
1
Depending on version of iSYS-4000-Series this is either RS232 or RS485
Cable Set
Technische Daten:
Bemessungsspannung: 4pol 5pol 8pol
max.4, 5 IEC 61076-2-101 250 V 60 V 30 V
Connector 2 M12 male
Strombelastbarkeit: 4/5pol 8pol
M12x1 IEC 61076-2-101 4 A bei 40°C 2 A bei 40°C
2 1
Isolationswiderstand: >=100 M
usteckverbinder IEC 60512 Ω
3 8 7 Verschmutzungsgrad: 3/2
IEC 60664-1
Schutzart: IP 67, im
O-Ring IEC 60529 verschraubten Zustand
4 6
iSYS-4000-Series
Umgebungstemperatur: -30°C ... +85°C
5 EN 60512-11-10 -40°C
EN 60512-11-4 -40°C ... +85°C
UL 2238 -30°C ... +85°C
L
Steckzyklen: >=100
PIN # DESCRIPTION IN / OUT COMMENT
IEC 60512-9a
45°
45°
Page 3
9° 33
6x4 °
CONFIDENTIAL AND PROPRIETARY
The information contained in this document
Layout shall remain the sole and exclusive property of InnoSenT GmbH and shall not be
disclosed by the Leiterplatte n 1,2
recipient to third parties without prior consent of InnoSenT in writing.
Experience and Reliability in Radar Technology
www.InnoSenT.de
Connector 3 Sub-D-9-female
T
2 RS232_Tx / RS485_B1 in /out when using RS485 input / output
Version 1.1
4 d.n.c. do not connected (Boot Mode)
5 GND GND
Cable Set
iSYS-4000-Series
DATA SHEET
Page 4
iSYS-prog_adap / IT3075
M1 2
2 1
Input
3 8 7
T
Connector DESCRIPTION COMMENT
Lz,ßMWWHWzllP,bß
1 M12 8 pins female mates with iSYS-4000-Series or iSYS-prog_adap
Version 1.1
2 M12 8 pins male mates with iSYS-pow_sup IT3102
Schemazeichnung
Connector 1 M12 female
5
4 6
Cable Set
3 8 7
2 1
PIN # DESCRIPTION IN / OUT COMMENT
WWzVLW,HpoligLWHkodiertLWW
1 OUT1 output
2 OUT2 output
iSYS-4000-Series
3 OUT3 output
max.4, 5
ckverbinder
PIN # DESCRIPTION IN / OUT COMMENT
inner tip VCC input supply voltage (DC 10...30V)
T
iSYS-powersupply / IT3102
Version 1.1
Set output voltage to 12V. Use the matching DC-Plug
Cable Set
adapter. Make sure the arrow
points at the correct polarity as
shown Inner+/ Outer -
iSYS-4000-Series
outer ring GND input GND
APPROVAL
This Data Sheet contains the technical specifications of the described product. Changes of the specification must
DATA SHEET
be in written form. All previous versions of this Data Sheet are no longer valid.
InnoSenT GmbH