Add-In Installation Manual
Uploaded by
Uriel Jefferson MadrelejosAdd-In Installation Manual
Uploaded by
Uriel Jefferson MadrelejosManual Installation
Your version of Excel may not be recognized by the .msi package. No worries; just
follow this manual installation/configuration
process:
1.)Download the .xlam file from here
2.)Move the downloaded file to the �C:/Add-ins� folder (or create the folder if it
does not exist)
3.)Open Excel, go to File->Options choose �Trust Center� from the left menu bar,
then click �Trust Center Settings� on the
right in the panel
4.)Now choose �Macro Settings� on menu bar on the left, and select �Enable all
macros (not recommended; potentially dangerous macros
can run� AND check the box at bottom �Trust access to the VBA object module�.
(choosing these settings allows the Add-in to initialize when loaded)
5.)Click �ok� at bottom
6.)Now choose �Customize Ribbon� from the menu bar on the left. In the panel on the
right, check the �Developer� box
7.)Click �ok�
8.)Now click on the �Developer� tab on the ribbon bar, and �Excel Add-ins� on the
toolbar
9.)Click on �Browse� button, and navigate to the �C:\Add-ins� folder and select the
�thermotables.xlam� file you downloaded.
10.) Click �OK� to close the Excel Add-ins window
