Scribd Logo
Upload

Welcome to Scribd!

  • 349 views

    Ccna 3 Cheatsheet

    Uploaded by

    Luciana Neagu
    The document discusses several network protocols and configurations: - VTP is configured to propagate VLANs from a server to clients, including setting the VTP domain and version on the server and setting clients to mode client. - STP modes like PVST and RPVST are configured and priorities can be set manually or automatically. Interface settings like cost, portfast, and BPDU guard are also covered. - LACP and PAgP are protocols for aggregating links into port-channels or trunks and the configuration examples show setting modes to active/passive for LACP and desirable/auto for PAgP on interfaces. - HSRP and GLBP provide high availability gate

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Ccna 3 Cheatsheet

    Uploaded by

    Luciana Neagu
    349 views3 pages
    The document discusses several network protocols and configurations: - VTP is configured to propagate VLANs from a server to clients, including setting the VTP domain and version on the server and setting clients to mode client. - STP modes like PVST and RPVST are configured and priorities can be set manually or automatically. Interface settings like cost, portfast, and BPDU guard are also covered. - LACP and PAgP are protocols for aggregating links into port-channels or trunks and the configuration examples show setting modes to active/passive for LACP and desirable/auto for PAgP on interfaces. - HSRP and GLBP provide high availability gate

    Original Description:

    ccna-3-cheatsheet

    Original Title

    ccna-3-cheatsheet

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses several network protocols and configurations: - VTP is configured to propagate VLANs from a server to clients, including setting the VTP domain and version on the server and setting clients to mode client. - STP modes like PVST and RPVST are configured and priorities can be set manually or automatically. Interface settings like cost, portfast, and BPDU guard are also covered. - LACP and PAgP are protocols for aggregating links into port-channels or trunks and the configuration examples show setting modes to active/passive for LACP and desirable/auto for PAgP on interfaces. - HSRP and GLBP provide high availability gate

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    349 views3 pages

    Ccna 3 Cheatsheet

    Uploaded by

    Luciana Neagu
    The document discusses several network protocols and configurations: - VTP is configured to propagate VLANs from a server to clients, including setting the VTP domain and version on the server and setting clients to mode client. - STP modes like PVST and RPVST are configured and priorities can be set manually or automatically. Interface settings like cost, portfast, and BPDU guard are also covered. - LACP and PAgP are protocols for aggregating links into port-channels or trunks and the configuration examples show setting modes to active/passive for LACP and desirable/auto for PAgP on interfaces. - HSRP and GLBP provide high availability gate

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 3

    VTP

    SERVER:
    //setez astea pe server

    ServerSW(config)# vtp domain <nume> (cisco)


    ServerSW(config)# vtp version <numar> (1)
    ServerSW# show vtp status

    ServerSW(config)# vlan 10
    ServerSW(vlan-config)# name Research

    CLIENT:
    //setez clientii care iau vlanurile de la server
    ClientSW(config)# vtp mode client

    STP
    Sw(config)# spanning-tree mode pvst | rapid-pvst

    //setare prioritate manual


    Sw(config)# spanning-tree vlan <vlan-id> priority <priority>
    //setare prioritate automat
    Sw(config)# spanning-tree vlan <vlan-id> root primary/secondary

    Configurări pe interfaţă
    // Modificare cost
    Sw(config-if)# spanning-tree cost <cost>
    // Activare portfast
    Sw(config-if)# spanning-tree portfast
    // Activare BPDU-guard
    Sw(config)# spanning-tree bpduguard enable
    LACP
    SW1(config)# interface FastEthernet0/15
    SW1(config-if)# switchport trunk encapsulation isl
    SW1(config-if)# switchport mode trunk
    SW1(config-if)# channel-group 1 mode active/PASSIVE
    SW1(config-if)# interface FastEthernet0/16
    SW1(config-if)# switchport trunk encapsulation isl
    SW1(config-if)# switchport mode trunk
    SW1(config-if)# channel-group 1 mode active/PASSIVE
    !!! O conexiune nu poate avea modul activ la ambele capete!
    !!! Daca configuram modul activ la un capat => modul pasiv la celalalt capat.

    SW1# show etherchannel summary -> Cautam “(P)”

    PAgP
    SW1(config)# interface FastEthernet0/13
    SW1(config-if)# switchport trunk encapsulation dot1q
    SW1(config-if)# switchport mode trunk
    SW1(config-if)# channel-group 1 mode desirable/auto
    SW1(config-if)# interface FastEthernet0/14
    SW1(config-if)# switchport trunk encapsulation dot1q
    SW1(config-if)# switchport mode trunk
    SW1(config-if)# channel-group 1 mode desirable/auto

    Depanare:
    show interfaces port-channel
    show etherchannel summary
    show etherchannel port-channel
    show interfaces etherchannel

    HSRP
    Active(config)# interface fa 0/0
    Active(config-if)# ip address 10.10.1.11 255.255.255.0
    Active(config-if)# standby 1 ip 10.10.1.1
    Active(config-if)# standby 1 priority 120

    Standby(config)# interface fa 0/0


    Standby(config-if)# ip address 10.10.1.12 255.255.255.0
    Standby(config-if)# standby 1 priority 100
    Standby(config-if)# standby 1 ip 10.10.1.1

    Active# show standby brief

    !!! Modificând prioritatea implicită putem să forțăm echipamentul activ.


    GLBP
    R1(config)# interface fa 0/0
    R1(config-if)# ip address 10.10.1.11 255.255.255.0
    R1(config-if)# glbp 1 ip 10.10.1.1
    R1(config-if)# glbp 1 priority 120

    R2(config)# interface fa 0/0


    R2(config-if)# ip address 10.10.1.12 255.255.255.0
    R2(config-if)# glbp 1 priority 100
    R2(config-if)# glbp 1 ip 10.10.1.1

    Active# show standby brief

    EIGRP
    R1(config)# router eigrp 1
    R1(config-router)# no auto-summary
    R1(config-router)# eigrp router-id 1.1.1.1
    R1(config-router)# network 10.0.0.0 0.0.0.3
    R1(config-router)# network 10.0.0.4 0.0.0.3
    R1(config-router)# passive-interface fa0/0

    show ip eigrp neighbors

    You might also like