Wdrive Boosters

WDRIVE
Frequency Converted
Booster Sets
CONSTRUCTION Membrane Tank;

• The pumps are installed on a single base and connected to each oter - Variable speed booster sets needed smaller tanks compared to
by means of suction and delivery pipes. traditional systems. Gerenally speaking, a tank with a liter capacity of
• It is easy to program, designed for maximum energy efficiency. just 10% of the nominal capacity of a single pump, expressed in liters
• Motor starting via variable frequency operation. per minute, is needed.
• Wdrive series can be fitted with XHC, XVM, MV, WTX, WTM series. Possibility to display;
Pressure boosting sets with automatic operation and constant pressure, - Pressure of the system
consisting of variable speed pump (s) driven by WDRIVE frequency - Working frequency
converter, with isolation and non-return valves, pressure gauge, analog - Absorbed current
sensors, and start/stop control kit in multi-pump versions. - Alarms
Possibility to arrange and set;
DESIGNATION - Constant flow
WDRIVE 3 / XVM 10-8 - 2nd work point
- Dry operation protection
Pump Model - External communication port (RS 485)
Number of pumps in the unit - Stop time
Variable Speed Regulation with - Auxiliary relay configuration
WDRIVE device
APPLICATIONS
SPECIFICATION - Water supply
• Delivery : up to 540 m3/h - Sprinkling
• Head : up to 160 m - Irrigation and spraying
• Power : up to 15 kW - Pumping water from wells and out of low-lying tanks.
• Max. operating pressure :16 Bar - Domestic water pressure boosting
• Environment Temperature : -10°C ... +40°C - High rise buildings, hotels, apartment, buildings, offices, schools, sport
• Altitude : Lower than 1000 m facilities etc.
- Industrial and manufacturing applications.
OPERATION
Pumps are directly driven by WDRIVE frequency converters. According BENEFITS
to the water consumption, the pumps at variable speed ensures the - Reliable
required water quantity at the set pressure. Pumps start in a cascade - Highly efficient
sequence, with changeover of pump starting sequence. WDRIVE - Service-friendly
frequency converter for regulating three-phase motors for operation at - Space saving
constant pressure. Attached directly to the motor connection box. Air - Easy to install
cooled. Options for operation in pump groups of up to 5 units controlled - Variable speed motors with consequently reduced noise
from a single WDRIVE or in communication with 3 WDRIVE. - Reduced water hammer
Only two parameters to set at starting; - Low cost
- Maximum motor current - Constant output pressure
- Working pressure - Plug & Run Design
1049
WDRIVE
Frequency Converted Booster Sets
WDRIVE Specifications
Design - Multi-pump Control: can realize 1 master and 5 slaves combine work at
most.
WDRIVE device controller is specially designed for HVAC applications and - Constant differential pressure control: PID control based on the feedback
water circulation to realize constant pressure differential control, constant source of AI1-AI2.
temperature differential control and constant pressure and constant - Alternate running balance every pump’s running time and so prolongs
temperature controls. service life of the pump.
- Different fault alarms functions: high pressure, low pressure, low level,
It can confirm the system to adapt to the change of a HVAC circuit load transducer error, etc. and as 22 kinds of protection functions like over
with the advantage of rapid reaction, little influencing on temperature and current, over voltage low voltage, phase failure, over load, etc.
humidity, ensuring the balance of the system, efficient energy saving. - Sleep Function: Sleep down when have no water consumption, to earn
a better energy saving
Input Power Range - Freeze-proofing function: Suitable to low temperature are prevent
pump from freezing
• Single phase 220 V: 0,75~2,2 kw - Two running mode: Synchronous control mode and master-slave
• Three phase 220 V: 3,7~7,5 kw control mode.
• Three phase 380 V: 0,75~15 kw
WDRIVE controller is equipped with an easy to use LCD display and is
Output Power Range completely designed and built for controlling pump systems.
• Single phase 0~220 V: 0,75~2,2 kw IP54 protection class is standard and Mounting Bracket included.
• Three phase 0~220: 3,7~7,5 kw
• Three phase 0~380 V: 0,75~15 kw Stop running automatically when no water consumption and alarm
automatically when faults occur.
Characteristics
• Constant water pressure
• Constant pressure differential
• Constant temperature differential
• Constant temperature
- Optimizes pump performance

- Soft start, low motor, start current
- Relay output: 2 outputs XHC XVM
- Running automatically when power on
- Programmable analogue input:
• AI1: 0~10V or 0~20 mA
• AI2: 0~10V or 0~20 mA
MV WTM
WTX
1050
WDRIVE
Booster Set with XHC Series
Fuse Box
Rubber Cable
Float Switch Glycerin Filled
Manometer
Frequency
Converter 5 Way Connection
Base Plate
Converter Main Pump

Cooling Fan
Not: Non return valve for

suction side is included
Automatic Water Boosters Frequency Converted Pump Units

(1 Main Pump Application)
1051
WDRIVE
Booster Set with XHC Series
Fuse Box
Rubber Cable
Float Switch
Glycerin Filled
Manometer
Frequency
Converter
Stainless Steel
Discharge and
Suction Manifold
Ball Valve with

Built -in Check Valve
Base Plate
Analog Sensor
Main Pump
(Fully AISI 304)
Ball Valve

(1 Main Pump + 1 Stand By Application)
1052
WDRIVE
Booster Set with XVM Series
Standart Type
Electric Motor
Frequency
Converter
Fuse Box
Main Pump
(Fully AISI 304)
Analog Sensor
Base Plate
5 Way Connection
Glycerin Filled
Manometer
Not: Non return valve for
suction side and rubber cable
float switch are included

(1 Main Pump Application)
1053
WDRIVE
Booster Set with XVM Series
Standart Type
Electric Motor
Frequency
Converter
Main Pump Fuse Box

(Fully AISI 304)
Rubber Cable
Ball Valve Float Switch
Ball Valve with

Built -in Check Valve
Analog Sensor
Stainless Steel
Discharge and
Suction Manifold Glycerin Filled
Manometer
Base Plate
Automatic Water Boosters with Frequency Converted Pump Units

(1 Main Pump + 1 Stand By Application)
1054
XHC
Horizontal, Multi-Staged Stainless Steel Pumps
XHC 2
Head: H(m) Q-H (m3/h-m)

70
65
2-7
60
55
2-6
50
45 2-5
40
2-4
35
30
2-3
25
20 2-2
15
10
0
0 0,4 0,8 1,2 1,6 2,0 2,4 2,8 3,2 3,6 4,0 4,4 Q (m3/h)
NPSH NPSH Eta
ft m %
6 60
18
Eta
12 4 40
6 2 20
NPSH
0 0 0
0 0,4 0,8 1,2 1,6 2,0 2,4 2,8 3,2 3,6 4,0 4,4 Q (m3/h)
1 PH 3 PH
P2 l/min 13 20 26 33 40 46 53 60 66
Type 230 V 400 V
Q m3/h
kW HP A A 0,8 1,2 1,6 2 2,4 2,8 3,2 3,6 4
XHC 2-2 0,25 0,3 2 0,7 19,5 19 18,5 18 17 16,5 14,5 13,5 12
XHC 2-3 0,37 0,5 2,4 1 27 26 25 24 23 22 20 17 15
XHC 2-4 0,55 0,75 3,8 1,4 36 35 34 32 31 29 27 23 20
Hm
XHC 2-5 0,55 0,75 3,8 1,4 44 43 42 40 38 36 33 28,5 24
XHC 2-6 0,75 1 5,2 1,8 53 51,5 49 47 44 41 37 32 27
XHC 2-7 1 1,36 6,2 2,4 64 63 60,2 59 56 52 48 44 36
1055
XHC
XHC 4

70
4-7
65
60
4-6
55
50
4-5
45
40
4-4
35
30
4-3
25
20
4-2
15
10
0
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 Q (m3/h)
NPSH NPSH Eta

ft m Eta %
30 9 45
20 6 30
10 3 15
NPSH
0 0 0
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 Q (m3/h)
1 PH 3 PH
P2 l/min 16 25 33 41 50 58 66 75 83 91 100
Type 230 V 400 V
Q m3/h
kW HP A A 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6
XHC 4-2 0,37 0,5 2,4 1 18,5 18 17,5 17 16 15,5 15 13,5 13 11 10
XHC 4-3 0,55 0,75 3,8 1,4 29 28,5 28 27 26,5 35,5 25 23 22 20 18
XHC 4-4 0,75 1 5,2 1,8 38 37 36 34,5 33,5 32 30 28 26 24 20
Hm
XHC 4-5 1,0 1,36 6,2 2,4 47 46 45 44 42,5 41 40 38 35 32 27
XHC 4-6 1,3 1,7 8,4 3,1 56,5 55 54 53 52,5 51 49 47 44 41 36
XHC 4-7 1,5 2 9,2 3,5 68 66 65 64 63 60 58 55 52 47 42
1056
XHC
XHC 8

90
8-50
80
8-40
70
8-35
60
8-30
8-25
50
40
8-20
30 8-15
20 8-10
10
0
0 2 4 6 8 10 12 14 Q (m3/h)
NPSH NPSH Eta

ft m Eta %
15 4,5 60
10 3,0 40
5 1,5 20
NPSH
0 0 0
0 2 4 6 8 10 12 14 Q (m3/h)
1 PH 3 PH
P2 l/min 66 83 100 116 133 150 166
Type 230 V 400 V
Q m3/h
kW HP A A 4 5 6 7 8 9 10
XHC 8-10 0,55 0,75 3,8 1,4 15 14 13 12,5 12 9 8
XHC 8-15 0,75 1 5,2 1,8 25 23 22 21 20 14 12
XHC 8-20 1 1,3 6,2 2,4 32 29 27 25 24 21 17
XHC 8-25 1,5 2 9,2 3,5 43 40 38 34 27 25 20
Hm
XHC 8-30 1,85 2,5 13 4,1 50 46 44 40 36 30 26
XHC 8-35 2,2 3 14 4,9 56 51 48 44 43 35 28
XHC 8-40 2,2 3 14 4,9 65 57,5 57 50 48 42 34
XHC 8-50 3 4 - 6,3 78 73 67 62 55 47 40
1057
XHC
XHC 12
70
12-50
60
12-40
50
12-30
40
30
12-20
20
12-10
10
0
0 2 4 6 8 10 12 14 16 Q (m3/h)
NPSH NPSH Eta

ft m Eta %
20 6 60
15
4 40
10
2 NPSH
20
5
0 0 0
0 2 4 6 8 10 12 14 16 Q (m3/h)
1 PH 3 PH
P2 l/min 116 133 150 166 183 200 216 233 250 266
Type 230 V 400 V
Q m3/h
kW HP A A 7 8 9 10 11 12 13 14 15 16
XHC 12-10 0,75 1 5,2 1,8 12 11,5 11 10,5 10 9,5 9 8 7 6
XHC 12-20 1,1 1,5 9,2 3,5 23 22,5 22 21 20,5 19,5 18,5 17 15,5 13
XHC 12-30 1,85 2,5 13 4,1 Hm 35 34,5 33,5 32,5 31 29,5 28 26 23,5 20
XHC 12-40 2,2 3 14 4,9 47 46 45 43,5 41,5 39,5 37,5 35 31,5 27,5
XHC 12-50 3 4 - 6,3 60 58 56,5 55 52,5 50 47 44 40 35
1058
XHC
XHC 16

70
60
16-40
50
16-30
40
30
16-20
20
16-10
10
0
0 4 8 12 16 20 24 28 Q (m3/h)
NPSH NPSH Eta

ft m %
Eta
8 72
24
6 54
18
4 36
12
6 2 18
NPSH
0 0 0
0 4 8 12 16 20 24 28 Q (m3/h)
1 PH 3 PH
P2 l/min 133 166 200 233 266 300 333 366 400
Type 230 V 400 V
Q m3/h
kW HP A A 8 10 12 14 16 18 20 22 24
XHC 16-10 1 1,3 6,2 2,4 12 11,5 11 10,5 10 9 8 7 6
XHC 16-20 1,5 2 9,2 3,5 24 23 22 21 20 18 16 14 12
Hm
XHC 16-30 2,2 3 14 4,9 38 36 34 33 30 28 26 23 20
XHC 16-40 3 4 - 6,3 50 45 46 44 40 38 36 32 28
1059
XHC
XHC 20

70
60
20-40
50
20-30
40
30
20-20
20
20-10
10
0
0 4 8 12 16 20 24 28 Q (m3/h)
NPSH NPSH Eta

ft m Eta %
20 6,0 60
15 4,5 45
10 3,0 30
1,5 NPSH 15
5
0 0 0
0 4 8 12 16 20 24 28 Q (m3/h)
1 PH 3 PH
P2 l/min 166 200 233 266 300 333 366 400 433 466
Type 230 V 400 V
Q m3/h
kW HP A A 10 12 14 16 18 20 22 24 26 28
XHC 20-10 1 1,3 6,2 2,4 13 12,5 12 11,5 11 10,5 10 9 8,5 7,5
XHC 20-20 1,85 2,5 13 4,1 25 24 23 22 21 20 18 16 14 12
Hm
XHC 20-30 3 4 - 6,3 39 38 36 35 33 31,5 30 27 24 21
XHC 20-40 4 5,5 - 8,2 50 48 46 44 42 40 36 32 28 24
1060
MV
Vertical Multi Staged Offline Pump
MV 7 MV 12
MV 710 MV 1207
MV 1206
MV 708
MV 1205
MV 706 MV 1204
MV 705
MV 1203
P2 l/min 0 1 2 3 4,5 6 7,5 9 10,5

