Scribd
Upload
143 views1 page

NCP 12700

The NCP12700 is a current mode PWM controller that can be used for single-ended power converter topologies. It has a wide input voltage range of 9-120V and supplies at least 20mA of current during startup. The controller offers features like soft-start, input undervoltage lockout protection, and over-power protection to limit power at high input voltages. It has a 1A/2.8A gate driver and supports applications such as isolated DC-DC converters, flyback converters, and forward converters.

Uploaded by

Manoel Camargo Sampaio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
143 views1 page

NCP 12700

The NCP12700 is a current mode PWM controller that can be used for single-ended power converter topologies. It has a wide input voltage range of 9-120V and supplies at least 20mA of current during startup. The controller offers features like soft-start, input undervoltage lockout protection, and over-power protection to limit power at high input voltages. It has a 1A/2.8A gate driver and supports applications such as isolated DC-DC converters, flyback converters, and forward converters.

Uploaded by

Manoel Camargo Sampaio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Overview

NCP12700: Ultra Wide Input Current Mode PWM Controller

For complete documentation, see the data sheet.

The NCP12700 is a fixed frequency, peak current mode, PWM controller containing all of the features necessary for implementing
single-ended power converter topologies. The device features a high voltage startup capable of operating over a wide input range (9
– 120/200 V MSOP10/WQFN10) and supplying at least 20 mA to provide temporary bias to VCC during system startup.
The controller offers an adjustable soft-start, input voltage UVLO protection, and an adjustable Over-Power Protection circuit which
limits the total power capability of the circuit as the input voltage increases, easing the system thermal design. The UVLO pin also
features a shutdown comparator which allows for an external signal to disable switching and bring the controller into a low quiescent
state.

Features Benefits
• Wide Input Range (9 – 120/200 V; MSOP10/WQFN10) • Simplify design and reduce BOM cost
• Current Mode Control with Integrated Slope Compensation • No sub-harmonic oscillation in CCM mode .
• Single Resistor Programmable Oscillator • Easy and flexible
• 1 A / 2.8 A Source / Sink Gate Driver • Drive any type of MOSFET's
• Input Voltage UVLO with Hysteresis • To protect the design or bring the controller into a low
quiescent state
• Several Fault Protections: • Robust and safe design
- User Adjustable Over-Power Protection
- Overload Protection with 30 ms Overload Timer
- NTC-Compatible Fault Interface for Thermal Protection
- Output OVP Fault Interface<BR- Fault Auto-recovery Mode
with 1 s Auto-recovery Period

Applications End Products


• Low to medium voltage isolated DC-DC • Telecom DC-DC Modules
• CCM & DCM Flyback Converters • Industrial power converters
• Forward converters • Railway DC-DC Modules

Part Electrical Specifications


Product Compliance Status Topolog Control fsw Typ Stand- UVLO Short Latch Soft VCC Max Drive Packag
y Mode (kHz) by Mode (V) Circuit Start (V) Cap. e Type
Protecti (mA)
on
NCP12700ADNR2G Pb-free NEW Flyback Current 100 kHz Yes 8.5 Yes Yes Yes 30 1000 / MSOP-
Mode up to 1 2000 10
Halide free MHz

NCP12700BDNR2G Pb-free NEW Flyback Current 100 kHz Yes 8.5 Yes Yes Yes 30 1000 / MSOP-
Mode up to 1 2000 10
Halide free MHz

NCP12700BMTTXG Pb-free NEW Flyback Current 100 kHz Yes 8.5 Yes Yes Yes 30 1000 / WQFN-
Mode up to 1 2000 10
Halide free MHz

For more information please contact your local sales support at www.onsemi.com.
Created on: 5/12/2018

You might also like