Rototiller X Series Brochure
Rototiller X Series Brochure
Rototiller X Series Brochure
Mounting Notes
The base price of ERI FM antennas include brackets for
mounting on a tower leg or pole, up to 15-inches in diameter,
or for face mounting on a uniform cross section tower section
up to 42-inch face. Optional, standard fiberglass and steel
anti-rotation brackets are available for uniform cross section
tower faces up to 42-inches, center to center. For uniform
tower faces greater than 42-inches steel anti-rotation brackets
are generally used. Fiberglass anti-rotation brackets for face
sizes larger than 42-inches may be available as a special order
item. Please contact ERI with those requirements. Standard
FM antenna mounting brackets and anti-rotation brackets
assume that the tower face is unobstructed. If conduits,
transmission lines, or other appurtenances are mounted on
the tower face(s) they could interfere with standard bracket
designs and may require an optional, extra cost, brackets to
accommodate the obstruction. Contact ERI with details for
further information. Brackets for mounting on tapered tower
legs are available at additional cost. Contact ERI with tower
details. Anti-rotation brackets (one per bay) required for leg
mounting if leg O.D. is:
• LPX, LP, 300, and 350 Series Antennas - 2-inches (51 mm)
leg size or less
• SHPX, SHP, SHP-H, MPX, and MP Series Antennas - 3-inches
(76 mm) leg size or less
• Radomed Antennas - 5-inches (127 mm) leg size or less
Ordering Information
Type Number Definition Options*
a-bcde-f-g-h • Anti-rotation brackets
a Model: SHPX, LPX, MPX • Quarter wave stub - Included with SHPX, MPX, and LPX
b Number of Bays antennas
c Interbay Line Size: A = 3 1/8 inch, B = 4 1/8 inch, C = 6 1/8 inch • Beam tilt (center fed antennas only)
d Input Feed Configuration: E = End Fed, C = Center fed for even number • First null fill (center fed antennas only)
of bays, off center fed for odd number of bays
• Second null fill (center fed antennas only); Second null
e RF Input Size: Blank = 3 1/8 inch, 6 = 6 1/8 inch
fill not available for LPX antennas
f Design Note 1: Blank = Omnidirectional, DA = Directional Azimuth
Pattern • Beam tilt and first null fill (center fed antennas only)
g Design Note 2: Blank = Full wave length bay to bay spacing, HW = • Radomes
Half wave length bay to bay spacing • Deicers (600w/220v)
h Design Note 3: Blank = Standard product, SP = Special Design
• Stem heaters (300w/220v)
Example: SHPX-4AC-DA-HW
• Export packing
Description: ERI Model SHPX ROTOTILLER FM Antenna, four bay, 4 1/8 inch interbay *
Options available at additional cost.
line, center fed, directional azimuth pattern, half wave length bay to
bay spacing.