Model A Q m3/h
kW HP 0 16,7 33,3 50 75 100 125 150 175
MV 705 1,8 2,5 4 64 62 60 58 54 47 38 28 16
MV 706 2,2 3 4,8 76 74 71 68 63 56 45 34 20
H m
MV 708 3 4 6,5 103 100 97 95 90 80 66 50 31
MV 710 4 5,5 8,9 130 127 124 121 114 103 86 66 41
P2 l/min 0 2 4 6 8 10 12 14 16
Model A Q m3/h
kW HP 0 33 67 100 133 167 200 23 267
MV 1203 3 4 3,8 56 55 54 52 49 46 42 39 29
MV 1204 4 5,5 4,8 75 74 72 70 67 64 60 53 43
MV 1205 5,5 7,5 7 H m 93 91 87 84 81 77 72 64 55
MV 1206 5,5 7,5 9 113 110 107 104 100 96 87 78 68
MV 1207 7,5 10 11,5 132 128 124 120 116 112 103 93 80
1061
XVM
Vertical, Multi-Staged Stainless Steel Pumps
XVM 1
1-36
1-33
1-30
1-27
1-25
1-23
1-21
1-19
1-17
1-15
1-13
1-12
1-11
1-10
1-9
1-8
1-7
1-6
1-5
1-4
1-3
1-2
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2
1062
XVM
XVM 3
3-36
3-33
3-31
3-29
3-27
3-25
3-23
3-21
3-19
3-17
3-15
3-13
3-12
3-11
3-10
3-9
3-8
3-7
3-6
3-5
3-4
3-3
3-2
1063
XVM
XVM 5
5-36
5-32
5-29
5-26
5-24
5-22
5-20
5-18
5-16
5-15
5-14
5-13
5-12
5-11
5-10
5-9
5-8
5-7
5-6
5-5
5-4
5-3
5-2
0 1 2 3 4 5 6 7 8 9 Q (m3/h)
0 1 2 3 4 5 6 7 8 9 Q (m3/h)
0 1 2 3 4 5 6 7 8 9 Q (m3/h)
1064
XVM
XVM 10
10-22
10-20
10-18
10-16
10-14
10-12
10-10
10-9
10-8
10-7
10-6
10-5
10-4
10-3
10-2
10-1
70
60
50
40
30
0
0,0 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0 11,0 12,0 13,0 Q (m3/h)
0,0 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0 11,0 12,0 13,0 Q (m3/h)
1065
XVM
XVM 15
15-17
15-16
15-14
15-12
15-10
15-9
15-8
15-7
15-6
15-5
15-4
15-3
15-2
15-1
0,0 2,0 4,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 22,0
0,0 2,0 4,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 22,0
1066
XVM
XVM 20
20-17
20-16
20-14
20-12
20-10
20-8
20-7
20-6
20-5
20-4
20-3
20-2
20-1
0,0 2,0 4,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 22,0 24,0 26,0
0,0 2,0 4,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 22,0 24,0
1067
XVM
XVM 32
32-14
32-14-2
32-13
32-13-2
32-12
32-12-2
32-11
32-11-2
32-10
32-10-2
32-9
32-9-2
32-8
32-8-2
32-7
32-7-2
32-6
32-6-2
32-5
32-5-2
32-4
32-4-2
32-3
32-3-2
32-2
32-2-2
32-1
32-1-1
0,0 4,0 8,0 12,0 16,0 20,0 24,0 28,0 32,0 36,0
0,0 4,0 8,0 12,0 16,0 20,0 24,0 28,0 32,0 36,0
1068
XVM
XVM 45
45-13-2
45-12
45-12-2
45-11
45-11-2
45-10
45-10-2
45-9
45-9-2
45-8
45-8-2
45-7
45-7-2
45-6
45-6-2
45-5
45-5-2
45-4
45-4-2
45-3
45-3-2
45-2
45-2-2
45-1
45-1-1
0,0 5,0 10,0 15,0 20,0 25,0 30,0 35,0 40,0 45,0 50,0
0,0 5,0 10,0 15,0 20,0 25,0 30,0 35,0 40,0 45,0 50,0
1069
XVM
XVM 64
64-8-1
64-8-2
64-7
64-7-1
64-7-2
64-6
64-6-1
64-6-2
64-5
64-5-1
64-5-2
64-4
64-4-1
64-4-2
64-3
64-3-1
64-3-2
64-2
64-2-1
64-2-2
64-1
64-1-1
0,0 10,0 20,0 30,0 40,0 50,0 60,0 70,0
0,0 10,0 20,0 30,0 40,0 50,0 60,0 70,0
1070
XVM
XVM 90
90-6
90-6-2
90-5
90-5-2
90-4
90-4-2
90-3
90-3-2
90-2
90-2-2
90-1
90-1-1
0,0 10,0 20,0 30,0 40,0 50,0 60,0 70,0 80,0 90,0 100,0
0,0 10,0 20,0 30,0 40,0 50,0 60,0 70,0 80,0 90,0 100,0
1071
WTM
Monoblock Centrifugal Pumps
WTM 32-125 2900 rpm
η P%
32-125/1,1
32-125/0,75
32-125/1,1
32-125/0,75
FLOW RATE (Q) Part Material

P2
PUMP MODEL l/min 0 100 150 250 300 333 400 Pump Body Cast Iron
kW HP m3/h 0 6 9 15 18 20 24 Impeller AISI 304
WTM 32-125/0,75 0,75 1 17,5 16,7 15,3 11,9 9,1 Shaft AISI 304
H (m)
WTM 32-125/1,1 1,1 1,5 22 21,4 20,3 17,1 15 13,4 9,8 Mechanical Seal CA/SIC/NBR
1072
WTM
WTM 32-160 2900 rpm
η P%
32-160/3
32-160/2,2
32-160/1,5
32-160/3
32-160/2,2
32-160/1,5

P2
PUMP MODEL l/min 0 100 150 250 300 333 400 450 Pump Body Cast Iron
kW HP m3/h 0 6 9 15 18 20 24 27
Impeller AISI 304
WTM 32-160/1,5 1,5 2 25,4 23,7 22,2 18,1 15,6
WTM 32-160/2,2 2,2 3 H (m) 31 29,8 28,3 24,3 21,6 19,7 15 Shaft AISI 304
WTM 32-160/3 3 4 35 33,2 32 28 25,3 23 18,7 15 Mechanical Seal CA/SIC/NBR
1073
WTM
WTM 32-200 2900 rpm
η P%
32-200/4
32-200/3
32-200/4
32-200/3

P2
PUMP MODEL l/min 0 100 150 250 300 333 400 450 Pump Body Cast Iron
kW HP m3/h 0 6 9 15 18 20 24 27 Impeller AISI 304
WTM 32-200/3 3 4 44,2 43 40,4 35,2 32 29,5 24 19,8 Shaft AISI 304
H (m)
WTM 32-200/4 4 5,5 54,5 51,9 50 45 41,8 39,5 34,2 30,1 Mechanical Seal CA/SIC/NBR
1074
WTM
WTM 32-250 2900 rpm
η P%
32-250/7,5
32-250/5,5
32-250/7,5
32-250/5,5
FLOW RATE ( Q ) Part Material

P2
PUMP MODEL l/min 0 100 150 250 300 333 400 Pump Body Cast Iron
kW HP m3/h 0 6 9 15 18 20 24 Impeller AISI 304
WTM 32-250/5,5 5,5 7,5 79,5 74,2 71,5 62 56 50,8 37 Shaft AISI 304
H (m)
WTM 32-250/7,5 7,5 10 99,5 95,1 92 82,8 76 70,8 57,8 Mechanical Seal CA/SIC/NBR
1075
WTM
WTM 40-125 2900 rpm
η P%
40-125/2,2
40-125/1,1 40-125/1,5
40-125/2,2
40-125/1,5
40-125/1,1

P2
PUMP MODEL l/min 0 100 150 250 300 333 400 450 500 600 700 750 800 Pump Body Cast Iron
kW HP m3/h 0 6 9 15 18 20 24 27 30 36 42 45 48
Impeller Cast Iron
WTM 40-125/1,1 1,1 1,5 14,7 13 12,4 11,3 10 8,7 5,8
Shaft AISI 304
WTM 40-125/1,5 1,5 2 H (m) 18,1 16,6 16 15 13,9 12,6 9,6 6
WTM 40-125/2,2 2,2 3 24,5 23 22,4 21,2 20 18,8 15,9 12,1 10 8,1 Mechanical Seal CA/SIC/NBR
1076
WTM
WTM 40-160 2900 rpm
η P%
40-160/4
40-160/3
40-160/4
40-160/3

PUMP P2
l/min 0 300 333 400 450 500 600 700 750 800 900 1000 1083 1200 1333 1400 1500 Pump Body Cast Iron
MODEL
kW HP m3/h 0 18 20 24 27 30 36 42 45 48 54 60 65 72 80 84 90 Impeller Cast Iron
WTM 40-160/3 3 4 31,8 29,5 28,8 27,3 26 24,6 21,4 17,3 Shaft AISI 304
H (m)
WTM 40-160/4 4 5,5 38 36,1 35,6 34,2 33 31,6 28,6 24,8 22,4 20,1 Mechanical Seal CA/SIC/NBR
1077
WTM
WTM 40-200 2900 rpm
η P%
40-200/7,5
40-200/5,5
40-200/7,5
40-200/5,5

P2
PUMP MODEL l/min 0 300 333 400 450 500 600 700 750 800 900 1000 1083 1200 1333 1400 1500 Pump Body Cast Iron
kW HP m3/h 0 18 20 24 27 30 36 42 45 48 54 60 65 72 80 84 90 Impeller AISI 304
WTM 40-200/5,5 5,5 7,5 46 43,8 42,8 41,2 40 37 34 29,6 Shaft AISI 304
H (m)
WTM 40-200/7,5 7,5 10 57 54 53 51,5 50 47,1 45 41 38 36 Mechanical Seal CA/SIC/NBR
1078
WTM
WTM 40-250 2900 rpm
η P%
40-250/15
40-250/11
40-250/9,2
40-250/15
40-250/11
40-250/9,2

P2
PUMP MODEL l/min 0 300 333 400 450 500 600 700 750 800 Pump Body Cast Iron
kW HP m3/h 0 18 20 24 27 30 36 42 45 48
Impeller AISI 304
WTM 40-250/9,2 9,2 12,5 64 59 58 56,2 55 52,8 49,3 44,8 42 39,5
Shaft AISI 304
WTM 40-250/11 11 15 H (m) 72 66,5 66 64,8 63 61 57,2 52,2 49 46,8
WTM 40-250/15 15 20 84,5 79 78,4 77,1 75,2 73,6 69 65 62,5 59 Mechanical Seal CA/SIC/NBR
1079
WTM
WTM 50-125 2900 rpm
η P%
50-125/4
50-125/3
50-125/2,2
50-125/4
50-125/3
50-125/2,2

P2
PUMP MODEL l/min 0 600 700 750 800 900 1000 1083 1200 1333 1400 1500 Pump Body Cast Iron
kW HP m3/h 0 36 42 45 48 54 60 65 72 80 84 90 Impeller Cast Iron
WTM 50-125/2,2 2,2 3 17 15 14 13,3 12,7 11,1 9,8 8,1 6,1
Shaft AISI 304
WTM 50-125/3 3 4 H (m) 20 18,8 17,9 17,2 16,8 15,6 14 12,6 10,6
WTM 50-125/4 4 5,5 24 23,2 22,3 21,9 21,4 20,2 19 17,9 15,5 13 11,6 11,6 Mechanical Seal CA/SIC/NBR
1080
WTM
WTM 50-160 2900 rpm
η P%
50-160/7,5
50-160/5,5
50-160/7,5
50-160/5,5

P2
kW HP m3/h 0 36 42 45 48 54 60 65 72 80 84 90 Impeller Cast Iron
WTM 50-160/5,5 5,5 7,5 32 30,6 29,5 29 27,8 26,6 25 23 20,5 17 14,8 Shaft AISI 304
H (m)
WTM 50-160/7,5 7,5 10 40 38 37 36,5 35,6 34,2 33 31,4 29 26 24 21,3 Mechanical Seal CA/SIC/NBR
1081
WTM
WTM 50-200 2900 rpm
η P%
50-200/11
50-200/9,2
50-200/11
50-200/9,2

