74HC HCT154 PDF
74HC HCT154 PDF
74HC HCT154 PDF
1. General description
The 74HC154; 74HCT154 is a 4-to-16 line decoder/demultiplexer. It decodes four binary
weighted address inputs (A0 to A3) to sixteen mutually exclusive outputs (Y0 to Y15). The
device features two input enable (E0 and E1) inputs. A HIGH on either of the input
enables forces the outputs HIGH. The device can be used as a 1-to-16 demultiplexer by
using one of the enable inputs as the multiplexed data input. When the other enable input
is LOW the addressed output will follow the state of the applied data. Inputs include clamp
diodes. This enables the use of current limiting resistors to interface inputs to voltages in
excess of VCC.
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74HC154D 40 C to +125 C SO24 plastic small outline package; 24 leads; body width 7.5 mm SOT137-1
74HCT154D
74HC154DB 40 C to +125 C SSOP24 plastic shrink small outline package; 24 leads; body width SOT340-1
74HCT154DB 5.3 mm
74HC154PW 40 C to +125 C TSSOP24 plastic thin shrink small outline package; 24 leads; body SOT355-1
74HCT154PW width 4.4 mm
74HC154BQ 40 C to +125 C DHVQFN24 plastic dual in-line compatible thermal enhanced very thin SOT815-1
74HCT154BQ quad flat package; no leads; 24 terminals; body
3.5 5.5 0.85 mm
Nexperia 74HC154; 74HCT154
4-to-16 line decoder/demultiplexer
4. Functional diagram
$ $ $ $
(
'(&2'(5
(
< < < < < < < < < < < < < < < <
DDE
'; ;<
*
$ <
<
$
$
$
<
(
( (1 (1
<
DDE DDE
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
( ( $ $ $ $
< < < < < < < < < < < < < < < <
DDE
5. Pinning information
5.1 Pinning
+&
+&7
9&&
WHUPLQDO
<
+& LQGH[DUHD
+&7
< $
< 9&& < $
< $ $
<
< $ $
<
< $ < (
< $
< (
< (
< <
< ( <
<
< <
< 9&& <
< <
< <
< <
*1'
<
< <
DDE
*1' <
DDE 7UDQVSDUHQWWRSYLHZ
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
6. Functional description
Table 3. Function table[1]
Input Output
E0 E1 A0 A1 A2 A3 Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15
H H X X X X H H H H H H H H H H H H H H H H
H L X X X X H H H H H H H H H H H H H H H H
L H X X X X H H H H H H H H H H H H H H H H
L L L L L L L H H H H H H H H H H H H H H H
H L L L H L H H H H H H H H H H H H H H
L H L L H H L H H H H H H H H H H H H H
H H L L H H H L H H H H H H H H H H H H
L L H L H H H H L H H H H H H H H H H H
H L H L H H H H H L H H H H H H H H H H
L H H L H H H H H H L H H H H H H H H H
H H H L H H H H H H H L H H H H H H H H
L L L H H H H H H H H H L H H H H H H H
H L L H H H H H H H H H H L H H H H H H
L H L H H H H H H H H H H H L H H H H H
H H L H H H H H H H H H H H H L H H H H
L L H H H H H H H H H H H H H H L H H H
H L H H H H H H H H H H H H H H H L H H
L H H H H H H H H H H H H H H H H H L H
H H H H H H H H H H H H H H H H H H H L
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.5 +7.0 V
IIK input clamping current VI < 0.5 V or VI > VCC + 0.5 V [1] - 20 mA
IOK output clamping current VO < 0.5 V or VO > VCC + 0.5 V [1] - 20 mA
IO output current 0.5 V < VO < VCC + 0.5 V [1] - 25 mA
ICC supply current [1] - 50 mA
IGND ground current [1] - 50 mA
Tstg storage temperature 65 +150 C
Ptot total power dissipation Tamb = 40 C to +125 C [2] - 300 mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SO24 packages: Ptot derates linearly at 8 mW/K above 70 ×C.
For SSOP24 and TSSOP24 packages: Ptot derates linearly at 5.5 mW/K above 60 ×C.
For DHVQFN24 packages: Ptot derates linearly at 4.5 mW/K above 60 ×C.
