University Work Plan Template
University Work Plan Template
for
[PROJECT TITLE]
[Project Number]
Submitted by
[Investigator Name(s)]
[Title(s)]
[Institution or Firm]
[Address]
for
[Month Year]
1.2 Principal Investigator (ODOT requests only one per institution or firm)
[Name, Title]
[Department]
[Institution or Firm]
[Address]
[City, State ZIP] Phone: [number]
[Name, Title]
[Department]ODOT Research Coordinator
[Institution or Firm]
[Names, Affiliations]
0
2.0 Problem Statement
This is a description of the specific problem that is the basis for the research. The problem
statement should include identification of what the problem is, who is affected, and how they
are affected.
The background on the nature of the problem is described here, including other
efforts to address the problem, the gaps in knowledge that remain, and the
significance of this work in the larger field of knowledge. Describe the findings of
literature searches or information currently known. Then indicate why the proposed
work is significant as compared to other related research efforts.
The specific objectives of the project, which will address the problem, are stated here. Make
sure the objectives are clearly stated, measurable, reasonable and feasible. In the Research
tasks below (Section 5.0), indicate what will be measured and in what way the measurement
will be accomplished.
3.1 Benefits
With the accomplishment of the objectives, what will the specific benefits of this
project be to ODOT and transportation in general?
4.0 Implementation
A more specific statement is made here on how the findings of the research will be
disseminated, who will use them, and how they will be used. Implementation includes
activities designed to make the research results more accessible such as presentations, a paper
or other summary document, videotape, Research Note, Inside ODOT article, internet
presentation, etc. The project work plan should include an implementation plan with
sufficient detail to indicate the following:
How the findings of the research will be disseminated (e.g. written reports, journal
articles, conference sessions, presentations, news releases, etc. for various audiences);
and
Any specific follow-on efforts to be undertaken to enhance the usability of the research
findings (e.g., manuals, guides, workshops, video, etc.).
1
5.0 Research Tasks
Each of the specific tasks to be performed in the research project are described here. The
descriptions should be concise but provide a level of detail to show the current thinking of the
research team.
Examples of information that should be described in the Tasks include the following:
experiment design, types and number of specimens, tests and measurements, sampling
methodology, data analysis methods, modeling approach, and significant or unique hardware
and software development If the project is designed to be completed in phases, the
organization of this section should reflect this, with the specific tasks listed under a heading
for each phase.
Each major task should have a deliverable product, which will serve as evidence of
completion of the task. In some cases, a progress report may be an acceptable interim
deliverable. In other cases, a specific work product, research report or journal article may be
the deliverable. It is desirable to specify an interim deliverable no less frequently than about
once per quarter (three-month period). Each task is numbered and includes the following
sub-headings:
2
ODOT Action or Decision: Review TAC advice, discuss with PI, and if necessary direct
PI to make changes to project documents.
3
Time Frame: [6-9 Months after NTP]
Responsible Party: PI, ODOT Research Coordinator, TAC
Cost: [Estimated cost associated with the accomplishment of the task]
Deliverable: TAC meeting attendance, TAC meeting presentation, TAC Meeting
Minutes, meeting agenda
TAC Action: TAC review of Draft Research Methodology and Draft Literature Review.
Advise ODOT Research Coordinator regarding any critical issues with the project’s
research design. If possible reach consensus regarding the content and methods contained
in the draft research design. Advise ODOT Research Coordinator regarding project next
steps.
ODOT Action or Decision: Review TAC advice. Assess project potential for successful
completion. If necessary direct PI to make changes to project documents. Provide formal
acceptance of Draft Research Methodology. Authorize PI to proceed with subsequent
steps, notify by memo or email.
4
Task 7: Draft Final Report
Publication ready Draft Final Report in the prescribed ODOT report format. (Formatting
includes correct fonts, spacing, citations and graphics) Contents include: an updated
abstract, acknowledgement, disclaimer, introduction, Updated Lit Review (Task 2), Final
Research Methodology (Task 3), Draft Analysis Report Section (Task 6), discussion of
results, conclusions, and potential for future research, application, or technology transfer,
and other sections as appropriate.
Time Frame: [3-6 Months after Data Collection]
Responsible Party: PI
Cost: [Estimated cost associated with the accomplishment of the task]
Deliverable: Draft Final Report using ODOT’s report template
TAC Action: TAC review and feedback to the ODOT Research Coordinator
ODOT Action or Decision: Review and counsel prior to TAC meeting
5
ODOT Action or Decision: Review. Provide formal acceptance of Final Report. Publish
Final Report on ODOT’s research website
Optional Tasks:
Any other project tasks
Purchase of capital equipment (Typically after acceptance of Draft Research
Methodology)
Community/stakeholder outreach
Additional TAC meetings
Appendix: Draft Agency Documentation (e.g. Policy, Procedures, Specifications,
or other implementation documents)
5.2 Reporting
All reports shall be produced in the standard ODOT Research Section report format
provided to the Project Investigator by the Research Coordinator unless some other
format is deemed to be more appropriate. The Project Investigator shall be
responsible for submitting deliverables as professional-level written composition
equivalent to the writing standards of peer-reviewed journals. These writing
considerations include grammar, spelling, syntax, organization, and conciseness.
The Project Investigator, in consultation with the TAC and Research Coordinator,
shall deliver to ODOT in electronic format the data produced during the project. The
Project Investigator shall ensure the data is labeled and organized to facilitate future
access. ODOT shall warehouse the data.
Prior to accessing ODOT right-of-way (ROW), all personnel who will work on
ODOT ROW shall complete safety training appropriate to the work to be performed
within the ROW. The Project Investigator shall notify Project Coordinator in writing
(email accepted) prior to the first day of work within the ROW that all project
personnel who will access ODOT ROW have been trained. Until all ROW work is
6
completed, the Project Investigator shall notify Project Coordinator in writing (email
accepted) annually that an active safety training appropriate to the work to be
performed within the ROW has been completed by all personnel who will work on
ODOT ROW.
This section specifies the time line for the project, listing the task headings and showing
monthly and/or quarterly time blocks in which each task will be accomplished. Also shown
are interim and final deliverables. (A sample matrix is shown below.)
Generally we schedule 3 months between draft report submittal and report submittal for
publication.
An itemized budget for the project is included here showing expenditures for each task by
fiscal year and in total.
Support/management (ODOT
completes)
Total for ODOT (ODOT
completes)