P2
kW HP m3/h 0 36 42 45 48 54 60 65 72 80 84 90 Impeller AISI 304
WTM 50-200/9,2 9,2 12,5 50,5 46,5 45 44 42,8 40,4 38,1 36 32,2 28 25,7 Shaft AISI 304
H (m)
WTM 50-200/11 11 15 57,5 53,6 51,9 51 50 47,5 45,8 43,4 40 35,7 32,4 29 Mechanical Seal CA/SIC/NBR
1082
WTM
WTM 50-250 2900 rpm
η P%
50-250/22
50-250/18,5
50-250/15
50-250/22
50-250/18,5
50-250/15

P2
kW HP m3/h 0 36 42 45 48 54 60 65 72 80 84 90
Impeller AISI 304
WTM 50-250/15 15 20 68,5 64 62,9 62 61 58,4 56 54 50 44 41
Shaft AISI 304
WTM 50-250/18,5 18,5 25 H (m) 77 73,2 71,8 71 70,1 68,1 66 64 60,2 54,1 51,5 47
WTM 50-250/22 22 30 86,3 82,8 81,3 80,3 79,8 78 76 73,2 69,4 64,2 61,9 56,4 Mechanical Seal CA/SIC/NBR
1083
WTM
WTM 65-125 2900 rpm
η P%
65-125/7,5
65-125/5,5
65-125/4
65-125/7,5
65-125/5,5
65-125/4

P2
kW HP m3/h 0 48 54 60 65 72 80 84 90 100 108 120
Impeller Cast Iron
WTM 65-125/4 4 5,5 19 17,3 16,8 16 15,5 14,5 13,3 12,8 11,8
Shaft AISI 304
WTM 65-125/5,5 5,5 7,5 H (m) 23 21,3 20,9 20,3 19,9 19 18 17,5 16,7 15 13,7
WTM 65-125/7,5 7,5 10 27 26 25,6 25,1 24,9 24,3 23,5 23 22,4 21 19,8 18 Mechanical Seal CA/SIC/NBR
1084
WTM
WTM 65-160 2900 rpm
η P%
65-160/15
65-160/11
65-160/9,2
65-160/15
65-160/11
65-160/9,2

P2
kW HP m3/h 0 48 54 60 65 72 80 84 90 100 108 120 138
Impeller Cast Iron
WTM 65-160/9,2 9,2 12,5 33 31,6 31 30,4 29,8 28,7 28 27,1 25,8 24 21,8
Shaft AISI 304
WTM 65-160/11 11 15 H (m) 36 34,3 34 33,8 33 32 31,8 30,8 29,7 28,1 25,9
WTM 65-160/15 15 20 42 41 40,7 40,3 40 39,1 38,4 38 36,6 35,2 33,1 29,5 Mechanical Seal CA/SIC/NBR
1085
WTM
WTM 65-200 2900 rpm
65-200/22
65-200/18,5
65-200/15
65-200/22
65-200/18,5
65-200/15

P2
kW HP m3/h 0 48 54 60 65 72 80 84 90 100 108 120
Impeller Cast Iron
WTM 65-200/15 15 20 45,5 46 45,2 44,9 43,5 42 41 39,8 36,5 33
Shaft AISI 304
WTM 65-200/18,5 18,5 25 H (m) 53 53,5 53 52,3 51,2 49 48,3 47 44 41,5
WTM 65-200/22 22 30 59 59,5 59 58 57,2 55 54 53 50 47 43,5 Mechanical Seal CA/SIC/NBR
1086
WTM
WTM 65-250 2900 rpm
η P%
65-250/37
65-250/30
65-250/22
65-250/37
65-250/30
65-250/22

P2
kW HP m3/h 0 48 54 60 65 72 80 84 90 100 108 120 138
Impeller Cast Iron
WTM 65-250/22 22 30 62 61,3 60 59 58 56,1 55,7 54 51 48 44,1
Shaft AISI 304
WTM 65-250/30 30 40 H (m) 76 74,8 74 73,4 72,3 71 70,1 69 66,1 64 61 54
WTM 65-250/37 37 50 90 88 87 86,1 85,2 84 83,2 82,1 80 77,5 74 68 Mechanical Seal CA/SIC/NBR
1087
WTM
WTM 80-160 2900 rpm
η P%
80-160/18,5
80-160/15
80-160/11
80-160/18,5
80-160/15
80-160/11

P2
kW HP m3/h 0 90 100 108 120 138 150 160 170 180 190 200 210
Impeller Cast Iron
WTM 80-160/11 11 15 27 27,3 26,6 25,9 24,6 22,1 20,8 19 17,4 15,7 14 12
Shaft AISI 304
WTM 80-160/15 15 20 H (m) 32,8 32,6 32 31,3 30,2 27,8 26,2 25 23,4 21,8 20 18 16,5
WTM 80-160/18,5 18,5 25 39 38 37,4 36,8 35,7 33,7 32,4 31,1 30 28,6 26,9 25 23,2 Mechanical Seal CA/SIC/NBR
1088
WTM
WTM 80-200 2900 rpm
η P%
80-200/30
80-200/22
80-200/30
80-200/22

P2
kW HP m3/h 0 90 100 108 120 138 150 160 170 180 190 200 210 Impeller AISI 304
WTM 80-200/22 22 30 48 46,8 45,9 45 43,5 40,5 38,5 36,3 34,5 32,4 30 27,2 24,5 Shaft AISI 304
H (m)
WTM 80-200/30 30 40 60 59,3 58,8 58 56,8 54 52,1 50,5 48,6 46,8 44,8 42,1 40,3 Mechanical Seal CA/SIC/NBR
1089
WTM
WTM 80-250 2900 rpm
η P%
80-250/55
80-250/45
80-250/37
80-250/55
80-250/45
80-250/37

P2
kW HP m3/h 0 90 100 108 120 138 150 160 170 180 190 200 210
Impeller Cast Iron
WTM 80-250/37 37 50 71,5 70,1 68,1 67 65,6 61 58 55,5 52 49,2 45,8 42 38,1
Shaft AISI 304
WTM 80-250/45 45 60 H (m) 80 80,3 78,7 78 76,1 72,1 70 67 64 62 58,1 54,4 51
WTM 80-250/55 55 75 92,5 93,4 92 91,2 89,8 86,1 84 81,8 79,8 77 74 71,8 68,1 Mechanical Seal CA/SIC/NBR
1090
WTX
Complete Stainless Steel Monoblock Process Pumps
WTX 32-160
0 20 40 60 Q(IM.GPM) 0 20 40 60 Q
0 20 40 60 80 Q(US.GPM) 0 20 40 60 80 Q
H H H
(m) (ft) (m)
35 70
30 100 60
25 50
75
20 40
-160/2.2
15 50 30
10 -160/1.5 20
-160/1.1 25
5 10
0 0 0
0 3 6 9 12 15 1 8 21 24 Q (m 3 /h) 0 3 6 9 12 15 1 8 21
0 100 200 300 Q(L/min) 0 100 200 300
NPSH -160/1.1
Eta NPSH
-160/2.2 -160/1.1/1.5 (%) (m) -200/3.0
(m)
-160/1.5
3 -160/1.1 60 3 -200/5.5
-200/4.0
Eta
2 40 2
Eta
1 NPSH 20 1
NPSH
0 0 0
0 3 6 9 12 15 1 8 21 24 Q (m 3 /h) 0 3 6 9 12 15 1 8 21
P2 P2
(kW) (kW)
2.5 5.0
-160/2.2
2.0 4.0
1.5 -160/1.5 3.0

-160/1.1
1.0 2.0
0.5 1.0
0 0
0 3 6 9 12 15 1 8 21 24 Q (m 3 /h) 0 3 6 9 12 15 1 8 21
FLOW RATE (Q)

PUMP P2
l/min 0 50 100 150 166 200 208 250 300 333 350 336
MODEL
kW HP m3/h 0 3 6 9 10 12 12,5 15 18 20 21 22
WTX 32-160/1,1 1,1 1,5 21,5 21 20 18,5 17,7 16,9 16,5 15 12,5 10 8,7 8
WTX 32-160/1,5 1,5 2 H (m) 27 26 24,5 22,5 21,3 20,4 20 18 15 12,5 11 9,5
WTX 32-160/2,2 2,2 3 32 30,5 29,5 27,5 27 26,2 26 24 22 20 18,7 18
1091
WTX
WTX 32-200
0 40 60 Q(IM.GPM) 0 20 40 60 Q(IM.GPM)
40 60 80 Q(US.GPM) 0 20 40 60 80 Q(US.GPM)
H H H
(ft) (m) (ft)
70
100 60 200
50
75 150
40
-200/5.5
-160/2.2
50 30 -200/4.0 100
-200/3.0
-160/1.5 20
-160/1.1 25 50
10
0 0 0
9 12 15 1 8 21 24 Q (m 3 /h) 0 3 6 9 12 15 1 8 21 24 Q (m 3 /h)
00 200 300 Q(L/min) 0 100 200 300 Q (L/min)
-160/1.1
Eta NPSH Eta
-160/2.2 -160/1.1/1.5 (%) (m) -200/3.0 (%)
.5 -200/3.0
-160/1.1 60 3 -200/5.5 60
-200/4.0 -200/4.0/5.0
40 2 40
Eta
NPSH 20 1 20
NPSH
0 0 0
9 12 15 1 8 21 24 Q (m 3 /h) 0 3 6 9 12 15 1 8 21 24 Q (m 3 /h)
P2
(kW) -200/5.5
5.0
-160/2.2 -200/4.0
4.0
-160/1.5 3.0 -200/3.0

-160/1.1
2.0
1.0
0
9 12 15 1 8 21 24 Q (m 3 /h) 0 3 6 9 12 15 1 8 21 24 Q (m 3 /h)
FLOW RATE (Q)

PUMP P2
l/min 0 50 100 150 166 200 208 250 300 333 350 366
MODEL
kW HP m3/h 0 3 6 9 10 12 12,5 15 18 20 21 22
WTX 32-200/3 3 4 39 38 37 35,2 34,8 33,8 33,5 32 29,3 27,8 27 26
WTX 32-200/4 4 5,5 H (m) 54 51,5 50 48 47 45,4 45 43 40,7 36,7 36 30
WTX 32-200/5,5 5,5 7,5 65 62 60,4 58 57 54,9 54 51,4 46,8 42 40 37
1092
WTX
WTX 40-125
0 20 40 60 80 100 120 Q(IM.GPM) 0 20 40 60 80 100 120 Q
0 50 100 150 Q(US.GPM) 0 50 100 150 Q

H H H
(m) (ft) (m)
35 70
30 100 60
25 50
75
20 40
-125/3.0
15 50 30
-125/2.2
10 -125/1.5 20
25
5 10
0 0 0
0 10 20 30 40 Q(m3 /h) 0 10 20 30 4
0 200 400 600 Q(L/min) 0 200 400 600
NPSH -125/2.2
Eta NPSH
-125/1.5 -200/7.5
(m) (%) (m) -160/4.0
-200/5.5
3 60 3 -200/11
2 Eta -125/3.0 40 2
-125/3.0
Eta
-125/1.5
-125/2.2
1 20 1
NPSH NPSH
0 0 0
0 10 20 30 40 Q(m3 /h) 0 10 20 30 4
P2 P2
(kW) -125/3.0 (kW)
2.5 10
-125/2.2
2.0 8
1.5 -125/1.5 6
1.0 4
0.5 2
0 0
0 10 20 30 40 Q(m3 /h) 0 10 20 30 4
FLOW RATE (Q)

PUMP P2
l/min 0 83 166 200 250 300 333 350 416 500 583
MODEL
kW HP m3/h 0 5 10 12 15 18 20 21 25 30 35
WTX 40-125/1,5 1,5 2 21 20 18,7 18 17,5 16,5 16 15,5 13,5 10,5
WTX 40-125/2,2 2,2 3 H (m) 28 27 26 25 24 23 22 21,5 20 17 14
WTX 40-125/3 3 4 31 31 30 29,2 28,6 27,5 27 26,5 25 22 18
1093
WTX
WTX 40-160 & 200
40 60 80 100 120 Q(IM.GPM) 0 20 40 60 80 100 120 Q(IM.GPM)
50 100 150 Q(US.GPM) 0 50 100 150 Q(US.GPM)

H H H
(ft) (m) (ft)
70
100 60 200
-200/11
50
75 150
40
-125/3.0 -200/7.5
50 30 100
-125/2.2 -200/5.5
-125/1.5 20
25 -160/4.0 50
10
0 0 0
10 20 30 40 Q(m3 /h) 0 10 20 30 40 Q(m3 /h)
200 400 600 Q(L/min) 0 200 400 600 Q(L/min)
-125/2.2
Eta NPSH Eta
5/1.5 -200/7.5
(%) (m) -160/4.0 (%)
-200/5.5
60 3 -200/11 60
-125/3.0 40 2 40
125/3.0
Eta
-125/1.5
-125/2.2
20 1 20
PSH NPSH
0 0 0
10 20 30 40 Q(m3 /h) 0 10 20 30 40 Q(m3 /h)
P2
-125/3.0 (kW) -200/11
10
-125/2.2
8
-200/7.5
-125/1.5 6 -200/5.5
4 -160/4.0
0
10 20 30 40 Q(m3 /h) 0 10 20 30 40 Q(m3 /h)
FLOW RATE (Q)