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
9. Static characteristics
Table 6. Static characteristics 74HC154
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
Tamb = 25 C
VIH HIGH-level input voltage VCC = 2.0 V 1.5 1.2 - V
VCC = 4.5 V 3.15 2.4 - V
VCC = 6.0 V 4.2 3.2 - V
VIL LOW-level input voltage VCC = 2.0 V - 0.8 0.5 V
VCC = 4.5 V - 2.1 1.35 V
VCC = 6.0 V - 2.8 1.8 V
VOH HIGH-level output voltage VI = VIH or VIL
VCC = 2.0 V; IO = 20 A 1.9 2.0 - V
VCC = 4.5 V; IO = 20 A 4.4 4.5 - V
VCC = 6.0 V; IO = 20 A 5.9 6.0 - V
VCC = 4.5 V; IO = 4.0 mA 3.98 4.32 - V
VCC = 6.0 V; IO = 5.2 mA 5.48 5.81 - V
VOL LOW-level output voltage VI = VIH or VIL
VCC = 2.0 V; IO = 20 A - 0 0.1 V
VCC = 4.5 V; IO = 20 A - 0 0.1 V
VCC = 6.0 V; IO = 20 A - 0 0.1 V
VCC = 4.5 V; IO = 4.0 mA - 0.15 0.26 V
VCC = 6.0 V; IO = 5.2 mA - 0.16 0.26 V
II input leakage current VCC = 6.0 V; VI = VCC or GND - - 0.1 A
ICC supply current VCC = 6.0 V; VI = VCC or GND; IO = 0 A - - 8.0 A
CI input capacitance - 3.5 - pF
Tamb = 40 C to +85 C
VIH HIGH-level input voltage VCC = 2.0 V 1.5 - - V
VCC = 4.5 V 3.15 - - V
VCC = 6.0 V 4.2 - - V
VIL LOW-level input voltage VCC = 2.0 V - - 0.5 V
VCC = 4.5 V - - 1.35 V
VCC = 6.0 V - - 1.8 V
VOH HIGH-level output voltage VI = VIH or VIL
VCC = 2.0 V; IO = 20 A 1.9 - - V
VCC = 4.5 V; IO = 20 A 4.4 - - V
VCC = 6.0 V; IO = 20 A 5.9 - - V
VCC = 4.5 V; IO = 4.0 mA 3.84 - - V
VCC = 6.0 V; IO = 5.2 mA 5.34 - - V
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
VCC = 4.5 V - 16 35 - 44 53 ns
VCC = 5 V; CL = 15 pF - 13 - - - - ns
En to Yn; see Figure 8
VCC = 4.5 V - 15 32 - 40 48 ns
VCC = 5 V; CL = 15 pF - 13 - - - - ns
tt transition time see Figure 7 and 8 [2]
VCC = 4.5 V - 7 15 - 19 22 ns
CPD power dissipation per gate; VI = GND to [3] - 60 - - - - pF
capacitance (VCC 1.5 V)
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
11. Waveforms
9, 9,
$QLQSXW 90 90 (QLQSXW 90 90
*1' *1'
W 3+/ W 3/+ W3+/ W3/+
92+ 92+
<QRXWSXW 90 90 <QRXWSXW 90 90
92/ 92/
W 7+/ W 7/+ W 7+/ W 7/+
DDE DDE
Measurement points are given in Table 9. Measurement points are given in Table 9.
Fig 7. Propagation delay address input (An) to output Fig 8. Propagation delay enable input (En) to output
(Yn) and transition time output (Yn) (Yn) and transition time output (Yn)
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
W:
9,
QHJDWLYH
SXOVH 90 90
9
WI WU
WU WI
9,
SRVLWLYH
SXOVH 90 90
9
W:
9&& 9&&
9, 92 5/ 6
* '87 RSHQ
57 &/
DDG
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
$ < $ <
$ < $ <
$ $
$ $
DDE DDE
Fig 10. 1-of-16 decoder; LOW level output selected Fig 11. 1-of-16 demultiplexer; logic level on selected
outputs follow the logic level on the data input
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
62SODVWLFVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627
' ( $
;
F
\ +( Y 0 $
=
4
$ $
$ $
SLQLQGH[
ș
/S
/
GHWDLO;
H Z 0
ES
PP
VFDOH
',0(16,216LQFKGLPHQVLRQVDUHGHULYHGIURPWKHRULJLQDOPPGLPHQVLRQV
$
81,7 $ $ $ ES F ' ( H +( / /S 4 Y Z \ =
ș
PD[
PP
R
R
LQFKHV
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPLQFKPD[LPXPSHUVLGHDUHQRWLQFOXGHG
627 ( 06
6623SODVWLFVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627
' ( $
;
F
\ +( Y 0 $
=
4
$ $
$
$
SLQLQGH[
ș
/S
/
GHWDLO;
Z 0
H ES
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
$
81,7 $ $ $ ES F ' ( H +( / /S 4 Y Z \ = ș
PD[
PP
R
R
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
627 02
76623SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627
' ( $
;
F
\ +( Y 0 $
=
4
$ $
$
$
SLQLQGH[
ș
/S
/
GHWDLO;
Z 0
H ES
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
$
81,7 $ $ $ ES F ' ( H +( / /S 4 Y Z \ = ș
PD[
R
PP
R
1RWHV
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
3ODVWLFLQWHUOHDGSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
627 02
'+94)1SODVWLFGXDOLQOLQHFRPSDWLEOHWKHUPDOHQKDQFHGYHU\WKLQTXDGIODWSDFNDJH
QROHDGVWHUPLQDOVERG\[[PP 627
' % $
$
( $
F
GHWDLO;
WHUPLQDO
LQGH[DUHD
&
WHUPLQDO H
LQGH[DUHD Y 0 & $ % \ & \
H E
Z 0 &
/
(K H
'K ;
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
14. Abbreviations
Table 11. Abbreviations
Acronym Description
CMOS Complementary Metal Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
TTL Transistor-Transistor Logic
MM Machine Model
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
16.2 Definitions Suitability for use — Nexperia products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
Draft — The document is a draft version only. The content is still under
malfunction of a Nexperia product can reasonably be expected
internal review and subject to formal approval, which may result in
to result in personal injury, death or severe property or environmental
modifications or additions. Nexperia does not give any
damage. Nexperia and its suppliers accept no liability for
representations or warranties as to the accuracy or completeness of
inclusion and/or use of Nexperia products in such equipment or
information included herein and shall have no liability for the consequences of
applications and therefore such inclusion and/or use is at the customer’s own
use of such information.
risk.
