KINNEY® KLRC

Two-Stage Liquid Ring Vacuum Pumps

Models: KLRC-200 KLRC-300

Features:
• Impellers positively locked to shaft
• Reliable mechanical seals for high-integrity sealing
and low shaft friction
• Center-anchored tie rods allow access to either end of
the pump without total disassembly
• Precision casting and CNC machining eliminates the
need for body gasketing (process dependent)
• Replaceable end plates
• Clearance adjustments via shims
• Made in the USA

KLRC - 200/300 Material & Seal Code Specifications KLRC-200 KLRC-300

X Material code
60 Hz 50 Hz 60 Hz 50 Hz
KLRC-200/300 XY
Y Mechanical seal code
18.5
Cast iron casings, SS316L Motor 15 HP 11 KW 25 HP
F KW
Material impellers & SS316 shaft
Code (X) All wetted parts SS316L & SS316
C 1750 1450 1750 1450
shaft
RPM RPM RPM RPM
John Crane Type 21
A
Carbon/Ceramic/Viton
Mechanical Flowserve Type RO Carbon/ Seal Water Flow 8 GPM 12 GPM
D
Seal Code (Y) Durchrome/Viton.
L PTFE encapsulated Viton O-Rings Noise Level 74 dBA @ 60 Torr (3 ft)

Consult factory for alternate seal configurations

Maximum Allowable
220oF (Hot Pump)
Suction Temperature

Typical Pumping Speed Curves

KLRC-200, KLRC-300 PERFORMANCE CURVES (60 Hz) KLRC-200, KLRC-300 PERFORMANCE CURVES (50 Hz)
400 400

350 600 350 600

300 KLRC-300 500 300 500

Flow (ACFM)
Flow (ACFM)

250
400
250 KLRC-300 400
200 m³/h
m³/h

200
300 300
150
150 KLRC-200
200 KLRC-200 200
100 100

50 100 50 100

0 0 0 0
10 100 1000 10 100 1000
Pressure (Torr) Pressure (Torr)
1.) Above performance data based on 68° F inlet air with 50% relative humidity and using water as a sealant at 60° F.
2.) All SS pump capacity less 10%
Dimensions: Dimensions are subject to change without notice.
Values shown are approximate and should not be used for construction.
Certified drawings are available through your local Tuthill Vacuum & Blower Systems Sales Professional

Bare Shaft Pump

PUMP ROTATION CLOCKWISE
Models: KLRC-200 & 300 FACING PUMP DRIVE SHAFT

A
Z
KINNEY
EE
KEY
SIZE

C
T
NPT FLUID INLET
U CONNECTION FOR
MECH. SEALS THIS
SIDE AND FAR SIDE
TYPICAL EACH END

F
D
AA
H

B
DISCHARGE

GG
NPT
ATTENUATION
VALVE

N G
K
F/F
P ANSI
FLANGE
X

E S
NPT SEALANT J SUCTION
FLUID INLET
BB CONNECTION

in A B C D E F G H J K N
mm
29 11/16 16 7/8 19 1/8 15 9 1/4 8 13/16 12 3/8 9 1/16 10 3/16 15 1/4
KLRC-200 2” ANSI
754 428 486 381 235 224 314 230 259 387
33 9/16 16 7/8 19 1/8 19 9 1/4 8 13/16 16 5/16 9 1/16 10 3/16 15 1/4
KLRC-300 2” ANSI
853 428 486 483 235 224 414 230 259 387

APPROX
in P S T U X Z AA BB EE GG WEIGHT
mm LBS / kg
8 1/4 3 3/8” 3 16 15/16 11 3/4
KLRC-200 1” NPT 1/4” NPT 1 1/4” 1/4 1/4” NPT 360 / 163
210 86 76 430 299
×
8 1/4 3 3/8” 3 20 7/8 11 3/4 1/4
KLRC-300 1” NPT 1/4” NPT 1 1/4” 1/2” NPT 405 / 184
210 86 76 530 299
Dimensions: Dimensions are subject to change without notice.
Values shown are approximate and should not be used for construction.
Certified drawings are available through your local Tuthill Vacuum & Blower Systems Sales Professional

NSR (No Sealant Recovery) & PSR (Partial Sealant Recovery) System
Models: KLRC-200 & 300

D
F OVERFLOW
CONN
H

L
M
N
P

V W

R
INLET

APPROX.
in
A C D F H L M N P R U V W WEIGHT
mm
LBS / kg

2” 29 3/8 1 1/2” 76 7/16 3/4” 66 7/8 58 56 31 2” F/F 6 13/16 15 12 840

KLRC-200
NPT 746 NPT 1942 NPT 1699 1473 1422 787 Flange 173 381 305 381

2” 29 3/8 1 1/2” 81 3/4” 70 13/16 58 56 31 2” F/F 7 5/16 15 12 920

KLRC-300
NPT 746 NPT 2057 NPT 1799 1473 1422 787 Flange 186 381 305 417
 Dimensions: Dimensions are subject to change without notice.
Values shown are approximate and should not be used for construction.
Certified drawings are available through your local Tuthill Vacuum & Blower Systems Sales Professional

FSR (Full Sealant Recovery) System

Models: KLRC-200 & 300
A
K DISCHARGE
CONNECTIONS CONNECTION
FOR OPTIONAL
HIGH AND LOW
LEVEL SWITCHES
B
SEALANT
MAKE-UP
CONNECTION

C
D

G E
H DRAIN CONN. (PLUGGED)

L
Q M
N
S P

W
X W
Y
Z

R
INLET

APPROX.
in
A B C E F K L M N P R T W WEIGHT
mm
LBS / kg
2” 3/4” 29 3/8 3/4” 76 (2) 2” 66 7/8 58 56 31 2” F/F 18 1/8 12 1220
KLRC-200
NPT NPT 746 NPT 1930 NPT 1698 1473 1422 787 FLANGE 460 305 553

2” 3/4” 29 3/8 3/4” 80 (2) 2” 70 13/16 58 56 31 2” F/F 19 5/8 12 1252

KLRC-300
NPT NPT 746 NPT 2032 NPT 1799 1473 1422 787 FLANGE 498 305 568

Your Local Tuthill Vacuum & Blower Systems Sales Professional:

T
REGIS ERED

Tuthill Vacuum & Blower Systems VACUUM & BLOWER SYSTEMS

4840 West Kearney Street TUTHILL CORPORATION

Springfield, Missouri USA 65803-8702

D
IN

AR

ER D
T

NA N

o 417.865.8715 800.825.6937 f 417.865.2950

TIO TA
N A L Q U A LIT Y S

tuthillvacuumblower.com
TH-020 01/14