PUMP P2
l/min 0 83 166 200 250 300 333 350 416 500 583 666
MODEL
kW HP m3/h 0 5 10 12 15 18 20 21 25 30 35 40
WTX 40-160/4 4 5,5 40 39 38 37 36,5 34,9 34 33,5 31 28 24 19
WTX 40-200/5,5 5,5 7,5 47 46 46 45,7 45,5 44 43,5 43 41 38 34 30
H (m)
WTX 40-200/7,5 7,5 10 52 51 51,5 51,2 51 49,8 49,5 48,7 47,5 45 42 38
WTX 40-200/11 11 15 69 68 69 68,7 68,5 68,2 68 67,7 67 66 64 60
1094
WTX
WTX 50-125
0 50 100 150 200 Q(IM.GPM) 0 50 100 150 200 Q
0 50 100 150 200 250 Q(US.GPM) 0 50 100 150 200 250 Q

H H H
(m) (ft) (m)
35 70
30 100 60
25 50
75
20 40
-200/9
15 50 30
-
-125/4.0
10 -125/3.0 20 -
25
5 10
0 0 0
0 10 20 30 40 50 60 Q(m3 /h) 0 10 20 30 40 50 60
0 250 500 700 1000 Q(L/min) 0 250 500 700 100
NPSH Eta NPSH

(m) (%) (m) -200/11
4 -200/9.2
3 60
-125/4.0 -160/5.5
Eta 3
-125/3.0 -200/7.5
2 40 -200/15
NPSH
2 NPSH -200/18
1 20
1
Eta
0 0 0
0 10 20 30 40 50 60 Q(m /h)3
0 10 20 30 40 50 60
P2 P2
(kW) (kW)
5.0 16
4.0 -125/4.0
12
3.0 -125/3.0
-
8
-
2.0
-
4
1.0
0 0
0 10 20 30 40 50 60 Q(m3 /h) 0 10 20 30 40 50 60
FLOW RATE (Q)

PUMP P2
l/min 0 250 300 333 350 416 500 583 666 750 833
MODEL
kW HP m3/h 0 15 18 20 21 25 30 35 40 45 50
WTX 50-125/3 3 4 27 23,7 23,3 23 22,5 21,3 20 17,5 16 12,6 10
H (m)
WTX 50-125/4 4 5,5 28 26,3 25,6 25,3 24,8 23,7 23 21,3 19,8 17,5 16
1095
WTX
WTX 50-160 & 200
0 100 150 200 Q(IM.GPM) 0 50 100 150 200 Q(IM.GPM)
100 150 200 250 Q(US.GPM) 0 50 100 150 200 250 Q(US.GPM)
H H H
(ft) (m) (ft)
70
-200/18.5
100 60 200
50 -200/15
75 150
40 -200/11
-200/9.2
50 30 100
-200/7.5
-125/4.0
-125/3.0 20 -160/5.5
25 50
10
0 0 0
20 30 40 50 60 Q(m3 /h) 0 10 20 30 40 50 60 Q(m3 /h)
50 500 700 1000 Q(L/min) 0 250 500 700 1000 Q(L/min)
Eta NPSH Eta

(%) (m) -200/11 (%)
4 -200/9.2 80
60
-125/4.0 -160/5.5
-125/3.0 3 -200/7.5 60
40 -200/15
PSH 40
2 NPSH -200/18.5
20 20
1
Eta
0 0 0
20 30 40 50 60 Q(m3 /h) 0 10 20 30 40 50 60 Q(m3 /h)
P2
-200/18.5
(kW)
16 -200/15
-125/4.0
-200/11
12
-125/3.0
-200/9.2
8
-200/7.5
-160/5.5
4
0
20 30 40 50 60 Q(m3 /h) 0 10 20 30 40 50 60 Q(m3 /h)
FLOW RATE (Q)

PUMP P2
l/min 0 333 350 416 500 583 666 750 833 916 1000
MODEL
kW HP m3/h 0 20 21 25 30 35 40 45 50 55 60
WTX 50-160/5,5 5,5 7,5 35 34 33,9 32,5 31,5 30 28,5 27 24,9
WTX 50-200/7,5 7,5 10 H (m) 42 40,5 40,4 40 39 37,5 36 34 32
WTX 50-200/9,2 9,2 12,5 52 50 49,9 49 48,5 47 45 43 41
WTX 50-200/11 11 15 58 55 54,8 54,4 53 52 51 48,5 47 35 31
WTX 50-200/15 15 20 71 67,5 66,9 66,5 65,2 64,8 63,5 62 60 53 50
WTX 50-200/18,5 18,5 25 73 71 70,8 70,5 70,1 69,9 69 68 67 62 59
1096
WTX
WTX 65
140 140
0 500 1000 1500 2000 0 500 1000 1500 2000
140 140
140 140
0 500 1000 1500 2000 0 500 1000 1500 2000
FLOW RATE (Q)

PUMP P2
l/min 0 666 833 1000 1083 1166 1333 1416 1500 1666 1833 2000 2166
MODEL
kW HP m3/h 0 40 50 60 65 70 80 85 90 100 110 120 130
WTX 65-125/4 4 5,5 21 19 18 16,8 16 15 13 12 11 9
WTX 65-125/5,5 5,5 7,5 24 22 21 20,3 19,5 19 18 17 16,1 14,8 12,7 10
WTX 65-125/7,5 7,5 10 28 27 26 25,5 25 24,3 23 22,2 21,9 20 18 15
WTX 65-125/9,2 9,2 12,5 31 30 29,4 29 28,4 28,1 27 26,5 26,1 25 23,5 22 19
WTX 65-160/11 11 15 H (m) 37 36 35 34 33,4 33 32 31,5 31 29 27 25 22
WTX 65-160/15 15 20 46 44 43 42 41 40,3 39 38,5 38 37 35,8 33,5 32
WTX 65-200/18,5 18,5 25 55 53 52 51,4 51 50,3 49 48,5 48 47 45,3 44 41
WTX 65-200/22 22 30 63 60 59,6 58,2 57,5 57 56,5 55,8 55 54 53 50,5 49
WTX 65-200/30 30 40 75 73 72 71,5 71 70,1 69,5 69 68 67 66 64 63
1097
WTX
WTX 80
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
FLOW RATE (Q)

PUMP P2
l/min 0 1000 1083 1166 1333 1416 1500 1666 1833 2000 2166 2333 2500 2666 2833 3000 3200 3333
MODEL
kW HP m3/h 0 60 65 70 80 85 90 100 110 120 130 140 150 160 170 180 192 200
WTX 80-160/11 11 15 27 26 25,5 25 24,5 24 23,5 23 22,5 22 21,4 20 18,5 17 16,6 14,5 11
WTX 80-160/15 15 20 36 34,9 34,5 33,7 33 32,4 32 31 30,2 29 28,5 27 26 24 22,5 21,3 19 18
WTX 80-160/18,5 18,5 25 42 39,5 39 38,8 38 37,5 37 36,5 36 35,1 33,7 33 31,2 30 27,5 26,5 23,5 22
H (m)
WTX 80-200/22 22 30 49 46 45,5 45 44,5 44 43,5 43 41 40,6 39,5 38 36,5 35 33 31 27 26
WTX 80-200/30 30 40 61 57,5 57 56,5 56 55,5 55,3 55 53 52 50 49 47,5 46 43 41 37 36
WTX 80-200/37 37 50 69 66 65,7 65,5 65 64,5 64 63 62,5 61 60 59 57,5 56 53 51,5 48,5 47
1098
WDRIVE 1
Performance Table
Voltage Motor Power Flow Operating Diameter of Manifold

Model Phase
(V) kW HP (m3/h) Pressure (mWC) Suction Discharge
WDRIVE-1 XVM 1-7 3 230 0,37 0,55 1,6 33 1" 1"
WDRIVE-1 XVM 1-8 3 230 0,55 0,75 1,6 38 1” 1”
WDRIVE-1 XVM 1-9 3 230 0,55 0,75 1,6 44 1” 1”
WDRIVE-1 XVM 1-10 3 230 0,55 0,75 1,6 48 1” 1”
WDRIVE-1 XVM 1-11 3 230 0,55 0,75 1,6 54 1” 1”
WDRIVE-1 XVM 1-12 3 230 0,75 1 1,6 58 1” 1”
WDRIVE-1 XVM 1-13 3 230 0,75 1 1,6 63 1” 1”
WDRIVE-1 XVM 1-15 3 230 0,75 1 1,6 72 1” 1”
WDRIVE-1 XVM 1-17 3 230 1,1 1,5 1,6 81 1” 1”
WDRIVE-1 XVM 1-19 3 230 1,1 1,5 1,6 91 1” 1”
WDRIVE-1 XVM 1-21 3 230 1,1 1,5 1,6 101 1” 1”
WDRIVE-1 XVM 1-23 3 230 1,1 1,5 1,6 111 1” 1”
WDRIVE-1 XVM 1-25 3 230 1,5 2 1,6 121 1” 1”
WDRIVE-1 XVM 1-27 3 230 1,5 2 1,6 130 1” 1”
WDRIVE-1 XVM 1-30 3 230 1,5 2 1,6 145 1” 1”
WDRIVE-1 XVM 1-33 3 230 2,2 3 1,6 160 1” 1”
WDRIVE-1 XVM 1-36 3 230 2,2 3 1,6 174 1” 1”
WDRIVE-1 XVM 3-6 3 230 0,55 0,75 3 26 1” 1”

WDRIVE-1 XVM 3-7 3 230 0,55 0,75 3 30 1” 1”
WDRIVE-1 XVM 3-8 3 230 0,75 1 3 35 1” 1”
WDRIVE-1 XVM 3-9 3 230 0,75 1 3 39 1” 1”
WDRIVE-1 XVM 3-10 3 230 0,75 1 3 43 1” 1”
WDRIVE-1 XVM 3-11 3 230 1,1 1,5 3 48 1” 1”
WDRIVE-1 XVM 3-12 3 230 1,1 1,5 3 52 1” 1”
WDRIVE-1 XVM 3-13 3 230 1,1 1,5 3 57 1” 1”
WDRIVE-1 XVM 3-15 3 230 1,1 1,5 3 68 1” 1”
WDRIVE-1 XVM 3-17 3 230 1,5 2 3 79 1” 1”
WDRIVE-1 XVM 3-19 3 230 1,5 2 3 88 1” 1”
WDRIVE-1 XVM 3-21 3 230 2,2 3 3 97 1” 1”
WDRIVE-1 XVM 3-23 3 230 2,2 3 3 105 1” 1”
1099
WDRIVE 1
Performance Table

Model Phase
WDRIVE-1 XVM 3-25 3 230 2,2 3 3 113 1” 1”
WDRIVE-1 XVM 3-27 3 230 2,2 3 3 123 1” 1”
WDRIVE-1 XVM 3-29 3 230 2,2 3 3 132 1” 1”
WDRIVE-1 XVM 3-31 3 400 3 4 3 141 1” 1”
WDRIVE-1 XVM 3-33 3 400 3 4 3 150 1” 1”
WDRIVE-1 XVM 3-36 3 400 3 4 3 166 1” 1”
WDRIVE-1 XVM 5-6 3 230 1,1 1,5 5,5 28 1¼” 1¼”

WDRIVE-1 XVM 5-7 3 230 1,1 1,5 5,5 33 1¼” 1¼”
WDRIVE-1 XVM 5-8 3 230 1,1 1,5 5,5 38 1¼” 1¼”
WDRIVE-1 XVM 5-9 3 230 1,5 2 5,5 42 1¼” 1¼”
WDRIVE-1 XVM 5-10 3 230 1,5 2 5,5 47 1¼” 1¼”
WDRIVE-1 XVM 5-11 3 230 2,2 3 5,5 52 1¼” 1¼”
WDRIVE-1 XVM 5-12 3 230 2,2 3 5,5 58 1¼” 1¼”
WDRIVE-1 XVM 5-13 3 230 2,2 3 5,5 64 1¼” 1¼”
WDRIVE-1 XVM 5-14 3 230 2,2 3 5,5 69 1¼” 1¼”
WDRIVE-1 XVM 5-15 3 230 2,2 3 5,5 75 1¼” 1¼”
WDRIVE-1 XVM 5-16 3 230 2,2 3 5,5 80 1¼” 1¼”
WDRIVE-1 XVM 5-18 3 400 3 4 5,5 90 1¼” 1¼”
WDRIVE-1 XVM 5-20 3 400 3 4 5,5 99 1¼” 1¼”
WDRIVE-1 XVM 5-22 3 400 4 5,5 5,5 110 1¼” 1¼”
WDRIVE-1 XVM 5-24 3 400 4 5,5 5,5 120 1¼” 1¼”
WDRIVE-1 XVM 5-26 3 400 4 5,5 5,5 131 1¼” 1¼”
WDRIVE-1 XVM 5-29 3 400 4 5,5 5,5 150 1¼” 1¼”
WDRIVE-1 XVM 5-33 3 400 5,5 7,5 5,5 166 1¼” 1¼”
WDRIVE-1 XVM 5-36 3 400 5,5 7,5 5,5 188 1¼” 1¼”
WDRIVE-1 XVM 10-3 3 230 1,1 1,5 10 25 2” 2”

