Exercise: Download and Install Arcgis Pro
Exercise: Download and Install Arcgis Pro
MOOC
Exercise
Download and Install ArcGIS Pro
Section 1 Exercise 1
04/2018
Cartography. MOOC
Instructions
Use this guide to download and install ArcGIS Pro.
Time to complete
Approximately 10-15 minutes.
Software requirements
ArcGIS Pro 2.1
Introduction
As part of the Cartography. MOOC, you are given access to ArcGIS Pro for the duration of the
course to use for completing course exercises. This exercise provides information on
downloading, installing, and setting up the limited-use version of ArcGIS Pro 2.1.
If you are signed in to the Cartography. course, you can access your profile information by
clicking My Schedule at the top of the page.
This document is an editable PDF, which means that you can type your credentials into the
fillable fields below.
Note: If you are using a Windows computer, you can type directly into the fields. If you are
using a Mac computer, you will need to right-click the PDF displayed in the browser, select
Open With Preview from the pop-up menu, and then complete the fillable fields. Fillable
fields are not supported in Microsoft Edge.
a In the fields in the box below, please note your Esri credentials for reference.
Keep this table for reference, as you will need this information in the next exercise and
throughout the course. You can do one or more of the following to save this important
information:
• Save the document on your computer in a location you will remember. We suggest
the filename EsriCredentials_Apr2018.pdf. For Mac users, save the file in Preview.
• Print this page with the table with your credentials and keep it in a safe place.
• Take a picture of the table above with your phone.
Note: You can click the name of the section below that applies to go directly to it.
• If you already have ArcGIS Pro installed and need to verify which version you are
using
• If you need to download and install ArcGIS Pro for the first time
• If you cannot install ArcGIS Pro 2.1 because of system requirements or other reasons
If you already have ArcGIS Pro installed and need to verify which version
you are using
If you already have ArcGIS Pro installed on your computer, you will need to ensure that you
are using ArcGIS Pro 2.1. To verify which version you have, perform the following steps:
The first line under Product Information tells you which version that you have. If you have
ArcGIS Pro 2.1, make sure that the box next to Check For Updates On Startup is
unchecked. Next, you will need to determine if you will use your existing license or the
one provided for this course. Go to Step 3.
Note: If you have ArcGIS Pro 2.1.1 or ArcGIS Pro 2.1.2, those versions will work for this
course. There is no need to roll back to ArcGIS Pro 2.1.
Note: You can also access this information when ArcGIS Pro is running by clicking the blue
Project tab on the ribbon. Then, in the blue backstage panel, click the About tab.
If you do not have ArcGIS Pro 2.1 installed, you will need to download and install it. You
will most likely want to uninstall an older version of ArcGIS Pro before installing the current
one. Review the changes and compatibilities (https://bit.ly/2nFtbMJ) and then proceed to
the "If you need to download and install ArcGIS Pro for the first time" section of this
document.
3. Click the Licensing tab.
The text under the heading Licensing identifies the type of license (https://bit.ly/2H6qytJ)
that you have: Single Use, Concurrent Use, or Named User.The table below the license
type identifies the level of software (https://bit.ly/2vvqv9N) you have: Basic, Standard, or
Advanced.
Depending on what level of software you have and your experience with Esri softare, you
can choose to use your existing license and ArcGIS credentials or the ones provided by
Esri for this course.
If you need to download and install ArcGIS Pro for the first time
If you do not already have ArcGIS Pro installed, you will need to download and install it.
1. Open a new tab in the browser where you are accessing the course and go to
https://my.esri.com/.
2. On the My Profile tab, in the Primary Email field, note your email address.
Note: This is the email address that you used to register for this course. We used it to
create a username for you, which you will need later. Please make a note of this email
address. Please do not change your email address, even if it is outdated, incorrect, or fake,
until you have completed the first two exercises.
If you registered for the course at least two business days ago, in the Connected
Organizations field, you should see that you are connected to an organization called
MOOC Program. Some students will be connected to more than one organization. If you
are connected, continue with the next step. If you are not yet connected to that
organization, please wait one business day before you try to continue.
3. At the top of the page, click the My Organizations tab. You should see the MOOC
Program organization. If you see more than one organization, select the MOOC Program
organization.
The My Organizations tab contains three choices: Overview, Licensing, and Downloads.
Note: If you do not see the Downloads link, try these solutions:
• At the top of the page, confirm you are looking at the My Organizations tab.
• At the top right of the page, click your name and choose Sign Out to sign out of
my.esri.com. Then sign in again.
• Try accessing https://my.esri.com/ with a different browser.
• Contact us via the Help tab on the black navigation bar in the course.
4. Below the My Organizations tab, click Downloads and note the first choice, ArcGIS Pro.
5. Confirm that ArcGIS Pro 2.1 is selected, and then click View Downloads.
6. Scroll down and click Download for the install file (approximately 995MB).
7. When the download is complete, find the downloaded .exe file on your computer and
double-click it to install ArcGIS Pro.
8. Follow the prompts on the screen. Pause when you are prompted to sign in. At that
point, you are ready for Section 1 Exercise 2 - Getting Started with ArcGIS Online. In that
exercise, you will learn the username and password (credentials) needed to sign in.
IMPORTANT! As part of the ArcGIS Pro install process, you will be prompted to sign in to
ArcGIS Pro. To do so, you will need your ArcGIS credentials. These are not the same as
your Esri credentials! You will learn about your ArcGIS credentials in Section 1 Exercise 2 -
Getting Started with ArcGIS Online.
Note: No other downloads are required for this course. Please note that you will not be
provided a license for any other software. The one exception is for language packs. If you
want to run ArcGIS Pro in a supported language, you may download those files and follow the
instructions to install them. The course is taught in English, and all exercises have English
screenshots and refer to ArcGIS Pro commands in the English interface.
Conclusion
When you have the correct version of ArcGIS Pro installed, you are ready to move on to the
next exercise in this section. There, you will learn about your course-provided ArcGIS
credentials and the ArcGIS Pro software license that they include.