Scribd
Upload
111 views2 pages

Group Assignment 6 - Preliminary Plan

This document is a preliminary plan from Group 6 for their BFF 2433 Advanced Manufacturing Process group assignment. It outlines their investigation into the effect of spark gap, undersize, and feed rate during EDM die sinking on the surface roughness of stainless steel 304. It provides the title of their investigation, manufacturing process, brand of EDM machine, material, process parameters to be investigated, testing method, and includes figures of the stainless steel, EDM machine, and surface roughness tester.

Uploaded by

Fiqah Hamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
111 views2 pages

Group Assignment 6 - Preliminary Plan

This document is a preliminary plan from Group 6 for their BFF 2433 Advanced Manufacturing Process group assignment. It outlines their investigation into the effect of spark gap, undersize, and feed rate during EDM die sinking on the surface roughness of stainless steel 304. It provides the title of their investigation, manufacturing process, brand of EDM machine, material, process parameters to be investigated, testing method, and includes figures of the stainless steel, EDM machine, and surface roughness tester.

Uploaded by

Fiqah Hamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

BFF 2433 ADVANCED MANUFACTURING PROCESS

GROUP ASSIGNMENT: PRELIMINARY PLAN

LECTURER: DR NANANG FATCHUROHMAN


SECTION: 01
GROUP 6

NAME ID

NUR FARZIANA BT HUSEIN FA15005

SITI NUR AFIQAH BT ABD HAMED FA15006

SYAZWANI BT MOHAMAD FATAH FA15007

SRI NUR AREENA BT MOHD ZAINI FA15010

AQILAH BT KAMARUZAMAN FA15011

MUHAMMAD FAIZ BIN MOHD NASRI FA15017

NUR SYAHIDA FAZLEEN BINTI SUHAILI FA15052


Title: Investigation on The Effect of Spark Gap, Undersize and Feed Rate during EDM Die
Sinking on the Surface Roughness of Stainless Steel 304
Manufacturing process: EDM die sinking
Brand of machine: MITSUBISHI EA12D

Figure 1: MITSUBISHI EA12D


Material: Stainless Steel 304 (100x100x50)mm

Figure 2: Stainless Steel 304


Process parameter to be investigated: Spark Gap, Undersize and Feed Rate
Testing: Surface roughness using ASTM Standard No. ISO 97 ( SURFCOM 13OA )

Figure 3: SURFCOM 13OA

You might also like