WDRIVE-1 XVM 10-4 3 230 1,5 2 10 32 2” 2”
WDRIVE-1 XVM 10-5 3 230 2,2 3 10 39 2” 2”
WDRIVE-1 XVM 10-6 3 230 2,2 3 10 46 2” 2”
WDRIVE-1 XVM 10-7 3 400 3 4 10 54 2” 2”
WDRIVE-1 XVM 10-8 3 400 3 4 10 62 2” 2”
WDRIVE-1 XVM 10-9 3 400 3 4 10 71 2” 2”
1100
WDRIVE 1
Performance Table

Model Phase
WDRIVE-1 XVM 10-10 3 400 4 5,5 10 81 2” 2”
WDRIVE-1 XVM 10-12 3 400 4 5,5 10 95 2” 2”
WDRIVE-1 XVM 10-14 3 400 5,5 7,5 10 110 2” 2”
WDRIVE-1 XVM 10-16 3 400 5,5 7,5 10 125 2” 2”
WDRIVE-1 XVM 10-18 3 400 7,5 10 10 144 2” 2”
WDRIVE-1 XVM 10-20 3 400 7,5 10 10 160 2” 2”
WDRIVE-1 XVM 10-22 3 400 7,5 10 10 178 2” 2”
WDRIVE-1 XVM 15-3 3 400 3 4 16 31 2” 2”

WDRIVE-1 XVM 15-4 3 400 4 5,5 16 43 2” 2”
WDRIVE-1 XVM 15-5 3 400 4 5,5 16 54 2” 2”
WDRIVE-1 XVM 15-6 3 400 5,5 7,5 16 65 2” 2”
WDRIVE-1 XVM 15-7 3 400 5,5 7,5 16 78 2” 2”
WDRIVE-1 XVM 15-8 3 400 7,5 10 16 90 2” 2”
WDRIVE-1 XVM 15-9 3 400 7,5 10 16 103 2” 2”
WDRIVE-1 XVM 15-10 3 400 11 15 16 116 2” 2”
WDRIVE-1 XVM 15-12 3 400 11 15 16 135 2” 2”
WDRIVE-1 XVM 15-14 3 400 11 15 16 156 2” 2”
WDRIVE-1 XVM 15-16 3 400 15 20 16 179 2” 2”
WDRIVE-1 XVM 15-17 3 400 15 20 16 193 2” 2”
WDRIVE-1 XVM 20-3 3 400 4 5,5 20 32 2" 2"

WDRIVE-1 XVM 20-4 3 400 5,5 7,5 20 43 2” 2”
WDRIVE-1 XVM 20-5 3 400 5,5 7,5 20 55 2” 2”
WDRIVE-1 XVM 20-6 3 400 7,5 10 20 66 2” 2”
WDRIVE-1 XVM 20-7 3 400 7,5 10 20 77 2” 2”
WDRIVE-1 XVM 20-8 3 400 11 15 20 89 2” 2”
WDRIVE-1 XVM 20-10 3 400 11 15 20 112 2” 2”
WDRIVE-1 XVM 20-12 3 400 15 20 20 136 2” 2”
WDRIVE-1 XVM 20-14 3 400 15 20 20 161 2” 2”
1101
WDRIVE 1
Performance Table

Model Phase
WDRIVE-1 XVM 32-2 3 400 4 5,5 30 26 DN 65 DN 65
WDRIVE-1 XVM 32-3-2 3 400 4 5,5 30 34 DN 65 DN 65
WDRIVE-1 XVM 32-3 3 400 5,5 7,5 30 39 DN 65 DN 65
WDRIVE-1 XVM 32-4-2 3 400 7,5 10 30 47 DN 65 DN 65
WDRIVE-1 XVM 32-4 3 400 7,5 10 30 53 DN 65 DN 65
WDRIVE-1 XVM 32-5-2 3 400 11 15 30 61 DN 65 DN 65
WDRIVE-1 XVM 32-5 3 400 11 15 30 66 DN 65 DN 65
WDRIVE-1 XVM 32-6-2 3 400 11 15 30 75 DN 65 DN 65
WDRIVE-1 XVM 32-6 3 400 11 15 30 83 DN 65 DN 65
WDRIVE-1 XVM 32-7-2 3 400 15 20 30 90 DN 65 DN 65
WDRIVE-1 XVM 32-7 3 400 15 20 30 97 DN 65 DN 65
WDRIVE-1 XVM 32-8-2 3 400 15 20 30 104 DN 65 DN 65
WDRIVE-1 XVM 32-8 3 400 15 20 30 111 DN 65 DN 65
WDRIVE-1 XVM 45-2-2 3 400 5,5 7,5 45 30 DN 80 DN 80

WDRIVE-1 XVM 45-2 3 400 7,5 10 45 39 DN 80 DN 80
WDRIVE-1 XVM 45-3-2 3 400 11 15 45 50 DN 80 DN 80
WDRIVE-1 XVM 45-3 3 400 11 15 45 58 DN 80 DN 80
WDRIVE-1 XVM 45-4-2 3 400 15 20 45 69 DN 80 DN 80
WDRIVE-1 XVM 45-4 3 400 15 20 45 77 DN 80 DN 80
WDRIVE-1 XVM 64-2-2 3 400 7,5 10 64 26 DN 100 DN 100

WDRIVE-1 XVM 64-2-1 3 400 11 15 64 34 DN 100 DN 100
WDRIVE-1 XVM 64-2 3 400 11 15 64 40 DN 100 DN 100
WDRIVE-1 XVM 64-3-2 3 400 15 20 64 46 DN 100 DN 100
WDRIVE-1 XVM 64-3-1 3 400 15 20 64 53 DN 100 DN 100
WDRIVE-1 XVM 90-2-2 3 400 11 15 85 30 DN 100 DN 100

WDRIVE-1 XVM 90-2 3 400 15 20 85 43 DN 100 DN 100
1102
WDRIVE 1
Performance Table

Model Phase
WDRIVE-1 WTX 32-200/3 3 400 3 4 18 30 DN 65 DN 50
WDRIVE-1 WTX 32-200/4 3 400 4 5,5 18 40 DN 65 DN 50
WDRIVE-1 WTX 32-200/5,5 3 400 5,5 7,5 18 47 DN 65 DN 50
WDRIVE-1 WTX 40-160/4 3 400 4 5,5 25 31 DN80 DN 65

WDRIVE-1 WTX 40-200/5,5 3 400 5,5 7,5 30 38 DN80 DN 65
WDRIVE-1 WTX 40-200/7,5 3 400 7,5 10 30 45 DN80 DN 65
WDRIVE-1 WTX 50-160/5,5 3 400 5,5 7,5 40 28 DN80 DN 65

WDRIVE-1 WTX 50-200/7,5 3 400 7,5 10 40 36 DN80 DN 65
WDRIVE-1 WTX 50-200/9,2 3 400 9,2 12,5 40 45 DN80 DN 65
WDRIVE-1 WTX 50-200/11 3 400 11 15 50 48 DN80 DN 65
WDRIVE-1 WTX 50-200/15 3 400 15 20 50 62 DN80 DN 65
WDRIVE-1 WTM 32-160/3 3 400 3 4 18 25 DN 65 DN50

WDRIVE-1 WTM 32-200/3 3 400 3 4 19 30 DN 65 DN50
WDRIVE-1 WTM 32-200/4 3 400 4 5,5 19 40 DN 65 DN50
WDRIVE-1 WTM 32-250/5,5 3 400 5,5 7,5 18 55 DN 65 DN50
WDRIVE-1 WTM 32-250/7,5 3 400 7,5 10 20 70 DN 65 DN50
WDRIVE-1 WTM 40-160/3 3 400 3 4 28 25 DN 80 DN 65

WDRIVE-1 WTM 40-160/4 3 400 4 5,5 32 30 DN 80 DN 65
WDRIVE-1 WTM 40-200/5,5 3 400 5,5 7,5 32 35 DN 80 DN 65
WDRIVE-1 WTM 40-200/7,5 3 400 7,5 10 32 45 DN 80 DN 65
WDRIVE-1 WTM 40-250/9,2 3 400 9,2 12,5 35 50 DN 80 DN 65
WDRIVE-1 WTM 40-250/11 3 400 11 15 35 55 DN 80 DN 65
WDRIVE-1 WTM 40-250/15 3 400 15 20 40 65 DN 80 DN 65
WDRIVE-1 WTM 50-160/5,5 3 400 5,5 7,5 60 25 DN 80 DN 65

WDRIVE-1 WTM 50-160/7,5 3 400 7,5 10 65 30 DN 80 DN 65
WDRIVE-1 WTM 50-200/9,2 3 400 9,2 12,5 60 38 DN 80 DN 65
WDRIVE-1 WTM 50-200/11 3 400 11 15 60 45 DN 80 DN 65
WDRIVE-1 WTM 50-250/15 3 400 15 20 60 55 DN 80 DN 65
1103
WDRIVE 1
Performance Table

Model Phase
WDRIVE-1 WTM 65-125/7,5 3 400 7,5 10 90 22 DN 100 DN 80
WDRIVE-1 WTM 65-160/9,2 3 400 9,2 12,5 100 25 DN 100 DN 80
WDRIVE-1 WTM 65-160/11 3 400 11 15 100 29 DN 100 DN 80
WDRIVE-1 WTM 65-160/15 3 400 15 20 105 35 DN 100 DN 80
WDRIVE-1 WTM 65-200/15 3 400 15 20 85 40 DN 100 DN 80
WDRIVE-1 WTM 80-160/11 3 400 11 15 140 22 DN 125 DN 100

WDRIVE-1 WTM 80-160/15 3 400 15 20 140 27 DN 125 DN 100
1104
WDRIVE 2
Performance Table

Model Phase
WDRIVE-2 XVM 1-7 3 230 2 x 0,37 2 x 0,55 2 x 1,6 33 1 1/2" 1 1/2"
WDRIVE-2 XVM 1-8 3 230 2 x 0,55 2 x 0,75 2 x 1,6 38 1½” 1½”
WDRIVE-2 XVM 1-9 3 230 2 x 0,55 2 x 0,75 2 x 1,6 44 1½” 1½”
WDRIVE-2 XVM 1-10 3 230 2 x 0,55 2 x 0,75 2 x 1,6 48 1½” 1½”
WDRIVE-2 XVM 1-11 3 230 2 x 0,55 2 x 0,75 2 x 1,6 54 1½” 1½”
WDRIVE-2 XVM 1-12 3 230 2 x 0,75 2x1 2 x 1,6 58 1½” 1½”
WDRIVE-2 XVM 1-13 3 230 2 x 0,75 2x1 2 x 1,6 63 1½” 1½”
WDRIVE-2 XVM 1-15 3 230 2 x 0,75 2x1 2 x 1,6 72 1½” 1½”
WDRIVE-2 XVM 1-17 3 230 2 x 1,1 2 x 1,5 2 x 1,6 81 1½” 1½”
WDRIVE-2 XVM 1-19 3 230 2 x 1,1 2 x 1,5 2 x 1,6 91 1½” 1½”
WDRIVE-2 XVM 1-21 3 230 2 x 1,1 2 x 1,5 2 x 1,6 101 1½” 1½”
WDRIVE-2 XVM 1-23 3 230 2 x 1,1 2 x 1,5 2 x 1,6 111 1½” 1½”
WDRIVE-2 XVM 1-25 3 230 2 x 1,5 2x2 2 x 1,6 121 1½” 1½”
WDRIVE-2 XVM 1-27 3 230 2 x 1,5 2x2 2 x 1,6 130 1½” 1½”
WDRIVE-2 XVM 1-30 3 230 2 x 1,5 2x2 2 x 1,6 145 1½” 1½”
WDRIVE-2 XVM 1-33 3 230 2 x 2,2 2x3 2 x 1,6 160 1½” 1½”
WDRIVE-2 XVM 1-36 3 230 2 x 2,2 2x3 2 x 1,6 174 1½” 1½”
WDRIVE-2 XVM 3-6 3 230 2 x 0,55 2 x 0,75 2x3 26 1½” 1½”

