Scribd
Upload
184 views3 pages

Siemens Multiscale Modelling of Textile Composite Using WISETEX

Key elements: • Covers micro (yarn-level) to meso (textile/UD-level) to macro (application-level) • CAD interface to geometry modeler WiseTex (KULeuven MTM) • fast homogenization method by TexComp (KULeuven MTM) for stiffness predictions • Advanced FE-based homogenization by ORAS (UGent MMS)

Uploaded by

RohitMadke
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
184 views3 pages

Siemens Multiscale Modelling of Textile Composite Using WISETEX

Key elements: • Covers micro (yarn-level) to meso (textile/UD-level) to macro (application-level) • CAD interface to geometry modeler WiseTex (KULeuven MTM) • fast homogenization method by TexComp (KULeuven MTM) for stiffness predictions • Advanced FE-based homogenization by ORAS (UGent MMS)

Uploaded by

RohitMadke
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Virtual Material Characterization (VMC) by multi-scale modeling

Generic framework in Siemens NX

Concept Prototype toolset in NX-Open

Multi-scale process workflow in collaboration with


KULeuven MTM and UGent MMS (Belgium)

Objective: generate mechanical material data by


simulation replacing tests (coupon-tests)

Key elements:
• Covers micro (yarn-level) to meso (textile/UD-level) to
macro (application-level)
• CAD interface to geometry modeler WiseTex
(KULeuven MTM)
• fast homogenization method by TexComp
(KULeuven MTM) for stiffness predictions
Restricted © Siemens AG 2016
• Advanced FE-based homogenization by ORAS (UGent
Delphine Carrella
Models Homogenization Material data
Siemens PLM Software
MMS)
Virtual Material Characterization (VMC) by multi-scale modeling
Workflow for meso-modeling

I. Composite geometry definition


Fast analytical homogenization II.

CAD Macro-level
properties

Stiffness

FE preprocessing
III. FE-based homogenization
FE solutions Mesh (phases, contacts, interfaces)
Homogenization

Material data
Macro-level properties (orientations,…)

Stiffness
Strength
Constraints (PBC,…)
Damage ORAS
Restricted © Siemens AG 2016 Delphine Carrella
Siemens PLM Software
Contact

László FARKAS, PhD


Senior Project Leader RTD
Simulation & Test Solutions
Product Lifecycle Management

Siemens Industry Software NV


Interleuvenlaan 68 3001 Leuven, Belgium
Phone: +32 16 38 4604
[email protected]

Restricted © Siemens AG 2016 Delphine Carrella


Siemens PLM Software

You might also like