Short data sheet — A short data sheet is an extract from a full data sheet
Applications — Applications that are described herein for any of these
with the same product type number(s) and title. A short data sheet is intended
products are for illustrative purposes only. Nexperia makes no
for quick reference only and should not be relied upon to contain detailed and
representation or warranty that such applications will be suitable for the
full information. For detailed and full information see the relevant full data
specified use without further testing or modification.
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the Customers are responsible for the design and operation of their applications
full data sheet shall prevail. and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or customer product
Product specification — The information and data provided in a Product design. It is customer’s sole responsibility to determine whether the Nexperia
data sheet shall define the specification of the product as agreed between product is suitable and fit for the customer’s applications and
Nexperia and its customer, unless Nexperia and products planned, as well as for the planned application and use of
customer have explicitly agreed otherwise in writing. In no event however, customer’s third party customer(s). Customers should provide appropriate
shall an agreement be valid in which the Nexperia product is design and operating safeguards to minimize the risks associated with their
deemed to offer functions and qualities beyond those described in the applications and products.
Product data sheet.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
16.3 Disclaimers customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
Limited warranty and liability — Information in this document is believed to
products in order to avoid a default of the applications and
be accurate and reliable. However, Nexperia does not give any
the products or of the application or use by customer’s third party
representations or warranties, expressed or implied, as to the accuracy or
customer(s). Nexperia does not accept any liability in this respect.
completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no Limiting values — Stress above one or more limiting values (as defined in
responsibility for the content in this document if provided by an information the Absolute Maximum Ratings System of IEC 60134) will cause permanent
source outside of Nexperia. damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
In no event shall Nexperia be liable for any indirect, incidental,
the Recommended operating conditions section (if present) or the
punitive, special or consequential damages (including - without limitation - lost
Characteristics sections of this document is not warranted. Constant or
profits, lost savings, business interruption, costs related to the removal or
repeated exposure to limiting values will permanently and irreversibly affect
replacement of any products or rework charges) whether or not such
the quality and reliability of the device.
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory. Terms and conditions of commercial sale — Nexperia
Notwithstanding any damages that customer might incur for any reason products are sold subject to the general terms and conditions of commercial
whatsoever, Nexperia's aggregate and cumulative liability towards sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
customer for the products described herein shall be limited in accordance agreed in a valid written individual agreement. In case an individual
with the Terms and conditions of commercial sale of Nexperia. agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
Right to make changes — Nexperia reserves the right to make applying the customer’s general terms and conditions with regard to the
changes to information published in this document, including without purchase of Nexperia products by customer.
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior No offer to sell or license — Nothing in this document may be interpreted or
to the publication hereof. construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
Export control — This document as well as the item(s) described herein Nexperia's specifications such use shall be solely at customer’s
may be subject to export control regulations. Export might require a prior own risk, and (c) customer fully indemnifies Nexperia for any
authorization from competent authorities. liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond Nexperia's
Non-automotive qualified products — Unless this data sheet expressly
standard warranty and Nexperia's product specifications.
states that this specific Nexperia product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested Translations — A non-English (translated) version of a document is for
in accordance with automotive testing or application requirements. Nexperia reference only. The English version shall prevail in case of any discrepancy
accepts no liability for inclusion and/or use of between the translated and English versions.
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer 16.4 Trademarks
(a) shall use the product without Nexperia's warranty of the
Notice: All referenced brands, product names, service names and trademarks
product for such automotive applications, use and specifications, and (b)
are the property of their respective owners.
whenever customer uses the product for automotive applications beyond
74HC_HCT154 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
18. Contents
1 General description . . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information . . . . . . . . . . . . . . . . . . . . . 1
4 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
5 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3
5.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Functional description . . . . . . . . . . . . . . . . . . . 4
7 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Recommended operating conditions. . . . . . . . 5
9 Static characteristics. . . . . . . . . . . . . . . . . . . . . 6
10 Dynamic characteristics . . . . . . . . . . . . . . . . . . 9
11 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
12 Application information. . . . . . . . . . . . . . . . . . 12
13 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 13
14 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 17
15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 17
16 Legal information. . . . . . . . . . . . . . . . . . . . . . . 18
16.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 18
16.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
16.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
16.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
17 Contact information. . . . . . . . . . . . . . . . . . . . . 19
18 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20