WDRIVE-2 XVM 3-7 3 230 2 x 0,55 2 x 0,75 2x3 30 1½” 1½”
WDRIVE-2 XVM 3-8 3 230 2 x 0,75 2x1 2x3 35 1½” 1½”
WDRIVE-2 XVM 3-9 3 230 2 x 0,75 2x1 2x3 39 1½” 1½”
WDRIVE-2 XVM 3-10 3 230 2 x 0,75 2x1 2x3 43 1½” 1½”
WDRIVE-2 XVM 3-11 3 230 2 x 1,1 2 x 1,5 2x3 48 1½” 1½”
WDRIVE-2 XVM 3-12 3 230 2 x 1,1 2 x 1,5 2x3 52 1½” 1½”
WDRIVE-2 XVM 3-13 3 230 2 x 1,1 2 x 1,5 2x3 57 1½” 1½”
WDRIVE-2 XVM 3-15 3 230 2 x 1,1 2 x 1,5 2x3 68 1½” 1½”
WDRIVE-2 XVM 3-17 3 230 2 x 1,5 2x2 2x3 79 1½” 1½”
WDRIVE-2 XVM 3-19 3 230 2 x 1,5 2x2 2x3 88 1½” 1½”
WDRIVE-2 XVM 3-21 3 230 2 x 2,2 2x3 2x3 97 1½” 1½”
WDRIVE-2 XVM 3-23 3 230 2 x 2,2 2x3 2x3 105 1½” 1½”
WDRIVE-2 XVM 3-25 3 230 2 x 2,2 2x3 2x3 113 1½” 1½”
1105
WDRIVE 2
Performance Table

Model Phase
WDRIVE-2 XVM 3-27 3 230 2 x 2,2 2x3 2x3 123 1½” 1½”
WDRIVE-2 XVM 3-29 3 230 2 x 2,2 2x3 2x3 132 1½” 1½”
WDRIVE-2 XVM 3-31 3 400 2x3 2x4 2x3 141 1½” 1½”
WDRIVE-2 XVM 3-33 3 400 2x3 2x4 2x3 150 1½” 1½”
WDRIVE-2 XVM 3-36 3 400 2x3 2x4 2x3 166 1½” 1½”
WDRIVE-2 XVM 5-6 3 230 2 x 1,1 2 x 1,5 2 x 5,5 28 2" 2"

WDRIVE-2 XVM 5-7 3 230 2 x 1,1 2 x 1,5 2 x 5,5 33 2” 2”
WDRIVE-2 XVM 5-8 3 230 2 x 1,1 2 x 1,5 2 x 5,5 38 2” 2”
WDRIVE-2 XVM 5-9 3 230 2 x 1,5 2x2 2 x 5,5 42 2” 2”
WDRIVE-2 XVM 5-10 3 230 2 x 1,5 2x2 2 x 5,5 47 2” 2”
WDRIVE-2 XVM 5-11 3 230 2 x 2,2 2x3 2 x 5,5 52 2” 2”
WDRIVE-2 XVM 5-12 3 230 2 x 2,2 2x3 2 x 5,5 58 2” 2”
WDRIVE-2 XVM 5-13 3 230 2 x 2,2 2x3 2 x 5,5 64 2” 2”
WDRIVE-2 XVM 5-14 3 230 2 x 2,2 2x3 2 x 5,5 69 2” 2”
WDRIVE-2 XVM 5-15 3 230 2 x 2,2 2x3 2 x 5,5 75 2” 2”
WDRIVE-2 XVM 5-16 3 230 2 x 2,2 2x3 2 x 5,5 80 2” 2”
WDRIVE-2 XVM 5-18 3 400 2x3 2x4 2 x 5,5 90 2” 2”
WDRIVE-2 XVM 5-20 3 400 2x3 2x4 2 x 5,5 99 2” 2”
WDRIVE-2 XVM 5-22 3 400 2x4 2 x 5,5 2 x 5,5 110 2” 2”
WDRIVE-2 XVM 5-24 3 400 2x4 2 x 5,5 2 x 5,5 120 2” 2”
WDRIVE-2 XVM 5-26 3 400 2x4 2 x 5,5 2 x 5,5 131 2” 2”
WDRIVE-2 XVM 5-29 3 400 2x4 2 x 5,5 2 x 5,5 150 2” 2”
WDRIVE-2 XVM 5-33 3 400 2 x 5,5 2 x 7,5 2 x 5,5 166 2” 2”
WDRIVE-2 XVM 5-36 3 400 2 x 5,5 2 x 7,5 2 x 5,5 188 2” 2”
WDRIVE-2 XVM 10-3 3 230 2 x 1,1 2 x 1,5 2 x 10 25 2½” 2½”

WDRIVE-2 XVM 10-4 3 230 2 x 1,5 2x2 2 x 10 32 2½” 2½”
WDRIVE-2 XVM 10-5 3 230 2 x 2,2 2x3 2 x 10 39 2½” 2½”
WDRIVE-2 XVM 10-6 3 230 2 x 2,2 2x3 2 x 10 46 2½” 2½”
WDRIVE-2 XVM 10-7 3 400 2x3 2x4 2 x 10 54 2½” 2½”
WDRIVE-2 XVM 10-8 3 400 2x3 2x4 2 x 10 62 2½” 2½”
WDRIVE-2 XVM 10-9 3 400 2x3 2x4 2 x 10 71 2½” 2½”
1106
WDRIVE 2
Performance Table

Model Phase
WDRIVE-2 XVM 10-10 3 400 2x4 2 x 5,5 2 x 10 81 2½” 2½”
WDRIVE-2 XVM 10-12 3 400 2x4 2 x 5,5 2 x 10 95 2½” 2½”
WDRIVE-2 XVM 10-14 3 400 2 x 5,5 2 x 7,5 2 x 10 110 2½” 2½”
WDRIVE-2 XVM 10-16 3 400 2 x 5,5 2 x 7,5 2 x 10 125 2½” 2½”
WDRIVE-2 XVM 10-18 3 400 2 x 7,5 2 x 10 2 x 10 144 2½” 2½”
WDRIVE-2 XVM 10-20 3 400 2 x 7,5 2 x 10 2 x 10 160 2½” 2½”
WDRIVE-2 XVM 10-22 3 400 2 x 7,5 2 x 10 2 x 10 178 2½” 2½”
WDRIVE-2 XVM 15-3 3 400 2x3 2x4 2 x 16 31 3” 2½”

WDRIVE-2 XVM 15-4 3 400 2x4 2 x 5,5 2 x 16 43 3” 2½”
WDRIVE-2 XVM 15-5 3 400 2x4 2 x 5,5 2 x 16 54 3” 2½”
WDRIVE-2 XVM 15-6 3 400 2 x 5,5 2 x 7,5 2 x 16 65 3” 2½”
WDRIVE-2 XVM 15-7 3 400 2 x 5,5 2 x 7,5 2 x 16 78 3” 2½”
WDRIVE-2 XVM 15-8 3 400 2 x 7,5 2 x 10 2 x 16 90 3” 2½”
WDRIVE-2 XVM 15-9 3 400 2 x 7,5 2 x 10 2 x 16 103 3” 2½”
WDRIVE-2 XVM 15-10 3 400 2 x 11 2 x 15 2 x 16 116 3” 2½”
WDRIVE-2 XVM 15-12 3 400 2 x 11 2 x 15 2 x 16 135 3” 2½”
WDRIVE-2 XVM 15-14 3 400 2 x 11 2 x 15 2 x 16 156 3” 2½”
WDRIVE-2 XVM 15-16 3 400 2 x 15 2 x 20 2 x 16 179 3” 2½”
WDRIVE-2 XVM 15-17 3 400 2 x 15 2 x 20 2 x 16 193 3” 2½”
WDRIVE-2 XVM 20-3 3 400 2x4 2 x 5,5 2 x 20 32 3" 3"

WDRIVE-2 XVM 20-4 3 400 2 x 5,5 2 x 7,5 2 x 20 43 3” 3”
WDRIVE-2 XVM 20-5 3 400 2 x 5,5 2 x 7,5 2 x 20 55 3” 3”
WDRIVE-2 XVM 20-6 3 400 2 x 7,5 2 x 10 2 x 20 66 3” 3”
WDRIVE-2 XVM 20-7 3 400 2 x 7,5 2 x 10 2 x 20 77 3” 3”
WDRIVE-2 XVM 20-8 3 400 2 x 11 2 x 15 2 x 20 89 3” 3”
WDRIVE-2 XVM 20-10 3 400 2 x 11 2 x 15 2 x 20 112 3” 3”
WDRIVE-2 XVM 20-12 3 400 2 x 15 2 x 20 2 x 20 136 3” 3”
WDRIVE-2 XVM 20-14 3 400 2 x 15 2 x 20 2 x 20 161 3” 3”
1107
WDRIVE 2
Performance Table

Model Phase
WDRIVE-2 XVM 32-2 3 400 2x4 2 x 5,5 2 x 30 26 DN 100 DN 100
WDRIVE-2 XVM 32-3-2 3 400 2x4 2 x 5,5 2 x 30 34 DN 100 DN 100
WDRIVE-2 XVM 32-3 3 400 2 x 5,5 2 x 7,5 2 x 30 39 DN 100 DN 100
WDRIVE-2 XVM 32-4-2 3 400 2 x 7,5 2 x 10 2 x 30 47 DN 100 DN 100
WDRIVE-2 XVM 32-4 3 400 2 x 7,5 2 x 10 2 x 30 53 DN 100 DN 100
WDRIVE-2 XVM 32-5-2 3 400 2 x 11 2 x 15 2 x 30 61 DN 100 DN 100
WDRIVE-2 XVM 32-5 3 400 2 x 11 2 x 15 2 x 30 66 DN 100 DN 100
WDRIVE-2 XVM 45-2-2 3 400 2 x 5,5 2 x 7,5 2 x 45 30 DN 125 DN 125



1108
WDRIVE 2
Performance Table
Motor Power Operating Diameter of Manifold

Model Recommended Voltage Flow
Phase Pressure Pressure Switch
Expansion Tank (lt) (V) kW HP (m3/h) Suction Discharge
(mWC)
WDRIVE-1 XHC 2-6T 100/10-N.Incl. 3 400 0,75 1 2,8 40 1" 1" Analog Sensor
WDRIVE-1 XHC 4-7 T 100/10-N.Incl. 3 400 1,5 2 4,5 55 1¼" 1" Analog Sensor
WDRIVE-1 WDM 25/150 T 100/10-N.Incl. 3 400 1,5 2 6 42 1½" 1" Analog Sensor
WDRIVE-1 WDM 25/220 T 100/10-N.Incl. 3 400 2,2 3 7 50 1½" 1" Analog Sensor
WDRIVE-1 WDM 32/300T 100/10-N.Incl. 3 400 3 4 8 55 1½" 1¼" Analog Sensor
WDRIVE-1 XHC 8-30 100/10-N.Incl. 3 400 1,85 2,5 7 40 1½" 1½" Analog Sensor
WDRIVE-1 XHC 8-35 100/10-N.Incl. 3 400 2,2 3 7 45 1½" 1½" Analog Sensor
WDRIVE-1 XHC 8-50 100/10-N.Incl. 3 400 3 4 7 62 1½" 1½" Analog Sensor
WDRIVE-1 XHC 12-30 100/10-N.Incl. 3 400 1,85 2,5 12 30 1½" 1½" Analog Sensor
WDRIVE-1 XHC 12-50 100/10-N.Incl. 3 400 3 4 12 50 1½" 1½" Analog Sensor
WDRIVE-1 XHC 16-30 100/10-N.Incl. 3 400 2,2 3 16 30 2" 2" Analog Sensor
WDRIVE-1 XHC 16-40 100/10-N.Incl. 3 400 3 4 16 42 2" 2" Analog Sensor
WDRIVE-1 XHC 20-30 100/10-N.Incl. 3 400 3 4 20 32 2" 2" Analog Sensor
WDRIVE-1 XHC 20-40 100/10-N.Incl. 3 400 4 5,5 20 40 2" 2" Analog Sensor

