Scribd
Upload
23 views2 pages

CHAVETERO

This document contains calculations to determine: 1) The required strength (Sat) of steel for a shaft, which is determined to be 24,284 psi or greater using given parameters and equations. 2) The dimensions of a cube part, with a diameter of 35mm and length of 52.5mm. 3) The force and shear stress acting on a keyway, and the required keyway length is calculated to be 1.61 inches. 4) The final length of a wheel is calculated to be 2.687 inches based on the cube length and keyway length.

Uploaded by

RolyBernal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
23 views2 pages

CHAVETERO

This document contains calculations to determine: 1) The required strength (Sat) of steel for a shaft, which is determined to be 24,284 psi or greater using given parameters and equations. 2) The dimensions of a cube part, with a diameter of 35mm and length of 52.5mm. 3) The force and shear stress acting on a keyway, and the required keyway length is calculated to be 1.61 inches. 4) The final length of a wheel is calculated to be 2.687 inches based on the cube length and keyway length.

Uploaded by

RolyBernal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

𝑆𝑡 ∗ 𝑘𝑅 ∗ (𝑆𝐹)

𝑆𝑎𝑡 =
𝑌𝑁

𝑘𝑅 = 𝑓𝑎𝑐𝑡𝑜𝑟 𝑑𝑒 𝑐𝑜𝑛𝑓𝑖𝑎𝑏𝑖𝑙𝑖𝑑𝑎𝑑 0.99 = 1

𝑆𝐹 = 1

𝑌𝑁 =

𝑁𝑖 = 60 ∗ 𝐿 ∗ 𝑛 ∗ 𝑞

𝑁𝑖 = 60 ∗ 20000 ∗ 21 ∗ 1

𝑁𝑖 = 2.52 ∗ 10𝐸 − 7

𝑌𝑁 = 1.7

41282.78 ∗ 1 ∗ 1
𝑆𝑎𝑡 ≥
1.7
𝑆𝑎𝑡 ≥ 24283.98 𝑝𝑠𝑖

≥ 𝐻𝐵 = 148

𝐴𝑐𝑒𝑟𝑜 4130 𝑅𝐸𝐶𝑂𝐶𝐼𝐷𝑂 𝐻𝐵156

𝑆𝑎𝑡 = 77.3𝐻𝐵 + 12800

𝑆𝑎𝑡 = 77.3(156) + 12800

𝑆𝑎𝑡 = 24858.8 𝑝𝑠𝑖 ≥ 24283.98 𝑝𝑠𝑖

𝑐𝑢𝑚𝑝𝑙𝑒

CALCULO DEL CUBO PARA CATARINA

𝐷𝑖á𝑚𝑒𝑡𝑟𝑜 𝑑𝑒𝑙 𝑒𝑗𝑒 = 𝐷 = 35𝑚𝑚

𝐷𝑒 = 2𝐷 = 2(35𝑚𝑚) = 70𝑚𝑚

𝐿 = 1.5𝐷 = 1.5(35𝑚𝑚) = 52.5𝑚𝑚

CALCULO CHAVETERO DE CATARINA

Fuerza que actúa:

𝑇 8331.6 𝑙𝑏 ∗ 𝑖𝑛
𝐹= =
𝐷 1.38
2 2
𝐹 = 12074.78 𝑙𝑏

Esfuerzo cortante
2𝑇
𝛤=
𝐷𝑊𝐿
3 3 3
𝑐𝑜𝑛 1 = 𝑊 = 𝐻=
8 8 8

0.5(𝑆𝑦 ) 0.5(60000 𝑝𝑠𝑖)


𝛤𝑑 = =
𝑁 3
𝛤𝑑 = 10000 𝑝𝑠𝑖

Longitud de la chaveta

2𝑇 2(8331.6 𝑙𝑏 ∗ 𝑖𝑛)
𝐿= =
𝛤𝑑 𝐷𝑊 10000 𝑙𝑏 ∗ 1.38 𝑖𝑛 ∗ 3/8𝑖𝑛
𝑖𝑛2
16663.2
𝐿= = 1.61 𝑖𝑛 𝑐ℎ𝑎𝑣𝑒𝑡𝑎
10352
𝐿𝑅𝑈𝐸𝐷𝐴 = 𝐹 + 𝐿𝐶𝑈𝐵𝑂

𝐿𝑅𝑈𝐸𝐷𝐴 = 15.75𝑚𝑚 + 52.5𝑚𝑚

𝐿𝑅𝑈𝐸𝐷𝐴 = 68.25𝑚𝑚 = 2.687 𝑖𝑛

Longitud final

3 3
∗ ∗ 2.687
8 8

You might also like