(mWC)
WDRIVE-2 XHC 2-6T 100/10-N.Incl. 3 400 2 x 0,75 2 x 1 2 x 2,8 40 1½" 1½" Analog Sensor
WDRIVE-2 XHC 4-7 T 100/10-N.Incl. 3 400 2 x 1,5 2 x 2 2 x 4,5 55 2" 1½" Analog Sensor
WDRIVE-2 WDM 25/150 T 100/10-N.Incl. 3 400 2 x 1,5 2 x 2 2 x 6 42 2" 1½" Analog Sensor
WDRIVE-2 WDM 25/220 T 100/10-N.Incl. 3 400 2 x 2,2 2 x 3 2 x 7 50 2" 1½" Analog Sensor
WDRIVE-2 WDM 32/300T 100/10-N.Incl. 3 400 2x3 2x4 2x8 55 2" 1½" Analog Sensor
WDRIVE-2 XHC 8-30 100/10-N.Incl. 3 400 2 x 1,85 2 x 2,5 2 x 7 40 2½" 2" Analog Sensor
WDRIVE-2 XHC 8-35 100/10-N.Incl. 3 400 2 x 2,2 2 x3 2x7 45 2½" 2" Analog Sensor
WDRIVE-2 XHC 8-40 100/10-N.Incl. 3 400 2 x 2,2 2 x 3 2 x 7 53 2½" 2" Analog Sensor
WDRIVE-2 XHC 8-50 100/10-N.Incl. 3 400 2x3 2x4 2x7 62 2½" 2" Analog Sensor
WDRIVE-2 XHC 12-30 100/10-N.Incl. 3 400 2 x 1,85 2 x 2,5 2 x 12 30 2½" 2½" Analog Sensor
WDRIVE-2 XHC 12-40 100/10-N.Incl. 3 400 2 x 2,2 2 x 3 2 x 12 40 2½" 2½" Analog Sensor
WDRIVE-2 XHC 12-50 100/10-N.Incl. 3 400 2x3 2 x 4 2 x 12 50 2½" 2½" Analog Sensor
WDRIVE-2 XHC 16-30 100/10-N.Incl. 3 400 2 x 2,2 2 x 3 2 x 16 30 3" 3" Analog Sensor
WDRIVE-2 XHC 16-40 100/10-N.Incl. 3 400 2x3 2 x 4 2 x 16 42 3" 3" Analog Sensor
WDRIVE-2 XHC 20-30 100/10-N.Incl. 3 400 2x3 2 x 4 2 x 20 32 3" 3" Analog Sensor
WDRIVE-2 XHC 20-40 100/10-N.Incl. 3 400 2 x 4 2 x 5,5 2 x 20 40 3" 3" Analog Sensor
1109
WDRIVE 2
Performance Table

(mWC)
WDRIVE-3 WDM 25/150 T 200/10-N.Incl. 3 400 3 x 1,5 3x2 3x8 30-45 2½" 2" Analog Sensor
WDRIVE-3 WDM 25/220 T 200/10-N.Incl. 3 400 3 x 2,2 3x3 3x9 40-55 2½" 2" Analog Sensor
WDRIVE-3 WDM 32/300T 300/10-N.Incl. 3 400 3x3 3x4 3 x 10 45-60 2½" 2½" Analog Sensor
WDRIVE-3 XHC 4-7 T 100/10-N.Incl. 3 400 3 x 1,5 3x2 3 x 4,5 55 2½" 2" Analog Sensor
WDRIVE-3 XHC 8-30 100/10-N.Incl. 3 400 3 x 1,85 3 x 2,5 3x7 40 3" 2½" Analog Sensor
WDRIVE-3 XHC 8-35 100/10-N.Incl. 3 400 3 x 2,2 2 x3 3x7 45 3" 2½" Analog Sensor
WDRIVE-3 XHC 8-40 100/10-N.Incl. 3 400 3 x 2,2 3x3 3x7 53 3" 2½" Analog Sensor
WDRIVE-3 XHC 8-50 100/10-N.Incl. 3 400 3x3 3x4 3x7 62 3" 2½" Analog Sensor
WDRIVE-3 XHC 12-30 100/10-N.Incl. 3 400 3 x 1,85 3 x 2,5 3 x 12 30 3" 2½" Analog Sensor
WDRIVE-3 XHC 12-40 100/10-N.Incl. 3 400 3 x 2,2 3x3 3 x 12 40 3" 2½" Analog Sensor
WDRIVE-3 XHC 12-50 100/10-N.Incl. 3 400 3x3 3x4 3 x 12 50 3" 2½" Analog Sensor
WDRIVE-3 XHC 16-30 100/10-N.Incl. 3 400 3 x 2,2 3x3 3 x 16 30 DN 100 3" Analog Sensor
WDRIVE-3 XHC 16-40 100/10-N.Incl. 3 400 3x3 3x4 3 x 16 42 DN 100 3" Analog Sensor
WDRIVE-3 XHC 20-30 100/10-N.Incl. 3 400 3x3 3x4 3 x 20 32 DN 100 3" Analog Sensor
WDRIVE-3 XHC 20-40 100/10-N.Incl. 3 400 3x4 3 x 5,5 3 x 20 40 DN 100 3" Analog Sensor
1110
WDRIVE 2
Performance Table

Model Phase
WDRIVE-2 WTX 32-200/3 3 400 2x3 2x4 2 x 18 30 DN 100 DN 100
WDRIVE-2 WTX 32-200/4 3 400 2x4 2 x 5,5 2 x 18 40 DN 100 DN 100
WDRIVE-2 WTX 32-200/5,5 3 400 2 x 5,5 2 x 7,5 2 x 18 47 DN 100 DN 100
WDRIVE-2 WTX 40-200/7,5 3 400 2 x 7,5 2 x 10 2 x 30 45 DN 200 DN 200
WDRIVE-2 WTX 50-200/11 3 400 2 x 11 2 x 15 2 x 50 48 DN 200 DN 200
WDRIVE-2 WTM 32-160/3 3 400 2x3 2x4 2 x 18 25 DN 80 DN 80
WDRIVE-2 WTM 32-200/4 3 400 2x4 2 x 5,5 2 x 19 40 DN 80 DN 80
WDRIVE-2 WTM 32-250/5,5 3 400 2 x 5,5 2 x 7,5 2 x 18 55 DN 80 DN 80
WDRIVE-2 WTM 32-250/7,5 3 400 2 x 7,5 2 x 10 2 x 20 70 DN 80 DN 80
WDRIVE-2 WTM 40-250/11 3 400 2 x 11 2 x 15 2 x 35 55 DN 100 DN 100
1111
WDRIVE 3
Performance Table

Model Phase
WDRIVE-3 XVM 1-11 3 230 3 x 0,55 3 x 0,75 3 x 1,6 54 2” 2”
WDRIVE-3 XVM 1-12 3 230 3 x 0,75 3x1 3 x 1,6 58 2” 2”
WDRIVE-3 XVM 1-13 3 230 3 x 0,75 3x1 3 x 1,6 63 2” 2”
WDRIVE-3 XVM 1-15 3 230 3 x 0,75 3x1 3 x 1,6 72 2” 2”
WDRIVE-3 XVM 1-17 3 230 3 x 1,1 3 x 1,5 3 x 1,6 81 2” 2”
WDRIVE-3 XVM 1-19 3 230 3 x 1,1 3 x 1,5 3 x 1,6 91 2” 2”
WDRIVE-3 XVM 1-21 3 230 3 x 1,1 3 x 1,5 3 x 1,6 101 2” 2”
WDRIVE-3 XVM 1-23 3 230 3 x 1,1 3 x 1,5 3 x 1,6 111 2” 2”
WDRIVE-3 XVM 1-25 3 230 3 x 1,5 3x2 3 x 1,6 121 2” 2”
WDRIVE-3 XVM 1-27 3 230 3 x 1,5 3x2 3 x 1,6 130 2” 2”
WDRIVE-3 XVM 1-30 3 230 3 x 1,5 3x2 3 x 1,6 145 2” 2”
WDRIVE-3 XVM 1-33 3 230 3 x 2,2 3x3 3 x 1,6 160 2” 2”
WDRIVE-3 XVM 1-36 3 230 3 x 2,2 3x3 3 x 1,6 174 2” 2”
WDRIVE-3 XVM 3-6 3 230 3 x 0,55 3 x 0,75 3x3 26 2” 2”

WDRIVE-3 XVM 3-7 3 230 3 x 0,55 3 x 0,75 3x3 30 2” 2”
WDRIVE-3 XVM 3-8 3 230 3 x 0,75 3x1 3x3 35 2” 2”
WDRIVE-3 XVM 3-9 3 230 3 x 0,75 3x1 3x3 39 2” 2”
WDRIVE-3 XVM 3-10 3 230 3 x 0,75 3x1 3x3 43 2” 2”
WDRIVE-3 XVM 3-11 3 230 3 x 1,1 3 x 1,5 3x3 48 2” 2”
WDRIVE-3 XVM 3-12 3 230 3 x 1,1 3 x 1,5 3x3 52 2” 2”
WDRIVE-3 XVM 3-13 3 230 3 x 1,1 3 x 1,5 3x3 57 2” 2”
WDRIVE-3 XVM 3-15 3 230 3 x 1,1 3 x 1,5 3x3 68 2” 2”
WDRIVE-3 XVM 3-17 3 230 3 x 1,5 3x2 3x3 79 2” 2”
WDRIVE-3 XVM 3-19 3 230 3 x 1,5 3x2 3x3 88 2” 2”
WDRIVE-3 XVM 3-21 3 230 3 x 2,2 3x3 3x3 97 2” 2”
WDRIVE-3 XVM 3-23 3 230 3 x 2,2 3x3 3x3 105 2” 2”
WDRIVE-3 XVM 3-25 3 230 3 x 2,2 3x3 3x3 113 2” 2”
WDRIVE-3 XVM 3-27 3 230 3 x 2,2 3x3 3x3 123 2” 2”
WDRIVE-3 XVM 3-29 3 230 3 x 2,2 3x3 3x3 132 2” 2”
WDRIVE-3 XVM 3-31 3 400 3x3 3x4 3x3 141 2” 2”
WDRIVE-3 XVM 3-33 3 400 3x3 3x4 3x3 150 2” 2”
WDRIVE-3 XVM 3-36 3 400 3x3 3x4 3x3 166 2” 2”
1112
WDRIVE 3
Performance Table

Model Phase
WDRIVE-3 XVM 5-6 3 230 3 x 1,1 3 x 1,5 3 x 5,5 28 2" 2"
WDRIVE-3 XVM 5-7 3 230 3 x 1,1 3 x 1,5 3 x 5,5 33 2” 2”
WDRIVE-3 XVM 5-8 3 230 3 x 1,1 3 x 1,5 3 x 5,5 38 2” 2”
WDRIVE-3 XVM 5-9 3 230 3 x 1,5 3x2 3 x 5,5 42 2” 2”
WDRIVE-3 XVM 5-10 3 230 3 x 1,5 3x2 3 x 5,5 47 2” 2”
WDRIVE-3 XVM 5-11 3 230 3 x 2,2 3x3 3 x 5,5 52 2” 2”
WDRIVE-3 XVM 5-12 3 230 3 x 2,2 3x3 3 x 5,5 58 2” 2”
WDRIVE-3 XVM 5-13 3 230 3 x 2,2 3x3 3 x 5,5 64 2” 2”
WDRIVE-3 XVM 5-14 3 230 3 x 2,2 3x3 3 x 5,5 69 2” 2”
WDRIVE-3 XVM 5-15 3 230 3 x 2,2 3x3 3 x 5,5 75 2” 2”
WDRIVE-3 XVM 5-16 3 230 3 x 2,2 3x3 3 x 5,5 80 2” 2”
WDRIVE-3 XVM 5-18 3 400 3x3 3x4 3 x 5,5 90 2” 2”
WDRIVE-3 XVM 5-20 3 400 3x3 3x4 3 x 5,5 99 2” 2”
WDRIVE-3 XVM 5-22 3 400 3x4 3 x 5,5 3 x 5,5 110 2” 2”
WDRIVE-3 XVM 5-24 3 400 3x4 3 x 5,5 3 x 5,5 120 2” 2”
WDRIVE-3 XVM 5-26 3 400 3x4 3 x 5,5 3 x 5,5 131 2” 2”
WDRIVE-3 XVM 5-29 3 400 3x4 3 x 5,5 3 x 5,5 150 2” 2”
WDRIVE-3 XVM 5-33 3 400 3 x 5,5 3 x 7,5 3 x 5,5 166 2” 2”
WDRIVE-3 XVM 5-36 3 400 3 x 5,5 3 x 7,5 3 x 5,5 188 2” 2”
WDRIVE-3 XVM 10-3 3 230 3 x 1,1 3 x 1,5 3 x 10 25 3” 3”

WDRIVE-3 XVM 10-4 3 230 3 x 1,5 3x2 3 x 10 32 3” 3”
WDRIVE-3 XVM 10-5 3 230 3 x 2,2 3x3 3 x 10 39 3” 3”
WDRIVE-3 XVM 10-6 3 230 3 x 2,2 3x3 3 x 10 46 3” 3”
WDRIVE-3 XVM 10-7 3 400 3x3 3x4 3 x 10 54 3” 3”
WDRIVE-3 XVM 10-8 3 400 3x3 3x4 3 x 10 62 3” 3”
WDRIVE-3 XVM 10-9 3 400 3x3 3x4 3 x 10 71 3” 3”
WDRIVE-3 XVM 10-10 3 400 3x4 3 x 5,5 3 x 10 81 3” 3”
WDRIVE-3 XVM 10-12 3 400 3x4 3 x 5,5 3 x 10 95 3” 3”
WDRIVE-3 XVM 10-14 3 400 3 x 5,5 3 x 7,5 3 x 10 110 3” 3”
WDRIVE-3 XVM 10-16 3 400 3 x 5,5 3 x 7,5 3 x 10 125 3” 3”
WDRIVE-3 XVM 10-18 3 400 3 x 7,5 3 x 10 3 x 10 144 3” 3”
WDRIVE-3 XVM 10-20 3 400 3 x 7,5 3 x 10 3 x 10 160 3” 3”
WDRIVE-3 XVM 10-22 3 400 3 x 7,5 3 x 10 3 x 10 178 3” 3”
1113
WDRIVE 3
Performance Table

Model Phase
WDRIVE-3 XVM 15-3 3 400 3x3 3x4 3 x 16 31 DN 100 3”
WDRIVE-3 XVM 15-4 3 400 3x4 3 x 5,5 3 x 16 43 DN 100 3”
WDRIVE-3 XVM 15-5 3 400 3x4 3 x 5,5 3 x 16 54 DN 100 3”
WDRIVE-3 XVM 15-6 3 400 3 x 5,5 3 x 7,5 3 x 16 65 DN 100 3”
WDRIVE-3 XVM 15-7 3 400 3 x 5,5 3 x 7,5 3 x 16 78 DN 100 3”
WDRIVE-3 XVM 15-8 3 400 3 x 7,5 3 x 10 3 x 16 90 DN 100 3”
WDRIVE-3 XVM 15-9 3 400 3 x 7,5 3 x 10 3 x 16 103 DN 100 3”
WDRIVE-3 XVM 15-10 3 400 3 x 11 3 x 15 3 x 16 116 DN 100 3”
WDRIVE-3 XVM 15-12 3 400 3 x 11 3 x 15 3 x 16 135 DN 100 3”
WDRIVE-3 XVM 15-14 3 400 3 x 11 3 x 15 3 x 16 156 DN 100 3”
WDRIVE-3 XVM 15-16 3 400 3 x 15 3 x 20 3 x 16 179 DN 100 3”
WDRIVE-3 XVM 15-17 3 400 3 x 15 3 x 20 3 x 16 193 DN 100 3”


1114
WDRIVE 3
Performance Table

Model Phase


1115
WDRIVE 3
Performance Table

Model Phase
WDRIVE-3 WTX 32-200/3 3 400 3x3 3x4 3 x 18 30 DN 100 DN 100
1116
WDRIVE 4
Performance Table

Model Phase
WDRIVE-4 XVM 1-7 3 230 4 x 0,37 4 x 0,55 4 x 1,6 33 2" 2"
WDRIVE-4 XVM 1-8 3 230 4 x 0,55 4 x 0,75 4 x 1,6 38 2” 2”
WDRIVE-4 XVM 1-9 3 230 4 x 0,55 4 x 0,75 4 x 1,6 44 2” 2”
WDRIVE-4 XVM 1-10 3 230 4 x 0,55 4 x 0,75 4 x 1,6 48 2” 2”
WDRIVE-4 XVM 1-11 3 230 4 x 0,55 4 x 0,75 4 x 1,6 54 2” 2”
WDRIVE-4 XVM 1-12 3 230 4 x 0,75 4x1 4 x 1,6 58 2” 2”
WDRIVE-4 XVM 1-13 3 230 4 x 0,75 4x1 4 x 1,6 63 2” 2”
WDRIVE-4 XVM 1-15 3 230 4 x 0,75 4x1 4 x 1,6 72 2” 2”
WDRIVE-4 XVM 1-17 3 230 4 x 1,1 4 x 1,5 4 x 1,6 81 2” 2”
WDRIVE-4 XVM 1-19 3 230 4 x 1,1 4 x 1,5 4 x 1,6 91 2” 2”
WDRIVE-4 XVM 1-21 3 230 4 x 1,1 4 x 1,5 4 x 1,6 101 2” 2”
WDRIVE-4 XVM 1-23 3 230 4 x 1,1 4 x 1,5 4 x 1,6 111 2” 2”
WDRIVE-4 XVM 1-25 3 230 4 x 1,5 4x2 4 x 1,6 121 2” 2”
WDRIVE-4 XVM 1-27 3 230 4 x 1,5 4x2 4 x 1,6 130 2” 2”
WDRIVE-4 XVM 1-30 3 230 4 x 1,5 4x2 4 x 1,6 145 2” 2”
WDRIVE-4 XVM 1-33 3 230 4 x 2,2 4x3 4 x 1,6 160 2” 2”
WDRIVE-4 XVM 1-36 3 230 4 x 2,2 4x3 4 x 1,6 174 2” 2”
WDRIVE-4 XVM 3-6 3 230 4 x 0,55 4 x 0,75 4x3 26 2” 2”

WDRIVE-4 XVM 3-7 3 230 4 x 0,55 4 x 0,75 4x3 30 2” 2”
WDRIVE-4 XVM 3-8 3 230 4 x 0,75 4x1 4x3 35 2” 2”
WDRIVE-4 XVM 3-9 3 230 4 x 0,75 4x1 4x3 39 2” 2”
WDRIVE-4 XVM 3-10 3 230 4 x 0,75 4x1 4x3 43 2” 2”
WDRIVE-4 XVM 3-11 3 230 4 x 1,1 4 x 1,5 4x3 48 2” 2”
WDRIVE-4 XVM 3-12 3 230 4 x 1,1 4 x 1,5 4x3 52 2” 2”
WDRIVE-4 XVM 3-13 3 230 4 x 1,1 4 x 1,5 4x3 57 2” 2”
WDRIVE-4 XVM 3-15 3 230 4 x 1,1 4 x 1,5 4x3 68 2” 2”
WDRIVE-4 XVM 3-17 3 230 4 x 1,5 4x2 4x3 79 2” 2”
WDRIVE-4 XVM 3-19 3 230 4 x 1,5 4x2 4x3 88 2” 2”
WDRIVE-4 XVM 3-21 3 230 4 x 2,2 4x3 4x3 97 2” 2”
WDRIVE-4 XVM 3-23 3 230 4 x 2,2 4x3 4x3 105 2” 2”
WDRIVE-4 XVM 3-25 3 230 4 x 2,2 4x3 4x3 113 2” 2”
WDRIVE-4 XVM 3-27 3 230 4 x 2,2 4x3 4x3 123 2” 2”
WDRIVE-4 XVM 3-29 3 230 4 x 2,2 4x3 4x3 132 2” 2”
WDRIVE-4 XVM 3-31 3 400 4x3 4x4 4x3 141 2” 2”
1117
WDRIVE 4
Performance Table

Model Phase
WDRIVE-4 XVM 3-33 3 400 4x3 4x4 4x3 150 2” 2”
WDRIVE-4 XVM 3-36 3 400 4x3 4x4 4x3 166 2” 2”
WDRIVE-4 XVM 5-6 3 230 4 x 1,1 4 x 1,5 4 x 5,5 28 2 1/2" 2 1/2"

WDRIVE-4 XVM 5-7 3 230 4 x 1,1 4 x 1,5 4 x 5,5 33 2½” 2½”
WDRIVE-4 XVM 5-8 3 230 4 x 1,1 4 x 1,5 4 x 5,5 38 2½” 2½”
WDRIVE-4 XVM 5-9 3 230 4 x 1,5 4x2 4 x 5,5 42 2½” 2½”
WDRIVE-4 XVM 5-10 3 230 4 x 1,5 4x2 4 x 5,5 47 2½” 2½”
WDRIVE-4 XVM 5-11 3 230 4 x 2,2 4x3 4 x 5,5 52 2½” 2½”
WDRIVE-4 XVM 5-12 3 230 4 x 2,2 4x3 4 x 5,5 58 2½” 2½”
WDRIVE-4 XVM 5-13 3 230 4 x 2,2 4x3 4 x 5,5 64 2½” 2½”
WDRIVE-4 XVM 5-14 3 230 4 x 2,2 4x3 4 x 5,5 69 2½” 2½”
WDRIVE-4 XVM 5-15 3 230 4 x 2,2 4x3 4 x 5,5 75 2½” 2½”
WDRIVE-4 XVM 5-16 3 230 4 x 2,2 4x3 4 x 5,5 80 2½” 2½”
WDRIVE-4 XVM 5-18 3 400 4x3 4x4 4 x 5,5 90 2½” 2½”
WDRIVE-4 XVM 5-20 3 400 4x3 4x4 4 x 5,5 99 2½” 2½”
WDRIVE-4 XVM 5-22 3 400 4x4 4 x 5,5 4 x 5,5 110 2½” 2½”
WDRIVE-4 XVM 5-24 3 400 4x4 4 x 5,5 4 x 5,5 120 2½” 2½”
WDRIVE-4 XVM 5-26 3 400 4x4 4 x 5,5 4 x 5,5 131 2½” 2½”
WDRIVE-4 XVM 5-29 3 400 4x4 4 x 5,5 4 x 5,5 150 2½” 2½”
WDRIVE-4 XVM 5-33 3 400 4 x 5,5 4 x 7,5 4 x 5,5 166 2½” 2½”
WDRIVE-4 XVM 5-36 3 400 4 x 5,5 4 x 7,5 4 x 5,5 188 2½” 2½”
WDRIVE-4 XVM 10-3 3 230 4 x 1,1 4 x 1,5 4 x 10 25 3” 3”

WDRIVE-4 XVM 10-4 3 230 4 x 1,5 4x2 4 x 10 32 3” 3”
WDRIVE-4 XVM 10-5 3 230 4 x 2,2 4x3 4 x 10 39 3” 3”
WDRIVE-4 XVM 10-6 3 230 4 x 2,2 4x3 4 x 10 46 3” 3”
WDRIVE-4 XVM 10-7 3 400 4x3 4x4 4 x 10 54 3” 3”
WDRIVE-4 XVM 10-8 3 400 4x3 4x4 4 x 10 62 3” 3”
WDRIVE-4 XVM 10-9 3 400 4x3 4x4 4 x 10 71 3” 3”
WDRIVE-4 XVM 10-10 3 400 4x4 4 x 5,5 4 x 10 81 3” 3”
WDRIVE-4 XVM 10-12 3 400 4x4 4 x 5,5 4 x 10 95 3” 3”
WDRIVE-4 XVM 10-14 3 400 4 x 5,5 4 x 7,5 4 x 10 110 3” 3”
WDRIVE-4 XVM 10-16 3 400 4 x 5,5 4 x 7,5 4 x 10 125 3” 3”
WDRIVE-4 XVM 10-18 3 400 4 x 7,5 4 x 10 4 x 10 144 3” 3”
WDRIVE-4 XVM 10-20 3 400 4 x 7,5 4 x 10 4 x 10 160 3” 3”
WDRIVE-4 XVM 10-22 3 400 4 x 7,5 4 x 10 4 x 10 178 3” 3”
1118
WDRIVE 4
Performance Table

Model Phase
WDRIVE-4 XVM 15-3 3 400 4x3 4x4 4 x 16 31 DN 100 DN 100


1119
WDRIVE 4
Performance Table

Model Phase


1120

Wdrive Boosters

Uploaded by

Copyright:

Available Formats

Wdrive Boosters

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wdrive Boosters

Uploaded by

Copyright:

Available Formats

WDRIVE

CONSTRUCTION Membrane Tank;

- Optimizes pump performance

Booster Set with XHC Series

Converter Main Pump

Not: Non return valve for

Automatic Water Boosters Frequency Converted Pump Units

Booster Set with XHC Series

Ball Valve with

Automatic Water Boosters Frequency Converted Pump Units

Booster Set with XVM Series

Automatic Water Boosters Frequency Converted Pump Units

Booster Set with XVM Series

Main Pump Fuse Box

Ball Valve with

Automatic Water Boosters with Frequency Converted Pump Units

Head: H(m) Q-H (m3/h-m)

Head: H(m) Q-H (m3/h-m)

NPSH NPSH Eta

Head: H(m) Q-H (m3/h-m)

NPSH NPSH Eta

Head: H(m) Q-H (m3/h-m)

NPSH NPSH Eta

Head: H(m) Q-H (m3/h-m)

NPSH NPSH Eta

Head: H(m) Q-H (m3/h-m)

NPSH NPSH Eta

P2 l/min 0 1 2 3 4,5 6 7,5 9 10,5

0,0 10,0 20,0 30,0 40,0 50,0 60,0 70,0

0,0 10,0 20,0 30,0 40,0 50,0 60,0 70,0

WTM 32-125 2900 rpm

FLOW RATE (Q) Part Material

WTM 32-160 2900 rpm

FLOW RATE (Q) Part Material

WTM 32-200 2900 rpm

FLOW RATE (Q) Part Material

WTM 32-250 2900 rpm

FLOW RATE ( Q ) Part Material

WTM 40-125 2900 rpm

FLOW RATE (Q) Part Material

WTM 40-160 2900 rpm

FLOW RATE (Q) Part Material

WTM 40-200 2900 rpm

FLOW RATE (Q) Part Material

WTM 40-250 2900 rpm

FLOW RATE (Q) Part Material

WTM 50-125 2900 rpm

FLOW RATE (Q) Part Material

WTM 50-160 2900 rpm

FLOW RATE (Q) Part Material

WTM 50-200 2900 rpm

FLOW RATE (Q) Part Material

WTM 50-250 2900 rpm

FLOW RATE (Q) Part Material

WTM 65-125 2900 rpm

FLOW RATE (Q) Part Material

WTM 65-160 2900 rpm

FLOW RATE (Q) Part Material

WTM 65-200 2900 rpm